x SuSE Linux 13.1-RELEASE x
x SuSE Linux 13.1-RELEASEx
readv(2) System Calls Manual readv(2)
NAME
readv, writev, preadv, pwritev, preadv2, pwritev2 - read or write data
into multiple buffers
LIBRARY
Standard C library (libc, -lc)
SYNOPSIS
#include <sys/uio.h>
ssize_t readv(int fd, const struct iovec *iov, int iovcnt);
ssize_t writev(int fd, const struct iovec *iov, int iovcnt);
ssize_t preadv(int fd, const struct iovec *iov, int iovcnt,
off_t offset);
ssize_t pwritev(int fd, const struct iovec *iov, int iovcnt,
off_t offset);
ssize_t preadv2(int fd, const struct iovec *iov, int iovcnt,
off_t offset, int flags);
ssize_t pwritev2(int fd, const struct iovec *iov, int iovcnt,
off_t offset, int flags);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
preadv(), pwritev():
Since glibc 2.19:
_DEFAULT_SOURCE
glibc 2.19 and earlier:
_BSD_SOURCE
DESCRIPTION
The readv() system call reads iovcnt buffers from the file associated
with the file descriptor fd into the buffers described by iov ("scatter
input").
The writev() system call writes iovcnt buffers of data described by iov
to the file associated with the file descriptor fd ("gather output").
The pointer iov points to an array of iovec structures, described in
iovec(3type).
The readv() system call works just like read(2) except that multiple
buffers are filled.
The writev() system call works just like write(2) except that multiple
buffers are written out.
Buffers are processed in array order. This means that readv() com-
pletely fills iov[0] before proceeding to iov[1], and so on. (If there
is insufficient data, then not all buffers pointed to by iov may be
filled.) Similarly, writev() writes out the entire contents of iov[0]
before proceeding to iov[1], and so on.
The data transfers performed by readv() and writev() are atomic: the
data written by writev() is written as a single block that is not in-
termingled with output from writes in other processes; analogously,
readv() is guaranteed to read a contiguous block of data from the file,
regardless of read operations performed in other threads or processes
that have file descriptors referring to the same open file description
(see open(2)).
preadv() and pwritev()
The preadv() system call combines the functionality of readv() and
pread(2). It performs the same task as readv(), but adds a fourth ar-
gument, offset, which specifies the file offset at which the input op-
eration is to be performed.
The pwritev() system call combines the functionality of writev() and
pwrite(2). It performs the same task as writev(), but adds a fourth
argument, offset, which specifies the file offset at which the output
operation is to be performed.
The file offset is not changed by these system calls. The file re-
ferred to by fd must be capable of seeking.
preadv2() and pwritev2()
These system calls are similar to preadv() and pwritev() calls, but add
a fifth argument, flags, which modifies the behavior on a per-call ba-
sis.
Unlike preadv() and pwritev(), if the offset argument is -1, then the
current file offset is used and updated.
The flags argument contains a bitwise OR of zero or more of the follow-
ing flags:
RWF_DSYNC (since Linux 4.7)
Provide a per-write equivalent of the O_DSYNC open(2) flag.
This flag is meaningful only for pwritev2(), and its effect ap-
plies only to the data range written by the system call.
RWF_HIPRI (since Linux 4.6)
High priority read/write. Allows block-based filesystems to use
polling of the device, which provides lower latency, but may use
additional resources. (Currently, this feature is usable only
on a file descriptor opened using the O_DIRECT flag.)
RWF_SYNC (since Linux 4.7)
Provide a per-write equivalent of the O_SYNC open(2) flag. This
flag is meaningful only for pwritev2(), and its effect applies
only to the data range written by the system call.
RWF_NOWAIT (since Linux 4.14)
Do not wait for data which is not immediately available. If
this flag is specified, the preadv2() system call will return
instantly if it would have to read data from the backing storage
or wait for a lock. If some data was successfully read, it will
return the number of bytes read. If no bytes were read, it will
return -1 and set errno to EAGAIN (but see BUGS). Currently,
this flag is meaningful only for preadv2().
RWF_APPEND (since Linux 4.16)
Provide a per-write equivalent of the O_APPEND open(2) flag.
This flag is meaningful only for pwritev2(), and its effect ap-
plies only to the data range written by the system call. The
offset argument does not affect the write operation; the data is
always appended to the end of the file. However, if the offset
argument is -1, the current file offset is updated.
RETURN VALUE
On success, readv(), preadv(), and preadv2() return the number of bytes
read; writev(), pwritev(), and pwritev2() return the number of bytes
written.
Note that it is not an error for a successful call to transfer fewer
bytes than requested (see read(2) and write(2)).
On error, -1 is returned, and errno is set to indicate the error.
ERRORS
The errors are as given for read(2) and write(2). Furthermore,
preadv(), preadv2(), pwritev(), and pwritev2() can also fail for the
same reasons as lseek(2). Additionally, the following errors are de-
fined:
EINVAL The sum of the iov_len values overflows an ssize_t value.
EINVAL The vector count, iovcnt, is less than zero or greater than the
permitted maximum.
EOPNOTSUPP
An unknown flag is specified in flags.
VERSIONS
C library/kernel differences
The raw preadv() and pwritev() system calls have call signatures that
differ slightly from that of the corresponding GNU C library wrapper
functions shown in the SYNOPSIS. The final argument, offset, is un-
packed by the wrapper functions into two arguments in the system calls:
unsigned long pos_l, unsigned long pos
These arguments contain, respectively, the low order and high order 32
bits of offset.
STANDARDS
readv()
writev()
POSIX.1-2008.
preadv()
pwritev()
BSD.
preadv2()
pwritev2()
Linux.
HISTORY
readv()
writev()
POSIX.1-2001, 4.4BSD (first appeared in 4.2BSD).
preadv(), pwritev(): Linux 2.6.30, glibc 2.10.
preadv2(), pwritev2(): Linux 4.6, glibc 2.26.
Historical C library/kernel differences
To deal with the fact that IOV_MAX was so low on early versions of
Linux, the glibc wrapper functions for readv() and writev() did some
extra work if they detected that the underlying kernel system call
failed because this limit was exceeded. In the case of readv(), the
wrapper function allocated a temporary buffer large enough for all of
the items specified by iov, passed that buffer in a call to read(2),
copied data from the buffer to the locations specified by the iov_base
fields of the elements of iov, and then freed the buffer. The wrapper
function for writev() performed the analogous task using a temporary
buffer and a call to write(2).
The need for this extra effort in the glibc wrapper functions went away
with Linux 2.2 and later. However, glibc continued to provide this be-
havior until glibc 2.10. Starting with glibc 2.9, the wrapper func-
tions provide this behavior only if the library detects that the system
is running a Linux kernel older than Linux 2.6.18 (an arbitrarily se-
lected kernel version). And since glibc 2.20 (which requires a minimum
of Linux 2.6.32), the glibc wrapper functions always just directly in-
voke the system calls.
NOTES
POSIX.1 allows an implementation to place a limit on the number of
items that can be passed in iov. An implementation can advertise its
limit by defining IOV_MAX in <limits.h> or at run time via the return
value from sysconf(_SC_IOV_MAX). On modern Linux systems, the limit is
1024. Back in Linux 2.0 days, this limit was 16.
BUGS
Linux 5.9 and Linux 5.10 have a bug where preadv2() with the RWF_NOWAIT
flag may return 0 even when not at end of file.
EXAMPLES
The following code sample demonstrates the use of writev():
char *str0 = "hello ";
char *str1 = "world\n";
ssize_t nwritten;
struct iovec iov[2];
iov[0].iov_base = str0;
iov[0].iov_len = strlen(str0);
iov[1].iov_base = str1;
iov[1].iov_len = strlen(str1);
nwritten = writev(STDOUT_FILENO, iov, 2);
SEE ALSO
pread(2), read(2), write(2)
Linux man-pages 6.04 2023-03-30 readv(2)
Want to link to this manual page? Use this URL:
<http://star2.abcm.com/cgi-bin/bsdi-man?query=pwritev&sektion=2&manpath=>