x SuSE Linux 13.1-RELEASE x
x SuSE Linux 13.1-RELEASEx
SHMOP(2) Linux Programmer's Manual SHMOP(2)
NAME
shmat, shmdt - System V shared memory operations
SYNOPSIS
#include <sys/types.h>
#include <sys/shm.h>
void *shmat(int shmid, const void *shmaddr, int shmflg);
int shmdt(const void *shmaddr);
DESCRIPTION
shmat()
shmat() attaches the System V shared memory segment identified by shmid
to the address space of the calling process. The attaching address is
specified by shmaddr with one of the following criteria:
* If shmaddr is NULL, the system chooses a suitable (unused) address
at which to attach the segment.
* If shmaddr isn't NULL and SHM_RND is specified in shmflg, the attach
occurs at the address equal to shmaddr rounded down to the nearest
multiple of SHMLBA.
* Otherwise, shmaddr must be a page-aligned address at which the
attach occurs.
In addition to SHM_RND, the following flags may be specified in the
shmflg bit-mask argument:
SHM_EXEC (Linux-specific; since Linux 2.6.9)
Allow the contents of the segment to be executed. The caller
must have execute permission on the segment.
SHM_RDONLY
Attach the segment for read-only access. The process must have
read permission for the segment. If this flag is not specified,
the segment is attached for read and write access, and the
process must have read and write permission for the segment.
There is no notion of a write-only shared memory segment.
SHM_REMAP (Linux-specific)
This flag specifies that the mapping of the segment should
replace any existing mapping in the range starting at shmaddr
and continuing for the size of the segment. (Normally, an EIN-
VAL error would result if a mapping already exists in this
address range.) In this case, shmaddr must not be NULL.
The brk(2) value of the calling process is not altered by the attach.
The segment will automatically be detached at process exit. The same
segment may be attached as a read and as a read-write one, and more
than once, in the process's address space.
A successful shmat() call updates the members of the shmid_ds structure
(see shmctl(2)) associated with the shared memory segment as follows:
shm_atime is set to the current time.
shm_lpid is set to the process-ID of the calling process.
shm_nattch is incremented by one.
shmdt()
shmdt() detaches the shared memory segment located at the address spec-
ified by shmaddr from the address space of the calling process. The
to-be-detached segment must be currently attached with shmaddr equal to
the value returned by the attaching shmat() call.
On a successful shmdt() call, the system updates the members of the
shmid_ds structure associated with the shared memory segment as fol-
lows:
shm_dtime is set to the current time.
shm_lpid is set to the process-ID of the calling process.
shm_nattch is decremented by one. If it becomes 0 and the seg-
ment is marked for deletion, the segment is deleted.
RETURN VALUE
On success, shmat() returns the address of the attached shared memory
segment; on error, (void *) -1 is returned, and errno is set to indi-
cate the cause of the error.
On success, shmdt() returns 0; on error -1 is returned, and errno is
set to indicate the cause of the error.
ERRORS
When shmat() fails, errno is set to one of the following:
EACCES The calling process does not have the required permissions for
the requested attach type, and does not have the CAP_IPC_OWNER
capability.
EIDRM shmid points to a removed identifier.
EINVAL Invalid shmid value, unaligned (i.e., not page-aligned and
SHM_RND was not specified) or invalid shmaddr value, or can't
attach segment at shmaddr, or SHM_REMAP was specified and
shmaddr was NULL.
ENOMEM Could not allocate memory for the descriptor or for the page
tables.
When shmdt() fails, errno is set as follows:
EINVAL There is no shared memory segment attached at shmaddr; or,
shmaddr is not aligned on a page boundary.
CONFORMING TO
SVr4, POSIX.1-2001.
In SVID 3 (or perhaps earlier), the type of the shmaddr argument was
changed from char * into const void *, and the returned type of shmat()
from char * into void *. (Linux libc4 and libc5 have the char * proto-
types; glibc2 has void *.)
NOTES
After a fork(2), the child inherits the attached shared memory seg-
ments.
After an execve(2), all attached shared memory segments are detached
from the process.
Upon _exit(2), all attached shared memory segments are detached from
the process.
Using shmat() with shmaddr equal to NULL is the preferred, portable way
of attaching a shared memory segment. Be aware that the shared memory
segment attached in this way may be attached at different addresses in
different processes. Therefore, any pointers maintained within the
shared memory must be made relative (typically to the starting address
of the segment), rather than absolute.
On Linux, it is possible to attach a shared memory segment even if it
is already marked to be deleted. However, POSIX.1-2001 does not spec-
ify this behavior and many other implementations do not support it.
The following system parameter affects shmat():
SHMLBA Segment low boundary address multiple. Must be page aligned.
For the current implementation, the SHMLBA value is PAGE_SIZE.
The implementation places no intrinsic per-process limit on the number
of shared memory segments (SHMSEG).
SEE ALSO
brk(2), mmap(2), shmctl(2), shmget(2), capabilities(7), shm_over-
view(7), svipc(7)
COLOPHON
This page is part of release 3.69 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
http://www.kernel.org/doc/man-pages/.
Linux 2014-04-28 SHMOP(2)
Want to link to this manual page? Use this URL:
<http://star2.abcm.com/cgi-bin/bsdi-man?query=shmat&sektion=2&manpath=>