x SuSE Linux 13.1-RELEASE x
x SuSE Linux 13.1-RELEASEx
RECV(2) Linux Programmer's Manual RECV(2)
NAME
recv, recvfrom, recvmsg - receive a message from a socket
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
ssize_t recv(int sockfd, void *buf, size_t len, int flags);
ssize_t recvfrom(int sockfd, void *buf, size_t len, int flags,
struct sockaddr *src_addr, socklen_t *addrlen);
ssize_t recvmsg(int sockfd, struct msghdr *msg, int flags);
DESCRIPTION
The recv(), recvfrom(), and recvmsg() calls are used to receive mes-
sages from a socket. They may be used to receive data on both connec-
tionless and connection-oriented sockets. This page first describes
common features of all three system calls, and then describes the dif-
ferences between the calls.
All three calls return the length of the message on successful comple-
tion. If a message is too long to fit in the supplied buffer, excess
bytes may be discarded depending on the type of socket the message is
received from.
If no messages are available at the socket, the receive calls wait for
a message to arrive, unless the socket is nonblocking (see fcntl(2)),
in which case the value -1 is returned and the external variable errno
is set to EAGAIN or EWOULDBLOCK. The receive calls normally return any
data available, up to the requested amount, rather than waiting for
receipt of the full amount requested.
An application can use select(2), poll(2), or epoll(7) to determine
when more data arrives on a socket.
The flags argument
The flags argument is formed by ORing one or more of the following val-
ues:
MSG_CMSG_CLOEXEC (recvmsg() only; since Linux 2.6.23)
Set the close-on-exec flag for the file descriptor received via
a UNIX domain file descriptor using the SCM_RIGHTS operation
(described in unix(7)). This flag is useful for the same rea-
sons as the O_CLOEXEC flag of open(2).
MSG_DONTWAIT (since Linux 2.2)
Enables nonblocking operation; if the operation would block, the
call fails with the error EAGAIN or EWOULDBLOCK (this can also
be enabled using the O_NONBLOCK flag with the F_SETFL fcntl(2)).
MSG_ERRQUEUE (since Linux 2.2)
This flag specifies that queued errors should be received from
the socket error queue. The error is passed in an ancillary
message with a type dependent on the protocol (for IPv4
IP_RECVERR). The user should supply a buffer of sufficient
size. See cmsg(3) and ip(7) for more information. The payload
of the original packet that caused the error is passed as normal
data via msg_iovec. The original destination address of the
datagram that caused the error is supplied via msg_name.
For local errors, no address is passed (this can be checked with
the cmsg_len member of the cmsghdr). For error receives, the
MSG_ERRQUEUE is set in the msghdr. After an error has been
passed, the pending socket error is regenerated based on the
next queued error and will be passed on the next socket opera-
tion.
The error is supplied in a sock_extended_err structure:
#define SO_EE_ORIGIN_NONE 0
#define SO_EE_ORIGIN_LOCAL 1
#define SO_EE_ORIGIN_ICMP 2
#define SO_EE_ORIGIN_ICMP6 3
struct sock_extended_err
{
uint32_t ee_errno; /* error number */
uint8_t ee_origin; /* where the error originated */
uint8_t ee_type; /* type */
uint8_t ee_code; /* code */
uint8_t ee_pad; /* padding */
uint32_t ee_info; /* additional information */
uint32_t ee_data; /* other data */
/* More data may follow */
};
struct sockaddr *SO_EE_OFFENDER(struct sock_extended_err *);
ee_errno contains the errno number of the queued error. ee_ori-
gin is the origin code of where the error originated. The other
fields are protocol-specific. The macro SOCK_EE_OFFENDER
returns a pointer to the address of the network object where the
error originated from given a pointer to the ancillary message.
If this address is not known, the sa_family member of the sock-
addr contains AF_UNSPEC and the other fields of the sockaddr are
undefined. The payload of the packet that caused the error is
passed as normal data.
For local errors, no address is passed (this can be checked with
the cmsg_len member of the cmsghdr). For error receives, the
MSG_ERRQUEUE is set in the msghdr. After an error has been
passed, the pending socket error is regenerated based on the
next queued error and will be passed on the next socket opera-
tion.
MSG_OOB
This flag requests receipt of out-of-band data that would not be
received in the normal data stream. Some protocols place expe-
dited data at the head of the normal data queue, and thus this
flag cannot be used with such protocols.
MSG_PEEK
This flag causes the receive operation to return data from the
beginning of the receive queue without removing that data from
the queue. Thus, a subsequent receive call will return the same
data.
MSG_TRUNC (since Linux 2.2)
For raw (AF_PACKET), Internet datagram (since Linux
2.4.27/2.6.8), netlink (since Linux 2.6.22), and UNIX datagram
(since Linux 3.4) sockets: return the real length of the packet
or datagram, even when it was longer than the passed buffer.
For use with Internet stream sockets, see tcp(7).
MSG_WAITALL (since Linux 2.2)
This flag requests that the operation block until the full
request is satisfied. However, the call may still return less
data than requested if a signal is caught, an error or discon-
nect occurs, or the next data to be received is of a different
type than that returned.
recvfrom()
recvfrom() places the received message into the buffer buf. The caller
must specify the size of the buffer in len.
If src_addr is not NULL, and the underlying protocol provides the
source address of the message, that source address is placed in the
buffer pointed to by src_addr. In this case, addrlen is a value-result
argument. Before the call, it should be initialized to the size of the
buffer associated with src_addr. Upon return, addrlen is updated to
contain the actual size of the source address. The returned address is
truncated if the buffer provided is too small; in this case, addrlen
will return a value greater than was supplied to the call.
If the caller is not interested in the source address, src_addr should
be specified as NULL and addrlen should be specified as 0.
recv()
The recv() call is normally used only on a connected socket (see con-
nect(2)). It is equivalent to the call:
recvfrom(fd, buf, len, flags, NULL, 0));
recvmsg()
The recvmsg() call uses a msghdr structure to minimize the number of
directly supplied arguments. This structure is defined as follows in
<sys/socket.h>:
struct iovec { /* Scatter/gather array items */
void *iov_base; /* Starting address */
size_t iov_len; /* Number of bytes to transfer */
};
struct msghdr {
void *msg_name; /* optional address */
socklen_t msg_namelen; /* size of address */
struct iovec *msg_iov; /* scatter/gather array */
size_t msg_iovlen; /* # elements in msg_iov */
void *msg_control; /* ancillary data, see below */
size_t msg_controllen; /* ancillary data buffer len */
int msg_flags; /* flags on received message */
};
The msg_name field points to a caller-allocated buffer that is used to
return the source address if the socket is unconnected. The caller
should set msg_namelen to the size of this buffer before this call;
upon return from a successful call, msg_name will contain the length of
the returned address. If the application does not need to know the
source address, msg_name can be specified as NULL.
The fields msg_iov and msg_iovlen describe scatter-gather locations, as
discussed in readv(2).
The field msg_control, which has length msg_controllen, points to a
buffer for other protocol control-related messages or miscellaneous
ancillary data. When recvmsg() is called, msg_controllen should con-
tain the length of the available buffer in msg_control; upon return
from a successful call it will contain the length of the control mes-
sage sequence.
The messages are of the form:
struct cmsghdr {
socklen_t cmsg_len; /* data byte count, including hdr */
int cmsg_level; /* originating protocol */
int cmsg_type; /* protocol-specific type */
/* followed by
unsigned char cmsg_data[]; */
};
Ancillary data should be accessed only by the macros defined in
cmsg(3).
As an example, Linux uses this ancillary data mechanism to pass
extended errors, IP options, or file descriptors over UNIX domain sock-
ets.
The msg_flags field in the msghdr is set on return of recvmsg(). It
can contain several flags:
MSG_EOR
indicates end-of-record; the data returned completed a record
(generally used with sockets of type SOCK_SEQPACKET).
MSG_TRUNC
indicates that the trailing portion of a datagram was discarded
because the datagram was larger than the buffer supplied.
MSG_CTRUNC
indicates that some control data were discarded due to lack of
space in the buffer for ancillary data.
MSG_OOB
is returned to indicate that expedited or out-of-band data were
received.
MSG_ERRQUEUE
indicates that no data was received but an extended error from
the socket error queue.
RETURN VALUE
These calls return the number of bytes received, or -1 if an error
occurred. In the event of an error, errno is set to indicate the
error.
When a stream socket peer has performed an orderly shutdown, the return
value will be 0 (the traditional "end-of-file" return).
Datagram sockets in various domains (e.g., the UNIX and Internet
domains) permit zero-length datagrams. When such a datagram is
received, the return value is 0.
The value 0 may also be returned if the requested number of bytes to
receive from a stream socket was 0.
ERRORS
These are some standard errors generated by the socket layer. Addi-
tional errors may be generated and returned from the underlying proto-
col modules; see their manual pages.
EAGAIN or EWOULDBLOCK
The socket is marked nonblocking and the receive operation would
block, or a receive timeout had been set and the timeout expired
before data was received. POSIX.1-2001 allows either error to
be returned for this case, and does not require these constants
to have the same value, so a portable application should check
for both possibilities.
EBADF The argument sockfd is an invalid descriptor.
ECONNREFUSED
A remote host refused to allow the network connection (typically
because it is not running the requested service).
EFAULT The receive buffer pointer(s) point outside the process's
address space.
EINTR The receive was interrupted by delivery of a signal before any
data were available; see signal(7).
EINVAL Invalid argument passed.
ENOMEM Could not allocate memory for recvmsg().
ENOTCONN
The socket is associated with a connection-oriented protocol and
has not been connected (see connect(2) and accept(2)).
ENOTSOCK
The argument sockfd does not refer to a socket.
CONFORMING TO
4.4BSD (these function calls first appeared in 4.2BSD), POSIX.1-2001.
POSIX.1-2001 describes only the MSG_OOB, MSG_PEEK, and MSG_WAITALL
flags.
NOTES
The prototypes given above follow glibc2. The Single UNIX Specifica-
tion agrees, except that it has return values of type ssize_t (while
4.x BSD and libc4 and libc5 all have int). The flags argument is int
in 4.x BSD, but unsigned int in libc4 and libc5. The len argument is
int in 4.x BSD, but size_t in libc4 and libc5. The addrlen argument is
int * in 4.x BSD, libc4 and libc5. The present socklen_t * was
invented by POSIX. See also accept(2).
According to POSIX.1-2001, the msg_controllen field of the msghdr
structure should be typed as socklen_t, but glibc currently types it as
size_t.
See recvmmsg(2) for information about a Linux-specific system call that
can be used to receive multiple datagrams in a single call.
EXAMPLE
An example of the use of recvfrom() is shown in getaddrinfo(3).
SEE ALSO
fcntl(2), getsockopt(2), read(2), recvmmsg(2), select(2), shutdown(2),
socket(2), cmsg(3), sockatmark(3), socket(7)
COLOPHON
This page is part of release 3.69 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
http://www.kernel.org/doc/man-pages/.
Linux 2014-05-10 RECV(2)
Want to link to this manual page? Use this URL:
<http://star2.abcm.com/cgi-bin/bsdi-man?query=recvfrom&sektion=2&manpath=>