x SuSE Linux 13.1-RELEASE x
x SuSE Linux 13.1-RELEASEx
PDFTEX(1) Web2C 2013 PDFTEX(1)
NAME
pdftex, pdfinitex, pdfvirtex - PDF output from TeX
SYNOPSIS
pdftex [options] [&format] [file|\commands]
DESCRIPTION
Run the pdfTeX typesetter on file, usually creating file.pdf. If the
file argument has no extension, ".tex" will be appended to it. Instead
of a filename, a set of pdfTeX commands can be given, the first of
which must start with a backslash. With a &format argument pdfTeX uses
a different set of precompiled commands, contained in format.fmt; it is
usually better to use the -fmt format option instead.
pdfTeX is a version of TeX, with the e-TeX extensions, that can create
PDF files as well as DVI files.
In DVI mode, pdfTeX can be used as a complete replacement for the TeX
engine.
The typical use of pdfTeX is with a pregenerated formats for which PDF
output has been enabled. The pdftex command uses the equivalent of the
plain TeX format, and the pdflatex command uses the equivalent of the
LaTeX format. To generate formats, use the -ini switch.
The pdfinitex and pdfvirtex commands are pdfTeX's analogues to the ini-
tex and virtex commands. In this installation, if the links exist,
they are symbolic links to the pdftex executable.
In PDF mode, pdfTeX can natively handle the PDF, JPG, JBIG2, and PNG
graphics formats. pdfTeX cannot include PostScript or Encapsulated
PostScript (EPS) graphics files; first convert them to PDF using
epstopdf(1). pdfTeX's handling of its command-line arguments is simi-
lar to that of of the other TeX programs in the web2c implementation.
OPTIONS
This version of pdfTeX understands the following command line options.
-draftmode
Sets \pdfdraftmode so pdfTeX doesn't write a PDF and doesn't
read any included images, thus speeding up execution.
-enc Enable the encTeX extensions. This option is only effective in
combination with -ini. For documentation of the encTeX exten-
sions see http://www.olsak.net/enctex.html.
-etex Enable the e-TeX extensions. This option is only effective in
combination with -ini. See etex(1).
-file-line-error
Print error messages in the form file:line:error which is simi-
lar to the way many compilers format them.
-no-file-line-error
Disable printing error messages in the file:line:error style.
-file-line-error-style
This is the old name of the -file-line-error option.
-fmt format
Use format as the name of the format to be used, instead of the
name by which pdfTeX was called or a %& line.
-halt-on-error
Exit with an error code when an error is encountered during pro-
cessing.
-help Print help message and exit.
-ini Start in INI mode, which is used to dump formats. The INI mode
can be used for typesetting, but no format is preloaded, and
basic initializations like setting catcodes may be required.
-interaction mode
Sets the interaction mode. The mode can be either batchmode,
nonstopmode, scrollmode, and errorstopmode. The meaning of
these modes is the same as that of the corresponding \commands.
-ipc Send DVI or PDF output to a socket as well as the usual output
file. Whether this option is available is the choice of the in-
staller.
-ipc-start
As -ipc, and starts the server at the other end as well.
Whether this option is available is the choice of the installer.
-jobname name
Use name for the job name, instead of deriving it from the name
of the input file.
-kpathsea-debug bitmask
Sets path searching debugging flags according to the bitmask.
See the Kpathsea manual for details.
-mktex fmt
Enable mktexfmt, where fmt must be either tex or tfm.
-mltex Enable MLTeX extensions. Only effective in combination with
-ini.
-no-mktex fmt
Disable mktexfmt, where fmt must be either tex or tfm.
-output-comment string
In DVI mode, use string for the DVI file comment instead of the
date. This option is ignored in PDF mode.
-output-directory directory
Write output files in directory instead of the current direc-
tory. Look up input files in directory first, the along the
normal search path.
-output-format format
Set the output format mode, where format must be either pdf or
dvi. This also influences the set of graphics formats under-
stood by pdfTeX.
-parse-first-line
If the first line of the main input file begins with %& parse it
to look for a dump name or a -translate-file option.
-no-parse-first-line
Disable parsing of the first line of the main input file.
-progname name
Pretend to be program name. This affects both the format used
and the search paths.
-recorder
Enable the filename recorder. This leaves a trace of the files
opened for input and output in a file with extension .fls.
-shell-escape
Enable the \write18{command} construct. The command can be any
shell command. This construct is normally disallowed for secu-
rity reasons.
-no-shell-escape
Disable the \write18{command} construct, even if it is enabled
in the texmf.cnf file.
-src-specials
In DVI mode, insert source specials into the DVI file. This
option is ignored in PDF mode.
-src-specials where
In DVI mode, insert source specials in certain placed of the DVI
file. where is a comma-separated value list: cr, display, hbox,
math, par, parent, or vbox. This option is ignored in PDF mode.
-translate-file tcxname
Use the tcxname translation table to set the mapping of input
characters and re-mapping of output characters.
-default-translate-file tcxname
Like -translate-file except that a %& line can overrule this
setting.
-version
Print version information and exit.
ENVIRONMENT
See the Kpathsearch library documentation (the `Path specifications'
node) for precise details of how the environment variables are used.
The kpsewhich utility can be used to query the values of the variables.
One caveat: In most pdfTeX formats, you cannot use ~ in a filename you
give directly to pdfTeX, because ~ is an active character, and hence is
expanded, not taken as part of the filename. Other programs, such as
Metafont, do not have this problem.
TEXMFOUTPUT
Normally, pdfTeX puts its output files in the current directory.
If any output file cannot be opened there, it tries to open it
in the directory specified in the environment variable TEXMFOUT-
PUT. There is no default value for that variable. For example,
if you say pdftex paper and the current directory is not
writable and TEXMFOUTPUT has the value /tmp, pdfTeX attempts to
create /tmp/paper.log (and /tmp/paper.pdf, if any output is pro-
duced.) TEXMFOUTPUT is also checked for input files, as TeX
often generates files that need to be subsequently read; for
input, no suffixes (such as ``.tex'') are added by default, the
input name is simply checked as given.
TEXINPUTS
Search path for \input and \openin files. This should start
with ``.'', so that user files are found before system files.
An empty path component will be replaced with the paths defined
in the texmf.cnf file. For example, set TEXINPUTS to
".:/home/user/tex:" to prepend the current directory and
``/home/user/tex'' to the standard search path.
TEXFORMATS
Search path for format files.
TEXPOOL
search path for pdftex internal strings.
TEXEDIT
Command template for switching to editor. The default, usually
vi, is set when pdfTeX is compiled.
TFMFONTS
Search path for font metric (.tfm) files.
FILES
The location of the files mentioned below varies from system to system.
Use the kpsewhich utility to find their locations.
pdftex.pool
Text file containing pdfTeX's internal strings.
pdftex.map
Filename mapping definitions.
*.tfm Metric files for pdfTeX's fonts.
*.fmt Predigested pdfTeX format (.fmt) files.
NOTES
Starting with version 1.40, pdfTeX incorporates the e-TeX extensions,
and pdfeTeX is just a copy of pdfTeX. See etex(1). This manual page
is not meant to be exhaustive. The complete documentation for this
version of pdfTeX can be found in the pdfTeX manual and the info manual
Web2C: A TeX implementation.
BUGS
This version of pdfTeX implements a number of optional extensions. In
fact, many of these extensions conflict to a greater or lesser extent
with the definition of pdfTeX. When such extensions are enabled, the
banner printed when pdfTeX starts is changed to print pdfTeXk instead
of pdfTeX.
This version of pdfTeX fails to trap arithmetic overflow when dimen-
sions are added or subtracted. Cases where this occurs are rare, but
when it does the generated DVI file will be invalid. Whether a gener-
ated PDF file would be usable is unknown.
AVAILABILITY
pdfTeX is available for a large variety of machine architectures and
operation systems. pdfTeX is part of all major TeX distributions.
Information on how to get pdfTeX and related information is available
at the http://www.pdftex.org pdfTeX web site.
The following pdfeTeX related mailing list is available: pdf-
tex@tug.org. This is a mailman list; to subscribe send a message con-
taining subscribe to pdftex-request@tug.org. A web interface and list
archives can be found at the http://lists.tug.org/pdftex mailing list
web site.
SEE ALSO
epstopdf(1), etex(1), latex(1), mptopdf(1), tex(1), mf(1).
http://tug.org/applications/pdftex, http://tug.org/web2c.
AUTHORS
The primary authors of pdfTeX are Han The Thanh, Petr Sojka, Jiri Zla-
tuska, and Peter Breitenlohner (eTeX).
TeX was designed by Donald E. Knuth, who implemented it using his Web
system for Pascal programs. It was ported to Unix at Stanford by
Howard Trickey, and at Cornell by Pavel Curtis. The version now
offered with the Unix TeX distribution is that generated by the Web to
C system (web2c), originally written by Tomas Rokicki and Tim Morgan.
The encTeX extensions were written by Petr Olsak.
pdftex 1.40 1 March 2011 PDFTEX(1)
Want to link to this manual page? Use this URL:
<http://star2.abcm.com/cgi-bin/bsdi-man?query=pdftex&sektion=1&manpath=>