OpenSuSE Man Pages

home | help

IPC::Run3::ProfArrayBuffer (3): Store profile events in RAM in an array
IPC::Run3::ProfArrayBuffer (3pm): Store profile events in RAM in an array
__alloc_skb (9): allocate a network buffer
__relay_reset (9): reset a channel buffer
__skb_queue_after (9): queue a buffer at the list head
__snd_rawmidi_transmit_peek (9): copy data from the internal buffer
ares_create_query (3): Compose a single-question DNS query buffer
ares_mkquery (3): Compose a single-question DNS query buffer
ata_scsi_rbuf_get (9): Map response buffer.
ata_scsi_rbuf_put (9): Unmap response buffer.
audit_log_format (9): format a message into the audit buffer.
audit_log_start (9): obtain an audit buffer
bdflush (2): start, flush, or tune buffer-dirty-flush daemon
bh_submit_read (9): Submit a locked buffer for reading
bh_uptodate_or_lock (9): Test whether the buffer is uptodate
bio_copy_data (9): copy contents of data buffers from one chain of bios t...
BIO_f_buffer (3osslssl-3): buffering BIO
BIO_f_readbuffer (3osslssl-3): read only buffering BIO that supports BIO_tel...
BIO_get_buffer_num_lines (3osslssl-3): buffering BIO
BIO_new_buffer_ssl_connect (3osslssl-3): SSL BIO
BIO_set_buffer_read_data (3osslssl-3): buffering BIO
BIO_set_buffer_size (3osslssl-3): buffering BIO
BIO_set_read_buffer_size (3osslssl-3): buffering BIO
BIO_set_write_buffer_size (3osslssl-3): buffering BIO
bitmap_parse_user (9): convert an ASCII hex string in a user buffer into a b...
blk_queue_bounce_limit (9): set bounce buffer limit for queue
blk_queue_dma_drain (9): Set up a drain buffer for excess dma.
block_invalidatepage (9): invalidate part or all of a buffer-backed page
buffchan (8): Buffered file-writing backend for INN
build_skb (9): build a network buffer
check_pattern (9): [GENERIC] check if a pattern is in the buffer
check_short_pattern (9): [GENERIC] check if a pattern is in the buffer
cnfsstat (8): Show usage of CNFS buffers
crc16 (9): compute the CRC-16 for the data buffer
crc7_be (9): update the CRC7 for the data buffer
crc_ccitt (9): recompute the CRC for the data buffer
crc_itu_t (9): Compute the CRC-ITU-T for the data buffer
CURLOPT_BUFFERSIZE (3): receive buffer size
CURLOPT_ERRORBUFFER (3): error buffer for error messages
CURLOPT_UPLOAD_BUFFERSIZE (3): upload buffer size
DBE (3): Double Buffer Extension
dma_buf_kmap (9): Map a page of the buffer object into kernel address sp...
dma_buf_kmap_atomic (9): Map a page of the buffer object into kernel address...
dma_buf_put (9): decreases refcount of the buffer
dma_buf_unmap_attachment (9): unmaps and decreases usecount of the buffer;mi...
dma_buf_vmap (9): Create virtual mapping for the buffer object into kern...
dmesg (1): print or control the kernel ring buffer
drm_crtc_check_viewport (9): Checks that a framebuffer is big enough for the...
drm_framebuffer_cleanup (9): remove a framebuffer object
drm_framebuffer_init (9): initialize a framebuffer
drm_framebuffer_lookup (9): look up a drm framebuffer and grab a reference
drm_framebuffer_reference (9): incr the fb refcnt
drm_framebuffer_remove (9): remove and unreference a framebuffer object
drm_framebuffer_unreference (9): unref a framebuffer
drm_framebuffer_unregister_private (9): unregister a private fb from the loo...
drm_helper_mode_fill_fb_struct (9): fill out framebuffer metadata
edd_show_raw_data (9): copies raw data to buffer for userspace to parse
fbdev (4): video driver for framebuffer device
fbdevhw (4): os-specific submodule for framebuffer device access
fbtest (8): test if a virtual console is mapped to a frame buffer ...
field_buffer (3form): field buffer control
field_status (3form): field buffer control
flush (n): Flush buffered output for a channel
fmemopen (3p): open a memory buffer stream
form_field_buffer (3form): field buffer control
generic_make_request (9): hand a buffer to its device driver for I/O
generic_pipe_buf_confirm (9): verify contents of the pipe buffer
generic_pipe_buf_get (9): get a reference to a struct pipe_buffer
generic_pipe_buf_release (9): put a reference to a struct pipe_buffer
generic_pipe_buf_steal (9): attempt to take ownership of a pipe_buffer
getunwind (2): copy the unwind data to caller's buffer
glAccum (3gl): operate on the accumulation buffer
glClear (3gl): clear buffers to preset values
glClearAccum (3gl): specify clear values for the accumulation buffer
glClearColor (3gl): specify clear values for the color buffers
glClearDepth (3gl): specify the clear value for the depth buffer
glClearIndex (3gl): specify the clear value for the color index buffers
glClearStencil (3gl): specify the clear value for the stencil buffer
glColorMask (3gl): enable and disable writing of frame buffer color compo...
glCopyPixels (3gl): copy pixels in the frame buffer
glDepthFunc (3gl): specify the value used for depth buffer comparisons
glDepthMask (3gl): enable or disable writing into the depth buffer
glDrawBuffer (3gl): specify which color buffers are to be drawn into
glDrawPixels (3gl): write a block of pixels to the frame buffer
glFeedbackBuffer (3gl): controls feedback mode
glPassThrough (3gl): place a marker in the feedback buffer
glReadBuffer (3gl): select a color buffer source for pixels
glReadPixels (3gl): read a block of pixels from the frame buffer
glSelectBuffer (3gl): establish a buffer for selection mode values
glutSwapBuffers (3): swaps the buffers of the current window if double buff...
glXSwapBuffers (3gl): exchange front and back buffers
gnutls_buffer_append_data (3): API function
hcd_buffer_create (9): initialize buffer pools
hcd_buffer_destroy (9): deallocate buffer pools
hdmi_audio_infoframe_pack (9): write HDMI audio infoframe to binary buffer
hdmi_avi_infoframe_pack (9): write HDMI AVI infoframe to binary buffer
hdmi_infoframe_pack (9): write a HDMI infoframe to binary buffer
hdmi_spd_infoframe_pack (9): write HDMI SPD infoframe to binary buffer
hdmi_vendor_infoframe_pack (9): write a HDMI vendor infoframe to binary buffer
i2o_msg_post_wait_mem (9): Post and wait a message with DMA buffers
i915_cmd_parser_init_ring (9): set cmd parser related fields for a ringbuffer
i915_parse_cmds (9): parse a submitted batch buffer for privilege violations
ieee80211_get_buffered_bc (9): accessing buffered broadcast and multicast fr...
ieee80211_sta_set_buffered (9): inform mac80211 about driver-buffered frames
initChainBuffers (9): Allocate memory for and initialize chain buffers
IO::Compress::Brotli (3): Write Brotli buffers/streams
IO::Compress::Bzip2 (3): Write bzip2 files/buffers
IO::Compress::Deflate (3): Write RFC 1950 files/buffers
IO::Compress::Gzip (3): Write RFC 1952 files/buffers
IO::Compress::RawDeflate (3): Write RFC 1951 files/buffers
IO::Compress::Zip (3): Write zip files/buffers
IO::Uncompress::AnyInflate (3): Uncompress zlib-based (zip, gzip) file/buffer
IO::Uncompress::Brotli (3): Read Brotli buffers/streams
IO::Uncompress::Bunzip2 (3): Read bzip2 files/buffers
IO::Uncompress::Gunzip (3): Read RFC 1952 files/buffers
IO::Uncompress::Inflate (3): Read RFC 1950 files/buffers
IO::Uncompress::RawInflate (3): Read RFC 1951 files/buffers
IO::Uncompress::Unzip (3): Read zip files/buffers
journal_dirty_data (9): mark a buffer as containing dirty data to be flushed
journal_dirty_metadata (9): mark a buffer as containing dirty metadata
journal_extend (9): extend buffer credits.
journal_forget (9): bforget for potentially-journaled buffers.
journal_get_write_access (9): notify intent to modify a buffer for metadata ...
journal_try_to_free_buffers (9): try to free page buffers.
kfifo_alloc (9): dynamically allocates a new fifo buffer
kfifo_init (9): initialize a fifo using a preallocated buffer
syslog (2): read and/or clear kernel message ring buffer; set cons...
klogctl (3): read and/or clear kernel message ring buffer; set cons...
kmsg_dump_get_buffer (9): copy kmsg log lines
Log::Log4perl::Appender::Buffer (3): Buffering Appender
Log::Log4perl::Appender::TestArrayBuffer (3): Subclass of Appender::TestBuffer
Log::Log4perl::Appender::TestBuffer (3): Appender class for testing
Log::Log4perl::JavaMap::TestBuffer (3): wraps Log::Log4perl::Appender::TestB...
mangle_path (9): mangle and copy path to buffer beginning
mark_buffer_dirty (9): mark a buffer_head as needing writeout
menu_pattern (3menu): get and set a menu's pattern buffer
modesetting (4): video driver for framebuffer device
mpool (3): shared memory buffer pool
mpt_host_page_access_control (9): control the IOC's Host Page Buffer access
mpt_print_ioc_summary (9): Write ASCII summary of IOC to a buffer.
ne_buffer (3): string buffer handling
ne_buffer_altered (3): clear, grow, or mark as altered a string buffer
ne_buffer_append (3): append data to a string buffer
ne_buffer_clear (3): clear, grow, or mark as altered a string buffer
ne_buffer_concat (3): append data to a string buffer
ne_buffer_create (3): create a string buffer
ne_buffer_destroy (3): destroy a buffer object
ne_buffer_finish (3): destroy a buffer object
ne_buffer_grow (3): clear, grow, or mark as altered a string buffer
ne_buffer_ncreate (3): create a string buffer
ne_buffer_zappend (3): append data to a string buffer
ne_set_request_body_buffer (3): include a message body with a request
netif_receive_skb (9): process receive buffer from network
netif_rx (9): post buffer to the network code
open_memstream (3p): open a dynamic memory buffer stream
pattern (3menu): get and set a menu's pattern buffer
pcap_set_buffer_size (3pcap): set the buffer size for a not-yet-activated ca...
pcap_set_timeout (3pcap): set the packet buffer timeout for a not-yet-activa...
preadv (2): read or write data into multiple buffers
pskb_put (9): add data to the tail of a potentially fragmented buffer
pskb_trim_unique (9): remove end from a paged unique (not cloned) buffer
pwritev (2): read or write data into multiple buffers
rdma_reg_msgs (3): register data buffer(s) for sending or receiving messa...
rdma_reg_read (3): register data buffer(s) for remote RDMA read access.
rdma_reg_write (3): register data buffer(s) for remote RDMA write access.
readv (2): read or write data into multiple buffers
register_framebuffer (9): registers a frame buffer device
relay_alloc_buf (9): allocate a channel buffer
relay_buf_empty (9): boolean, is the channel buffer empty?
relay_buf_full (9): boolean, is the channel buffer full?
relay_close_buf (9): close a channel buffer
relay_create_buf (9): allocate and initialize a channel buffer
relay_destroy_buf (9): destroy an rchan_buf struct and associated buffer
relay_file_read_subbuf_avail (9): return bytes available in sub-buffer
relay_mmap_buf (9): mmap channel buffer to process address space
relay_remove_buf (9): remove a channel buffer
relay_subbufs_consumed (9): update the buffer's sub-buffers-consumed count
relay_switch_subbuf (9): switch to a new sub-buffer
rpc_free (9): free buffer allocated via rpc_malloc
rpc_malloc (9): allocate an RPC buffer
scan_read_oob (9): [GENERIC] Scan data+OOB region to buffer
scnprintf (9): Format a string and place it in a buffer
scsi_build_sense_buffer (9): build sense data in a buffer
SDL_Flip (3): Swaps screen buffers
SDL_GL_SwapBuffers (3): Swap OpenGL framebuffers/Update Display
SDLmm_Display (3): The video frame buffer surface.
seq_escape (9): print string into buffer, escaping some characters
seq_pad (9): write padding spaces to buffer
seq_write (9): write arbitrary data to buffer
set_field_buffer (3form): field buffer control
set_field_status (3form): field buffer control
set_max_field (3form): field buffer control
set_menu_pattern (3menu): get and set a menu's pattern buffer
setbuf (3): stream buffering operations
setbuf (3p): assign buffering to a stream
setbuffer (3): stream buffering operations
setlinebuf (3): stream buffering operations
setvbuf (3): stream buffering operations
setvbuf (3p): assign buffering to a stream
sg_rbuf (8): reads data using SCSI READ BUFFER command
sg_read_buffer (8): send SCSI READ BUFFER command
sg_write_buffer (8): send SCSI WRITE BUFFER command
skb_append (9): append a buffer
skb_availroom (9): bytes at buffer end
skb_cloned (9): is the buffer a clone
skb_copy_bits (9): copy bits from skb to kernel buffer
skb_copy_ubufs (9): copy userspace skb frags buffers to kernel
skb_cow_data (9): Check that a socket buffer's data buffers are writable
skb_get (9): reference buffer
skb_headroom (9): bytes at buffer head
skb_insert (9): insert a buffer
skb_orphan (9): orphan a buffer
skb_orphan_frags (9): orphan the frags contained in a buffer
skb_pull (9): remove data from the start of a buffer
skb_push (9): add data to the start of a buffer
skb_put (9): add data to a buffer
skb_queue_head (9): queue a buffer at the list head
skb_queue_tail (9): queue a buffer at the list tail
skb_share_check (9): check if buffer is shared and if so clone it
skb_shared (9): is the buffer shared
skb_store_bits (9): store bits from kernel buffer to skb
skb_tailroom (9): bytes at buffer end
skb_trim (9): remove end from a buffer
skb_unlink (9): remove a buffer from a list
skb_unshare (9): make a copy of a shared buffer
smart_agetty (1): Emulate agetty for a non vga/framebuffer console
snd_dma_alloc_pages (9): allocate the buffer area according to the given type
snd_dma_alloc_pages_fallback (9): allocate the buffer area according to the ...
snd_dma_free_pages (9): release the allocated buffer
snd_dma_pointer (9): return the current pointer to DMA transfer buffer in b...
snd_info_get_line (9): read one line from the procfs buffer
snd_iprintf (9): printf on the procfs buffer
snd_pcm_capture_empty (9): check whether the capture buffer is empty
snd_pcm_capture_ready (9): check whether the capture buffer is available
snd_pcm_format_set_silence (9): set the silence data on the buffer
snd_pcm_lib_alloc_vmalloc_32_buffer (9): allocate 32-bit-addressable buffer
snd_pcm_lib_alloc_vmalloc_buffer (9): allocate virtual DMA buffer
snd_pcm_lib_free_pages (9): release the allocated DMA buffer.
snd_pcm_lib_free_vmalloc_buffer (9): free vmalloc buffer
snd_pcm_lib_get_vmalloc_page (9): map vmalloc buffer offset to page struct
snd_pcm_lib_malloc_pages (9): allocate the DMA buffer
snd_pcm_lib_preallocate_free_for_all (9): release all pre-allocated buffers ...
snd_pcm_playback_data (9): check whether any data exists on the playback buffer
snd_pcm_playback_empty (9): check whether the playback buffer is empty
snd_pcm_playback_ready (9): check whether the playback buffer is available
snd_rawmidi_transmit (9): copy from the buffer to the device
snd_rawmidi_transmit_empty (9): check whether the output buffer is empty
snd_rawmidi_transmit_peek (9): copy data from the internal buffer
snprintf (9): Format a string and place it in a buffer
sprintf (9): Format a string and place it in a buffer
sscanf (9): Unformat a buffer into a list of arguments
SSL_alloc_buffers (3osslssl-3): manage SSL structure buffers
SSL_CTX_set_default_read_buffer_len (3osslssl-3): Control fragment size sett...
SSL_free_buffers (3osslssl-3): manage SSL structure buffers
SSL_has_pending (3osslssl-3): check for readable bytes buffered in an SSL ob...
SSL_pending (3osslssl-3): check for readable bytes buffered in an SSL object
SSL_set_default_read_buffer_len (3osslssl-3): Control fragment size settings...
stdbuf (1): Run COMMAND, with modified buffering operations for it...
stdio.h (0p): standard buffered input/output
strlcpy (9): Copy a C-string into a sized buffer
struct_nand_buffers (9): buffer structure for read/write
struct_pipe_buffer (9): a linux kernel pipe buffer
struct_sk_buff (9): socket buffer
struct_spi_transfer (9): a read/write buffer pair
svc_xprt_names (9): format a buffer with a list of transport names
sync (2): commit buffer cache to disk
sync_mapping_buffers (9): write out & wait upon a mapping's associated...
syncfs (2): commit buffer cache to disk
Tcl_ChannelBuffered (3): procedures for creating and manipulating channels
Tcl_Close (3): buffered I/O facilities using channels
Tcl_DetachChannel (3): buffered I/O facilities using channels
Tcl_Eof (3): buffered I/O facilities using channels
Tcl_Flush (3): buffered I/O facilities using channels
Tcl_GetChannel (3): buffered I/O facilities using channels
Tcl_GetChannelBufferSize (3): procedures for creating and manipulating channels
Tcl_GetChannelNames (3): buffered I/O facilities using channels
Tcl_GetChannelNamesEx (3): buffered I/O facilities using channels
Tcl_GetChannelOption (3): buffered I/O facilities using channels
Tcl_Gets (3): buffered I/O facilities using channels
Tcl_GetsObj (3): buffered I/O facilities using channels
Tcl_InputBlocked (3): buffered I/O facilities using channels
Tcl_InputBuffered (3): buffered I/O facilities using channels
Tcl_IsStandardChannel (3): buffered I/O facilities using channels
Tcl_MakeFileChannel (3): buffered I/O facilities using channels
Tcl_OpenCommandChannel (3): buffered I/O facilities using channels
Tcl_OpenFileChannel (3): buffered I/O facilities using channels
Tcl_OutputBuffered (3): buffered I/O facilities using channels
Tcl_Read (3): buffered I/O facilities using channels
Tcl_ReadChars (3): buffered I/O facilities using channels
Tcl_ReadRaw (3): buffered I/O facilities using channels
Tcl_RegisterChannel (3): buffered I/O facilities using channels
Tcl_Seek (3): buffered I/O facilities using channels
Tcl_SetChannelBufferSize (3): procedures for creating and manipulating channels
Tcl_SetChannelOption (3): buffered I/O facilities using channels
Tcl_Tell (3): buffered I/O facilities using channels
Tcl_TruncateChannel (3): buffered I/O facilities using channels
Tcl_Ungets (3): buffered I/O facilities using channels
Tcl_UnregisterChannel (3): buffered I/O facilities using channels
Tcl_Write (3): buffered I/O facilities using channels
Tcl_WriteChars (3): buffered I/O facilities using channels
Tcl_WriteObj (3): buffered I/O facilities using channels
Tcl_WriteRaw (3): buffered I/O facilities using channels
Tie::Hash::NamedCapture (3): Named regexp capture buffers
TIFFbuffer (3tiff): I/O buffering control routines
trace_block_bio_bounce (9): used bounce buffer when processing block operation
trace_block_dirty_buffer (9): mark a buffer dirty
trace_block_touch_buffer (9): mark a buffer accessed
trace_printk (9): printf formatting in the ftrace buffer
trace_puts (9): write a string into the ftrace buffer
unbuffer (1): unbuffer output
unregister_framebuffer (9): releases a frame buffer device
usb_alloc_coherent (9): allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
usb_buffer_dmasync (9): synchronize DMA and CPU view of buffer(s)
usb_buffer_dmasync_sg (9): synchronize DMA and CPU view of scatterlist buffe...
usb_buffer_map (9): create DMA mapping(s) for an urb
usb_buffer_map_sg (9): create scatterlist DMA mapping(s) for an endpoint
usb_buffer_unmap (9): free DMA mapping(s) for an urb
usb_buffer_unmap_sg (9): free DMA mapping(s) for a scatterlist
usb_descriptor_fillbuf (9): fill buffer with descriptors
usb_hub_clear_tt_buffer (9): clear control/bulk TT state in high speed hub
vfs_readahead (8): pre-load the kernel buffer cache
vscnprintf (9): Format a string and place it in a buffer
vsnprintf (9): Format a string and place it in a buffer
vsprintf (9): Format a string and place it in a buffer
vsscanf (9): Unformat a buffer into a list of arguments
writev (2): read or write data into multiple buffers
xcb_dri2_buffer_swap_complete_event_t (3): (unknown subject)
xcb_dri2_get_buffers (3): (unknown subject)
xcb_dri2_get_buffers_buffers (3): (unknown subject)
xcb_dri2_get_buffers_buffers_iterator (3): (unknown subject)
xcb_dri2_get_buffers_buffers_length (3): (unknown subject)
xcb_dri2_get_buffers_reply (3): (unknown subject)
xcb_dri2_get_buffers_unchecked (3): (unknown subject)
xcb_dri2_get_buffers_with_format (3): (unknown subject)
xcb_dri2_get_buffers_with_format_buffers (3): (unknown subject)
xcb_dri2_get_buffers_with_format_buff... (3): (unknown subject)
xcb_dri2_get_buffers_with_format_buff... (3): (unknown subject)
xcb_dri2_get_buffers_with_format_reply (3): (unknown subject)
xcb_dri2_get_buffers_with_format_unch... (3): (unknown subject)
xcb_dri2_invalidate_buffers_event_t (3): (unknown subject)
xcb_dri2_swap_buffers (3): (unknown subject)
xcb_dri2_swap_buffers_reply (3): (unknown subject)
xcb_dri2_swap_buffers_unchecked (3): (unknown subject)
xcb_dri3_buffer_from_pixmap (3): (unknown subject)
xcb_dri3_buffer_from_pixmap_reply (3): (unknown subject)
xcb_dri3_buffer_from_pixmap_unchecked (3): (unknown subject)
xcb_dri3_buffers_from_pixmap (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_buffers (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_buffers_end (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_buffers_... (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_offsets (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_offsets_end (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_offsets_... (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_reply (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_strides (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_strides_end (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_strides_... (3): (unknown subject)
xcb_dri3_buffers_from_pixmap_unchecked (3): (unknown subject)
xcb_dri3_pixmap_from_buffer (3): (unknown subject)
xcb_dri3_pixmap_from_buffer_checked (3): (unknown subject)
xcb_dri3_pixmap_from_buffers (3): (unknown subject)
xcb_dri3_pixmap_from_buffers_checked (3): (unknown subject)
xcb_glx_buffer_swap_complete_event_t (3): (unknown subject)
xcb_glx_create_pbuffer (3): (unknown subject)
xcb_glx_create_pbuffer_checked (3): (unknown subject)
xcb_glx_destroy_pbuffer (3): (unknown subject)
xcb_glx_destroy_pbuffer_checked (3): (unknown subject)
xcb_glx_feedback_buffer (3): (unknown subject)
xcb_glx_feedback_buffer_checked (3): (unknown subject)
xcb_glx_pbuffer_clobber_event_t (3): (unknown subject)
xcb_glx_select_buffer (3): (unknown subject)
xcb_glx_select_buffer_checked (3): (unknown subject)
xcb_glx_swap_buffers (3): (unknown subject)
xcb_glx_swap_buffers_checked (3): (unknown subject)
xcutsel (1): interchange between cut buffer and selection
XdbeAllocateBackBufferName (3): allocates a DBE buffer.
XdbeDeallocateBackBufferName (3): frees a DBE buffer.
xdbedizzy (1): demo of DBE creating a double buffered spinning scene
XdbeGetBackBufferAttributes (3): returns attributes of a DBE buffer.
XdbeSwapBuffers (3): swaps front and back DBE buffers.
XDGACloseFramebuffer (3): Client library for the XFree86-DGA extension.
XDGAOpenFramebuffer (3): Client library for the XFree86-DGA extension.
XDisplayMotionBufferSize (3): send events and pointer motion history structure
xdr_commit_encode (9): Ensure all data is written to buffer
xdr_reserve_space (9): Reserve buffer space for sending
xdr_restrict_buflen (9): decrease available buffer space
xdr_set_scratch_buffer (9): Attach a scratch buffer for decoding data.
xdr_skb_read_bits (9): copy some data bits from skb to internal buffer
xdr_truncate_encode (9): truncate an encode buffer
xdr_write_pages (9): Insert a list of pages into an XDR buffer for sending
XEventsQueued (3): handle output buffer or event queue
XFetchBuffer (3): manipulate cut and paste buffers
XFetchBytes (3): manipulate cut and paste buffers
XFlush (3): handle output buffer or event queue
Xmbuf (3): X multibuffering functions
XmbufChangeBufferAttributes (3): X multibuffering functions
XmbufChangeWindowAttributes (3): X multibuffering functions
XmbufCreateBuffers (3): X multibuffering functions
XmbufCreateStereoWindow (3): X multibuffering functions
XmbufDestroyBuffers (3): X multibuffering functions
XmbufDisplayBuffers (3): X multibuffering functions
XmbufGetBufferAttributes (3): X multibuffering functions
XmbufGetScreenInfo (3): X multibuffering functions
XmbufGetVersion (3): X multibuffering functions
XmbufGetWindowAttributes (3): X multibuffering functions
XmbufQueryExtension (3): X multibuffering functions
XPending (3): handle output buffer or event queue
xprt_wait_for_buffer_space (9): wait for transport output buffer to clear
xprt_write_space (9): wake the task waiting for transport output buffer space
XRotateBuffers (3): manipulate cut and paste buffers
XStoreBuffer (3): manipulate cut and paste buffers
XStoreBytes (3): manipulate cut and paste buffers
XSync (3): handle output buffer or event queue
Xvfb (1): virtual framebuffer X server for X Version 11
zip_source_buffer (3): create zip data source from buffer

home | help