x SuSE Linux 13.1-RELEASE x
x SuSE Linux 13.1-RELEASEx
selinux_config(5) SELinux configuration file selinux_config(5)
NAME
config - The SELinux sub-system configuration file.
DESCRIPTION
The SELinux config file controls the state of SELinux regarding:
1. The policy enforcement status - enforcing, permissive or
disabled.
2. The policy name or type that forms a path to the policy to
be loaded and its supporting configuration files.
3. How SELinux-aware login applications should behave if no
valid SELinux users are configured.
4. Whether the system is to be relabeled or not.
The entries controlling these functions are described in the FILE FOR-
MAT section.
The fully qualified path name of the SELinux configuration file is
/etc/selinux/config.
If the config file is missing or corrupt, then no SELinux policy is
loaded (i.e. SELinux is disabled).
The sestatus (8) command and the libselinux function selinux_path (3)
will return the location of the config file.
FILE FORMAT
The config file supports the following parameters:
SELINUX = enforcing | permissive | disabled
SELINUXTYPE = policy_name
REQUIRESEUSERS = 0 | 1
AUTORELABEL = 0 | 1
Where:
SELINUX
This entry can contain one of three values:
enforcing
SELinux security policy is enforced.
permissive
SELinux security policy is not enforced but logs the
warnings (i.e. the action is allowed to proceed).
disabled
No SELinux policy is loaded. This option was used to
disable SELinux completely, which is now deprecated.
Use the selinux=0 kernel boot option instead (see
selinux(8)).
The entry can be determined using the sestatus(8) command or
selinux_getenforcemode(3).
SELINUXTYPE
The policy_name entry is used to identify the policy type, and
becomes the directory name of where the policy and its configu-
ration files are located.
The entry can be determined using the sestatus(8) command or
selinux_getpolicytype(3).
The policy_name is relative to a path that is defined within the
SELinux subsystem that can be retrieved by using
selinux_path(3). An example entry retrieved by selinux_path(3)
is:
/etc/selinux/
The policy_name is then appended to this and becomes the 'policy
root' location that can be retrieved by selinux_pol-
icy_root_path(3). An example entry retrieved is:
/etc/selinux/targeted
The actual binary policy is located relative to this directory
and also has a policy name pre-allocated. This information can
be retrieved using selinux_binary_policy_path(3). An example en-
try retrieved by selinux_binary_policy_path(3) is:
/etc/selinux/targeted/policy/policy
The binary policy name has by convention the SELinux policy ver-
sion that it supports appended to it. The maximum policy version
supported by the kernel can be determined using the sestatus(8)
command or security_policyvers(3). An example binary policy file
with the version is:
/etc/selinux/targeted/policy/policy.24
REQUIRESEUSERS
This optional entry can be used to fail a login if there is no
matching or default entry in the seusers(5) file or if the
seusers file is missing.
It is checked by getseuserbyname(3) that is called by SELinux-
aware login applications such as PAM(8).
If set to 0 or the entry missing:
getseuserbyname(3) will return the GNU / Linux user name
as the SELinux user.
If set to 1:
getseuserbyname(3) will fail.
The getseuserbyname(3) man page should be consulted for its use.
The format of the seusers file is shown in seusers(5).
AUTORELABEL
This is an optional entry that allows the file system to be re-
labeled.
If set to 0 and there is a file called .autorelabel in the root
directory, then on a reboot, the loader will drop to a shell
where a root login is required. An administrator can then manu-
ally relabel the file system.
If set to 1 or no entry present (the default) and there is a
.autorelabel file in the root directory, then the file system
will be automatically relabeled using fixfiles -F restore
In both cases the /.autorelabel file will be removed so that re-
labeling is not done again.
EXAMPLE
This example config file shows the minimum contents for a system to run
SELinux in enforcing mode, with a policy_name of 'targeted':
SELINUX = enforcing
SELINUXTYPE = targeted
SEE ALSO
selinux(8), sestatus(8), selinux_path(3), selinux_policy_root_path(3),
selinux_binary_policy_path(3), getseuserbyname(3), PAM(8), fixfiles(8),
selinux_mkload_policy(3), selinux_getpolicytype(3), security_poli-
cyvers(3), selinux_getenforcemode(3), seusers(5)
Security Enhanced Linux 18 Nov 2011 selinux_config(5)
Want to link to this manual page? Use this URL:
<http://star2.abcm.com/cgi-bin/bsdi-man?query=selinux_config&sektion=5&manpath=>