x SuSE Linux 13.1-RELEASE x
x SuSE Linux 13.1-RELEASEx
VGSCAN(8) System Manager's Manual VGSCAN(8)
NAME
vgscan -- Search for all volume groups
SYNOPSIS
vgscan
[ option_args ]
DESCRIPTION
vgscan scans all supported LVM block devices in the system for VGs.
USAGE
vgscan
[ --ignorelockingfailure ]
[ --mknodes ]
[ --notifydbus ]
[ --reportformat basic|json|json_std ]
[ COMMON_OPTIONS ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override lvm.conf(5) set-
tings. The String arg uses the same format as lvm.conf(5), or
may use section/field syntax. See lvm.conf(5) for more informa-
tion about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail
of messages sent to the log file and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the
command. Devices not listed will appear to be missing. This op-
tion can be repeated, or accepts a comma separated list of de-
vices. This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist
in /etc/lvm/devices/ and is managed with the lvmdevices(8) com-
mand. This overrides the lvm.conf(5) devices/devicesfile and
devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
-h|--help
Display help text.
--ignorelockingfailure
Allows a command to continue with read-only metadata operations
after locking failures.
--journal String
Record information in the systemd journal. This information is
in addition to information enabled by the lvm.conf log/journal
setting. command: record information about the command. out-
put: record the default command output. debug: record full com-
mand debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvm-
lockd(8) for more information.
--longhelp
Display long help text.
--mknodes
Also checks the LVM special files in /dev that are needed for
active LVs and creates any missing ones and removes unused ones.
--nohints
Do not use the hints file to locate devices for PVs. A command
may read more devices to find PVs when hints are not used. The
command will still perform standard hint file invalidation where
appropriate.
--nolocking
Disable locking. Use with caution, concurrent commands may pro-
duce incorrect results.
--notifydbus
Send a notification to D-Bus. The command will exit with an er-
ror if LVM is not built with support for D-Bus notification, or
if the notify_dbus config setting is disabled.
--profile String
An alias for --commandprofile or --metadataprofile, depending on
the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --ver-
bose. Repeat once to also suppress any prompts with answer
'no'.
--reportformat basic|json|json_std
Overrides current output format for reports which is defined
globally by the report/output_format setting in lvm.conf(5).
basic is the original format with columns and rows. If there is
more than one report per command, each report is prefixed with
the report name for identification. json produces report output
in JSON format. json_std produces report output in JSON format
which is more compliant with JSON standard. See lvmreport(7)
for more information.
-t|--test
Run in test mode. Commands will not update metadata. This is
implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to un-
usual error messages in multi-stage operations if a tool relies
on reading back metadata it believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the de-
tail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume
the answer yes. Use with extreme caution. (For automatic no,
see -qq.)
VARIABLES
String See the option description for information about the string con-
tent.
Size[UNIT]
Size is an input number that accepts an optional unit. Input
units are always treated as base two values, regardless of capi-
talization, e.g. 'k' and 'K' both refer to 1024. The default
input unit is specified by letter, followed by |UNIT. UNIT rep-
resents other possible input units: b|B is bytes, s|S is sectors
of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB,
p|P is PiB, e|E is EiB. (This should not be confused with the
output control --units, where capital letters mean multiple of
1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG
parameter.
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
lvmvdo(7), lvmautoactivation(7)
Red Hat, Inc. LVM TOOLS 2.03.22(2) (2023-08-02) VGSCAN(8)
Want to link to this manual page? Use this URL:
<http://star2.abcm.com/cgi-bin/bsdi-man?query=vgscan&sektion=8&manpath=>