x SuSE Linux 13.1-RELEASE x
x SuSE Linux 13.1-RELEASEx
hpasmcli(4) hpasm commands hpasmcli(4)
NAME
hpasmcli - HP management CLI
SYNOPSIS
hpasmcli [-s "<command1>;<command2>;...<commandN>"]
DESCRIPTION
hpasmcli is a scriptable command line interface for interacting with
the hpasmd or hpasmxld or hpasmlited management daemons depending on
host Proliant server. It is used to view/set/modify BIOS settings such
as hyperthreading, boot control, and UID LEDs. It can be used to dis-
play hardware status, such as fans, power supplies, etc. It also can
show, repair, and clear the IML.
The CLI supports TAB completion of command names and has a history buf-
fer that can be accessed using the up/down arrows.
In addition to the command line interface, hpasmcli also supports a
mode that is usable for incorporating into basic shell scripts. The
return value of hpasmcli in script mode can be used to verify a command
executed successfully. If multiple commands are executed, only the sta-
tus of the last command is returned to the shell. As an example, the
following first executes the <SHOW SERVER> command to retrieve basic
system information, and next reads the status of the UID:
hpasmcli -s "show server; show uid"
OPTIONS
-s "<command1>;<command2;...<commandN>"
Enables script mode. hpasmcli will execute the commands listed as argu-
ments in the order written. At least one command must be specified.
COMMANDS
[ CLEAR | DISABLE | ENABLE | EXIT | HELP | NOTE | QUIT |REPAIR | SET |
SHOW ]
CLEAR [ IML ]
Clears the specified feature.
DISABLE [ ASR | HT | PXE [ NIC1 | NIC2 | NIC3 | NIC4 | NIC5 ] | WOL ]
Disables the specified feature.
ASR - Disables Automatic Server Recovery.
HT - Disables Processor Hyper-Threading.
PXE - Disables PXE BOOT on specified NIC.
WOL - Disables Wake-On-Lan feature.
ENABLE [ ASR | HT | PXE [ NIC1 | NIC2 | NIC3 | NIC4 | NIC5 ] | WOL ]
Enables the specified feature.
ASR - Enables Automatic Server Recovery.
HT - Enables Processor Hyper-Threading.
PXE - Enables PXE BOOT on specified NIC.
WOL - Enables Wake-On-Lan feature.
EXIT - Quit the program.
HELP - Provides assistance on the available commands.
NOTE [ IML ]
IML - Add a maintenance note to the IML.
QUIT - Exit the program.
REPAIR [ IML ]
IML <entry> - Mark an IML entry as repaired.
SET [ ASR <timeout> | BOOT [ FIRST [ CDROM | FLOPPY | HDD | PXE |
USBKEY ] | ONCE [ CDROM | FLOPPY | HDD | PXE | RBSU ] ] | F1 [ ENABLED
| DELAYED | DISABLED ] | NAME <string> | SERIAL [ BIOS | EMBEDDED |
VIRTUAL ] | UID [ ON | OFF ]
Sets or configured the feature as specified.
ASR <timeout> sets the timeout value of ASR.
BOOT sets the first boot device or the onetime boot option. FIRST
sets the first boot device. ONCE sets the next boot device.
F1 sets the desired POST F1 prompt behavior.
ENABLED means to enable POST F1 prompt.
DELAYED means to enable F1 prompt but timeout and continue
booting if no input.
DISABLED means don't stop POST at F1.
NAME <string> - Set the system name.
SET SERIAL BIOS [ COM1 BAUD | COM2 BAUD | DISABLED ] - Set the
BIOS serial COM port baud rate. Baud rate must be either 9600,
19200, 57600 or 115200.
SET SERIAL EMBEDDED [ PORTA | PORTB ]. - Set the embedded serial
port to COM1, COM2, COM3, COM4, or DISABLED.
SET SERIAL VIRTUAL [ COM1 | COM2 | DISABLED ] - Set virtual COM
port to COM1, COM2, or DISABLED.
UID [ ON | OFF ] - Turn the UID on/off. In blinking state set uid
on/off command will take effect but will continue to show UID as
blinking till Remote Insight is closed.
SHOW [ ASR | BOOT | DIMM <SPD> | F1 | FANS | HT | IML | IPL | NAME |
PORTMAP | POWERSUPPLY | PXE | SERIAL [ BIOS | EMBEDDED | VIRTUAL ] |
SERVER | TEMP | UID | WOL ]
Show the current status or configuration of the selected feature.
ASR - Displays the Automatic System Recovery status and timeout.
BOOT - Displays the current first boot device and one time boot
option.
DIMM - Displays the current memory dimm configuration. Optionally
will dump the SPD bytes if available.
F1 - Displays the configuration of the POST F1 prompt.
FANS - Displays the current status and fan configuration.
HT - Displays the status of Processor Hyper-Threading.
IML - Displays the Integrated Management Log.
IPL - Displays the current boot order.
NAME - Displays the System Name.
PORTMAP - Displays the NIC port Mapping information.
POWERSUPPLY - Displays current Powersupply status and configura-
tion.
PXE - Displays the PXE configuration of each embedded NIC.
SERIAL BIOS - Displays the current BIOS console redirection port
setting.
SERIAL EMBEDDED - Displays the current embedded serial port set-
ting.
SERIAL VIRTUAL - Displays the current virtual serial port setting.
SERVER - Displays various information about the system.
TEMP - Displays the current status of the temperature sensors.
UID - Displays the current status of the UID LED.
WOL - Displays the current Wake-On-Lan configuration.
EXAMPLES
Show the system fan and temp status.
hpasmcli -s <SHOW FANS; SHOW TEMP>
Turn the UID on.
hpasmcli -s <SET UID ON>
LIMITATIONS
This utility requires the health driver (hpasmd, hpasmxld or hpasm-
lited) to be loaded. Some commands may not be supported on all servers.
This includes commands that use features only available on servers with
an iLo chip. Other commands may only make sense on certain specific
Proliant servers.
AUTHOR
Hewlett-Packard Company <http://www.hp.com/linux>.
COPYRIGHT
Copyright (c) 2011 Hewlett-Packard Development Company, L.P.
Version 8.2.0 Aug 05, 2008 hpasmcli(4)
Want to link to this manual page? Use this URL:
<http://star2.abcm.com/cgi-bin/bsdi-man?query=hpasmcli&sektion=4&manpath=>