OpenSuSE Man Pages
home |
help
- FD_ISSET (3)
- synchronous I/O multiplexing
- FD_SET (3)
- synchronous I/O multiplexing
- RESET (7pg16)
- restore the value of a run-time parameter to the defau...
- SET (7pg16)
- change a run-time parameter
- setconsole (8)
- determines the real tty of stdin
- TRUNCATE (7pg16)
- empty a table or set of tables
- yast (8)
- "Yet another Setup Tool", the installation and configu...
- __fsetlocking (3)
- interfaces to stdio FILE structure
- __ppc_set_ppr_low (3)
- Set the Program Priority Register
- __ppc_set_ppr_med (3)
- Set the Program Priority Register
- __ppc_set_ppr_med_high (3)
- Set the Program Priority Register
- __ppc_set_ppr_med_low (3)
- Set the Program Priority Register
- __ppc_set_ppr_very_low (3)
- Set the Program Priority Register
- __setfpucw (3)
- set FPU control word on i386 architecture (obsolete)
- _llseek (2)
- reposition read/write file offset
- aa-audit (8)
- set an AppArmor security profile to audit mode.
- aa-complain (8)
- set an AppArmor security profile to complain mode.
- aa-enforce (8)
- set an AppArmor security profile to enforce mode from ...
- acl_add_perm (3)
- add a permission to an ACL permission set
- acl_clear_perms (3)
- clear all permissions from an ACL permission set
- acl_delete_perm (3)
- delete a permission from an ACL permission set
- acl_get_perm (3)
- test for a permission in an ACL permission set
- acl_get_permset (3)
- retrieve the permission set from an ACL entry
- acl_set_fd (3)
- set an ACL by file descriptor
- acl_set_file (3)
- set an ACL by filename
- acl_set_permset (3)
- set the permission set in an ACL entry
- acl_set_qualifier (3)
- set the qualifier of an ACL entry
- acl_set_tag_type (3)
- set the tag type of an ACL entry
- addr2line (1)
- convert addresses or symbol+offset into file names and...
- adjtime_config (5)
- information about hardware clock setting and drift factor
- alarm (2)
- set an alarm clock for delivery of a signal
- arch_prctl (2)
- set architecture-specific thread state
- archive_read_set_options (3)
- functions controlling options for reading arch...
- archive_write_set_options (3)
- functions controlling options for writing arc...
- archive_write_set_passphrase (3)
- functions for writing encrypted archives
- armscii-8 (7)
- Armenian character set encoded in octal, decimal, and ...
- ascii (7)
- ASCII character set encoded in octal, decimal, and hex...
- attr_set (3)
- set the value of a user attribute of a filesystem object
- attr_set (3ncurses)
- curses character and window attribute control routines
- attr_setf (3)
- set the value of a user attribute of a filesystem object
- attrset (3ncurses)
- curses character and window attribute control routines
- audit (8)
- set an AppArmor security profile to audit mode.
- audit.rules (7)
- a set of rules loaded in the kernel audit system
- audit_set_backlog_limit (3)
- Set the audit backlog limit
- audit_set_backlog_wait_time (3)
- Set the audit backlog wait time
- audit_set_enabled (3)
- Enable or disable auditing
- audit_set_failure (3)
- Set audit failure flag
- audit_set_pid (3)
- Set audit daemon process ID
- audit_set_rate_limit (3)
- Set audit rate limit
- audit_setloginuid (3)
- Set a program's loginuid value
- auparse_reset (3)
- reset audit parser instance
- auparse_set_eoe_timeout (3)
- set the end of event timeout value
- auparse_set_escape_mode (3)
- choose escape method
- ausearch_set_stop (3)
- set the cursor position
- auto_reset (n)
- standard library of Tcl procedures
- avc_cleanup (3)
- userspace SELinux AVC setup and teardown
- avc_destroy (3)
- userspace SELinux AVC setup and teardown
- avc_init (3)
- legacy userspace SELinux AVC setup
- avc_open (3)
- userspace SELinux AVC setup and teardown
- avc_reset (3)
- userspace SELinux AVC setup and teardown
- ber_start_set (3)
- OpenLDAP LBER simplified Basic Encoding Rules library ...
- ber_put_set (3)
- OpenLDAP LBER simplified Basic Encoding Rules library ...
- bind_textdomain_codeset (3)
- set encoding of message translations
- bindtextdomain (3)
- set directory containing message catalogs
- Bit::Vector (3pm)
- Efficient bit vector, set of integers and "big int" ma...
- bkgdset (3ncurses)
- curses window background manipulation routines
- bkgrndset (3ncurses)
- curses window complex background manipulation routines
- border_set (3ncurses)
- create curses borders or lines using complex characte...
- box_set (3ncurses)
- create curses borders or lines using complex character...
- bwrap (1)
- container setup utility
- cap_set_proc (3)
- capability manipulation on processes
- cap_iab_set_proc (3)
- (unknown subject)
- cap_iab_set_vector (3)
- (unknown subject)
- cap_launcher_set_chroot (3)
- (unknown subject)
- cap_launcher_set_iab (3)
- (unknown subject)
- cap_launcher_set_mode (3)
- (unknown subject)
- cap_launcher_setgroups (3)
- (unknown subject)
- cap_launcher_setuid (3)
- (unknown subject)
- cap_set_fd (3)
- capability manipulation on files
- cap_set_file (3)
- capability manipulation on files
- cap_set_flag (3)
- capability data object manipulation
- cap_set_mode (3)
- capability manipulation on processes
- cap_set_secbits (3)
- capability manipulation on processes
- cap_setgroups (3)
- capability manipulation on processes
- cap_setuid (3)
- capability manipulation on processes
- capget (2)
- set/get capabilities of thread(s)
- capset (2)
- set/get capabilities of thread(s)
- capsetp (3)
- capability manipulation on processes
- cfgetispeed (3)
- get and set terminal attributes, line control, get and...
- cfgetospeed (3)
- get and set terminal attributes, line control, get and...
- cfmakeraw (3)
- get and set terminal attributes, line control, get and...
- cfsetispeed (3)
- get and set terminal attributes, line control, get and...
- cfsetispeed (3p)
- set input baud rate
- cfsetospeed (3)
- get and set terminal attributes, line control, get and...
- cfsetospeed (3p)
- set output baud rate
- cfsetspeed (3)
- get and set terminal attributes, line control, get and...
- charmap (5)
- character set description file
- charsets (7)
- character set standards and internationalization
- chkstat (8)
- Tool to check and set file permissions
- clearerr (3)
- check and reset stream status
- clock_settime (2)
- clock and time functions
- clock_settime (3p)
- clock and timer functions
- color_set (3ncurses)
- curses character and window attribute control routines
- complain (8)
- set an AppArmor security profile to complain mode.
- context_range_set (3)
- Routines to manipulate SELinux security contexts
- context_role_set (3)
- Routines to manipulate SELinux security contexts
- context_type_set (3)
- Routines to manipulate SELinux security contexts
- context_user_set (3)
- Routines to manipulate SELinux security contexts
- cp1251 (7)
- CP 1251 character set encoded in octal, decimal, and h...
- cp1252 (7)
- CP 1252 character set encoded in octal, decimal, and h...
- CPU_ALLOC (3)
- macros for manipulating CPU sets
- CPU_ALLOC_SIZE (3)
- macros for manipulating CPU sets
- CPU_AND (3)
- macros for manipulating CPU sets
- CPU_AND_S (3)
- macros for manipulating CPU sets
- CPU_CLR (3)
- macros for manipulating CPU sets
- CPU_CLR_S (3)
- macros for manipulating CPU sets
- CPU_COUNT (3)
- macros for manipulating CPU sets
- CPU_COUNT_S (3)
- macros for manipulating CPU sets
- CPU_EQUAL (3)
- macros for manipulating CPU sets
- CPU_EQUAL_S (3)
- macros for manipulating CPU sets
- CPU_FREE (3)
- macros for manipulating CPU sets
- CPU_ISSET (3)
- macros for manipulating CPU sets
- CPU_ISSET_S (3)
- macros for manipulating CPU sets
- CPU_OR (3)
- macros for manipulating CPU sets
- CPU_OR_S (3)
- macros for manipulating CPU sets
- CPU_SET (3)
- macros for manipulating CPU sets
- CPU_SET_S (3)
- macros for manipulating CPU sets
- CPU_XOR (3)
- macros for manipulating CPU sets
- CPU_XOR_S (3)
- macros for manipulating CPU sets
- CPU_ZERO (3)
- macros for manipulating CPU sets
- CPU_ZERO_S (3)
- macros for manipulating CPU sets
- cpupower (1)
- Shows and sets processor power related values
- cpupower-frequency-set (1)
- A small tool which allows to modify cpufreq sett...
- cpupower-idle-set (1)
- Utility to set cpu idle state specific kernel options
- cpupower-set (1)
- Set processor power related kernel or hardware configu...
- cpuset (7)
- confine processes to processor and memory node subsets
- crypt_checksalt (3)
- validate a crypt setting string
- crypt_gensalt (3)
- encode settings for passphrase hashing
- crypt_gensalt_ra (3)
- encode settings for passphrase hashing
- crypt_gensalt_rn (3)
- encode settings for passphrase hashing
- cryptmount-setup (8)
- setup a new encrypted filesystem
- cryptsetup (8)
- manage plain dm-crypt, LUKS, and other encrypted volumes
- cryptsetup-benchmark (8)
- benchmarks ciphers and KDF
- cryptsetup-bitlkDump (8)
- dump the header information of a BITLK (BitLocker ...
- cryptsetup-bitlkOpen (8)
- open an encrypted device and create a mapping with...
- cryptsetup-close (8)
- removes the existing mapping <name> (and the associate...
- cryptsetup-config (8)
- set permanent configuration options (store to LUKS he...
- cryptsetup-convert (8)
- converts the device between LUKS1 and LUKS2 format
- cryptsetup-create (8)
- open an encrypted device and create a mapping with a ...
- cryptsetup-erase (8)
- erase all keyslots
- cryptsetup-fvault2Dump (8)
- dump the header information of a FVAULT2 (FileVa...
- cryptsetup-fvault2Open (8)
- open an encrypted device and create a mapping wi...
- cryptsetup-isLuks (8)
- check if a device is a LUKS device
- cryptsetup-loopaesOpen (8)
- open an encrypted device and create a mapping wi...
- cryptsetup-luksAddKey (8)
- add a new passphrase
- cryptsetup-luksChangeKey (8)
- change an existing passphrase
- cryptsetup-luksConvertKey (8)
- converts an existing LUKS2 keyslot to new PBK...
- cryptsetup-luksDump (8)
- dump the header information of a LUKS device
- cryptsetup-luksErase (8)
- erase all keyslots
- cryptsetup-luksFormat (8)
- initialize a LUKS partition and set the initial p...
- cryptsetup-luksHeaderBackup (8)
- store a binary backup of the LUKS header an...
- cryptsetup-luksHeaderRestore (8)
- restore a binary backup of the LUKS header...
- cryptsetup-luksKillSlot (8)
- wipe a key-slot from the LUKS device
- cryptsetup-luksOpen (8)
- open an encrypted device and create a mapping with ...
- cryptsetup-luksRemoveKey (8)
- remove the supplied passphrase from the LUKS d...
- cryptsetup-luksResume (8)
- resume a suspended device and reinstate the key
- cryptsetup-luksSuspend (8)
- suspends an active device and wipes the key
- cryptsetup-luksUUID (8)
- print or set the UUID of a LUKS device
- cryptsetup-open (8)
- open an encrypted device and create a mapping with a s...
- cryptsetup-plainOpen (8)
- open an encrypted device and create a mapping with...
- cryptsetup-reencrypt (8)
- reencrypt LUKS encrypted volumes in-place
- cryptsetup-refresh (8)
- refresh parameters of an active mapping
- cryptsetup-repair (8)
- repair the device metadata
- cryptsetup-resize (8)
- resize an active mapping
- cryptsetup-status (8)
- report the status for a mapping
- cryptsetup-tcryptDump (8)
- dump the header information of a TCRYPT (TrueCryp...
- cryptsetup-tcryptOpen (8)
- open an encrypted device and create a mapping wit...
- cryptsetup-token (8)
- manage LUKS2 tokens
- ctrlaltdel (8)
- set the function of the Ctrl-Alt-Del combination
- current_field (3form)
- set and get form page number
- current_item (3menu)
- set and get current_menu_item
- curs_set (3ncurses)
- low-level curses routines
- curs_set_sp (3ncurses)
- curses screen-pointer extension
- dane_state_set_dlv_file (3)
- API function
- date (1)
- print or set the system date and time
- DBI::Util::CacheMemory (3pm)
- a very fast but very minimal subset of Cache::...
- dcb (8)
- show / manipulate DCB (Data Center Bridging) settings
- dcb-buffer (8)
- show / manipulate port buffer settings of the DCB (Dat...
- dcb-maxrate (8)
- show / manipulate port maxrate settings of the DCB (Da...
- dconf-editor (1)
- Graphical editor for gsettings and dconf
- des_setparity (3)
- fast DES encryption
- dircolors (1)
- color setup for ls
- dmsetup (8)
- low level logical volume management
- dnssec-revoke (1)
- set the REVOKED bit on a DNSSEC key
- dnssec-settime (1)
- set the key timing metadata for a DNSSEC key
- domainname (1)
- show or set the system's NIS/YP domain name
- dosfslabel (8)
- set or get MS-DOS filesystem label
- DPMSSetTimeouts (3)
- permits applications to set the timeout values used by...
- dump_xsettings (1)
- prints X11 application settings from an XSETTINGS prov...
- el_reset (3)
- line editor, history and tokenization functions
- el_set (3)
- line editor, history and tokenization functions
- el_tok_reset (3)
- line editor, history and tokenization functions
- enforce (8)
- set an AppArmor security profile to enforce mode from ...
- env (1p)
- set the environment for command invocation
- ethtool (8)
- query or control network driver and hardware settings
- eview (1)
- easy Vim, edit a file with Vim and setup for modeless ...
- evim (1)
- easy Vim, edit a file with Vim and setup for modeless ...
- export (1p)
- set the export attribute for variables
- fatlabel (8)
- set or get MS-DOS filesystem label
- fconfigure (n)
- Set and get options on a channel
- fdupes (1)
- finds duplicate files in a given set of directories
- fegetenv (3p)
- get and set current floating-point environment
- fegetexceptflag (3p)
- get and set floating-point status flags
- fegetround (3p)
- get and set current rounding direction
- feof (3)
- check and reset stream status
- ferror (3)
- check and reset stream status
- fesetenv (3)
- floating-point rounding and exception handling
- fesetenv (3p)
- set current floating-point environment
- fesetexceptflag (3)
- floating-point rounding and exception handling
- fesetexceptflag (3p)
- set floating-point status flags
- fesetround (3)
- floating-point rounding and exception handling
- fesetround (3p)
- set current rounding direction
- ffs (3)
- find first bit set in a word
- ffs (3p)
- find first set bit
- ffsl (3)
- find first bit set in a word
- ffsll (3)
- find first bit set in a word
- field_index (3form)
- set and get form page number
- field_init (3form)
- set hooks for automatic invocation by applications
- field_opts (3form)
- set and get field options
- field_opts_off (3form)
- set and get field options
- field_opts_on (3form)
- set and get field options
- field_term (3form)
- set hooks for automatic invocation by applications
- firewalld.ipset (5)
- firewalld ipset configuration files
- flatpak-permission-reset (1)
- Reset permissions
- flatpak-permission-set (1)
- Set permissions
- form_hook (3form)
- set hooks for automatic invocation by applications
- form_init (3form)
- set hooks for automatic invocation by applications
- form_opts (3form)
- set and get form options
- form_opts_off (3form)
- set and get form options
- form_opts_on (3form)
- set and get form options
- form_page (3form)
- set and get form page number
- form_term (3form)
- set hooks for automatic invocation by applications
- format (3menu)
- set and get menu sizes
- fribidi_charset_to_unicode (3)
- convert string to Unicode
- fribidi_parse_charset (3)
- parse character set name
- fribidi_set_debug (3)
- set debug state
- fribidi_set_mirroring (3)
- set mirroring on or off
- fribidi_set_reorder_nsm (3)
- set marks reordering on or off
- fribidi_unicode_to_charset (3)
- convert string from Unicode
- fsetfilecon (3)
- set SELinux security context of a file
- fsetfilecon_raw (3)
- set SELinux security context of a file
- fsetpos (3)
- reposition a stream
- fsetpos (3p)
- set current file position
- fsetxattr (2)
- set an extended attribute value
- ftell (3p)
- return a file offset in a stream
- fts_set (3)
- traverse a file hierarchy
- futimens (3p)
- set file access and modification times
- fwide (3)
- set and determine the orientation of a FILE stream
- fwide (3p)
- set stream orientation
- geocpset (1)
- adds control points based on geometric position
- get_robust_list (2)
- get/set list of robust futexes
- getcontext (3)
- get or set the user context
- getdomainname (2)
- get/set NIS domain name
- getexeccon (3)
- get or set the SELinux security context used for execu...
- getexeccon_raw (3)
- get or set the SELinux security context used for execu...
- getfscreatecon (3)
- get or set the SELinux security context used for creat...
- getfscreatecon_raw (3)
- get or set the SELinux security context used for cre...
- getgroups (2)
- get/set list of supplementary group IDs
- getgroups32 (2)
- get/set list of supplementary group IDs
- gethostid (3)
- get or set the unique identifier of the current host
- gethostname (2)
- get/set hostname
- getitimer (2)
- get or set value of an interval timer
- getitimer (3p)
- get and set value of interval timer
- getkeycreatecon (3)
- get or set the SELinux security context used for creat...
- getkeycreatecon_raw (3)
- get or set the SELinux security context used for cr...
- getpgid (2)
- set/get process group
- getpgrp (2)
- set/get process group
- getpriority (2)
- get/set program scheduling priority
- getpriority (3p)
- get and set the nice value
- getrlimit (2)
- get/set resource limits
- getsockcreatecon (3)
- get or set the SELinux security context used for creat...
- getsockcreatecon_raw (3)
- get or set the SELinux security context used for c...
- getsockopt (2)
- get and set options on sockets
- gettimeofday (2)
- get / set time
- git-config (1)
- Get and set repository or global options
- git-quiltimport (1)
- Applies a quilt patchset onto the current branch
- git-remote (1)
- Manage set of tracked repositories
- git-reset (1)
- Reset current HEAD to the specified state
- git-sh-i18n (1)
- Git's i18n setup code for shell scripts
- git-sh-setup (1)
- Common Git shell script setup code
- git-sparse-checkout (1)
- Reduce your working tree to a subset of tracked files
- giteveryday (7)
- A useful minimum set of commands for Everyday Git
- glBlendColor (3gl)
- set the blend color
- glBlendEquation (3gl)
- set the blend equation
- glClear (3gl)
- clear buffers to preset values
- glColor (3gl)
- set the current color
- glColor3b (3gl)
- set the current color
- glColor3bv (3gl)
- set the current color
- glColor3d (3gl)
- set the current color
- glColor3dv (3gl)
- set the current color
- glColor3f (3gl)
- set the current color
- glColor3fv (3gl)
- set the current color
- glColor3i (3gl)
- set the current color
- glColor3iv (3gl)
- set the current color
- glColor3s (3gl)
- set the current color
- glColor3sv (3gl)
- set the current color
- glColor3ub (3gl)
- set the current color
- glColor3ubv (3gl)
- set the current color
- glColor3ui (3gl)
- set the current color
- glColor3uiv (3gl)
- set the current color
- glColor3us (3gl)
- set the current color
- glColor3usv (3gl)
- set the current color
- glColor4b (3gl)
- set the current color
- glColor4bv (3gl)
- set the current color
- glColor4d (3gl)
- set the current color
- glColor4dv (3gl)
- set the current color
- glColor4f (3gl)
- set the current color
- glColor4fv (3gl)
- set the current color
- glColor4i (3gl)
- set the current color
- glColor4iv (3gl)
- set the current color
- glColor4s (3gl)
- set the current color
- glColor4sv (3gl)
- set the current color
- glColor4ub (3gl)
- set the current color
- glColor4ubv (3gl)
- set the current color
- glColor4ui (3gl)
- set the current color
- glColor4uiv (3gl)
- set the current color
- glColor4us (3gl)
- set the current color
- glColor4usv (3gl)
- set the current color
- glColorTableParameter (3gl)
- set color lookup table parameters
- glColorTableParameterfv (3gl)
- set color lookup table parameters
- glColorTableParameteriv (3gl)
- set color lookup table parameters
- glConvolutionParameter (3gl)
- set convolution parameters
- glGenLists (3gl)
- generate a contiguous set of empty display lists
- glib-compile-schemas (1)
- GSettings schema compiler
- glIndex (3gl)
- set the current color index
- glIndexd (3gl)
- set the current color index
- glIndexdv (3gl)
- set the current color index
- glIndexf (3gl)
- set the current color index
- glIndexfv (3gl)
- set the current color index
- glIndexi (3gl)
- set the current color index
- glIndexiv (3gl)
- set the current color index
- glIndexs (3gl)
- set the current color index
- glIndexsv (3gl)
- set the current color index
- glIndexub (3gl)
- set the current color index
- glIndexubv (3gl)
- set the current color index
- glLight (3gl)
- set light source parameters
- glLightf (3gl)
- set light source parameters
- glLightfv (3gl)
- set light source parameters
- glLighti (3gl)
- set light source parameters
- glLightiv (3gl)
- set light source parameters
- glLightModel (3gl)
- set the lighting model parameters
- glLightModelf (3gl)
- set the lighting model parameters
- glLightModelfv (3gl)
- set the lighting model parameters
- glLightModeli (3gl)
- set the lighting model parameters
- glLightModeliv (3gl)
- set the lighting model parameters
- glListBase (3gl)
- set the display-list base for glCallLists
- glMultiTexCoord1dARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1dvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1fARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1fvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1iARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1ivARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1sARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1svARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2dARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2dvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2fARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2fvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2iARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2ivARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2sARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2svARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3dARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3dvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3fARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3fvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3iARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3ivARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3sARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3svARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4dARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4dvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4fARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4fvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4iARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4ivARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4sARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4svARB (3gl)
- set the current texture coordinates
- glMultiTexCoordARB (3gl)
- set the current texture coordinates
- glNormal (3gl)
- set the current normal vector
- glNormal3b (3gl)
- set the current normal vector
- glNormal3bv (3gl)
- set the current normal vector
- glNormal3d (3gl)
- set the current normal vector
- glNormal3dv (3gl)
- set the current normal vector
- glNormal3f (3gl)
- set the current normal vector
- glNormal3fv (3gl)
- set the current normal vector
- glNormal3i (3gl)
- set the current normal vector
- glNormal3iv (3gl)
- set the current normal vector
- glNormal3s (3gl)
- set the current normal vector
- glNormal3sv (3gl)
- set the current normal vector
- glPixelMap (3gl)
- set up pixel transfer maps
- glPixelMapfv (3gl)
- set up pixel transfer maps
- glPixelMapuiv (3gl)
- set up pixel transfer maps
- glPixelMapusv (3gl)
- set up pixel transfer maps
- glPixelStore (3gl)
- set pixel storage modes
- glPixelStoref (3gl)
- set pixel storage modes
- glPixelStorei (3gl)
- set pixel storage modes
- glPixelTransfer (3gl)
- set pixel transfer modes
- glPixelTransferf (3gl)
- set pixel transfer modes
- glPixelTransferi (3gl)
- set pixel transfer modes
- glPolygonOffset (3gl)
- set the scale and units used to calculate depth values
- glPolygonStipple (3gl)
- set the polygon stippling pattern
- glPrioritizeTextures (3gl)
- set texture residence priority
- glRenderMode (3gl)
- set rasterization mode
- glResetHistogram (3gl)
- reset histogram table entries to zero
- glResetMinmax (3gl)
- reset minmax table entries to initial values
- glStencilFunc (3gl)
- set function and reference value for stencil testing
- glStencilOp (3gl)
- set stencil test actions
- glTexCoord (3gl)
- set the current texture coordinates
- glTexCoord1d (3gl)
- set the current texture coordinates
- glTexCoord1dv (3gl)
- set the current texture coordinates
- glTexCoord1f (3gl)
- set the current texture coordinates
- glTexCoord1fv (3gl)
- set the current texture coordinates
- glTexCoord1i (3gl)
- set the current texture coordinates
- glTexCoord1iv (3gl)
- set the current texture coordinates
- glTexCoord1s (3gl)
- set the current texture coordinates
- glTexCoord1sv (3gl)
- set the current texture coordinates
- glTexCoord2d (3gl)
- set the current texture coordinates
- glTexCoord2dv (3gl)
- set the current texture coordinates
- glTexCoord2f (3gl)
- set the current texture coordinates
- glTexCoord2fv (3gl)
- set the current texture coordinates
- glTexCoord2i (3gl)
- set the current texture coordinates
- glTexCoord2iv (3gl)
- set the current texture coordinates
- glTexCoord2s (3gl)
- set the current texture coordinates
- glTexCoord2sv (3gl)
- set the current texture coordinates
- glTexCoord3d (3gl)
- set the current texture coordinates
- glTexCoord3dv (3gl)
- set the current texture coordinates
- glTexCoord3f (3gl)
- set the current texture coordinates
- glTexCoord3fv (3gl)
- set the current texture coordinates
- glTexCoord3i (3gl)
- set the current texture coordinates
- glTexCoord3iv (3gl)
- set the current texture coordinates
- glTexCoord3s (3gl)
- set the current texture coordinates
- glTexCoord3sv (3gl)
- set the current texture coordinates
- glTexCoord4d (3gl)
- set the current texture coordinates
- glTexCoord4dv (3gl)
- set the current texture coordinates
- glTexCoord4f (3gl)
- set the current texture coordinates
- glTexCoord4fv (3gl)
- set the current texture coordinates
- glTexCoord4i (3gl)
- set the current texture coordinates
- glTexCoord4iv (3gl)
- set the current texture coordinates
- glTexCoord4s (3gl)
- set the current texture coordinates
- glTexCoord4sv (3gl)
- set the current texture coordinates
- glTexEnv (3gl)
- set texture environment parameters
- glTexEnvf (3gl)
- set texture environment parameters
- glTexEnvfv (3gl)
- set texture environment parameters
- glTexEnvi (3gl)
- set texture environment parameters
- glTexEnviv (3gl)
- set texture environment parameters
- glTexParameter (3gl)
- set texture parameters
- glTexParameterf (3gl)
- set texture parameters
- glTexParameterfv (3gl)
- set texture parameters
- glTexParameteri (3gl)
- set texture parameters
- glTexParameteriv (3gl)
- set texture parameters
- glViewport (3gl)
- set the viewport
- gnome-control-center (1)
- Configure GNOME settings
- gnutls_aead_cipher_set_key (3)
- API function
- gnutls_alert_set_read_function (3)
- API function
- gnutls_alpn_set_protocols (3)
- API function
- gnutls_anon_set_params_function (3)
- API function
- gnutls_anon_set_server_dh_params (3)
- API function
- gnutls_anon_set_server_known_dh_params (3)
- API function
- gnutls_anon_set_server_params_function (3)
- API function
- gnutls_anti_replay_set_add_function (3)
- API function
- gnutls_anti_replay_set_ptr (3)
- API function
- gnutls_anti_replay_set_window (3)
- API function
- gnutls_certificate_server_set_request (3)
- API function
- gnutls_certificate_set_dh_params (3)
- API function
- gnutls_certificate_set_flags (3)
- API function
- gnutls_certificate_set_key (3)
- API function
- gnutls_certificate_set_known_dh_params (3)
- API function
- gnutls_certificate_set_ocsp_status_re... (3)
- API function
- gnutls_certificate_set_ocsp_status_re... (3)
- API function
- gnutls_certificate_set_ocsp_status_re... (3)
- API function
- gnutls_certificate_set_ocsp_status_re... (3)
- API function
- gnutls_certificate_set_ocsp_status_re... (3)
- API function
- gnutls_certificate_set_params_function (3)
- API function
- gnutls_certificate_set_pin_function (3)
- API function
- gnutls_certificate_set_rawpk_key_file (3)
- API function
- gnutls_certificate_set_rawpk_key_mem (3)
- API function
- gnutls_certificate_set_retrieve_function (3)
- API function
- gnutls_certificate_set_retrieve_funct... (3)
- API function
- gnutls_certificate_set_retrieve_funct... (3)
- API function
- gnutls_certificate_set_trust_list (3)
- API function
- gnutls_certificate_set_verify_flags (3)
- API function
- gnutls_certificate_set_verify_function (3)
- API function
- gnutls_certificate_set_verify_limits (3)
- API function
- gnutls_certificate_set_x509_crl (3)
- API function
- gnutls_certificate_set_x509_crl_file (3)
- API function
- gnutls_certificate_set_x509_crl_mem (3)
- API function
- gnutls_certificate_set_x509_key (3)
- API function
- gnutls_certificate_set_x509_key_file (3)
- API function
- gnutls_certificate_set_x509_key_file2 (3)
- API function
- gnutls_certificate_set_x509_key_mem (3)
- API function
- gnutls_certificate_set_x509_key_mem2 (3)
- API function
- gnutls_certificate_set_x509_simple_pk... (3)
- API function
- gnutls_certificate_set_x509_simple_pk... (3)
- API function
- gnutls_certificate_set_x509_system_trust (3)
- API function
- gnutls_certificate_set_x509_trust (3)
- API function
- gnutls_certificate_set_x509_trust_dir (3)
- API function
- gnutls_certificate_set_x509_trust_file (3)
- API function
- gnutls_certificate_set_x509_trust_mem (3)
- API function
- gnutls_cipher_set_iv (3)
- API function
- gnutls_compress_certificate_set_methods (3)
- API function
- gnutls_credentials_set (3)
- API function
- gnutls_db_set_cache_expiration (3)
- API function
- gnutls_db_set_ptr (3)
- API function
- gnutls_db_set_remove_function (3)
- API function
- gnutls_db_set_retrieve_function (3)
- API function
- gnutls_db_set_store_function (3)
- API function
- gnutls_dh_set_prime_bits (3)
- API function
- gnutls_digest_set_secure (3)
- API function
- gnutls_dtls_prestate_set (3)
- API function
- gnutls_dtls_set_data_mtu (3)
- API function
- gnutls_dtls_set_mtu (3)
- API function
- gnutls_dtls_set_timeouts (3)
- API function
- gnutls_ecc_curve_set_enabled (3)
- API function
- gnutls_ext_set_data (3)
- API function
- gnutls_fips140_set_mode (3)
- API function
- gnutls_global_set_audit_log_function (3)
- API function
- gnutls_global_set_log_function (3)
- API function
- gnutls_global_set_log_level (3)
- API function
- gnutls_global_set_mem_functions (3)
- API function
- gnutls_global_set_mutex (3)
- API function
- gnutls_global_set_time_function (3)
- API function
- gnutls_gost_paramset_get_name (3)
- API function
- gnutls_gost_paramset_get_oid (3)
- API function
- gnutls_handshake_set_hook_function (3)
- API function
- gnutls_handshake_set_max_packet_length (3)
- API function
- gnutls_handshake_set_post_client_hell... (3)
- API function
- gnutls_handshake_set_private_extensions (3)
- API function
- gnutls_handshake_set_random (3)
- API function
- gnutls_handshake_set_read_function (3)
- API function
- gnutls_handshake_set_secret_function (3)
- API function
- gnutls_handshake_set_timeout (3)
- API function
- gnutls_heartbeat_set_timeouts (3)
- API function
- gnutls_hmac_set_nonce (3)
- API function
- gnutls_memset (3)
- API function
- gnutls_ocsp_req_set_extension (3)
- API function
- gnutls_ocsp_req_set_nonce (3)
- API function
- gnutls_oid_to_gost_paramset (3)
- API function
- gnutls_pkcs11_obj_set_info (3)
- API function
- gnutls_pkcs11_obj_set_pin_function (3)
- API function
- gnutls_pkcs11_privkey_set_pin_function (3)
- API function
- gnutls_pkcs11_set_pin_function (3)
- API function
- gnutls_pkcs11_set_token_function (3)
- API function
- gnutls_pkcs11_token_set_pin (3)
- API function
- gnutls_pkcs12_bag_set_crl (3)
- API function
- gnutls_pkcs12_bag_set_crt (3)
- API function
- gnutls_pkcs12_bag_set_data (3)
- API function
- gnutls_pkcs12_bag_set_friendly_name (3)
- API function
- gnutls_pkcs12_bag_set_key_id (3)
- API function
- gnutls_pkcs12_bag_set_privkey (3)
- API function
- gnutls_pkcs12_set_bag (3)
- API function
- gnutls_pkcs7_set_crl (3)
- API function
- gnutls_pkcs7_set_crl_raw (3)
- API function
- gnutls_pkcs7_set_crt (3)
- API function
- gnutls_pkcs7_set_crt_raw (3)
- API function
- gnutls_priority_set (3)
- API function
- gnutls_priority_set_direct (3)
- API function
- gnutls_privkey_set_flags (3)
- API function
- gnutls_privkey_set_pin_function (3)
- API function
- gnutls_privkey_set_spki (3)
- API function
- gnutls_protocol_set_enabled (3)
- API function
- gnutls_psk_set_client_credentials (3)
- API function
- gnutls_psk_set_client_credentials2 (3)
- API function
- gnutls_psk_set_client_credentials_fun... (3)
- API function
- gnutls_psk_set_client_credentials_fun... (3)
- API function
- gnutls_psk_set_client_credentials_fun... (3)
- API function
- gnutls_psk_set_params_function (3)
- API function
- gnutls_psk_set_server_credentials_file (3)
- API function
- gnutls_psk_set_server_credentials_fun... (3)
- API function
- gnutls_psk_set_server_credentials_fun... (3)
- API function
- gnutls_psk_set_server_credentials_fun... (3)
- API function
- gnutls_psk_set_server_credentials_hint (3)
- API function
- gnutls_psk_set_server_dh_params (3)
- API function
- gnutls_psk_set_server_known_dh_params (3)
- API function
- gnutls_psk_set_server_params_function (3)
- API function
- gnutls_pubkey_set_key_usage (3)
- API function
- gnutls_pubkey_set_pin_function (3)
- API function
- gnutls_pubkey_set_spki (3)
- API function
- gnutls_record_set_max_early_data_size (3)
- API function
- gnutls_record_set_max_recv_size (3)
- API function
- gnutls_record_set_max_size (3)
- API function
- gnutls_record_set_state (3)
- API function
- gnutls_record_set_timeout (3)
- API function
- gnutls_server_name_set (3)
- API function
- gnutls_session_set_data (3)
- API function
- gnutls_session_set_id (3)
- API function
- gnutls_session_set_keylog_function (3)
- API function
- gnutls_session_set_premaster (3)
- API function
- gnutls_session_set_ptr (3)
- API function
- gnutls_session_set_verify_cert (3)
- API function
- gnutls_session_set_verify_cert2 (3)
- API function
- gnutls_session_set_verify_function (3)
- API function
- gnutls_session_set_verify_output_func... (3)
- API function
- gnutls_set_default_priority (3)
- API function
- gnutls_set_default_priority_append (3)
- API function
- gnutls_sign_set_secure (3)
- API function
- gnutls_sign_set_secure_for_certs (3)
- API function
- gnutls_srp_set_client_credentials (3)
- API function
- gnutls_srp_set_client_credentials_fun... (3)
- API function
- gnutls_srp_set_prime_bits (3)
- API function
- gnutls_srp_set_server_credentials_file (3)
- API function
- gnutls_srp_set_server_credentials_fun... (3)
- API function
- gnutls_srp_set_server_fake_salt_seed (3)
- API function
- gnutls_srtp_set_mki (3)
- API function
- gnutls_srtp_set_profile (3)
- API function
- gnutls_srtp_set_profile_direct (3)
- API function
- gnutls_subject_alt_names_set (3)
- API function
- gnutls_tdb_set_store_commitment_func (3)
- API function
- gnutls_tdb_set_store_func (3)
- API function
- gnutls_tdb_set_verify_func (3)
- API function
- gnutls_transport_set_errno (3)
- API function
- gnutls_transport_set_errno_function (3)
- API function
- gnutls_transport_set_fastopen (3)
- API function
- gnutls_transport_set_int (3)
- API function
- gnutls_transport_set_int2 (3)
- API function
- gnutls_transport_set_ptr (3)
- API function
- gnutls_transport_set_ptr2 (3)
- API function
- gnutls_transport_set_pull_function (3)
- API function
- gnutls_transport_set_pull_timeout_fun... (3)
- API function
- gnutls_transport_set_push_function (3)
- API function
- gnutls_transport_set_vec_push_function (3)
- API function
- gnutls_x509_aia_set (3)
- API function
- gnutls_x509_aki_set_cert_issuer (3)
- API function
- gnutls_x509_aki_set_id (3)
- API function
- gnutls_x509_crl_dist_points_set (3)
- API function
- gnutls_x509_crl_set_authority_key_id (3)
- API function
- gnutls_x509_crl_set_crt (3)
- API function
- gnutls_x509_crl_set_crt_serial (3)
- API function
- gnutls_x509_crl_set_next_update (3)
- API function
- gnutls_x509_crl_set_number (3)
- API function
- gnutls_x509_crl_set_this_update (3)
- API function
- gnutls_x509_crl_set_version (3)
- API function
- gnutls_x509_crq_set_attribute_by_oid (3)
- API function
- gnutls_x509_crq_set_basic_constraints (3)
- API function
- gnutls_x509_crq_set_challenge_password (3)
- API function
- gnutls_x509_crq_set_dn (3)
- API function
- gnutls_x509_crq_set_dn_by_oid (3)
- API function
- gnutls_x509_crq_set_extension_by_oid (3)
- API function
- gnutls_x509_crq_set_key (3)
- API function
- gnutls_x509_crq_set_key_purpose_oid (3)
- API function
- gnutls_x509_crq_set_key_rsa_raw (3)
- API function
- gnutls_x509_crq_set_key_usage (3)
- API function
- gnutls_x509_crq_set_private_key_usage... (3)
- API function
- gnutls_x509_crq_set_pubkey (3)
- API function
- gnutls_x509_crq_set_spki (3)
- API function
- gnutls_x509_crq_set_subject_alt_name (3)
- API function
- gnutls_x509_crq_set_subject_alt_other... (3)
- API function
- gnutls_x509_crq_set_tlsfeatures (3)
- API function
- gnutls_x509_crq_set_version (3)
- API function
- gnutls_x509_crt_set_activation_time (3)
- API function
- gnutls_x509_crt_set_authority_info_ac... (3)
- API function
- gnutls_x509_crt_set_authority_key_id (3)
- API function
- gnutls_x509_crt_set_basic_constraints (3)
- API function
- gnutls_x509_crt_set_ca_status (3)
- API function
- gnutls_x509_crt_set_crl_dist_points (3)
- API function
- gnutls_x509_crt_set_crl_dist_points2 (3)
- API function
- gnutls_x509_crt_set_crq (3)
- API function
- gnutls_x509_crt_set_crq_extension_by_oid (3)
- API function
- gnutls_x509_crt_set_crq_extensions (3)
- API function
- gnutls_x509_crt_set_dn (3)
- API function
- gnutls_x509_crt_set_dn_by_oid (3)
- API function
- gnutls_x509_crt_set_expiration_time (3)
- API function
- gnutls_x509_crt_set_extension_by_oid (3)
- API function
- gnutls_x509_crt_set_flags (3)
- API function
- gnutls_x509_crt_set_inhibit_anypolicy (3)
- API function
- gnutls_x509_crt_set_issuer_alt_name (3)
- API function
- gnutls_x509_crt_set_issuer_alt_othername (3)
- API function
- gnutls_x509_crt_set_issuer_dn (3)
- API function
- gnutls_x509_crt_set_issuer_dn_by_oid (3)
- API function
- gnutls_x509_crt_set_issuer_unique_id (3)
- API function
- gnutls_x509_crt_set_key (3)
- API function
- gnutls_x509_crt_set_key_purpose_oid (3)
- API function
- gnutls_x509_crt_set_key_usage (3)
- API function
- gnutls_x509_crt_set_name_constraints (3)
- API function
- gnutls_x509_crt_set_pin_function (3)
- API function
- gnutls_x509_crt_set_policy (3)
- API function
- gnutls_x509_crt_set_private_key_usage... (3)
- API function
- gnutls_x509_crt_set_proxy (3)
- API function
- gnutls_x509_crt_set_proxy_dn (3)
- API function
- gnutls_x509_crt_set_pubkey (3)
- API function
- gnutls_x509_crt_set_serial (3)
- API function
- gnutls_x509_crt_set_spki (3)
- API function
- gnutls_x509_crt_set_subject_alt_name (3)
- API function
- gnutls_x509_crt_set_subject_alt_other... (3)
- API function
- gnutls_x509_crt_set_subject_alternati... (3)
- API function
- gnutls_x509_crt_set_subject_key_id (3)
- API function
- gnutls_x509_crt_set_subject_unique_id (3)
- API function
- gnutls_x509_crt_set_tlsfeatures (3)
- API function
- gnutls_x509_crt_set_version (3)
- API function
- gnutls_x509_dn_set_str (3)
- API function
- gnutls_x509_key_purpose_set (3)
- API function
- gnutls_x509_policies_set (3)
- API function
- gnutls_x509_privkey_set_flags (3)
- API function
- gnutls_x509_privkey_set_pin_function (3)
- API function
- gnutls_x509_privkey_set_spki (3)
- API function
- gnutls_x509_spki_set_rsa_pss_params (3)
- API function
- gnutls_x509_trust_list_set_getissuer_... (3)
- API function
- gnutls_x509_trust_list_set_ptr (3)
- API function
- gperf (1)
- generate a perfect hash function from a key set
- gpg-preset-passphrase (1)
- Put a passphrase into gpg-agent's cache
- graphviz (7)
- rich set of graph drawing tools
- groff_tmac (5)
- macro files in the roff typesetting system
- grub2-bios-setup (8)
- set up a device to boot using GRUB
- grub2-reboot (8)
- set the default boot entry for GRUB, for the next boot...
- grub2-set-default (8)
- set the saved default boot entry for GRUB
- grub2-sparc64-setup (8)
- set up a device to boot using GRUB
- gsettings (1)
- GSettings configuration tool
- gtk-query-settings (1)
- Utility to print name and value of all GtkSettings p...
- gtk4-query-settings (1)
- Print name and value of GTK settings
- hdparm (8)
- get/set SATA/IDE device parameters
- hline_set (3ncurses)
- create curses borders or lines using complex character...
- hook (3form)
- set hooks for automatic invocation by applications
- hook (3menu)
- set hooks for automatic invocation by applications
- hostname (1)
- show or set the system's host name
- HTML::Tagset (3pm)
- data tables useful in parsing HTML
- iconv (1p)
- codeset conversion
- iconv (3)
- perform character set conversion
- iconv (3p)
- codeset conversion function
- iconv.h (0p)
- codeset conversion facility
- iconv_close (3)
- deallocate descriptor for character set conversion
- iconv_close (3p)
- codeset conversion deallocation function
- iconv_open (3)
- allocate descriptor for character set conversion
- iconv_open (3p)
- codeset conversion allocation function
- iecset (1)
- Set or dump IEC958 status bits
- ifnames (1)
- Extract CPP conditionals from a set of files
- Image::ExifTool::Charset (3pm)
- ExifTool character encoding routines
- Image::ExifTool::NikonCustom (3pm)
- Read and Write Nikon custom settings
- Image::ExifTool::NikonSettings (3pm)
- Read Nikon user settings
- install (1)
- copy files and set attributes
- integritysetup (8)
- manage dm-integrity (block level integrity) volumes
- IO::HTML (3pm)
- Open an HTML file with automatic charset detection
- io_setup (2)
- create an asynchronous I/O context
- ioctl_fslabel (2)
- get or set a filesystem label
- ioctl_xfs_fssetxattr (2)
- query information for an open file
- ioctl_xfs_getresblks (2)
- query and set XFS free space reservation information
- ioctl_xfs_setresblks (2)
- query and set XFS free space reservation information
- ionice (1)
- set or get process I/O scheduling class and priority
- ioperm (2)
- set port input/output permissions
- ioprio_get (2)
- get/set I/O scheduling class and priority
- ioprio_set (2)
- get/set I/O scheduling class and priority
- ipcrm (1p)
- remove an XSI message queue, semaphore set, or shared ...
- ipset (8)
- administration tool for IP sets
- ipset-translate (8)
- translation tool to migrate from ipset to nftables
- isaset (8)
- set ISA registers
- iso-8859-1 (7)
- ISO 8859-1 character set encoded in octal, decimal, an...
- iso-8859-10 (7)
- ISO 8859-10 character set encoded in octal, decimal, a...
- iso-8859-11 (7)
- ISO 8859-11 character set encoded in octal, decimal, a...
- iso-8859-13 (7)
- ISO 8859-13 character set encoded in octal, decimal, a...
- iso-8859-14 (7)
- ISO 8859-14 character set encoded in octal, decimal, a...
- iso-8859-15 (7)
- ISO 8859-15 character set encoded in octal, decimal, a...
- iso-8859-16 (7)
- ISO 8859-16 character set encoded in octal, decimal, a...
- iso-8859-2 (7)
- ISO 8859-2 character set encoded in octal, decimal, an...
- iso-8859-3 (7)
- ISO 8859-3 character set encoded in octal, decimal, an...
- iso-8859-4 (7)
- ISO 8859-4 character set encoded in octal, decimal, an...
- iso-8859-5 (7)
- ISO 8859-5 character set encoded in octal, decimal, an...
- iso-8859-6 (7)
- ISO 8859-6 character set encoded in octal, decimal, an...
- iso-8859-7 (7)
- ISO 8859-7 character set encoded in octal, decimal, an...
- iso-8859-8 (7)
- ISO 8859-8 character set encoded in octal, decimal, an...
- iso-8859-9 (7)
- ISO 8859-9 character set encoded in octal, decimal, an...
- iso_8859-1 (7)
- ISO 8859-1 character set encoded in octal, decimal, an...
- iso_8859-10 (7)
- ISO 8859-10 character set encoded in octal, decimal, a...
- iso_8859-11 (7)
- ISO 8859-11 character set encoded in octal, decimal, a...
- iso_8859-13 (7)
- ISO 8859-13 character set encoded in octal, decimal, a...
- iso_8859-14 (7)
- ISO 8859-14 character set encoded in octal, decimal, a...
- iso_8859-15 (7)
- ISO 8859-15 character set encoded in octal, decimal, a...
- iso_8859-16 (7)
- ISO 8859-16 character set encoded in octal, decimal, a...
- iso_8859-2 (7)
- ISO 8859-2 character set encoded in octal, decimal, an...
- iso_8859-3 (7)
- ISO 8859-3 character set encoded in octal, decimal, an...
- iso_8859-4 (7)
- ISO 8859-4 character set encoded in octal, decimal, an...
- iso_8859-5 (7)
- ISO 8859-5 character set encoded in octal, decimal, an...
- iso_8859-6 (7)
- ISO 8859-6 character set encoded in octal, decimal, an...
- iso_8859-7 (7)
- ISO 8859-7 character set encoded in octal, decimal, an...
- iso_8859-8 (7)
- ISO 8859-8 character set encoded in octal, decimal, an...
- iso_8859-9 (7)
- ISO 8859-9 character set encoded in octal, decimal, an...
- iso_8859_1 (7)
- ISO 8859-1 character set encoded in octal, decimal, an...
- iso_8859_10 (7)
- ISO 8859-10 character set encoded in octal, decimal, a...
- iso_8859_11 (7)
- ISO 8859-11 character set encoded in octal, decimal, a...
- iso_8859_13 (7)
- ISO 8859-13 character set encoded in octal, decimal, a...
- iso_8859_14 (7)
- ISO 8859-14 character set encoded in octal, decimal, a...
- iso_8859_15 (7)
- ISO 8859-15 character set encoded in octal, decimal, a...
- iso_8859_16 (7)
- ISO 8859-16 character set encoded in octal, decimal, a...
- iso_8859_2 (7)
- ISO 8859-2 character set encoded in octal, decimal, an...
- iso_8859_3 (7)
- ISO 8859-3 character set encoded in octal, decimal, an...
- iso_8859_4 (7)
- ISO 8859-4 character set encoded in octal, decimal, an...
- iso_8859_5 (7)
- ISO 8859-5 character set encoded in octal, decimal, an...
- iso_8859_6 (7)
- ISO 8859-6 character set encoded in octal, decimal, an...
- iso_8859_7 (7)
- ISO 8859-7 character set encoded in octal, decimal, an...
- iso_8859_8 (7)
- ISO 8859-8 character set encoded in octal, decimal, an...
- iso_8859_9 (7)
- ISO 8859-9 character set encoded in octal, decimal, an...
- item_index (3menu)
- set and get current_menu_item
- item_init (3menu)
- set hooks for automatic invocation by applications
- item_opts (3menu)
- set and get menu item options
- item_opts_off (3menu)
- set and get menu item options
- item_opts_on (3menu)
- set and get menu item options
- item_term (3menu)
- set hooks for automatic invocation by applications
- item_value (3menu)
- set and get menu item values
- iwevent (8)
- Display Wireless Events generated by drivers and setti...
- kbd_mode (1)
- report or set the keyboard mode
- kbdrate (8)
- reset the keyboard repeat rate and delay time
- key_secretkey_is_set (3)
- interfaces to rpc keyserver daemon
- key_setsecret (3)
- interfaces to rpc keyserver daemon
- keyctl_session_to_parent (3)
- set the parent process's session keyring
- keyctl_set_reqkey_keyring (3)
- set the implicit destination keyring
- keyctl_set_timeout (3)
- set the expiration timer on a key
- keyctl_setperm (3)
- change the permissions mask on a key
- syslog (2)
- read and/or clear kernel message ring buffer; set cons...
- klogctl (3)
- read and/or clear kernel message ring buffer; set cons...
- kmousetool (1)
- Accessibility tool to help click the mouse
- koi8-r (7)
- Russian character set encoded in octal, decimal, and h...
- koi8-u (7)
- Ukrainian character set encoded in octal, decimal, and...
- landlock_add_rule (2)
- add a new Landlock rule to a ruleset
- landlock_create_ruleset (2)
- create a new Landlock ruleset
- landlock_restrict_self (2)
- enforce a Landlock ruleset
- latin1 (7)
- ISO 8859-1 character set encoded in octal, decimal, an...
- latin10 (7)
- ISO 8859-16 character set encoded in octal, decimal, a...
- latin2 (7)
- ISO 8859-2 character set encoded in octal, decimal, an...
- latin3 (7)
- ISO 8859-3 character set encoded in octal, decimal, an...
- latin4 (7)
- ISO 8859-4 character set encoded in octal, decimal, an...
- latin5 (7)
- ISO 8859-9 character set encoded in octal, decimal, an...
- latin6 (7)
- ISO 8859-10 character set encoded in octal, decimal, a...
- latin7 (7)
- ISO 8859-13 character set encoded in octal, decimal, a...
- latin8 (7)
- ISO 8859-14 character set encoded in octal, decimal, a...
- latin9 (7)
- ISO 8859-15 character set encoded in octal, decimal, a...
- ldap_set_option (3)
- LDAP option handling routines
- ldap_set_rebind_proc (3)
- LDAP bind routines
- ldap_set_urllist_proc (3)
- Initialize the LDAP library and open a connection...
- libipset (3)
- A library for using ipset
- llseek (2)
- reposition read/write file offset
- locale.conf (5)
- Configuration file for locale settings
- localectl (1)
- Control the system locale and keyboard layout settings
- losetup (8)
- set up and control loop devices
- lpoptions (1)
- display or set printer options and defaults
- lseek (2)
- reposition read/write file offset
- lseek (3p)
- move the read/write file offset
- lseek64 (3)
- reposition 64-bit read/write file offset
- lset (n)
- Change an element in a list
- lsetfilecon (3)
- set SELinux security context of a file
- lsetfilecon_raw (3)
- set SELinux security context of a file
- lsetxattr (2)
- set an extended attribute value
- malloc_set_state (3)
- record and restore state of malloc implementation
- mallopt (3)
- set memory allocation parameters
- mariadb-conv (1)
- character set conversion utility for MariaDB
- mariadb-setpermission (1)
- interactively set permissions in grant tables (my...
- mark (3menu)
- get and set the menu mark string
- mbind (2)
- set memory policy for a memory range
- membarrier (2)
- issue memory barriers on a set of threads
- memset (3)
- fill memory with a constant byte
- memset (3p)
- set bytes in memory
- menu_current (3menu)
- set and get current_menu_item
- menu_format (3menu)
- set and get menu sizes
- menu_hook (3menu)
- set hooks for automatic invocation by applications
- menu_init (3menu)
- set hooks for automatic invocation by applications
- menu_mark (3menu)
- get and set the menu mark string
- menu_opts (3menu)
- set and get menu item options
- menu_opts_off (3menu)
- set and get menu options
- menu_opts_on (3menu)
- set and get menu options
- menu_pattern (3menu)
- set and get a menu's pattern buffer
- menu_spacing (3menu)
- set and get spacing between menu items.
- menu_term (3menu)
- set hooks for automatic invocation by applications
- menu_value (3menu)
- set and get menu item values
- migrate_pages (2)
- move all pages in a process to another set of nodes
- mitem_current (3menu)
- set and get current_menu_item
- mkswap (8)
- set up a Linux swap area
- Mock::Config (3pm)
- temporarily set Config or XSConfig values
- modesetting (4)
- video driver for framebuffer device
- modify_ldt (2)
- get or set a per-process LDT entry
- mount_setattr (2)
- change properties of a mount or mount tree
- mprotect (2)
- set protection on a region of memory
- mprotect (3p)
- set protection of memory mapping
- mq_getattr (3)
- get/set message queue attributes
- mq_getsetattr (2)
- get/set message queue attributes
- mq_setattr (3)
- get/set message queue attributes
- mq_setattr (3p)
- set message queue attributes (REALTIME)
- msgconv (1)
- character set conversion for message catalog
- mvhline_set (3ncurses)
- create curses borders or lines using complex charact...
- mvvline_set (3ncurses)
- create curses borders or lines using complex charact...
- mvwhline_set (3ncurses)
- create curses borders or lines using complex charac...
- mvwvline_set (3ncurses)
- create curses borders or lines using complex charac...
- mysql_setpermission (1)
- interactively set permissions in grant tables (mysq...
- newgidmap (1)
- set the gid mapping of a user namespace
- newuidmap (1)
- set the uid mapping of a user namespace
- nfsconf (8)
- Query various NFS configuration settings
- nisdomainname (1)
- show or set the system's NIS/YP domain name
- nm-settings (5)
- Description of settings and properties of NetworkManag...
- nm-settings-dbus (5)
- Description of settings and properties of NetworkManag...
- nm-settings-keyfile (5)
- Description of keyfile settings plugin
- nm-settings-nmcli (5)
- Description of settings and properties of NetworkMana...
- nm-system-settings.conf (5)
- NetworkManager configuration file
- nvidia-settings (1)
- configure the NVIDIA graphics driver
- offsetof (3)
- offset of a structure member
- opendmarc-params (8)
- OpenDMARC reporting parameters setup tool
- openssl-gendsa (13ssl)
- generate a DSA private key from a set of parameters
- opiepasswd (1)
- Change or set a user's password for the OPIE authentic...
- optionMemberList (3)
- Get the list of members of a bit mask set
- opts (3form)
- set and get form options
- opts (3menu)
- set and get menu options
- org.freedesktop.LogControl1 (5)
- D-Bus interface to query and set logging co...
- ostree-admin-set-default (1)
- Make deployment at a given index the default f...
- ostree-admin-set-origin (1)
- Change the "origin" (location for upgrades)
- ostree-config (1)
- Change configuration settings
- ostree-reset (1)
- Reset a ref to a previous commit
- ostree-state-overlay@.service (8)
- Set up state overlays
- page (3form)
- set and get form page number
- pam_env (8)
- PAM module to set/unset environment variables
- pam_misc_setenv (3)
- BSD like PAM environment variable setting
- pam_putenv (3)
- set or change PAM environment variable
- pam_selinux (8)
- PAM module to set the default security context
- pam_set_data (3)
- set module internal data
- pam_set_item (3)
- set and update PAM informations
- pam_setcred (3)
- establish / delete user credentials
- pam_sm_setcred (3)
- PAM service function to alter credentials
- pam_umask (8)
- PAM module to set the file mode creation mask
- pattern (3menu)
- set and get a menu's pattern buffer
- pcre2_set_bsr (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_callout (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_character_tables (3)
- Perl-compatible regular expressions (revised...
- pcre2_set_compile_extra_options (3)
- Perl-compatible regular expressions (re...
- pcre2_set_compile_recursion_guard (3)
- Perl-compatible regular expressions (...
- pcre2_set_depth_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_glob_escape (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_glob_separator (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_heap_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_match_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_max_pattern_length (3)
- Perl-compatible regular expressions (revis...
- pcre2_set_newline (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_offset_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_parens_nest_limit (3)
- Perl-compatible regular expressions (revise...
- pcre2_set_recursion_limit (3)
- Perl-compatible regular expressions (revised ...
- pcre2_set_recursion_memory_management (3)
- Perl-compatible regular expressio...
- pcre2_set_substitute_callout (3)
- Perl-compatible regular expressions (revis...
- perf_event_open (2)
- set up performance monitoring
- permissions (5)
- default permission settings
- personality (2)
- set the process execution domain
- pipesz (1)
- set or examine pipe and FIFO buffer sizes
- pkey_mprotect (2)
- set protection on a region of memory
- plymouth-set-default-theme (1)
- Set the plymouth theme
- pmap_set (3)
- library routines for remote procedure calls
- pmap_unset (3)
- library routines for remote procedure calls
- pnmquant (1)
- quantize the colors in a Netpbm image to a smaller set
- posix_mem_offset (3p)
- find offset and length of a mapped typed memory block...
- posix_spawnattr_getflags (3p)
- get and set the spawn-flags attribute of a sp...
- posix_spawnattr_getpgroup (3p)
- get and set the spawn-pgroup attribute of a ...
- posix_spawnattr_getschedparam (3p)
- get and set the spawn-schedparam attribu...
- posix_spawnattr_getschedpolicy (3p)
- get and set the spawn-schedpolicy attri...
- posix_spawnattr_getsigdefault (3p)
- get and set the spawn-sigdefault attribu...
- posix_spawnattr_getsigmask (3p)
- get and set the spawn-sigmask attribute of ...
- posix_spawnattr_setflags (3p)
- set the spawn-flags attribute of a spawn attr...
- posix_spawnattr_setpgroup (3p)
- set the spawn-pgroup attribute of a spawn at...
- posix_spawnattr_setschedparam (3p)
- set the spawn-schedparam attribute of a ...
- posix_spawnattr_setschedpolicy (3p)
- set the spawn-schedpolicy attribute of ...
- posix_spawnattr_setsigdefault (3p)
- set the spawn-sigdefault attribute of a ...
- posix_spawnattr_setsigmask (3p)
- set the spawn-sigmask attribute of a spawn ...
- posix_trace_attr_getclockres (3p)
- retrieve and set information about a trac...
- posix_trace_attr_getinherited (3p)
- retrieve and set the behavior of a trace...
- posix_trace_attr_getlogsize (3p)
- retrieve and set trace stream size attribu...
- posix_trace_attr_getname (3p)
- retrieve and set information about a trace st...
- posix_trace_attr_getstreamfullpolicy (3p)
- retrieve and set the behavior of ...
- posix_trace_attr_getstreamsize (3p)
- retrieve and set trace stream size attr...
- posix_trace_attr_setinherited (3p)
- retrieve and set the behavior of a trace...
- posix_trace_attr_setlogsize (3p)
- retrieve and set trace stream size attribu...
- posix_trace_attr_setname (3p)
- retrieve and set information about a trace st...
- posix_trace_attr_setstreamfullpolicy (3p)
- retrieve and set the behavior of ...
- posix_trace_attr_setstreamsize (3p)
- retrieve and set trace stream size attr...
- posix_trace_eventset_add (3p)
- manipulate trace event type sets (TRACING)
- posix_trace_get_filter (3p)
- retrieve and set the filter of an initialized t...
- posix_trace_set_filter (3p)
- set filter of an initialized trace stream (TRAC...
- pptpsetup (8)
- Point-to-Point Tunneling Protocol setup
- pread (2)
- read from or write to a file descriptor at a given offset
- pread64 (2)
- read from or write to a file descriptor at a given offset
- prlimit (1)
- get and set process resource limits
- prlimit (2)
- get/set resource limits
- vlimit (3)
- get/set resource limits
- prlimit64 (2)
- get/set resource limits
- psx_set_sensitivity (3)
- POSIX semantics for system calls
- pthread_attr_getaffinity_np (3)
- set/get CPU affinity attribute in thread at...
- pthread_attr_getdetachstate (3)
- set/get detach state attribute in thread at...
- pthread_attr_getdetachstate (3p)
- get and set the detachstate attribute
- pthread_attr_getguardsize (3)
- set/get guard size attribute in thread attrib...
- pthread_attr_getguardsize (3p)
- get and set the thread guardsize attribute
- pthread_attr_getinheritsched (3)
- set/get inherit-scheduler attribute in thr...
- pthread_attr_getinheritsched (3p)
- get and set the inheritsched attribute (R...
- pthread_attr_getschedparam (3)
- set/get scheduling parameter attributes in t...
- pthread_attr_getschedparam (3p)
- get and set the schedparam attribute
- pthread_attr_getschedpolicy (3)
- set/get scheduling policy attribute in thre...
- pthread_attr_getschedpolicy (3p)
- get and set the schedpolicy attribute (REA...
- pthread_attr_getscope (3)
- set/get contention scope attribute in thread attr...
- pthread_attr_getscope (3p)
- get and set the contentionscope attribute (REALT...
- pthread_attr_getsigmask_np (3)
- set/get signal mask attribute in thread attr...
- pthread_attr_getstack (3)
- set/get stack attributes in thread attributes object
- pthread_attr_getstack (3p)
- get and set stack attributes
- pthread_attr_getstackaddr (3)
- set/get stack address attribute in thread att...
- pthread_attr_getstacksize (3)
- set/get stack size attribute in thread attrib...
- pthread_attr_getstacksize (3p)
- get and set the stacksize attribute
- pthread_attr_setaffinity_np (3)
- set/get CPU affinity attribute in thread at...
- pthread_attr_setdetachstate (3)
- set/get detach state attribute in thread at...
- pthread_attr_setdetachstate (3p)
- set the detachstate attribute
- pthread_attr_setguardsize (3)
- set/get guard size attribute in thread attrib...
- pthread_attr_setguardsize (3p)
- set the thread guardsize attribute
- pthread_attr_setinheritsched (3)
- set/get inherit-scheduler attribute in thr...
- pthread_attr_setinheritsched (3p)
- set the inheritsched attribute (REALTIME ...
- pthread_attr_setschedparam (3)
- set/get scheduling parameter attributes in t...
- pthread_attr_setschedparam (3p)
- set the schedparam attribute
- pthread_attr_setschedpolicy (3)
- set/get scheduling policy attribute in thre...
- pthread_attr_setschedpolicy (3p)
- set the schedpolicy attribute (REALTIME TH...
- pthread_attr_setscope (3)
- set/get contention scope attribute in thread attr...
- pthread_attr_setscope (3p)
- set the contentionscope attribute (REALTIME THRE...
- pthread_attr_setsigmask_np (3)
- set/get signal mask attribute in thread attr...
- pthread_attr_setstack (3)
- set/get stack attributes in thread attributes object
- pthread_attr_setstack (3p)
- set the stack attribute
- pthread_attr_setstackaddr (3)
- set/get stack address attribute in thread att...
- pthread_attr_setstacksize (3)
- set/get stack size attribute in thread attrib...
- pthread_attr_setstacksize (3p)
- set the stacksize attribute
- pthread_barrierattr_getpshared (3p)
- get and set the process-shared attribut...
- pthread_barrierattr_setpshared (3p)
- set the process-shared attribute of the...
- pthread_condattr_getclock (3p)
- get and set the clock selection condition va...
- pthread_condattr_getpshared (3p)
- get and set the process-shared condition v...
- pthread_condattr_setclock (3p)
- set the clock selection condition variable a...
- pthread_condattr_setpshared (3p)
- set the process-shared condition variable ...
- pthread_getaffinity_np (3)
- set/get CPU affinity of a thread
- pthread_getattr_default_np (3)
- get or set default thread-creation attributes
- pthread_getconcurrency (3)
- set/get the concurrency level
- pthread_getconcurrency (3p)
- get and set the level of concurrency
- pthread_getname_np (3)
- set/get the name of a thread
- pthread_getschedparam (3)
- set/get scheduling policy and parameters of a thread
- pthread_mutex_getprioceiling (3p)
- get and set the priority ceiling of a mut...
- pthread_mutex_setprioceiling (3p)
- change the priority ceiling of a mutex (R...
- pthread_mutexattr_getprioceiling (3p)
- get and set the prioceiling attribute...
- pthread_mutexattr_getprotocol (3p)
- get and set the protocol attribute of th...
- pthread_mutexattr_getpshared (3)
- get/set process-shared mutex attribute
- pthread_mutexattr_getpshared (3p)
- get and set the process-shared attribute
- pthread_mutexattr_getrobust (3)
- get and set the robustness attribute of a m...
- pthread_mutexattr_getrobust (3p)
- get and set the mutex robust attribute
- pthread_mutexattr_getrobust_np (3)
- get and set the robustness attribute of ...
- pthread_mutexattr_gettype (3p)
- get and set the mutex type attribute
- pthread_mutexattr_setprioceiling (3p)
- set the prioceiling attribute of the ...
- pthread_mutexattr_setprotocol (3p)
- set the protocol attribute of the mutex ...
- pthread_mutexattr_setpshared (3)
- get/set process-shared mutex attribute
- pthread_mutexattr_setpshared (3p)
- set the process-shared attribute
- pthread_mutexattr_setrobust (3)
- get and set the robustness attribute of a m...
- pthread_mutexattr_setrobust (3p)
- get and set the mutex robust attribute
- pthread_mutexattr_setrobust_np (3)
- get and set the robustness attribute of ...
- pthread_mutexattr_settype (3p)
- set the mutex type attribute
- pthread_rwlockattr_getkind_np (3)
- set/get the read-write lock kind of the t...
- pthread_rwlockattr_getpshared (3p)
- get and set the process-shared attribute...
- pthread_rwlockattr_setkind_np (3)
- set/get the read-write lock kind of the t...
- pthread_rwlockattr_setpshared (3p)
- set the process-shared attribute of the ...
- pthread_setaffinity_np (3)
- set/get CPU affinity of a thread
- pthread_setattr_default_np (3)
- get or set default thread-creation attributes
- pthread_setcancelstate (3)
- set cancelability state and type
- pthread_setcancelstate (3p)
- set cancelability state
- pthread_setcanceltype (3)
- set cancelability state and type
- pthread_setconcurrency (3)
- set/get the concurrency level
- pthread_setconcurrency (3p)
- set the level of concurrency
- pthread_setname_np (3)
- set/get the name of a thread
- pthread_setschedparam (3)
- set/get scheduling policy and parameters of a thread
- pthread_setschedparam (3p)
- dynamic thread scheduling parameters access (REA...
- pthread_setschedprio (3)
- set scheduling priority of a thread
- pthread_setschedprio (3p)
- dynamic thread scheduling parameters access (REAL...
- pthread_setspecific (3p)
- thread-specific data management
- pthread_testcancel (3p)
- set cancelability state
- pwrite (2)
- read from or write to a file descriptor at a given offset
- pwrite64 (2)
- read from or write to a file descriptor at a given offset
- readonly (1p)
- set the readonly attribute for variables
- renice (1p)
- set nice values of running processes
- reset (1)
- terminal initialization
- reset_color_pairs (3ncurses)
- curses color manipulation routines
- reset_prog_mode (3ncurses)
- low-level curses routines
- reset_prog_mode_sp (3ncurses)
- curses screen-pointer extension
- reset_shell_mode (3ncurses)
- low-level curses routines
- reset_shell_mode_sp (3ncurses)
- curses screen-pointer extension
- resetty (3ncurses)
- low-level curses routines
- resetty_sp (3ncurses)
- curses screen-pointer extension
- resize (1)
- set environment and terminal settings to current xterm...
- return (n)
- Return from a procedure, or set return code of a script
- rewind (3p)
- reset the file position indicator in a stream
- rewinddir (3)
- reset directory stream
- rewinddir (3p)
- reset the position of a directory stream to the beginn...
- roff (7)
- concepts and history of roff typesetting
- roff-gf (7)
- concepts and history of roff typesetting
- rpc_gss_set_callback (3t)
- "Register a security context creation callback"
- rpc_gss_set_defaults (3t)
- "set service and quality of protection"
- rpc_gss_set_svc_name (3t)
- "Associate a GSS-API service principal with an RP...
- rpcdebug (8)
- set and clear NFS and RPC kernel debug flags
- rpm_execcon (3)
- get or set the SELinux security context used for execu...
- sa-compile (1)
- compile SpamAssassin ruleset into native code
- sane-hp3900 (5)
- SANE backend for RTS8822 chipset based scanners
- sane-niash (5)
- SANE backend for scanners based on the NIASH chipset
- sasl_server_userdb_setpass_t (3)
- Cyrus SASL documentation
- sasl_setpass (3)
- Cyrus SASL documentation
- sasl_setprop (3)
- Cyrus SASL documentation
- saslpasswd2 (8)
- set a user's sasl password
- sched_getaffinity (2)
- set and get a thread's CPU affinity mask
- sched_getattr (2)
- set and get scheduling policy and attributes
- sched_getparam (2)
- set and get scheduling parameters
- sched_getscheduler (2)
- set and get scheduling policy/parameters
- sched_setaffinity (2)
- set and get a thread's CPU affinity mask
- sched_setattr (2)
- set and get scheduling policy and attributes
- sched_setparam (2)
- set and get scheduling parameters
- sched_setparam (3p)
- set scheduling parameters (REALTIME)
- sched_setscheduler (2)
- set and get scheduling policy/parameters
- sched_setscheduler (3p)
- set scheduling policy and parameters (REALTIME)
- scr_set (3ncurses)
- read (write) a curses screen from (to) a file
- scr_set_sp (3ncurses)
- curses screen-pointer extension
- sd_bus_error_is_set (3)
- sd-bus error handling
- sd_bus_error_set (3)
- sd-bus error handling
- sd_bus_error_set_const (3)
- sd-bus error handling
- sd_bus_error_set_errno (3)
- sd-bus error handling
- sd_bus_error_set_errnof (3)
- sd-bus error handling
- sd_bus_error_set_errnofv (3)
- sd-bus error handling
- sd_bus_error_setf (3)
- sd-bus error handling
- sd_bus_error_setfv (3)
- sd-bus error handling
- sd_bus_get_address (3)
- Set or query the address of the bus connection
- sd_bus_get_allow_interactive_authoriz... (3)
- Set or query properties of a b...
- sd_bus_get_description (3)
- Set or query properties of a bus object
- sd_bus_get_method_call_timeout (3)
- Set or query the default D-Bus method ca...
- sd_bus_get_property (3)
- Set or query D-Bus service properties
- sd_bus_get_property_string (3)
- Set or query D-Bus service properties
- sd_bus_get_property_strv (3)
- Set or query D-Bus service properties
- sd_bus_get_property_trivial (3)
- Set or query D-Bus service properties
- sd_bus_get_scope (3)
- Set or query properties of a bus object
- sd_bus_get_tid (3)
- Set or query properties of a bus object
- sd_bus_get_unique_name (3)
- Set or query properties of a bus object
- sd_bus_is_anonymous (3)
- Set or query properties of a bus object
- sd_bus_is_trusted (3)
- Set or query properties of a bus object
- sd_bus_message_get_allow_interactive_... (3)
- Set and query bus message meta...
- sd_bus_message_get_auto_start (3)
- Set and query bus message metadata
- sd_bus_message_get_destination (3)
- Set and query bus message addressing inf...
- sd_bus_message_get_expect_reply (3)
- Set and query bus message metadata
- sd_bus_message_get_interface (3)
- Set and query bus message addressing infor...
- sd_bus_message_get_member (3)
- Set and query bus message addressing information
- sd_bus_message_get_path (3)
- Set and query bus message addressing information
- sd_bus_message_get_sender (3)
- Set and query bus message addressing information
- sd_bus_message_set_allow_interactive_... (3)
- Set and query bus message meta...
- sd_bus_message_set_auto_start (3)
- Set and query bus message metadata
- sd_bus_message_set_destination (3)
- Set and query bus message addressing inf...
- sd_bus_message_set_expect_reply (3)
- Set and query bus message metadata
- sd_bus_message_set_sender (3)
- Set and query bus message addressing information
- SD_BUS_METHOD_WITH_NAMES_OFFSET (3)
- Declare properties and methods for a D-...
- SD_BUS_METHOD_WITH_OFFSET (3)
- Declare properties and methods for a D-Bus path
- sd_bus_set_address (3)
- Set or query the address of the bus connection
- sd_bus_set_allow_interactive_authoriz... (3)
- Set or query properties of a b...
- sd_bus_set_anonymous (3)
- Set or query properties of a bus object
- sd_bus_set_bus_client (3)
- Configure connection mode for a bus object
- sd_bus_set_close_on_exit (3)
- Control whether to close the bus connection du...
- sd_bus_set_connected_signal (3)
- Control emission of local connection establ...
- sd_bus_set_description (3)
- Set or query properties of a bus object
- sd_bus_set_exec (3)
- Set or query the address of the bus connection
- sd_bus_set_exit_on_disconnect (3)
- Control the exit behavior when the bus ob...
- sd_bus_set_fd (3)
- Set the file descriptors to use for bus communication
- sd_bus_set_method_call_timeout (3)
- Set or query the default D-Bus method ca...
- sd_bus_set_monitor (3)
- Configure connection mode for a bus object
- sd_bus_set_property (3)
- Set or query D-Bus service properties
- sd_bus_set_propertyv (3)
- Set or query D-Bus service properties
- sd_bus_set_sender (3)
- Configure default sender for outgoing messages
- sd_bus_set_server (3)
- Configure connection mode for a bus object
- sd_bus_set_trusted (3)
- Set or query properties of a bus object
- sd_bus_set_watch_bind (3)
- Control socket binding watching on bus connections
- sd_bus_slot_get_description (3)
- Set or query the description of bus slot ob...
- sd_bus_slot_get_userdata (3)
- Set and query the value in the "userdata" field
- sd_bus_slot_set_description (3)
- Set or query the description of bus slot ob...
- sd_bus_slot_set_destroy_callback (3)
- Define the callback function for resou...
- sd_bus_slot_set_floating (3)
- Control whether a bus slot object is "floating"
- sd_bus_slot_set_userdata (3)
- Set and query the value in the "userdata" field
- sd_bus_track_set_destroy_callback (3)
- Define the callback function for reso...
- sd_bus_track_set_recursive (3)
- Track bus peers
- sd_bus_track_set_userdata (3)
- Track bus peers
- SD_EVENT_PRIORITY_IDLE (3)
- Set or retrieve the priority of event sources
- SD_EVENT_PRIORITY_IMPORTANT (3)
- Set or retrieve the priority of event sources
- SD_EVENT_PRIORITY_NORMAL (3)
- Set or retrieve the priority of event sources
- sd_event_set_signal_exit (3)
- Automatically leave event loop on SIGINT and S...
- sd_event_set_watchdog (3)
- Enable event loop watchdog support
- sd_event_source_get_description (3)
- Set or retrieve descriptive names of ev...
- sd_event_source_get_exit_on_failure (3)
- Set or retrieve the exit-on-failure...
- sd_event_source_get_floating (3)
- Set or retrieve 'floating' state of event ...
- sd_event_source_get_priority (3)
- Set or retrieve the priority of event sources
- sd_event_source_get_userdata (3)
- Set or retrieve user data pointer of event...
- sd_event_source_set_child_pidfd_own (3)
- Add a child process state change ev...
- sd_event_source_set_child_process_own (3)
- Add a child process state change ...
- sd_event_source_set_description (3)
- Set or retrieve descriptive names of ev...
- sd_event_source_set_destroy_callback (3)
- Define the callback function for r...
- sd_event_source_set_enabled (3)
- Enable or disable event sources
- sd_event_source_set_exit_on_failure (3)
- Set or retrieve the exit-on-failure...
- sd_event_source_set_floating (3)
- Set or retrieve 'floating' state of event ...
- sd_event_source_set_io_events (3)
- Add an I/O event source to an event loop
- sd_event_source_set_io_fd (3)
- Add an I/O event source to an event loop
- sd_event_source_set_io_fd_own (3)
- Add an I/O event source to an event loop
- sd_event_source_set_memory_pressure_p... (3)
- Add and configure an event sou...
- sd_event_source_set_memory_pressure_type (3)
- Add and configure an event sou...
- sd_event_source_set_prepare (3)
- Set a preparation callback for event sources
- sd_event_source_set_priority (3)
- Set or retrieve the priority of event sources
- sd_event_source_set_ratelimit (3)
- Configure rate limiting on event sources
- sd_event_source_set_ratelimit_expire_... (3)
- Configure rate limiting on eve...
- sd_event_source_set_time (3)
- Add a timer event source to an event loop
- sd_event_source_set_time_accuracy (3)
- Add a timer event source to an event ...
- sd_event_source_set_time_relative (3)
- Add a timer event source to an event ...
- sd_event_source_set_userdata (3)
- Set or retrieve user data pointer of event...
- sd_id128_in_set (3)
- APIs for processing 128-bit IDs
- sd_id128_in_set_sentinel (3)
- APIs for processing 128-bit IDs
- sd_id128_in_setv (3)
- APIs for processing 128-bit IDs
- SD_JOURNAL_FOREACH (3)
- Advance or set back the read pointer in the journal
- SD_JOURNAL_FOREACH_BACKWARDS (3)
- Advance or set back the read pointer in th...
- sd_journal_next (3)
- Advance or set back the read pointer in the journal
- sd_journal_next_skip (3)
- Advance or set back the read pointer in the journal
- sd_journal_previous (3)
- Advance or set back the read pointer in the journal
- sd_journal_previous_skip (3)
- Advance or set back the read pointer in the jo...
- sd_journal_set_data_threshold (3)
- Read data fields from the current journal...
- sd_journal_step_one (3)
- Advance or set back the read pointer in the journal
- SDL_EnableKeyRepeat (3)
- Set keyboard repeat rate.
- SDL_EventState (3)
- This function allows you to set the state of processin...
- SDL_GL_SetAttribute (3)
- Set a special SDL/OpenGL attribute
- SDL_SetAlpha (3)
- Adjust the alpha properties of a surface
- SDL_SetClipRect (3)
- Sets the clipping rectangle for a surface.
- SDL_SetColorKey (3)
- Sets the color key (transparent pixel) in a blittable ...
- SDL_SetColors (3)
- Sets a portion of the colormap for the given 8-bit sur...
- SDL_SetCursor (3)
- Set the currently active mouse cursor.
- SDL_SetEventFilter (3)
- Sets up a filter to process all events before they a...
- SDL_SetGamma (3)
- Sets the color gamma function for the display
- SDL_SetGammaRamp (3)
- Sets the color gamma lookup tables for the display
- SDL_SetModState (3)
- Set the current key modifier state
- SDL_SetPalette (3)
- Sets the colors in the palette of an 8-bit surface.
- SDL_SetTimer (3)
- Set a callback to run after the specified number of mi...
- SDL_SetVideoMode (3)
- Set up a video mode with the specified width, height a...
- SDL_WarpMouse (3)
- Set the position of the mouse cursor.
- SDL_WM_SetCaption (3)
- Sets the window tile and icon name.
- SDL_WM_SetIcon (3)
- Sets the icon for the display window.
- SDLx::FPS (3pm)
- a more convenient way to set a framerate
- seccomp_api_set (3)
- Manage the libseccomp API level
- seccomp_attr_set (3)
- Manage the seccomp filter attributes
- seccomp_reset (3)
- Initialize the seccomp filter state
- security_deny_unknown (3)
- get or set the enforcing state of SELinux
- security_get_checkreqprot (3)
- get or set the enforcing state of SELinux
- security_getenforce (3)
- get or set the enforcing state of SELinux
- security_reject_unknown (3)
- get or set the enforcing state of SELinux
- security_set_boolean (3)
- routines for manipulating SELinux boolean values
- security_set_boolean_list (3)
- routines for manipulating SELinux boolean values
- security_setenforce (3)
- get or set the enforcing state of SELinux
- seekdir (3)
- set the position of the next readdir() call in the dir...
- seekdir (3p)
- set the position of a directory stream
- selinux_lsetfilecon_default (3)
- set the file context to the system defaults
- selinux_restorecon_default_handle (3)
- sets default parameters for selinux_r...
- selinux_restorecon_set_alt_rootpath (3)
- set an alternate rootpath.
- selinux_restorecon_set_exclude_list (3)
- set list of directories to be exclu...
- selinux_restorecon_set_sehandle (3)
- set a labeling handle for use by selinu...
- selinux_set_callback (3)
- userspace SELinux callback facilities
- selinux_set_mapping (3)
- establish dynamic object class and permission mapping
- selinux_set_policy_root (3)
- return the path of the SELinux policy files for...
- semget (2)
- get a System V semaphore set identifier
- semget (3p)
- get set of XSI semaphores
- set (1p)
- set or unset options and positional parameters
- set (n)
- Read and write variables
- set_aumessage_mode (3)
- Sets the message mode
- SET_CONSTRAINTS (7pg16)
- set constraint check timing for the current transac...
- set_current_field (3form)
- set and get form page number
- set_current_item (3menu)
- set and get current_menu_item
- set_curterm (3ncurses)
- curses interfaces to terminfo database
- set_curterm_sp (3ncurses)
- curses screen-pointer extension
- set_escdelay (3ncurses)
- curses thread support
- set_escdelay_sp (3ncurses)
- curses screen-pointer extension
- set_field_back (3form)
- color and attribute control for form fields
- set_field_buffer (3form)
- field buffer control
- set_field_fore (3form)
- color and attribute control for form fields
- set_field_init (3form)
- set hooks for automatic invocation by applications
- set_field_just (3form)
- retrieve field characteristics
- set_field_opts (3form)
- set and get field options
- set_field_pad (3form)
- color and attribute control for form fields
- set_field_status (3form)
- field buffer control
- set_field_term (3form)
- set hooks for automatic invocation by applications
- set_field_type (3form)
- data type validation for fields
- set_field_userptr (3form)
- associate application data with a form field
- set_fieldtype_arg (3form)
- define validation-field types
- set_fieldtype_choice (3form)
- define validation-field types
- set_form_fields (3form)
- make and break connections between fields and forms
- set_form_init (3form)
- set hooks for automatic invocation by applications
- set_form_opts (3form)
- set and get form options
- set_form_page (3form)
- set and get form page number
- set_form_sub (3form)
- make and break form window and subwindow associations
- set_form_term (3form)
- set hooks for automatic invocation by applications
- set_form_userptr (3form)
- associate application data with a form item
- set_form_win (3form)
- make and break form window and subwindow associations
- set_item_init (3menu)
- set hooks for automatic invocation by applications
- set_item_opts (3menu)
- set and get menu item options
- set_item_term (3menu)
- set hooks for automatic invocation by applications
- set_item_userptr (3menu)
- associate application data with a menu item
- set_item_value (3menu)
- set and get menu item values
- set_matchpathcon_flags (3)
- set flags controlling the operation of matchpath...
- set_matchpathcon_invalidcon (3)
- set flags controlling the operation of matc...
- set_matchpathcon_printf (3)
- set flags controlling the operation of matchpat...
- set_max_field (3form)
- field buffer control
- set_mempolicy (2)
- set default NUMA memory policy for a thread and its ch...
- set_menu_back (3menu)
- color and attribute control for menus
- set_menu_fore (3menu)
- color and attribute control for menus
- set_menu_format (3menu)
- set and get menu sizes
- set_menu_grey (3menu)
- color and attribute control for menus
- set_menu_init (3menu)
- set hooks for automatic invocation by applications
- set_menu_items (3menu)
- make and break connections between items and menus
- set_menu_mark (3menu)
- get and set the menu mark string
- set_menu_opts (3menu)
- set and get menu options
- set_menu_pad (3menu)
- color and attribute control for menus
- set_menu_pattern (3menu)
- set and get a menu's pattern buffer
- set_menu_spacing (3menu)
- set and get spacing between menu items.
- set_menu_sub (3menu)
- make and break menu window and subwindow associations
- set_menu_term (3menu)
- set hooks for automatic invocation by applications
- set_menu_userptr (3menu)
- associate application data with a menu item
- set_menu_win (3menu)
- make and break menu window and subwindow associations
- set_new_page (3form)
- form pagination functions
- set_panel_userptr (3curses)
- panel stack extension for curses
- set_polkit_default_privs (8)
- set default privileges for Polkit
- set_robust_list (2)
- get/set list of robust futexes
- SET_ROLE (7pg16)
- set the current user identifier of the current session
- set_selinuxmnt (3)
- initialize the global variable selinux_mnt
- SET_SESSION_AUTHORIZATION (7pg16)
- set the session user identifier and the c...
- set_tabsize (3ncurses)
- curses thread support
- set_tabsize_sp (3ncurses)
- curses screen-pointer extension
- set_term (3ncurses)
- curses screen initialization and manipulation routines
- set_thread_area (2)
- manipulate thread-local storage information
- set_tid_address (2)
- set pointer to thread ID
- set_top_row (3menu)
- set and get current_menu_item
- SET_TRANSACTION (7pg16)
- set the characteristics of the current transaction
- setaliasent (3)
- read an alias entry
- setarch (8)
- change reported architecture in new program environmen...
- setbuf (3)
- stream buffering operations
- setbuf (3p)
- assign buffering to a stream
- setbuffer (3)
- stream buffering operations
- setcchar (3ncurses)
- Get a wide character string and rendition from a cchar...
- setcifsacl (1)
- Userspace helper to alter components of a security des...
- setcon (3)
- get SELinux security context of a process
- setcon_raw (3)
- get SELinux security context of a process
- setcontext (3)
- get or set the user context
- setdomainname (2)
- get/set NIS domain name
- setegid (2)
- set effective user or group ID
- setegid (3p)
- set the effective group ID
- setenforce (8)
- modify the mode SELinux is running in
- setenv (3)
- change or add an environment variable
- setenv (3p)
- add or change environment variable
- seteuid (2)
- set effective user or group ID
- seteuid (3p)
- set effective user ID
- setexeccon (3)
- get or set the SELinux security context used for execu...
- setexeccon_raw (3)
- get or set the SELinux security context used for execu...
- setexecfilecon (3)
- get or set the SELinux security context used for execu...
- setfacl (1)
- set file access control lists
- setfattr (1)
- set extended attributes of filesystem objects
- setfilecon (3)
- set SELinux security context of a file
- setfilecon_raw (3)
- set SELinux security context of a file
- setfiles (8)
- set SELinux file security contexts.
- setfont (8)
- load EGA/VGA console screen font
- setfscreatecon (3)
- get or set the SELinux security context used for creat...
- setfscreatecon_raw (3)
- get or set the SELinux security context used for cre...
- setfsent (3)
- handle fstab entries
- setfsgid (2)
- set group identity used for filesystem checks
- setfsgid32 (2)
- set group identity used for filesystem checks
- setfsuid (2)
- set user identity used for filesystem checks
- setfsuid32 (2)
- set user identity used for filesystem checks
- setgid (2)
- set group identity
- setgid (3p)
- set-group-ID
- setgid32 (2)
- set group identity
- setgrent (3)
- get group file entry
- setgrent (3p)
- reset the group database to the first entry
- setgroups (2)
- get/set list of supplementary group IDs
- setgroups32 (2)
- get/set list of supplementary group IDs
- sethostent (3)
- get network host entry
- sethostent (3p)
- network host database functions
- sethostid (3)
- get or set the unique identifier of the current host
- sethostname (2)
- get/set hostname
- setitimer (2)
- get or set value of an interval timer
- setitimer (3p)
- set the value of an interval timer
- setjmp (3)
- performing a nonlocal goto
- setjmp (3p)
- set jump point for a non-local goto
- setjmp.h (0p)
- stack environment declarations
- setkey (3)
- encrypt 64-bit messages
- setkey (3p)
- set encoding key (CRYPT)
- setkey_r (3)
- encrypt 64-bit messages
- setkeycodes (8)
- load kernel scancode-to-keycode mapping table entries
- setkeycreatecon (3)
- get or set the SELinux security context used for creat...
- setkeycreatecon_raw (3)
- get or set the SELinux security context used for cr...
- setleds (1)
- set the keyboard leds
- setlinebuf (3)
- stream buffering operations
- setlocale (3)
- set the current locale
- setlocale (3p)
- set program locale
- setlogcons (8)
- Send kernel messages to console N
- setlogmask (3)
- set log priority mask
- setlogmask (3p)
- set the log priority mask
- setmetamode (1)
- define the keyboard meta key handling
- setmntent (3)
- get filesystem descriptor file entry
- setnetent (3)
- get network entry
- setnetent (3p)
- network database function
- setnetgrent (3)
- handle network group entries
- setns (2)
- reassociate thread with a namespace
- setpci (8)
- configure PCI devices
- setpgid (2)
- set/get process group
- setpgid (3p)
- set process group ID for job control
- setpgrp (2)
- set/get process group
- setpgrp (3p)
- set the process group ID
- setpriority (2)
- get/set program scheduling priority
- setpriority (3p)
- set the nice value
- setpriv (1)
- run a program with different Linux privilege settings
- setprotoent (3)
- get protocol entry
- setprotoent (3p)
- network protocol database functions
- setpwent (3)
- get password file entry
- setpwent (3p)
- user database function
- setregid (2)
- set real and/or effective user or group ID
- setregid (3p)
- set real and effective group IDs
- setregid32 (2)
- set real and/or effective user or group ID
- setresgid (2)
- set real, effective, and saved user or group ID
- setresgid32 (2)
- set real, effective, and saved user or group ID
- setresuid (2)
- set real, effective, and saved user or group ID
- setresuid32 (2)
- set real, effective, and saved user or group ID
- setreuid (2)
- set real and/or effective user or group ID
- setreuid (3p)
- set real and effective user IDs
- setreuid32 (2)
- set real and/or effective user or group ID
- setrlimit (2)
- get/set resource limits
- setrlimit (3p)
- control maximum resource consumption
- setrpcent (3)
- get RPC entry
- setscrreg (3ncurses)
- curses output options
- setsebool (8)
- set SELinux boolean value
- setserial (8)
- get/set Linux serial port information
- setservent (3)
- get service entry
- setservent (3p)
- network services database functions
- setsid (1)
- run a program in a new session
- setsid (2)
- creates a session and sets the process group ID
- setsid (3p)
- create session and set process group ID
- setsockcreatecon (3)
- get or set the SELinux security context used for creat...
- setsockcreatecon_raw (3)
- get or set the SELinux security context used for c...
- setsockopt (2)
- get and set options on sockets
- setsockopt (3p)
- set the socket options
- setspent (3)
- get shadow password file entry
- setstate (3)
- random number generator
- setstate (3p)
- switch pseudo-random number generator state arrays
- setstate_r (3)
- reentrant random number generator
- setsyx (3ncurses)
- low-level curses routines
- setterm (1)
- set terminal attributes
- setterm (3ncurses)
- curses interfaces to terminfo database
- settimeofday (2)
- get / set time
- setttyent (3)
- get ttys file entry
- setuid (2)
- set user identity
- setuid (3p)
- set user ID
- setuid32 (2)
- set user identity
- setup (2)
- setup devices and filesystems, mount root filesystem
- setupterm (3ncurses)
- curses interfaces to terminfo database
- setusershell (3)
- get permitted user shells
- setutent (3)
- access utmp file entries
- setutxent (3)
- access utmp file entries
- setutxent (3p)
- reset the user accounting database to the first entry
- setvbuf (3)
- stream buffering operations
- setvbuf (3p)
- assign buffering to a stream
- setvesablank (8)
- Turn VESA screen blanking on or off
- setvtrgb (8)
- set the virtual terminal RGB colors
- setxattr (2)
- set an extended attribute value
- setxkbmap (1)
- set the keyboard using the X Keyboard Extension
- sg_format (8)
- format, format with preset, resize SCSI disk; format tape
- sg_ident (8)
- send SCSI REPORT/SET IDENTIFYING INFORMATION command
- sg_reset (8)
- sends SCSI device, target, bus or host reset; or check...
- sg_reset_wp (8)
- send SCSI RESET WRITE POINTER command
- sg_sat_datetime (8)
- report or set date and time on a ATA device
- sg_sat_set_features (8)
- use ATA SET FEATURES command via a SCSI to ATA Tran...
- sg_stpg (8)
- send SCSI SET TARGET PORT GROUPS command
- sg_timestamp (8)
- report or set timestamp on SCSI device
- sharesec (1)
- Set or get share ACLs
- sigaddset (3)
- POSIX signal set operations
- sigaddset (3p)
- add a signal to a signal set
- sigaltstack (2)
- set and/or get signal stack context
- sigaltstack (3p)
- set and get signal alternate stack context
- sigandset (3)
- POSIX signal set operations
- sigdelset (3)
- POSIX signal set operations
- sigdelset (3p)
- delete a signal from a signal set
- sigemptyset (3)
- POSIX signal set operations
- sigemptyset (3p)
- initialize and empty a signal set
- sigfillset (3)
- POSIX signal set operations
- sigfillset (3p)
- initialize and fill a signal set
- sigisemptyset (3)
- POSIX signal set operations
- sigismember (3)
- POSIX signal set operations
- sigismember (3p)
- test for a signal in a signal set
- sigorset (3)
- POSIX signal set operations
- sigset (3)
- System V signal API
- sigset_t (3type)
- overview of system data types
- sigsetjmp (3)
- performing a nonlocal goto
- sigsetjmp (3p)
- set jump point for a non-local goto
- sigsetmask (3)
- BSD signal API
- sigsetops (3)
- POSIX signal set operations
- sigstack (3)
- set and/or get signal stack context
- slk_attr_set (3ncurses)
- curses soft label routines
- slk_attr_set_sp (3ncurses)
- curses screen-pointer extension
- slk_attrset (3ncurses)
- curses soft label routines
- slk_attrset_sp (3ncurses)
- curses screen-pointer extension
- slk_set (3ncurses)
- curses soft label routines
- slk_set_sp (3ncurses)
- curses screen-pointer extension
- slk_wset (3ncurses)
- curses soft label routines
- smbcacls (1)
- Set or get ACLs on an NT file or directory names
- smbcquotas (1)
- Set or get QUOTAs of NTFS 5 shares
- snmpset (1)
- communicates with a network entity using SNMP SET requ...
- snmpstatus (1)
- retrieves a fixed set of management information from a...
- spacing (3menu)
- set and get spacing between menu items.
- spfquery (1) - (Mail::SPF)
- Checks if a given set of e-mail paramete...
- ssetmask (2)
- manipulation of signal mask (obsolete)
- stime (2)
- set time
- streqvmap (3)
- Set the character mappings for the streqv functions
- strpbrk (3)
- search a string for any of a set of bytes
- stty (1)
- change and print terminal line settings
- stty (1p)
- set the options for a terminal
- susetags2solv (1)
- convert the susetags repository format into a solv file
- svc_getreqset (3)
- library routines for remote procedure calls
- systemd-cryptsetup (8)
- Full disk decryption logic
- systemd-cryptsetup-generator (8)
- Unit generator for /etc/crypttab
- systemd-cryptsetup@.service (8)
- Full disk decryption logic
- systemd-firstboot (1)
- Initialize basic system settings on or before the fir...
- systemd-firstboot.service (1)
- Initialize basic system settings on or before...
- systemd-integritysetup (8)
- Disk integrity protection logic
- systemd-integritysetup-generator (8)
- Unit generator for integrity protected...
- systemd-integritysetup@.service (8)
- Disk integrity protection logic
- systemd-machine-id-setup (1)
- Initialize the machine ID in /etc/machine-id
- systemd-tmpfiles-setup-dev-early.service (8)
- Creates, deletes and cleans up...
- systemd-tmpfiles-setup-dev.service (8)
- Creates, deletes and cleans up volat...
- systemd-tmpfiles-setup.service (8)
- Creates, deletes and cleans up volatile ...
- systemd-udev-settle.service (8)
- Wait for all pending udev events to be handled
- systemd-vconsole-setup (8)
- Configure the virtual consoles
- systemd-vconsole-setup.service (8)
- Configure the virtual consoles
- systemd-veritysetup (8)
- Disk verity protection logic
- systemd-veritysetup-generator (8)
- Unit generator for verity protected block...
- systemd-veritysetup@.service (8)
- Disk verity protection logic
- systemd.preset (5)
- Service enablement presets
- systemd.resource-control (5)
- Resource control unit settings
- tabs (1)
- set tabs on a terminal
- tabs (1p)
- set terminal tabs
- taskset (1)
- set or retrieve a process's CPU affinity
- tc (8)
- show / manipulate traffic control settings
- tcdrain (3)
- get and set terminal attributes, line control, get and...
- tcflow (3)
- get and set terminal attributes, line control, get and...
- tcflush (3)
- get and set terminal attributes, line control, get and...
- tcgetattr (3)
- get and set terminal attributes, line control, get and...
- tcgetpgrp (3)
- get and set terminal foreground process group
- tcsendbreak (3)
- get and set terminal attributes, line control, get and...
- tcsetattr (3)
- get and set terminal attributes, line control, get and...
- tcsetattr (3p)
- set the parameters associated with the terminal
- tcsetpgrp (3)
- get and set terminal foreground process group
- tcsetpgrp (3p)
- set the foreground process group ID
- tdbc_resultset (n)
- TDBC result set object
- termios (3)
- get and set terminal attributes, line control, get and...
- terms (5)
- database of blessed terminals for xtermset.
- textdomain (3)
- set domain for future gettext() calls
- timer_settime (2)
- arm/disarm and fetch state of POSIX per-process timer
- timerfd_settime (2)
- timers that notify via file descriptors
- timerisset (3)
- timeval operations
- tis-620 (7)
- ISO 8859-11 character set encoded in octal, decimal, a...
- top_row (3menu)
- set and get current_menu_item
- tracker-writeback-3 (1)
- Used to write metadata set in Tracker back to physi...
- tracker3-reset (1)
- Reset the index and configuration
- tset (1)
- terminal initialization
- tunelp (8)
- set various parameters for the lp device
- tzset (3p)
- set timezone conversion information
- tzset (3)
- initialize time conversion information
- uclampset (1)
- manipulate the utilization clamping attributes of the ...
- udev_device_get_current_tags_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_devlinks_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_properties_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_property_value (3)
- Retrieve or set device attributes
- udev_device_get_sysattr_list_entry (3)
- Retrieve or set device attributes
- udev_device_get_sysattr_value (3)
- Retrieve or set device attributes
- udev_device_get_tags_list_entry (3)
- Retrieve or set device attributes
- udev_device_has_current_tag (3)
- Retrieve or set device attributes
- udev_device_has_tag (3)
- Retrieve or set device attributes
- udev_device_set_sysattr_value (3)
- Retrieve or set device attributes
- udev_monitor_set_receive_buffer_size (3)
- Query and modify device monitor
- ugetrlimit (2)
- get/set resource limits
- ulimit (1p)
- set or report file size limit
- ulimit (3)
- get and set user limits
- ulimit (3p)
- get and set process limits
- umask (1p)
- get or set the file mode creation mask
- umask (2)
- set file mode creation mask
- umask (3p)
- set and get the file mode creation mask
- unfocus_current_field (3form)
- set and get form page number
- unicode (7)
- universal character set
- unset (1p)
- unset values and attributes of variables and functions
- unset (n)
- Delete variables
- unsetenv (3)
- change or add an environment variable
- unsetenv (3p)
- remove an environment variable
- uselocale (3)
- set/get the locale for the calling thread
- user-dirs.defaults (5)
- default settings for XDG user dirs
- user-dirs.dirs (5)
- settings for XDG user dirs
- utempter_set_helper (8)
- privileged helper program for utmp/wtmp updates
- utime (3p)
- set file access and modification times
- utimensat (3p)
- set file access and modification times relative to dir...
- uuid_clear (3)
- reset value of UUID variable to the NULL value
- VALUES (7pg16)
- compute a set of rows
- veritysetup (8)
- manage dm-verity (block level verification) volumes
- vline_set (3ncurses)
- create curses borders or lines using complex character...
- wattr_set (3ncurses)
- curses character and window attribute control routines
- wattrset (3ncurses)
- curses character and window attribute control routines
- wbkgdset (3ncurses)
- curses window background manipulation routines
- wbkgrndset (3ncurses)
- curses window complex background manipulation routines
- wborder_set (3ncurses)
- create curses borders or lines using complex charact...
- wcolor_set (3ncurses)
- curses character and window attribute control routines
- wcscspn (3)
- search a wide-character string for any of a set of wid...
- wcspbrk (3)
- search a wide-character string for any of a set of wid...
- whline_set (3ncurses)
- create curses borders or lines using complex characte...
- wmemset (3)
- fill an array of wide-characters with a constant wide ...
- wmemset (3p)
- set wide characters in memory
- wsetscrreg (3ncurses)
- curses output options
- wvline_set (3ncurses)
- create curses borders or lines using complex characte...
- XAddToSaveSet (3)
- change a client's save set
- XAllocClassHint (3)
- allocate class hints structure and set or read a windo...
- XAllocIconSize (3)
- allocate icon size structure and set or read a window'...
- XAllocSizeHints (3)
- allocate size hints structure and set or read a window...
- XAllocStandardColormap (3)
- allocate, set, or read a standard colormap struc...
- XAllocWMHints (3)
- allocate window manager hints structure and set or rea...
- XAutoRepeatOff (3)
- manipulate keyboard settings and keyboard control stru...
- XAutoRepeatOn (3)
- manipulate keyboard settings and keyboard control stru...
- XBaseFontNameListOfFontSet (3)
- obtain fontset information
- XBell (3)
- manipulate keyboard settings and keyboard control stru...
- XChangeKeyboardControl (3)
- manipulate keyboard settings and keyboard contro...
- XChangeSaveSet (3)
- change a client's save set
- XClassHint (3)
- allocate class hints structure and set or read a windo...
- XcmsSetCCCOfColormap (3)
- query and modify CCC of a colormap
- XcmsSetWhiteAdjustProc (3)
- modifying CCC attributes
- XcmsSetWhitePoint (3)
- modifying CCC attributes
- XcmsStoreColor (3)
- set colors
- XcmsStoreColors (3)
- set colors
- XContextDependentDrawing (3)
- obtain fontset information
- XContextualDrawing (3)
- obtain fontset information
- XCreateFontSet (3)
- create and free an international text drawing font set
- xdg-settings (1)
- get various settings from the desktop environment
- XDirectionalDependentDrawing (3)
- obtain fontset information
- xdr_setpos (3)
- library routines for external data representation
- XExtentsOfFontSet (3)
- obtain the maximum extents structure for a font set
- XFetchName (3)
- set or read a window's WM_NAME property
- XFontSetExtents (3)
- XFontSetExtents structure
- XFontsOfFontSet (3)
- obtain fontset information
- XFreeFontPath (3)
- set, get, or free the font search path
- XFreeFontSet (3)
- create and free an international text drawing font set
- XGetClassHint (3)
- allocate class hints structure and set or read a windo...
- XGetCommand (3)
- set or read a window's WM_COMMAND property
- XGetErrorDatabaseText (3)
- default error handlers
- XGetFontPath (3)
- set, get, or free the font search path
- XGetIconName (3)
- set or read a window's WM_ICON_NAME property
- XGetIconSizes (3)
- allocate icon size structure and set or read a window'...
- XGetICValues (3)
- set and obtain XIC values
- XGetKeyboardControl (3)
- manipulate keyboard settings and keyboard control s...
- XGetPointerMapping (3)
- manipulate pointer settings
- XGetRGBColormaps (3)
- allocate, set, or read a standard colormap structure
- XGetTextProperty (3)
- set and read text properties
- XGetTransientForHint (3)
- set or read a window's WM_TRANSIENT_FOR property
- XGetWMClientMachine (3)
- set or read a window's WM_CLIENT_MACHINE property
- XGetWMColormapWindows (3)
- set or read a window's WM_COLORMAP_WINDOWS property
- XGetWMHints (3)
- allocate window manager hints structure and set or rea...
- XGetWMIconName (3)
- set or read a window's WM_ICON_NAME property
- XGetWMName (3)
- set or read a window's WM_NAME property
- XGetWMNormalHints (3)
- allocate size hints structure and set or read a windo...
- XGetWMProtocols (3)
- set or read a window's WM_PROTOCOLS property
- XGetWMSizeHints (3)
- allocate size hints structure and set or read a window...
- XIconSize (3)
- allocate icon size structure and set or read a window'...
- XIGetClientPointer (3)
- set or get the ClientPointer device.
- XIGetFocus (3)
- set or get the device's focus.
- XISetClientPointer (3)
- set or get the ClientPointer device.
- XISetFocus (3)
- set or get the device's focus.
- XkbActionSetCtrls (3)
- Sets the ctrls0 through ctrls3 fields of act from ctrls
- XkbForceBell (3)
- Overrides user preference settings for audible bells t...
- XkbGetAutoResetControls (3)
- Gets the current values of the auto-reset controls
- XkbGetKeyActions (3)
- Update the actions (the key_acts array) for a subset o...
- XkbGetKeyboardByName (3)
- Build a new keyboard description from a set of nam...
- XkbGetKeySyms (3)
- Obtain the symbols for a subset of the keys in a keybo...
- XkbGetVirtualMods (3)
- Obtain a subset of the virtual modifier bindings (the...
- XkbInitCanonicalKeyTypes (3)
- Set the definitions of the canonical key types...
- XkbKeysymToModifiers (3)
- Finds the set of modifiers bound to a particular k...
- XkbSARedirectSetVMods (3)
- Sets the vmods0 and vmods1 of act from v
- XkbSARedirectSetVModsMask (3)
- Sets the vmods_mask0 and vmods_mask1 fields o...
- XkbSASetGroup (3)
- Sets the group_XXX field of act from the group index grp
- XkbSASetPtrDfltValue (3)
- Sets the valueXXX field of act from val
- XkbSASetScreen (3)
- Sets the screenXXX field of act from s
- XkbSetAutoRepeatRate (3)
- Sets the attributes of the RepeatKeys control for ...
- XkbSetAutoResetControls (3)
- Changes the current values of the AutoReset con...
- XkbSetCompatMap (3)
- Modify the server's compatibility map
- XkbSetControls (3)
- Copies changes to the X server based on a modified ctr...
- XkbSetDebuggingFlags (3)
- Change the values of any of the debug controls
- XkbSetDetectableAutoRepeat (3)
- Sets DetectableAutoRepeat
- XkbSetDeviceButtonActions (3)
- Change only the button actions for an input e...
- XkbSetDeviceInfo (3)
- Modify some or all of the characteristics of an X Inpu...
- XkbSetIgnoreLockMods (3)
- Sets the modifiers that, if locked, are not to be ...
- XkbSetIndicatorMap (3)
- Downloads the changes to the server based on modific...
- XkbSetMap (3)
- Send a complete new set of values for entire component...
- XkbSetModActionVMods (3)
- Sets the vmods1 and vmods2 fields of act using the...
- XkbSetNamedDeviceIndicator (3)
- Names an indicator if it is not already name...
- XkbSetNamedIndicator (3)
- Names an indicator if it is not already named; tog...
- XkbSetNames (3)
- Change the symbolic names in the server
- XkbSetPtrActionX (3)
- Sets the high_XXX and low_XXX fields of act from the s...
- XkbSetPtrActionY (3)
- Sets the high_YYY and low_YYY fields of act from the s...
- XkbSetServerInternalMods (3)
- Sets the modifiers that are consumed by the se...
- XkbSetXlibControls (3)
- Changes the state of the Library Controls
- XKeyboardControl (3)
- manipulate keyboard settings and keyboard control stru...
- XLocaleOfFontSet (3)
- obtain fontset information
- XmbDrawImageString (3)
- draw image text using a single font set
- XmbDrawString (3)
- draw text using a single font set
- XmbDrawText (3)
- draw text using multiple font sets
- XmbResetIC (3)
- reset the state of an input context
- XmbSetWMProperties (3)
- set standard window properties
- XOffsetRegion (3)
- region arithmetic
- XQueryKeymap (3)
- manipulate keyboard settings and keyboard control stru...
- XRemoveFromSaveSet (3)
- change a client's save set
- XResetScreenSaver (3)
- manipulate the screen saver
- XrmSetDatabase (3)
- retrieve and store resource databases
- xscreensaver-settings (1)
- configure and control the xscreensaver daemon
- xset (1)
- user preference utility for X
- XSetAccessControl (3)
- control host access and host control structure
- XSetAfterFunction (3)
- enable or disable synchronization
- XSetArcMode (3)
- GC convenience routines
- XSetBackground (3)
- GC convenience routines
- XSetClassHint (3)
- allocate class hints structure and set or read a windo...
- XSetClipMask (3)
- GC convenience routines
- XSetClipOrigin (3)
- GC convenience routines
- XSetClipRectangles (3)
- GC convenience routines
- XSetCloseDownMode (3)
- control clients
- XSetCommand (3)
- set or read a window's WM_COMMAND property
- XSetDashes (3)
- GC convenience routines
- XSetDeviceButtonMapping (3)
- query or change device button mappings
- XSetDeviceFocus (3)
- control extension input device focus
- XSetDeviceMode (3)
- change the mode of a device
- XSetDeviceModifierMapping (3)
- query or change device modifier mappings
- XSetDeviceValuators (3)
- initialize the valuators on an extension input device
- XSetErrorHandler (3)
- default error handlers
- XSetEventQueueOwner (3)
- set event queue owner on a shared Xlib/XCB connection
- XSetFillRule (3)
- GC convenience routines
- XSetFillStyle (3)
- GC convenience routines
- XSetFont (3)
- GC convenience routines
- XSetFontPath (3)
- set, get, or free the font search path
- XSetForeground (3)
- GC convenience routines
- XSetFunction (3)
- GC convenience routines
- XSetGraphicsExposure (3)
- GC convenience routines
- XSetICFocus (3)
- set and unset input context focus
- XSetIconName (3)
- set or read a window's WM_ICON_NAME property
- XSetIconSizes (3)
- allocate icon size structure and set or read a window'...
- XSetICValues (3)
- set and obtain XIC values
- XSetIMValues (3)
- open, close, and obtain input method information
- XSetInputFocus (3)
- control input focus
- XSetIOErrorHandler (3)
- default error handlers
- XSetLineAttributes (3)
- GC convenience routines
- XSetLocaleModifiers (3)
- determine locale support and configure locale modif...
- XSetModifierMapping (3)
- manipulate keyboard encoding and keyboard encoding ...
- XSetOCValues (3)
- create output contexts
- XSetOMValues (3)
- open output methods
- XSetPlaneMask (3)
- GC convenience routines
- XSetPointerMapping (3)
- manipulate pointer settings
- XSetRegion (3)
- create or destroy regions
- XSetRGBColormaps (3)
- allocate, set, or read a standard colormap structure
- xsetroot (1)
- root window parameter setting utility for X
- XSetScreenSaver (3)
- manipulate the screen saver
- XSetSelectionOwner (3)
- manipulate window selection
- XSetState (3)
- GC convenience routines
- XSetStipple (3)
- GC convenience routines
- XSetSubwindowMode (3)
- GC convenience routines
- XSetTextProperty (3)
- set and read text properties
- XSetTile (3)
- GC convenience routines
- xsettingsd (1)
- provides settings to X11 applications
- XSetTransientForHint (3)
- set or read a window's WM_TRANSIENT_FOR property
- XSetTSOrigin (3)
- GC convenience routines
- xsetwacom (1)
- commandline utility to query and modify wacom driver s...
- XSetWindowAttributes (3)
- create windows and window attributes structure
- XSetWindowBackground (3)
- change window attributes
- XSetWindowBackgroundPixmap (3)
- change window attributes
- XSetWindowBorder (3)
- change window attributes
- XSetWindowBorderPixmap (3)
- change window attributes
- XSetWindowBorderWidth (3)
- configure windows and window changes structure
- XSetWindowColormap (3)
- change window attributes
- XSetWMClientMachine (3)
- set or read a window's WM_CLIENT_MACHINE property
- XSetWMColormapWindows (3)
- set or read a window's WM_COLORMAP_WINDOWS property
- XSetWMHints (3)
- allocate window manager hints structure and set or rea...
- XSetWMIconName (3)
- set or read a window's WM_ICON_NAME property
- XSetWMName (3)
- set or read a window's WM_NAME property
- XSetWMNormalHints (3)
- allocate size hints structure and set or read a windo...
- XSetWMProperties (3)
- set standard window properties
- XSetWMProtocols (3)
- set or read a window's WM_PROTOCOLS property
- XSetWMSizeHints (3)
- allocate size hints structure and set or read a window...
- XShapeOffsetShape (3)
- X nonrectangular shape functions
- XSizeHints (3)
- allocate size hints structure and set or read a window...
- XStandardColormap (3)
- allocate, set, or read a standard colormap structure
- XStoreColor (3)
- set colors
- XStoreColors (3)
- set colors
- XStoreName (3)
- set or read a window's WM_NAME property
- XStoreNamedColor (3)
- set colors
- xtables-legacy (8)
- iptables using old getsockopt/setsockopt-based kernel api
- xtables-monitor (8)
- show changes to rule set and trace-events
- xtermset (1)
- change settings of an xterm
- XTestSetGContextOfGC (3)
- XTest extension functions
- XTestSetVisualIDOfVisual (3)
- XTest extension functions
- XUnsetICFocus (3)
- set and unset input context focus
- Xutf8DrawImageString (3)
- draw image text using a single font set
- Xutf8DrawString (3)
- draw text using a single font set
- Xutf8DrawText (3)
- draw text using multiple font sets
- Xutf8ResetIC (3)
- reset the state of an input context
- Xutf8SetWMProperties (3)
- set standard window properties
- XwcDrawImageString (3)
- draw image text using a single font set
- XwcDrawString (3)
- draw text using a single font set
- XwcDrawText (3)
- draw text using multiple font sets
- XwcResetIC (3)
- reset the state of an input context
- XWMHints (3)
- allocate window manager hints structure and set or rea...
- yast2 (8)
- "Yet another Setup Tool", the installation and configu...
- ypdomainname (1)
- show or set the system's NIS/YP domain name
- ypset (8)
- bind ypbind to a particular NIS server
- yuvinactive (1)
- Set a part of the video to a defined state
- zramctl (8)
- set up and control zram devices
home | help