OpenSuSE Man Pages
home |
help
- admin (1p)
- create and administer SCCS files (DEVELOPMENT)
- autofs.udisks (5)
- autofs configuration for local removable devices
- axfer (1)
- command-line sound recorder and player for sound devic...
- axfer-list (1)
- dump lists of available sound devices and nodes to tra...
- axfer-transfer (1)
- transferrer of audio data frame for sound devices and ...
- badblocks (8)
- search a device for bad blocks
- blkdeactivate (8)
- utility to deactivate block devices
- blkdiscard (8)
- discard sectors on a device
- blkid (8)
- locate/print block device attributes
- blkpr (8)
- run persistent reservations command on a device
- blkzone (8)
- run zone command on a device
- blockdev (8)
- call block device ioctls from the command line
- blogd (8)
- boot logging on /dev/console
- bridge (8)
- show / manipulate bridge addresses and devices
- cache_check (8)
- validates cache metadata on a device or file.
- cache_dump (8)
- dump cache metadata from device or file to standard ou...
- cache_metadata_size (8)
- Estimate the size of the metadata device needed for...
- cache_repair (8)
- repair cache binary metadata from device/file to devic...
- cache_restore (8)
- restore cache metadata file to device or file.
- cache_writeback (8)
- writeback dirty blocks to the origin device.
- cflow (1p)
- generate a C-language flowgraph (DEVELOPMENT)
- cpuid (4)
- x86 CPUID access device
- cryptsetup-bitlkOpen (8)
- open an encrypted device and create a mapping with...
- cryptsetup-convert (8)
- converts the device between LUKS1 and LUKS2 format
- cryptsetup-create (8)
- open an encrypted device and create a mapping with a ...
- cryptsetup-fvault2Open (8)
- open an encrypted device and create a mapping wi...
- cryptsetup-isLuks (8)
- check if a device is a LUKS device
- cryptsetup-loopaesOpen (8)
- open an encrypted device and create a mapping wi...
- cryptsetup-luksDump (8)
- dump the header information of a LUKS device
- cryptsetup-luksKillSlot (8)
- wipe a key-slot from the LUKS device
- cryptsetup-luksOpen (8)
- open an encrypted device and create a mapping with ...
- cryptsetup-luksResume (8)
- resume a suspended device and reinstate the key
- cryptsetup-luksSuspend (8)
- suspends an active device and wipes the key
- cryptsetup-luksUUID (8)
- print or set the UUID of a LUKS device
- cryptsetup-open (8)
- open an encrypted device and create a mapping with a s...
- cryptsetup-plainOpen (8)
- open an encrypted device and create a mapping with...
- cryptsetup-repair (8)
- repair the device metadata
- cryptsetup-tcryptOpen (8)
- open an encrypted device and create a mapping wit...
- crypttab (5)
- Configuration for encrypted block devices
- ctags (1p)
- create a tags file (DEVELOPMENT, FORTRAN)
- cups-deviced (8)
- cupsd helper programs
- DBD::File::Developers (3pm)
- Developers documentation for DBD::File
- DBI::DBD::SqlEngine::Developers (3pm)
- Developers documentation for DBI::DBD...
- delta (1p)
- make a delta (change) to an SCCS file (DEVELOPMENT)
- dev_t (3type)
- device ID
- devdump (8)
- Utility programs for dumping and verifying iso9660 ima...
- Devel::CheckLib (3pm)
- check that a library is available
- Devel::Symdump (3pm)
- dump symbol names or the symbol table
- devlink (8)
- Devlink tool
- devlink-dev (8)
- devlink device configuration
- devlink-dpipe (8)
- devlink dataplane pipeline visualization
- devlink-health (8)
- devlink health reporting and recovery
- devlink-lc (8)
- devlink line card configuration
- devlink-monitor (8)
- state monitoring
- devlink-port (8)
- devlink port configuration
- devlink-rate (8)
- devlink rate management
- devlink-region (8)
- devlink address region access
- devlink-resource (8)
- devlink device resource configuration
- devlink-sb (8)
- devlink shared buffer configuration
- devlink-trap (8)
- devlink trap configuration
- ditroff (7)
- classical device-independent roff
- dmeventd (8)
- Device-mapper event daemon
- dmfilemapd (8)
- device-mapper filemap monitoring daemon
- dmstats (8)
- device-mapper statistics management
- dracut-pre-trigger.service (8)
- runs the dracut hooks before udevd is triggered
- dracut-pre-udev.service (8)
- runs the dracut hooks before udevd is started
- dsp56k (4)
- DSP56001 interface device
- era_check (8)
- validate era metadata on device or file.
- era_dump (8)
- dump era metadata from device or file to standard output.
- era_restore (8)
- restore era metadata file to device or file.
- evdev (4)
- Generic Linux input driver
- fbdev (4)
- video driver for framebuffer device
- fbdevhw (4)
- os-specific submodule for framebuffer device access
- fd (4)
- floppy disk device
- fdatasync (2)
- synchronize a file's in-core state with storage device
- fsadm (8)
- utility to resize or check filesystem on a device
- fsync (1)
- synchronize the specified file with storage device
- fsync (2)
- synchronize a file's in-core state with storage device
- full (4)
- always full device
- fuse (4)
- Filesystem in Userspace (FUSE) device
- get (1p)
- get a version of an SCCS file (DEVELOPMENT)
- git-merge (1)
- Join two or more development histories together
- gitcore-tutorial (7)
- A Git core tutorial for developers
- glDepthRange (3gl)
- specify mapping of depth values from normalized device...
- Glib::devel (3pm)
- Binding developer's overview of Glib's internals
- gnu_dev_major (3)
- manage a device number
- gnu_dev_makedev (3)
- manage a device number
- gnu_dev_minor (3)
- manage a device number
- grantpt (3p)
- grant access to the slave pseudo-terminal device
- groff_font (5)
- format of groff device and font description files
- grotty (1)
- groff driver for typewriter-like devices
- grub2-bios-setup (8)
- set up a device to boot using GRUB
- grub2-install (8)
- install GRUB to a device
- grub2-ofpathname (8)
- find OpenBOOT path for a device
- grub2-probe (8)
- probe device information for GRUB
- grub2-sparc64-setup (8)
- set up a device to boot using GRUB
- gst-device-monitor-1.0 (1)
- Simple command line testing tool for GStreamer d...
- haveged (8)
- Generate random numbers and feed Linux's random device.
- hd (4)
- MFM/IDE hard disk devices
- hdparm (8)
- get/set SATA/IDE device parameters
- ifplugd (8)
- A link detection daemon for ethernet devices
- integritytab (5)
- Configuration for integrity block devices
- ioctl (2)
- control device
- ioctl (3p)
- control a STREAMS device (STREAMS)
- ip (8)
- show / manipulate routing, network devices, interfaces...
- ip-link (8)
- network device configuration
- ip-macsec (8)
- MACsec device configuration
- isatty (3p)
- test for a terminal device
- kpartx (8)
- Create device maps from partition tables.
- lavrec (1)
- Record MJPEG-video from a zoran/video4linux-device
- lex (1p)
- generate programs for lexical tasks (DEVELOPMENT)
- libblkid (3)
- block device identification library
- libpipewire-module-client-device (7)
- Client Device
- libudev (3)
- API for enumerating and introspecting local devices
- lirc (4)
- lirc devices
- lj4_font (5)
- groff fonts for use with devlj4
- lockdev (8)
- (unknown subject)
- loop (4)
- loop devices
- loop-control (4)
- loop devices
- losetup (8)
- set up and control loop devices
- lp (4)
- line printer devices
- lpinfo (8)
- show available devices or drivers
- lsblk (8)
- list block devices
- lsdev (8)
- display information about installed hardware
- lspci (8)
- list all PCI devices
- lsscsi (8)
- list SCSI devices (or hosts) and their attributes
- lsusb (8)
- list USB devices
- lvmdevices (8)
- Manage the devices file
- lvmdiskscan (8)
- List devices that may be used as physical volumes
- major (3)
- manage a device number
- makedev (3)
- manage a device number
- mbim-network (1)
- Simple network management of MBIM devices
- mbimcli (1)
- Control MBIM devices
- md (4)
- Multiple Device driver aka Linux Software RAID
- mdadm (8)
- manage MD devices aka Linux Software RAID
- minor (3)
- manage a device number
- mmap (2)
- map or unmap files or devices into memory
- mmap2 (2)
- map files or devices into memory
- mmap64 (3)
- map or unmap files or devices into memory
- modesetting (4)
- video driver for framebuffer device
- mouse-test (1)
- a tool for determining mouse type and device it's atta...
- msr (4)
- x86 CPU MSR access device
- multipath (8)
- Device mapper target autoconfig.
- munmap (2)
- map or unmap files or devices into memory
- netdevice (7)
- low-level access to Linux network devices
- nm (1p)
- write the name list of an object file (DEVELOPMENT)
- nroff (1)
- use groff to format documents for TTY devices
- ostree-admin-unlock (1)
- Prepare the current deployment for hotfix or develo...
- packet (7)
- packet interface on device level
- pam_securetty (8)
- Limit root login to special devices
- pciconfig_iobase (2)
- pci device information handling
- pciconfig_read (2)
- pci device information handling
- pciconfig_write (2)
- pci device information handling
- pcilib (7)
- a library for accessing PCI devices
- pipewire-devices (7)
- PipeWire device and node property reference.
- plipconfig (8)
- fine tune PLIP device parameters
- pods::SDL::CDROM (3pm)
- - SDL Bindings for the CDROM device
- pods::SDL::Joystick (3pm)
- - SDL Bindings for the Joystick device
- pods::SDL::Mouse (3pm)
- SDL Bindings for the Mouse device
- posix_openpt (3)
- open a pseudoterminal device
- posix_openpt (3p)
- open a pseudo-terminal device
- prs (1p)
- print an SCCS file (DEVELOPMENT)
- ptsname (3p)
- get name of the slave pseudo-terminal device
- pw-reserve (1)
- The PipeWire device reservation utility
- qmi-firmware-update (1)
- Update firmware in QMI devices
- qmi-network (1)
- Simple network management of QMI devices
- qmicli (1)
- Control QMI devices
- ram (4)
- ram disk device
- random (4)
- kernel random number source devices
- rdma-dev (8)
- RDMA device configuration
- removable_context (5)
- The SELinux removable devices context configuration file
- rescan-scsi-bus.sh (8)
- script to add and remove SCSI devices without rebooting
- rfkill (8)
- tool for enabling and disabling wireless devices
- rmdel (1p)
- remove a delta from an SCCS file (DEVELOPMENT)
- sact (1p)
- print current SCCS file-editing activity (DEVELOPMENT)
- sane-find-scanner (1)
- find SCSI and USB scanners and their device files
- sane-pie (5)
- SANE backend for PIE, Devcom and AdLib SCSI flatbed sc...
- sane-xerox_mfp (5)
- SANE backend for Xerox Phaser 3200MFP device et al.
- sasl_encodev (3)
- Cyrus SASL documentation
- sccs (1p)
- front end for the SCCS subsystem (DEVELOPMENT)
- scsi_mandat (8)
- check SCSI device support for mandatory commands
- scsi_ready (8)
- do SCSI TEST UNIT READY on devices
- scsi_satl (8)
- check SCSI to ATA Translation (SAT) device support
- scsi_temperature (8)
- fetch the temperature of a SCSI device
- sd-device (3)
- API for enumerating and introspecting local devices
- sd_device_get_devname (3)
- Returns various fields of device objects
- sd_device_get_devnum (3)
- Returns various fields of device objects
- sd_device_get_devpath (3)
- Returns various fields of device objects
- sd_device_get_devtype (3)
- Returns various fields of device objects
- sd_device_get_diskseq (3)
- Returns various fields of device objects
- sd_device_get_driver (3)
- Returns various fields of device objects
- sd_device_get_ifindex (3)
- Returns various fields of device objects
- sd_device_get_subsystem (3)
- Returns various fields of device objects
- sd_device_get_sysname (3)
- Returns various fields of device objects
- sd_device_get_sysnum (3)
- Returns various fields of device objects
- sd_device_get_syspath (3)
- Returns various fields of device objects
- sd_device_ref (3)
- Create or destroy references to a device object
- sd_device_unref (3)
- Create or destroy references to a device object
- sd_device_unrefp (3)
- Create or destroy references to a device object
- SDL_CloseAudio (3)
- Shuts down audio processing and closes the audio device.
- SDL_KeyboardEvent (3)
- Keyboard event structure
- SDL_OpenAudio (3)
- Opens the audio device with the desired parameters.
- setpci (8)
- configure PCI devices
- setup (2)
- setup devices and filesystems, mount root filesystem
- sg_dd (8)
- copy data to and from files and devices, especially SC...
- sg_map (8)
- displays mapping between Linux sg and other SCSI devices
- sg_map26 (8)
- map SCSI generic (sg) device to corresponding device n...
- sg_raw (8)
- send arbitrary SCSI or NVMe command to a device
- sg_reset (8)
- sends SCSI device, target, bus or host reset; or check...
- sg_sat_datetime (8)
- report or set date and time on a ATA device
- sg_sat_identify (8)
- send ATA IDENTIFY DEVICE command via SCSI to ATA Trans...
- sg_scan (8)
- scans sg devices (or SCSI/ATAPI/ATA devices) and print...
- sg_ses (8)
- access a SCSI Enclosure Services (SES) device
- sg_timestamp (8)
- report or set timestamp on SCSI device
- sg_verify (8)
- invoke SCSI VERIFY command(s) on a block device
- sg_xcopy (8)
- copy data to and from files and devices using SCSI EXT...
- sginfo (8)
- access mode page information for a SCSI (or ATAPI) device
- sgm_dd (8)
- copy data to and from files and devices, especially SC...
- sgp_dd (8)
- copy data to and from files and devices, especially SC...
- spa-monitor (1)
- The PipeWire SPA device debugging utility
- st (4)
- SCSI tape device
- swapoff (2)
- start/stop swapping to file/device
- swapoff (8)
- enable/disable devices and files for paging and swapping
- swapon (2)
- start/stop swapping to file/device
- swapon (8)
- enable/disable devices and files for paging and swapping
- systemd-cryptenroll (1)
- Enroll PKCS#11, FIDO2, TPM2 token/devices to LUKS2 ...
- systemd-initctl (8)
- /dev/initctl compatibility
- systemd-initctl.service (8)
- /dev/initctl compatibility
- systemd-initctl.socket (8)
- /dev/initctl compatibility
- systemd-journald-dev-log.socket (8)
- Journal service
- systemd-tmpfiles-setup-dev-early.service (8)
- Creates, deletes and cleans up...
- systemd-tmpfiles-setup-dev.service (8)
- Creates, deletes and cleans up volat...
- systemd-udev-settle.service (8)
- Wait for all pending udev events to be handled
- systemd-udevd (8)
- Device event managing daemon
- systemd-udevd-control.socket (8)
- Device event managing daemon
- systemd-udevd-kernel.socket (8)
- Device event managing daemon
- systemd-udevd.service (8)
- Device event managing daemon
- systemd.device (5)
- Device unit configuration
- systemd.link (5)
- Network device configuration
- systemd.net-naming-scheme (7)
- Network device naming schemes
- systemd.netdev (5)
- Virtual Network Device configuration
- thin_check (8)
- validates thin provisioning metadata on a device or file
- thin_dump (8)
- dump thin provisioning metadata from device or file to...
- thin_metadata_size (8)
- thin provisioning metadata device/file size calculator.
- thin_restore (8)
- restore thin provisioning metadata file to device or f...
- ttytype (5)
- terminal device to default terminal type mapping
- tunelp (8)
- set various parameters for the lp device
- udev (7)
- Dynamic device management
- udev.conf (5)
- Configuration for device event managing daemon
- udev_device_get_action (3)
- Query device properties
- udev_device_get_current_tags_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_devlinks_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_devnode (3)
- Query device properties
- udev_device_get_devnum (3)
- Query device properties
- udev_device_get_devpath (3)
- Query device properties
- udev_device_get_devtype (3)
- Query device properties
- udev_device_get_driver (3)
- Query device properties
- udev_device_get_is_initialized (3)
- Query device properties
- udev_device_get_parent (3)
- Query device properties
- udev_device_get_parent_with_subsystem... (3)
- Query device properties
- udev_device_get_properties_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_property_value (3)
- Retrieve or set device attributes
- udev_device_get_subsystem (3)
- Query device properties
- udev_device_get_sysattr_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_sysattr_value (3)
- Retrieve or set device attributes
- udev_device_get_sysname (3)
- Query device properties
- udev_device_get_sysnum (3)
- Query device properties
- udev_device_get_syspath (3)
- Query device properties
- udev_device_get_tags_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_udev (3)
- Query device properties
- udev_device_has_current_tag (3)
- Retrieve or set device attributes
- udev_device_has_tag (3)
- Retrieve or set device attributes
- udev_device_new_from_device_id (3)
- Create, acquire and release a udev devic...
- udev_device_new_from_devnum (3)
- Create, acquire and release a udev device o...
- udev_device_new_from_environment (3)
- Create, acquire and release a udev dev...
- udev_device_new_from_subsystem_sysname (3)
- Create, acquire and release a ud...
- udev_device_new_from_syspath (3)
- Create, acquire and release a udev device ...
- udev_device_ref (3)
- Create, acquire and release a udev device object
- udev_device_set_sysattr_value (3)
- Retrieve or set device attributes
- udev_device_unref (3)
- Create, acquire and release a udev device object
- udev_enumerate_add_match_is_initialized (3)
- Modify filters
- udev_enumerate_add_match_parent (3)
- Modify filters
- udev_enumerate_add_match_property (3)
- Modify filters
- udev_enumerate_add_match_subsystem (3)
- Modify filters
- udev_enumerate_add_match_sysattr (3)
- Modify filters
- udev_enumerate_add_match_sysname (3)
- Modify filters
- udev_enumerate_add_match_tag (3)
- Modify filters
- udev_enumerate_add_nomatch_subsystem (3)
- Modify filters
- udev_enumerate_add_nomatch_sysattr (3)
- Modify filters
- udev_enumerate_add_syspath (3)
- Query or modify a udev enumerate object
- udev_enumerate_get_list_entry (3)
- Query or modify a udev enumerate object
- udev_enumerate_get_udev (3)
- Query or modify a udev enumerate object
- udev_enumerate_new (3)
- Create, acquire and release a udev enumerate object
- udev_enumerate_ref (3)
- Create, acquire and release a udev enumerate object
- udev_enumerate_scan_devices (3)
- Query or modify a udev enumerate object
- udev_enumerate_scan_subsystems (3)
- Query or modify a udev enumerate object
- udev_enumerate_unref (3)
- Create, acquire and release a udev enumerate object
- udev_list_entry (3)
- Iterate and access udev lists
- udev_list_entry_get_by_name (3)
- Iterate and access udev lists
- udev_list_entry_get_name (3)
- Iterate and access udev lists
- udev_list_entry_get_next (3)
- Iterate and access udev lists
- udev_list_entry_get_value (3)
- Iterate and access udev lists
- udev_monitor_enable_receiving (3)
- Query and modify device monitor
- udev_monitor_filter_add_match_subsyst... (3)
- Modify filters
- udev_monitor_filter_add_match_tag (3)
- Modify filters
- udev_monitor_filter_remove (3)
- Modify filters
- udev_monitor_filter_update (3)
- Modify filters
- udev_monitor_get_fd (3)
- Query and modify device monitor
- udev_monitor_get_udev (3)
- Query and modify device monitor
- udev_monitor_new_from_netlink (3)
- Create, acquire and release a udev monito...
- udev_monitor_receive_device (3)
- Query and modify device monitor
- udev_monitor_ref (3)
- Create, acquire and release a udev monitor object
- udev_monitor_set_receive_buffer_size (3)
- Query and modify device monitor
- udev_monitor_unref (3)
- Create, acquire and release a udev monitor object
- udev_new (3)
- Create, acquire and release a udev context object
- udev_ref (3)
- Create, acquire and release a udev context object
- udev_unref (3)
- Create, acquire and release a udev context object
- udevadm (8)
- udev management tool
- unget (1p)
- undo a previous get of an SCCS file (DEVELOPMENT)
- urandom (4)
- kernel random number source devices
- usb-devices (1)
- print USB device details
- usb_modeswitch (1)
- control the mode of 'multi-state' USB devices
- usbhid-dump (8)
- dump USB HID device report descriptors and streams
- use-devel-checklib (1)
- (DEPRECATED)a script to package Devel::CheckLib with...
- val (1p)
- validate SCCS files (DEVELOPMENT)
- vdpa-dev (8)
- vdpa device configuration
- vdpa-mgmtdev (8)
- vdpa management device view
- veritytab (5)
- Configuration for verity block devices
- veth (4)
- Virtual Ethernet Device
- vfs_fileid (8)
- Generates file_id structs with unique device id values...
- vgimportdevices (8)
- Add devices for a VG to the devices file.
- vgmknodes (8)
- Create the special files for volume group devices in /dev
- vmmouse_detect (1)
- VMware mouse device autodetection tool
- wavelan (4)
- AT&T GIS WaveLAN ISA device driver
- what (1p)
- identify SCCS files (DEVELOPMENT)
- wipefs (8)
- wipe a signature from a device
- XAllowDeviceEvents (3)
- release queued events
- XChangeDeviceControl (3)
- query and change input device controls
- XChangeDeviceDontPropagateList (3)
- query or change the dont-propagate-list ...
- XChangeDeviceKeyMapping (3)
- query or change device key mappings
- XChangeDeviceProperty (3)
- Get, change or delete a device's property.
- XChangeFeedbackControl (3)
- query and change input device feedbacks
- XChangeKeyboardDevice (3)
- change which device is used as the X keyboard
- XChangePointerDevice (3)
- change which device is the X pointer
- XCheckTypedEvent (3)
- select events by type
- XCloseDevice (3)
- open or close an extension input device
- XDeleteDeviceProperty (3)
- Get, change or delete a device's property.
- XDeviceBell (3)
- ring a bell on a device supported through the input ex...
- XDeviceTimeCoord (3)
- get device motion history
- XFreeDeviceList (3)
- list available input devices
- XGetDeviceButtonMapping (3)
- query or change device button mappings
- XGetDeviceControl (3)
- query and change input device controls
- XGetDeviceDontPropagateList (3)
- query or change the dont-propagate-list for...
- XGetDeviceFocus (3)
- control extension input device focus
- XGetDeviceKeyMapping (3)
- query or change device key mappings
- XGetDeviceModifierMapping (3)
- query or change device modifier mappings
- XGetDeviceMotionEvents (3)
- get device motion history
- XGetDeviceProperty (3)
- Get, change or delete a device's property.
- XGetFeedbackControl (3)
- query and change input device feedbacks
- XGrabDevice (3)
- grab/release the specified extension device
- XGrabDeviceButton (3)
- grab/ungrab extension input device buttons
- XGrabDeviceKey (3)
- grab/ungrab extension input device Keys
- XIChangeHierarchy (3)
- change the device hierarchy.
- XIChangeProperty (3)
- change, retrieve or delete a device's property.
- XIDefineCursor (3)
- define device cursors.
- XIDeleteProperty (3)
- change, retrieve or delete a device's property.
- XIFreeDeviceInfo (3)
- get information about devices.
- XIGetClientPointer (3)
- set or get the ClientPointer device.
- XIGetFocus (3)
- set or get the device's focus.
- XIGetProperty (3)
- change, retrieve or delete a device's property.
- XIGetSelectedEvents (3)
- select for or get selected XI2 events on the window.
- XIGrabDevice (3)
- grab or ungrab the device.
- XIListProperties (3)
- List a device's properties.
- XIQueryDevice (3)
- get information about devices.
- XIQueryPointer (3)
- get device pointer coordinates.
- XISetClientPointer (3)
- set or get the ClientPointer device.
- XISetFocus (3)
- set or get the device's focus.
- XIUndefineCursor (3)
- define device cursors.
- XIUngrabDevice (3)
- grab or ungrab the device.
- XIWarpPointer (3)
- move a device's pointer.
- XkbAddDeviceLedInfo (3)
- Initialize an XkbDeviceLedInfoRec structure
- XkbAllocDeviceInfo (3)
- Obtain an XkbDeviceInfoRec structure
- XkbChangeDeviceInfo (3)
- Update the server's description of a device with th...
- XkbDeviceBell (3)
- Rings the bell on an X input extension device or the d...
- XkbDeviceBellEvent (3)
- Creates a bell event for an X input extension device...
- XkbForceDeviceBell (3)
- Rings the bell on any keyboard, overriding user pref...
- XkbFreeDeviceInfo (3)
- Free an XkbDeviceInfoRec structure
- XkbGetDeviceButtonActions (3)
- Query the button actions associated with an X...
- XkbGetDeviceInfo (3)
- Determine whether the X server allows Xkb access to pa...
- XkbGetDeviceInfoChanges (3)
- Query the changes that have occurred in the but...
- XkbGetDeviceLedInfo (3)
- Query the indicator names, maps, and state associat...
- XkbGetKeyboard (3)
- Retrieves one or more components of a keyboard device ...
- XkbGetNamedDeviceIndicator (3)
- Look up the indicator map and other informat...
- XkbNoteDeviceChanges (3)
- Note device changes reported in an XkbExtensionDev...
- XkbResizeDeviceButtonActions (3)
- Allocate additional space for button actio...
- XkbSetDeviceButtonActions (3)
- Change only the button actions for an input e...
- XkbSetDeviceInfo (3)
- Modify some or all of the characteristics of an X Inpu...
- XkbSetNamedDeviceIndicator (3)
- Names an indicator if it is not already name...
- XListDeviceProperties (3)
- List a device's properties.
- XListInputDevices (3)
- list available input devices
- XML::LibXML::Devel (3pm)
- makes functions from LibXML.xs available
- XOpenDevice (3)
- open or close an extension input device
- xorriso-dd-target (1)
- Device evaluator and disk image copier for GNU/Linux
- XQueryDeviceState (3)
- query the state of an extension input device.
- XSendEvent (3)
- send events and pointer motion history structure
- XSetDeviceButtonMapping (3)
- query or change device button mappings
- XSetDeviceFocus (3)
- control extension input device focus
- XSetDeviceMode (3)
- change the mode of a device
- XSetDeviceModifierMapping (3)
- query or change device modifier mappings
- XSetDeviceValuators (3)
- initialize the valuators on an extension input device
- XUngrabDevice (3)
- grab/release the specified extension device
- XUngrabDeviceButton (3)
- grab/ungrab extension input device buttons
- XUngrabDeviceKey (3)
- grab/ungrab extension input device Keys
- yacc (1p)
- yet another compiler compiler (DEVELOPMENT)
- zramctl (8)
- set up and control zram devices
home | help