OpenSuSE Man Pages
home |
help
- IO::Socket::IP (3)
- Family-neutral IP socket supporting both IPv4 and IPv6
- IO::Socket::IP (3pm)
- Family-neutral IP socket supporting both IPv4 and IPv6
- List::UtilsBy (3)
- higher-order list utility functions
- List::UtilsBy (3pm)
- higher-order list utility functions
- razor-check (1)
- Razor Filtering Agent
- razor-whitelist (5)
- Format for Vipul's Razor Whitelist
- bashbuiltins (1)
- bash built-in commands, see bash(1)
- .k5login (5)
- Kerberos V5 acl file for host access
- subdomain.conf (5)
- configuration file for fine-tuning the behavior of the...
- hosts.equiv (5)
- list of hosts and users that are granted "trusted" r c...
- nscd.conf (5)
- name service cache daemon configuration file
- 7z (1)
- A file archiver with highest compression ratio
- 7za (1)
- A file archiver with highest compression ratio
- 7zr (1)
- A file archiver with highest compression ratio
- decimal (n)
- General decimal arithmetic
- ABORT (7pg161)
- abort the current transaction
- APR (3)
- Perl Interface for Apache Portable Runtime (libapr and...
- APR (3pm)
- Perl Interface for Apache Portable Runtime (libapr and...
- APR::Error (3)
- Perl API for APR/Apache/mod_perl exceptions
- APR::Error (3pm)
- Perl API for APR/Apache/mod_perl exceptions
- APR::Status (3)
- Perl Interface to the APR_STATUS_IS_* macros
- APR::Status (3pm)
- Perl Interface to the APR_STATUS_IS_* macros
- APR::ThreadMutex (3)
- Perl API for APR thread mutexes
- APR::ThreadMutex (3pm)
- Perl API for APR thread mutexes
- APR::ThreadRWLock (3)
- Perl API for APR thread read/write locks
- APR::ThreadRWLock (3pm)
- Perl API for APR thread read/write locks
- as (1)
- the portable GNU assembler.
- Algorithm::Diff (3)
- Compute `intelligent' differences between two files / ...
- Algorithm::Diff (3pm)
- Compute `intelligent' differences between two files /...
- Algorithm::DiffOld (3)
- Compute `intelligent' differences between two files ...
- Algorithm::DiffOld (3pm)
- Compute `intelligent' differences between two file...
- Apache2::Access (3)
- A Perl API for Apache request object: Access, Authenti...
- Apache2::Access (3pm)
- A Perl API for Apache request object: Access, Authent...
- Apache2::Build (3)
- Methods for locating and parsing bits of Apache source...
- Apache2::Build (3pm)
- Methods for locating and parsing bits of Apache source...
- Apache2::CmdParms (3)
- Perl API for Apache command parameters object
- Apache2::CmdParms (3pm)
- Perl API for Apache command parameters object
- Apache2::Command (3)
- Perl API for accessing Apache module command information
- Apache2::Command (3pm)
- Perl API for accessing Apache module command informa...
- Apache2::Connection (3)
- Perl API for Apache connection object
- Apache2::Connection (3pm)
- Perl API for Apache connection object
- Apache2::ConnectionUtil (3)
- Perl API for Apache connection utils
- Apache2::ConnectionUtil (3pm)
- Perl API for Apache connection utils
- Apache2::Const (3)
- Perl Interface for Apache Constants
- Apache2::Const (3pm)
- Perl Interface for Apache Constants
- Apache2::Directive (3)
- Perl API for manipulating the Apache configuration tree
- Apache2::Directive (3pm)
- Perl API for manipulating the Apache configuration...
- Apache2::Filter (3)
- Perl API for Apache 2.0 Filtering
- Apache2::Filter (3pm)
- Perl API for Apache 2.0 Filtering
- Apache2::FilterRec (3)
- Perl API for manipulating the Apache filter record
- Apache2::FilterRec (3pm)
- Perl API for manipulating the Apache filter record
- Apache2::HookRun (3)
- Perl API for Invoking Apache HTTP phases
- Apache2::HookRun (3pm)
- Perl API for Invoking Apache HTTP phases
- Apache2::Log (3)
- Perl API for Apache Logging Methods
- Apache2::Log (3pm)
- Perl API for Apache Logging Methods
- Apache2::MPM (3)
- Perl API for accessing Apache MPM information
- Apache2::MPM (3pm)
- Perl API for accessing Apache MPM information
- Apache2::Module (3)
- Perl API for creating and working with Apache modules
- Apache2::Module (3pm)
- Perl API for creating and working with Apache modules
- Apache2::PerlSections (3)
- write Apache configuration files in Perl
- Apache2::PerlSections (3pm)
- write Apache configuration files in Perl
- Apache2::Process (3)
- Perl API for Apache process record
- Apache2::Process (3pm)
- Perl API for Apache process record
- Apache2::Reload (3)
- Reload Perl Modules when Changed on Disk
- Apache2::Reload (3pm)
- Reload Perl Modules when Changed on Disk
- Apache2::RequestIO (3)
- Perl API for Apache request record IO
- Apache2::RequestIO (3pm)
- Perl API for Apache request record IO
- Apache2::RequestRec (3)
- Perl API for Apache request record accessors
- Apache2::RequestRec (3pm)
- Perl API for Apache request record accessors
- Apache2::RequestUtil (3)
- Perl API for Apache request record utils
- Apache2::RequestUtil (3pm)
- Perl API for Apache request record utils
- Apache2::Resource (3)
- Limit resources used by httpd children
- Apache2::Resource (3pm)
- Limit resources used by httpd children
- Apache2::Response (3)
- Perl API for Apache HTTP request response methods
- Apache2::Response (3pm)
- Perl API for Apache HTTP request response methods
- Apache2::ServerRec (3)
- Perl API for Apache server record accessors
- Apache2::ServerRec (3pm)
- Perl API for Apache server record accessors
- Apache2::ServerUtil (3)
- Perl API for Apache server record utils
- Apache2::ServerUtil (3pm)
- Perl API for Apache server record utils
- Apache2::SizeLimit (3)
- Because size does matter.
- Apache2::SizeLimit (3pm)
- Because size does matter.
- Apache2::Status (3)
- Embedded interpreter status information
- Apache2::Status (3pm)
- Embedded interpreter status information
- Apache2::SubProcess (3)
- - Executing SubProcesses under mod_perl
- Apache2::SubProcess (3pm)
- - Executing SubProcesses under mod_perl
- Apache2::SubRequest (3)
- Perl API for Apache subrequests
- Apache2::SubRequest (3pm)
- Perl API for Apache subrequests
- Apache2::URI (3)
- Perl API for manipulating URIs
- Apache2::URI (3pm)
- Perl API for manipulating URIs
- Apache2::Util (3)
- Perl API for Misc Apache Utility functions
- Apache2::Util (3pm)
- Perl API for Misc Apache Utility functions
- Apache2::compat (3)
- - 1.0 backward compatibility functions deprecated in 2.0
- Apache2::compat (3pm)
- - 1.0 backward compatibility functions deprecated in 2.0
- Apache2::porting (3)
- - a helper module for mod_perl 1.0 to mod_perl 2.0 por...
- Apache2::porting (3pm)
- - a helper module for mod_perl 1.0 to mod_perl 2.0 p...
- Apache::Reload (3)
- Reload changed modules
- Apache::Reload (3pm)
- Reload changed modules
- Apache::SizeLimit (3)
- Because size does matter.
- Apache::SizeLimit (3pm)
- Because size does matter.
- Apache::SizeLimit::Core (3)
- Because size does matter.
- Apache::SizeLimit::Core (3pm)
- Because size does matter.
- Apache::Test (3)
- Test.pm wrapper with helpers for testing Apache
- Apache::Test (3pm)
- Test.pm wrapper with helpers for testing Apache
- Apache::TestConfig (3)
- - Test Configuration setup module
- Apache::TestConfig (3pm)
- - Test Configuration setup module
- Apache::TestHandler (3)
- a few response handlers and helpers
- Apache::TestHandler (3pm)
- a few response handlers and helpers
- Apache::TestMB (3)
- Subclass of Module::Build to support Apache::Test
- Apache::TestMB (3pm)
- Subclass of Module::Build to support Apache::Test
- Apache::TestMM (3)
- Provide MakeMaker Wrapper Methods
- Apache::TestMM (3pm)
- Provide MakeMaker Wrapper Methods
- Apache::TestReport (3)
- A parent class for generating bug/success reports
- Apache::TestReport (3pm)
- A parent class for generating bug/success reports
- Apache::TestRequest (3)
- Send requests to your Apache test server
- Apache::TestRequest (3pm)
- Send requests to your Apache test server
- Apache::TestRun (3)
- Run the test suite
- Apache::TestRun (3pm)
- Run the test suite
- Apache::TestRunPHP (3)
- configure and run a PHP-based test suite
- Apache::TestRunPHP (3pm)
- configure and run a PHP-based test suite
- Apache::TestRunPerl (3)
- Run mod_perl-requiring Test Suite
- Apache::TestRunPerl (3pm)
- Run mod_perl-requiring Test Suite
- Apache::TestSmoke (3)
- Special Tests Sequence Failure Finder
- Apache::TestSmoke (3pm)
- Special Tests Sequence Failure Finder
- Apache::TestTrace (3)
- Helper output generation functions
- Apache::TestTrace (3pm)
- Helper output generation functions
- Apache::TestUtil (3)
- Utility functions for writing tests
- Apache::TestUtil (3pm)
- Utility functions for writing tests
- App::Cpan (3)
- easily interact with CPAN from the command line
- App::Cpan (3pm)
- easily interact with CPAN from the command line
- App::Prove (3)
- Implements the "prove" command.
- App::Prove (3pm)
- Implements the "prove" command.
- App::Prove::State (3)
- State storage for the "prove" command.
- App::Prove::State (3pm)
- State storage for the "prove" command.
- apparmor (7)
- kernel enhancement to confine programs to a limited se...
- Archive::Tar (3)
- module for manipulations of tar archives
- Archive::Tar (3pm)
- module for manipulations of tar archives
- Archive::Tar::File (3)
- a subclass for in-memory extracted file from Archive...
- Archive::Tar::File (3pm)
- a subclass for in-memory extracted file from Archi...
- Archive::Zip (3)
- Provide an interface to ZIP archive files.
- Archive::Zip (3pm)
- Provide an interface to ZIP archive files.
- Archive::Zip::FAQ (3)
- Answers to a few frequently asked questions about Arc...
- Archive::Zip::FAQ (3pm)
- Answers to a few frequently asked questions about A...
- Archive::Zip::MemberRead (3)
- A wrapper that lets you read Zip archive membe...
- Archive::Zip::MemberRead (3pm)
- A wrapper that lets you read Zip archive mem...
- Archive::Zip::Tree (3)
- (DEPRECATED) methods for adding/extracting trees usi...
- Archive::Zip::Tree (3pm)
- (DEPRECATED) methods for adding/extracting trees u...
- XML::XPath::Node::Attribute (3)
- a single attribute
- XML::XPath::Node::Attribute (3pm)
- a single attribute
- Authen::SASL (3)
- SASL Authentication framework
- Authen::SASL (3pm)
- SASL Authentication framework
- Authen::SASL::Perl (3)
- - Perl implementation of the SASL Authentication fra...
- Authen::SASL::Perl (3pm)
- - Perl implementation of the SASL Authentication f...
- Authen::SASL::Perl::ANONYMOUS (3)
- Anonymous Authentication class
- Authen::SASL::Perl::ANONYMOUS (3pm)
- Anonymous Authentication class
- Authen::SASL::Perl::CRAM_MD5 (3)
- CRAM MD5 Authentication class
- Authen::SASL::Perl::CRAM_MD5 (3pm)
- CRAM MD5 Authentication class
- Authen::SASL::Perl::DIGEST_MD5 (3)
- Digest MD5 Authentication class
- Authen::SASL::Perl::DIGEST_MD5 (3pm)
- Digest MD5 Authentication class
- Authen::SASL::Perl::EXTERNAL (3)
- External Authentication class
- Authen::SASL::Perl::EXTERNAL (3pm)
- External Authentication class
- Authen::SASL::Perl::GSSAPI (3)
- GSSAPI (Kerberosv5) Authentication class
- Authen::SASL::Perl::GSSAPI (3pm)
- GSSAPI (Kerberosv5) Authentication class
- Authen::SASL::Perl::LOGIN (3)
- Login Authentication class
- Authen::SASL::Perl::LOGIN (3pm)
- Login Authentication class
- Authen::SASL::Perl::PLAIN (3)
- Plain Login Authentication class
- Authen::SASL::Perl::PLAIN (3pm)
- Plain Login Authentication class
- B::Hooks::EndOfScope (3)
- Execute code after a scope finished compilation
- B::Hooks::EndOfScope (3pm)
- Execute code after a scope finished compilation
- B::Hooks::EndOfScope::PP (3)
- Execute code after a scope finished compilatio...
- B::Hooks::EndOfScope::PP (3pm)
- Execute code after a scope finished compilat...
- B::Hooks::EndOfScope::XS (3)
- Execute code after a scope finished compilatio...
- B::Hooks::EndOfScope::XS (3pm)
- Execute code after a scope finished compilat...
- B::Hooks::OP::Check (3)
- Wrap OP check callbacks
- B::Hooks::OP::Check (3pm)
- Wrap OP check callbacks
- BC (3ncurses)
- direct curses interface to the terminfo capability dat...
- baobab (1)
- A graphical tool to analyze disk usage
- Bundle::Apache2 (3)
- Install Apache mod_perl2 and related modules
- Bundle::Apache2 (3pm)
- Install Apache mod_perl2 and related modules
- Bundle::ApacheTest (3)
- A bundle to install all Apache-Test related modules
- Bundle::ApacheTest (3pm)
- A bundle to install all Apache-Test related modules
- COMMENT (7pg161)
- define or change the comment of an object
- CPAN::API::HOWTO (3)
- a recipe book for programming with CPAN.pm
- CPAN::API::HOWTO (3pm)
- a recipe book for programming with CPAN.pm
- CPAN::Distroprefs (3)
- - read and match distroprefs
- CPAN::Distroprefs (3pm)
- - read and match distroprefs
- CPAN::HandleConfig (3)
- internal configuration handling for CPAN.pm
- CPAN::HandleConfig (3pm)
- internal configuration handling for CPAN.pm
- CPAN::Meta (3)
- the distribution metadata for a CPAN dist
- CPAN::Meta (3pm)
- the distribution metadata for a CPAN dist
- CPAN::Meta::Check (3)
- Verify requirements in a CPAN::Meta object
- CPAN::Meta::Check (3pm)
- Verify requirements in a CPAN::Meta object
- CPAN::Meta::History (3)
- history of CPAN Meta Spec changes
- CPAN::Meta::History (3pm)
- history of CPAN Meta Spec changes
- CPAN::Meta::History::Meta_1_0 (3)
- Version 1.0 metadata specification for ME...
- CPAN::Meta::History::Meta_1_0 (3pm)
- Version 1.0 metadata specification for ...
- CPAN::Meta::History::Meta_1_1 (3)
- Version 1.1 metadata specification for ME...
- CPAN::Meta::History::Meta_1_1 (3pm)
- Version 1.1 metadata specification for ...
- CPAN::Meta::History::Meta_1_2 (3)
- Version 1.2 metadata specification for ME...
- CPAN::Meta::History::Meta_1_2 (3pm)
- Version 1.2 metadata specification for ...
- CPAN::Meta::History::Meta_1_3 (3)
- Version 1.3 metadata specification for ME...
- CPAN::Meta::History::Meta_1_3 (3pm)
- Version 1.3 metadata specification for ...
- CPAN::Meta::History::Meta_1_4 (3)
- Version 1.4 metadata specification for ME...
- CPAN::Meta::History::Meta_1_4 (3pm)
- Version 1.4 metadata specification for ...
- CPAN::Meta::Prereqs (3)
- a set of distribution prerequisites by phase and type
- CPAN::Meta::Prereqs (3pm)
- a set of distribution prerequisites by phase and ...
- CPAN::Nox (3)
- Wrapper around CPAN.pm without using any XS module
- CPAN::Nox (3pm)
- Wrapper around CPAN.pm without using any XS module
- CPAN::Plugin (3)
- Base class for CPAN shell extensions
- CPAN::Plugin (3pm)
- Base class for CPAN shell extensions
- CPAN::Tarzip (3)
- internal handling of tar archives for CPAN.pm
- CPAN::Tarzip (3pm)
- internal handling of tar archives for CPAN.pm
- cvsps (1)
- create patchset information from CVS
- checkbot (1)
- WWW Link Verifier. Modified for the Novell Webconsole
- pidofproc (8)
- Checks for a process by full path name
- Class::Data::Inheritable (3)
- Inheritable, overridable class data
- Class::Data::Inheritable (3pm)
- Inheritable, overridable class data
- Class::Method::Modifiers (3)
- Provides Moose-like method modifiers
- Class::Method::Modifiers (3pm)
- Provides Moose-like method modifiers
- Class::XSAccessor (3)
- Generate fast XS accessors without runtime compilation
- Class::XSAccessor (3pm)
- Generate fast XS accessors without runtime compilation
- Class::XSAccessor::Array (3)
- Generate fast XS accessors without runtime com...
- Class::XSAccessor::Array (3pm)
- Generate fast XS accessors without runtime c...
- Class::XSAccessor::Heavy (3)
- Guts you don't care about
- Class::XSAccessor::Heavy (3pm)
- Guts you don't care about
- XML::XPath::Node::Comment (3)
- an XML comment: <!--comment-->
- XML::XPath::Node::Comment (3pm)
- an XML comment: <!--comment-->
- Config::Tiny (3)
- Read/Write .ini style files with as little code as pos...
- Config::Tiny (3pm)
- Read/Write .ini style files with as little code as pos...
- Convert::BinHex (3)
- extract data from Macintosh BinHex files
- Convert::BinHex (3pm)
- extract data from Macintosh BinHex files
- Crypt::OpenSSL::RSA (3)
- RSA encoding and decoding, using the openSSL libraries
- DB (3)
- programmatic interface to the Perl debugging API
- DBD::File::HowTo (3)
- Guide to create DBD::File based driver
- DBD::File::HowTo (3pm)
- Guide to create DBD::File based driver
- DBD::File::Roadmap (3)
- Planned Enhancements for DBD::File and pure Perl DBD's
- DBD::File::Roadmap (3pm)
- Planned Enhancements for DBD::File and pure Perl D...
- DBD::Gofer (3)
- A stateless-proxy driver for communicating with a remo...
- DBD::Gofer (3pm)
- A stateless-proxy driver for communicating with a remo...
- DBD::Gofer::Policy::classic (3)
- The 'classic' policy for DBD::Gofer
- DBD::Gofer::Policy::classic (3pm)
- The 'classic' policy for DBD::Gofer
- DBD::Gofer::Policy::pedantic (3)
- The 'pedantic' policy for DBD::Gofer
- DBD::Gofer::Policy::pedantic (3pm)
- The 'pedantic' policy for DBD::Gofer
- DBD::Gofer::Policy::rush (3)
- The 'rush' policy for DBD::Gofer
- DBD::Gofer::Policy::rush (3pm)
- The 'rush' policy for DBD::Gofer
- DBD::Proxy (3)
- A proxy driver for the DBI
- DBD::Proxy (3pm)
- A proxy driver for the DBI
- DBD::SQLite::Cookbook (3)
- The DBD::SQLite Cookbook
- DBD::SQLite::Cookbook (3pm)
- The DBD::SQLite Cookbook
- DBD::SQLite::Fulltext_search (3)
- Using fulltext searches with DBD::SQLite
- DBD::SQLite::Fulltext_search (3pm)
- Using fulltext searches with DBD::SQLite
- DBD::SQLite::VirtualTable::PerlData (3)
- - virtual table hooked to Perl data
- DBD::SQLite::VirtualTable::PerlData (3pm)
- - virtual table hooked to Perl data
- DBD::Sponge (3)
- Create a DBI statement handle from Perl data
- DBD::Sponge (3pm)
- Create a DBI statement handle from Perl data
- DBI::DBD::Metadata (3)
- Generate the code and data for some DBI metadata met...
- DBI::DBD::Metadata (3pm)
- Generate the code and data for some DBI metadata m...
- DBI::DBD::SqlEngine (3)
- Base class for DBI drivers without their own SQL en...
- DBI::DBD::SqlEngine (3pm)
- Base class for DBI drivers without their own SQL ...
- DBI::DBD::SqlEngine::HowTo (3)
- Guide to create DBI::DBD::SqlEngine based dr...
- DBI::DBD::SqlEngine::HowTo (3pm)
- Guide to create DBI::DBD::SqlEngine based ...
- DBI::Profile (3)
- Performance profiling and benchmarking for the DBI
- DBI::Profile (3pm)
- Performance profiling and benchmarking for the DBI
- DBI::ProfileDumper::Apache (3)
- capture DBI profiling data from Apache/mod_perl
- DBI::ProfileDumper::Apache (3pm)
- capture DBI profiling data from Apache/mod...
- DBI::ProfileSubs (3)
- Subroutines for dynamic profile Path
- DBI::ProfileSubs (3pm)
- Subroutines for dynamic profile Path
- DBI::ProxyServer (3)
- a server for the DBD::Proxy driver
- DBI::ProxyServer (3pm)
- a server for the DBD::Proxy driver
- DBI::Util::CacheMemory (3)
- a very fast but very minimal subset of Cache::Me...
- DBI::Util::CacheMemory (3pm)
- a very fast but very minimal subset of Cache::...
- DBIx::Simple::Examples (3)
- Examples of how to use DBIx::Simple
- DBIx::Simple::Examples (3pm)
- Examples of how to use DBIx::Simple
- DDP (3)
- Data::Printer shortcut for faster debugging
- DDP (3pm)
- Data::Printer shortcut for faster debugging
- Data::Grove::Visitor (3)
- add visitor/callback methods to Data::Grove objects
- Data::Grove::Visitor (3pm)
- add visitor/callback methods to Data::Grove objects
- Data::Printer::Filter::Digest (3)
- pretty-printing MD5, SHA and many other d...
- Data::Printer::Filter::Digest (3pm)
- pretty-printing MD5, SHA and many other...
- Data::Printer::Filter::Web (3)
- pretty-printing of HTTP/JSON/LWP/Plack/Dance...
- Data::Printer::Filter::Web (3pm)
- pretty-printing of HTTP/JSON/LWP/Plack/Dan...
- Data::Printer::Profile (3)
- customize your Data::Printer with code
- Data::Printer::Profile (3pm)
- customize your Data::Printer with code
- Data::Printer::Theme (3)
- create your own color themes for DDP!
- Data::Printer::Theme (3pm)
- create your own color themes for DDP!
- Data::Printer::Theme::Classic (3)
- Classic DDP color theme for nostalgic users
- Data::Printer::Theme::Classic (3pm)
- Classic DDP color theme for nostalgic u...
- Data::Printer::Theme::Material (3)
- Material theme for DDP
- Data::Printer::Theme::Material (3pm)
- Material theme for DDP
- Data::Printer::Theme::Monokai (3)
- Monokai theme for DDP
- Data::Printer::Theme::Monokai (3pm)
- Monokai theme for DDP
- Data::Printer::Theme::Solarized (3)
- Solarized theme for DDP
- Data::Printer::Theme::Solarized (3pm)
- Solarized theme for DDP
- Data::Validate::IP (3)
- IPv4 and IPv6 validation methods
- Data::Validate::IP (3pm)
- IPv4 and IPv6 validation methods
- Date::Language::Hungarian (3)
- Magyar format for Date::Format
- Date::Language::Hungarian (3pm)
- Magyar format for Date::Format
- Date::Manip::Base (3)
- Base methods for date manipulation
- Date::Manip::Base (3pm)
- Base methods for date manipulation
- Date::Manip::Changes5 (3)
- changes in Date::Manip 5.xx
- Date::Manip::Changes5 (3pm)
- changes in Date::Manip 5.xx
- Date::Manip::Changes5to6 (3)
- describes differences between 5.xx and 6.00
- Date::Manip::Changes5to6 (3pm)
- describes differences between 5.xx and 6.00
- Date::Manip::Changes6 (3)
- changes in Date::Manip 6.xx
- Date::Manip::Changes6 (3pm)
- changes in Date::Manip 6.xx
- Date::Manip::Date (3)
- Methods for working with dates
- Date::Manip::Date (3pm)
- Methods for working with dates
- Date::Manip::Delta (3)
- Methods for working with deltas
- Date::Manip::Delta (3pm)
- Methods for working with deltas
- Date::Manip::Examples (3)
- examples of how to use Date::Manip
- Date::Manip::Examples (3pm)
- examples of how to use Date::Manip
- Date::Manip::Holidays (3)
- describes holidays and events
- Date::Manip::Holidays (3pm)
- describes holidays and events
- Date::Manip::Lang::danish (3)
- Danish language support.
- Date::Manip::Lang::danish (3pm)
- Danish language support.
- Date::Manip::Lang::dutch (3)
- Dutch language support.
- Date::Manip::Lang::dutch (3pm)
- Dutch language support.
- Date::Manip::Lang::english (3)
- English language support.
- Date::Manip::Lang::english (3pm)
- English language support.
- Date::Manip::Lang::finnish (3)
- Finnish language support.
- Date::Manip::Lang::finnish (3pm)
- Finnish language support.
- Date::Manip::Lang::french (3)
- French language support.
- Date::Manip::Lang::french (3pm)
- French language support.
- Date::Manip::Lang::polish (3)
- Polish language support.
- Date::Manip::Lang::polish (3pm)
- Polish language support.
- Date::Manip::Lang::spanish (3)
- Spanish language support.
- Date::Manip::Lang::spanish (3pm)
- Spanish language support.
- Date::Manip::Lang::swedish (3)
- Swedish language support.
- Date::Manip::Lang::swedish (3pm)
- Swedish language support.
- Date::Manip::Lang::turkish (3)
- Turkish language support.
- Date::Manip::Lang::turkish (3pm)
- Turkish language support.
- Date::Manip::Migration5to6 (3)
- how to upgrade from 5.xx to 6.00
- Date::Manip::Migration5to6 (3pm)
- how to upgrade from 5.xx to 6.00
- Date::Manip::Objects (3)
- A description of the various Date::Manip objects
- Date::Manip::Objects (3pm)
- A description of the various Date::Manip objects
- Date::Manip::Recur (3)
- methods for working with recurring events
- Date::Manip::Recur (3pm)
- methods for working with recurring events
- Date::Manip::TZ (3)
- an interface to the time zone data
- Date::Manip::TZ (3pm)
- an interface to the time zone data
- Date::Manip::TZ_Base (3)
- Methods common to the TZ and Base classes
- Date::Manip::TZ_Base (3pm)
- Methods common to the TZ and Base classes
- Date::Manip::TZdata (3)
- - Internal module for working with the tzdata files
- Date::Manip::TZdata (3pm)
- - Internal module for working with the tzdata files
- DateTime::Duration (3)
- Duration objects for date math
- DateTime::Duration (3pm)
- Duration objects for date math
- DateTime::Locale::af (3)
- Locale data examples for the Afrikaans (af) locale
- DateTime::Locale::af (3pm)
- Locale data examples for the Afrikaans (af) locale
- DateTime::Locale::af_NA (3)
- Locale data examples for the Afrikaans Namibia ...
- DateTime::Locale::af_NA (3pm)
- Locale data examples for the Afrikaans Namibi...
- DateTime::Locale::af_ZA (3)
- Locale data examples for the Afrikaans South Af...
- DateTime::Locale::af_ZA (3pm)
- Locale data examples for the Afrikaans South ...
- DateTime::Locale::agq (3)
- Locale data examples for the Aghem (agq) locale
- DateTime::Locale::agq (3pm)
- Locale data examples for the Aghem (agq) locale
- DateTime::Locale::agq_CM (3)
- Locale data examples for the Aghem Cameroon (a...
- DateTime::Locale::agq_CM (3pm)
- Locale data examples for the Aghem Cameroon ...
- DateTime::Locale::ak (3)
- Locale data examples for the Akan (ak) locale
- DateTime::Locale::ak (3pm)
- Locale data examples for the Akan (ak) locale
- DateTime::Locale::ak_GH (3)
- Locale data examples for the Akan Ghana (ak-GH)...
- DateTime::Locale::ak_GH (3pm)
- Locale data examples for the Akan Ghana (ak-G...
- DateTime::Locale::am (3)
- Locale data examples for the Amharic (am) locale
- DateTime::Locale::am (3pm)
- Locale data examples for the Amharic (am) locale
- DateTime::Locale::am_ET (3)
- Locale data examples for the Amharic Ethiopia (...
- DateTime::Locale::am_ET (3pm)
- Locale data examples for the Amharic Ethiopia...
- DateTime::Locale::ann (3)
- Locale data examples for the Obolo (ann) locale
- DateTime::Locale::ann (3pm)
- Locale data examples for the Obolo (ann) locale
- DateTime::Locale::ann_NG (3)
- Locale data examples for the Obolo Nigeria (an...
- DateTime::Locale::ann_NG (3pm)
- Locale data examples for the Obolo Nigeria (...
- DateTime::Locale::ar (3)
- Locale data examples for the Arabic (ar) locale
- DateTime::Locale::ar (3pm)
- Locale data examples for the Arabic (ar) locale
- DateTime::Locale::ar_001 (3)
- Locale data examples for the Arabic world (ar-...
- DateTime::Locale::ar_001 (3pm)
- Locale data examples for the Arabic world (a...
- DateTime::Locale::ar_AE (3)
- Locale data examples for the Arabic United Arab...
- DateTime::Locale::ar_AE (3pm)
- Locale data examples for the Arabic United Ar...
- DateTime::Locale::ar_BH (3)
- Locale data examples for the Arabic Bahrain (ar...
- DateTime::Locale::ar_BH (3pm)
- Locale data examples for the Arabic Bahrain (...
- DateTime::Locale::ar_DJ (3)
- Locale data examples for the Arabic Djibouti (a...
- DateTime::Locale::ar_DJ (3pm)
- Locale data examples for the Arabic Djibouti ...
- DateTime::Locale::ar_DZ (3)
- Locale data examples for the Arabic Algeria (ar...
- DateTime::Locale::ar_DZ (3pm)
- Locale data examples for the Arabic Algeria (...
- DateTime::Locale::ar_EG (3)
- Locale data examples for the Arabic Egypt (ar-E...
- DateTime::Locale::ar_EG (3pm)
- Locale data examples for the Arabic Egypt (ar...
- DateTime::Locale::ar_EH (3)
- Locale data examples for the Arabic Western Sah...
- DateTime::Locale::ar_EH (3pm)
- Locale data examples for the Arabic Western S...
- DateTime::Locale::ar_ER (3)
- Locale data examples for the Arabic Eritrea (ar...
- DateTime::Locale::ar_ER (3pm)
- Locale data examples for the Arabic Eritrea (...
- DateTime::Locale::ar_IL (3)
- Locale data examples for the Arabic Israel (ar-...
- DateTime::Locale::ar_IL (3pm)
- Locale data examples for the Arabic Israel (a...
- DateTime::Locale::ar_IQ (3)
- Locale data examples for the Arabic Iraq (ar-IQ...
- DateTime::Locale::ar_IQ (3pm)
- Locale data examples for the Arabic Iraq (ar-...
- DateTime::Locale::ar_JO (3)
- Locale data examples for the Arabic Jordan (ar-...
- DateTime::Locale::ar_JO (3pm)
- Locale data examples for the Arabic Jordan (a...
- DateTime::Locale::ar_KM (3)
- Locale data examples for the Arabic Comoros (ar...
- DateTime::Locale::ar_KM (3pm)
- Locale data examples for the Arabic Comoros (...
- DateTime::Locale::ar_KW (3)
- Locale data examples for the Arabic Kuwait (ar-...
- DateTime::Locale::ar_KW (3pm)
- Locale data examples for the Arabic Kuwait (a...
- DateTime::Locale::ar_LB (3)
- Locale data examples for the Arabic Lebanon (ar...
- DateTime::Locale::ar_LB (3pm)
- Locale data examples for the Arabic Lebanon (...
- DateTime::Locale::ar_LY (3)
- Locale data examples for the Arabic Libya (ar-L...
- DateTime::Locale::ar_LY (3pm)
- Locale data examples for the Arabic Libya (ar...
- DateTime::Locale::ar_MA (3)
- Locale data examples for the Arabic Morocco (ar...
- DateTime::Locale::ar_MA (3pm)
- Locale data examples for the Arabic Morocco (...
- DateTime::Locale::ar_MR (3)
- Locale data examples for the Arabic Mauritania ...
- DateTime::Locale::ar_MR (3pm)
- Locale data examples for the Arabic Mauritani...
- DateTime::Locale::ar_OM (3)
- Locale data examples for the Arabic Oman (ar-OM...
- DateTime::Locale::ar_OM (3pm)
- Locale data examples for the Arabic Oman (ar-...
- DateTime::Locale::ar_PS (3)
- Locale data examples for the Arabic Palestinian...
- DateTime::Locale::ar_PS (3pm)
- Locale data examples for the Arabic Palestini...
- DateTime::Locale::ar_QA (3)
- Locale data examples for the Arabic Qatar (ar-Q...
- DateTime::Locale::ar_QA (3pm)
- Locale data examples for the Arabic Qatar (ar...
- DateTime::Locale::ar_SA (3)
- Locale data examples for the Arabic Saudi Arabi...
- DateTime::Locale::ar_SA (3pm)
- Locale data examples for the Arabic Saudi Ara...
- DateTime::Locale::ar_SD (3)
- Locale data examples for the Arabic Sudan (ar-S...
- DateTime::Locale::ar_SD (3pm)
- Locale data examples for the Arabic Sudan (ar...
- DateTime::Locale::ar_SO (3)
- Locale data examples for the Arabic Somalia (ar...
- DateTime::Locale::ar_SO (3pm)
- Locale data examples for the Arabic Somalia (...
- DateTime::Locale::ar_SS (3)
- Locale data examples for the Arabic South Sudan...
- DateTime::Locale::ar_SS (3pm)
- Locale data examples for the Arabic South Sud...
- DateTime::Locale::ar_SY (3)
- Locale data examples for the Arabic Syria (ar-S...
- DateTime::Locale::ar_SY (3pm)
- Locale data examples for the Arabic Syria (ar...
- DateTime::Locale::ar_TD (3)
- Locale data examples for the Arabic Chad (ar-TD...
- DateTime::Locale::ar_TD (3pm)
- Locale data examples for the Arabic Chad (ar-...
- DateTime::Locale::ar_TN (3)
- Locale data examples for the Arabic Tunisia (ar...
- DateTime::Locale::ar_TN (3pm)
- Locale data examples for the Arabic Tunisia (...
- DateTime::Locale::ar_YE (3)
- Locale data examples for the Arabic Yemen (ar-Y...
- DateTime::Locale::ar_YE (3pm)
- Locale data examples for the Arabic Yemen (ar...
- DateTime::Locale::as (3)
- Locale data examples for the Assamese (as) locale
- DateTime::Locale::as (3pm)
- Locale data examples for the Assamese (as) locale
- DateTime::Locale::as_IN (3)
- Locale data examples for the Assamese India (as...
- DateTime::Locale::as_IN (3pm)
- Locale data examples for the Assamese India (...
- DateTime::Locale::asa (3)
- Locale data examples for the Asu (asa) locale
- DateTime::Locale::asa (3pm)
- Locale data examples for the Asu (asa) locale
- DateTime::Locale::asa_TZ (3)
- Locale data examples for the Asu Tanzania (asa...
- DateTime::Locale::asa_TZ (3pm)
- Locale data examples for the Asu Tanzania (a...
- DateTime::Locale::ast (3)
- Locale data examples for the Asturian (ast) locale
- DateTime::Locale::ast (3pm)
- Locale data examples for the Asturian (ast) locale
- DateTime::Locale::ast_ES (3)
- Locale data examples for the Asturian Spain (a...
- DateTime::Locale::ast_ES (3pm)
- Locale data examples for the Asturian Spain ...
- DateTime::Locale::az (3)
- Locale data examples for the Azerbaijani (az) locale
- DateTime::Locale::az (3pm)
- Locale data examples for the Azerbaijani (az) lo...
- DateTime::Locale::az_Cyrl (3)
- Locale data examples for the Azerbaijani Cyri...
- DateTime::Locale::az_Cyrl (3pm)
- Locale data examples for the Azerbaijani Cy...
- DateTime::Locale::az_Cyrl_AZ (3)
- Locale data examples for the Azerbaijani A...
- DateTime::Locale::az_Cyrl_AZ (3pm)
- Locale data examples for the Azerbaijani...
- DateTime::Locale::az_Latn (3)
- Locale data examples for the Azerbaijani Lati...
- DateTime::Locale::az_Latn (3pm)
- Locale data examples for the Azerbaijani La...
- DateTime::Locale::az_Latn_AZ (3)
- Locale data examples for the Azerbaijani A...
- DateTime::Locale::az_Latn_AZ (3pm)
- Locale data examples for the Azerbaijani...
- DateTime::Locale::bas (3)
- Locale data examples for the Basaa (bas) locale
- DateTime::Locale::bas (3pm)
- Locale data examples for the Basaa (bas) locale
- DateTime::Locale::bas_CM (3)
- Locale data examples for the Basaa Cameroon (b...
- DateTime::Locale::bas_CM (3pm)
- Locale data examples for the Basaa Cameroon ...
- DateTime::Locale::be (3)
- Locale data examples for the Belarusian (be) locale
- DateTime::Locale::be (3pm)
- Locale data examples for the Belarusian (be) locale
- DateTime::Locale::be_BY (3)
- Locale data examples for the Belarusian Belarus...
- DateTime::Locale::be_BY (3pm)
- Locale data examples for the Belarusian Belar...
- DateTime::Locale::be_tarask (3)
- Locale data examples for the Belarusian Tar...
- DateTime::Locale::be_tarask (3pm)
- Locale data examples for the Belarusian T...
- DateTime::Locale::bem (3)
- Locale data examples for the Bemba (bem) locale
- DateTime::Locale::bem (3pm)
- Locale data examples for the Bemba (bem) locale
- DateTime::Locale::bem_ZM (3)
- Locale data examples for the Bemba Zambia (bem...
- DateTime::Locale::bem_ZM (3pm)
- Locale data examples for the Bemba Zambia (b...
- DateTime::Locale::bez (3)
- Locale data examples for the Bena (bez) locale
- DateTime::Locale::bez (3pm)
- Locale data examples for the Bena (bez) locale
- DateTime::Locale::bez_TZ (3)
- Locale data examples for the Bena Tanzania (be...
- DateTime::Locale::bez_TZ (3pm)
- Locale data examples for the Bena Tanzania (...
- DateTime::Locale::bg (3)
- Locale data examples for the Bulgarian (bg) locale
- DateTime::Locale::bg (3pm)
- Locale data examples for the Bulgarian (bg) locale
- DateTime::Locale::bg_BG (3)
- Locale data examples for the Bulgarian Bulgaria...
- DateTime::Locale::bg_BG (3pm)
- Locale data examples for the Bulgarian Bulgar...
- DateTime::Locale::bgc (3)
- Locale data examples for the Haryanvi (bgc) locale
- DateTime::Locale::bgc (3pm)
- Locale data examples for the Haryanvi (bgc) locale
- DateTime::Locale::bgc_IN (3)
- Locale data examples for the Haryanvi India (b...
- DateTime::Locale::bgc_IN (3pm)
- Locale data examples for the Haryanvi India ...
- DateTime::Locale::bho (3)
- Locale data examples for the Bhojpuri (bho) locale
- DateTime::Locale::bho (3pm)
- Locale data examples for the Bhojpuri (bho) locale
- DateTime::Locale::bho_IN (3)
- Locale data examples for the Bhojpuri India (b...
- DateTime::Locale::bho_IN (3pm)
- Locale data examples for the Bhojpuri India ...
- DateTime::Locale::bm (3)
- Locale data examples for the Bambara (bm) locale
- DateTime::Locale::bm (3pm)
- Locale data examples for the Bambara (bm) locale
- DateTime::Locale::bm_ML (3)
- Locale data examples for the Bambara Mali (bm-M...
- DateTime::Locale::bm_ML (3pm)
- Locale data examples for the Bambara Mali (bm...
- DateTime::Locale::bn (3)
- Locale data examples for the Bangla (bn) locale
- DateTime::Locale::bn (3pm)
- Locale data examples for the Bangla (bn) locale
- DateTime::Locale::bn_BD (3)
- Locale data examples for the Bangla Bangladesh ...
- DateTime::Locale::bn_BD (3pm)
- Locale data examples for the Bangla Banglades...
- DateTime::Locale::bn_IN (3)
- Locale data examples for the Bangla India (bn-I...
- DateTime::Locale::bn_IN (3pm)
- Locale data examples for the Bangla India (bn...
- DateTime::Locale::bo (3)
- Locale data examples for the Tibetan (bo) locale
- DateTime::Locale::bo (3pm)
- Locale data examples for the Tibetan (bo) locale
- DateTime::Locale::bo_CN (3)
- Locale data examples for the Tibetan China (bo-...
- DateTime::Locale::bo_CN (3pm)
- Locale data examples for the Tibetan China (b...
- DateTime::Locale::bo_IN (3)
- Locale data examples for the Tibetan India (bo-...
- DateTime::Locale::bo_IN (3pm)
- Locale data examples for the Tibetan India (b...
- DateTime::Locale::br (3)
- Locale data examples for the Breton (br) locale
- DateTime::Locale::br (3pm)
- Locale data examples for the Breton (br) locale
- DateTime::Locale::br_FR (3)
- Locale data examples for the Breton France (br-...
- DateTime::Locale::br_FR (3pm)
- Locale data examples for the Breton France (b...
- DateTime::Locale::brx (3)
- Locale data examples for the Bodo (brx) locale
- DateTime::Locale::brx (3pm)
- Locale data examples for the Bodo (brx) locale
- DateTime::Locale::brx_IN (3)
- Locale data examples for the Bodo India (brx-I...
- DateTime::Locale::brx_IN (3pm)
- Locale data examples for the Bodo India (brx...
- DateTime::Locale::bs (3)
- Locale data examples for the Bosnian (bs) locale
- DateTime::Locale::bs (3pm)
- Locale data examples for the Bosnian (bs) locale
- DateTime::Locale::bs_Cyrl (3)
- Locale data examples for the Bosnian Cyrillic...
- DateTime::Locale::bs_Cyrl (3pm)
- Locale data examples for the Bosnian Cyrill...
- DateTime::Locale::bs_Cyrl_BA (3)
- Locale data examples for the Bosnian Bosni...
- DateTime::Locale::bs_Cyrl_BA (3pm)
- Locale data examples for the Bosnian Bos...
- DateTime::Locale::bs_Latn (3)
- Locale data examples for the Bosnian Latin (b...
- DateTime::Locale::bs_Latn (3pm)
- Locale data examples for the Bosnian Latin ...
- DateTime::Locale::bs_Latn_BA (3)
- Locale data examples for the Bosnian Bosni...
- DateTime::Locale::bs_Latn_BA (3pm)
- Locale data examples for the Bosnian Bos...
- DateTime::Locale::ca (3)
- Locale data examples for the Catalan (ca) locale
- DateTime::Locale::ca (3pm)
- Locale data examples for the Catalan (ca) locale
- DateTime::Locale::ca_AD (3)
- Locale data examples for the Catalan Andorra (c...
- DateTime::Locale::ca_AD (3pm)
- Locale data examples for the Catalan Andorra ...
- DateTime::Locale::ca_ES (3)
- Locale data examples for the Catalan Spain (ca-...
- DateTime::Locale::ca_ES (3pm)
- Locale data examples for the Catalan Spain (c...
- DateTime::Locale::ca_ES_valencia (3)
- Locale data examples for the Catalan S...
- DateTime::Locale::ca_ES_valencia (3pm)
- Locale data examples for the Catalan...
- DateTime::Locale::ca_FR (3)
- Locale data examples for the Catalan France (ca...
- DateTime::Locale::ca_FR (3pm)
- Locale data examples for the Catalan France (...
- DateTime::Locale::ca_IT (3)
- Locale data examples for the Catalan Italy (ca-...
- DateTime::Locale::ca_IT (3pm)
- Locale data examples for the Catalan Italy (c...
- DateTime::Locale::ccp (3)
- Locale data examples for the Chakma (ccp) locale
- DateTime::Locale::ccp (3pm)
- Locale data examples for the Chakma (ccp) locale
- DateTime::Locale::ccp_BD (3)
- Locale data examples for the Chakma Bangladesh...
- DateTime::Locale::ccp_BD (3pm)
- Locale data examples for the Chakma Banglade...
- DateTime::Locale::ccp_IN (3)
- Locale data examples for the Chakma India (ccp...
- DateTime::Locale::ccp_IN (3pm)
- Locale data examples for the Chakma India (c...
- DateTime::Locale::ce (3)
- Locale data examples for the Chechen (ce) locale
- DateTime::Locale::ce (3pm)
- Locale data examples for the Chechen (ce) locale
- DateTime::Locale::ce_RU (3)
- Locale data examples for the Chechen Russia (ce...
- DateTime::Locale::ce_RU (3pm)
- Locale data examples for the Chechen Russia (...
- DateTime::Locale::ceb (3)
- Locale data examples for the Cebuano (ceb) locale
- DateTime::Locale::ceb (3pm)
- Locale data examples for the Cebuano (ceb) locale
- DateTime::Locale::ceb_PH (3)
- Locale data examples for the Cebuano Philippin...
- DateTime::Locale::ceb_PH (3pm)
- Locale data examples for the Cebuano Philipp...
- DateTime::Locale::cgg (3)
- Locale data examples for the Chiga (cgg) locale
- DateTime::Locale::cgg (3pm)
- Locale data examples for the Chiga (cgg) locale
- DateTime::Locale::cgg_UG (3)
- Locale data examples for the Chiga Uganda (cgg...
- DateTime::Locale::cgg_UG (3pm)
- Locale data examples for the Chiga Uganda (c...
- DateTime::Locale::chr (3)
- Locale data examples for the Cherokee (chr) locale
- DateTime::Locale::chr (3pm)
- Locale data examples for the Cherokee (chr) locale
- DateTime::Locale::chr_US (3)
- Locale data examples for the Cherokee United S...
- DateTime::Locale::chr_US (3pm)
- Locale data examples for the Cherokee United...
- DateTime::Locale::ckb (3)
- Locale data examples for the Central Kurdish (ckb...
- DateTime::Locale::ckb (3pm)
- Locale data examples for the Central Kurdish (c...
- DateTime::Locale::ckb_IQ (3)
- Locale data examples for the Central Kurdish I...
- DateTime::Locale::ckb_IQ (3pm)
- Locale data examples for the Central Kurdish...
- DateTime::Locale::ckb_IR (3)
- Locale data examples for the Central Kurdish I...
- DateTime::Locale::ckb_IR (3pm)
- Locale data examples for the Central Kurdish...
- DateTime::Locale::cs (3)
- Locale data examples for the Czech (cs) locale
- DateTime::Locale::cs (3pm)
- Locale data examples for the Czech (cs) locale
- DateTime::Locale::cs_CZ (3)
- Locale data examples for the Czech Czechia (cs-...
- DateTime::Locale::cs_CZ (3pm)
- Locale data examples for the Czech Czechia (c...
- DateTime::Locale::cv (3)
- Locale data examples for the Chuvash (cv) locale
- DateTime::Locale::cv (3pm)
- Locale data examples for the Chuvash (cv) locale
- DateTime::Locale::cv_RU (3)
- Locale data examples for the Chuvash Russia (cv...
- DateTime::Locale::cv_RU (3pm)
- Locale data examples for the Chuvash Russia (...
- DateTime::Locale::cy (3)
- Locale data examples for the Welsh (cy) locale
- DateTime::Locale::cy (3pm)
- Locale data examples for the Welsh (cy) locale
- DateTime::Locale::cy_GB (3)
- Locale data examples for the Welsh United Kingd...
- DateTime::Locale::cy_GB (3pm)
- Locale data examples for the Welsh United Kin...
- DateTime::Locale::da (3)
- Locale data examples for the Danish (da) locale
- DateTime::Locale::da (3pm)
- Locale data examples for the Danish (da) locale
- DateTime::Locale::da_DK (3)
- Locale data examples for the Danish Denmark (da...
- DateTime::Locale::da_DK (3pm)
- Locale data examples for the Danish Denmark (...
- DateTime::Locale::da_GL (3)
- Locale data examples for the Danish Greenland (...
- DateTime::Locale::da_GL (3pm)
- Locale data examples for the Danish Greenland...
- DateTime::Locale::dav (3)
- Locale data examples for the Taita (dav) locale
- DateTime::Locale::dav (3pm)
- Locale data examples for the Taita (dav) locale
- DateTime::Locale::dav_KE (3)
- Locale data examples for the Taita Kenya (dav-...
- DateTime::Locale::dav_KE (3pm)
- Locale data examples for the Taita Kenya (da...
- DateTime::Locale::de (3)
- Locale data examples for the German (de) locale
- DateTime::Locale::de (3pm)
- Locale data examples for the German (de) locale
- DateTime::Locale::de_AT (3)
- Locale data examples for the German Austria (de...
- DateTime::Locale::de_AT (3pm)
- Locale data examples for the German Austria (...
- DateTime::Locale::de_BE (3)
- Locale data examples for the German Belgium (de...
- DateTime::Locale::de_BE (3pm)
- Locale data examples for the German Belgium (...
- DateTime::Locale::de_CH (3)
- Locale data examples for the German Switzerland...
- DateTime::Locale::de_CH (3pm)
- Locale data examples for the German Switzerla...
- DateTime::Locale::de_DE (3)
- Locale data examples for the German Germany (de...
- DateTime::Locale::de_DE (3pm)
- Locale data examples for the German Germany (...
- DateTime::Locale::de_IT (3)
- Locale data examples for the German Italy (de-I...
- DateTime::Locale::de_IT (3pm)
- Locale data examples for the German Italy (de...
- DateTime::Locale::de_LI (3)
- Locale data examples for the German Liechtenste...
- DateTime::Locale::de_LI (3pm)
- Locale data examples for the German Liechtens...
- DateTime::Locale::de_LU (3)
- Locale data examples for the German Luxembourg ...
- DateTime::Locale::de_LU (3pm)
- Locale data examples for the German Luxembour...
- DateTime::Locale::dje (3)
- Locale data examples for the Zarma (dje) locale
- DateTime::Locale::dje (3pm)
- Locale data examples for the Zarma (dje) locale
- DateTime::Locale::dje_NE (3)
- Locale data examples for the Zarma Niger (dje-...
- DateTime::Locale::dje_NE (3pm)
- Locale data examples for the Zarma Niger (dj...
- DateTime::Locale::doi (3)
- Locale data examples for the Dogri (doi) locale
- DateTime::Locale::doi (3pm)
- Locale data examples for the Dogri (doi) locale
- DateTime::Locale::doi_IN (3)
- Locale data examples for the Dogri India (doi-...
- DateTime::Locale::doi_IN (3pm)
- Locale data examples for the Dogri India (do...
- DateTime::Locale::dsb (3)
- Locale data examples for the Lower Sorbian (dsb) ...
- DateTime::Locale::dsb (3pm)
- Locale data examples for the Lower Sorbian (dsb...
- DateTime::Locale::dsb_DE (3)
- Locale data examples for the Lower Sorbian Ger...
- DateTime::Locale::dsb_DE (3pm)
- Locale data examples for the Lower Sorbian G...
- DateTime::Locale::dua (3)
- Locale data examples for the Duala (dua) locale
- DateTime::Locale::dua (3pm)
- Locale data examples for the Duala (dua) locale
- DateTime::Locale::dua_CM (3)
- Locale data examples for the Duala Cameroon (d...
- DateTime::Locale::dua_CM (3pm)
- Locale data examples for the Duala Cameroon ...
- DateTime::Locale::dyo (3)
- Locale data examples for the Jola-Fonyi (dyo) locale
- DateTime::Locale::dyo (3pm)
- Locale data examples for the Jola-Fonyi (dyo) l...
- DateTime::Locale::dyo_SN (3)
- Locale data examples for the Jola-Fonyi Senega...
- DateTime::Locale::dyo_SN (3pm)
- Locale data examples for the Jola-Fonyi Sene...
- DateTime::Locale::dz (3)
- Locale data examples for the Dzongkha (dz) locale
- DateTime::Locale::dz (3pm)
- Locale data examples for the Dzongkha (dz) locale
- DateTime::Locale::dz_BT (3)
- Locale data examples for the Dzongkha Bhutan (d...
- DateTime::Locale::dz_BT (3pm)
- Locale data examples for the Dzongkha Bhutan ...
- DateTime::Locale::ebu (3)
- Locale data examples for the Embu (ebu) locale
- DateTime::Locale::ebu (3pm)
- Locale data examples for the Embu (ebu) locale
- DateTime::Locale::ebu_KE (3)
- Locale data examples for the Embu Kenya (ebu-K...
- DateTime::Locale::ebu_KE (3pm)
- Locale data examples for the Embu Kenya (ebu...
- DateTime::Locale::ee (3)
- Locale data examples for the Ewe (ee) locale
- DateTime::Locale::ee (3pm)
- Locale data examples for the Ewe (ee) locale
- DateTime::Locale::ee_GH (3)
- Locale data examples for the Ewe Ghana (ee-GH) ...
- DateTime::Locale::ee_GH (3pm)
- Locale data examples for the Ewe Ghana (ee-GH...
- DateTime::Locale::ee_TG (3)
- Locale data examples for the Ewe Togo (ee-TG) l...
- DateTime::Locale::ee_TG (3pm)
- Locale data examples for the Ewe Togo (ee-TG)...
- DateTime::Locale::el (3)
- Locale data examples for the Greek (el) locale
- DateTime::Locale::el (3pm)
- Locale data examples for the Greek (el) locale
- DateTime::Locale::el_CY (3)
- Locale data examples for the Greek Cyprus (el-C...
- DateTime::Locale::el_CY (3pm)
- Locale data examples for the Greek Cyprus (el...
- DateTime::Locale::el_GR (3)
- Locale data examples for the Greek Greece (el-G...
- DateTime::Locale::el_GR (3pm)
- Locale data examples for the Greek Greece (el...
- DateTime::Locale::en (3)
- Locale data examples for the English (en) locale
- DateTime::Locale::en (3pm)
- Locale data examples for the English (en) locale
- DateTime::Locale::en_001 (3)
- Locale data examples for the English world (en...
- DateTime::Locale::en_001 (3pm)
- Locale data examples for the English world (...
- DateTime::Locale::en_150 (3)
- Locale data examples for the English Europe (e...
- DateTime::Locale::en_150 (3pm)
- Locale data examples for the English Europe ...
- DateTime::Locale::en_AE (3)
- Locale data examples for the English United Ara...
- DateTime::Locale::en_AE (3pm)
- Locale data examples for the English United A...
- DateTime::Locale::en_AG (3)
- Locale data examples for the English Antigua & ...
- DateTime::Locale::en_AG (3pm)
- Locale data examples for the English Antigua ...
- DateTime::Locale::en_AI (3)
- Locale data examples for the English Anguilla (...
- DateTime::Locale::en_AI (3pm)
- Locale data examples for the English Anguilla...
- DateTime::Locale::en_AS (3)
- Locale data examples for the English American S...
- DateTime::Locale::en_AS (3pm)
- Locale data examples for the English American...
- DateTime::Locale::en_AT (3)
- Locale data examples for the English Austria (e...
- DateTime::Locale::en_AT (3pm)
- Locale data examples for the English Austria ...
- DateTime::Locale::en_AU (3)
- Locale data examples for the English Australia ...
- DateTime::Locale::en_AU (3pm)
- Locale data examples for the English Australi...
- DateTime::Locale::en_BB (3)
- Locale data examples for the English Barbados (...
- DateTime::Locale::en_BB (3pm)
- Locale data examples for the English Barbados...
- DateTime::Locale::en_BE (3)
- Locale data examples for the English Belgium (e...
- DateTime::Locale::en_BE (3pm)
- Locale data examples for the English Belgium ...
- DateTime::Locale::en_BI (3)
- Locale data examples for the English Burundi (e...
- DateTime::Locale::en_BI (3pm)
- Locale data examples for the English Burundi ...
- DateTime::Locale::en_BM (3)
- Locale data examples for the English Bermuda (e...
- DateTime::Locale::en_BM (3pm)
- Locale data examples for the English Bermuda ...
- DateTime::Locale::en_BS (3)
- Locale data examples for the English Bahamas (e...
- DateTime::Locale::en_BS (3pm)
- Locale data examples for the English Bahamas ...
- DateTime::Locale::en_BW (3)
- Locale data examples for the English Botswana (...
- DateTime::Locale::en_BW (3pm)
- Locale data examples for the English Botswana...
- DateTime::Locale::en_BZ (3)
- Locale data examples for the English Belize (en...
- DateTime::Locale::en_BZ (3pm)
- Locale data examples for the English Belize (...
- DateTime::Locale::en_CA (3)
- Locale data examples for the English Canada (en...
- DateTime::Locale::en_CA (3pm)
- Locale data examples for the English Canada (...
- DateTime::Locale::en_CC (3)
- Locale data examples for the English Cocos (Kee...
- DateTime::Locale::en_CC (3pm)
- Locale data examples for the English Cocos (K...
- DateTime::Locale::en_CH (3)
- Locale data examples for the English Switzerlan...
- DateTime::Locale::en_CH (3pm)
- Locale data examples for the English Switzerl...
- DateTime::Locale::en_CK (3)
- Locale data examples for the English Cook Islan...
- DateTime::Locale::en_CK (3pm)
- Locale data examples for the English Cook Isl...
- DateTime::Locale::en_CM (3)
- Locale data examples for the English Cameroon (...
- DateTime::Locale::en_CM (3pm)
- Locale data examples for the English Cameroon...
- DateTime::Locale::en_CX (3)
- Locale data examples for the English Christmas ...
- DateTime::Locale::en_CX (3pm)
- Locale data examples for the English Christma...
- DateTime::Locale::en_CY (3)
- Locale data examples for the English Cyprus (en...
- DateTime::Locale::en_CY (3pm)
- Locale data examples for the English Cyprus (...
- DateTime::Locale::en_DE (3)
- Locale data examples for the English Germany (e...
- DateTime::Locale::en_DE (3pm)
- Locale data examples for the English Germany ...
- DateTime::Locale::en_DG (3)
- Locale data examples for the English Diego Garc...
- DateTime::Locale::en_DG (3pm)
- Locale data examples for the English Diego Ga...
- DateTime::Locale::en_DK (3)
- Locale data examples for the English Denmark (e...
- DateTime::Locale::en_DK (3pm)
- Locale data examples for the English Denmark ...
- DateTime::Locale::en_DM (3)
- Locale data examples for the English Dominica (...
- DateTime::Locale::en_DM (3pm)
- Locale data examples for the English Dominica...
- DateTime::Locale::en_ER (3)
- Locale data examples for the English Eritrea (e...
- DateTime::Locale::en_ER (3pm)
- Locale data examples for the English Eritrea ...
- DateTime::Locale::en_FI (3)
- Locale data examples for the English Finland (e...
- DateTime::Locale::en_FI (3pm)
- Locale data examples for the English Finland ...
- DateTime::Locale::en_FJ (3)
- Locale data examples for the English Fiji (en-F...
- DateTime::Locale::en_FJ (3pm)
- Locale data examples for the English Fiji (en...
- DateTime::Locale::en_FK (3)
- Locale data examples for the English Falkland I...
- DateTime::Locale::en_FK (3pm)
- Locale data examples for the English Falkland...
- DateTime::Locale::en_FM (3)
- Locale data examples for the English Micronesia...
- DateTime::Locale::en_FM (3pm)
- Locale data examples for the English Micrones...
- DateTime::Locale::en_GB (3)
- Locale data examples for the English United Kin...
- DateTime::Locale::en_GB (3pm)
- Locale data examples for the English United K...
- DateTime::Locale::en_GD (3)
- Locale data examples for the English Grenada (e...
- DateTime::Locale::en_GD (3pm)
- Locale data examples for the English Grenada ...
- DateTime::Locale::en_GG (3)
- Locale data examples for the English Guernsey (...
- DateTime::Locale::en_GG (3pm)
- Locale data examples for the English Guernsey...
- DateTime::Locale::en_GH (3)
- Locale data examples for the English Ghana (en-...
- DateTime::Locale::en_GH (3pm)
- Locale data examples for the English Ghana (e...
- DateTime::Locale::en_GI (3)
- Locale data examples for the English Gibraltar ...
- DateTime::Locale::en_GI (3pm)
- Locale data examples for the English Gibralta...
- DateTime::Locale::en_GM (3)
- Locale data examples for the English Gambia (en...
- DateTime::Locale::en_GM (3pm)
- Locale data examples for the English Gambia (...
- DateTime::Locale::en_GU (3)
- Locale data examples for the English Guam (en-G...
- DateTime::Locale::en_GU (3pm)
- Locale data examples for the English Guam (en...
- DateTime::Locale::en_GY (3)
- Locale data examples for the English Guyana (en...
- DateTime::Locale::en_GY (3pm)
- Locale data examples for the English Guyana (...
- DateTime::Locale::en_HK (3)
- Locale data examples for the English Hong Kong ...
- DateTime::Locale::en_HK (3pm)
- Locale data examples for the English Hong Kon...
- DateTime::Locale::en_IE (3)
- Locale data examples for the English Ireland (e...
- DateTime::Locale::en_IE (3pm)
- Locale data examples for the English Ireland ...
- DateTime::Locale::en_IL (3)
- Locale data examples for the English Israel (en...
- DateTime::Locale::en_IL (3pm)
- Locale data examples for the English Israel (...
- DateTime::Locale::en_IM (3)
- Locale data examples for the English Isle of Ma...
- DateTime::Locale::en_IM (3pm)
- Locale data examples for the English Isle of ...
- DateTime::Locale::en_IN (3)
- Locale data examples for the English India (en-...
- DateTime::Locale::en_IN (3pm)
- Locale data examples for the English India (e...
- DateTime::Locale::en_IO (3)
- Locale data examples for the English British In...
- DateTime::Locale::en_IO (3pm)
- Locale data examples for the English British ...
- DateTime::Locale::en_JE (3)
- Locale data examples for the English Jersey (en...
- DateTime::Locale::en_JE (3pm)
- Locale data examples for the English Jersey (...
- DateTime::Locale::en_JM (3)
- Locale data examples for the English Jamaica (e...
- DateTime::Locale::en_JM (3pm)
- Locale data examples for the English Jamaica ...
- DateTime::Locale::en_KE (3)
- Locale data examples for the English Kenya (en-...
- DateTime::Locale::en_KE (3pm)
- Locale data examples for the English Kenya (e...
- DateTime::Locale::en_KI (3)
- Locale data examples for the English Kiribati (...
- DateTime::Locale::en_KI (3pm)
- Locale data examples for the English Kiribati...
- DateTime::Locale::en_KN (3)
- Locale data examples for the English St. Kitts ...
- DateTime::Locale::en_KN (3pm)
- Locale data examples for the English St. Kitt...
- DateTime::Locale::en_KY (3)
- Locale data examples for the English Cayman Isl...
- DateTime::Locale::en_KY (3pm)
- Locale data examples for the English Cayman I...
- DateTime::Locale::en_LC (3)
- Locale data examples for the English St. Lucia ...
- DateTime::Locale::en_LC (3pm)
- Locale data examples for the English St. Luci...
- DateTime::Locale::en_LR (3)
- Locale data examples for the English Liberia (e...
- DateTime::Locale::en_LR (3pm)
- Locale data examples for the English Liberia ...
- DateTime::Locale::en_LS (3)
- Locale data examples for the English Lesotho (e...
- DateTime::Locale::en_LS (3pm)
- Locale data examples for the English Lesotho ...
- DateTime::Locale::en_MG (3)
- Locale data examples for the English Madagascar...
- DateTime::Locale::en_MG (3pm)
- Locale data examples for the English Madagasc...
- DateTime::Locale::en_MH (3)
- Locale data examples for the English Marshall I...
- DateTime::Locale::en_MH (3pm)
- Locale data examples for the English Marshall...
- DateTime::Locale::en_MO (3)
- Locale data examples for the English Macao SAR ...
- DateTime::Locale::en_MO (3pm)
- Locale data examples for the English Macao SA...
- DateTime::Locale::en_MP (3)
- Locale data examples for the English Northern M...
- DateTime::Locale::en_MP (3pm)
- Locale data examples for the English Northern...
- DateTime::Locale::en_MS (3)
- Locale data examples for the English Montserrat...
- DateTime::Locale::en_MS (3pm)
- Locale data examples for the English Montserr...
- DateTime::Locale::en_MT (3)
- Locale data examples for the English Malta (en-...
- DateTime::Locale::en_MT (3pm)
- Locale data examples for the English Malta (e...
- DateTime::Locale::en_MU (3)
- Locale data examples for the English Mauritius ...
- DateTime::Locale::en_MU (3pm)
- Locale data examples for the English Mauritiu...
- DateTime::Locale::en_MV (3)
- Locale data examples for the English Maldives (...
- DateTime::Locale::en_MV (3pm)
- Locale data examples for the English Maldives...
- DateTime::Locale::en_MW (3)
- Locale data examples for the English Malawi (en...
- DateTime::Locale::en_MW (3pm)
- Locale data examples for the English Malawi (...
- DateTime::Locale::en_MY (3)
- Locale data examples for the English Malaysia (...
- DateTime::Locale::en_MY (3pm)
- Locale data examples for the English Malaysia...
- DateTime::Locale::en_NA (3)
- Locale data examples for the English Namibia (e...
- DateTime::Locale::en_NA (3pm)
- Locale data examples for the English Namibia ...
- DateTime::Locale::en_NF (3)
- Locale data examples for the English Norfolk Is...
- DateTime::Locale::en_NF (3pm)
- Locale data examples for the English Norfolk ...
- DateTime::Locale::en_NG (3)
- Locale data examples for the English Nigeria (e...
- DateTime::Locale::en_NG (3pm)
- Locale data examples for the English Nigeria ...
- DateTime::Locale::en_NL (3)
- Locale data examples for the English Netherland...
- DateTime::Locale::en_NL (3pm)
- Locale data examples for the English Netherla...
- DateTime::Locale::en_NR (3)
- Locale data examples for the English Nauru (en-...
- DateTime::Locale::en_NR (3pm)
- Locale data examples for the English Nauru (e...
- DateTime::Locale::en_NU (3)
- Locale data examples for the English Niue (en-N...
- DateTime::Locale::en_NU (3pm)
- Locale data examples for the English Niue (en...
- DateTime::Locale::en_NZ (3)
- Locale data examples for the English New Zealan...
- DateTime::Locale::en_NZ (3pm)
- Locale data examples for the English New Zeal...
- DateTime::Locale::en_PG (3)
- Locale data examples for the English Papua New ...
- DateTime::Locale::en_PG (3pm)
- Locale data examples for the English Papua Ne...
- DateTime::Locale::en_PH (3)
- Locale data examples for the English Philippine...
- DateTime::Locale::en_PH (3pm)
- Locale data examples for the English Philippi...
- DateTime::Locale::en_PK (3)
- Locale data examples for the English Pakistan (...
- DateTime::Locale::en_PK (3pm)
- Locale data examples for the English Pakistan...
- DateTime::Locale::en_PN (3)
- Locale data examples for the English Pitcairn I...
- DateTime::Locale::en_PN (3pm)
- Locale data examples for the English Pitcairn...
- DateTime::Locale::en_PR (3)
- Locale data examples for the English Puerto Ric...
- DateTime::Locale::en_PR (3pm)
- Locale data examples for the English Puerto R...
- DateTime::Locale::en_PW (3)
- Locale data examples for the English Palau (en-...
- DateTime::Locale::en_PW (3pm)
- Locale data examples for the English Palau (e...
- DateTime::Locale::en_RW (3)
- Locale data examples for the English Rwanda (en...
- DateTime::Locale::en_RW (3pm)
- Locale data examples for the English Rwanda (...
- DateTime::Locale::en_SB (3)
- Locale data examples for the English Solomon Is...
- DateTime::Locale::en_SB (3pm)
- Locale data examples for the English Solomon ...
- DateTime::Locale::en_SC (3)
- Locale data examples for the English Seychelles...
- DateTime::Locale::en_SC (3pm)
- Locale data examples for the English Seychell...
- DateTime::Locale::en_SD (3)
- Locale data examples for the English Sudan (en-...
- DateTime::Locale::en_SD (3pm)
- Locale data examples for the English Sudan (e...
- DateTime::Locale::en_SE (3)
- Locale data examples for the English Sweden (en...
- DateTime::Locale::en_SE (3pm)
- Locale data examples for the English Sweden (...
- DateTime::Locale::en_SG (3)
- Locale data examples for the English Singapore ...
- DateTime::Locale::en_SG (3pm)
- Locale data examples for the English Singapor...
- DateTime::Locale::en_SH (3)
- Locale data examples for the English St. Helena...
- DateTime::Locale::en_SH (3pm)
- Locale data examples for the English St. Hele...
- DateTime::Locale::en_SI (3)
- Locale data examples for the English Slovenia (...
- DateTime::Locale::en_SI (3pm)
- Locale data examples for the English Slovenia...
- DateTime::Locale::en_SL (3)
- Locale data examples for the English Sierra Leo...
- DateTime::Locale::en_SL (3pm)
- Locale data examples for the English Sierra L...
- DateTime::Locale::en_SS (3)
- Locale data examples for the English South Suda...
- DateTime::Locale::en_SS (3pm)
- Locale data examples for the English South Su...
- DateTime::Locale::en_SX (3)
- Locale data examples for the English Sint Maart...
- DateTime::Locale::en_SX (3pm)
- Locale data examples for the English Sint Maa...
- DateTime::Locale::en_SZ (3)
- Locale data examples for the English Eswatini (...
- DateTime::Locale::en_SZ (3pm)
- Locale data examples for the English Eswatini...
- DateTime::Locale::en_TC (3)
- Locale data examples for the English Turks & Ca...
- DateTime::Locale::en_TC (3pm)
- Locale data examples for the English Turks & ...
- DateTime::Locale::en_TK (3)
- Locale data examples for the English Tokelau (e...
- DateTime::Locale::en_TK (3pm)
- Locale data examples for the English Tokelau ...
- DateTime::Locale::en_TO (3)
- Locale data examples for the English Tonga (en-...
- DateTime::Locale::en_TO (3pm)
- Locale data examples for the English Tonga (e...
- DateTime::Locale::en_TT (3)
- Locale data examples for the English Trinidad &...
- DateTime::Locale::en_TT (3pm)
- Locale data examples for the English Trinidad...
- DateTime::Locale::en_TV (3)
- Locale data examples for the English Tuvalu (en...
- DateTime::Locale::en_TV (3pm)
- Locale data examples for the English Tuvalu (...
- DateTime::Locale::en_TZ (3)
- Locale data examples for the English Tanzania (...
- DateTime::Locale::en_TZ (3pm)
- Locale data examples for the English Tanzania...
- DateTime::Locale::en_UG (3)
- Locale data examples for the English Uganda (en...
- DateTime::Locale::en_UG (3pm)
- Locale data examples for the English Uganda (...
- DateTime::Locale::en_UM (3)
- Locale data examples for the English U.S. Outly...
- DateTime::Locale::en_UM (3pm)
- Locale data examples for the English U.S. Out...
- DateTime::Locale::en_US (3)
- Locale data examples for the English United Sta...
- DateTime::Locale::en_US (3pm)
- Locale data examples for the English United S...
- DateTime::Locale::en_VC (3)
- Locale data examples for the English St. Vincen...
- DateTime::Locale::en_VC (3pm)
- Locale data examples for the English St. Vinc...
- DateTime::Locale::en_VG (3)
- Locale data examples for the English British Vi...
- DateTime::Locale::en_VG (3pm)
- Locale data examples for the English British ...
- DateTime::Locale::en_VI (3)
- Locale data examples for the English U.S. Virgi...
- DateTime::Locale::en_VI (3pm)
- Locale data examples for the English U.S. Vir...
- DateTime::Locale::en_VU (3)
- Locale data examples for the English Vanuatu (e...
- DateTime::Locale::en_VU (3pm)
- Locale data examples for the English Vanuatu ...
- DateTime::Locale::en_WS (3)
- Locale data examples for the English Samoa (en-...
- DateTime::Locale::en_WS (3pm)
- Locale data examples for the English Samoa (e...
- DateTime::Locale::en_ZA (3)
- Locale data examples for the English South Afri...
- DateTime::Locale::en_ZA (3pm)
- Locale data examples for the English South Af...
- DateTime::Locale::en_ZM (3)
- Locale data examples for the English Zambia (en...
- DateTime::Locale::en_ZM (3pm)
- Locale data examples for the English Zambia (...
- DateTime::Locale::en_ZW (3)
- Locale data examples for the English Zimbabwe (...
- DateTime::Locale::en_ZW (3pm)
- Locale data examples for the English Zimbabwe...
- DateTime::Locale::eo (3)
- Locale data examples for the Esperanto (eo) locale
- DateTime::Locale::eo (3pm)
- Locale data examples for the Esperanto (eo) locale
- DateTime::Locale::eo_001 (3)
- Locale data examples for the Esperanto world (...
- DateTime::Locale::eo_001 (3pm)
- Locale data examples for the Esperanto world...
- DateTime::Locale::es (3)
- Locale data examples for the Spanish (es) locale
- DateTime::Locale::es (3pm)
- Locale data examples for the Spanish (es) locale
- DateTime::Locale::es_419 (3)
- Locale data examples for the Spanish Latin Ame...
- DateTime::Locale::es_419 (3pm)
- Locale data examples for the Spanish Latin A...
- DateTime::Locale::es_AR (3)
- Locale data examples for the Spanish Argentina ...
- DateTime::Locale::es_AR (3pm)
- Locale data examples for the Spanish Argentin...
- DateTime::Locale::es_BO (3)
- Locale data examples for the Spanish Bolivia (e...
- DateTime::Locale::es_BO (3pm)
- Locale data examples for the Spanish Bolivia ...
- DateTime::Locale::es_BR (3)
- Locale data examples for the Spanish Brazil (es...
- DateTime::Locale::es_BR (3pm)
- Locale data examples for the Spanish Brazil (...
- DateTime::Locale::es_BZ (3)
- Locale data examples for the Spanish Belize (es...
- DateTime::Locale::es_BZ (3pm)
- Locale data examples for the Spanish Belize (...
- DateTime::Locale::es_CL (3)
- Locale data examples for the Spanish Chile (es-...
- DateTime::Locale::es_CL (3pm)
- Locale data examples for the Spanish Chile (e...
- DateTime::Locale::es_CO (3)
- Locale data examples for the Spanish Colombia (...
- DateTime::Locale::es_CO (3pm)
- Locale data examples for the Spanish Colombia...
- DateTime::Locale::es_CR (3)
- Locale data examples for the Spanish Costa Rica...
- DateTime::Locale::es_CR (3pm)
- Locale data examples for the Spanish Costa Ri...
- DateTime::Locale::es_CU (3)
- Locale data examples for the Spanish Cuba (es-C...
- DateTime::Locale::es_CU (3pm)
- Locale data examples for the Spanish Cuba (es...
- DateTime::Locale::es_DO (3)
- Locale data examples for the Spanish Dominican ...
- DateTime::Locale::es_DO (3pm)
- Locale data examples for the Spanish Dominica...
- DateTime::Locale::es_EA (3)
- Locale data examples for the Spanish Ceuta & Me...
- DateTime::Locale::es_EA (3pm)
- Locale data examples for the Spanish Ceuta & ...
- DateTime::Locale::es_EC (3)
- Locale data examples for the Spanish Ecuador (e...
- DateTime::Locale::es_EC (3pm)
- Locale data examples for the Spanish Ecuador ...
- DateTime::Locale::es_ES (3)
- Locale data examples for the Spanish Spain (es-...
- DateTime::Locale::es_ES (3pm)
- Locale data examples for the Spanish Spain (e...
- DateTime::Locale::es_GQ (3)
- Locale data examples for the Spanish Equatorial...
- DateTime::Locale::es_GQ (3pm)
- Locale data examples for the Spanish Equatori...
- DateTime::Locale::es_GT (3)
- Locale data examples for the Spanish Guatemala ...
- DateTime::Locale::es_GT (3pm)
- Locale data examples for the Spanish Guatemal...
- DateTime::Locale::es_HN (3)
- Locale data examples for the Spanish Honduras (...
- DateTime::Locale::es_HN (3pm)
- Locale data examples for the Spanish Honduras...
- DateTime::Locale::es_IC (3)
- Locale data examples for the Spanish Canary Isl...
- DateTime::Locale::es_IC (3pm)
- Locale data examples for the Spanish Canary I...
- DateTime::Locale::es_MX (3)
- Locale data examples for the Spanish Mexico (es...
- DateTime::Locale::es_MX (3pm)
- Locale data examples for the Spanish Mexico (...
- DateTime::Locale::es_NI (3)
- Locale data examples for the Spanish Nicaragua ...
- DateTime::Locale::es_NI (3pm)
- Locale data examples for the Spanish Nicaragu...
- DateTime::Locale::es_PA (3)
- Locale data examples for the Spanish Panama (es...
- DateTime::Locale::es_PA (3pm)
- Locale data examples for the Spanish Panama (...
- DateTime::Locale::es_PE (3)
- Locale data examples for the Spanish Peru (es-P...
- DateTime::Locale::es_PE (3pm)
- Locale data examples for the Spanish Peru (es...
- DateTime::Locale::es_PH (3)
- Locale data examples for the Spanish Philippine...
- DateTime::Locale::es_PH (3pm)
- Locale data examples for the Spanish Philippi...
- DateTime::Locale::es_PR (3)
- Locale data examples for the Spanish Puerto Ric...
- DateTime::Locale::es_PR (3pm)
- Locale data examples for the Spanish Puerto R...
- DateTime::Locale::es_PY (3)
- Locale data examples for the Spanish Paraguay (...
- DateTime::Locale::es_PY (3pm)
- Locale data examples for the Spanish Paraguay...
- DateTime::Locale::es_SV (3)
- Locale data examples for the Spanish El Salvado...
- DateTime::Locale::es_SV (3pm)
- Locale data examples for the Spanish El Salva...
- DateTime::Locale::es_US (3)
- Locale data examples for the Spanish United Sta...
- DateTime::Locale::es_US (3pm)
- Locale data examples for the Spanish United S...
- DateTime::Locale::es_UY (3)
- Locale data examples for the Spanish Uruguay (e...
- DateTime::Locale::es_UY (3pm)
- Locale data examples for the Spanish Uruguay ...
- DateTime::Locale::es_VE (3)
- Locale data examples for the Spanish Venezuela ...
- DateTime::Locale::es_VE (3pm)
- Locale data examples for the Spanish Venezuel...
- DateTime::Locale::et (3)
- Locale data examples for the Estonian (et) locale
- DateTime::Locale::et (3pm)
- Locale data examples for the Estonian (et) locale
- DateTime::Locale::et_EE (3)
- Locale data examples for the Estonian Estonia (...
- DateTime::Locale::et_EE (3pm)
- Locale data examples for the Estonian Estonia...
- DateTime::Locale::eu (3)
- Locale data examples for the Basque (eu) locale
- DateTime::Locale::eu (3pm)
- Locale data examples for the Basque (eu) locale
- DateTime::Locale::eu_ES (3)
- Locale data examples for the Basque Spain (eu-E...
- DateTime::Locale::eu_ES (3pm)
- Locale data examples for the Basque Spain (eu...
- DateTime::Locale::ewo (3)
- Locale data examples for the Ewondo (ewo) locale
- DateTime::Locale::ewo (3pm)
- Locale data examples for the Ewondo (ewo) locale
- DateTime::Locale::ewo_CM (3)
- Locale data examples for the Ewondo Cameroon (...
- DateTime::Locale::ewo_CM (3pm)
- Locale data examples for the Ewondo Cameroon...
- DateTime::Locale::fa (3)
- Locale data examples for the Persian (fa) locale
- DateTime::Locale::fa (3pm)
- Locale data examples for the Persian (fa) locale
- DateTime::Locale::fa_AF (3)
- Locale data examples for the Persian Afghanista...
- DateTime::Locale::fa_AF (3pm)
- Locale data examples for the Persian Afghanis...
- DateTime::Locale::fa_IR (3)
- Locale data examples for the Persian Iran (fa-I...
- DateTime::Locale::fa_IR (3pm)
- Locale data examples for the Persian Iran (fa...
- DateTime::Locale::ff (3)
- Locale data examples for the Fula (ff) locale
- DateTime::Locale::ff (3pm)
- Locale data examples for the Fula (ff) locale
- DateTime::Locale::ff_Adlm (3)
- Locale data examples for the Fula Adlam (ff-A...
- DateTime::Locale::ff_Adlm (3pm)
- Locale data examples for the Fula Adlam (ff...
- DateTime::Locale::ff_Adlm_BF (3)
- Locale data examples for the Fula Burkina ...
- DateTime::Locale::ff_Adlm_BF (3pm)
- Locale data examples for the Fula Burkin...
- DateTime::Locale::ff_Adlm_CM (3)
- Locale data examples for the Fula Cameroon...
- DateTime::Locale::ff_Adlm_CM (3pm)
- Locale data examples for the Fula Camero...
- DateTime::Locale::ff_Adlm_GH (3)
- Locale data examples for the Fula Ghana Ad...
- DateTime::Locale::ff_Adlm_GH (3pm)
- Locale data examples for the Fula Ghana ...
- DateTime::Locale::ff_Adlm_GM (3)
- Locale data examples for the Fula Gambia A...
- DateTime::Locale::ff_Adlm_GM (3pm)
- Locale data examples for the Fula Gambia...
- DateTime::Locale::ff_Adlm_GN (3)
- Locale data examples for the Fula Guinea A...
- DateTime::Locale::ff_Adlm_GN (3pm)
- Locale data examples for the Fula Guinea...
- DateTime::Locale::ff_Adlm_GW (3)
- Locale data examples for the Fula Guinea-B...
- DateTime::Locale::ff_Adlm_GW (3pm)
- Locale data examples for the Fula Guinea...
- DateTime::Locale::ff_Adlm_LR (3)
- Locale data examples for the Fula Liberia ...
- DateTime::Locale::ff_Adlm_LR (3pm)
- Locale data examples for the Fula Liberi...
- DateTime::Locale::ff_Adlm_MR (3)
- Locale data examples for the Fula Mauritan...
- DateTime::Locale::ff_Adlm_MR (3pm)
- Locale data examples for the Fula Maurit...
- DateTime::Locale::ff_Adlm_NE (3)
- Locale data examples for the Fula Niger Ad...
- DateTime::Locale::ff_Adlm_NE (3pm)
- Locale data examples for the Fula Niger ...
- DateTime::Locale::ff_Adlm_NG (3)
- Locale data examples for the Fula Nigeria ...
- DateTime::Locale::ff_Adlm_NG (3pm)
- Locale data examples for the Fula Nigeri...
- DateTime::Locale::ff_Adlm_SL (3)
- Locale data examples for the Fula Sierra L...
- DateTime::Locale::ff_Adlm_SL (3pm)
- Locale data examples for the Fula Sierra...
- DateTime::Locale::ff_Adlm_SN (3)
- Locale data examples for the Fula Senegal ...
- DateTime::Locale::ff_Adlm_SN (3pm)
- Locale data examples for the Fula Senega...
- DateTime::Locale::ff_Latn (3)
- Locale data examples for the Fula Latin (ff-L...
- DateTime::Locale::ff_Latn (3pm)
- Locale data examples for the Fula Latin (ff...
- DateTime::Locale::ff_Latn_BF (3)
- Locale data examples for the Fula Burkina ...
- DateTime::Locale::ff_Latn_BF (3pm)
- Locale data examples for the Fula Burkin...
- DateTime::Locale::ff_Latn_CM (3)
- Locale data examples for the Fula Cameroon...
- DateTime::Locale::ff_Latn_CM (3pm)
- Locale data examples for the Fula Camero...
- DateTime::Locale::ff_Latn_GH (3)
- Locale data examples for the Fula Ghana La...
- DateTime::Locale::ff_Latn_GH (3pm)
- Locale data examples for the Fula Ghana ...
- DateTime::Locale::ff_Latn_GM (3)
- Locale data examples for the Fula Gambia L...
- DateTime::Locale::ff_Latn_GM (3pm)
- Locale data examples for the Fula Gambia...
- DateTime::Locale::ff_Latn_GN (3)
- Locale data examples for the Fula Guinea L...
- DateTime::Locale::ff_Latn_GN (3pm)
- Locale data examples for the Fula Guinea...
- DateTime::Locale::ff_Latn_GW (3)
- Locale data examples for the Fula Guinea-B...
- DateTime::Locale::ff_Latn_GW (3pm)
- Locale data examples for the Fula Guinea...
- DateTime::Locale::ff_Latn_LR (3)
- Locale data examples for the Fula Liberia ...
- DateTime::Locale::ff_Latn_LR (3pm)
- Locale data examples for the Fula Liberi...
- DateTime::Locale::ff_Latn_MR (3)
- Locale data examples for the Fula Mauritan...
- DateTime::Locale::ff_Latn_MR (3pm)
- Locale data examples for the Fula Maurit...
- DateTime::Locale::ff_Latn_NE (3)
- Locale data examples for the Fula Niger La...
- DateTime::Locale::ff_Latn_NE (3pm)
- Locale data examples for the Fula Niger ...
- DateTime::Locale::ff_Latn_NG (3)
- Locale data examples for the Fula Nigeria ...
- DateTime::Locale::ff_Latn_NG (3pm)
- Locale data examples for the Fula Nigeri...
- DateTime::Locale::ff_Latn_SL (3)
- Locale data examples for the Fula Sierra L...
- DateTime::Locale::ff_Latn_SL (3pm)
- Locale data examples for the Fula Sierra...
- DateTime::Locale::ff_Latn_SN (3)
- Locale data examples for the Fula Senegal ...
- DateTime::Locale::ff_Latn_SN (3pm)
- Locale data examples for the Fula Senega...
- DateTime::Locale::fi (3)
- Locale data examples for the Finnish (fi) locale
- DateTime::Locale::fi (3pm)
- Locale data examples for the Finnish (fi) locale
- DateTime::Locale::fi_FI (3)
- Locale data examples for the Finnish Finland (f...
- DateTime::Locale::fi_FI (3pm)
- Locale data examples for the Finnish Finland ...
- DateTime::Locale::fil (3)
- Locale data examples for the Filipino (fil) locale
- DateTime::Locale::fil (3pm)
- Locale data examples for the Filipino (fil) locale
- DateTime::Locale::fil_PH (3)
- Locale data examples for the Filipino Philippi...
- DateTime::Locale::fil_PH (3pm)
- Locale data examples for the Filipino Philip...
- DateTime::Locale::fo (3)
- Locale data examples for the Faroese (fo) locale
- DateTime::Locale::fo (3pm)
- Locale data examples for the Faroese (fo) locale
- DateTime::Locale::fo_DK (3)
- Locale data examples for the Faroese Denmark (f...
- DateTime::Locale::fo_DK (3pm)
- Locale data examples for the Faroese Denmark ...
- DateTime::Locale::fo_FO (3)
- Locale data examples for the Faroese Faroe Isla...
- DateTime::Locale::fo_FO (3pm)
- Locale data examples for the Faroese Faroe Is...
- DateTime::Locale::fr (3)
- Locale data examples for the French (fr) locale
- DateTime::Locale::fr (3pm)
- Locale data examples for the French (fr) locale
- DateTime::Locale::fr_BE (3)
- Locale data examples for the French Belgium (fr...
- DateTime::Locale::fr_BE (3pm)
- Locale data examples for the French Belgium (...
- DateTime::Locale::fr_BF (3)
- Locale data examples for the French Burkina Fas...
- DateTime::Locale::fr_BF (3pm)
- Locale data examples for the French Burkina F...
- DateTime::Locale::fr_BI (3)
- Locale data examples for the French Burundi (fr...
- DateTime::Locale::fr_BI (3pm)
- Locale data examples for the French Burundi (...
- DateTime::Locale::fr_BJ (3)
- Locale data examples for the French Benin (fr-B...
- DateTime::Locale::fr_BJ (3pm)
- Locale data examples for the French Benin (fr...
- DateTime::Locale::fr_BL (3)
- Locale data examples for the French St. Barth...
- DateTime::Locale::fr_BL (3pm)
- Locale data examples for the French St. Barth...
- DateTime::Locale::fr_CA (3)
- Locale data examples for the French Canada (fr-...
- DateTime::Locale::fr_CA (3pm)
- Locale data examples for the French Canada (f...
- DateTime::Locale::fr_CD (3)
- Locale data examples for the French Congo - Kin...
- DateTime::Locale::fr_CD (3pm)
- Locale data examples for the French Congo - K...
- DateTime::Locale::fr_CF (3)
- Locale data examples for the French Central Afr...
- DateTime::Locale::fr_CF (3pm)
- Locale data examples for the French Central A...
- DateTime::Locale::fr_CG (3)
- Locale data examples for the French Congo - Bra...
- DateTime::Locale::fr_CG (3pm)
- Locale data examples for the French Congo - B...
- DateTime::Locale::fr_CH (3)
- Locale data examples for the French Switzerland...
- DateTime::Locale::fr_CH (3pm)
- Locale data examples for the French Switzerla...
- DateTime::Locale::fr_CI (3)
- Locale data examples for the French Cte dI...
- DateTime::Locale::fr_CI (3pm)
- Locale data examples for the French Cote dXIv...
- DateTime::Locale::fr_CM (3)
- Locale data examples for the French Cameroon (f...
- DateTime::Locale::fr_CM (3pm)
- Locale data examples for the French Cameroon ...
- DateTime::Locale::fr_DJ (3)
- Locale data examples for the French Djibouti (f...
- DateTime::Locale::fr_DJ (3pm)
- Locale data examples for the French Djibouti ...
- DateTime::Locale::fr_DZ (3)
- Locale data examples for the French Algeria (fr...
- DateTime::Locale::fr_DZ (3pm)
- Locale data examples for the French Algeria (...
- DateTime::Locale::fr_FR (3)
- Locale data examples for the French France (fr-...
- DateTime::Locale::fr_FR (3pm)
- Locale data examples for the French France (f...
- DateTime::Locale::fr_GA (3)
- Locale data examples for the French Gabon (fr-G...
- DateTime::Locale::fr_GA (3pm)
- Locale data examples for the French Gabon (fr...
- DateTime::Locale::fr_GF (3)
- Locale data examples for the French French Guia...
- DateTime::Locale::fr_GF (3pm)
- Locale data examples for the French French Gu...
- DateTime::Locale::fr_GN (3)
- Locale data examples for the French Guinea (fr-...
- DateTime::Locale::fr_GN (3pm)
- Locale data examples for the French Guinea (f...
- DateTime::Locale::fr_GP (3)
- Locale data examples for the French Guadeloupe ...
- DateTime::Locale::fr_GP (3pm)
- Locale data examples for the French Guadeloup...
- DateTime::Locale::fr_GQ (3)
- Locale data examples for the French Equatorial ...
- DateTime::Locale::fr_GQ (3pm)
- Locale data examples for the French Equatoria...
- DateTime::Locale::fr_HT (3)
- Locale data examples for the French Haiti (fr-H...
- DateTime::Locale::fr_HT (3pm)
- Locale data examples for the French Haiti (fr...
- DateTime::Locale::fr_KM (3)
- Locale data examples for the French Comoros (fr...
- DateTime::Locale::fr_KM (3pm)
- Locale data examples for the French Comoros (...
- DateTime::Locale::fr_LU (3)
- Locale data examples for the French Luxembourg ...
- DateTime::Locale::fr_LU (3pm)
- Locale data examples for the French Luxembour...
- DateTime::Locale::fr_MA (3)
- Locale data examples for the French Morocco (fr...
- DateTime::Locale::fr_MA (3pm)
- Locale data examples for the French Morocco (...
- DateTime::Locale::fr_MC (3)
- Locale data examples for the French Monaco (fr-...
- DateTime::Locale::fr_MC (3pm)
- Locale data examples for the French Monaco (f...
- DateTime::Locale::fr_MF (3)
- Locale data examples for the French St. Martin ...
- DateTime::Locale::fr_MF (3pm)
- Locale data examples for the French St. Marti...
- DateTime::Locale::fr_MG (3)
- Locale data examples for the French Madagascar ...
- DateTime::Locale::fr_MG (3pm)
- Locale data examples for the French Madagasca...
- DateTime::Locale::fr_ML (3)
- Locale data examples for the French Mali (fr-ML...
- DateTime::Locale::fr_ML (3pm)
- Locale data examples for the French Mali (fr-...
- DateTime::Locale::fr_MQ (3)
- Locale data examples for the French Martinique ...
- DateTime::Locale::fr_MQ (3pm)
- Locale data examples for the French Martiniqu...
- DateTime::Locale::fr_MR (3)
- Locale data examples for the French Mauritania ...
- DateTime::Locale::fr_MR (3pm)
- Locale data examples for the French Mauritani...
- DateTime::Locale::fr_MU (3)
- Locale data examples for the French Mauritius (...
- DateTime::Locale::fr_MU (3pm)
- Locale data examples for the French Mauritius...
- DateTime::Locale::fr_NC (3)
- Locale data examples for the French New Caledon...
- DateTime::Locale::fr_NC (3pm)
- Locale data examples for the French New Caled...
- DateTime::Locale::fr_NE (3)
- Locale data examples for the French Niger (fr-N...
- DateTime::Locale::fr_NE (3pm)
- Locale data examples for the French Niger (fr...
- DateTime::Locale::fr_PF (3)
- Locale data examples for the French French Poly...
- DateTime::Locale::fr_PF (3pm)
- Locale data examples for the French French Po...
- DateTime::Locale::fr_PM (3)
- Locale data examples for the French St. Pierre ...
- DateTime::Locale::fr_PM (3pm)
- Locale data examples for the French St. Pierr...
- DateTime::Locale::fr_RE (3)
- Locale data examples for the French Runion (f...
- DateTime::Locale::fr_RE (3pm)
- Locale data examples for the French Reunion (...
- DateTime::Locale::fr_RW (3)
- Locale data examples for the French Rwanda (fr-...
- DateTime::Locale::fr_RW (3pm)
- Locale data examples for the French Rwanda (f...
- DateTime::Locale::fr_SC (3)
- Locale data examples for the French Seychelles ...
- DateTime::Locale::fr_SC (3pm)
- Locale data examples for the French Seychelle...
- DateTime::Locale::fr_SN (3)
- Locale data examples for the French Senegal (fr...
- DateTime::Locale::fr_SN (3pm)
- Locale data examples for the French Senegal (...
- DateTime::Locale::fr_SY (3)
- Locale data examples for the French Syria (fr-S...
- DateTime::Locale::fr_SY (3pm)
- Locale data examples for the French Syria (fr...
- DateTime::Locale::fr_TD (3)
- Locale data examples for the French Chad (fr-TD...
- DateTime::Locale::fr_TD (3pm)
- Locale data examples for the French Chad (fr-...
- DateTime::Locale::fr_TG (3)
- Locale data examples for the French Togo (fr-TG...
- DateTime::Locale::fr_TG (3pm)
- Locale data examples for the French Togo (fr-...
- DateTime::Locale::fr_TN (3)
- Locale data examples for the French Tunisia (fr...
- DateTime::Locale::fr_TN (3pm)
- Locale data examples for the French Tunisia (...
- DateTime::Locale::fr_VU (3)
- Locale data examples for the French Vanuatu (fr...
- DateTime::Locale::fr_VU (3pm)
- Locale data examples for the French Vanuatu (...
- DateTime::Locale::fr_WF (3)
- Locale data examples for the French Wallis & Fu...
- DateTime::Locale::fr_WF (3pm)
- Locale data examples for the French Wallis & ...
- DateTime::Locale::fr_YT (3)
- Locale data examples for the French Mayotte (fr...
- DateTime::Locale::fr_YT (3pm)
- Locale data examples for the French Mayotte (...
- DateTime::Locale::frr (3)
- Locale data examples for the Northern Frisian (fr...
- DateTime::Locale::frr (3pm)
- Locale data examples for the Northern Frisian (...
- DateTime::Locale::frr_DE (3)
- Locale data examples for the Northern Frisian ...
- DateTime::Locale::frr_DE (3pm)
- Locale data examples for the Northern Frisia...
- DateTime::Locale::fur (3)
- Locale data examples for the Friulian (fur) locale
- DateTime::Locale::fur (3pm)
- Locale data examples for the Friulian (fur) locale
- DateTime::Locale::fur_IT (3)
- Locale data examples for the Friulian Italy (f...
- DateTime::Locale::fur_IT (3pm)
- Locale data examples for the Friulian Italy ...
- DateTime::Locale::fy (3)
- Locale data examples for the Western Frisian (fy) ...
- DateTime::Locale::fy (3pm)
- Locale data examples for the Western Frisian (fy...
- DateTime::Locale::fy_NL (3)
- Locale data examples for the Western Frisian Ne...
- DateTime::Locale::fy_NL (3pm)
- Locale data examples for the Western Frisian ...
- DateTime::Locale::ga (3)
- Locale data examples for the Irish (ga) locale
- DateTime::Locale::ga (3pm)
- Locale data examples for the Irish (ga) locale
- DateTime::Locale::ga_GB (3)
- Locale data examples for the Irish United Kingd...
- DateTime::Locale::ga_GB (3pm)
- Locale data examples for the Irish United Kin...
- DateTime::Locale::ga_IE (3)
- Locale data examples for the Irish Ireland (ga-...
- DateTime::Locale::ga_IE (3pm)
- Locale data examples for the Irish Ireland (g...
- DateTime::Locale::gd (3)
- Locale data examples for the Scottish Gaelic (gd) ...
- DateTime::Locale::gd (3pm)
- Locale data examples for the Scottish Gaelic (gd...
- DateTime::Locale::gd_GB (3)
- Locale data examples for the Scottish Gaelic Un...
- DateTime::Locale::gd_GB (3pm)
- Locale data examples for the Scottish Gaelic ...
- DateTime::Locale::gl (3)
- Locale data examples for the Galician (gl) locale
- DateTime::Locale::gl (3pm)
- Locale data examples for the Galician (gl) locale
- DateTime::Locale::gl_ES (3)
- Locale data examples for the Galician Spain (gl...
- DateTime::Locale::gl_ES (3pm)
- Locale data examples for the Galician Spain (...
- DateTime::Locale::gsw (3)
- Locale data examples for the Swiss German (gsw) l...
- DateTime::Locale::gsw (3pm)
- Locale data examples for the Swiss German (gsw)...
- DateTime::Locale::gsw_CH (3)
- Locale data examples for the Swiss German Swit...
- DateTime::Locale::gsw_CH (3pm)
- Locale data examples for the Swiss German Sw...
- DateTime::Locale::gsw_FR (3)
- Locale data examples for the Swiss German Fran...
- DateTime::Locale::gsw_FR (3pm)
- Locale data examples for the Swiss German Fr...
- DateTime::Locale::gsw_LI (3)
- Locale data examples for the Swiss German Liec...
- DateTime::Locale::gsw_LI (3pm)
- Locale data examples for the Swiss German Li...
- DateTime::Locale::gu (3)
- Locale data examples for the Gujarati (gu) locale
- DateTime::Locale::gu (3pm)
- Locale data examples for the Gujarati (gu) locale
- DateTime::Locale::gu_IN (3)
- Locale data examples for the Gujarati India (gu...
- DateTime::Locale::gu_IN (3pm)
- Locale data examples for the Gujarati India (...
- DateTime::Locale::guz (3)
- Locale data examples for the Gusii (guz) locale
- DateTime::Locale::guz (3pm)
- Locale data examples for the Gusii (guz) locale
- DateTime::Locale::guz_KE (3)
- Locale data examples for the Gusii Kenya (guz-...
- DateTime::Locale::guz_KE (3pm)
- Locale data examples for the Gusii Kenya (gu...
- DateTime::Locale::gv (3)
- Locale data examples for the Manx (gv) locale
- DateTime::Locale::gv (3pm)
- Locale data examples for the Manx (gv) locale
- DateTime::Locale::gv_IM (3)
- Locale data examples for the Manx Isle of Man (...
- DateTime::Locale::gv_IM (3pm)
- Locale data examples for the Manx Isle of Man...
- DateTime::Locale::ha (3)
- Locale data examples for the Hausa (ha) locale
- DateTime::Locale::ha (3pm)
- Locale data examples for the Hausa (ha) locale
- DateTime::Locale::ha_GH (3)
- Locale data examples for the Hausa Ghana (ha-GH...
- DateTime::Locale::ha_GH (3pm)
- Locale data examples for the Hausa Ghana (ha-...
- DateTime::Locale::ha_NE (3)
- Locale data examples for the Hausa Niger (ha-NE...
- DateTime::Locale::ha_NE (3pm)
- Locale data examples for the Hausa Niger (ha-...
- DateTime::Locale::ha_NG (3)
- Locale data examples for the Hausa Nigeria (ha-...
- DateTime::Locale::ha_NG (3pm)
- Locale data examples for the Hausa Nigeria (h...
- DateTime::Locale::haw (3)
- Locale data examples for the Hawaiian (haw) locale
- DateTime::Locale::haw (3pm)
- Locale data examples for the Hawaiian (haw) locale
- DateTime::Locale::haw_US (3)
- Locale data examples for the Hawaiian United S...
- DateTime::Locale::haw_US (3pm)
- Locale data examples for the Hawaiian United...
- DateTime::Locale::he (3)
- Locale data examples for the Hebrew (he) locale
- DateTime::Locale::he (3pm)
- Locale data examples for the Hebrew (he) locale
- DateTime::Locale::he_IL (3)
- Locale data examples for the Hebrew Israel (he-...
- DateTime::Locale::he_IL (3pm)
- Locale data examples for the Hebrew Israel (h...
- DateTime::Locale::hi (3)
- Locale data examples for the Hindi (hi) locale
- DateTime::Locale::hi (3pm)
- Locale data examples for the Hindi (hi) locale
- DateTime::Locale::hi_IN (3)
- Locale data examples for the Hindi India (hi-IN...
- DateTime::Locale::hi_IN (3pm)
- Locale data examples for the Hindi India (hi-...
- DateTime::Locale::hi_Latn (3)
- Locale data examples for the Hindi Latin (hi-...
- DateTime::Locale::hi_Latn (3pm)
- Locale data examples for the Hindi Latin (h...
- DateTime::Locale::hi_Latn_IN (3)
- Locale data examples for the Hindi India L...
- DateTime::Locale::hi_Latn_IN (3pm)
- Locale data examples for the Hindi India...
- DateTime::Locale::hr (3)
- Locale data examples for the Croatian (hr) locale
- DateTime::Locale::hr (3pm)
- Locale data examples for the Croatian (hr) locale
- DateTime::Locale::hr_BA (3)
- Locale data examples for the Croatian Bosnia & ...
- DateTime::Locale::hr_BA (3pm)
- Locale data examples for the Croatian Bosnia ...
- DateTime::Locale::hr_HR (3)
- Locale data examples for the Croatian Croatia (...
- DateTime::Locale::hr_HR (3pm)
- Locale data examples for the Croatian Croatia...
- DateTime::Locale::hsb (3)
- Locale data examples for the Upper Sorbian (hsb) ...
- DateTime::Locale::hsb (3pm)
- Locale data examples for the Upper Sorbian (hsb...
- DateTime::Locale::hsb_DE (3)
- Locale data examples for the Upper Sorbian Ger...
- DateTime::Locale::hsb_DE (3pm)
- Locale data examples for the Upper Sorbian G...
- DateTime::Locale::hu (3)
- Locale data examples for the Hungarian (hu) locale
- DateTime::Locale::hu (3pm)
- Locale data examples for the Hungarian (hu) locale
- DateTime::Locale::hu_HU (3)
- Locale data examples for the Hungarian Hungary ...
- DateTime::Locale::hu_HU (3pm)
- Locale data examples for the Hungarian Hungar...
- DateTime::Locale::hy (3)
- Locale data examples for the Armenian (hy) locale
- DateTime::Locale::hy (3pm)
- Locale data examples for the Armenian (hy) locale
- DateTime::Locale::hy_AM (3)
- Locale data examples for the Armenian Armenia (...
- DateTime::Locale::hy_AM (3pm)
- Locale data examples for the Armenian Armenia...
- DateTime::Locale::ia (3)
- Locale data examples for the Interlingua (ia) locale
- DateTime::Locale::ia (3pm)
- Locale data examples for the Interlingua (ia) lo...
- DateTime::Locale::ia_001 (3)
- Locale data examples for the Interlingua world...
- DateTime::Locale::ia_001 (3pm)
- Locale data examples for the Interlingua wor...
- DateTime::Locale::id (3)
- Locale data examples for the Indonesian (id) locale
- DateTime::Locale::id (3pm)
- Locale data examples for the Indonesian (id) locale
- DateTime::Locale::id_ID (3)
- Locale data examples for the Indonesian Indones...
- DateTime::Locale::id_ID (3pm)
- Locale data examples for the Indonesian Indon...
- DateTime::Locale::ig (3)
- Locale data examples for the Igbo (ig) locale
- DateTime::Locale::ig (3pm)
- Locale data examples for the Igbo (ig) locale
- DateTime::Locale::ig_NG (3)
- Locale data examples for the Igbo Nigeria (ig-N...
- DateTime::Locale::ig_NG (3pm)
- Locale data examples for the Igbo Nigeria (ig...
- DateTime::Locale::ii (3)
- Locale data examples for the Sichuan Yi (ii) locale
- DateTime::Locale::ii (3pm)
- Locale data examples for the Sichuan Yi (ii) locale
- DateTime::Locale::ii_CN (3)
- Locale data examples for the Sichuan Yi China (...
- DateTime::Locale::ii_CN (3pm)
- Locale data examples for the Sichuan Yi China...
- DateTime::Locale::is (3)
- Locale data examples for the Icelandic (is) locale
- DateTime::Locale::is (3pm)
- Locale data examples for the Icelandic (is) locale
- DateTime::Locale::is_IS (3)
- Locale data examples for the Icelandic Iceland ...
- DateTime::Locale::is_IS (3pm)
- Locale data examples for the Icelandic Icelan...
- DateTime::Locale::it (3)
- Locale data examples for the Italian (it) locale
- DateTime::Locale::it (3pm)
- Locale data examples for the Italian (it) locale
- DateTime::Locale::it_CH (3)
- Locale data examples for the Italian Switzerlan...
- DateTime::Locale::it_CH (3pm)
- Locale data examples for the Italian Switzerl...
- DateTime::Locale::it_IT (3)
- Locale data examples for the Italian Italy (it-...
- DateTime::Locale::it_IT (3pm)
- Locale data examples for the Italian Italy (i...
- DateTime::Locale::it_SM (3)
- Locale data examples for the Italian San Marino...
- DateTime::Locale::it_SM (3pm)
- Locale data examples for the Italian San Mari...
- DateTime::Locale::it_VA (3)
- Locale data examples for the Italian Vatican Ci...
- DateTime::Locale::it_VA (3pm)
- Locale data examples for the Italian Vatican ...
- DateTime::Locale::ja (3)
- Locale data examples for the Japanese (ja) locale
- DateTime::Locale::ja (3pm)
- Locale data examples for the Japanese (ja) locale
- DateTime::Locale::ja_JP (3)
- Locale data examples for the Japanese Japan (ja...
- DateTime::Locale::ja_JP (3pm)
- Locale data examples for the Japanese Japan (...
- DateTime::Locale::jgo (3)
- Locale data examples for the Ngomba (jgo) locale
- DateTime::Locale::jgo (3pm)
- Locale data examples for the Ngomba (jgo) locale
- DateTime::Locale::jgo_CM (3)
- Locale data examples for the Ngomba Cameroon (...
- DateTime::Locale::jgo_CM (3pm)
- Locale data examples for the Ngomba Cameroon...
- DateTime::Locale::jmc (3)
- Locale data examples for the Machame (jmc) locale
- DateTime::Locale::jmc (3pm)
- Locale data examples for the Machame (jmc) locale
- DateTime::Locale::jmc_TZ (3)
- Locale data examples for the Machame Tanzania ...
- DateTime::Locale::jmc_TZ (3pm)
- Locale data examples for the Machame Tanzani...
- DateTime::Locale::jv (3)
- Locale data examples for the Javanese (jv) locale
- DateTime::Locale::jv (3pm)
- Locale data examples for the Javanese (jv) locale
- DateTime::Locale::jv_ID (3)
- Locale data examples for the Javanese Indonesia...
- DateTime::Locale::jv_ID (3pm)
- Locale data examples for the Javanese Indones...
- DateTime::Locale::ka (3)
- Locale data examples for the Georgian (ka) locale
- DateTime::Locale::ka (3pm)
- Locale data examples for the Georgian (ka) locale
- DateTime::Locale::ka_GE (3)
- Locale data examples for the Georgian Georgia (...
- DateTime::Locale::ka_GE (3pm)
- Locale data examples for the Georgian Georgia...
- DateTime::Locale::kab (3)
- Locale data examples for the Kabyle (kab) locale
- DateTime::Locale::kab (3pm)
- Locale data examples for the Kabyle (kab) locale
- DateTime::Locale::kab_DZ (3)
- Locale data examples for the Kabyle Algeria (k...
- DateTime::Locale::kab_DZ (3pm)
- Locale data examples for the Kabyle Algeria ...
- DateTime::Locale::kam (3)
- Locale data examples for the Kamba (kam) locale
- DateTime::Locale::kam (3pm)
- Locale data examples for the Kamba (kam) locale
- DateTime::Locale::kam_KE (3)
- Locale data examples for the Kamba Kenya (kam-...
- DateTime::Locale::kam_KE (3pm)
- Locale data examples for the Kamba Kenya (ka...
- DateTime::Locale::kde (3)
- Locale data examples for the Makonde (kde) locale
- DateTime::Locale::kde (3pm)
- Locale data examples for the Makonde (kde) locale
- DateTime::Locale::kde_TZ (3)
- Locale data examples for the Makonde Tanzania ...
- DateTime::Locale::kde_TZ (3pm)
- Locale data examples for the Makonde Tanzani...
- DateTime::Locale::kea (3)
- Locale data examples for the Kabuverdianu (kea) l...
- DateTime::Locale::kea (3pm)
- Locale data examples for the Kabuverdianu (kea)...
- DateTime::Locale::kea_CV (3)
- Locale data examples for the Kabuverdianu Cape...
- DateTime::Locale::kea_CV (3pm)
- Locale data examples for the Kabuverdianu Ca...
- DateTime::Locale::kgp (3)
- Locale data examples for the Kaingang (kgp) locale
- DateTime::Locale::kgp (3pm)
- Locale data examples for the Kaingang (kgp) locale
- DateTime::Locale::kgp_BR (3)
- Locale data examples for the Kaingang Brazil (...
- DateTime::Locale::kgp_BR (3pm)
- Locale data examples for the Kaingang Brazil...
- DateTime::Locale::khq (3)
- Locale data examples for the Koyra Chiini (khq) l...
- DateTime::Locale::khq (3pm)
- Locale data examples for the Koyra Chiini (khq)...
- DateTime::Locale::khq_ML (3)
- Locale data examples for the Koyra Chiini Mali...
- DateTime::Locale::khq_ML (3pm)
- Locale data examples for the Koyra Chiini Ma...
- DateTime::Locale::ki (3)
- Locale data examples for the Kikuyu (ki) locale
- DateTime::Locale::ki (3pm)
- Locale data examples for the Kikuyu (ki) locale
- DateTime::Locale::ki_KE (3)
- Locale data examples for the Kikuyu Kenya (ki-K...
- DateTime::Locale::ki_KE (3pm)
- Locale data examples for the Kikuyu Kenya (ki...
- DateTime::Locale::kk (3)
- Locale data examples for the Kazakh (kk) locale
- DateTime::Locale::kk (3pm)
- Locale data examples for the Kazakh (kk) locale
- DateTime::Locale::kk_KZ (3)
- Locale data examples for the Kazakh Kazakhstan ...
- DateTime::Locale::kk_KZ (3pm)
- Locale data examples for the Kazakh Kazakhsta...
- DateTime::Locale::kkj (3)
- Locale data examples for the Kako (kkj) locale
- DateTime::Locale::kkj (3pm)
- Locale data examples for the Kako (kkj) locale
- DateTime::Locale::kkj_CM (3)
- Locale data examples for the Kako Cameroon (kk...
- DateTime::Locale::kkj_CM (3pm)
- Locale data examples for the Kako Cameroon (...
- DateTime::Locale::kl (3)
- Locale data examples for the Kalaallisut (kl) locale
- DateTime::Locale::kl (3pm)
- Locale data examples for the Kalaallisut (kl) lo...
- DateTime::Locale::kl_GL (3)
- Locale data examples for the Kalaallisut Greenl...
- DateTime::Locale::kl_GL (3pm)
- Locale data examples for the Kalaallisut Gree...
- DateTime::Locale::kln (3)
- Locale data examples for the Kalenjin (kln) locale
- DateTime::Locale::kln (3pm)
- Locale data examples for the Kalenjin (kln) locale
- DateTime::Locale::kln_KE (3)
- Locale data examples for the Kalenjin Kenya (k...
- DateTime::Locale::kln_KE (3pm)
- Locale data examples for the Kalenjin Kenya ...
- DateTime::Locale::km (3)
- Locale data examples for the Khmer (km) locale
- DateTime::Locale::km (3pm)
- Locale data examples for the Khmer (km) locale
- DateTime::Locale::km_KH (3)
- Locale data examples for the Khmer Cambodia (km...
- DateTime::Locale::km_KH (3pm)
- Locale data examples for the Khmer Cambodia (...
- DateTime::Locale::kn (3)
- Locale data examples for the Kannada (kn) locale
- DateTime::Locale::kn (3pm)
- Locale data examples for the Kannada (kn) locale
- DateTime::Locale::kn_IN (3)
- Locale data examples for the Kannada India (kn-...
- DateTime::Locale::kn_IN (3pm)
- Locale data examples for the Kannada India (k...
- DateTime::Locale::ko (3)
- Locale data examples for the Korean (ko) locale
- DateTime::Locale::ko (3pm)
- Locale data examples for the Korean (ko) locale
- DateTime::Locale::ko_KP (3)
- Locale data examples for the Korean North Korea...
- DateTime::Locale::ko_KP (3pm)
- Locale data examples for the Korean North Kor...
- DateTime::Locale::ko_KR (3)
- Locale data examples for the Korean South Korea...
- DateTime::Locale::ko_KR (3pm)
- Locale data examples for the Korean South Kor...
- DateTime::Locale::kok (3)
- Locale data examples for the Konkani (kok) locale
- DateTime::Locale::kok (3pm)
- Locale data examples for the Konkani (kok) locale
- DateTime::Locale::kok_IN (3)
- Locale data examples for the Konkani India (ko...
- DateTime::Locale::kok_IN (3pm)
- Locale data examples for the Konkani India (...
- DateTime::Locale::ks (3)
- Locale data examples for the Kashmiri (ks) locale
- DateTime::Locale::ks (3pm)
- Locale data examples for the Kashmiri (ks) locale
- DateTime::Locale::ks_Arab (3)
- Locale data examples for the Kashmiri Arabic ...
- DateTime::Locale::ks_Arab (3pm)
- Locale data examples for the Kashmiri Arabi...
- DateTime::Locale::ks_Arab_IN (3)
- Locale data examples for the Kashmiri Indi...
- DateTime::Locale::ks_Arab_IN (3pm)
- Locale data examples for the Kashmiri In...
- DateTime::Locale::ks_Deva (3)
- Locale data examples for the Kashmiri Devanag...
- DateTime::Locale::ks_Deva (3pm)
- Locale data examples for the Kashmiri Devan...
- DateTime::Locale::ks_Deva_IN (3)
- Locale data examples for the Kashmiri Indi...
- DateTime::Locale::ks_Deva_IN (3pm)
- Locale data examples for the Kashmiri In...
- DateTime::Locale::ksb (3)
- Locale data examples for the Shambala (ksb) locale
- DateTime::Locale::ksb (3pm)
- Locale data examples for the Shambala (ksb) locale
- DateTime::Locale::ksb_TZ (3)
- Locale data examples for the Shambala Tanzania...
- DateTime::Locale::ksb_TZ (3pm)
- Locale data examples for the Shambala Tanzan...
- DateTime::Locale::ksf (3)
- Locale data examples for the Bafia (ksf) locale
- DateTime::Locale::ksf (3pm)
- Locale data examples for the Bafia (ksf) locale
- DateTime::Locale::ksf_CM (3)
- Locale data examples for the Bafia Cameroon (k...
- DateTime::Locale::ksf_CM (3pm)
- Locale data examples for the Bafia Cameroon ...
- DateTime::Locale::ksh (3)
- Locale data examples for the Colognian (ksh) locale
- DateTime::Locale::ksh (3pm)
- Locale data examples for the Colognian (ksh) lo...
- DateTime::Locale::ksh_DE (3)
- Locale data examples for the Colognian Germany...
- DateTime::Locale::ksh_DE (3pm)
- Locale data examples for the Colognian Germa...
- DateTime::Locale::ku (3)
- Locale data examples for the Kurdish (ku) locale
- DateTime::Locale::ku (3pm)
- Locale data examples for the Kurdish (ku) locale
- DateTime::Locale::ku_TR (3)
- Locale data examples for the Kurdish Trkiye (...
- DateTime::Locale::ku_TR (3pm)
- Locale data examples for the Kurdish Turkey (...
- DateTime::Locale::kw (3)
- Locale data examples for the Cornish (kw) locale
- DateTime::Locale::kw (3pm)
- Locale data examples for the Cornish (kw) locale
- DateTime::Locale::kw_GB (3)
- Locale data examples for the Cornish United Kin...
- DateTime::Locale::kw_GB (3pm)
- Locale data examples for the Cornish United K...
- DateTime::Locale::ky (3)
- Locale data examples for the Kyrgyz (ky) locale
- DateTime::Locale::ky (3pm)
- Locale data examples for the Kyrgyz (ky) locale
- DateTime::Locale::ky_KG (3)
- Locale data examples for the Kyrgyz Kyrgyzstan ...
- DateTime::Locale::ky_KG (3pm)
- Locale data examples for the Kyrgyz Kyrgyzsta...
- DateTime::Locale::lag (3)
- Locale data examples for the Langi (lag) locale
- DateTime::Locale::lag (3pm)
- Locale data examples for the Langi (lag) locale
- DateTime::Locale::lag_TZ (3)
- Locale data examples for the Langi Tanzania (l...
- DateTime::Locale::lag_TZ (3pm)
- Locale data examples for the Langi Tanzania ...
- DateTime::Locale::lb (3)
- Locale data examples for the Luxembourgish (lb) lo...
- DateTime::Locale::lb (3pm)
- Locale data examples for the Luxembourgish (lb) ...
- DateTime::Locale::lb_LU (3)
- Locale data examples for the Luxembourgish Luxe...
- DateTime::Locale::lb_LU (3pm)
- Locale data examples for the Luxembourgish Lu...
- DateTime::Locale::lg (3)
- Locale data examples for the Ganda (lg) locale
- DateTime::Locale::lg (3pm)
- Locale data examples for the Ganda (lg) locale
- DateTime::Locale::lg_UG (3)
- Locale data examples for the Ganda Uganda (lg-U...
- DateTime::Locale::lg_UG (3pm)
- Locale data examples for the Ganda Uganda (lg...
- DateTime::Locale::lkt (3)
- Locale data examples for the Lakota (lkt) locale
- DateTime::Locale::lkt (3pm)
- Locale data examples for the Lakota (lkt) locale
- DateTime::Locale::lkt_US (3)
- Locale data examples for the Lakota United Sta...
- DateTime::Locale::lkt_US (3pm)
- Locale data examples for the Lakota United S...
- DateTime::Locale::ln (3)
- Locale data examples for the Lingala (ln) locale
- DateTime::Locale::ln (3pm)
- Locale data examples for the Lingala (ln) locale
- DateTime::Locale::ln_AO (3)
- Locale data examples for the Lingala Angola (ln...
- DateTime::Locale::ln_AO (3pm)
- Locale data examples for the Lingala Angola (...
- DateTime::Locale::ln_CD (3)
- Locale data examples for the Lingala Congo - Ki...
- DateTime::Locale::ln_CD (3pm)
- Locale data examples for the Lingala Congo - ...
- DateTime::Locale::ln_CF (3)
- Locale data examples for the Lingala Central Af...
- DateTime::Locale::ln_CF (3pm)
- Locale data examples for the Lingala Central ...
- DateTime::Locale::ln_CG (3)
- Locale data examples for the Lingala Congo - Br...
- DateTime::Locale::ln_CG (3pm)
- Locale data examples for the Lingala Congo - ...
- DateTime::Locale::lo (3)
- Locale data examples for the Lao (lo) locale
- DateTime::Locale::lo (3pm)
- Locale data examples for the Lao (lo) locale
- DateTime::Locale::lo_LA (3)
- Locale data examples for the Lao Laos (lo-LA) l...
- DateTime::Locale::lo_LA (3pm)
- Locale data examples for the Lao Laos (lo-LA)...
- DateTime::Locale::lrc (3)
- Locale data examples for the Northern Luri (lrc) ...
- DateTime::Locale::lrc (3pm)
- Locale data examples for the Northern Luri (lrc...
- DateTime::Locale::lrc_IQ (3)
- Locale data examples for the Northern Luri Ira...
- DateTime::Locale::lrc_IQ (3pm)
- Locale data examples for the Northern Luri I...
- DateTime::Locale::lrc_IR (3)
- Locale data examples for the Northern Luri Ira...
- DateTime::Locale::lrc_IR (3pm)
- Locale data examples for the Northern Luri I...
- DateTime::Locale::lt (3)
- Locale data examples for the Lithuanian (lt) locale
- DateTime::Locale::lt (3pm)
- Locale data examples for the Lithuanian (lt) locale
- DateTime::Locale::lt_LT (3)
- Locale data examples for the Lithuanian Lithuan...
- DateTime::Locale::lt_LT (3pm)
- Locale data examples for the Lithuanian Lithu...
- DateTime::Locale::lu (3)
- Locale data examples for the Luba-Katanga (lu) locale
- DateTime::Locale::lu (3pm)
- Locale data examples for the Luba-Katanga (lu) l...
- DateTime::Locale::lu_CD (3)
- Locale data examples for the Luba-Katanga Congo...
- DateTime::Locale::lu_CD (3pm)
- Locale data examples for the Luba-Katanga Con...
- DateTime::Locale::luo (3)
- Locale data examples for the Luo (luo) locale
- DateTime::Locale::luo (3pm)
- Locale data examples for the Luo (luo) locale
- DateTime::Locale::luo_KE (3)
- Locale data examples for the Luo Kenya (luo-KE...
- DateTime::Locale::luo_KE (3pm)
- Locale data examples for the Luo Kenya (luo-...
- DateTime::Locale::luy (3)
- Locale data examples for the Luyia (luy) locale
- DateTime::Locale::luy (3pm)
- Locale data examples for the Luyia (luy) locale
- DateTime::Locale::luy_KE (3)
- Locale data examples for the Luyia Kenya (luy-...
- DateTime::Locale::luy_KE (3pm)
- Locale data examples for the Luyia Kenya (lu...
- DateTime::Locale::lv (3)
- Locale data examples for the Latvian (lv) locale
- DateTime::Locale::lv (3pm)
- Locale data examples for the Latvian (lv) locale
- DateTime::Locale::lv_LV (3)
- Locale data examples for the Latvian Latvia (lv...
- DateTime::Locale::lv_LV (3pm)
- Locale data examples for the Latvian Latvia (...
- DateTime::Locale::mai (3)
- Locale data examples for the Maithili (mai) locale
- DateTime::Locale::mai (3pm)
- Locale data examples for the Maithili (mai) locale
- DateTime::Locale::mai_IN (3)
- Locale data examples for the Maithili India (m...
- DateTime::Locale::mai_IN (3pm)
- Locale data examples for the Maithili India ...
- DateTime::Locale::mas (3)
- Locale data examples for the Masai (mas) locale
- DateTime::Locale::mas (3pm)
- Locale data examples for the Masai (mas) locale
- DateTime::Locale::mas_KE (3)
- Locale data examples for the Masai Kenya (mas-...
- DateTime::Locale::mas_KE (3pm)
- Locale data examples for the Masai Kenya (ma...
- DateTime::Locale::mas_TZ (3)
- Locale data examples for the Masai Tanzania (m...
- DateTime::Locale::mas_TZ (3pm)
- Locale data examples for the Masai Tanzania ...
- DateTime::Locale::mdf (3)
- Locale data examples for the Moksha (mdf) locale
- DateTime::Locale::mdf (3pm)
- Locale data examples for the Moksha (mdf) locale
- DateTime::Locale::mdf_RU (3)
- Locale data examples for the Moksha Russia (md...
- DateTime::Locale::mdf_RU (3pm)
- Locale data examples for the Moksha Russia (...
- DateTime::Locale::mer (3)
- Locale data examples for the Meru (mer) locale
- DateTime::Locale::mer (3pm)
- Locale data examples for the Meru (mer) locale
- DateTime::Locale::mer_KE (3)
- Locale data examples for the Meru Kenya (mer-K...
- DateTime::Locale::mer_KE (3pm)
- Locale data examples for the Meru Kenya (mer...
- DateTime::Locale::mfe (3)
- Locale data examples for the Morisyen (mfe) locale
- DateTime::Locale::mfe (3pm)
- Locale data examples for the Morisyen (mfe) locale
- DateTime::Locale::mfe_MU (3)
- Locale data examples for the Morisyen Mauritiu...
- DateTime::Locale::mfe_MU (3pm)
- Locale data examples for the Morisyen Maurit...
- DateTime::Locale::mg (3)
- Locale data examples for the Malagasy (mg) locale
- DateTime::Locale::mg (3pm)
- Locale data examples for the Malagasy (mg) locale
- DateTime::Locale::mg_MG (3)
- Locale data examples for the Malagasy Madagasca...
- DateTime::Locale::mg_MG (3pm)
- Locale data examples for the Malagasy Madagas...
- DateTime::Locale::mgh (3)
- Locale data examples for the Makhuwa-Meetto (mgh)...
- DateTime::Locale::mgh (3pm)
- Locale data examples for the Makhuwa-Meetto (mg...
- DateTime::Locale::mgh_MZ (3)
- Locale data examples for the Makhuwa-Meetto Mo...
- DateTime::Locale::mgh_MZ (3pm)
- Locale data examples for the Makhuwa-Meetto ...
- DateTime::Locale::mgo (3)
- Locale data examples for the Meta (mgo) locale
- DateTime::Locale::mgo (3pm)
- Locale data examples for the MetaX (mgo) locale
- DateTime::Locale::mgo_CM (3)
- Locale data examples for the Meta Cameroon (...
- DateTime::Locale::mgo_CM (3pm)
- Locale data examples for the MetaX Cameroon ...
- DateTime::Locale::mi (3)
- Locale data examples for the Mori (mi) locale
- DateTime::Locale::mi (3pm)
- Locale data examples for the MXori (mi) locale
- DateTime::Locale::mi_NZ (3)
- Locale data examples for the Mori New Zealand...
- DateTime::Locale::mi_NZ (3pm)
- Locale data examples for the MXori New Zealan...
- DateTime::Locale::mk (3)
- Locale data examples for the Macedonian (mk) locale
- DateTime::Locale::mk (3pm)
- Locale data examples for the Macedonian (mk) locale
- DateTime::Locale::mk_MK (3)
- Locale data examples for the Macedonian North M...
- DateTime::Locale::mk_MK (3pm)
- Locale data examples for the Macedonian North...
- DateTime::Locale::ml (3)
- Locale data examples for the Malayalam (ml) locale
- DateTime::Locale::ml (3pm)
- Locale data examples for the Malayalam (ml) locale
- DateTime::Locale::ml_IN (3)
- Locale data examples for the Malayalam India (m...
- DateTime::Locale::ml_IN (3pm)
- Locale data examples for the Malayalam India ...
- DateTime::Locale::mn (3)
- Locale data examples for the Mongolian (mn) locale
- DateTime::Locale::mn (3pm)
- Locale data examples for the Mongolian (mn) locale
- DateTime::Locale::mn_MN (3)
- Locale data examples for the Mongolian Mongolia...
- DateTime::Locale::mn_MN (3pm)
- Locale data examples for the Mongolian Mongol...
- DateTime::Locale::mni (3)
- Locale data examples for the Manipuri (mni) locale
- DateTime::Locale::mni (3pm)
- Locale data examples for the Manipuri (mni) locale
- DateTime::Locale::mni_Beng (3)
- Locale data examples for the Manipuri Bangla...
- DateTime::Locale::mni_Beng (3pm)
- Locale data examples for the Manipuri Bang...
- DateTime::Locale::mni_Beng_IN (3)
- Locale data examples for the Manipuri Ind...
- DateTime::Locale::mni_Beng_IN (3pm)
- Locale data examples for the Manipuri I...
- DateTime::Locale::mr (3)
- Locale data examples for the Marathi (mr) locale
- DateTime::Locale::mr (3pm)
- Locale data examples for the Marathi (mr) locale
- DateTime::Locale::mr_IN (3)
- Locale data examples for the Marathi India (mr-...
- DateTime::Locale::mr_IN (3pm)
- Locale data examples for the Marathi India (m...
- DateTime::Locale::ms (3)
- Locale data examples for the Malay (ms) locale
- DateTime::Locale::ms (3pm)
- Locale data examples for the Malay (ms) locale
- DateTime::Locale::ms_BN (3)
- Locale data examples for the Malay Brunei (ms-B...
- DateTime::Locale::ms_BN (3pm)
- Locale data examples for the Malay Brunei (ms...
- DateTime::Locale::ms_ID (3)
- Locale data examples for the Malay Indonesia (m...
- DateTime::Locale::ms_ID (3pm)
- Locale data examples for the Malay Indonesia ...
- DateTime::Locale::ms_MY (3)
- Locale data examples for the Malay Malaysia (ms...
- DateTime::Locale::ms_MY (3pm)
- Locale data examples for the Malay Malaysia (...
- DateTime::Locale::ms_SG (3)
- Locale data examples for the Malay Singapore (m...
- DateTime::Locale::ms_SG (3pm)
- Locale data examples for the Malay Singapore ...
- DateTime::Locale::mt (3)
- Locale data examples for the Maltese (mt) locale
- DateTime::Locale::mt (3pm)
- Locale data examples for the Maltese (mt) locale
- DateTime::Locale::mt_MT (3)
- Locale data examples for the Maltese Malta (mt-...
- DateTime::Locale::mt_MT (3pm)
- Locale data examples for the Maltese Malta (m...
- DateTime::Locale::mua (3)
- Locale data examples for the Mundang (mua) locale
- DateTime::Locale::mua (3pm)
- Locale data examples for the Mundang (mua) locale
- DateTime::Locale::mua_CM (3)
- Locale data examples for the Mundang Cameroon ...
- DateTime::Locale::mua_CM (3pm)
- Locale data examples for the Mundang Cameroo...
- DateTime::Locale::my (3)
- Locale data examples for the Burmese (my) locale
- DateTime::Locale::my (3pm)
- Locale data examples for the Burmese (my) locale
- DateTime::Locale::my_MM (3)
- Locale data examples for the Burmese Myanmar (B...
- DateTime::Locale::my_MM (3pm)
- Locale data examples for the Burmese Myanmar ...
- DateTime::Locale::mzn (3)
- Locale data examples for the Mazanderani (mzn) lo...
- DateTime::Locale::mzn (3pm)
- Locale data examples for the Mazanderani (mzn) ...
- DateTime::Locale::mzn_IR (3)
- Locale data examples for the Mazanderani Iran ...
- DateTime::Locale::mzn_IR (3pm)
- Locale data examples for the Mazanderani Ira...
- DateTime::Locale::naq (3)
- Locale data examples for the Nama (naq) locale
- DateTime::Locale::naq (3pm)
- Locale data examples for the Nama (naq) locale
- DateTime::Locale::naq_NA (3)
- Locale data examples for the Nama Namibia (naq...
- DateTime::Locale::naq_NA (3pm)
- Locale data examples for the Nama Namibia (n...
- DateTime::Locale::nb (3)
- Locale data examples for the Norwegian Bokml (nb...
- DateTime::Locale::nb (3pm)
- Locale data examples for the Norwegian Bokmal (n...
- DateTime::Locale::nb_NO (3)
- Locale data examples for the Norwegian Bokml ...
- DateTime::Locale::nb_NO (3pm)
- Locale data examples for the Norwegian Bokmal...
- DateTime::Locale::nb_SJ (3)
- Locale data examples for the Norwegian Bokml ...
- DateTime::Locale::nb_SJ (3pm)
- Locale data examples for the Norwegian Bokmal...
- DateTime::Locale::nd (3)
- Locale data examples for the North Ndebele (nd) lo...
- DateTime::Locale::nd (3pm)
- Locale data examples for the North Ndebele (nd) ...
- DateTime::Locale::nd_ZW (3)
- Locale data examples for the North Ndebele Zimb...
- DateTime::Locale::nd_ZW (3pm)
- Locale data examples for the North Ndebele Zi...
- DateTime::Locale::nds (3)
- Locale data examples for the Low German (nds) locale
- DateTime::Locale::nds (3pm)
- Locale data examples for the Low German (nds) l...
- DateTime::Locale::nds_DE (3)
- Locale data examples for the Low German German...
- DateTime::Locale::nds_DE (3pm)
- Locale data examples for the Low German Germ...
- DateTime::Locale::nds_NL (3)
- Locale data examples for the Low German Nether...
- DateTime::Locale::nds_NL (3pm)
- Locale data examples for the Low German Neth...
- DateTime::Locale::ne (3)
- Locale data examples for the Nepali (ne) locale
- DateTime::Locale::ne (3pm)
- Locale data examples for the Nepali (ne) locale
- DateTime::Locale::ne_IN (3)
- Locale data examples for the Nepali India (ne-I...
- DateTime::Locale::ne_IN (3pm)
- Locale data examples for the Nepali India (ne...
- DateTime::Locale::ne_NP (3)
- Locale data examples for the Nepali Nepal (ne-N...
- DateTime::Locale::ne_NP (3pm)
- Locale data examples for the Nepali Nepal (ne...
- DateTime::Locale::nl (3)
- Locale data examples for the Dutch (nl) locale
- DateTime::Locale::nl (3pm)
- Locale data examples for the Dutch (nl) locale
- DateTime::Locale::nl_AW (3)
- Locale data examples for the Dutch Aruba (nl-AW...
- DateTime::Locale::nl_AW (3pm)
- Locale data examples for the Dutch Aruba (nl-...
- DateTime::Locale::nl_BE (3)
- Locale data examples for the Dutch Belgium (nl-...
- DateTime::Locale::nl_BE (3pm)
- Locale data examples for the Dutch Belgium (n...
- DateTime::Locale::nl_BQ (3)
- Locale data examples for the Dutch Caribbean Ne...
- DateTime::Locale::nl_BQ (3pm)
- Locale data examples for the Dutch Caribbean ...
- DateTime::Locale::nl_CW (3)
- Locale data examples for the Dutch Curaao (nl...
- DateTime::Locale::nl_CW (3pm)
- Locale data examples for the Dutch Curacao (n...
- DateTime::Locale::nl_NL (3)
- Locale data examples for the Dutch Netherlands ...
- DateTime::Locale::nl_NL (3pm)
- Locale data examples for the Dutch Netherland...
- DateTime::Locale::nl_SR (3)
- Locale data examples for the Dutch Suriname (nl...
- DateTime::Locale::nl_SR (3pm)
- Locale data examples for the Dutch Suriname (...
- DateTime::Locale::nl_SX (3)
- Locale data examples for the Dutch Sint Maarten...
- DateTime::Locale::nl_SX (3pm)
- Locale data examples for the Dutch Sint Maart...
- DateTime::Locale::nmg (3)
- Locale data examples for the Kwasio (nmg) locale
- DateTime::Locale::nmg (3pm)
- Locale data examples for the Kwasio (nmg) locale
- DateTime::Locale::nmg_CM (3)
- Locale data examples for the Kwasio Cameroon (...
- DateTime::Locale::nmg_CM (3pm)
- Locale data examples for the Kwasio Cameroon...
- DateTime::Locale::nn (3)
- Locale data examples for the Norwegian Nynorsk (nn...
- DateTime::Locale::nn (3pm)
- Locale data examples for the Norwegian Nynorsk (...
- DateTime::Locale::nn_NO (3)
- Locale data examples for the Norwegian Nynorsk ...
- DateTime::Locale::nn_NO (3pm)
- Locale data examples for the Norwegian Nynors...
- DateTime::Locale::nnh (3)
- Locale data examples for the Ngiemboon (nnh) locale
- DateTime::Locale::nnh (3pm)
- Locale data examples for the Ngiemboon (nnh) lo...
- DateTime::Locale::nnh_CM (3)
- Locale data examples for the Ngiemboon Cameroo...
- DateTime::Locale::nnh_CM (3pm)
- Locale data examples for the Ngiemboon Camer...
- DateTime::Locale::no (3)
- Locale data examples for the Norwegian (no) locale
- DateTime::Locale::no (3pm)
- Locale data examples for the Norwegian (no) locale
- DateTime::Locale::nus (3)
- Locale data examples for the Nuer (nus) locale
- DateTime::Locale::nus (3pm)
- Locale data examples for the Nuer (nus) locale
- DateTime::Locale::nus_SS (3)
- Locale data examples for the Nuer South Sudan ...
- DateTime::Locale::nus_SS (3pm)
- Locale data examples for the Nuer South Suda...
- DateTime::Locale::nyn (3)
- Locale data examples for the Nyankole (nyn) locale
- DateTime::Locale::nyn (3pm)
- Locale data examples for the Nyankole (nyn) locale
- DateTime::Locale::nyn_UG (3)
- Locale data examples for the Nyankole Uganda (...
- DateTime::Locale::nyn_UG (3pm)
- Locale data examples for the Nyankole Uganda...
- DateTime::Locale::oc (3)
- Locale data examples for the Occitan (oc) locale
- DateTime::Locale::oc (3pm)
- Locale data examples for the Occitan (oc) locale
- DateTime::Locale::oc_ES (3)
- Locale data examples for the Occitan Spain (oc-...
- DateTime::Locale::oc_ES (3pm)
- Locale data examples for the Occitan Spain (o...
- DateTime::Locale::oc_FR (3)
- Locale data examples for the Occitan France (oc...
- DateTime::Locale::oc_FR (3pm)
- Locale data examples for the Occitan France (...
- DateTime::Locale::om (3)
- Locale data examples for the Oromo (om) locale
- DateTime::Locale::om (3pm)
- Locale data examples for the Oromo (om) locale
- DateTime::Locale::om_ET (3)
- Locale data examples for the Oromo Ethiopia (om...
- DateTime::Locale::om_ET (3pm)
- Locale data examples for the Oromo Ethiopia (...
- DateTime::Locale::om_KE (3)
- Locale data examples for the Oromo Kenya (om-KE...
- DateTime::Locale::om_KE (3pm)
- Locale data examples for the Oromo Kenya (om-...
- DateTime::Locale::or (3)
- Locale data examples for the Odia (or) locale
- DateTime::Locale::or (3pm)
- Locale data examples for the Odia (or) locale
- DateTime::Locale::or_IN (3)
- Locale data examples for the Odia India (or-IN)...
- DateTime::Locale::or_IN (3pm)
- Locale data examples for the Odia India (or-I...
- DateTime::Locale::os (3)
- Locale data examples for the Ossetic (os) locale
- DateTime::Locale::os (3pm)
- Locale data examples for the Ossetic (os) locale
- DateTime::Locale::os_GE (3)
- Locale data examples for the Ossetic Georgia (o...
- DateTime::Locale::os_GE (3pm)
- Locale data examples for the Ossetic Georgia ...
- DateTime::Locale::os_RU (3)
- Locale data examples for the Ossetic Russia (os...
- DateTime::Locale::os_RU (3pm)
- Locale data examples for the Ossetic Russia (...
- DateTime::Locale::pa (3)
- Locale data examples for the Punjabi (pa) locale
- DateTime::Locale::pa (3pm)
- Locale data examples for the Punjabi (pa) locale
- DateTime::Locale::pa_Arab (3)
- Locale data examples for the Punjabi Arabic (...
- DateTime::Locale::pa_Arab (3pm)
- Locale data examples for the Punjabi Arabic...
- DateTime::Locale::pa_Arab_PK (3)
- Locale data examples for the Punjabi Pakis...
- DateTime::Locale::pa_Arab_PK (3pm)
- Locale data examples for the Punjabi Pak...
- DateTime::Locale::pa_Guru (3)
- Locale data examples for the Punjabi Gurmukhi...
- DateTime::Locale::pa_Guru (3pm)
- Locale data examples for the Punjabi Gurmuk...
- DateTime::Locale::pa_Guru_IN (3)
- Locale data examples for the Punjabi India...
- DateTime::Locale::pa_Guru_IN (3pm)
- Locale data examples for the Punjabi Ind...
- DateTime::Locale::pcm (3)
- Locale data examples for the Nigerian Pidgin (pcm...
- DateTime::Locale::pcm (3pm)
- Locale data examples for the Nigerian Pidgin (p...
- DateTime::Locale::pcm_NG (3)
- Locale data examples for the Nigerian Pidgin N...
- DateTime::Locale::pcm_NG (3pm)
- Locale data examples for the Nigerian Pidgin...
- DateTime::Locale::pis (3)
- Locale data examples for the Pijin (pis) locale
- DateTime::Locale::pis (3pm)
- Locale data examples for the Pijin (pis) locale
- DateTime::Locale::pis_SB (3)
- Locale data examples for the Pijin Solomon Isl...
- DateTime::Locale::pis_SB (3pm)
- Locale data examples for the Pijin Solomon I...
- DateTime::Locale::pl (3)
- Locale data examples for the Polish (pl) locale
- DateTime::Locale::pl (3pm)
- Locale data examples for the Polish (pl) locale
- DateTime::Locale::pl_PL (3)
- Locale data examples for the Polish Poland (pl-...
- DateTime::Locale::pl_PL (3pm)
- Locale data examples for the Polish Poland (p...
- DateTime::Locale::ps (3)
- Locale data examples for the Pashto (ps) locale
- DateTime::Locale::ps (3pm)
- Locale data examples for the Pashto (ps) locale
- DateTime::Locale::ps_AF (3)
- Locale data examples for the Pashto Afghanistan...
- DateTime::Locale::ps_AF (3pm)
- Locale data examples for the Pashto Afghanist...
- DateTime::Locale::ps_PK (3)
- Locale data examples for the Pashto Pakistan (p...
- DateTime::Locale::ps_PK (3pm)
- Locale data examples for the Pashto Pakistan ...
- DateTime::Locale::pt (3)
- Locale data examples for the Portuguese (pt) locale
- DateTime::Locale::pt (3pm)
- Locale data examples for the Portuguese (pt) locale
- DateTime::Locale::pt_AO (3)
- Locale data examples for the Portuguese Angola ...
- DateTime::Locale::pt_AO (3pm)
- Locale data examples for the Portuguese Angol...
- DateTime::Locale::pt_BR (3)
- Locale data examples for the Portuguese Brazil ...
- DateTime::Locale::pt_BR (3pm)
- Locale data examples for the Portuguese Brazi...
- DateTime::Locale::pt_CH (3)
- Locale data examples for the Portuguese Switzer...
- DateTime::Locale::pt_CH (3pm)
- Locale data examples for the Portuguese Switz...
- DateTime::Locale::pt_CV (3)
- Locale data examples for the Portuguese Cape Ve...
- DateTime::Locale::pt_CV (3pm)
- Locale data examples for the Portuguese Cape ...
- DateTime::Locale::pt_GQ (3)
- Locale data examples for the Portuguese Equator...
- DateTime::Locale::pt_GQ (3pm)
- Locale data examples for the Portuguese Equat...
- DateTime::Locale::pt_GW (3)
- Locale data examples for the Portuguese Guinea-...
- DateTime::Locale::pt_GW (3pm)
- Locale data examples for the Portuguese Guine...
- DateTime::Locale::pt_LU (3)
- Locale data examples for the Portuguese Luxembo...
- DateTime::Locale::pt_LU (3pm)
- Locale data examples for the Portuguese Luxem...
- DateTime::Locale::pt_MO (3)
- Locale data examples for the Portuguese Macao S...
- DateTime::Locale::pt_MO (3pm)
- Locale data examples for the Portuguese Macao...
- DateTime::Locale::pt_MZ (3)
- Locale data examples for the Portuguese Mozambi...
- DateTime::Locale::pt_MZ (3pm)
- Locale data examples for the Portuguese Mozam...
- DateTime::Locale::pt_PT (3)
- Locale data examples for the Portuguese Portuga...
- DateTime::Locale::pt_PT (3pm)
- Locale data examples for the Portuguese Portu...
- DateTime::Locale::pt_ST (3)
- Locale data examples for the Portuguese So To...
- DateTime::Locale::pt_ST (3pm)
- Locale data examples for the Portuguese Sao T...
- DateTime::Locale::pt_TL (3)
- Locale data examples for the Portuguese Timor-L...
- DateTime::Locale::pt_TL (3pm)
- Locale data examples for the Portuguese Timor...
- DateTime::Locale::qu (3)
- Locale data examples for the Quechua (qu) locale
- DateTime::Locale::qu (3pm)
- Locale data examples for the Quechua (qu) locale
- DateTime::Locale::qu_BO (3)
- Locale data examples for the Quechua Bolivia (q...
- DateTime::Locale::qu_BO (3pm)
- Locale data examples for the Quechua Bolivia ...
- DateTime::Locale::qu_EC (3)
- Locale data examples for the Quechua Ecuador (q...
- DateTime::Locale::qu_EC (3pm)
- Locale data examples for the Quechua Ecuador ...
- DateTime::Locale::qu_PE (3)
- Locale data examples for the Quechua Peru (qu-P...
- DateTime::Locale::qu_PE (3pm)
- Locale data examples for the Quechua Peru (qu...
- DateTime::Locale::raj (3)
- Locale data examples for the Rajasthani (raj) locale
- DateTime::Locale::raj (3pm)
- Locale data examples for the Rajasthani (raj) l...
- DateTime::Locale::raj_IN (3)
- Locale data examples for the Rajasthani India ...
- DateTime::Locale::raj_IN (3pm)
- Locale data examples for the Rajasthani Indi...
- DateTime::Locale::rm (3)
- Locale data examples for the Romansh (rm) locale
- DateTime::Locale::rm (3pm)
- Locale data examples for the Romansh (rm) locale
- DateTime::Locale::rm_CH (3)
- Locale data examples for the Romansh Switzerlan...
- DateTime::Locale::rm_CH (3pm)
- Locale data examples for the Romansh Switzerl...
- DateTime::Locale::rn (3)
- Locale data examples for the Rundi (rn) locale
- DateTime::Locale::rn (3pm)
- Locale data examples for the Rundi (rn) locale
- DateTime::Locale::rn_BI (3)
- Locale data examples for the Rundi Burundi (rn-...
- DateTime::Locale::rn_BI (3pm)
- Locale data examples for the Rundi Burundi (r...
- DateTime::Locale::ro (3)
- Locale data examples for the Romanian (ro) locale
- DateTime::Locale::ro (3pm)
- Locale data examples for the Romanian (ro) locale
- DateTime::Locale::ro_MD (3)
- Locale data examples for the Romanian Moldova (...
- DateTime::Locale::ro_MD (3pm)
- Locale data examples for the Romanian Moldova...
- DateTime::Locale::ro_RO (3)
- Locale data examples for the Romanian Romania (...
- DateTime::Locale::ro_RO (3pm)
- Locale data examples for the Romanian Romania...
- DateTime::Locale::rof (3)
- Locale data examples for the Rombo (rof) locale
- DateTime::Locale::rof (3pm)
- Locale data examples for the Rombo (rof) locale
- DateTime::Locale::rof_TZ (3)
- Locale data examples for the Rombo Tanzania (r...
- DateTime::Locale::rof_TZ (3pm)
- Locale data examples for the Rombo Tanzania ...
- DateTime::Locale::ru (3)
- Locale data examples for the Russian (ru) locale
- DateTime::Locale::ru (3pm)
- Locale data examples for the Russian (ru) locale
- DateTime::Locale::ru_BY (3)
- Locale data examples for the Russian Belarus (r...
- DateTime::Locale::ru_BY (3pm)
- Locale data examples for the Russian Belarus ...
- DateTime::Locale::ru_KG (3)
- Locale data examples for the Russian Kyrgyzstan...
- DateTime::Locale::ru_KG (3pm)
- Locale data examples for the Russian Kyrgyzst...
- DateTime::Locale::ru_KZ (3)
- Locale data examples for the Russian Kazakhstan...
- DateTime::Locale::ru_KZ (3pm)
- Locale data examples for the Russian Kazakhst...
- DateTime::Locale::ru_MD (3)
- Locale data examples for the Russian Moldova (r...
- DateTime::Locale::ru_MD (3pm)
- Locale data examples for the Russian Moldova ...
- DateTime::Locale::ru_RU (3)
- Locale data examples for the Russian Russia (ru...
- DateTime::Locale::ru_RU (3pm)
- Locale data examples for the Russian Russia (...
- DateTime::Locale::ru_UA (3)
- Locale data examples for the Russian Ukraine (r...
- DateTime::Locale::ru_UA (3pm)
- Locale data examples for the Russian Ukraine ...
- DateTime::Locale::rw (3)
- Locale data examples for the Kinyarwanda (rw) locale
- DateTime::Locale::rw (3pm)
- Locale data examples for the Kinyarwanda (rw) lo...
- DateTime::Locale::rw_RW (3)
- Locale data examples for the Kinyarwanda Rwanda...
- DateTime::Locale::rw_RW (3pm)
- Locale data examples for the Kinyarwanda Rwan...
- DateTime::Locale::rwk (3)
- Locale data examples for the Rwa (rwk) locale
- DateTime::Locale::rwk (3pm)
- Locale data examples for the Rwa (rwk) locale
- DateTime::Locale::rwk_TZ (3)
- Locale data examples for the Rwa Tanzania (rwk...
- DateTime::Locale::rwk_TZ (3pm)
- Locale data examples for the Rwa Tanzania (r...
- DateTime::Locale::sa (3)
- Locale data examples for the Sanskrit (sa) locale
- DateTime::Locale::sa (3pm)
- Locale data examples for the Sanskrit (sa) locale
- DateTime::Locale::sa_IN (3)
- Locale data examples for the Sanskrit India (sa...
- DateTime::Locale::sa_IN (3pm)
- Locale data examples for the Sanskrit India (...
- DateTime::Locale::sah (3)
- Locale data examples for the Yakut (sah) locale
- DateTime::Locale::sah (3pm)
- Locale data examples for the Yakut (sah) locale
- DateTime::Locale::sah_RU (3)
- Locale data examples for the Yakut Russia (sah...
- DateTime::Locale::sah_RU (3pm)
- Locale data examples for the Yakut Russia (s...
- DateTime::Locale::saq (3)
- Locale data examples for the Samburu (saq) locale
- DateTime::Locale::saq (3pm)
- Locale data examples for the Samburu (saq) locale
- DateTime::Locale::saq_KE (3)
- Locale data examples for the Samburu Kenya (sa...
- DateTime::Locale::saq_KE (3pm)
- Locale data examples for the Samburu Kenya (...
- DateTime::Locale::sat (3)
- Locale data examples for the Santali (sat) locale
- DateTime::Locale::sat (3pm)
- Locale data examples for the Santali (sat) locale
- DateTime::Locale::sat_Olck (3)
- Locale data examples for the Santali Ol Chik...
- DateTime::Locale::sat_Olck (3pm)
- Locale data examples for the Santali Ol Ch...
- DateTime::Locale::sat_Olck_IN (3)
- Locale data examples for the Santali Indi...
- DateTime::Locale::sat_Olck_IN (3pm)
- Locale data examples for the Santali In...
- DateTime::Locale::sbp (3)
- Locale data examples for the Sangu (sbp) locale
- DateTime::Locale::sbp (3pm)
- Locale data examples for the Sangu (sbp) locale
- DateTime::Locale::sbp_TZ (3)
- Locale data examples for the Sangu Tanzania (s...
- DateTime::Locale::sbp_TZ (3pm)
- Locale data examples for the Sangu Tanzania ...
- DateTime::Locale::sc (3)
- Locale data examples for the Sardinian (sc) locale
- DateTime::Locale::sc (3pm)
- Locale data examples for the Sardinian (sc) locale
- DateTime::Locale::sc_IT (3)
- Locale data examples for the Sardinian Italy (s...
- DateTime::Locale::sc_IT (3pm)
- Locale data examples for the Sardinian Italy ...
- DateTime::Locale::sd (3)
- Locale data examples for the Sindhi (sd) locale
- DateTime::Locale::sd (3pm)
- Locale data examples for the Sindhi (sd) locale
- DateTime::Locale::sd_Arab (3)
- Locale data examples for the Sindhi Arabic (s...
- DateTime::Locale::sd_Arab (3pm)
- Locale data examples for the Sindhi Arabic ...
- DateTime::Locale::sd_Arab_PK (3)
- Locale data examples for the Sindhi Pakist...
- DateTime::Locale::sd_Arab_PK (3pm)
- Locale data examples for the Sindhi Paki...
- DateTime::Locale::sd_Deva (3)
- Locale data examples for the Sindhi Devanagar...
- DateTime::Locale::sd_Deva (3pm)
- Locale data examples for the Sindhi Devanag...
- DateTime::Locale::sd_Deva_IN (3)
- Locale data examples for the Sindhi India ...
- DateTime::Locale::sd_Deva_IN (3pm)
- Locale data examples for the Sindhi Indi...
- DateTime::Locale::se (3)
- Locale data examples for the Northern Sami (se) lo...
- DateTime::Locale::se (3pm)
- Locale data examples for the Northern Sami (se) ...
- DateTime::Locale::se_FI (3)
- Locale data examples for the Northern Sami Finl...
- DateTime::Locale::se_FI (3pm)
- Locale data examples for the Northern Sami Fi...
- DateTime::Locale::se_NO (3)
- Locale data examples for the Northern Sami Norw...
- DateTime::Locale::se_NO (3pm)
- Locale data examples for the Northern Sami No...
- DateTime::Locale::se_SE (3)
- Locale data examples for the Northern Sami Swed...
- DateTime::Locale::se_SE (3pm)
- Locale data examples for the Northern Sami Sw...
- DateTime::Locale::seh (3)
- Locale data examples for the Sena (seh) locale
- DateTime::Locale::seh (3pm)
- Locale data examples for the Sena (seh) locale
- DateTime::Locale::seh_MZ (3)
- Locale data examples for the Sena Mozambique (...
- DateTime::Locale::seh_MZ (3pm)
- Locale data examples for the Sena Mozambique...
- DateTime::Locale::ses (3)
- Locale data examples for the Koyraboro Senni (ses...
- DateTime::Locale::ses (3pm)
- Locale data examples for the Koyraboro Senni (s...
- DateTime::Locale::ses_ML (3)
- Locale data examples for the Koyraboro Senni M...
- DateTime::Locale::ses_ML (3pm)
- Locale data examples for the Koyraboro Senni...
- DateTime::Locale::sg (3)
- Locale data examples for the Sango (sg) locale
- DateTime::Locale::sg (3pm)
- Locale data examples for the Sango (sg) locale
- DateTime::Locale::sg_CF (3)
- Locale data examples for the Sango Central Afri...
- DateTime::Locale::sg_CF (3pm)
- Locale data examples for the Sango Central Af...
- DateTime::Locale::shi (3)
- Locale data examples for the Tachelhit (shi) locale
- DateTime::Locale::shi (3pm)
- Locale data examples for the Tachelhit (shi) lo...
- DateTime::Locale::shi_Latn (3)
- Locale data examples for the Tachelhit Latin...
- DateTime::Locale::shi_Latn (3pm)
- Locale data examples for the Tachelhit Lat...
- DateTime::Locale::shi_Latn_MA (3)
- Locale data examples for the Tachelhit Mo...
- DateTime::Locale::shi_Latn_MA (3pm)
- Locale data examples for the Tachelhit ...
- DateTime::Locale::shi_Tfng (3)
- Locale data examples for the Tachelhit Tifin...
- DateTime::Locale::shi_Tfng (3pm)
- Locale data examples for the Tachelhit Tif...
- DateTime::Locale::shi_Tfng_MA (3)
- Locale data examples for the Tachelhit Mo...
- DateTime::Locale::shi_Tfng_MA (3pm)
- Locale data examples for the Tachelhit ...
- DateTime::Locale::si (3)
- Locale data examples for the Sinhala (si) locale
- DateTime::Locale::si (3pm)
- Locale data examples for the Sinhala (si) locale
- DateTime::Locale::si_LK (3)
- Locale data examples for the Sinhala Sri Lanka ...
- DateTime::Locale::si_LK (3pm)
- Locale data examples for the Sinhala Sri Lank...
- DateTime::Locale::sk (3)
- Locale data examples for the Slovak (sk) locale
- DateTime::Locale::sk (3pm)
- Locale data examples for the Slovak (sk) locale
- DateTime::Locale::sk_SK (3)
- Locale data examples for the Slovak Slovakia (s...
- DateTime::Locale::sk_SK (3pm)
- Locale data examples for the Slovak Slovakia ...
- DateTime::Locale::sl (3)
- Locale data examples for the Slovenian (sl) locale
- DateTime::Locale::sl (3pm)
- Locale data examples for the Slovenian (sl) locale
- DateTime::Locale::sl_SI (3)
- Locale data examples for the Slovenian Slovenia...
- DateTime::Locale::sl_SI (3pm)
- Locale data examples for the Slovenian Sloven...
- DateTime::Locale::smn (3)
- Locale data examples for the Inari Sami (smn) locale
- DateTime::Locale::smn (3pm)
- Locale data examples for the Inari Sami (smn) l...
- DateTime::Locale::smn_FI (3)
- Locale data examples for the Inari Sami Finlan...
- DateTime::Locale::smn_FI (3pm)
- Locale data examples for the Inari Sami Finl...
- DateTime::Locale::sms (3)
- Locale data examples for the Skolt Sami (sms) locale
- DateTime::Locale::sms (3pm)
- Locale data examples for the Skolt Sami (sms) l...
- DateTime::Locale::sms_FI (3)
- Locale data examples for the Skolt Sami Finlan...
- DateTime::Locale::sms_FI (3pm)
- Locale data examples for the Skolt Sami Finl...
- DateTime::Locale::sn (3)
- Locale data examples for the Shona (sn) locale
- DateTime::Locale::sn (3pm)
- Locale data examples for the Shona (sn) locale
- DateTime::Locale::sn_ZW (3)
- Locale data examples for the Shona Zimbabwe (sn...
- DateTime::Locale::sn_ZW (3pm)
- Locale data examples for the Shona Zimbabwe (...
- DateTime::Locale::so (3)
- Locale data examples for the Somali (so) locale
- DateTime::Locale::so (3pm)
- Locale data examples for the Somali (so) locale
- DateTime::Locale::so_DJ (3)
- Locale data examples for the Somali Djibouti (s...
- DateTime::Locale::so_DJ (3pm)
- Locale data examples for the Somali Djibouti ...
- DateTime::Locale::so_ET (3)
- Locale data examples for the Somali Ethiopia (s...
- DateTime::Locale::so_ET (3pm)
- Locale data examples for the Somali Ethiopia ...
- DateTime::Locale::so_KE (3)
- Locale data examples for the Somali Kenya (so-K...
- DateTime::Locale::so_KE (3pm)
- Locale data examples for the Somali Kenya (so...
- DateTime::Locale::so_SO (3)
- Locale data examples for the Somali Somalia (so...
- DateTime::Locale::so_SO (3pm)
- Locale data examples for the Somali Somalia (...
- DateTime::Locale::sq (3)
- Locale data examples for the Albanian (sq) locale
- DateTime::Locale::sq (3pm)
- Locale data examples for the Albanian (sq) locale
- DateTime::Locale::sq_AL (3)
- Locale data examples for the Albanian Albania (...
- DateTime::Locale::sq_AL (3pm)
- Locale data examples for the Albanian Albania...
- DateTime::Locale::sq_MK (3)
- Locale data examples for the Albanian North Mac...
- DateTime::Locale::sq_MK (3pm)
- Locale data examples for the Albanian North M...
- DateTime::Locale::sq_XK (3)
- Locale data examples for the Albanian Kosovo (s...
- DateTime::Locale::sq_XK (3pm)
- Locale data examples for the Albanian Kosovo ...
- DateTime::Locale::sr (3)
- Locale data examples for the Serbian (sr) locale
- DateTime::Locale::sr (3pm)
- Locale data examples for the Serbian (sr) locale
- DateTime::Locale::sr_Cyrl (3)
- Locale data examples for the Serbian Cyrillic...
- DateTime::Locale::sr_Cyrl (3pm)
- Locale data examples for the Serbian Cyrill...
- DateTime::Locale::sr_Cyrl_BA (3)
- Locale data examples for the Serbian Bosni...
- DateTime::Locale::sr_Cyrl_BA (3pm)
- Locale data examples for the Serbian Bos...
- DateTime::Locale::sr_Cyrl_ME (3)
- Locale data examples for the Serbian Monte...
- DateTime::Locale::sr_Cyrl_ME (3pm)
- Locale data examples for the Serbian Mon...
- DateTime::Locale::sr_Cyrl_RS (3)
- Locale data examples for the Serbian Serbi...
- DateTime::Locale::sr_Cyrl_RS (3pm)
- Locale data examples for the Serbian Ser...
- DateTime::Locale::sr_Cyrl_XK (3)
- Locale data examples for the Serbian Kosov...
- DateTime::Locale::sr_Cyrl_XK (3pm)
- Locale data examples for the Serbian Kos...
- DateTime::Locale::sr_Latn (3)
- Locale data examples for the Serbian Latin (s...
- DateTime::Locale::sr_Latn (3pm)
- Locale data examples for the Serbian Latin ...
- DateTime::Locale::sr_Latn_BA (3)
- Locale data examples for the Serbian Bosni...
- DateTime::Locale::sr_Latn_BA (3pm)
- Locale data examples for the Serbian Bos...
- DateTime::Locale::sr_Latn_ME (3)
- Locale data examples for the Serbian Monte...
- DateTime::Locale::sr_Latn_ME (3pm)
- Locale data examples for the Serbian Mon...
- DateTime::Locale::sr_Latn_RS (3)
- Locale data examples for the Serbian Serbi...
- DateTime::Locale::sr_Latn_RS (3pm)
- Locale data examples for the Serbian Ser...
- DateTime::Locale::sr_Latn_XK (3)
- Locale data examples for the Serbian Kosov...
- DateTime::Locale::sr_Latn_XK (3pm)
- Locale data examples for the Serbian Kos...
- DateTime::Locale::su (3)
- Locale data examples for the Sundanese (su) locale
- DateTime::Locale::su (3pm)
- Locale data examples for the Sundanese (su) locale
- DateTime::Locale::su_Latn (3)
- Locale data examples for the Sundanese Latin ...
- DateTime::Locale::su_Latn (3pm)
- Locale data examples for the Sundanese Lati...
- DateTime::Locale::su_Latn_ID (3)
- Locale data examples for the Sundanese Ind...
- DateTime::Locale::su_Latn_ID (3pm)
- Locale data examples for the Sundanese I...
- DateTime::Locale::sv (3)
- Locale data examples for the Swedish (sv) locale
- DateTime::Locale::sv (3pm)
- Locale data examples for the Swedish (sv) locale
- DateTime::Locale::sv_AX (3)
- Locale data examples for the Swedish land Isl...
- DateTime::Locale::sv_AX (3pm)
- Locale data examples for the Swedish Aland Is...
- DateTime::Locale::sv_FI (3)
- Locale data examples for the Swedish Finland (s...
- DateTime::Locale::sv_FI (3pm)
- Locale data examples for the Swedish Finland ...
- DateTime::Locale::sv_SE (3)
- Locale data examples for the Swedish Sweden (sv...
- DateTime::Locale::sv_SE (3pm)
- Locale data examples for the Swedish Sweden (...
- DateTime::Locale::sw (3)
- Locale data examples for the Swahili (sw) locale
- DateTime::Locale::sw (3pm)
- Locale data examples for the Swahili (sw) locale
- DateTime::Locale::sw_CD (3)
- Locale data examples for the Swahili Congo - Ki...
- DateTime::Locale::sw_CD (3pm)
- Locale data examples for the Swahili Congo - ...
- DateTime::Locale::sw_KE (3)
- Locale data examples for the Swahili Kenya (sw-...
- DateTime::Locale::sw_KE (3pm)
- Locale data examples for the Swahili Kenya (s...
- DateTime::Locale::sw_TZ (3)
- Locale data examples for the Swahili Tanzania (...
- DateTime::Locale::sw_TZ (3pm)
- Locale data examples for the Swahili Tanzania...
- DateTime::Locale::sw_UG (3)
- Locale data examples for the Swahili Uganda (sw...
- DateTime::Locale::sw_UG (3pm)
- Locale data examples for the Swahili Uganda (...
- DateTime::Locale::ta (3)
- Locale data examples for the Tamil (ta) locale
- DateTime::Locale::ta (3pm)
- Locale data examples for the Tamil (ta) locale
- DateTime::Locale::ta_IN (3)
- Locale data examples for the Tamil India (ta-IN...
- DateTime::Locale::ta_IN (3pm)
- Locale data examples for the Tamil India (ta-...
- DateTime::Locale::ta_LK (3)
- Locale data examples for the Tamil Sri Lanka (t...
- DateTime::Locale::ta_LK (3pm)
- Locale data examples for the Tamil Sri Lanka ...
- DateTime::Locale::ta_MY (3)
- Locale data examples for the Tamil Malaysia (ta...
- DateTime::Locale::ta_MY (3pm)
- Locale data examples for the Tamil Malaysia (...
- DateTime::Locale::ta_SG (3)
- Locale data examples for the Tamil Singapore (t...
- DateTime::Locale::ta_SG (3pm)
- Locale data examples for the Tamil Singapore ...
- DateTime::Locale::te (3)
- Locale data examples for the Telugu (te) locale
- DateTime::Locale::te (3pm)
- Locale data examples for the Telugu (te) locale
- DateTime::Locale::te_IN (3)
- Locale data examples for the Telugu India (te-I...
- DateTime::Locale::te_IN (3pm)
- Locale data examples for the Telugu India (te...
- DateTime::Locale::teo (3)
- Locale data examples for the Teso (teo) locale
- DateTime::Locale::teo (3pm)
- Locale data examples for the Teso (teo) locale
- DateTime::Locale::teo_KE (3)
- Locale data examples for the Teso Kenya (teo-K...
- DateTime::Locale::teo_KE (3pm)
- Locale data examples for the Teso Kenya (teo...
- DateTime::Locale::teo_UG (3)
- Locale data examples for the Teso Uganda (teo-...
- DateTime::Locale::teo_UG (3pm)
- Locale data examples for the Teso Uganda (te...
- DateTime::Locale::tg (3)
- Locale data examples for the Tajik (tg) locale
- DateTime::Locale::tg (3pm)
- Locale data examples for the Tajik (tg) locale
- DateTime::Locale::tg_TJ (3)
- Locale data examples for the Tajik Tajikistan (...
- DateTime::Locale::tg_TJ (3pm)
- Locale data examples for the Tajik Tajikistan...
- DateTime::Locale::th (3)
- Locale data examples for the Thai (th) locale
- DateTime::Locale::th (3pm)
- Locale data examples for the Thai (th) locale
- DateTime::Locale::th_TH (3)
- Locale data examples for the Thai Thailand (th-...
- DateTime::Locale::th_TH (3pm)
- Locale data examples for the Thai Thailand (t...
- DateTime::Locale::ti (3)
- Locale data examples for the Tigrinya (ti) locale
- DateTime::Locale::ti (3pm)
- Locale data examples for the Tigrinya (ti) locale
- DateTime::Locale::ti_ER (3)
- Locale data examples for the Tigrinya Eritrea (...
- DateTime::Locale::ti_ER (3pm)
- Locale data examples for the Tigrinya Eritrea...
- DateTime::Locale::ti_ET (3)
- Locale data examples for the Tigrinya Ethiopia ...
- DateTime::Locale::ti_ET (3pm)
- Locale data examples for the Tigrinya Ethiopi...
- DateTime::Locale::tk (3)
- Locale data examples for the Turkmen (tk) locale
- DateTime::Locale::tk (3pm)
- Locale data examples for the Turkmen (tk) locale
- DateTime::Locale::tk_TM (3)
- Locale data examples for the Turkmen Turkmenist...
- DateTime::Locale::tk_TM (3pm)
- Locale data examples for the Turkmen Turkmeni...
- DateTime::Locale::to (3)
- Locale data examples for the Tongan (to) locale
- DateTime::Locale::to (3pm)
- Locale data examples for the Tongan (to) locale
- DateTime::Locale::to_TO (3)
- Locale data examples for the Tongan Tonga (to-T...
- DateTime::Locale::to_TO (3pm)
- Locale data examples for the Tongan Tonga (to...
- DateTime::Locale::tok (3)
- Locale data examples for the Toki Pona (tok) locale
- DateTime::Locale::tok (3pm)
- Locale data examples for the Toki Pona (tok) lo...
- DateTime::Locale::tok_001 (3)
- Locale data examples for the Toki Pona world ...
- DateTime::Locale::tok_001 (3pm)
- Locale data examples for the Toki Pona worl...
- DateTime::Locale::tr (3)
- Locale data examples for the Turkish (tr) locale
- DateTime::Locale::tr (3pm)
- Locale data examples for the Turkish (tr) locale
- DateTime::Locale::tr_CY (3)
- Locale data examples for the Turkish Cyprus (tr...
- DateTime::Locale::tr_CY (3pm)
- Locale data examples for the Turkish Cyprus (...
- DateTime::Locale::tr_TR (3)
- Locale data examples for the Turkish Trkiye (...
- DateTime::Locale::tr_TR (3pm)
- Locale data examples for the Turkish Turkey (...
- DateTime::Locale::tt (3)
- Locale data examples for the Tatar (tt) locale
- DateTime::Locale::tt (3pm)
- Locale data examples for the Tatar (tt) locale
- DateTime::Locale::tt_RU (3)
- Locale data examples for the Tatar Russia (tt-R...
- DateTime::Locale::tt_RU (3pm)
- Locale data examples for the Tatar Russia (tt...
- DateTime::Locale::twq (3)
- Locale data examples for the Tasawaq (twq) locale
- DateTime::Locale::twq (3pm)
- Locale data examples for the Tasawaq (twq) locale
- DateTime::Locale::twq_NE (3)
- Locale data examples for the Tasawaq Niger (tw...
- DateTime::Locale::twq_NE (3pm)
- Locale data examples for the Tasawaq Niger (...
- DateTime::Locale::tzm (3)
- Locale data examples for the Central Atlas Tamazi...
- DateTime::Locale::tzm (3pm)
- Locale data examples for the Central Atlas Tama...
- DateTime::Locale::tzm_MA (3)
- Locale data examples for the Central Atlas Tam...
- DateTime::Locale::tzm_MA (3pm)
- Locale data examples for the Central Atlas T...
- DateTime::Locale::ug (3)
- Locale data examples for the Uyghur (ug) locale
- DateTime::Locale::ug (3pm)
- Locale data examples for the Uyghur (ug) locale
- DateTime::Locale::ug_CN (3)
- Locale data examples for the Uyghur China (ug-C...
- DateTime::Locale::ug_CN (3pm)
- Locale data examples for the Uyghur China (ug...
- DateTime::Locale::uk (3)
- Locale data examples for the Ukrainian (uk) locale
- DateTime::Locale::uk (3pm)
- Locale data examples for the Ukrainian (uk) locale
- DateTime::Locale::uk_UA (3)
- Locale data examples for the Ukrainian Ukraine ...
- DateTime::Locale::uk_UA (3pm)
- Locale data examples for the Ukrainian Ukrain...
- DateTime::Locale::und (3)
- Locale data examples for the Unknown language (un...
- DateTime::Locale::und (3pm)
- Locale data examples for the Unknown language (...
- DateTime::Locale::ur (3)
- Locale data examples for the Urdu (ur) locale
- DateTime::Locale::ur (3pm)
- Locale data examples for the Urdu (ur) locale
- DateTime::Locale::ur_IN (3)
- Locale data examples for the Urdu India (ur-IN)...
- DateTime::Locale::ur_IN (3pm)
- Locale data examples for the Urdu India (ur-I...
- DateTime::Locale::ur_PK (3)
- Locale data examples for the Urdu Pakistan (ur-...
- DateTime::Locale::ur_PK (3pm)
- Locale data examples for the Urdu Pakistan (u...
- DateTime::Locale::uz (3)
- Locale data examples for the Uzbek (uz) locale
- DateTime::Locale::uz (3pm)
- Locale data examples for the Uzbek (uz) locale
- DateTime::Locale::uz_Arab (3)
- Locale data examples for the Uzbek Arabic (uz...
- DateTime::Locale::uz_Arab (3pm)
- Locale data examples for the Uzbek Arabic (...
- DateTime::Locale::uz_Arab_AF (3)
- Locale data examples for the Uzbek Afghani...
- DateTime::Locale::uz_Arab_AF (3pm)
- Locale data examples for the Uzbek Afgha...
- DateTime::Locale::uz_Cyrl (3)
- Locale data examples for the Uzbek Cyrillic (...
- DateTime::Locale::uz_Cyrl (3pm)
- Locale data examples for the Uzbek Cyrillic...
- DateTime::Locale::uz_Cyrl_UZ (3)
- Locale data examples for the Uzbek Uzbekis...
- DateTime::Locale::uz_Cyrl_UZ (3pm)
- Locale data examples for the Uzbek Uzbek...
- DateTime::Locale::uz_Latn (3)
- Locale data examples for the Uzbek Latin (uz-...
- DateTime::Locale::uz_Latn (3pm)
- Locale data examples for the Uzbek Latin (u...
- DateTime::Locale::uz_Latn_UZ (3)
- Locale data examples for the Uzbek Uzbekis...
- DateTime::Locale::uz_Latn_UZ (3pm)
- Locale data examples for the Uzbek Uzbek...
- DateTime::Locale::vai (3)
- Locale data examples for the Vai (vai) locale
- DateTime::Locale::vai (3pm)
- Locale data examples for the Vai (vai) locale
- DateTime::Locale::vai_Latn (3)
- Locale data examples for the Vai Latin (vai-...
- DateTime::Locale::vai_Latn (3pm)
- Locale data examples for the Vai Latin (va...
- DateTime::Locale::vai_Latn_LR (3)
- Locale data examples for the Vai Liberia ...
- DateTime::Locale::vai_Latn_LR (3pm)
- Locale data examples for the Vai Liberi...
- DateTime::Locale::vai_Vaii (3)
- Locale data examples for the Vai Vai (vai-Va...
- DateTime::Locale::vai_Vaii (3pm)
- Locale data examples for the Vai Vai (vai-...
- DateTime::Locale::vai_Vaii_LR (3)
- Locale data examples for the Vai Liberia ...
- DateTime::Locale::vai_Vaii_LR (3pm)
- Locale data examples for the Vai Liberi...
- DateTime::Locale::vi (3)
- Locale data examples for the Vietnamese (vi) locale
- DateTime::Locale::vi (3pm)
- Locale data examples for the Vietnamese (vi) locale
- DateTime::Locale::vi_VN (3)
- Locale data examples for the Vietnamese Vietnam...
- DateTime::Locale::vi_VN (3pm)
- Locale data examples for the Vietnamese Vietn...
- DateTime::Locale::vun (3)
- Locale data examples for the Vunjo (vun) locale
- DateTime::Locale::vun (3pm)
- Locale data examples for the Vunjo (vun) locale
- DateTime::Locale::vun_TZ (3)
- Locale data examples for the Vunjo Tanzania (v...
- DateTime::Locale::vun_TZ (3pm)
- Locale data examples for the Vunjo Tanzania ...
- DateTime::Locale::wae (3)
- Locale data examples for the Walser (wae) locale
- DateTime::Locale::wae (3pm)
- Locale data examples for the Walser (wae) locale
- DateTime::Locale::wae_CH (3)
- Locale data examples for the Walser Switzerlan...
- DateTime::Locale::wae_CH (3pm)
- Locale data examples for the Walser Switzerl...
- DateTime::Locale::wo (3)
- Locale data examples for the Wolof (wo) locale
- DateTime::Locale::wo (3pm)
- Locale data examples for the Wolof (wo) locale
- DateTime::Locale::wo_SN (3)
- Locale data examples for the Wolof Senegal (wo-...
- DateTime::Locale::wo_SN (3pm)
- Locale data examples for the Wolof Senegal (w...
- DateTime::Locale::xh (3)
- Locale data examples for the Xhosa (xh) locale
- DateTime::Locale::xh (3pm)
- Locale data examples for the Xhosa (xh) locale
- DateTime::Locale::xh_ZA (3)
- Locale data examples for the Xhosa South Africa...
- DateTime::Locale::xh_ZA (3pm)
- Locale data examples for the Xhosa South Afri...
- DateTime::Locale::xog (3)
- Locale data examples for the Soga (xog) locale
- DateTime::Locale::xog (3pm)
- Locale data examples for the Soga (xog) locale
- DateTime::Locale::xog_UG (3)
- Locale data examples for the Soga Uganda (xog-...
- DateTime::Locale::xog_UG (3pm)
- Locale data examples for the Soga Uganda (xo...
- DateTime::Locale::yav (3)
- Locale data examples for the Yangben (yav) locale
- DateTime::Locale::yav (3pm)
- Locale data examples for the Yangben (yav) locale
- DateTime::Locale::yav_CM (3)
- Locale data examples for the Yangben Cameroon ...
- DateTime::Locale::yav_CM (3pm)
- Locale data examples for the Yangben Cameroo...
- DateTime::Locale::yi (3)
- Locale data examples for the Yiddish (yi) locale
- DateTime::Locale::yi (3pm)
- Locale data examples for the Yiddish (yi) locale
- DateTime::Locale::yi_001 (3)
- Locale data examples for the Yiddish world (yi...
- DateTime::Locale::yi_001 (3pm)
- Locale data examples for the Yiddish world (...
- DateTime::Locale::yo (3)
- Locale data examples for the Yoruba (yo) locale
- DateTime::Locale::yo (3pm)
- Locale data examples for the Yoruba (yo) locale
- DateTime::Locale::yo_BJ (3)
- Locale data examples for the Yoruba Benin (yo-B...
- DateTime::Locale::yo_BJ (3pm)
- Locale data examples for the Yoruba Benin (yo...
- DateTime::Locale::yo_NG (3)
- Locale data examples for the Yoruba Nigeria (yo...
- DateTime::Locale::yo_NG (3pm)
- Locale data examples for the Yoruba Nigeria (...
- DateTime::Locale::yrl (3)
- Locale data examples for the Nheengatu (yrl) locale
- DateTime::Locale::yrl (3pm)
- Locale data examples for the Nheengatu (yrl) lo...
- DateTime::Locale::yrl_BR (3)
- Locale data examples for the Nheengatu Brazil ...
- DateTime::Locale::yrl_BR (3pm)
- Locale data examples for the Nheengatu Brazi...
- DateTime::Locale::yrl_CO (3)
- Locale data examples for the Nheengatu Colombi...
- DateTime::Locale::yrl_CO (3pm)
- Locale data examples for the Nheengatu Colom...
- DateTime::Locale::yrl_VE (3)
- Locale data examples for the Nheengatu Venezue...
- DateTime::Locale::yrl_VE (3pm)
- Locale data examples for the Nheengatu Venez...
- DateTime::Locale::yue (3)
- Locale data examples for the Cantonese (yue) locale
- DateTime::Locale::yue (3pm)
- Locale data examples for the Cantonese (yue) lo...
- DateTime::Locale::yue_Hans (3)
- Locale data examples for the Cantonese Simpl...
- DateTime::Locale::yue_Hans (3pm)
- Locale data examples for the Cantonese Sim...
- DateTime::Locale::yue_Hans_CN (3)
- Locale data examples for the Cantonese Ch...
- DateTime::Locale::yue_Hans_CN (3pm)
- Locale data examples for the Cantonese ...
- DateTime::Locale::yue_Hant (3)
- Locale data examples for the Cantonese Tradi...
- DateTime::Locale::yue_Hant (3pm)
- Locale data examples for the Cantonese Tra...
- DateTime::Locale::yue_Hant_HK (3)
- Locale data examples for the Cantonese Ho...
- DateTime::Locale::yue_Hant_HK (3pm)
- Locale data examples for the Cantonese ...
- DateTime::Locale::zgh (3)
- Locale data examples for the Standard Moroccan Ta...
- DateTime::Locale::zgh (3pm)
- Locale data examples for the Standard Moroccan ...
- DateTime::Locale::zgh_MA (3)
- Locale data examples for the Standard Moroccan...
- DateTime::Locale::zgh_MA (3pm)
- Locale data examples for the Standard Morocc...
- DateTime::Locale::zh (3)
- Locale data examples for the Chinese (zh) locale
- DateTime::Locale::zh (3pm)
- Locale data examples for the Chinese (zh) locale
- DateTime::Locale::zh_Hans (3)
- Locale data examples for the Chinese Simplifi...
- DateTime::Locale::zh_Hans (3pm)
- Locale data examples for the Chinese Simpli...
- DateTime::Locale::zh_Hans_CN (3)
- Locale data examples for the Chinese China...
- DateTime::Locale::zh_Hans_CN (3pm)
- Locale data examples for the Chinese Chi...
- DateTime::Locale::zh_Hans_HK (3)
- Locale data examples for the Chinese Hong ...
- DateTime::Locale::zh_Hans_HK (3pm)
- Locale data examples for the Chinese Hon...
- DateTime::Locale::zh_Hans_MO (3)
- Locale data examples for the Chinese Macao...
- DateTime::Locale::zh_Hans_MO (3pm)
- Locale data examples for the Chinese Mac...
- DateTime::Locale::zh_Hans_SG (3)
- Locale data examples for the Chinese Singa...
- DateTime::Locale::zh_Hans_SG (3pm)
- Locale data examples for the Chinese Sin...
- DateTime::Locale::zh_Hant (3)
- Locale data examples for the Chinese Traditio...
- DateTime::Locale::zh_Hant (3pm)
- Locale data examples for the Chinese Tradit...
- DateTime::Locale::zh_Hant_HK (3)
- Locale data examples for the Chinese Hong ...
- DateTime::Locale::zh_Hant_HK (3pm)
- Locale data examples for the Chinese Hon...
- DateTime::Locale::zh_Hant_MO (3)
- Locale data examples for the Chinese Macao...
- DateTime::Locale::zh_Hant_MO (3pm)
- Locale data examples for the Chinese Mac...
- DateTime::Locale::zh_Hant_TW (3)
- Locale data examples for the Chinese Taiwa...
- DateTime::Locale::zh_Hant_TW (3pm)
- Locale data examples for the Chinese Tai...
- DateTime::Locale::zu (3)
- Locale data examples for the Zulu (zu) locale
- DateTime::Locale::zu (3pm)
- Locale data examples for the Zulu (zu) locale
- DateTime::Locale::zu_ZA (3)
- Locale data examples for the Zulu South Africa ...
- DateTime::Locale::zu_ZA (3pm)
- Locale data examples for the Zulu South Afric...
- DateTime::TimeZone::Floating (3)
- A time zone that is always local
- DateTime::TimeZone::Floating (3pm)
- A time zone that is always local
- DateTime::TimeZone::Local (3)
- Determine the local system's time zone
- DateTime::TimeZone::Local (3pm)
- Determine the local system's time zone
- DateTime::TimeZone::Local::Unix (3)
- Determine the local system's time zone ...
- DateTime::TimeZone::Local::Unix (3pm)
- Determine the local system's time zon...
- DateTime::TimeZone::Local::VMS (3)
- Determine the local system's time zone o...
- DateTime::TimeZone::Local::VMS (3pm)
- Determine the local system's time zone...
- DateTime::TimeZone::OffsetOnly (3)
- A DateTime::TimeZone object that just co...
- DateTime::TimeZone::OffsetOnly (3pm)
- A DateTime::TimeZone object that just ...
- DateTime::TimeZone::UTC (3)
- The UTC time zone
- DateTime::TimeZone::UTC (3pm)
- The UTC time zone
- DateTime::Types (3)
- Types used for parameter checking in DateTime
- DateTime::Types (3pm)
- Types used for parameter checking in DateTime
- Devel::CheckLib (3)
- check that a library is available
- Devel::CheckLib (3pm)
- check that a library is available
- Devel::GlobalDestruction (3)
- Provides function returning the equivalent of ...
- Devel::GlobalDestruction (3pm)
- Provides function returning the equivalent o...
- Devel::Hide (3)
- Forces the unavailability of specified Perl modules (f...
- Devel::Hide (3pm)
- Forces the unavailability of specified Perl modules (f...
- Devel::InnerPackage (3)
- find all the inner packages of a package
- Devel::InnerPackage (3pm)
- find all the inner packages of a package
- Devel::Symdump (3)
- dump symbol names or the symbol table
- Devel::Symdump (3pm)
- dump symbol names or the symbol table
- Digest::HMAC (3)
- Keyed-Hashing for Message Authentication
- Digest::HMAC (3pm)
- Keyed-Hashing for Message Authentication
- Digest::HMAC_MD5 (3)
- Keyed-Hashing for Message Authentication
- Digest::HMAC_MD5 (3pm)
- Keyed-Hashing for Message Authentication
- Digest::HMAC_SHA1 (3)
- Keyed-Hashing for Message Authentication
- Digest::HMAC_SHA1 (3pm)
- Keyed-Hashing for Message Authentication
- Digest::MD5 (3)
- Perl interface to the MD5 Algorithm
- Digest::MD5 (3pm)
- Perl interface to the MD5 Algorithm
- Digest::SHA (3)
- Perl extension for SHA-1/224/256/384/512
- Digest::SHA (3pm)
- Perl extension for SHA-1/224/256/384/512
- Digest::SHA1 (3)
- Perl interface to the SHA-1 algorithm
- Digest::SHA1 (3pm)
- Perl interface to the SHA-1 algorithm
- Dist::CheckConflicts (3)
- declare version conflicts for your dist
- Dist::CheckConflicts (3pm)
- declare version conflicts for your dist
- END (7pg161)
- commit the current transaction
- EVP_RAND (7osslssl-3)
- the random bit generator
- XML::XPath::Node::Element (3)
- an <element>
- XML::XPath::Node::Element (3pm)
- an <element>
- Email::MIME (3)
- easy MIME message handling
- Email::MIME (3pm)
- easy MIME message handling
- Email::MIME::Creator (3)
- obsolete do-nothing library
- Email::MIME::Creator (3pm)
- obsolete do-nothing library
- Email::MIME::Encode (3)
- a private helper for MIME header encoding
- Email::MIME::Encode (3pm)
- a private helper for MIME header encoding
- Email::MIME::Header (3)
- the header of a MIME message
- Email::MIME::Header (3pm)
- the header of a MIME message
- Email::MIME::Header::AddressList (3)
- MIME support for list of Email::Addres...
- Email::MIME::Header::AddressList (3pm)
- MIME support for list of Email::Addr...
- Email::MIME::Modifier (3)
- obsolete do-nothing library
- Email::MIME::Modifier (3pm)
- obsolete do-nothing library
- Email::Simple (3)
- simple parsing of RFC2822 message format and headers
- Email::Simple (3pm)
- simple parsing of RFC2822 message format and headers
- Email::Simple::Creator (3)
- private helper for building Email::Simple objects
- Email::Simple::Creator (3pm)
- private helper for building Email::Simple objects
- Email::Simple::Header (3)
- the header of an Email::Simple message
- Email::Simple::Header (3pm)
- the header of an Email::Simple message
- Encode (3)
- character encodings in Perl
- Encode (3pm)
- character encodings in Perl
- Encode::CN::HZ (3)
- - internally used by Encode::CN
- Encode::CN::HZ (3pm)
- - internally used by Encode::CN
- Encode::Detect (3)
- An Encode::Encoding subclass that detects the encoding...
- Encode::Detect (3pm)
- An Encode::Encoding subclass that detects the encoding...
- Encode::Detect::Detector (3)
- Detects the encoding of data
- Encode::Detect::Detector (3pm)
- Detects the encoding of data
- Encode::JP::H2Z (3)
- - internally used by Encode::JP::2022_JP*
- Encode::JP::H2Z (3pm)
- - internally used by Encode::JP::2022_JP*
- Encode::Locale (3)
- Determine the locale encoding
- Encode::Locale (3pm)
- Determine the locale encoding
- Encode::MIME::Header (3)
- - MIME encoding for an unstructured email header
- Encode::MIME::Header (3pm)
- - MIME encoding for an unstructured email header
- English (3)
- use nice English (or awk) names for ugly punctuation v...
- Env (3)
- perl module that imports environment variables as scal...
- Error (3)
- Error/exception handling in an OO-ish way
- Error (3pm)
- Error/exception handling in an OO-ish way
- Error::Simple (3)
- the simple error sub-class of Error
- Error::Simple (3pm)
- the simple error sub-class of Error
- eruption (6x)
- eruption of pieces of hot volcanic rock
- Exception::Class (3)
- A module that allows you to declare real exception cla...
- Exception::Class (3pm)
- A module that allows you to declare real exception c...
- Exporter::Shiny (3)
- shortcut for Exporter::Tiny
- Exporter::Shiny (3pm)
- shortcut for Exporter::Tiny
- Exporter::Tiny (3)
- an exporter with the features of Sub::Exporter but onl...
- Exporter::Tiny (3pm)
- an exporter with the features of Sub::Exporter but onl...
- Exporter::Tiny::Manual::QuickStart (3)
- the quickest way to get up and runni...
- Exporter::Tiny::Manual::QuickStart (3pm)
- the quickest way to get up and run...
- ExtUtils::Command::MM (3)
- Commands for the MM's to use in Makefiles
- ExtUtils::Command::MM (3pm)
- Commands for the MM's to use in Makefiles
- ExtUtils::Depends (3)
- Easily build XS extensions that depend on XS extensions
- ExtUtils::Depends (3pm)
- Easily build XS extensions that depend on XS extens...
- ExtUtils::Install (3)
- install files from here to there
- ExtUtils::Install (3pm)
- install files from here to there
- ExtUtils::Liblist (3)
- determine libraries to use and how to use them
- ExtUtils::Liblist (3pm)
- determine libraries to use and how to use them
- ExtUtils::MM_Any (3)
- Platform-agnostic MM methods
- ExtUtils::MM_Any (3pm)
- Platform-agnostic MM methods
- ExtUtils::MM_BeOS (3)
- methods to override UN*X behaviour in ExtUtils::MakeM...
- ExtUtils::MM_BeOS (3pm)
- methods to override UN*X behaviour in ExtUtils::Mak...
- ExtUtils::MM_Cygwin (3)
- methods to override UN*X behaviour in ExtUtils::Mak...
- ExtUtils::MM_Cygwin (3pm)
- methods to override UN*X behaviour in ExtUtils::M...
- ExtUtils::MM_Darwin (3)
- special behaviors for OS X
- ExtUtils::MM_Darwin (3pm)
- special behaviors for OS X
- ExtUtils::MM_NW5 (3)
- methods to override UN*X behaviour in ExtUtils::MakeMaker
- ExtUtils::MM_NW5 (3pm)
- methods to override UN*X behaviour in ExtUtils::Make...
- ExtUtils::MM_OS2 (3)
- methods to override UN*X behaviour in ExtUtils::MakeMaker
- ExtUtils::MM_OS2 (3pm)
- methods to override UN*X behaviour in ExtUtils::Make...
- ExtUtils::MM_Unix (3)
- methods used by ExtUtils::MakeMaker
- ExtUtils::MM_Unix (3pm)
- methods used by ExtUtils::MakeMaker
- ExtUtils::MM_VMS (3)
- methods to override UN*X behaviour in ExtUtils::MakeMaker
- ExtUtils::MM_VMS (3pm)
- methods to override UN*X behaviour in ExtUtils::Make...
- ExtUtils::MM_Win32 (3)
- methods to override UN*X behaviour in ExtUtils::Make...
- ExtUtils::MM_Win32 (3pm)
- methods to override UN*X behaviour in ExtUtils::Ma...
- ExtUtils::MM_Win95 (3)
- method to customize MakeMaker for Win9X
- ExtUtils::MM_Win95 (3pm)
- method to customize MakeMaker for Win9X
- ExtUtils::MakeMaker::Tutorial (3)
- Writing a module with MakeMaker
- ExtUtils::MakeMaker::Tutorial (3pm)
- Writing a module with MakeMaker
- ExtUtils::Manifest (3)
- Utilities to write and check a MANIFEST file
- ExtUtils::Manifest (3pm)
- utilities to write and check a MANIFEST file
- _newselect (2)
- synchronous I/O multiplexing
- FD_CLR (3)
- synchronous I/O multiplexing
- FD_CLR (3p)
- macros for synchronous I/O multiplexing
- FD_ISSET (3)
- synchronous I/O multiplexing
- FD_SET (3)
- synchronous I/O multiplexing
- FD_ZERO (3)
- synchronous I/O multiplexing
- figlet (6)
- display large characters made up of ordinary screen ch...
- Fcntl (3)
- load the C Fcntl.h defines
- File::ShareDir (3)
- Locate per-dist and per-module shared files
- File::ShareDir (3pm)
- Locate per-dist and per-module shared files
- File::ShareDir::Install (3)
- Install shared files
- File::ShareDir::Install (3pm)
- Install shared files
- File::Which (3)
- Perl implementation of the which utility as an API
- File::Which (3pm)
- Perl implementation of the which utility as an API
- FileHandle::Unget (3)
- FileHandle which supports multi-byte unget
- FileHandle::Unget (3pm)
- FileHandle which supports multi-byte unget
- gdbm (3)
- The GNU database manager. Includes dbm and ndbm compat...
- Git (3pm)
- Perl interface to the Git version control system
- haproxy (1)
- fast and reliable http reverse proxy and load balancer
- HTML::Entities (3)
- Encode or decode strings with HTML entities
- HTML::Entities (3pm)
- Encode or decode strings with HTML entities
- HTML::Filter (3)
- Filter HTML text through the parser
- HTML::Filter (3pm)
- Filter HTML text through the parser
- HTML::HeadParser (3)
- Parse <HEAD> section of a HTML document
- HTML::HeadParser (3pm)
- Parse <HEAD> section of a HTML document
- HTML::LinkExtor (3)
- Extract links from an HTML document
- HTML::LinkExtor (3pm)
- Extract links from an HTML document
- HTML::Parser (3)
- HTML parser class
- HTML::Parser (3pm)
- HTML parser class
- HTML::PullParser (3)
- Alternative HTML::Parser interface
- HTML::PullParser (3pm)
- Alternative HTML::Parser interface
- HTML::Tagset (3)
- data tables useful in parsing HTML
- HTML::Tagset (3pm)
- data tables useful in parsing HTML
- HTML::TokeParser (3)
- Alternative HTML::Parser interface
- HTML::TokeParser (3pm)
- Alternative HTML::Parser interface
- HTTP::Config (3)
- Configuration for request and response objects
- HTTP::Config (3pm)
- Configuration for request and response objects
- HTTP::CookieJar (3)
- A minimalist HTTP user agent cookie jar
- HTTP::CookieJar (3pm)
- A minimalist HTTP user agent cookie jar
- HTTP::CookieJar::LWP (3)
- LWP adapter for HTTP::CookieJar
- HTTP::CookieJar::LWP (3pm)
- LWP adapter for HTTP::CookieJar
- HTTP::Cookies (3)
- HTTP cookie jars
- HTTP::Cookies (3pm)
- HTTP cookie jars
- HTTP::Cookies::Microsoft (3)
- Access to Microsoft cookies files
- HTTP::Cookies::Microsoft (3pm)
- access to Microsoft cookies files
- HTTP::Cookies::Netscape (3)
- Access to Netscape cookies files
- HTTP::Cookies::Netscape (3pm)
- access to Netscape cookies files
- HTTP::Daemon (3)
- A simple http server class
- HTTP::Daemon (3pm)
- a simple http server class
- HTTP::Date (3)
- HTTP::Date - date conversion routines
- HTTP::Date (3pm)
- date conversion routines
- HTTP::Headers (3)
- Class encapsulating HTTP Message headers
- HTTP::Headers (3pm)
- Class encapsulating HTTP Message headers
- HTTP::Headers::Util (3)
- Header value parsing utility functions
- HTTP::Headers::Util (3pm)
- Header value parsing utility functions
- HTTP::Message (3)
- HTTP style message (base class)
- HTTP::Message (3pm)
- HTTP style message (base class)
- HTTP::Negotiate (3)
- choose a variant to serve
- HTTP::Negotiate (3pm)
- choose a variant to serve
- HTTP::Request (3)
- HTTP style request message
- HTTP::Request (3pm)
- HTTP style request message
- HTTP::Request::Common (3)
- Construct common HTTP::Request objects
- HTTP::Request::Common (3pm)
- Construct common HTTP::Request objects
- HTTP::Response (3)
- HTTP style response message
- HTTP::Response (3pm)
- HTTP style response message
- HTTP::Status (3)
- HTTP Status code processing
- HTTP::Status (3pm)
- HTTP Status code processing
- HTTP::Tiny (3)
- A small, simple, correct HTTP/1.1 client
- HTTP::Tiny (3pm)
- A small, simple, correct HTTP/1.1 client
- Mail::SpamAssassin::Plugin::HashBL (3)
- query hashed (and unhashed) DNS bloc...
- Mail::SpamAssassin::Plugin::HashBL (3pm)
- seearch email addresses in HashBL ...
- Hook::LexWrap (3)
- Lexically scoped subroutine wrappers
- Hook::LexWrap (3pm)
- Lexically scoped subroutine wrappers
- init.d (7)
- The SuSE boot concept
- rcxfs (8)
- The SuSE boot concept
- IO::HTML (3)
- Open an HTML file with automatic charset detection
- IO::HTML (3pm)
- Open an HTML file with automatic charset detection
- IO::Socket::SSL (3)
- SSL sockets with IO::Socket interface
- IO::Socket::SSL (3pm)
- SSL sockets with IO::Socket interface
- IO::Socket::SSL::Intercept (3)
- - SSL interception (man in the middle)
- IO::Socket::SSL::Intercept (3pm)
- - SSL interception (man in the middle)
- IP::Authority (3)
- fast lookup of authority by IP address
- IP::Authority (3pm)
- fast lookup of authority by IP address
- IP::Country::Medium (3)
- cached lookup of country codes by IP address and do...
- IP::Country::Medium (3pm)
- cached lookup of country codes by IP address and ...
- IP::Country::Slow (3)
- cached lookup of country codes by domain name and IP ...
- IP::Country::Slow (3pm)
- cached lookup of country codes by domain name and I...
- IPC::Run3 (3)
- run a subprocess with input/ouput redirection
- IPC::Run3 (3pm)
- run a subprocess with input/ouput redirection
- IPC::Run3::ProfReporter (3)
- base class for handling profiling data
- IPC::Run3::ProfReporter (3pm)
- base class for handling profiling data
- IPC::System::Simple (3)
- Run commands simply, with detailed diagnostics
- IPC::System::Simple (3pm)
- Run commands simply, with detailed diagnostics
- inkscape.zh_TW (1)
- SVG (Scalable Vector Graphics)
- isserial (8)
- determines if the underlying tty of stdin is a serial ...
- JSON::backportPP::Compat5005 (3)
- Helper module in using JSON::PP in Perl 5.005
- JSON::backportPP::Compat5005 (3pm)
- Helper module in using JSON::PP in Perl ...
- JSON::backportPP::Compat5006 (3)
- Helper module in using JSON::PP in Perl 5.6
- JSON::backportPP::Compat5006 (3pm)
- Helper module in using JSON::PP in Perl 5.6
- kvirc (1)
- an Internet Relay Chat client.
- killproc (8)
- Send signals to processes by full path name
- LIST_HEAD (3)
- implementations of lists, tail queues, and circular qu...
- LIST_HEAD (3bsd)
- implementations of singly-linked lists, singly-linked ...
- LIST_INSERT_HEAD (3)
- implementations of lists, tail queues, and circular qu...
- LIST_INSERT_HEAD (3bsd)
- implementations of singly-linked lists, singly-link...
- LOAD (7pg161)
- load a shared library file
- LWP (3)
- The World-Wide Web library for Perl
- LWP (3pm)
- The World-Wide Web library for Perl
- LWP::Authen::Ntlm (3)
- Library for enabling NTLM authentication (Microsoft) ...
- LWP::Authen::Ntlm (3pm)
- Library for enabling NTLM authentication (Microsoft...
- LWP::ConnCache (3)
- Connection cache manager
- LWP::ConnCache (3pm)
- Connection cache manager
- LWP::RobotUA (3)
- a class for well-behaved Web robots
- LWP::RobotUA (3pm)
- a class for well-behaved Web robots
- List::MoreUtils (3)
- Provide the stuff missing in List::Util
- List::MoreUtils (3pm)
- Provide the stuff missing in List::Util
- List::MoreUtils::Contributing (3)
- Gives rough introduction into contributin...
- List::MoreUtils::Contributing (3pm)
- Gives rough introduction into contribut...
- List::SomeUtils (3)
- Provide the stuff missing in List::Util
- List::SomeUtils (3pm)
- Provide the stuff missing in List::Util
- List::Util::XS (3)
- Indicate if List::Util was compiled with a C compiler
- List::Util::XS (3pm)
- Indicate if List::Util was compiled with a C compiler
- Locale::gettext (3)
- message handling functions
- Locale::gettext (3pm)
- message handling functions
- Log::Log4perl::JavaMap::SyslogAppender (3)
- wraps Log::Dispatch::Syslog
- logging (7)
- Why, What & How We Log
- makefloppies (1)
- Creates the default floppy device nodes.
- MD4 (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MD5 (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MIME::Body (3)
- the body of a MIME message
- MIME::Body (3pm)
- the body of a MIME message
- MIME::Charset (3)
- Charset Information for MIME
- MIME::Charset (3pm)
- Charset Information for MIME
- POD2::JA::MIME::Charset (3)
- MIME
- POD2::JA::MIME::Charset (3pm)
- MIME XXXXXXXXXXXXXX
- MIME::Decoder (3)
- an object for decoding the body part of a MIME stream
- MIME::Decoder (3pm)
- an object for decoding the body part of a MIME stream
- MIME::Decoder::BinHex (3)
- decode a "binhex" stream
- MIME::Decoder::BinHex (3pm)
- decode a "binhex" stream
- MIME::Head (3)
- MIME message header (a subclass of Mail::Header)
- MIME::Head (3pm)
- MIME message header (a subclass of Mail::Header)
- MIME::Parser::Filer (3)
- manage file-output of the parser
- MIME::Parser::Filer (3pm)
- manage file-output of the parser
- MIME::Parser::Results (3)
- results of the last entity parsed
- MIME::Parser::Results (3pm)
- results of the last entity parsed
- MIME::Words (3)
- deal with RFC 2047 encoded words
- MIME::Words (3pm)
- deal with RFC 2047 encoded words
- Mail::SpamAssassin::Plugin::MIMEHeader (3)
- perform regexp tests against MIM...
- Mail::SpamAssassin::Plugin::MIMEHeader (3pm)
- perform regexp tests against M...
- mrf (1)
- monochrome recursive format (compressed bitmaps)
- Mail::DKIM (3)
- Signs/verifies Internet mail with DKIM/DomainKey signa...
- Mail::DKIM (3pm)
- Signs/verifies Internet mail with DKIM/DomainKey signa...
- Mail::DKIM::ARC::MessageSignature (3)
- Subclass of Mail::DKIM::Signature whi...
- Mail::DKIM::ARC::Seal (3)
- represents a ARC-Seal header
- Mail::DKIM::ARC::Seal (3pm)
- represents a ARC-Seal header
- Mail::DKIM::Algorithm::Base (3)
- base class for DKIM "algorithms"
- Mail::DKIM::Algorithm::Base (3pm)
- base class for DKIM "algorithms"
- Mail::DKIM::AuthorDomainPolicy (3)
- represents an Author Domain Signing Prac...
- Mail::DKIM::AuthorDomainPolicy (3pm)
- represents an Author Domain Signing Pr...
- Mail::DKIM::Canonicalization::Base (3)
- base class for canonicalization methods
- Mail::DKIM::Canonicalization::DkimCommon (3pm)
- common canonicalization methods
- Mail::DKIM::DkSignature (3)
- represents a DomainKeys-Signature header
- Mail::DKIM::DkSignature (3pm)
- represents a DomainKeys-Signature header
- Mail::DKIM::Signature (3)
- represents a DKIM-Signature header
- Mail::DKIM::Signature (3pm)
- represents a DKIM-Signature header
- Mail::DKIM::TextWrap (3)
- text wrapping module written for use with DKIM
- Mail::DKIM::TextWrap (3pm)
- text wrapping module written for use with DKIM
- Mail::DMARC::HTTP (3)
- view stored reports via HTTP
- Mail::DMARC::HTTP (3pm)
- view stored reports via HTTP
- Mail::DMARC::Report::Aggregate::Recor... (3)
- auth_results section of a DMAR...
- Mail::DMARC::Report::Aggregate::Recor... (3pm)
- auth_results section of a DM...
- Mail::DMARC::Report::Aggregate::Recor... (3)
- auth_results/dkim section of a...
- Mail::DMARC::Report::Aggregate::Recor... (3pm)
- auth_results/dkim section of...
- Mail::DMARC::Report::Aggregate::Recor... (3)
- auth_results/spf section of a ...
- Mail::DMARC::Report::Aggregate::Recor... (3pm)
- auth_results/spf section of ...
- Mail::DMARC::Report::Send (3)
- report sending dispatch class
- Mail::DMARC::Report::Send (3pm)
- report sending dispatch class
- Mail::DMARC::Report::Send::HTTP (3)
- utility methods to send reports by HTTP
- Mail::DMARC::Report::Send::HTTP (3pm)
- utility methods to send reports by HTTP
- Mail::DMARC::Report::Send::SMTP (3)
- utility methods for sending reports via...
- Mail::DMARC::Report::Send::SMTP (3pm)
- utility methods for sending reports v...
- Mail::Field (3)
- base-class for manipulation of mail header fields
- Mail::Field (3pm)
- Base class for manipulation of mail header fields
- Mail::Field::Date (3)
- a date header field
- Mail::Field::Date (3pm)
- a date header field
- Mail::Filter (3)
- filter mail through multiple subroutines
- Mail::Filter (3pm)
- Filter mail through multiple subroutines
- Mail::Header (3)
- manipulate MIME headers
- Mail::Header (3pm)
- manipulate MIME headers
- Mail::IMAPClient::BodyStructure (3)
- parse fetched results
- Mail::IMAPClient::BodyStructure (3pm)
- parse fetched results
- Mail::IMAPClient::Thread (3)
- used internally by Mail::IMAPClient->thread
- Mail::IMAPClient::Thread (3pm)
- used internally by Mail::IMAPClient->thread
- Mail::Mailer (3pm)
- Simple interface to electronic mailing mechanisms
- Mail::Mbox::MessageParser::Cache (3)
- A cache-based mbox folder reader
- Mail::Mbox::MessageParser::Cache (3pm)
- A cache-based mbox folder reader
- Mail::Mbox::MessageParser::MetaInfo (3)
- A cache for folder metadata
- Mail::Mbox::MessageParser::MetaInfo (3pm)
- A cache for folder metadata
- Mail::SPF::Mech (3)
- SPF record mechanism base class
- Mail::SPF::Mech (3pm)
- SPF record mechanism base class
- Mail::SPF::Mech::A (3)
- SPF record "a" mechanism class
- Mail::SPF::Mech::A (3pm)
- SPF record "a" mechanism class
- Mail::SPF::Mech::All (3)
- SPF record "all" mechanism class
- Mail::SPF::Mech::All (3pm)
- SPF record "all" mechanism class
- Mail::SPF::Mech::Exists (3)
- SPF record "exists" mechanism class
- Mail::SPF::Mech::Exists (3pm)
- SPF record "exists" mechanism class
- Mail::SPF::Mech::IP4 (3)
- SPF record "ip4" mechanism class
- Mail::SPF::Mech::IP4 (3pm)
- SPF record "ip4" mechanism class
- Mail::SPF::Mech::IP6 (3)
- SPF record "ip6" mechanism class
- Mail::SPF::Mech::IP6 (3pm)
- SPF record "ip6" mechanism class
- Mail::SPF::Mech::Include (3)
- SPF record "include" mechanism class
- Mail::SPF::Mech::Include (3pm)
- SPF record "include" mechanism class
- Mail::SPF::Mech::MX (3)
- SPF record "mx" mechanism class
- Mail::SPF::Mech::MX (3pm)
- SPF record "mx" mechanism class
- Mail::SPF::Mech::PTR (3)
- SPF record "ptr" mechanism class
- Mail::SPF::Mech::PTR (3pm)
- SPF record "ptr" mechanism class
- Mail::SPF::SenderIPAddrMech (3)
- Abstract base class for SPF record mechanis...
- Mail::SPF::SenderIPAddrMech (3pm)
- Abstract base class for SPF record mechan...
- Mail::SpamAssassin::AICache (3)
- provide access to cached information for Ar...
- Mail::SpamAssassin::AICache (3pm)
- provide access to cached information for ...
- Mail::SpamAssassin::ArchiveIterator (3)
- find and process messages one at a ...
- Mail::SpamAssassin::ArchiveIterator (3pm)
- find and process messages one at ...
- Mail::SpamAssassin::AsyncLoop (3)
- scanner asynchronous event loop
- Mail::SpamAssassin::AsyncLoop (3pm)
- scanner asynchronous event loop
- Mail::SpamAssassin::Message (3)
- decode, render, and hold an RFC-2822 message
- Mail::SpamAssassin::Message (3pm)
- decode, render, and hold an RFC-2822 message
- Mail::SpamAssassin::Plugin::ASN (3)
- SpamAssassin plugin to look up the Auto...
- Mail::SpamAssassin::Plugin::ASN (3pm)
- SpamAssassin plugin to look up the Au...
- Mail::SpamAssassin::Plugin::AWL (3pm)
- Normalize scores via auto-whitelist
- Mail::SpamAssassin::Plugin::AccessDB (3)
- check message against Access Database
- Mail::SpamAssassin::Plugin::AccessDB (3pm)
- check message against Access Dat...
- Mail::SpamAssassin::Plugin::AutoLearn... (3)
- threshold-based discriminator ...
- Mail::SpamAssassin::Plugin::AutoLearn... (3pm)
- threshold-based discriminato...
- Mail::SpamAssassin::Plugin::Bayes (3)
- determine spammishness using a Bayesi...
- Mail::SpamAssassin::Plugin::Bayes (3pm)
- determine spammishness using a Baye...
- Mail::SpamAssassin::Plugin::Check (3)
- primary message check functionality
- Mail::SpamAssassin::Plugin::Check (3pm)
- primary message check functionality
- Mail::SpamAssassin::Plugin::DCC (3)
- perform DCC check of messages
- Mail::SpamAssassin::Plugin::DCC (3pm)
- perform DCC check of messages
- Mail::SpamAssassin::Plugin::PhishTag (3)
- SpamAssassin plugin for redirectin...
- Mail::SpamAssassin::Plugin::PhishTag (3pm)
- SpamAssassin plugin for redirect...
- Mail::SpamAssassin::Plugin::Phishing (3)
- check uris against phishing feed
- Mail::SpamAssassin::Plugin::Phishing (3pm)
- check uris against phishing feed
- Mail::SpamAssassin::Plugin::Pyzor (3)
- perform Pyzor check of messages
- Mail::SpamAssassin::Plugin::Pyzor (3pm)
- perform Pyzor check of messages
- Mail::SpamAssassin::Plugin::Razor2 (3)
- perform Razor check of messages
- Mail::SpamAssassin::Plugin::Razor2 (3pm)
- perform Razor check of messages
- Mail::SpamAssassin::Plugin::ResourceL... (3)
- Limit the memory and/or CPU of...
- Mail::SpamAssassin::Plugin::ResourceL... (3pm)
- Limit the memory and/or CPU ...
- Mail::SpamAssassin::Plugin::Reuse (3)
- For reusing old rule hits during a ma...
- Mail::SpamAssassin::Plugin::Reuse (3pm)
- For reusing old rule hits during a ...
- Mail::SpamAssassin::Plugin::Shortcircuit (3)
- short-circuit evaluation for c...
- Mail::SpamAssassin::Plugin::Shortcircuit (3pm)
- short-circuit evaluation for...
- Mail::SpamAssassin::Plugin::TxRep (3)
- Normalize scores with sender reputati...
- Mail::SpamAssassin::Plugin::TxRep (3pm)
- Normalize scores with sender reputa...
- Mail::SpamAssassin::PluginHandler (3)
- SpamAssassin plugin handler
- Mail::SpamAssassin::PluginHandler (3pm)
- SpamAssassin plugin handler
- Mail::SpamAssassin::SQLBasedAddrList (3pm)
- SpamAssassin SQL Based Auto Whit...
- Mail::SpamAssassin::SubProcBackChannel (3)
- back-channel for communication b...
- Mail::SpamAssassin::SubProcBackChannel (3pm)
- back-channel for communication...
- Mail::SpamAssassin::Util::DependencyInfo (3)
- spamassassin debugging helpers
- Mail::SpamAssassin::Util::DependencyInfo (3pm)
- spamassassin debugging helpers
- Math::BigFloat (3)
- arbitrary size floating point math package
- Math::Int64 (3)
- Manipulate 64 bits integers in Perl
- Math::Int64 (3pm)
- Manipulate 64 bits integers in Perl
- Math::Int64::die_on_overflow (3)
- catch overflows when using Math::Int64
- Math::Int64::die_on_overflow (3pm)
- catch overflows when using Math::Int64
- Math::Int64::native_if_available (3)
- Use the native Perl 64-bit integer imp...
- Math::Int64::native_if_available (3pm)
- Use the native Perl 64-bit integer i...
- Math::UInt64 (3)
- Manipulate 64 bit unsigned integers from Perl
- Math::UInt64 (3pm)
- Manipulate 64 bit unsigned integers from Perl
- MaxMind::DB::Common (3)
- Code shared by the MaxMind DB reader and writer mod...
- MaxMind::DB::Common (3pm)
- Code shared by the MaxMind DB reader and writer m...
- Method::Generate::Constructor::Role::... (3)
- a role to make Moo constructor...
- Method::Generate::Constructor::Role::... (3pm)
- a role to make Moo construct...
- ModPerl::MethodLookup (3)
- - Lookup mod_perl modules, objects and methods
- ModPerl::MethodLookup (3pm)
- - Lookup mod_perl modules, objects and methods
- ModPerl::Util (3)
- Helper mod_perl Functions
- ModPerl::Util (3pm)
- Helper mod_perl Functions
- Module::Build::API (3)
- API Reference for Module Authors
- Module::Build::API (3pm)
- API Reference for Module Authors
- Module::Build::Authoring (3)
- Authoring Module::Build modules
- Module::Build::Authoring (3pm)
- Authoring Module::Build modules
- Module::Build::Base (3)
- Default methods for Module::Build
- Module::Build::Base (3pm)
- Default methods for Module::Build
- Module::Build::Bundling (3)
- How to bundle Module::Build with a distribution
- Module::Build::Bundling (3pm)
- How to bundle Module::Build with a distribution
- Module::Build::Compat (3)
- Compatibility with ExtUtils::MakeMaker
- Module::Build::Compat (3pm)
- Compatibility with ExtUtils::MakeMaker
- Module::Metadata (3)
- Gather package and POD information from perl module files
- Module::Metadata (3pm)
- Gather package and POD information from perl module ...
- Module::Pluggable (3)
- automatically give your module the ability to have pl...
- Module::Pluggable (3pm)
- automatically give your module the ability to have ...
- Module::Pluggable::Object (3)
- automatically give your module the ability to...
- Module::Pluggable::Object (3pm)
- automatically give your module the ability ...
- Module::Runtime (3)
- runtime module handling
- Module::Runtime (3pm)
- runtime module handling
- Moo (3)
- Minimalist Object Orientation (with Moose compatibility)
- Moo (3pm)
- Minimalist Object Orientation (with Moose compatibility)
- MooX::Types::MooseLike (3)
- some Moosish types and a type builder
- MooX::Types::MooseLike (3pm)
- some Moosish types and a type builder
- Mozilla::PublicSuffix (3)
- Get a domain name's public suffix via the Mozilla...
- Mozilla::PublicSuffix (3pm)
- Get a domain name's public suffix via the Mozil...
- NEXT (3)
- Provide a pseudo-class NEXT (et al) that allows method...
- XML::XPath::Node::Namespace (3)
- an XML namespace node
- XML::XPath::Node::Namespace (3pm)
- an XML namespace node
- neofetch (1)
- A fast, highly customizable system info script
- Net::DNS (3)
- Perl Interface to the Domain Name System
- Net::DNS (3pm)
- Perl interface to the Domain Name System
- Net::DNS::Header (3)
- DNS packet header
- Net::DNS::Header (3pm)
- DNS packet header
- Net::DNS::RR::DHCID (3)
- DNS DHCID resource record
- Net::DNS::RR::DHCID (3pm)
- DNS DHCID resource record
- Net::DNS::RR::HINFO (3)
- DNS HINFO resource record
- Net::DNS::RR::HINFO (3pm)
- DNS HINFO resource record
- Net::DNS::RR::HIP (3)
- DNS HIP resource record
- Net::DNS::RR::HIP (3pm)
- DNS HIP resource record
- Net::DNS::RR::HTTPS (3)
- DNS HTTPS resource record
- Net::DNS::RR::HTTPS (3pm)
- DNS HTTPS resource record
- Net::DNS::RR::SSHFP (3)
- DNS SSHFP resource record
- Net::DNS::RR::SSHFP (3pm)
- DNS SSHFP resource record
- Net::Domain (3)
- Attempt to evaluate the current host's internet name a...
- Net::Domain (3pm)
- Attempt to evaluate the current host's internet name a...
- Net::HTTP (3)
- Low-level HTTP connection (client)
- Net::HTTP (3pm)
- Low-level HTTP connection (client)
- Net::HTTP::Methods (3)
- Methods shared by Net::HTTP and Net::HTTPS
- Net::HTTP::Methods (3pm)
- Methods shared by Net::HTTP and Net::HTTPS
- Net::HTTP::NB (3)
- Non-blocking HTTP client
- Net::HTTP::NB (3pm)
- Non-blocking HTTP client
- Net::HTTPS (3)
- Low-level HTTP over SSL/TLS connection (client)
- Net::HTTPS (3pm)
- Low-level HTTP over SSL/TLS connection (client)
- Net::IDN::UTS46::_Mapping (3)
- Tables from Unicode Technical Standard #46 (U...
- Net::IDN::UTS46::_Mapping (3pm)
- Tables from Unicode Technical Standard #46 ...
- Net::IMAP::Simple (3)
- Perl extension for simple IMAP account handling.
- Net::IMAP::Simple (3pm)
- Perl extension for simple IMAP account handling.
- Net::IMAP::Simple::PipeSocket (3)
- a little wrapper around IPC-Open3 that fe...
- Net::IMAP::Simple::PipeSocket (3pm)
- a little wrapper around IPC-Open3 that ...
- Net::SSLeay::Handle (3)
- Perl module that lets SSL (HTTPS) sockets be handle...
- Net::SSLeay::Handle (3pm)
- Perl module that lets SSL (HTTPS) sockets be hand...
- Net::Server::HTTP (3)
- very basic Net::Server based HTTP server class
- Net::Server::HTTP (3pm)
- very basic Net::Server based HTTP server class
- Net::Server::Multiplex (3)
- Multiplex several connections within one process
- Net::Server::Multiplex (3pm)
- Multiplex several connections within one process
- Net::Server::PSGI (3)
- basic Net::Server based PSGI HTTP server class
- Net::Server::PSGI (3pm)
- basic Net::Server based PSGI HTTP server class
- Net::Server::Proto::SSLEAY (3)
- Custom Net::Server SSL protocol handler base...
- Net::Server::Proto::SSLEAY (3pm)
- Custom Net::Server SSL protocol handler ba...
- Net::Server::SIG (3)
- adpf - Safer signal handling
- Net::Server::SIG (3pm)
- adpf - Safer signal handling
- OPENSSL_VERSION_MAJOR (3osslssl-3)
- get OpenSSL version number and other inf...
- OPENSSL_VERSION_MINOR (3osslssl-3)
- get OpenSSL version number and other inf...
- OPENSSL_VERSION_PATCH (3osslssl-3)
- get OpenSSL version number and other inf...
- OPENSSL_VERSION_PRE_RELEASE (3osslssl-3)
- get OpenSSL version number and oth...
- OPENSSL_version_major (3osslssl-3)
- get OpenSSL version number and other inf...
- OPENSSL_version_minor (3osslssl-3)
- get OpenSSL version number and other inf...
- OPENSSL_version_patch (3osslssl-3)
- get OpenSSL version number and other inf...
- OPENSSL_version_pre_release (3osslssl-3)
- get OpenSSL version number and oth...
- opie (4)
- One-time Passwords In Everything
- optipng (1)
- Optimize Portable Network Graphics files
- PAM (8)
- Pluggable Authentication Modules for Linux
- pcmanfm (1)
- A lightweight Gtk+ based file manager for X Window.
- pfm (5)
- PFM graphic image file format
- XML::XPath::Node::PI (3)
- an XML processing instruction node
- XML::XPath::Node::PI (3pm)
- an XML processing instruction node
- PPI (3)
- Parse, Analyze and Manipulate Perl (without perl)
- PPI (3pm)
- Parse, Analyze and Manipulate Perl (without perl)
- PPI::Cache (3)
- The PPI Document Caching Layer
- PPI::Cache (3pm)
- The PPI Document Caching Layer
- PPI::Element (3)
- The abstract Element class, a base for all source objects
- PPI::Element (3pm)
- The abstract Element class, a base for all source objects
- PPI::Exception (3)
- The PPI exception base class
- PPI::Exception (3pm)
- The PPI exception base class
- PPI::Find (3)
- Object version of the Element->find method
- PPI::Find (3pm)
- Object version of the Element->find method
- PPI::Lexer (3)
- The PPI Lexer
- PPI::Lexer (3pm)
- The PPI Lexer
- PPI::Node (3)
- Abstract PPI Node class, an Element that can contain o...
- PPI::Node (3pm)
- Abstract PPI Node class, an Element that can contain o...
- PPI::Statement (3)
- The base class for Perl statements
- PPI::Statement (3pm)
- The base class for Perl statements
- PPI::Statement::Break (3)
- Statements which break out of normal statement flow
- PPI::Statement::Break (3pm)
- Statements which break out of normal statement ...
- PPI::Statement::Data (3)
- The __DATA__ section of a file
- PPI::Statement::Data (3pm)
- The __DATA__ section of a file
- PPI::Statement::End (3)
- Content after the __END__ of a module
- PPI::Statement::End (3pm)
- Content after the __END__ of a module
- PPI::Statement::Given (3)
- A given-when statement
- PPI::Statement::Given (3pm)
- A given-when statement
- PPI::Statement::Include (3)
- Statements that include other code
- PPI::Statement::Include (3pm)
- Statements that include other code
- PPI::Statement::Scheduled (3)
- A scheduled code block
- PPI::Statement::Scheduled (3pm)
- A scheduled code block
- PPI::Statement::UnmatchedBrace (3)
- Isolated unmatched brace
- PPI::Statement::UnmatchedBrace (3pm)
- Isolated unmatched brace
- PPI::Statement::When (3)
- A when statement
- PPI::Statement::When (3pm)
- A when statement
- PPI::Structure (3)
- The base class for Perl braced structures
- PPI::Structure (3pm)
- The base class for Perl braced structures
- PPI::Structure::Constructor (3)
- Anonymous hash or array constructor
- PPI::Structure::Constructor (3pm)
- Anonymous hash or array constructor
- PPI::Structure::Given (3)
- Circular braces for a switch statement
- PPI::Structure::Given (3pm)
- Circular braces for a switch statement
- PPI::Structure::Subscript (3)
- Braces that represent an array or hash subscript
- PPI::Structure::Subscript (3pm)
- Braces that represent an array or hash subs...
- PPI::Structure::When (3)
- Circular braces for a when statement
- PPI::Structure::When (3pm)
- Circular braces for a when statement
- PPI::Token::ArrayIndex (3)
- Token getting the last index for an array
- PPI::Token::ArrayIndex (3pm)
- Token getting the last index for an array
- PPI::Token::Cast (3)
- A prefix which forces a value into a different context
- PPI::Token::Cast (3pm)
- A prefix which forces a value into a different context
- PPI::Token::DashedWord (3)
- A dashed bareword token
- PPI::Token::DashedWord (3pm)
- A dashed bareword token
- PPI::Token::Data (3)
- The actual data in the __DATA__ section of a file
- PPI::Token::Data (3pm)
- The actual data in the __DATA__ section of a file
- PPI::Token::End (3)
- Completely useless content after the __END__ tag
- PPI::Token::End (3pm)
- Completely useless content after the __END__ tag
- PPI::Token::HereDoc (3)
- Token class for the here-doc
- PPI::Token::HereDoc (3pm)
- Token class for the here-doc
- PPI::Token::Number::Hex (3)
- Token class for a binary number
- PPI::Token::Number::Hex (3pm)
- Token class for a binary number
- PPI::Token::Quote::Interpolate (3)
- The interpolation quote-like operator
- PPI::Token::Quote::Interpolate (3pm)
- The interpolation quote-like operator
- PPI::Token::Quote::Literal (3)
- The literal quote-like operator
- PPI::Token::Quote::Literal (3pm)
- The literal quote-like operator
- PPI::Token::QuoteLike::Command (3)
- The command quote-like operator
- PPI::Token::QuoteLike::Command (3pm)
- The command quote-like operator
- PPI::Token::QuoteLike::Readline (3)
- The readline quote-like operator
- PPI::Token::QuoteLike::Readline (3pm)
- The readline quote-like operator
- PPI::Token::Regexp::Match (3)
- A standard pattern match regex
- PPI::Token::Regexp::Match (3pm)
- A standard pattern match regex
- PPI::Token::Regexp::Substitute (3)
- A match and replace regular expression t...
- PPI::Token::Regexp::Substitute (3pm)
- A match and replace regular expression...
- PPI::Token::Separator (3)
- The __DATA__ and __END__ tags
- PPI::Token::Separator (3pm)
- The __DATA__ and __END__ tags
- PPI::Token::Structure (3)
- Token class for characters that define code struc...
- PPI::Token::Structure (3pm)
- Token class for characters that define code str...
- PPI::Token::Symbol (3)
- A token class for variables and other symbols
- PPI::Token::Symbol (3pm)
- A token class for variables and other symbols
- PPI::Token::Whitespace (3)
- Tokens representing ordinary white space
- PPI::Token::Whitespace (3pm)
- Tokens representing ordinary white space
- PPI::Token::Word (3)
- The generic "word" Token
- PPI::Token::Word (3pm)
- The generic "word" Token
- PPI::Token::_QuoteEngine (3)
- The PPI Quote Engine
- PPI::Token::_QuoteEngine (3pm)
- The PPI Quote Engine
- PPI::Tokenizer (3)
- The Perl Document Tokenizer
- PPI::Tokenizer (3pm)
- The Perl Document Tokenizer
- PPI::Transform::UpdateCopyright (3)
- Demonstration PPI::Transform class
- PPI::Transform::UpdateCopyright (3pm)
- Demonstration PPI::Transform class
- PPIx::QuoteLike (3)
- Parse Perl string literals and string-literal-like thi...
- PPIx::QuoteLike (3pm)
- Parse Perl string literals and string-literal-like th...
- PPIx::QuoteLike::Dumper (3)
- Dump the results of parsing quotelike things
- PPIx::QuoteLike::Dumper (3pm)
- Dump the results of parsing quotelike things
- PPIx::QuoteLike::Token::Structure (3)
- Represent the structure of the string.
- PPIx::QuoteLike::Token::Structure (3pm)
- Represent the structure of the string.
- PPIx::QuoteLike::Token::Whitespace (3)
- Represent insignificant white space.
- PPIx::QuoteLike::Token::Whitespace (3pm)
- Represent insignificant white space.
- PPIx::Regexp::Constant (3)
- Constants for the PPIx::Regexp system
- PPIx::Regexp::Constant (3pm)
- Constants for the PPIx::Regexp system
- PPIx::Regexp::Dumper (3)
- Dump the results of parsing regular expressions
- PPIx::Regexp::Dumper (3pm)
- Dump the results of parsing regular expressions
- PPIx::Regexp::Element (3)
- Base of the PPIx::Regexp hierarchy.
- PPIx::Regexp::Element (3pm)
- Base of the PPIx::Regexp hierarchy.
- PPIx::Regexp::Node::Range (3)
- Represent a character range in a character class
- PPIx::Regexp::Node::Range (3pm)
- Represent a character range in a character ...
- PPIx::Regexp::Structure::Assertion (3)
- Represent a parenthesized assertion
- PPIx::Regexp::Structure::Assertion (3pm)
- Represent a parenthesized assertion
- PPIx::Regexp::Structure::BranchReset (3)
- Represent a branch reset group
- PPIx::Regexp::Structure::BranchReset (3pm)
- Represent a branch reset group
- PPIx::Regexp::Structure::Capture (3)
- Represent capture parentheses.
- PPIx::Regexp::Structure::Capture (3pm)
- Represent capture parentheses.
- PPIx::Regexp::Structure::CharClass (3)
- Represent a character class
- PPIx::Regexp::Structure::CharClass (3pm)
- Represent a character class
- PPIx::Regexp::Structure::Code (3)
- Represent one of the code structures.
- PPIx::Regexp::Structure::Code (3pm)
- Represent one of the code structures.
- PPIx::Regexp::Structure::Modifier (3)
- Represent modifying parentheses
- PPIx::Regexp::Structure::Modifier (3pm)
- Represent modifying parentheses
- PPIx::Regexp::Structure::RegexSet (3)
- Represent a regexp character set
- PPIx::Regexp::Structure::RegexSet (3pm)
- Represent a regexp character set
- PPIx::Regexp::Structure::Regexp (3)
- Represent the top-level regular expression
- PPIx::Regexp::Structure::Regexp (3pm)
- Represent the top-level regular expre...
- PPIx::Regexp::Structure::Replacement (3)
- Represent the replacement in s///
- PPIx::Regexp::Structure::Replacement (3pm)
- Represent the replacement in s///
- PPIx::Regexp::Structure::Switch (3)
- Represent a switch
- PPIx::Regexp::Structure::Switch (3pm)
- Represent a switch
- PPIx::Regexp::Support (3)
- Basis for the PPIx::Regexp support classes
- PPIx::Regexp::Support (3pm)
- Basis for the PPIx::Regexp support classes
- PPIx::Regexp::Token::CharClass (3)
- Represent a character class
- PPIx::Regexp::Token::CharClass (3pm)
- Represent a character class
- PPIx::Regexp::Token::CharClass::POSIX (3)
- Represent a POSIX character class
- PPIx::Regexp::Token::CharClass::POSIX (3pm)
- Represent a POSIX character class
- PPIx::Regexp::Token::CharClass::POSIX... (3)
- Represent an unknown or unsupp...
- PPIx::Regexp::Token::CharClass::POSIX... (3pm)
- Represent an unknown or unsu...
- PPIx::Regexp::Token::CharClass::Simple (3)
- This class represents a simple c...
- PPIx::Regexp::Token::CharClass::Simple (3pm)
- This class represents a simple...
- PPIx::Regexp::Token::Code (3)
- Represent a chunk of Perl embedded in a regul...
- PPIx::Regexp::Token::Code (3pm)
- Represent a chunk of Perl embedded in a reg...
- PPIx::Regexp::Token::Condition (3)
- Represent the condition of a switch
- PPIx::Regexp::Token::Condition (3pm)
- Represent the condition of a switch
- PPIx::Regexp::Token::Delimiter (3)
- Represent the delimiters of the regular ...
- PPIx::Regexp::Token::Delimiter (3pm)
- Represent the delimiters of the regula...
- PPIx::Regexp::Token::GroupType (3)
- Represent a grouping parenthesis type.
- PPIx::Regexp::Token::GroupType (3pm)
- Represent a grouping parenthesis type.
- PPIx::Regexp::Token::GroupType::Asser... (3)
- Represent a look ahead or look...
- PPIx::Regexp::Token::GroupType::Asser... (3pm)
- Represent a look ahead or lo...
- PPIx::Regexp::Token::GroupType::Branc... (3)
- Represent a branch reset speci...
- PPIx::Regexp::Token::GroupType::Branc... (3pm)
- Represent a branch reset spe...
- PPIx::Regexp::Token::GroupType::Code (3)
- Represent one of the embedded code...
- PPIx::Regexp::Token::GroupType::Code (3pm)
- Represent one of the embedded co...
- PPIx::Regexp::Token::GroupType::Modifier (3)
- Represent the modifiers in a m...
- PPIx::Regexp::Token::GroupType::Modifier (3pm)
- Represent the modifiers in a...
- PPIx::Regexp::Token::GroupType::Switch (3)
- Represent the introducing charac...
- PPIx::Regexp::Token::GroupType::Switch (3pm)
- Represent the introducing char...
- PPIx::Regexp::Token::Interpolation (3)
- Represent an interpolation in the PP...
- PPIx::Regexp::Token::Interpolation (3pm)
- Represent an interpolation in the ...
- PPIx::Regexp::Token::Literal (3)
- Represent a literal character
- PPIx::Regexp::Token::Literal (3pm)
- Represent a literal character
- PPIx::Regexp::Token::NoOp (3)
- Represent a token that does nothing.
- PPIx::Regexp::Token::NoOp (3pm)
- Represent a token that does nothing.
- PPIx::Regexp::Token::Unmatched (3)
- Represent an unmatched right bracket
- PPIx::Regexp::Token::Unmatched (3pm)
- Represent an unmatched right bracket
- PPIx::Regexp::Token::Whitespace (3)
- Represent whitespace
- PPIx::Regexp::Token::Whitespace (3pm)
- Represent whitespace
- PPIx::Utils::Language (3)
- Utility functions for PPI related to the Perl lan...
- PPIx::Utils::Language (3pm)
- Utility functions for PPI related to the Perl l...
- Package::Stash (3)
- Routines for manipulating stashes
- Package::Stash (3pm)
- routines for manipulating stashes
- Package::Stash::PP (3)
- Pure perl implementation of the Package::Stash API
- Package::Stash::PP (3pm)
- pure perl implementation of the Package::Stash API
- Package::Stash::XS (3)
- Faster and more correct implementation of the Packag...
- Package::Stash::XS (3pm)
- faster and more correct implementation of the Pack...
- PadWalker (3)
- play with other peoples' lexical variables
- PadWalker (3pm)
- play with other peoples' lexical variables
- Params::Util (3)
- Simple, compact and correct param-checking functions
- Params::Util (3pm)
- Simple, compact and correct param-checking functions
- Params::ValidationCompiler::Compiler (3)
- Object that implements the check s...
- Params::ValidationCompiler::Compiler (3pm)
- Object that implements the check...
- Params::ValidationCompiler::Exceptions (3)
- Defines exceptions thrown by Par...
- Params::ValidationCompiler::Exceptions (3pm)
- Defines exceptions thrown by P...
- parcellite (1)
- Lightweight GTK+ Clipboard Manager
- Path::Class (3)
- Cross-platform path specification manipulation
- Path::Class (3pm)
- Cross-platform path specification manipulation
- Path::Class::Dir (3)
- Objects representing directories
- Path::Class::Dir (3pm)
- Objects representing directories
- Path::Class::Entity (3)
- Base class for files and directories
- Path::Class::Entity (3pm)
- Base class for files and directories
- Path::Class::File (3)
- Objects representing files
- Path::Class::File (3pm)
- Objects representing files
- Path::Tiny (3)
- File path utility
- Path::Tiny (3pm)
- File path utility
- Perl::Critic::CORE_DEVELOPER (3)
- Hints for working on the Perl::Critic core.
- Perl::Critic::CORE_DEVELOPER (3pm)
- Hints for working on the Perl::Critic core.
- Perl::Critic::Config (3)
- The final derived Perl::Critic configuration, comb...
- Perl::Critic::Config (3pm)
- The final derived Perl::Critic configuration, co...
- Perl::Critic::DEVELOPER (3)
- How to make new Perl::Critic::Policy modules.
- Perl::Critic::DEVELOPER (3pm)
- How to make new Perl::Critic::Policy modules.
- Perl::Critic::Document (3)
- Caching wrapper around a PPI::Document.
- Perl::Critic::Document (3pm)
- Caching wrapper around a PPI::Document.
- Perl::Critic::Exception::Configuration (3)
- A problem with Perl::Critic conf...
- Perl::Critic::Exception::Configuration (3pm)
- A problem with Perl::Critic co...
- Perl::Critic::Exception::Configuratio... (3)
- A problem with Perl::Critic co...
- Perl::Critic::Exception::Configuratio... (3pm)
- A problem with Perl::Critic ...
- Perl::Critic::Exception::Configuratio... (3)
- The configuration referred to ...
- Perl::Critic::Exception::Configuratio... (3pm)
- The configuration referred t...
- Perl::Critic::Exception::Configuratio... (3)
- A problem with an option in th...
- Perl::Critic::Exception::Configuratio... (3pm)
- A problem with an option in ...
- Perl::Critic::Exception::Configuratio... (3)
- A problem with Perl::Critic gl...
- Perl::Critic::Exception::Configuratio... (3pm)
- A problem with Perl::Critic ...
- Perl::Critic::Exception::Configuratio... (3)
- The configuration referred to ...
- Perl::Critic::Exception::Configuratio... (3pm)
- The configuration referred t...
- Perl::Critic::Exception::Configuratio... (3)
- A problem with the value of a ...
- Perl::Critic::Exception::Configuratio... (3pm)
- A problem with the value of ...
- Perl::Critic::Exception::Configuratio... (3)
- A problem with configuration o...
- Perl::Critic::Exception::Configuratio... (3pm)
- A problem with configuration...
- Perl::Critic::Exception::Configuratio... (3)
- The configuration referred to ...
- Perl::Critic::Exception::Configuratio... (3pm)
- The configuration referred t...
- Perl::Critic::Exception::Configuratio... (3)
- A problem with the value of a ...
- Perl::Critic::Exception::Configuratio... (3pm)
- A problem with the value of ...
- Perl::Critic::Exception::Fatal (3)
- A problem that should cause Perl::Critic...
- Perl::Critic::Exception::Fatal (3pm)
- A problem that should cause Perl::Crit...
- Perl::Critic::Exception::Fatal::Generic (3)
- A problem for which there is no...
- Perl::Critic::Exception::Fatal::Generic (3pm)
- A problem for which there is ...
- Perl::Critic::Exception::Fatal::Internal (3)
- A problem with the Perl::Criti...
- Perl::Critic::Exception::Fatal::Internal (3pm)
- A problem with the Perl::Cri...
- Perl::Critic::Exception::IO (3)
- A problem with input or output.
- Perl::Critic::Exception::IO (3pm)
- A problem with input or output.
- Perl::Critic::Exception::Parse (3)
- The code doesn't look like code.
- Perl::Critic::Exception::Parse (3pm)
- The code doesn't look like code.
- Perl::Critic::OptionsProcessor (3)
- The global configuration default values,...
- Perl::Critic::OptionsProcessor (3pm)
- The global configuration default value...
- Perl::Critic::Policy::BuiltinFunction... (3)
- Map blocks should have a singl...
- Perl::Critic::Policy::BuiltinFunction... (3pm)
- Map blocks should have a sin...
- Perl::Critic::Policy::BuiltinFunction... (3)
- Prohibit "\shift" in code
- Perl::Critic::Policy::BuiltinFunction... (3pm)
- Prohibit "\shift" in code
- Perl::Critic::Policy::BuiltinFunction... (3)
- Use Time::HiRes instead of som...
- Perl::Critic::Policy::BuiltinFunction... (3pm)
- Use Time::HiRes instead of s...
- Perl::Critic::Policy::BuiltinFunction... (3)
- Sort blocks should have a sing...
- Perl::Critic::Policy::BuiltinFunction... (3pm)
- Sort blocks should have a si...
- Perl::Critic::Policy::ClassHierarchie... (3)
- AUTOLOAD methods should be avo...
- Perl::Critic::Policy::ClassHierarchie... (3pm)
- AUTOLOAD methods should be a...
- Perl::Critic::Policy::ClassHierarchie... (3)
- Employ "use parent" instead of...
- Perl::Critic::Policy::ClassHierarchie... (3pm)
- Employ "use parent" instead ...
- Perl::Critic::Policy::ClassHierarchie... (3)
- Write "bless {}, $class;" inst...
- Perl::Critic::Policy::ClassHierarchie... (3pm)
- Write "bless {}, $class;" in...
- Perl::Critic::Policy::CodeLayout::Pro... (3)
- Write "open $handle, $path" in...
- Perl::Critic::Policy::CodeLayout::Pro... (3pm)
- Write "open $handle, $path" ...
- Perl::Critic::Policy::CodeLayout::Pro... (3)
- Don't use whitespace at the en...
- Perl::Critic::Policy::CodeLayout::Pro... (3pm)
- Don't use whitespace at the ...
- Perl::Critic::Policy::CodeLayout::Req... (3)
- Use the same newline through t...
- Perl::Critic::Policy::CodeLayout::Req... (3pm)
- Use the same newline through...
- Perl::Critic::Policy::CodeLayout::Req... (3)
- Must run code through perltidy.
- Perl::Critic::Policy::CodeLayout::Req... (3pm)
- Must run code through perltidy.
- Perl::Critic::Policy::CodeLayout::Req... (3)
- Put a comma at the end of ever...
- Perl::Critic::Policy::CodeLayout::Req... (3pm)
- Put a comma at the end of ev...
- Perl::Critic::Policy::ControlStructur... (3)
- Don't use labels that are the ...
- Perl::Critic::Policy::ControlStructur... (3pm)
- Don't use labels that are th...
- Perl::Critic::Policy::ControlStructur... (3)
- Write "while(! $condition)" in...
- Perl::Critic::Policy::ControlStructur... (3pm)
- Write "while(! $condition)" ...
- Perl::Critic::Policy::Documentation::... (3)
- Check your spelling.
- Perl::Critic::Policy::Documentation::... (3pm)
- Check your spelling.
- Perl::Critic::Policy::Documentation::... (3)
- The "=head1 NAME" section shou...
- Perl::Critic::Policy::Documentation::... (3pm)
- The "=head1 NAME" section sh...
- Perl::Critic::Policy::Documentation::... (3)
- All POD should be after "__END...
- Perl::Critic::Policy::Documentation::... (3pm)
- All POD should be after "__E...
- Perl::Critic::Policy::Documentation::... (3)
- Organize your POD into the cus...
- Perl::Critic::Policy::Documentation::... (3pm)
- Organize your POD into the c...
- Perl::Critic::Policy::ErrorHandling::... (3)
- Use functions from Carp instea...
- Perl::Critic::Policy::ErrorHandling::... (3pm)
- Use functions from Carp inst...
- Perl::Critic::Policy::ErrorHandling::... (3)
- You can't depend upon the valu...
- Perl::Critic::Policy::ErrorHandling::... (3pm)
- You can't depend upon the va...
- Perl::Critic::Policy::InputOutput::Pr... (3)
- Write "opendir my $dh, $dirnam...
- Perl::Critic::Policy::InputOutput::Pr... (3pm)
- Write "opendir my $dh, $dirn...
- Perl::Critic::Policy::InputOutput::Pr... (3)
- Write "open my $fh, q{<}, $fil...
- Perl::Critic::Policy::InputOutput::Pr... (3pm)
- Write "open my $fh, q{<}, $f...
- Perl::Critic::Policy::InputOutput::Pr... (3)
- Use "local $/ = undef" or Path...
- Perl::Critic::Policy::InputOutput::Pr... (3)
- Never write "select($fh)".
- Perl::Critic::Policy::InputOutput::Pr... (3pm)
- Never write "select($fh)".
- Perl::Critic::Policy::InputOutput::Pr... (3)
- Write "while( $line = <> ){......
- Perl::Critic::Policy::InputOutput::Pr... (3pm)
- Write "while( $line = <> ){....
- Perl::Critic::Policy::InputOutput::Pr... (3)
- Write "open $fh, q{<}, $filena...
- Perl::Critic::Policy::InputOutput::Pr... (3pm)
- Write "open $fh, q{<}, $file...
- Perl::Critic::Policy::InputOutput::Re... (3)
- Write "print {$FH} $foo, $bar;...
- Perl::Critic::Policy::InputOutput::Re... (3pm)
- Write "print {$FH} $foo, $ba...
- Perl::Critic::Policy::InputOutput::Re... (3)
- Close filehandles as soon as p...
- Perl::Critic::Policy::InputOutput::Re... (3pm)
- Close filehandles as soon as...
- Perl::Critic::Policy::InputOutput::Re... (3)
- Write "my $error = close $fh;"...
- Perl::Critic::Policy::InputOutput::Re... (3pm)
- Write "my $error = close $fh...
- Perl::Critic::Policy::InputOutput::Re... (3)
- Write "my $error = open $fh, $...
- Perl::Critic::Policy::InputOutput::Re... (3pm)
- Write "my $error = open $fh,...
- Perl::Critic::Policy::InputOutput::Re... (3)
- Write "open $fh, q{<:encoding(...
- Perl::Critic::Policy::InputOutput::Re... (3pm)
- Write "open $fh, q{<:encodin...
- Perl::Critic::Policy::Modules::Prohib... (3)
- Export symbols via "@EXPORT_OK...
- Perl::Critic::Policy::Modules::Prohib... (3pm)
- Export symbols via "@EXPORT_...
- Perl::Critic::Policy::Modules::Prohib... (3)
- Avoid putting conditional logi...
- Perl::Critic::Policy::Modules::Prohib... (3pm)
- Avoid putting conditional lo...
- Perl::Critic::Policy::Modules::Prohib... (3)
- Ban modules that aren't blesse...
- Perl::Critic::Policy::Modules::Prohib... (3pm)
- Ban modules that aren't bles...
- Perl::Critic::Policy::Modules::Prohib... (3)
- Minimize complexity in code th...
- Perl::Critic::Policy::Modules::Prohib... (3pm)
- Minimize complexity in code ...
- Perl::Critic::Policy::Modules::Prohib... (3)
- Put packages (especially subcl...
- Perl::Critic::Policy::Modules::Prohib... (3pm)
- Put packages (especially sub...
- Perl::Critic::Policy::Modules::Requir... (3)
- End each module with an explic...
- Perl::Critic::Policy::Modules::Requir... (3pm)
- End each module with an expl...
- Perl::Critic::Policy::Modules::Requir... (3)
- Always make the "package" expl...
- Perl::Critic::Policy::Modules::Requir... (3pm)
- Always make the "package" ex...
- Perl::Critic::Policy::Modules::Requir... (3)
- Package declaration must match...
- Perl::Critic::Policy::Modules::Requir... (3)
- "use English" must be passed a...
- Perl::Critic::Policy::Modules::Requir... (3pm)
- "use English" must be passed...
- Perl::Critic::Policy::NamingConventio... (3)
- Distinguish different program ...
- Perl::Critic::Policy::NamingConventio... (3pm)
- Distinguish different progra...
- Perl::Critic::Policy::Objects::Prohib... (3)
- Prohibit indirect object call ...
- Perl::Critic::Policy::Objects::Prohib... (3pm)
- Prohibit indirect object cal...
- Perl::Critic::Policy::RegularExpressi... (3)
- Use named character classes in...
- Perl::Critic::Policy::RegularExpressi... (3pm)
- Use named character classes ...
- Perl::Critic::Policy::RegularExpressi... (3)
- Use character classes for lite...
- Perl::Critic::Policy::RegularExpressi... (3pm)
- Use character classes for li...
- Perl::Critic::Policy::RegularExpressi... (3)
- Use "eq" or hash instead of fi...
- Perl::Critic::Policy::RegularExpressi... (3pm)
- Use "eq" or hash instead of ...
- Perl::Critic::Policy::RegularExpressi... (3)
- Don't use $_ to match against ...
- Perl::Critic::Policy::RegularExpressi... (3pm)
- Don't use $_ to match agains...
- Perl::Critic::Policy::RegularExpressi... (3)
- Always use the "/s" modifier w...
- Perl::Critic::Policy::RegularExpressi... (3pm)
- Always use the "/s" modifier...
- Perl::Critic::Policy::RegularExpressi... (3)
- Always use the "/x" modifier w...
- Perl::Critic::Policy::RegularExpressi... (3pm)
- Always use the "/x" modifier...
- Perl::Critic::Policy::RegularExpressi... (3)
- Always use the "/m" modifier w...
- Perl::Critic::Policy::RegularExpressi... (3pm)
- Always use the "/m" modifier...
- Perl::Critic::Policy::Subroutines::Pr... (3)
- Don't call functions with a le...
- Perl::Critic::Policy::Subroutines::Pr... (3pm)
- Don't call functions with a ...
- Perl::Critic::Policy::Subroutines::Pr... (3)
- Return failure with bare "retu...
- Perl::Critic::Policy::Subroutines::Pr... (3pm)
- Return failure with bare "re...
- Perl::Critic::Policy::Subroutines::Pr... (3)
- Behavior of "sort" is not defi...
- Perl::Critic::Policy::Subroutines::Pr... (3pm)
- Behavior of "sort" is not de...
- Perl::Critic::Policy::Subroutines::Re... (3)
- End every path through a subro...
- Perl::Critic::Policy::Subroutines::Re... (3pm)
- End every path through a sub...
- Perl::Critic::Policy::TestingAndDebug... (3)
- Prohibit various flavors of "n...
- Perl::Critic::Policy::TestingAndDebug... (3pm)
- Prohibit various flavors of ...
- Perl::Critic::Policy::TestingAndDebug... (3)
- Prohibit various flavors of "n...
- Perl::Critic::Policy::TestingAndDebug... (3pm)
- Prohibit various flavors of ...
- Perl::Critic::Policy::TestingAndDebug... (3)
- Tests should all have labels.
- Perl::Critic::Policy::TestingAndDebug... (3pm)
- Tests should all have labels.
- Perl::Critic::Policy::ValuesAndExpres... (3)
- Don't use the comma operator a...
- Perl::Critic::Policy::ValuesAndExpres... (3pm)
- Don't use the comma operator...
- Perl::Critic::Policy::ValuesAndExpres... (3)
- Prohibit version values from o...
- Perl::Critic::Policy::ValuesAndExpres... (3pm)
- Prohibit version values from...
- Perl::Critic::Policy::ValuesAndExpres... (3)
- Use concatenation or HEREDOCs ...
- Perl::Critic::Policy::ValuesAndExpres... (3pm)
- Use concatenation or HEREDOC...
- Perl::Critic::Policy::ValuesAndExpres... (3)
- Long chains of method calls in...
- Perl::Critic::Policy::ValuesAndExpres... (3pm)
- Long chains of method calls ...
- Perl::Critic::Policy::ValuesAndExpres... (3)
- Don't use values that don't ex...
- Perl::Critic::Policy::ValuesAndExpres... (3pm)
- Don't use values that don't ...
- Perl::Critic::Policy::ValuesAndExpres... (3)
- Warns that you might have used...
- Perl::Critic::Policy::ValuesAndExpres... (3pm)
- Warns that you might have us...
- Perl::Critic::Policy::ValuesAndExpres... (3)
- Write " print <<'THE_END' " or...
- Perl::Critic::Policy::ValuesAndExpres... (3pm)
- Write " print <<'THE_END' " ...
- Perl::Critic::Policy::ValuesAndExpres... (3)
- Write " <<'THE_END'; " instead...
- Perl::Critic::Policy::ValuesAndExpres... (3pm)
- Write " <<'THE_END'; " inste...
- Perl::Critic::Policy::Variables::Proh... (3)
- Do not write " my $foo .= 'bar...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Do not write " my $foo .= 'b...
- Perl::Critic::Policy::Variables::Proh... (3)
- Do not write " my $foo = $bar ...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Do not write " my $foo = $ba...
- Perl::Critic::Policy::Variables::Proh... (3)
- Ban variables that aren't bles...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Ban variables that aren't bl...
- Perl::Critic::Policy::Variables::Proh... (3)
- Use "my" instead of "local", e...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Use "my" instead of "local",...
- Perl::Critic::Policy::Variables::Proh... (3)
- Avoid "$`", "$&", "$'" and the...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Avoid "$`", "$&", "$'" and t...
- Perl::Critic::Policy::Variables::Proh... (3)
- Eliminate globals declared wit...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Eliminate globals declared w...
- Perl::Critic::Policy::Variables::Proh... (3)
- Use double colon (::) to separ...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Use double colon (::) to sep...
- Perl::Critic::Policy::Variables::Proh... (3)
- Write "$EVAL_ERROR" instead of...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Write "$EVAL_ERROR" instead ...
- Perl::Critic::Policy::Variables::Proh... (3)
- Do not reuse a variable name i...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Do not reuse a variable name...
- Perl::Critic::Policy::Variables::Proh... (3)
- Don't ask for storage you don'...
- Perl::Critic::Policy::Variables::Proh... (3pm)
- Don't ask for storage you do...
- Perl::Critic::Policy::Variables::Requ... (3)
- Magic variables should be assi...
- Perl::Critic::Policy::Variables::Requ... (3pm)
- Magic variables should be as...
- Perl::Critic::Policy::Variables::Requ... (3)
- Negative array index should be...
- Perl::Critic::Policy::Variables::Requ... (3pm)
- Negative array index should ...
- Perl::Critic::PolicyParameter::Behavior (3)
- Default type-specific actions f...
- Perl::Critic::PolicyParameter::Behavior (3pm)
- Default type-specific actions...
- Perl::Critic::PolicyParameter::Behavi... (3)
- Actions appropriate for a bool...
- Perl::Critic::PolicyParameter::Behavi... (3pm)
- Actions appropriate for a bo...
- Perl::Critic::PolicyParameter::Behavi... (3)
- Actions appropriate for an enu...
- Perl::Critic::PolicyParameter::Behavi... (3pm)
- Actions appropriate for an e...
- Perl::Critic::PolicyParameter::Behavi... (3)
- Actions appropriate for an int...
- Perl::Critic::PolicyParameter::Behavi... (3pm)
- Actions appropriate for an i...
- Perl::Critic::PolicyParameter::Behavi... (3)
- Actions appropriate for a simp...
- Perl::Critic::PolicyParameter::Behavi... (3pm)
- Actions appropriate for a si...
- Perl::Critic::PolicyParameter::Behavi... (3)
- Actions appropriate for a para...
- Perl::Critic::PolicyParameter::Behavi... (3pm)
- Actions appropriate for a pa...
- Perl::Critic::PolicySummary (3)
- Descriptions of the Policy modules included...
- Perl::Critic::PolicySummary (3pm)
- Descriptions of the Policy modules includ...
- Perl::Critic::Theme (3)
- Construct thematic sets of policies.
- Perl::Critic::Theme (3pm)
- Construct thematic sets of policies.
- Perl::Critic::ThemeListing (3)
- List the themes of the installed Policies.
- Perl::Critic::ThemeListing (3pm)
- List the themes of the installed Policies.
- Perl::Critic::UserProfile (3)
- The contents of the user's profile, often .pe...
- Perl::Critic::UserProfile (3pm)
- The contents of the user's profile, often ....
- Perl::Critic::Utils::McCabe (3)
- Functions that calculate the McCabe score o...
- Perl::Critic::Utils::McCabe (3pm)
- Functions that calculate the McCabe score...
- Perl::Critic::Utils::POD (3)
- Utility functions for dealing with POD.
- Perl::Critic::Utils::POD (3pm)
- Utility functions for dealing with POD.
- Perl::Critic::Utils::PPI (3)
- Utility functions for dealing with PPI objects.
- Perl::Critic::Utils::PPI (3pm)
- Utility functions for dealing with PPI objects.
- Perl::Critic::Utils::Perl (3)
- Utility functions for dealing with Perl langu...
- Perl::Critic::Utils::Perl (3pm)
- Utility functions for dealing with Perl lan...
- Pod::Spell (3)
- a formatter for spellchecking Pod
- Pod::Spell (3pm)
- a formatter for spellchecking Pod
- Pod::Wordlist (3)
- English words that come up in Perl documentation
- Pod::Wordlist (3pm)
- English words that come up in Perl documentation
- RAND (7osslssl-3)
- the OpenSSL random generator
- RESET (7pg161)
- restore the value of a run-time parameter to the defau...
- RIPEMD160 (3osslssl-3)
- RIPEMD-160 hash function
- RSA (7osslssl-3)
- EVP_PKEY RSA keytype and algorithm support
- razor-agents (5)
- Collection of files for checking, reporting, and revok...
- Razor2::Errorhandler (3)
- Error handling mechanism for Razor.
- Razor2::Errorhandler (3pm)
- Error handling mechanism for Razor.
- Razor2::Preproc::deHTMLxs (3)
- Perl extension for libpreproc deHTMLxs code
- Razor2::Preproc::deHTMLxs (3pm)
- Perl extension for libpreproc deHTMLxs code
- Readonly (3)
- Facility for creating read-only scalars, arrays, hashes
- Readonly (3pm)
- Facility for creating read-only scalars, arrays, hashes
- Ref::Util (3)
- Utility functions for checking references
- Ref::Util (3pm)
- Utility functions for checking references
- Regexp::Common::URI::gopher (3)
- - Returns a pattern for gopher URIs.
- Regexp::Common::URI::gopher (3pm)
- - Returns a pattern for gopher URIs.
- Regexp::Common::URI::http (3)
- - Returns a pattern for HTTP URIs.
- Regexp::Common::URI::http (3pm)
- - Returns a pattern for HTTP URIs.
- Regexp::Common::URI::tel (3)
- - Returns a pattern for telephone URIs.
- Regexp::Common::URI::tel (3pm)
- - Returns a pattern for telephone URIs.
- Regexp::Common::balanced (3)
- - provide regexes for strings with balanced pa...
- Regexp::Common::balanced (3pm)
- - provide regexes for strings with balanced ...
- Regexp::Common::whitespace (3)
- - provides a regex for leading or trailing w...
- Regexp::Common::whitespace (3pm)
- - provides a regex for leading or trailing...
- Role::Tiny::With (3)
- Neat interface for consumers of Role::Tiny roles
- Role::Tiny::With (3pm)
- Neat interface for consumers of Role::Tiny roles
- sasl (n)
- Implementation of SASL mechanisms for Tcl
- selinux (8)
- NSA Security-Enhanced Linux (SELinux)
- SET (7pg161)
- change a run-time parameter
- SHA1 (3osslssl-3)
- Secure Hash Algorithm
- SHA256 (3osslssl-3)
- Secure Hash Algorithm
- sniproxy (8)
- transparent session based TLS and HTTP proxy
- SNMP (3)
- The Perl5 'SNMP' Extension Module for the Net-SNMP SNM...
- SQL::Dialects::Role (3)
- The role of being a SQL::Dialect
- SQL::Dialects::Role (3pm)
- The role of being a SQL::Dialect
- SQL::Statement::Placeholder (3)
- implements getting the next placeholder value
- SQL::Statement::Placeholder (3pm)
- implements getting the next placeholder v...
- SQL::Statement::Roadmap (3)
- Planned Enhancements for SQL::Statement and SQL...
- SQL::Statement::Roadmap (3pm)
- Planned Enhancements for SQL::Statement and S...
- sshfs (1)
- filesystem client based on ssh
- showconsole (8)
- determines the real tty of stdin
- rec (1)
- Sound eXchange, the Swiss Army knife of audio manipula...
- soxeffect (7)
- Sound eXchange, the Swiss Army knife of audio manipula...
- soxi (1)
- Sound eXchange Information, display sound file metadata
- Socket6 (3)
- IPv6 related part of the C socket.h defines and struct...
- Socket6 (3pm)
- IPv6 related part of the C socket.h defines and struct...
- source-highlight (1)
- convert source code to syntax highlighted document
- source-highlight-settings (1)
- utility that can be used to write a configura...
- Specio::Coercion (3)
- A class representing a coercion from one type to another
- Specio::Constraint::AnyCan (3)
- A class for constraints which require a clas...
- Specio::Constraint::AnyCan (3pm)
- A class for constraints which require a cl...
- Specio::Constraint::AnyDoes (3)
- A class for constraints which require a cla...
- Specio::Constraint::AnyDoes (3pm)
- A class for constraints which require a c...
- Specio::Constraint::AnyIsa (3)
- A class for constraints which require a clas...
- Specio::Constraint::AnyIsa (3pm)
- A class for constraints which require a cl...
- Specio::Constraint::Enum (3)
- A class for constraints which require a string...
- Specio::Constraint::Enum (3pm)
- A class for constraints which require a stri...
- Specio::Constraint::ObjectCan (3)
- A class for constraints which require an ...
- Specio::Constraint::ObjectCan (3pm)
- A class for constraints which require a...
- Specio::Constraint::ObjectDoes (3)
- A class for constraints which require an...
- Specio::Constraint::ObjectDoes (3pm)
- A class for constraints which require ...
- Specio::Constraint::ObjectIsa (3)
- A class for constraints which require an ...
- Specio::Constraint::ObjectIsa (3pm)
- A class for constraints which require a...
- Specio::Constraint::Parameterizable (3)
- A class which represents parameteri...
- Specio::Constraint::Parameterizable (3pm)
- A class which represents paramete...
- Specio::Constraint::Parameterized (3)
- A class which represents parameterize...
- Specio::Constraint::Parameterized (3pm)
- A class which represents parameteri...
- Specio::Constraint::Role::Interface (3)
- The interface all type constraints ...
- Specio::Constraint::Role::Interface (3pm)
- The interface all type constraint...
- Specio::Constraint::Structurable (3)
- A class which represents structurable ...
- Specio::Constraint::Structurable (3pm)
- A class which represents structurabl...
- Specio::Constraint::Structured (3)
- A class which represents structured cons...
- Specio::Constraint::Structured (3pm)
- A class which represents structured co...
- Specio::DeclaredAt (3)
- A class to represent where a type or coercion was de...
- Specio::DeclaredAt (3pm)
- A class to represent where a type or coercion was ...
- Specio::Helpers (3)
- Helper subs for the Specio distro
- Specio::Helpers (3pm)
- Helper subs for the Specio distro
- Specio::Registry (3)
- Implements the per-package type registry
- Specio::Registry (3pm)
- Implements the per-package type registry
- Specio::Role::Inlinable (3)
- A role for things which can be inlined (type co...
- Specio::Role::Inlinable (3pm)
- A role for things which can be inlined (type ...
- Specio::TypeChecks (3)
- Type checks used internally for Specio classes (it's...
- Specio::TypeChecks (3pm)
- Type checks used internally for Specio classes (it...
- splashy (1)
- a user-mode, POSIX and LSB compliant, boot splashing s...
- splashy-config.xml (5)
- a user-mode, POSIX and LSB compliant, boot splashing...
- start_daemon (8)
- Start processes identified by path name
- String::Format (3)
- sprintf-like string formatting capabilities with arbit...
- String::Format (3pm)
- sprintf-like string formatting capabilities with arbit...
- Sub::Defer (3)
- Defer generation of subroutines until they are first c...
- Sub::Defer (3pm)
- Defer generation of subroutines until they are first c...
- Sub::Exporter (3)
- a sophisticated exporter for custom-built routines
- Sub::Exporter (3pm)
- a sophisticated exporter for custom-built routines
- Sub::Exporter::Tutorial (3)
- a friendly guide to exporting with Sub::Exporter
- Sub::Exporter::Tutorial (3pm)
- a friendly guide to exporting with Sub::Exporter
- Sub::Uplevel (3)
- apparently run a function in a higher stack frame
- Sub::Uplevel (3pm)
- apparently run a function in a higher stack frame
- Switch (3)
- A switch statement for Perl, do not use if you can use...
- Switch (3pm)
- A switch statement for Perl, do not use if you can use...
- TAILQ_HEAD (3)
- implementations of lists, tail queues, and circular qu...
- TAILQ_HEAD (3bsd)
- implementations of singly-linked lists, singly-linked ...
- TAILQ_INSERT_HEAD (3)
- implementations of lists, tail queues, and circular q...
- TAILQ_INSERT_HEAD (3bsd)
- implementations of singly-linked lists, singly-lin...
- TAP::Base (3)
- Base class that provides common functionality to TAP::...
- TAP::Base (3pm)
- Base class that provides common functionality to TAP::...
- TAP::Formatter::Base (3)
- Base class for harness output delegates
- TAP::Formatter::Base (3pm)
- Base class for harness output delegates
- TAP::Formatter::Color (3)
- Run Perl test scripts with color
- TAP::Formatter::Color (3pm)
- Run Perl test scripts with color
- TAP::Formatter::Console (3)
- Harness output delegate for default console output
- TAP::Formatter::Console (3pm)
- Harness output delegate for default console o...
- TAP::Formatter::Console::ParallelSession (3)
- Harness output delegate for pa...
- TAP::Formatter::Console::ParallelSession (3pm)
- Harness output delegate for ...
- TAP::Formatter::Console::Session (3)
- Harness output delegate for default co...
- TAP::Formatter::Console::Session (3pm)
- Harness output delegate for default ...
- TAP::Formatter::File (3)
- Harness output delegate for file output
- TAP::Formatter::File (3pm)
- Harness output delegate for file output
- TAP::Formatter::File::Session (3)
- Harness output delegate for file output
- TAP::Formatter::File::Session (3pm)
- Harness output delegate for file output
- TAP::Formatter::Session (3)
- Abstract base class for harness output delegate
- TAP::Formatter::Session (3pm)
- Abstract base class for harness output delegate
- TAP::Harness (3)
- Run test scripts with statistics
- TAP::Harness (3pm)
- Run test scripts with statistics
- TAP::Harness::Beyond (3)
- Beyond make test
- TAP::Harness::Beyond (3pm)
- Beyond make test
- TAP::Harness::Env (3)
- Parsing harness related environmental variables where...
- TAP::Harness::Env (3pm)
- Parsing harness related environmental variables whe...
- TAP::Object (3)
- Base class that provides common functionality to all "...
- TAP::Object (3pm)
- Base class that provides common functionality to all "...
- TAP::Parser::Grammar (3)
- A grammar for the Test Anything Protocol.
- TAP::Parser::Grammar (3pm)
- A grammar for the Test Anything Protocol.
- TAP::Parser::Iterator::Stream (3)
- Iterator for filehandle-based TAP sources
- TAP::Parser::Iterator::Stream (3pm)
- Iterator for filehandle-based TAP sources
- TAP::Parser::IteratorFactory (3)
- Figures out which SourceHandler objects to...
- TAP::Parser::IteratorFactory (3pm)
- Figures out which SourceHandler objects ...
- TAP::Parser::Scheduler (3)
- Schedule tests during parallel testing
- TAP::Parser::Scheduler (3pm)
- Schedule tests during parallel testing
- TAP::Parser::Scheduler::Job (3)
- A single testing job.
- TAP::Parser::Scheduler::Job (3pm)
- A single testing job.
- TAP::Parser::Scheduler::Spinner (3)
- A no-op job.
- TAP::Parser::Scheduler::Spinner (3pm)
- A no-op job.
- TAP::Parser::SourceHandler (3)
- Base class for different TAP source handlers
- TAP::Parser::SourceHandler (3pm)
- Base class for different TAP source handlers
- TAP::Parser::SourceHandler::Executable (3)
- Stream output from an executable...
- TAP::Parser::SourceHandler::Executable (3pm)
- Stream output from an executab...
- TAP::Parser::SourceHandler::File (3)
- Stream TAP from a text file.
- TAP::Parser::SourceHandler::File (3pm)
- Stream TAP from a text file.
- TAP::Parser::SourceHandler::Handle (3)
- Stream TAP from an IO::Handle or a G...
- TAP::Parser::SourceHandler::Handle (3pm)
- Stream TAP from an IO::Handle or a...
- TAP::Parser::SourceHandler::Perl (3)
- Stream TAP from a Perl executable
- TAP::Parser::SourceHandler::Perl (3pm)
- Stream TAP from a Perl executable
- TAP::Parser::SourceHandler::RawTAP (3)
- Stream output from raw TAP in a scal...
- TAP::Parser::SourceHandler::RawTAP (3pm)
- Stream output from raw TAP in a sc...
- TAP::Parser::YAMLish::Reader (3)
- Read YAMLish data from iterator
- TAP::Parser::YAMLish::Reader (3pm)
- Read YAMLish data from iterator
- TAP::Parser::YAMLish::Writer (3)
- Write YAMLish data
- TAP::Parser::YAMLish::Writer (3pm)
- Write YAMLish data
- tali (6)
- A variation on poker with dice and less money.
- Task::Weaken (3)
- Ensure that a platform has weaken support
- Task::Weaken (3pm)
- Ensure that a platform has weaken support
- Term::Table (3)
- Format a header and rows into a table
- Term::Table (3pm)
- Format a header and rows into a table
- Term::Table::HashBase (3)
- Build hash based classes.
- Term::Table::HashBase (3pm)
- Build hash based classes.
- Test2 (3)
- Framework for writing test tools that all work together.
- Test2 (3pm)
- Framework for writing test tools that all work together.
- Test2::API::Breakage (3)
- What breaks at what version
- Test2::API::Breakage (3pm)
- What breaks at what version
- Test2::API::Instance (3)
- Object used by Test2::API under the hood
- Test2::API::Instance (3pm)
- Object used by Test2::API under the hood
- Test2::API::InterceptResult::Hub (3)
- Hub used by InterceptResult.
- Test2::API::InterceptResult::Hub (3pm)
- Hub used by InterceptResult.
- Test2::API::InterceptResult::Squasher (3)
- Encapsulation of the algorithm th...
- Test2::API::InterceptResult::Squasher (3pm)
- Encapsulation of the algorithm ...
- Test2::API::Stack (3)
- Object to manage a stack of Test2::Hub instances.
- Test2::API::Stack (3pm)
- Object to manage a stack of Test2::Hub instances.
- Test2::AsyncSubtest::Event::Attach (3)
- Event to attach a subtest to the par...
- Test2::AsyncSubtest::Event::Attach (3pm)
- Event to attach a subtest to the p...
- Test2::AsyncSubtest::Event::Detach (3)
- Event to detach a subtest from the p...
- Test2::AsyncSubtest::Event::Detach (3pm)
- Event to detach a subtest from the...
- Test2::AsyncSubtest::Hub (3)
- Hub used by async subtests.
- Test2::AsyncSubtest::Hub (3pm)
- Hub used by async subtests.
- Test2::Compare::Custom (3)
- Custom field check for comparisons.
- Test2::Compare::Custom (3pm)
- Custom field check for comparisons.
- Test2::Compare::Float (3)
- Compare two values as numbers with tolerance.
- Test2::Compare::Float (3pm)
- Compare two values as numbers with tolerance.
- Test2::Compare::Hash (3)
- Representation of a hash in a deep comparison.
- Test2::Compare::Hash (3pm)
- Representation of a hash in a deep comparison.
- Test2::Compare::Isa (3)
- Check if the value is an instance of the class.
- Test2::Compare::Isa (3pm)
- Check if the value is an instance of the class.
- Test2::Compare::Meta (3)
- Check library for meta-checks
- Test2::Compare::Meta (3pm)
- Check library for meta-checks
- Test2::Compare::Negatable (3)
- Poor mans 'role' for compare objects that can...
- Test2::Compare::Negatable (3pm)
- Poor mans 'role' for compare objects that c...
- Test2::Compare::Set (3)
- Allows a field to be matched against a set of checks.
- Test2::Compare::Set (3pm)
- Allows a field to be matched against a set of che...
- Test2::Compare::Undef (3)
- Check that something is undefined
- Test2::Compare::Undef (3pm)
- Check that something is undefined
- Test2::Compare::Wildcard (3)
- Placeholder check.
- Test2::Compare::Wildcard (3pm)
- Placeholder check.
- Test2::Event::Encoding (3)
- Set the encoding for the output stream
- Test2::Event::Encoding (3pm)
- Set the encoding for the output stream
- Test2::Event::Plan (3)
- The event of a plan
- Test2::Event::Plan (3pm)
- The event of a plan
- Test2::Event::Waiting (3)
- Tell all procs/threads it is time to be done
- Test2::Event::Waiting (3pm)
- Tell all procs/threads it is time to be done
- Test2::EventFacet::About (3)
- Facet with event details.
- Test2::EventFacet::About (3pm)
- Facet with event details.
- Test2::EventFacet::Control (3)
- Facet for hub actions and behaviors.
- Test2::EventFacet::Control (3pm)
- Facet for hub actions and behaviors.
- Test2::EventFacet::Error (3)
- Facet for errors that need to be shown.
- Test2::EventFacet::Error (3pm)
- Facet for errors that need to be shown.
- Test2::EventFacet::Hub (3)
- Facet for the hubs an event passes through.
- Test2::EventFacet::Hub (3pm)
- Facet for the hubs an event passes through.
- Test2::EventFacet::Info (3)
- Facet for information a developer might care ab...
- Test2::EventFacet::Info (3pm)
- Facet for information a developer might care ...
- Test2::EventFacet::Parent (3)
- Facet for events contains other events
- Test2::EventFacet::Parent (3pm)
- Facet for events contains other events
- Test2::EventFacet::Plan (3)
- Facet for setting the plan
- Test2::EventFacet::Plan (3pm)
- Facet for setting the plan
- Test2::EventFacet::Render (3)
- Facet that dictates how to render an event.
- Test2::EventFacet::Render (3pm)
- Facet that dictates how to render an event.
- Test2::Hub (3)
- The conduit through which all events flow.
- Test2::Hub (3pm)
- The conduit through which all events flow.
- Test2::Hub::Interceptor (3)
- Hub used by interceptor to grab results.
- Test2::Hub::Interceptor (3pm)
- Hub used by interceptor to grab results.
- Test2::Hub::Interceptor::Terminator (3)
- Exception class used by Test2::Hub:...
- Test2::Hub::Interceptor::Terminator (3pm)
- Exception class used by Test2::Hu...
- Test2::Hub::Subtest (3)
- Hub used by subtests
- Test2::Hub::Subtest (3pm)
- Hub used by subtests
- Test2::IPC (3)
- Turn on IPC for threading or forking support.
- Test2::IPC (3pm)
- Turn on IPC for threading or forking support.
- Test2::Manual (3)
- Documentation hub for Test2 and Test2-Suite.
- Test2::Manual (3pm)
- Documentation hub for Test2 and Test2-Suite.
- Test2::Manual::Anatomy (3)
- The hub for documentation of the inner workings ...
- Test2::Manual::Anatomy (3pm)
- The hub for documentation of the inner working...
- Test2::Manual::Anatomy::API (3)
- Internals documentation for the API.
- Test2::Manual::Anatomy::API (3pm)
- Internals documentation for the API.
- Test2::Manual::Anatomy::Context (3)
- Internals documentation for the Context...
- Test2::Manual::Anatomy::Context (3pm)
- Internals documentation for the Conte...
- Test2::Manual::Anatomy::EndToEnd (3)
- Overview of Test2 from load to finish.
- Test2::Manual::Anatomy::EndToEnd (3pm)
- Overview of Test2 from load to finish.
- Test2::Manual::Anatomy::Event (3)
- The internals of events
- Test2::Manual::Anatomy::Event (3pm)
- The internals of events
- Test2::Manual::Anatomy::Hubs (3)
- Internals documentation for the hub stack,...
- Test2::Manual::Anatomy::Hubs (3pm)
- Internals documentation for the hub stac...
- Test2::Manual::Anatomy::IPC (3)
- Manual for the IPC system.
- Test2::Manual::Anatomy::IPC (3pm)
- Manual for the IPC system.
- Test2::Manual::Contributing (3)
- How to contribute to the Test2 project.
- Test2::Manual::Contributing (3pm)
- How to contribute to the Test2 project.
- Test2::Manual::Testing (3)
- Hub for documentation about writing tests with T...
- Test2::Manual::Testing (3pm)
- Hub for documentation about writing tests with...
- Test2::Manual::Testing::Introduction (3)
- Introduction to testing with Test2.
- Test2::Manual::Testing::Introduction (3pm)
- Introduction to testing with Test2.
- Test2::Manual::Testing::Migrating (3)
- How to migrate existing tests from Te...
- Test2::Manual::Testing::Migrating (3pm)
- How to migrate existing tests from ...
- Test2::Manual::Testing::Planning (3)
- The many ways to set a plan.
- Test2::Manual::Testing::Planning (3pm)
- The many ways to set a plan.
- Test2::Manual::Tooling (3)
- Manual page for tool authors.
- Test2::Manual::Tooling (3pm)
- Manual page for tool authors.
- Test2::Manual::Tooling::FirstTool (3)
- Write your first tool with Test2.
- Test2::Manual::Tooling::FirstTool (3pm)
- Write your first tool with Test2.
- Test2::Manual::Tooling::Formatter (3)
- How to write a custom formatter, in o...
- Test2::Manual::Tooling::Formatter (3pm)
- How to write a custom formatter, in...
- Test2::Manual::Tooling::Nesting (3)
- Tutorial for using other tools within y...
- Test2::Manual::Tooling::Nesting (3pm)
- Tutorial for using other tools within...
- Test2::Manual::Tooling::Plugin::TestExit (3)
- How to safely add pre-exit beh...
- Test2::Manual::Tooling::Plugin::TestExit (3pm)
- How to safely add pre-exit b...
- Test2::Manual::Tooling::Plugin::Testi... (3)
- Run code when the test file is...
- Test2::Manual::Tooling::Plugin::Testi... (3pm)
- Run code when the test file ...
- Test2::Manual::Tooling::Plugin::ToolC... (3)
- How to add behaviors that occu...
- Test2::Manual::Tooling::Plugin::ToolC... (3pm)
- How to add behaviors that oc...
- Test2::Manual::Tooling::Plugin::ToolS... (3)
- How to add behaviors that occu...
- Test2::Manual::Tooling::Plugin::ToolS... (3pm)
- How to add behaviors that oc...
- Test2::Manual::Tooling::Subtest (3)
- How to implement a tool that makes use ...
- Test2::Manual::Tooling::Subtest (3pm)
- How to implement a tool that makes us...
- Test2::Manual::Tooling::TestBuilder (3)
- This section maps Test::Builder met...
- Test2::Manual::Tooling::TestBuilder (3pm)
- This section maps Test::Builder m...
- Test2::Manual::Tooling::Testing (3)
- Tutorial on how to test your testing to...
- Test2::Manual::Tooling::Testing (3pm)
- Tutorial on how to test your testing ...
- Test2::Plugin::BailOnFail (3)
- Automatically bail out of testing on the firs...
- Test2::Plugin::BailOnFail (3pm)
- Automatically bail out of testing on the fi...
- Test2::Plugin::DieOnFail (3)
- Automatically die on the first test failure.
- Test2::Plugin::DieOnFail (3pm)
- Automatically die on the first test failure.
- Test2::Plugin::ExitSummary (3)
- Add extra diagnostics on failure at the end ...
- Test2::Plugin::ExitSummary (3pm)
- Add extra diagnostics on failure at the en...
- Test2::Plugin::SRand (3)
- Control the random seed for more controlled test e...
- Test2::Plugin::SRand (3pm)
- Control the random seed for more controlled test...
- Test2::Plugin::Times (3)
- Output timing data at the end of the test.
- Test2::Plugin::Times (3pm)
- Output timing data at the end of the test.
- Test2::Plugin::UTF8 (3)
- Test2 plugin to test with utf8.
- Test2::Plugin::UTF8 (3pm)
- Test2 plugin to test with utf8.
- Test2::Require::AuthorTesting (3)
- Only run a test when the AUTHOR_TESTING e...
- Test2::Require::AuthorTesting (3pm)
- Only run a test when the AUTHOR_TESTING...
- Test2::Require::EnvVar (3)
- Only run a test when a specific environment vari...
- Test2::Require::EnvVar (3pm)
- Only run a test when a specific environment va...
- Test2::Require::Fork (3)
- Skip a test file unless the system supports forking
- Test2::Require::Fork (3pm)
- Skip a test file unless the system supports forking
- Test2::Require::Perl (3)
- Skip the test unless the necessary version of Perl...
- Test2::Require::Perl (3pm)
- Skip the test unless the necessary version of Pe...
- Test2::Require::RealFork (3)
- Skip a test file unless the system supports tr...
- Test2::Require::RealFork (3pm)
- Skip a test file unless the system supports ...
- Test2::Require::Threads (3)
- Skip a test file unless the system supports thr...
- Test2::Require::Threads (3pm)
- Skip a test file unless the system supports t...
- Test2::Suite (3)
- Distribution with a rich set of tools built upon the T...
- Test2::Suite (3pm)
- Distribution with a rich set of tools built upon the T...
- Test2::Tools::Basic (3)
- Test2 implementation of the basic testing tools.
- Test2::Tools::Basic (3pm)
- Test2 implementation of the basic testing tools.
- Test2::Tools::Class (3)
- Test2 implementation of the tools for testing classes.
- Test2::Tools::Class (3pm)
- Test2 implementation of the tools for testing cla...
- Test2::Tools::Defer (3)
- Write tests that get executed at a later time
- Test2::Tools::Defer (3pm)
- Write tests that get executed at a later time
- Test2::Tools::Encoding (3)
- Tools for managing the encoding of Test2 based t...
- Test2::Tools::Encoding (3pm)
- Tools for managing the encoding of Test2 based...
- Test2::Tools::Exception (3)
- Test2 based tools for checking exceptions
- Test2::Tools::Exception (3pm)
- Test2 based tools for checking exceptions
- Test2::Tools::Grab (3)
- Temporarily intercept all events without adding a sc...
- Test2::Tools::Grab (3pm)
- Temporarily intercept all events without adding a ...
- Test2::Tools::Target (3)
- Alias the testing target package.
- Test2::Tools::Target (3pm)
- Alias the testing target package.
- Test2::Tools::Tester (3)
- Tools to help you test other testing tools.
- Test2::Tools::Tester (3pm)
- Tools to help you test other testing tools.
- Test2::Tools::Tiny (3)
- Tiny set of tools for unfortunate souls who cannot u...
- Test2::Tools::Tiny (3pm)
- Tiny set of tools for unfortunate souls who cannot...
- Test2::Transition (3)
- Transition notes when upgrading to Test2
- Test2::Transition (3pm)
- Transition notes when upgrading to Test2
- Test2::Util::ExternalMeta (3)
- Allow third party tools to safely attach meta...
- Test2::Util::ExternalMeta (3pm)
- Allow third party tools to safely attach me...
- Test2::Util::Facets2Legacy (3)
- Convert facet data to the legacy event API.
- Test2::Util::Facets2Legacy (3pm)
- Convert facet data to the legacy event API.
- Test2::Util::HashBase (3)
- Build hash based classes.
- Test2::Util::HashBase (3pm)
- Build hash based classes.
- Test2::Util::Stash (3)
- Utilities for manipulating stashes and globs.
- Test2::Util::Stash (3pm)
- Utilities for manipulating stashes and globs.
- Test2::Util::Table (3)
- Format a header and rows into a table
- Test2::Util::Table (3pm)
- Format a header and rows into a table
- Test2::Util::Times (3)
- Format timing/benchmark information.
- Test2::Util::Times (3pm)
- Format timing/benchmark information.
- Test2::V0 (3)
- 0Th edition of the Test2 recommended bundle.
- Test2::V0 (3pm)
- 0Th edition of the Test2 recommended bundle.
- Test2::Workflow::Runner (3)
- Runs the workflows.
- Test2::Workflow::Runner (3pm)
- Runs the workflows.
- Test::Builder::Tester (3)
- test testsuites that have been built with Test::B...
- Test::Builder::Tester (3pm)
- test testsuites that have been built with Test:...
- Test::Deep::ArrayEach (3)
- (unknown subject)
- Test::Deep::ArrayEach (3pm)
- (unknown subject)
- Test::Deep::ArrayLength (3)
- (unknown subject)
- Test::Deep::ArrayLength (3pm)
- (unknown subject)
- Test::Deep::ArrayLengthOnly (3)
- (unknown subject)
- Test::Deep::ArrayLengthOnly (3pm)
- (unknown subject)
- Test::Deep::Cache (3)
- (unknown subject)
- Test::Deep::Cache (3pm)
- (unknown subject)
- Test::Deep::Cache::Simple (3)
- (unknown subject)
- Test::Deep::Cache::Simple (3pm)
- (unknown subject)
- Test::Deep::Hash (3)
- (unknown subject)
- Test::Deep::Hash (3pm)
- (unknown subject)
- Test::Deep::HashEach (3)
- (unknown subject)
- Test::Deep::HashEach (3pm)
- (unknown subject)
- Test::Deep::HashElements (3)
- (unknown subject)
- Test::Deep::HashElements (3pm)
- (unknown subject)
- Test::Deep::HashKeys (3)
- (unknown subject)
- Test::Deep::HashKeys (3pm)
- (unknown subject)
- Test::Deep::HashKeysOnly (3)
- (unknown subject)
- Test::Deep::HashKeysOnly (3pm)
- (unknown subject)
- Test::Deep::ListMethods (3)
- (unknown subject)
- Test::Deep::ListMethods (3pm)
- (unknown subject)
- Test::Deep::Methods (3)
- (unknown subject)
- Test::Deep::Methods (3pm)
- (unknown subject)
- Test::Deep::NoTest (3)
- Use Test::Deep outside of the testing framework
- Test::Deep::NoTest (3pm)
- Use Test::Deep outside of the testing framework
- Test::Deep::RegexpMatches (3)
- (unknown subject)
- Test::Deep::RegexpMatches (3pm)
- (unknown subject)
- Test::Deep::Shallow (3)
- (unknown subject)
- Test::Deep::Shallow (3pm)
- (unknown subject)
- Test::Differences (3)
- Test strings and data structures and show differences...
- Test::Differences (3pm)
- Test strings and data structures and show differenc...
- Test::FailWarnings (3)
- Add test failures if warnings are caught
- Test::FailWarnings (3pm)
- Add test failures if warnings are caught
- Test::Fatal (3)
- incredibly simple helpers for testing code with except...
- Test::Fatal (3pm)
- incredibly simple helpers for testing code with except...
- Test::File::ShareDir (3)
- Create a Fake ShareDir for your modules for testing.
- Test::File::ShareDir (3pm)
- Create a Fake ShareDir for your modules for test...
- Test::File::ShareDir::Dist (3)
- Simplified dist oriented ShareDir tester
- Test::File::ShareDir::Dist (3pm)
- Simplified dist oriented ShareDir tester
- Test::File::ShareDir::Module (3)
- Simplified module oriented ShareDir tester
- Test::File::ShareDir::Module (3pm)
- Simplified module oriented ShareDir tester
- Test::File::ShareDir::Object::Dist (3)
- Object Oriented ShareDir creation fo...
- Test::File::ShareDir::Object::Dist (3pm)
- Object Oriented ShareDir creation ...
- Test::File::ShareDir::Object::Inc (3)
- Shared tempdir object code to inject ...
- Test::File::ShareDir::Object::Inc (3pm)
- Shared tempdir object code to injec...
- Test::File::ShareDir::Object::Module (3)
- Object Oriented ShareDir creation ...
- Test::File::ShareDir::Object::Module (3pm)
- Object Oriented ShareDir creatio...
- Test::File::ShareDir::TempDirObject (3)
- Internal Object to make code simpler.
- Test::File::ShareDir::TempDirObject (3pm)
- Internal Object to make code simp...
- Test::File::ShareDir::Utils (3)
- Simple utilities for File::ShareDir testing
- Test::File::ShareDir::Utils (3pm)
- Simple utilities for File::ShareDir testing
- Test::Harness (3)
- Run Perl standard test scripts with statistics
- Test::Harness (3pm)
- Run Perl standard test scripts with statistics
- Test::LeakTrace::Script (3)
- A LeakTrace interface for whole scripts
- Test::LeakTrace::Script (3pm)
- A LeakTrace interface for whole scripts
- Test::MockRandom (3)
- Replaces random number generation with non-random numb...
- Test::MockRandom (3pm)
- Replaces random number generation with non-random nu...
- Test::More (3)
- yet another framework for writing test scripts
- Test::More (3pm)
- yet another framework for writing test scripts
- Test::Needs (3)
- Skip tests when modules not available
- Test::Needs (3pm)
- Skip tests when modules not available
- Test::NoWarnings (3)
- Make sure you didn't emit any warnings while testing
- Test::NoWarnings (3pm)
- Make sure you didn't emit any warnings while testing
- Test::Number::Delta (3)
- Compare the difference between numbers against a gi...
- Test::Number::Delta (3pm)
- Compare the difference between numbers against a ...
- Test::Object (3)
- Thoroughly testing objects via registered handlers
- Test::Object (3pm)
- Thoroughly testing objects via registered handlers
- Test::Pod (3)
- check for POD errors in files
- Test::Pod (3pm)
- check for POD errors in files
- Test::Requires (3)
- Checks to see if the module can be loaded
- Test::Requires (3pm)
- Checks to see if the module can be loaded
- Test::Specio (3)
- Test helpers for Specio
- Test::Specio (3pm)
- Test helpers for Specio
- Test::SubCalls (3)
- Track the number of times subs are called
- Test::SubCalls (3pm)
- Track the number of times subs are called
- Test::Tester (3)
- Ease testing test modules built with Test::Builder
- Test::Tester (3pm)
- Ease testing test modules built with Test::Builder
- Test::Tester::Capture (3)
- Help testing test modules built with Test::Builder
- Test::Tester::Capture (3pm)
- Help testing test modules built with Test::Builder
- Test::Tester::CaptureRunner (3)
- Help testing test modules built with Test::...
- Test::Tester::CaptureRunner (3pm)
- Help testing test modules built with Test...
- Test::Warn (3)
- Perl extension to test methods for warnings
- Test::Warn (3pm)
- Perl extension to test methods for warnings
- Test::Warnings (3)
- Test for warnings and the lack of them
- Test::Warnings (3pm)
- Test for warnings and the lack of them
- Test::Without::Module (3)
- Test fallback behaviour in absence of modules
- Test::Without::Module (3pm)
- Test fallback behaviour in absence of modules
- XML::XPath::Node::Text (3)
- an XML text node
- XML::XPath::Node::Text (3pm)
- an XML text node
- Thread (3)
- Manipulate threads in Perl (for old code only)
- Throwable (3)
- a role for classes that can be thrown
- Throwable (3pm)
- a role for classes that can be thrown
- Throwable::Error (3)
- an easy-to-use class for error objects
- Throwable::Error (3pm)
- an easy-to-use class for error objects
- Thunar (1)
- File Manager for the Xfce Desktop Environment
- Time::HiRes (3)
- High resolution alarm, sleep, gettimeofday, interval t...
- Time::HiRes (3pm)
- High resolution alarm, sleep, gettimeofday, interval t...
- Try::Tiny (3)
- Minimal try/catch with proper preservation of $@
- Try::Tiny (3pm)
- minimal try/catch with proper preservation of $@
- URI::Escape (3)
- Percent-encode and percent-decode unsafe characters
- URI::Escape (3pm)
- Percent-encode and percent-decode unsafe characters
- URI::Heuristic (3)
- Expand URI using heuristics
- URI::Heuristic (3pm)
- Expand URI using heuristics
- URI::QueryParam (3)
- Additional query methods for URIs
- URI::QueryParam (3pm)
- Additional query methods for URIs
- URI::WithBase (3)
- URIs which remember their base
- URI::WithBase (3pm)
- URIs which remember their base
- URI::data (3)
- URI that contains immediate data
- URI::data (3pm)
- URI that contains immediate data
- URI::file (3)
- URI that maps to local file names
- URI::file (3pm)
- URI that maps to local file names
- unrtf (1)
- converts document in RTF format to other formats
- unicode (7)
- universal character set
- Unicode::GCString (3)
- String as Sequence of UAX #29 Grapheme Clusters
- Unicode::GCString (3pm)
- String as Sequence of UAX #29 Grapheme Clusters
- Unicode::LineBreak (3)
- UAX #14 Unicode Line Breaking Algorithm
- Unicode::LineBreak (3pm)
- UAX #14 Unicode Line Breaking Algorithm
- usleep (1)
- sleep for the specified number of microseconds
- vhangup (8)
- Cause a virtually hangup on the specified terminals
- wget (1)
- The non-interactive network downloader.
- Win32::DBIODBC (3)
- Win32::ODBC emulation layer for the DBI
- Win32::DBIODBC (3pm)
- Win32::ODBC emulation layer for the DBI
- XcursorGetTheme (3)
- Cursor management library
- XML::DOM::CharacterData (3)
- Common interface for Text, CDATASections and Co...
- XML::DOM::CharacterData (3pm)
- Common interface for Text, CDATASections and ...
- XML::DOM::NamedNodeMap (3)
- A hash table interface for XML::DOM
- XML::DOM::NamedNodeMap (3pm)
- A hash table interface for XML::DOM
- XML::DOM::Parser (3)
- An XML::Parser that builds XML::DOM document structures
- XML::DOM::Parser (3pm)
- An XML::Parser that builds XML::DOM document structures
- XML::DOM::PerlSAX (3)
- Old name of XML::Handler::BuildDOM
- XML::DOM::PerlSAX (3pm)
- Old name of XML::Handler::BuildDOM
- XML::Handler::BuildDOM (3)
- PerlSAX handler that creates XML::DOM document s...
- XML::Handler::BuildDOM (3pm)
- PerlSAX handler that creates XML::DOM document...
- XML::Handler::CanonXMLWriter (3)
- output XML in canonical XML format
- XML::Handler::CanonXMLWriter (3pm)
- output XML in canonical XML format
- XML::Handler::Sample (3)
- a trivial PerlSAX handler
- XML::Handler::Sample (3pm)
- a trivial PerlSAX handler
- XML::Handler::Subs (3)
- a PerlSAX handler base class for calling user-define...
- XML::Handler::Subs (3pm)
- a PerlSAX handler base class for calling user-defi...
- XML::Handler::XMLWriter (3)
- a PerlSAX handler for writing readable XML
- XML::Handler::XMLWriter (3pm)
- a PerlSAX handler for writing readable XML
- XML::LibXML::AttributeHash (3)
- tie an XML::LibXML::Element to a hash to acc...
- XML::LibXML::AttributeHash (3pm)
- tie an XML::LibXML::Element to a hash to a...
- XML::LibXML::Common (3)
- Constants and Character Encoding Routines
- XML::LibXML::Common (3pm)
- Constants and Character Encoding Routines
- XML::LibXML::Dtd (3)
- XML::LibXML DTD Handling
- XML::LibXML::Dtd (3pm)
- XML::LibXML DTD Handling
- XML::LibXML::ErrNo (3pm)
- Structured Errors This module is based on xmlerror...
- XML::LibXML::Parser (3)
- Parsing XML Data with XML::LibXML
- XML::LibXML::Parser (3pm)
- Parsing XML Data with XML::LibXML
- XML::LibXML::Pattern (3)
- XML::LibXML::Pattern - interface to libxml2 XPath ...
- XML::LibXML::RelaxNG (3)
- RelaxNG Schema Validation
- XML::LibXML::RelaxNG (3pm)
- RelaxNG Schema Validation
- XML::LibXML::Schema (3)
- XML Schema Validation
- XML::LibXML::Schema (3pm)
- XML Schema Validation
- XML::LibXML::XPathContext (3)
- XPath Evaluation
- XML::LibXML::XPathContext (3pm)
- XPath Evaluation
- XML::LibXML::XPathExpression (3)
- XML::LibXML::XPathExpression - interface t...
- XML::LibXML::XPathExpression (3pm)
- XML::LibXML::XPathExpression - interface...
- XML::Parser::Style::Subs (3)
- glue for handling element callbacks
- XML::PatAct::Amsterdam (3)
- An action module for simplistic style-sheets
- XML::PatAct::Amsterdam (3pm)
- An action module for simplistic style-sheets
- XML::PatAct::MatchName (3)
- A pattern module for matching element names
- XML::PatAct::MatchName (3pm)
- A pattern module for matching element names
- XML::Perl2SAX (3)
- - translate Perl SAX methods to Java/CORBA style methods
- XML::Perl2SAX (3pm)
- - translate Perl SAX methods to Java/CORBA style methods
- XML::SAX2Perl (3)
- - translate Java/CORBA style SAX methods to Perl methods
- XML::SAX2Perl (3pm)
- - translate Java/CORBA style SAX methods to Perl methods
- XML::SAX::DocumentLocator (3)
- Helper class for document locators
- XML::SAX::DocumentLocator (3pm)
- Helper class for document locators
- XML::SAX::Intro (3)
- An Introduction to SAX Parsing with Perl
- XML::SAX::Intro (3pm)
- An Introduction to SAX Parsing with Perl
- XML::SAX::PurePerl (3)
- Pure Perl XML Parser with SAX2 interface
- XML::SAX::PurePerl (3pm)
- Pure Perl XML Parser with SAX2 interface
- XML::Twig (3)
- A perl module for processing huge XML documents in tre...
- XML::Twig (3pm)
- A perl module for processing huge XML documents in tre...
- XML::XPath (3)
- Parse and evaluate XPath statements.
- XML::XPath (3pm)
- a set of modules for parsing and evaluating XPath stat...
- XML::XPath::Boolean (3)
- Boolean true/false values
- XML::XPath::Boolean (3pm)
- Boolean true/false values
- XML::XPath::Builder (3)
- SAX handler for building an XPath tree
- XML::XPath::Builder (3pm)
- SAX handler for building an XPath tree
- XML::XPath::Literal (3)
- Simple string values.
- XML::XPath::Literal (3pm)
- Simple string values.
- XML::XPath::Node (3)
- internal representation of a node
- XML::XPath::Node (3pm)
- internal representation of a node
- XML::XPath::NodeSet (3)
- a list of XML document nodes
- XML::XPath::NodeSet (3pm)
- a list of XML document nodes
- XML::XPath::Number (3)
- Simple numeric values.
- XML::XPath::Number (3pm)
- Simple numeric values.
- XML::XPath::PerlSAX (3)
- A PerlSAX event generator for my weird node structure
- XML::XPath::PerlSAX (3pm)
- A PerlSAX event generator for my wierd node struc...
- XML::XPath::XMLParser (3)
- The default XML parsing class that produces a nod...
- XML::XPath::XMLParser (3pm)
- The default XML parsing class that produces a n...
- XML::XPathEngine (3)
- a re-usable XPath engine for DOM-like trees
- XML::XPathEngine (3pm)
- a re-usable XPath engine for DOM-like trees
- XML::XPathEngine::Boolean (3)
- Boolean true/false values
- XML::XPathEngine::Boolean (3pm)
- Boolean true/false values
- XML::XPathEngine::Literal (3)
- Simple string values.
- XML::XPathEngine::Literal (3pm)
- Simple string values.
- XML::XPathEngine::NodeSet (3)
- a list of XML document nodes
- XML::XPathEngine::NodeSet (3pm)
- a list of XML document nodes
- XML::XPathEngine::Number (3)
- Simple numeric values.
- XML::XPathEngine::Number (3pm)
- Simple numeric values.
- XString (3)
- Isolated String helpers from B
- XString (3pm)
- Isolated String helpers from B
- XkbBell (3)
- Rings the bell on the default keyboard
- XpRehashPrinterList (3)
- Recomputes the list of available printers.
- YAML::Marshall (3)
- YAML marshalling class you can mixin to your classes
- YAML::Marshall (3pm)
- YAML marshalling class you can mixin to your classes
- YAML::Node (3)
- A generic data node that encapsulates YAML information
- YAML::Node (3pm)
- A generic data node that encapsulates YAML information
- YAML::Types (3)
- Marshall Perl internal data types to/from YAML
- YAML::Types (3pm)
- Marshall Perl internal data types to/from YAML
- [ (1)
- check file types and compare values
- _Exit (2)
- terminate the calling process
- __after_morecore_hook (3)
- malloc debugging variables
- __ata_change_queue_depth (9)
- helper for ata_scsi_change_queue_depth
- __atomic_add_unless (9)
- add unless the number is already a given value
- __audit_getname (9)
- add a name to the list
- __audit_inode (9)
- store the inode and device from a lookup
- __audit_log_capset (9)
- store information about the arguments to the capset ...
- __audit_reusename (9)
- fill out filename with info from existing entry
- __audit_signal_info (9)
- record signal info for shutting down audit subsystem
- __bio_clone_fast (9)
- clone a bio that shares the original bio's biovec
- __bitmap_parse (9)
- convert an ASCII hex string into a bitmap.
- __bitmap_shift_left (9)
- logical left shift of the bits in a bitmap
- __bitmap_shift_right (9)
- logical right shift of the bits in a bitmap
- __blk_end_bidi_request (9)
- Complete a bidi request with queue lock held
- __blk_end_request (9)
- Helper function for drivers to complete the request.
- __blk_end_request_all (9)
- Helper function for drives to finish the request.
- __blk_end_request_cur (9)
- Helper function to finish the current request chunk.
- __blk_end_request_err (9)
- Finish a request till the next failure boundary.
- __blk_run_queue_uncond (9)
- run a queue whether or not it has been stopped
- __bread (9)
- reads a specified block and returns the bh
- __change_bit (9)
- Toggle a bit in memory
- __check_region (9)
- check if a resource region is busy or free
- __clear_user (9)
- Zero a block of memory in user space, with less checking.
- __clone2 (2)
- create a child process
- __copy_from_user (9)
- Copy a block of data from user space, with less checking.
- __copy_to_user (9)
- Copy a block of data into user space, with less checking.
- __copy_to_user_inatomic (9)
- Copy a block of data into user space, with less...
- __dev_mc_sync (9)
- Synchonize device's multicast list
- __dev_mc_unsync (9)
- Remove synchonized addresses from device
- __dev_remove_pack (9)
- remove packet handler
- __dev_uc_sync (9)
- Synchonize device's unicast list
- __dev_uc_unsync (9)
- Remove synchonized addresses from device
- __flush_tlb_slot (9)
- Flushes TLB slot slot.
- __free_hook (3)
- malloc debugging variables
- __ht_create_irq (9)
- create an irq and attach it to a device.
- __inode_permission (9)
- Check for access rights to a given inode
- __insert_inode_hash (9)
- hash an inode
- __lock_page (9)
- get a lock on the page, assuming we need to sleep to g...
- __malloc_hook (3)
- malloc debugging variables
- __malloc_initialize_hook (3)
- malloc debugging variables
- __memalign_hook (3)
- malloc debugging variables
- __napi_schedule (9)
- schedule for receive
- __pci_hp_register (9)
- register a hotplug_slot with the PCI hotplug subsystem
- __pci_reset_function_locked (9)
- reset a PCI device function while holding t...
- __pmAFblock (3)
- event queue services for periodic asynchronous callbacks
- __pmAFisempty (3)
- event queue services for periodic asynchronous callbacks
- __pmAFregister (3)
- event queue services for periodic asynchronous callbacks
- __pmAFunblock (3)
- event queue services for periodic asynchronous callbacks
- __pmAFunregister (3)
- event queue services for periodic asynchronous callbacks
- __pmFreeHostSpec (3)
- uniform host specification parser
- __pmLocalPMDA (3)
- change the table of DSO PMDAs for PM_CONTEXT_LOCAL con...
- __pmParseHostSpec (3)
- uniform host specification parser
- __pmSpecLocalPMDA (3)
- process command-line argument for the table of DSO PMDAs
- __pskb_copy_fclone (9)
- create copy of an sk_buff with private head.
- __pskb_pull_tail (9)
- advance tail of skb header
- __realloc_hook (3)
- malloc debugging variables
- __register_chrdev (9)
- create and register a cdev occupying a range of minors
- __relay_reset (9)
- reset a channel buffer
- __remove_inode_hash (9)
- remove an inode from the hash
- __scsi_device_lookup (9)
- find a device given the host (UNLOCKED)
- __scsi_device_lookup_by_target (9)
- find a device given the target (UNLOCKED)
- __setfpucw (3)
- set FPU control word on i386 architecture (obsolete)
- __shost_for_each_device (9)
- iterate over all devices of a host (UNLOCKED)
- __sk_mem_schedule (9)
- increase sk_forward_alloc and memory_allocated
- __skb_frag_set_page (9)
- sets the page contained in a paged fragment
- __skb_queue_after (9)
- queue a buffer at the list head
- __skb_queue_head_init (9)
- initialize non-spinlock portions of sk_buff_head
- __snd_rawmidi_transmit_ack (9)
- acknowledge the transmission
- __snd_rawmidi_transmit_peek (9)
- copy data from the internal buffer
- __starget_for_each_device (9)
- helper to walk all devices of a target (UNLOC...
- __unqueue_futex (9)
- Remove the futex_q from its futex_hash_bucket
- __unregister_chrdev (9)
- unregister and destroy a cdev
- __wake_up (9)
- wake up threads blocked on a waitqueue.
- __wake_up_sync_key (9)
- wake up threads blocked on a waitqueue.
- _exit (2)
- terminate the calling process
- _flushlbf (3)
- interfaces to stdio FILE structure
- _nc_free_and_exit (3ncurses)
- curses memory-leak checking
- _nc_freeall (3ncurses)
- curses memory-leak checking
- _syscall (2)
- invoking a system call without library support (OBSOLETE)
- TIFFmemory (3tiff)
- memory management-related functions for use with TIFF ...
- _tolower (3p)
- transliterate uppercase characters to lowercase
- _toupper (3p)
- transliterate lowercase characters to uppercase
- _tracecchar_t (3ncurses)
- curses debugging routines
- _tracecchar_t2 (3ncurses)
- curses debugging routines
- _tracechar (3ncurses)
- curses debugging routines
- _tracechtype (3ncurses)
- curses debugging routines
- _tracechtype2 (3ncurses)
- curses debugging routines
- a2ping (1)
- - convert between PS, EPS and PDF and other page descr...
- a2x (1)
- A toolchain manager for AsciiDoc (converts Asciidoc te...
- aa_change_hat (2)
- change to or from a "hat" within a AppArmor profile
- aa_find_mountpoint (2)
- find where the apparmor interface filesystem is mounted
- ab (1)
- Apache HTTP server benchmarking tool
- abs (3)
- compute the absolute value of an integer
- abs2rel (1)
- convert absolute path to relative path
- absent_pages_in_range (9)
- Return number of page frames in holes within a range
- access (2)
- check user's permissions for a file
- access.conf (5)
- the login access control table file
- accessdb (8)
- dumps the content of a man-db database in a human read...
- acct (2)
- switch process accounting on or off
- acct_process (9)
- now just a wrapper around acct_process_in_ns, which in...
- acl_calc_mask (3)
- calculate the file group class mask
- acl_check (3)
- check an ACL for validity
- acl_entries (3)
- return the number of entries in an ACL
- acl_equiv_mode (3)
- check for an equivalent ACL
- acl_extended_fd (3)
- test for information in the ACL by file descriptor
- acl_get_permset (3)
- retrieve the permission set from an ACL entry
- acl_get_qualifier (3)
- retrieve the qualifier from an ACL entry
- acl_get_tag_type (3)
- get the tag type of an ACL entry
- acl_set_permset (3)
- set the permission set in an ACL entry
- acl_set_qualifier (3)
- set the qualifier of an ACL entry
- acl_set_tag_type (3)
- set the tag type of an ACL entry
- acl_size (3)
- get the size of the external representation of an ACL
- acosh (3)
- inverse hyperbolic cosine function
- acosh (3p)
- inverse hyperbolic cosine functions
- acoshf (3)
- inverse hyperbolic cosine function
- acoshl (3)
- inverse hyperbolic cosine function
- acpi_bus_register_driver (9)
- register a driver with the ACPI bus
- acpi_bus_trim (9)
- Detach scan handlers and drivers from ACPI device obje...
- acpi_bus_unregister_driver (9)
- unregisters a driver with the ACPI bus
- acpi_match_device (9)
- Match a struct device against a given list of ACPI IDs
- active (5)
- List of newsgroups carried by the server
- actsync (8)
- Synchronize newsgroups
- actsyncd (8)
- Synchronize newsgroups
- acyclic (1)
- make directed graph acyclic
- add_key (2)
- add a key to the kernel's key management facility
- add_marker_len (9)
- compute the length of the marker in data area
- add_to_page_cache_locked (9)
- add a locked page to the pagecache
- add_wch (3ncurses)
- add a complex character and rendition to a curses wind...
- add_wchnstr (3ncurses)
- add an array of complex characters (and attributes) ...
- add_wchstr (3ncurses)
- add an array of complex characters (and attributes) t...
- addch (3ncurses)
- add a character (with attributes) to a curses window, ...
- addchnstr (3ncurses)
- add a string of characters (and attributes) to a curse...
- addchstr (3ncurses)
- add a string of characters (and attributes) to a curse...
- addftinfo (1)
- add information to troff font files for use with groff
- addgnupghome (8)
- Create .gnupg home directories
- addnstr (3ncurses)
- add a string of characters to a curses window and adva...
- addnwstr (3ncurses)
- add a string of wide characters to a curses window and...
- addpart (8)
- a simple wrapper around the "add partition" ioctl
- addstr (3ncurses)
- add a string of characters to a curses window and adva...
- addwstr (3ncurses)
- add a string of wide characters to a curses window and...
- adjtime (3)
- correct the time to synchronize the system clock
- adjtimex (8)
- display or set the kernel time variables
- adjust (n)
- Procedures to adjust, indent, and undent paragraphs
- ADMISSION_SYNTAX_get0_admissionAuthority (3osslssl-3)
- Accessors and settors...
- ADMISSION_SYNTAX_set0_admissionAuthority (3osslssl-3)
- Accessors and settors...
- ADMISSIONS_get0_admissionAuthority (3osslssl-3)
- Accessors and settors for A...
- ADMISSIONS_get0_namingAuthority (3osslssl-3)
- Accessors and settors for ADMI...
- ADMISSIONS_set0_admissionAuthority (3osslssl-3)
- Accessors and settors for A...
- ADMISSIONS_set0_namingAuthority (3osslssl-3)
- Accessors and settors for ADMI...
- aes (n)
- Implementation of the AES block cipher
- afmtodit (1)
- create font files for use with groff - Tps and - Tpdf
- afpldaptest (1)
- Syntactically check ldap parameters in afp.conf
- aica_rtc_gettimeofday (9)
- Get the time from the AICA RTC
- aica_rtc_settimeofday (9)
- Set the AICA RTC to the current time
- aio (7)
- POSIX asynchronous I/O overview
- aio.h (0p)
- asynchronous input and output
- aio_cancel (3)
- cancel an outstanding asynchronous I/O request
- aio_cancel (3p)
- cancel an asynchronous I/O request
- aio_error (3)
- get error status of asynchronous I/O operation
- aio_error (3p)
- retrieve errors status for an asynchronous I/O operation
- aio_fsync (3)
- asynchronous file synchronization
- aio_fsync (3p)
- asynchronous file synchronization
- aio_init (3)
- asynchronous I/O initialization
- aio_read (3)
- asynchronous read
- aio_read (3p)
- asynchronous read from a file
- aio_return (3)
- get return status of asynchronous I/O operation
- aio_return (3p)
- retrieve return status of an asynchronous I/O operation
- aio_suspend (3)
- wait for asynchronous I/O operation or timeout
- aio_suspend (3p)
- wait for an asynchronous I/O request
- aio_write (3)
- asynchronous write
- aio_write (3p)
- asynchronous write to a file
- sol (6)
- a collection of card games which are easy to play with...
- alarm (3p)
- schedule an alarm signal
- Alien::Base::Authoring (3)
- Authoring an Alien distribution using Alien::Base
- Alien::Build::Log::Abbreviate (3)
- Log class for Alien::Build which is less ...
- Alien::Build::Manual (3)
- The Alien::Build Manual
- Alien::Build::Manual::Alien (3)
- General alien author documentation
- Alien::Build::Manual::AlienAuthor (3)
- Alien author documentation
- Alien::Build::Manual::PluginAuthor (3)
- Alien::Build plugin author documenta...
- Alien::Build::Manual::Security (3)
- General alien author documentation
- Alien::Build::Plugin::Build::SearchDep (3)
- Add dependencies to library and ...
- Alien::Build::Plugin::Core::Gather (3)
- Core gather plugin
- Alien::Build::Plugin::Decode::HTML (3)
- Plugin to extract links from HTML
- Alien::Build::Plugin::Decode::Mojo (3)
- Plugin to extract links from HTML us...
- Alien::Build::Plugin::Digest (3)
- Fetch Alien::Digest plugins
- Alien::Build::Plugin::Digest::SHA (3)
- Plugin to check SHA digest with Diges...
- Alien::Build::Plugin::Digest::SHAPP (3)
- Plugin to check SHA digest with Dig...
- Alien::Build::Plugin::Extract::Archiv... (3)
- Plugin to extract a tarball us...
- Alien::Build::Plugin::Extract::Archiv... (3)
- Plugin to extract a tarball us...
- Alien::Build::Plugin::Extract::Comman... (3)
- Plugin to extract an archive u...
- Alien::Build::Plugin::Fetch (3)
- Fetch Alien::Build plugins
- Alien::Build::Plugin::Fetch::CurlCommand (3)
- Plugin for fetching files usin...
- Alien::Build::Plugin::Fetch::HTTPTiny (3)
- Plugin for fetching files using H...
- Alien::Build::Plugin::Fetch::Local (3)
- Plugin for fetching a local file
- Alien::Build::Plugin::Fetch::LocalDir (3)
- Plugin for fetching a local direc...
- Alien::Build::Plugin::Fetch::LWP (3)
- Plugin for fetching files using LWP
- Alien::Build::Plugin::Fetch::NetFTP (3)
- Plugin for fetching files using Net...
- Alien::Build::Plugin::Fetch::Wget (3)
- Plugin for fetching files using wget
- Alien::Build::Plugin::Gather (3)
- Gather Alien::Build plugins
- Alien::Build::Plugin::Gather::Isolate... (3)
- Plugin to gather dynamic libra...
- Alien::Libxml2 (3)
- Install the C libxml2 library on your system
- Alien::Role (3)
- Extend Alien::Base with roles!
- align_image_stack (1)
- Align overlapping images for HDR or focus stack creation
- allcm (1)
- force the most important Computer-Modern-fonts to be c...
- allec (1)
- force the most important ec-fonts to be calculated
- allneeded (1)
- force the calculation of all fonts now needed
- alloc_chrdev_region (9)
- register a range of char device numbers
- alloc_etherdev_mqs (9)
- Allocates and sets up an Ethernet device
- alloc_hugepages (2)
- allocate or free huge pages
- alloca (3)
- allocate memory that is automatically freed
- allocate_resource (9)
- allocate empty slot in the resource tree given range ...
- alphasort (3)
- scan a directory for matching entries
- alphasort (3p)
- scan a directory
- alsaconf (8)
- configuration tool for the Advanced Linux Sound Archit...
- alsamixer (1)
- soundcard mixer for ALSA soundcard driver, with ncurse...
- ALTER_AGGREGATE (7pg161)
- change the definition of an aggregate function
- ALTER_COLLATION (7pg161)
- change the definition of a collation
- ALTER_CONVERSION (7pg161)
- change the definition of a conversion
- ALTER_DATABASE (7pg161)
- change a database
- ALTER_DOMAIN (7pg161)
- change the definition of a domain
- ALTER_EVENT_TRIGGER (7pg161)
- change the definition of an event trigger
- ALTER_EXTENSION (7pg161)
- change the definition of an extension
- ALTER_FOREIGN_DATA_WRAPPER (7pg161)
- change the definition of a foreign-data...
- ALTER_FOREIGN_TABLE (7pg161)
- change the definition of a foreign table
- ALTER_FUNCTION (7pg161)
- change the definition of a function
- ALTER_GROUP (7pg161)
- change role name or membership
- ALTER_INDEX (7pg161)
- change the definition of an index
- ALTER_LANGUAGE (7pg161)
- change the definition of a procedural language
- ALTER_LARGE_OBJECT (7pg161)
- change the definition of a large object
- ALTER_MATERIALIZED_VIEW (7pg161)
- change the definition of a materialized view
- ALTER_OPERATOR (7pg161)
- change the definition of an operator
- ALTER_OPERATOR_CLASS (7pg161)
- change the definition of an operator class
- ALTER_OPERATOR_FAMILY (7pg161)
- change the definition of an operator family
- ALTER_POLICY (7pg161)
- change the definition of a row-level security policy
- ALTER_PROCEDURE (7pg161)
- change the definition of a procedure
- ALTER_PUBLICATION (7pg161)
- change the definition of a publication
- ALTER_ROLE (7pg161)
- change a database role
- ALTER_ROUTINE (7pg161)
- change the definition of a routine
- ALTER_RULE (7pg161)
- change the definition of a rule
- ALTER_SCHEMA (7pg161)
- change the definition of a schema
- ALTER_SEQUENCE (7pg161)
- change the definition of a sequence generator
- ALTER_SERVER (7pg161)
- change the definition of a foreign server
- ALTER_STATISTICS (7pg161)
- change the definition of an extended statistics o...
- ALTER_SUBSCRIPTION (7pg161)
- change the definition of a subscription
- ALTER_SYSTEM (7pg161)
- change a server configuration parameter
- ALTER_TABLE (7pg161)
- change the definition of a table
- ALTER_TABLESPACE (7pg161)
- change the definition of a tablespace
- ALTER_TEXT_SEARCH_CONFIGURATION (7pg161)
- change the definition of a text se...
- ALTER_TEXT_SEARCH_DICTIONARY (7pg161)
- change the definition of a text searc...
- ALTER_TEXT_SEARCH_PARSER (7pg161)
- change the definition of a text search pa...
- ALTER_TEXT_SEARCH_TEMPLATE (7pg161)
- change the definition of a text search ...
- ALTER_TRIGGER (7pg161)
- change the definition of a trigger
- ALTER_TYPE (7pg161)
- change the definition of a type
- ALTER_USER (7pg161)
- change a database role
- ALTER_USER_MAPPING (7pg161)
- change the definition of a user mapping
- ALTER_VIEW (7pg161)
- change the definition of a view
- anemotaxis (6x)
- directional search on a plane.
- anjuta-launcher (1)
- GNOME Integrated Development Environment
- ansi_code (n)
- Helper for control sequences
- antinspect (6x)
- ant model inspection screenhack
- antspotlight (6x)
- ant spotlight screenhack
- aoss (1)
- Wrapper script to facilitate use of the ALSA OSS compa...
- Apache::RPC::Server (3pm)
- A subclass of RPC::XML::Server tuned for mod_perl
- Apache::RPC::Status (3pm)
- A status monitor similar to Apache::Status for RPC
- apachectl (8)
- Apache HTTP Server Control Interface
- apachectl2 (8)
- Apache HTTP Server Control Interface
- apollonian (6x)
- Descartes Circle Theorem.
- apparmor.vim (5)
- vim syntax highlighting file for AppArmor profiles
- apparmor_parser (8)
- loads AppArmor profiles into the kernel
- appletviewer-java-1.7.0-openjdk (1)
- The Java Applet Viewer.
- applydeltaiso (8)
- reconstruct an iso from the old iso and the deltaiso
- apropos (1)
- search the manual page names and descriptions
- apxs (1)
- APache eXtenSion tool
- apxs2 (1)
- APache eXtenSion tool
- ar (1)
- create, modify, and extract from archives
- ar (1p)
- create and maintain library archives
- arch (1)
- print machine hardware name (same as uname -m)
- arch_phys_wc_add (9)
- add a WC MTRR and handle errors if PAT is unavailable
- arch_prctl (2)
- set architecture-specific thread state
- Archetype (n)
- base class for all [incr Tk] mega-widgets
- archive (8)
- Usenet article archiver
- archive_util (3)
- libarchive utility functions
- archive_entry (3)
- functions for managing archive entry descriptions
- archive_entry_acl (3)
- functions for manipulating Access Control Lists in ar...
- archive_entry_time (3)
- functions for manipulating times in archive entry de...
- archive_entry_perms (3)
- functions for manipulating ownership and permission...
- archive_entry_paths (3)
- functions for manipulating path names in archive en...
- archive_entry_stat (3)
- accessor functions for manipulating archive entry de...
- archive_entry_linkify (3)
- hardlink resolver functions
- archive_entry_misc (3)
- miscellaneous functions for manipulating properties ...
- archive_read (3)
- functions for reading streaming archives
- archive_read_add_passphrase (3)
- functions for reading encrypted archives
- archive_read_free (3)
- functions for reading streaming archives
- archive_read_data (3)
- functions for reading streaming archives
- archive_read_disk (3)
- functions for reading objects from disk
- archive_read_extract (3)
- functions for reading streaming archives
- archive_read_filter (3)
- functions for reading streaming archives
- archive_read_format (3)
- functions for reading streaming archives
- archive_read_header (3)
- functions for reading streaming archives
- archive_read_new (3)
- functions for reading streaming archives
- archive_read_open (3)
- functions for reading streaming archives
- archive_read_set_options (3)
- functions controlling options for reading arch...
- archive_write (3)
- functions for creating archives
- archive_write_filter (3)
- functions enabling output filters
- archive_write_blocksize (3)
- functions for creating archives
- archive_write_free (3)
- functions for creating archives
- archive_write_data (3)
- functions for creating archives
- archive_write_disk (3)
- functions for creating objects on disk
- archive_write_finish_entry (3)
- functions for creating archives
- archive_write_format (3)
- functions for creating archives
- archive_write_header (3)
- functions for creating archives
- archive_write_new (3)
- functions for creating archives
- archive_write_open (3)
- functions for creating archives
- archive_write_set_options (3)
- functions controlling options for writing arc...
- archive_write_set_passphrase (3)
- functions for writing encrypted archives
- ares_destroy (3)
- Destroy a resolver channel
- ares_destroy_options (3)
- Destroy options initialized with ares_save_options
- ares_dup (3)
- Duplicate a resolver channel
- ares_expand_string (3)
- Expand a length encoded string
- ares_free_hostent (3)
- Free host structure allocated by ares functions
- ares_get_servers (3)
- Retrieve name servers from an initialized ares_channel
- ares_getaddrinfo (3)
- Initiate a host query by name and service
- ares_gethostbyaddr (3)
- Initiate a host query by address
- ares_gethostbyname (3)
- Initiate a host query by name
- ares_gethostbyname_file (3)
- Lookup a name in the system's hosts file
- ares_init (3)
- Initialize a resolver channel
- ares_init_options (3)
- Initialize a resolver channel
- ares_library_initialized (3)
- get the initialization state
- ares_parse_ns_reply (3)
- Parse a reply to a DNS query of type NS into a hostent
- ares_parse_ptr_reply (3)
- Parse a reply to a DNS query of type PTR into a ho...
- ares_search (3)
- Initiate a DNS query with domain search
- ares_set_local_dev (3)
- Bind to a specific network device when creating sock...
- ares_set_servers (3)
- Initialize an ares_channel name servers configuration
- ares_set_servers_ports (3)
- Initialize an ares_channel name servers configur...
- ares_set_sortlist (3)
- Initialize an ares_channel sortlist configuration
- ares_strerror (3)
- Get the description of an ares library error code
- ares_version (3)
- Get the version number of the library
- argz (3)
- functions to handle an argz list
- argz_add (3)
- functions to handle an argz list
- argz_add_sep (3)
- functions to handle an argz list
- argz_append (3)
- functions to handle an argz list
- argz_count (3)
- functions to handle an argz list
- argz_create (3)
- functions to handle an argz list
- argz_create_sep (3)
- functions to handle an argz list
- argz_delete (3)
- functions to handle an argz list
- argz_extract (3)
- functions to handle an argz list
- argz_insert (3)
- functions to handle an argz list
- argz_next (3)
- functions to handle an argz list
- argz_replace (3)
- functions to handle an argz list
- argz_stringify (3)
- functions to handle an argz list
- aria_chk (1)
- Aria table-maintenance utility
- arithmetic (6)
- quiz on simple arithmetic
- ark (1)
- KDE archiving tool
- arlatex (1)
- archive a number of ancillary LaTeX files into a maste...
- arm_sync_file_range (2)
- sync a file segment with disk
- armscii-8 (7)
- Armenian character set encoded in octal, decimal, and ...
- arp (8)
- manipulate the system ARP cache
- arpa_inet.h (0p)
- definitions for internet operations
- arpaname (1)
- translate IP addresses to the corresponding ARPA names
- arping (8)
- send ARP REQUEST to a neighbour host
- arpsnmp (8)
- keep track of ethernet/ip address pairings
- arpwatch (8)
- keep track of ethernet/ip address pairings
- asa (1ast)
- interpret carriage-control characters
- asa (1p)
- interpret carriage-control characters
- ascii (7)
- ASCII character set encoded in octal, decimal, and hex...
- ascii-xfr (1)
- upload/download files using the ASCII protocol
- asciidoc (1)
- converts an AsciiDoc text file to HTML or DocBook
- asciitopgm (1)
- convert ASCII graphics into a PGM
- aseqdump (1)
- show the events received at an ALSA sequencer port
- ASIdentifierChoice_free (3osslssl-3)
- ASN1 object utilities
- ASIdentifierChoice_new (3osslssl-3)
- ASN1 object utilities
- asinh (3)
- inverse hyperbolic sine function
- asinh (3p)
- inverse hyperbolic sine functions
- asinhf (3)
- inverse hyperbolic sine function
- asinhl (3)
- inverse hyperbolic sine function
- asip-status.pl (1)
- Queries AFP servers for their capabilities
- asn1_check_version (3)
- API function
- ASN1_GENERALIZEDTIME_check (3osslssl-3)
- ASN.1 Time functions
- asn1_get_length_ber (3)
- API function
- asn1_get_length_der (3)
- API function
- asn1_length_der (3)
- API function
- ASN1_STRING_length (3osslssl-3)
- ASN1_STRING utility functions
- ASN1_TIME_check (3osslssl-3)
- ASN.1 Time functions
- ASN1_UTCTIME_check (3osslssl-3)
- ASN.1 Time functions
- aspell (1)
- interactive spell checker
- assert (3)
- abort the program if assertion is false
- assert.h (0p)
- verify program assertion
- asy (1)
- Asymptote: a script-based vector graphics language
- async (n)
- Asynchronous in-memory cache
- ASYNC_block_pause (3osslssl-3)
- asynchronous job management functions
- ASYNC_callback_fn (3osslssl-3)
- functions to manage waiting for asynchronous...
- ASYNC_cleanup_thread (3osslssl-3)
- asynchronous job management functions
- ASYNC_get_current_job (3osslssl-3)
- asynchronous job management functions
- ASYNC_get_wait_ctx (3osslssl-3)
- asynchronous job management functions
- ASYNC_init_thread (3osslssl-3)
- asynchronous job management functions
- ASYNC_is_capable (3osslssl-3)
- asynchronous job management functions
- ASYNC_pause_job (3osslssl-3)
- asynchronous job management functions
- ASYNC_start_job (3osslssl-3)
- asynchronous job management functions
- ASYNC_STATUS_EAGAIN (3osslssl-3)
- functions to manage waiting for asynchrono...
- ASYNC_STATUS_ERR (3osslssl-3)
- functions to manage waiting for asynchronous ...
- ASYNC_STATUS_OK (3osslssl-3)
- functions to manage waiting for asynchronous j...
- ASYNC_unblock_pause (3osslssl-3)
- asynchronous job management functions
- ASYNC_WAIT_CTX_clear_fd (3osslssl-3)
- functions to manage waiting for asynch...
- ASYNC_WAIT_CTX_free (3osslssl-3)
- functions to manage waiting for asynchrono...
- ASYNC_WAIT_CTX_get_changed_fds (3osslssl-3)
- functions to manage waiting for...
- ASYNC_WAIT_CTX_get_fd (3osslssl-3)
- functions to manage waiting for asynchro...
- ASYNC_WAIT_CTX_new (3osslssl-3)
- functions to manage waiting for asynchronou...
- at.allow (5)
- determine who can submit jobs via at or batch
- at.deny (5)
- determine who can submit jobs via at or batch
- ata_cmd_ioctl (9)
- Handler for HDIO_DRIVE_CMD ioctl
- ata_dev_configure (9)
- Configure the specified ATA/ATAPI device
- ata_dev_next (9)
- device iteration helper
- ata_dev_pair (9)
- return other device on cable
- ata_dev_phys_link (9)
- find physical link for a device
- ata_dev_read_id (9)
- Read ID data from the specified device
- ata_dev_same_device (9)
- Determine whether new ID matches configured device
- ata_dev_xfermask (9)
- Compute supported xfermask of the given device
- ata_do_dev_read_id (9)
- default ID read method
- ata_force_horkage (9)
- force horkage according to libata.force
- ata_get_identity (9)
- Handler for HDIO_GET_IDENTITY ioctl
- ata_get_xlat_func (9)
- check if SCSI to ATA translation is possible
- ata_host_activate (9)
- start host, request IRQ and register it
- ata_host_alloc (9)
- allocate and init basic ATA host resources
- ata_host_alloc_pinfo (9)
- alloc host and init with port_info array
- ata_host_detach (9)
- Detach all ports of an ATA host
- ata_host_init (9)
- Initialize a host struct for sas (ipr, libsas)
- ata_host_register (9)
- register initialized ATA host
- ata_host_resume (9)
- resume host
- ata_host_start (9)
- start and freeze ports of an ATA host
- ata_host_suspend (9)
- suspend host
- ata_hpa_resize (9)
- Resize a device with an HPA set
- ata_id_xfermask (9)
- Compute xfermask from the given IDENTIFY data
- ata_is_40wire (9)
- check drive side detection
- ata_link_next (9)
- link iteration helper
- ata_link_offline (9)
- test whether the given link is offline
- ata_link_online (9)
- test whether the given link is online
- ata_mselect_caching (9)
- Simulate MODE SELECT for caching info page
- ata_msense_caching (9)
- Simulate MODE SENSE caching info page
- ata_msleep (9)
- ATA EH owner aware msleep
- ata_phys_link_offline (9)
- test whether the given link is offline
- ata_phys_link_online (9)
- test whether the given link is online
- ata_pio_mask_no_iordy (9)
- Return the non IORDY mask
- ata_pio_need_iordy (9)
- check if iordy needed
- ata_port_detach (9)
- Detach ATA port in prepration of device removal
- ata_sas_async_probe (9)
- simply schedule probing and return
- ata_sas_port_alloc (9)
- Allocate port for a SAS attached SATA device
- ata_scsi_change_queue_depth (9)
- SCSI callback for queue depth config
- ata_scsi_flush_xlat (9)
- Translate SCSI SYNCHRONIZE CACHE command
- ata_scsi_hotplug (9)
- SCSI part of hotplug
- ata_scsi_media_change_notify (9)
- send media change event
- ata_scsi_offline_dev (9)
- offline attached SCSI device
- ata_scsi_pass_thru (9)
- convert ATA pass-thru CDB to taskfile
- ata_scsi_remove_dev (9)
- remove attached SCSI device
- ata_scsi_translate (9)
- Translate then issue SCSI command to ATA device
- ata_scsiop_noop (9)
- Command handler that simply returns success.
- ata_sg_clean (9)
- Unmap DMA memory associated with command
- ata_sg_init (9)
- Associate command with scatter-gather table.
- ata_sg_setup (9)
- DMA-map the scatter-gather table associated with a com...
- ata_std_bios_param (9)
- generic bios head/sector/cylinder calculator used by...
- ata_std_qc_defer (9)
- Check whether a qc needs to be deferred
- ata_task_ioctl (9)
- Handler for HDIO_DRIVE_TASK ioctl
- ata_timing_cycle2mode (9)
- find xfer mode for the specified cycle duration
- ata_wait_register (9)
- wait until register value changes
- ata_xfer_mask2mode (9)
- Find matching XFER_* for the given xfer_mask
- ata_xfer_mode2mask (9)
- Find matching xfer_mask for XFER_*
- ata_xfer_mode2shift (9)
- Find matching xfer_shift for XFER_*
- atanh (3)
- inverse hyperbolic tangent function
- atanh (3p)
- inverse hyperbolic tangent functions
- atanhf (3)
- inverse hyperbolic tangent function
- atanhl (3)
- inverse hyperbolic tangent function
- atapi_check_dma (9)
- Check whether ATAPI DMA can be supported
- atapi_drain_needed (9)
- Check whether data transfer may overflow
- atlantis (6x)
- draw swimming sharks, whales, and dolphins.
- atobm (1)
- bitmap editor and converter utilities for the X Window...
- atomic_dec_and_mutex_lock (9)
- return holding mutex if we dec to 0
- atomic_inc_short (9)
- increment of a short integer
- attemptckalloc (3)
- allocate or free heap memory
- attemptckrealloc (3)
- allocate or free heap memory
- attr (3ncurses)
- curses character and window attribute control routines
- attr_get (3)
- get the value of a user attribute of a filesystem object
- attr_get (3ncurses)
- curses character and window attribute control routines
- attr_getf (3)
- get the value of a user attribute of a filesystem object
- attr_list (3)
- list the names of the user attributes of a filesystem ...
- attr_list_by_handle (3)
- file handle operations
- attr_listf (3)
- list the names of the user attributes of a filesystem ...
- attr_multi_by_handle (3)
- file handle operations
- attr_off (3ncurses)
- curses character and window attribute control routines
- attr_on (3ncurses)
- curses character and window attribute control routines
- attr_set (3)
- set the value of a user attribute of a filesystem object
- attr_set (3ncurses)
- curses character and window attribute control routines
- attr_setf (3)
- set the value of a user attribute of a filesystem object
- Attribute::Handlers (3)
- Simpler definition of attribute handlers
- attroff (3ncurses)
- curses character and window attribute control routines
- attron (3ncurses)
- curses character and window attribute control routines
- attrset (3ncurses)
- curses character and window attribute control routines
- atunnel (6x)
- hypnotic GL tunnel journey
- audacity (1)
- Graphical cross-platform audio editor
- audispd.conf (5)
- the audit event dispatcher configuration file
- audit.rules (7)
- a set of rules loaded in the kernel audit system
- audit_add_watch (3)
- create a rule layout for a watch
- audit_compare_dname_path (9)
- compare given dentry name with last component ...
- audit_core_dumps (9)
- record information about processes that end abnormally
- audit_detect_machine (3)
- Detects the current machine type
- audit_get_reply (3)
- Get the audit system's reply
- audit_list_rules_send (9)
- list the audit rules
- audit_log_format (9)
- format a message into the audit buffer.
- audit_request_signal_info (3)
- Request signal info for the audit system
- audit_request_status (3)
- Request status of the audit system
- audit_rule_change (9)
- apply all rules to the specified message type
- audit_set_backlog_limit (3)
- Set the audit backlog limit
- audit_update_watch_perms (3)
- update permissions field of watch command
- auditctl (8)
- a utility to assist controlling the kernel's audit system
- auditd (8)
- The Linux Audit daemon
- auparse_add_callback (3)
- add a callback handler for notifications
- auparse_feed_has_data (3)
- check if there is any data accumulating that migh...
- auparse_find_field (3)
- search for field name
- auparse_flush_feed (3)
- flush any unconsumed feed data through parser.
- auparse_get_filename (3)
- get the filename where record was found
- auparse_get_line_number (3)
- get line number where record was found
- auparse_get_milli (3)
- get the millisecond value of the event
- auparse_get_node (3)
- get the event's machine node name
- auparse_get_num_fields (3)
- get the number of fields
- auparse_get_num_records (3)
- get the number of records
- auparse_get_serial (3)
- get the event's serial number
- auparse_get_timestamp (3)
- access timestamp of the event
- auparse_init (3)
- initialize an instance of the audit parsing library
- auparse_next_event (3)
- get the next event
- aureport (8)
- a tool that produces summary reports of audit daemon logs
- ausearch (8)
- a tool to query audit daemon logs
- ausearch-expression (5)
- audit search expression format
- ausearch_add_expression (3)
- build up search expression
- ausearch_add_interpreted_item (3)
- build up search rule
- ausearch_add_item (3)
- build up search rule
- ausearch_add_regex (3)
- use regular expression search rule
- ausearch_add_timestamp_item (3)
- build up search rule
- ausearch_clear (3)
- clear search parameters
- ausearch_next_event (3)
- find the next event that meets search criteria
- ausearch_set_stop (3)
- set the cursor position
- ausyscall (8)
- a program that allows mapping syscall names and numbers
- auth_destroy (3)
- library routines for remote procedure calls
- authnone_create (3)
- library routines for remote procedure calls
- AUTHORITY_INFO_ACCESS_free (3osslssl-3)
- ASN1 object utilities
- AUTHORITY_INFO_ACCESS_new (3osslssl-3)
- ASN1 object utilities
- AUTHORITY_KEYID_free (3osslssl-3)
- ASN1 object utilities
- AUTHORITY_KEYID_new (3osslssl-3)
- ASN1 object utilities
- rpc_clnt_auth (3t)
- library routines for client side remote procedure call...
- authunix_create (3)
- library routines for remote procedure calls
- authunix_create_default (3)
- library routines for remote procedure calls
- auto_path (n)
- Variables used by Tcl
- autodie (3)
- Replace functions with ones that succeed or die with l...
- autodie::hints (3)
- Provide hints about user subroutines to autodie
- autodie::Scope::GuardStack (3)
- Hook stack for managing scopes via %^H
- autodie::skip (3)
- Skip a package when throwing autodie exceptions
- autoexpect (1)
- generate an Expect script from watching a session
- autofs (5)
- Format of the automounter maps
- autofs_ldap_auth.conf (5)
- autofs LDAP authentication configuration
- autogen (1)
- The Automated Program Generator
- autoheader (1)
- Create a template header for configure
- autoinst (1)
- wrapper around the LCDF TypeTools, for installing Open...
- autom4te (1)
- Generate files and scripts thanks to M4
- autopano-noop.sh (1)
- Trivial wrapper script for autopano-sift-c
- autoproxy (n)
- Automatic HTTP proxy usage and authentication
- auvirt (8)
- a program that shows data related to virtual machines
- avahi-autoipd (8)
- IPv4LL network address configuration daemon
- avahi-autoipd.action (8)
- avahi-autoipd action script
- avahi-daemon (8)
- The Avahi mDNS/DNS-SD daemon
- avahi-daemon.conf (5)
- avahi-daemon configuration file
- avahi-dnsconfd (8)
- Unicast DNS server from mDNS/DNS-SD configuration daemon
- avahi-dnsconfd.action (8)
- avahi-dnsconfd action script
- avahi.hosts (5)
- avahi-daemon static host name file
- avahi.service (5)
- avahi-daemon static service file
- avc_cache_stats (3)
- obtain userspace SELinux AVC statistics
- avc_has_perm (3)
- obtain and audit SELinux access decisions
- avc_has_perm_noaudit (3)
- obtain and audit SELinux access decisions
- avc_netlink_check_nb (3)
- SELinux netlink processing
- aycock (n)
- Aycock-Horspool-Earley parser generator for Tcl
- B (3)
- The Perl Compiler Backend
- b2sum (1)
- compute and check BLAKE2 message digest
- B::COW (3)
- B::COW additional B helpers to check COW status
- B::Showlex (3)
- Show lexical variables used in functions or files
- babel (1)
- "a converter for chemistry and molecular modeling data...
- backgammon (6)
- the game of backgammon
- badblocks (8)
- search a device for bad blocks
- barcode (6x)
- draws a random sequence of barcodes for the products y...
- bareword::filehandles (3)
- disables bareword filehandles
- bareword::filehandles (3pm)
- disables bareword filehandles
- base (3)
- Establish an ISA relationship with base classes at com...
- base32hex (n)
- base32 extended hex encoding
- basename (1p)
- return non-directory portion of a pathname
- basename (3)
- parse pathname components
- basename (3p)
- return the last component of a pathname
- bash (1)
- GNU Bourne-Again SHell
- bashbug (1)
- report a bug in bash
- basic_db_auth (8)
- Database auth helper for Squid
- basic_getpwnam_auth (8)
- Local Users auth helper for Squid
- basic_ldap_auth (8)
- LDAP authentication helper for Squid
- basic_ncsa_auth (8)
- NCSA httpd-style password file authentication helper f...
- basic_pam_auth (8)
- PAM Basic authentication helper for Squid
- basic_pop3_auth (8)
- POP3 authenticator for Squid
- basic_radius_auth (8)
- Squid RADIUS authentication helper
- basic_sasl_auth (8)
- Basic Authentication using SASL (specifically the cyru...
- batch (1)
- queue, examine or delete jobs for later execution
- batch (1p)
- schedule commands to be executed in a batch queue
- batcher (8)
- Article batching for InterNetNews
- bbox (1)
- prints out the bounding box of a rawppm or rawpbm image
- bc (1p)
- arbitrary-precision arithmetic language
- bccmd (1)
- Utility for the CSR BCCMD interface
- bcd (6)
- "reformat input as punch cards, paper tape or morse code"
- bcomps (1)
- biconnected components filter for graphs
- bd_link_disk_holder (9)
- create symlinks between holding disk and slave bdev
- bd_unlink_disk_holder (9)
- destroy symlinks created by bd_link_disk_holder
- bdflush (2)
- start, flush, or tune buffer-dirty-flush daemon
- be16toh (3)
- convert values between host and big-/little-endian byt...
- be32toh (3)
- convert values between host and big-/little-endian byt...
- be64toh (3)
- convert values between host and big-/little-endian byt...
- beep (3ncurses)
- curses bell and screen flash routines
- beforelight (1)
- screen saver
- urxvt-bell-command-256color (1)
- execute a command when the bell rings
- Benchmark (3)
- benchmark running times of Perl code
- ber_flush (3)
- OpenLDAP LBER simplified Basic Encoding Rules library ...
- BF_cbc_encrypt (3osslssl-3)
- Blowfish encryption
- BF_cfb64_encrypt (3osslssl-3)
- Blowfish encryption
- bf_compact (1)
- shell script to compact a bogofilter directory
- bf_copy (1)
- shell script to copy a bogofilter working directory
- BF_decrypt (3osslssl-3)
- Blowfish encryption
- BF_ecb_encrypt (3osslssl-3)
- Blowfish encryption
- BF_encrypt (3osslssl-3)
- Blowfish encryption
- BF_ofb64_encrypt (3osslssl-3)
- Blowfish encryption
- BF_options (3osslssl-3)
- Blowfish encryption
- BF_set_key (3osslssl-3)
- Blowfish encryption
- bf_tar (1)
- shell script to write a tar file of a bogofilter direc...
- bg (1p)
- run jobs in the background
- bgpd (8)
- a BGPv4, BGPv4+, BGPv4 - routing engine for use with Q...
- bh_submit_read (9)
- Submit a locked buffer for reading
- bh_uptodate_or_lock (9)
- Test whether the buffer is uptodate
- bibtex (1)
- make a bibliography for (La)TeX
- bindtags (n)
- Determine which bindings apply to a window, and order ...
- binhex.pl (1)
- use Convert::BinHex to encode files as BinHex
- BIO_ADDR_hostname_string (3osslssl-3)
- BIO_ADDR routines
- BIO_ADDR_path_string (3osslssl-3)
- BIO_ADDR routines
- bio_alloc_pages (9)
- allocates a single page for each bvec in a bio
- bio_chain (9)
- chain bio completions
- bio_clone_fast (9)
- clone a bio that shares the original bio's biovec
- bio_copy_data (9)
- copy contents of data buffers from one chain of bios t...
- BIO_ctrl_dgram_connect (3osslssl-3)
- Network BIO with datagram semantics
- BIO_ctrl_set_connected (3osslssl-3)
- Network BIO with datagram semantics
- BIO_dgram_get_mtu_overhead (3osslssl-3)
- Network BIO with datagram semantics
- BIO_dgram_get_peer (3osslssl-3)
- Network BIO with datagram semantics
- BIO_dgram_recv_timedout (3osslssl-3)
- Network BIO with datagram semantics
- BIO_dgram_send_timedout (3osslssl-3)
- Network BIO with datagram semantics
- BIO_dgram_set_peer (3osslssl-3)
- Network BIO with datagram semantics
- BIO_do_handshake (3osslssl-3)
- SSL BIO
- bio_endio_nodec (9)
- end I/O on a bio, without decrementing bi_remaining
- BIO_f_cipher (3osslssl-3)
- cipher BIO filter
- BIO_f_readbuffer (3osslssl-3)
- read only buffering BIO that supports BIO_tel...
- BIO_find_type (3osslssl-3)
- BIO chain traversal
- BIO_flush (3osslssl-3)
- BIO control operations
- BIO_get_cipher_ctx (3osslssl-3)
- cipher BIO filter
- BIO_get_cipher_status (3osslssl-3)
- cipher BIO filter
- BIO_get_conn_hostname (3osslssl-3)
- connect BIO
- BIO_get_new_index (3osslssl-3)
- Routines to build up BIO methods
- BIO_get_shutdown (3osslssl-3)
- functions for managing BIO state information
- BIO_hostserv_priorities (3osslssl-3)
- utility routines to parse a standard h...
- BIO_meth_free (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_callback_ctrl (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_create (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_ctrl (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_destroy (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_gets (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_puts (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_read (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_read_ex (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_write (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_get_write_ex (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_new (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_callback_ctrl (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_create (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_ctrl (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_destroy (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_gets (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_puts (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_read (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_read_ex (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_write (3osslssl-3)
- Routines to build up BIO methods
- BIO_meth_set_write_ex (3osslssl-3)
- Routines to build up BIO methods
- BIO_method_type (3osslssl-3)
- BIO chain traversal
- BIO_new_dgram (3osslssl-3)
- Network BIO with datagram semantics
- BIO_next (3osslssl-3)
- BIO chain traversal
- BIO_parse_hostserv (3osslssl-3)
- utility routines to parse a standard host a...
- BIO_pop (3osslssl-3)
- add and remove BIOs from a chain
- BIO_push (3osslssl-3)
- add and remove BIOs from a chain
- BIO_s_datagram (3osslssl-3)
- Network BIO with datagram semantics
- BIO_set_cipher (3osslssl-3)
- cipher BIO filter
- BIO_set_conn_hostname (3osslssl-3)
- connect BIO
- BIO_set_next (3osslssl-3)
- add and remove BIOs from a chain
- BIO_set_shutdown (3osslssl-3)
- functions for managing BIO state information
- BIO_should_io_special (3osslssl-3)
- BIO retry functions
- BIO_should_read (3osslssl-3)
- BIO retry functions
- BIO_should_retry (3osslssl-3)
- BIO retry functions
- BIO_should_write (3osslssl-3)
- BIO retry functions
- BIO_shutdown_wr (3osslssl-3)
- BIO pair BIO
- BIO_ssl_shutdown (3osslssl-3)
- SSL BIO
- bio_uncopy_user (9)
- finish previously mapped bio
- bitmap (1)
- bitmap editor and converter utilities for the X Window...
- bitmap (n)
- Images that display two colors
- bitmap_copy_le (9)
- copy a bitmap, putting the bits into little-endian order.
- bitmap_onto (9)
- translate one bitmap relative to another
- bitmap_ord_to_pos (9)
- find position of n-th set bit in bitmap
- bitmap_parse_user (9)
- convert an ASCII hex string in a user buffer into a b...
- bitmap_remap (9)
- Apply map defined by a pair of bitmaps to another bitmap
- bitmap_scnprintf (9)
- convert bitmap to an ASCII hex string.
- blinkbox (6x)
- shows a ball inside a box.
- blk_attempt_plug_merge (9)
- try to merge with current's plugged list
- blk_cleanup_queue (9)
- shutdown a request queue
- blk_end_request (9)
- Helper function for drivers to complete the request.
- blk_end_request_all (9)
- Helper function for drives to finish the request.
- blk_end_request_cur (9)
- Helper function to finish the current request chunk.
- blk_end_request_err (9)
- Finish a request till the next failure boundary.
- blk_fetch_request (9)
- fetch a request from a request queue
- blk_get_backing_dev_info (9)
- get the address of a queue's backing_dev_info
- blk_init_queue (9)
- prepare a request queue for use with a block device
- blk_init_tags (9)
- initialize the tag info for an external tag map
- blk_insert_cloned_request (9)
- Helper for stacking drivers to submit a request
- blk_limits_max_hw_sectors (9)
- set hard and soft limit of max sectors for re...
- blk_lld_busy (9)
- Check if underlying low-level drivers of a device are ...
- blk_peek_request (9)
- peek at the top of a request queue
- blk_pre_runtime_suspend (9)
- Pre runtime suspend check
- blk_queue_alignment_offset (9)
- set physical block alignment offset
- blk_queue_chunk_sectors (9)
- set size of the chunk for this queue
- blk_queue_dma_alignment (9)
- set dma length and memory alignment
- blk_queue_flush (9)
- configure queue's cache flush capability
- blk_queue_init_tags (9)
- initialize the queue tag info
- blk_queue_io_min (9)
- set minimum request size for the queue
- blk_queue_io_opt (9)
- set optimal request size for the queue
- blk_queue_logical_block_size (9)
- set logical block size for the queue
- blk_queue_max_hw_sectors (9)
- set max sectors for a request for this queue
- blk_queue_max_segments (9)
- set max hw segments for a request for this queue
- blk_queue_physical_block_size (9)
- set physical block size for the queue
- blk_queue_resize_tags (9)
- change the queueing depth
- blk_queue_stack_limits (9)
- inherit underlying queue limits for stacked drivers
- blk_queue_update_dma_alignment (9)
- update dma length and memory alignment
- blk_release_queue (9)
- release a struct request_queue when it is no longer n...
- blk_rq_check_limits (9)
- Helper function to check a request for the queue limit
- blk_rq_err_bytes (9)
- determine number of bytes till the next failure boundary
- blk_rq_prep_clone (9)
- Helper function to setup clone request
- blk_rq_unmap_user (9)
- unmap a request with user data
- blk_rq_unprep_clone (9)
- Helper function to free all bios in a cloned request
- blk_start_plug (9)
- initialize blk_plug and track it inside the task_struct
- blk_start_request (9)
- start request processing on the driver
- blk_trace_ioctl (9)
- handle the ioctls associated with tracing
- blk_trace_shutdown (9)
- stop and cleanup trace structures
- blk_update_request (9)
- Special helper function for request stacking drivers
- blkdev_get_by_path (9)
- open a block device by name
- blkdev_issue_flush (9)
- queue a flush
- urxvt-block-graphics-to-ascii-256color (1)
- map block graphics to ascii char...
- blockdev (8)
- call block device ioctls from the command line
- blowfish (n)
- Implementation of the Blowfish block cipher
- bluetooth-sendto (1)
- GTK application for transferring files over Bluetooth
- bluetooth-wizard (1)
- GTK wizard for setting up devices with the Linux Bluet...
- bluetoothd (8)
- Bluetooth daemon
- bmtoa (1)
- bitmap editor and converter utilities for the X Window...
- BN_add (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_add_word (3osslssl-3)
- arithmetic functions on BIGNUMs with integers
- BN_BLINDING_is_current_thread (3osslssl-3)
- blinding related BIGNUM functions
- BN_BLINDING_set_current_thread (3osslssl-3)
- blinding related BIGNUM functions
- BN_bn2hex (3osslssl-3)
- format conversions
- BN_check_prime (3osslssl-3)
- generate primes and test for primality
- BN_div (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_div_word (3osslssl-3)
- arithmetic functions on BIGNUMs with integers
- BN_exp (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_gcd (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_get0_nist_prime_192 (3osslssl-3)
- Create standardized public primes or DH...
- BN_get0_nist_prime_224 (3osslssl-3)
- Create standardized public primes or DH...
- BN_get0_nist_prime_256 (3osslssl-3)
- Create standardized public primes or DH...
- BN_get0_nist_prime_384 (3osslssl-3)
- Create standardized public primes or DH...
- BN_get0_nist_prime_521 (3osslssl-3)
- Create standardized public primes or DH...
- BN_hex2bn (3osslssl-3)
- format conversions
- BN_lshift (3osslssl-3)
- bit operations on BIGNUMs
- BN_lshift1 (3osslssl-3)
- bit operations on BIGNUMs
- BN_mod (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_mod_add (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_mod_exp (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_mod_mul (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_mod_sqr (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_mod_sqrt (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_mod_sub (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_mod_word (3osslssl-3)
- arithmetic functions on BIGNUMs with integers
- BN_mul (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_mul_word (3osslssl-3)
- arithmetic functions on BIGNUMs with integers
- BN_nnmod (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_rshift (3osslssl-3)
- bit operations on BIGNUMs
- BN_rshift1 (3osslssl-3)
- bit operations on BIGNUMs
- BN_sqr (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_sub (3osslssl-3)
- arithmetic operations on BIGNUMs
- BN_sub_word (3osslssl-3)
- arithmetic functions on BIGNUMs with integers
- BN_swap (3osslssl-3)
- exchange BIGNUMs
- BN_with_flags (3osslssl-3)
- copy BIGNUMs
- body (n)
- change the body for a class method/proc
- body_checks (5)
- Postfix built-in content inspection
- boggle (6)
- word search game
- boing (6x)
- draws a bouncing ball like the ancient Amiga demo
- booleans (5)
- The SELinux booleans configuration files
- bootchart.conf (5)
- Boot performance analysis graphing tool configuration ...
- bootctl (1)
- Control the firmware and boot manager settings
- Bootloader::Library (3)
- library for accessing configuration of the bootloader
- Bootloader::Path (3)
- abstraction of path constants
- Bootloader::Tools (3)
- set of high-level bootloader configuration functions
- bootparam (7)
- introduction to boot time parameters of the Linux kernel
- border (3ncurses)
- create curses borders, horizontal and vertical lines
- border_set (3ncurses)
- create curses borders or lines using complex characte...
- bouncingcow (6x)
- a happy cow on a trampoline in 3D. Moo.
- box (3ncurses)
- create curses borders, horizontal and vertical lines
- box_set (3ncurses)
- create curses borders or lines using complex character...
- boxed (6x)
- draws a box full of 3D bouncing balls that explode.
- boxfit (6x)
- fills space with a gradient of growing boxes or circles.
- brctl (8)
- ethernet bridge administration
- break (1p)
- exit from for, while, or until loop
- bridge (8)
- show / manipulate bridge addresses and devices
- brk (2)
- change data segment size
- brltty (1)
- refreshable braille display driver for Linux/Unix
- brushtopbm (1)
- convert a doodle brush file into a PBM image
- bsd_signal (3)
- signal handling with BSD semantics
- bsdcpio (1)
- copy files to and from archives
- bsdtar (1)
- manipulate tape archives
- bsearch (3)
- binary search of a sorted array
- bsearch (3p)
- binary search a sorted table
- bsod (6x)
- Blue Screen of Death emulator
- btowc (3)
- convert single byte to wide character
- btowc (3p)
- single byte to wide character conversion
- btree (3)
- btree database access method
- BUF_MEM_free (3osslssl-3)
- simple character array structure
- BUF_MEM_grow (3osslssl-3)
- simple character array structure
- BUF_MEM_grow_clean (3osslssl-3)
- simple character array structure
- BUF_MEM_new (3osslssl-3)
- simple character array structure
- BUF_MEM_new_ex (3osslssl-3)
- simple character array structure
- BUF_reverse (3osslssl-3)
- simple character array structure
- buffchan (8)
- Buffered file-writing backend for INN
- buffindexed.conf (5)
- Configuration for the buffindexed overview method
- build (1)
- build SuSE Linux RPMs in a chroot environment
- build-classpath (1)
- build a Java CLASSPATH with the named JARs
- buildhash (1)
- Interactive spelling checking
- bumps (6x)
- move distorting spotlight around desktop
- Bundle::DBD::CSV (3)
- A bundle to install the DBD::CSV driver
- bundledoc (1)
- bundle all the files needed by a LaTeX document
- bus_for_each_dev (9)
- device iterator.
- bus_for_each_drv (9)
- driver iterator
- bus_rescan_devices (9)
- rescan devices on the bus for possible drivers
- bus_unregister (9)
- remove a bus from the system
- busctl (1)
- Introspect the bus
- byteorder (3)
- convert values between host and network byte order
- bytes (3)
- Perl pragma to expose the individual bytes of characters
- bzegrep (1)
- search possibly bzip2 compressed files for a regular e...
- bzfgrep (1)
- search possibly bzip2 compressed files for a regular e...
- bzgrep (1)
- search possibly bzip2 compressed files for a regular e...
- c_rehash (1osslssl-3)
- Create symbolic links to files named by the hash values
- cacheflush (2)
- flush contents of instruction and/or data cache
- cachemgr.cgi (8)
- Squid HTTP proxy manager CGI web interface
- cacosh (3)
- complex arc hyperbolic cosine
- cacosh (3p)
- complex arc hyperbolic cosine functions
- cacoshf (3)
- complex arc hyperbolic cosine
- cacoshl (3)
- complex arc hyperbolic cosine
- caesar (6)
- decrypt caesar ciphers
- cage (6x)
- Escher's impossible cage, for xscreensaver.
- calculate_imbalance (9)
- Calculate the amount of imbalance present within th...
- calibrate_lens_gui (1)
- Lens distortion calibration by straight line feature...
- call_usermodehelper (9)
- prepare and start a usermode application
- call_usermodehelper_exec (9)
- start a usermode application
- call_usermodehelper_setup (9)
- prepare to call a usermode helper
- callgrind_annotate (1)
- post-processing tool for the Callgrind
- can_change_color (3ncurses)
- curses color manipulation routines
- can_change_color_sp (3ncurses)
- curses screen-pointer extension
- Canary::Stability (3)
- canary to check perl compatibility for schmorp's modules
- cancel_delayed_work_sync (9)
- cancel a delayed work and wait for it to finish
- cancel_work_sync (9)
- cancel a work and wait for it to finish
- canfield (6)
- the solitaire card game canfield
- canonicalize_file_name (3)
- return the canonicalized absolute pathname
- canvas (n)
- Create and manipulate 'canvas' hypergraphics drawing s...
- capget (2)
- set/get capabilities of thread(s)
- capng_apply (3)
- apply the stored capabilities settings
- capng_change_id (3)
- change the credentials retaining capabilities
- capng_clear (3)
- clear chosen capabilities set
- capng_fill (3)
- fill chosen capabilities set
- capng_get_caps_process (3)
- get the capabilities from a process
- capng_have_capabilities (3)
- general check for capabilities
- capng_have_capability (3)
- check for specific capability
- capng_lock (3)
- lock the current process capabilities settings
- capng_restore_state (3)
- set the internal library state
- capng_save_state (3)
- get the internal library state
- capng_update (3)
- update the stored capabilities settings
- capng_updatev (3)
- update the stored capabilities settings
- capset (2)
- set/get capabilities of thread(s)
- capsh (1)
- capability shell wrapper
- carg (3)
- calculate the complex argument
- cargf (3)
- calculate the complex argument
- cargl (3)
- calculate the complex argument
- cargo-bench (1)
- (unknown subject)
- cargo-check (1)
- (unknown subject)
- cargo-fetch (1)
- (unknown subject)
- cargo-help (1)
- (unknown subject)
- cargo-publish (1)
- (unknown subject)
- cargo-search (1)
- (unknown subject)
- casinh (3)
- complex arc sine hyperbolic
- casinh (3p)
- complex arc hyperbolic sine functions
- casinhf (3)
- complex arc sine hyperbolic
- casinhl (3)
- complex arc sine hyperbolic
- cat (1)
- concatenate files and print on the standard output
- cat (n)
- Concatenation channel
- catanh (3)
- complex arc tangents hyperbolic
- catanh (3p)
- complex arc hyperbolic tangent functions
- catanhf (3)
- complex arc tangents hyperbolic
- catanhl (3)
- complex arc tangents hyperbolic
- catch (n)
- Evaluate script and trap exceptional returns
- catchsegv (1)
- Catch segmentation faults in programs
- catman (8)
- create or update the pre-formatted manual pages
- ccache (1)
- a fast C/C++ compiler cache
- cccheck (1)
- Perform static code contracts verification for CLR ass...
- ccecho (1)
- ccecho (conditional color echo) let's you use colored ...
- cciss (4)
- HP Smart Array block driver
- ccomps (1)
- connected components filter for graphs
- ccosh (3)
- complex hyperbolic cosine
- ccosh (3p)
- complex hyperbolic cosine functions
- ccoshf (3)
- complex hyperbolic cosine
- ccoshl (3)
- complex hyperbolic cosine
- ccw_device_get_chp_desc (9)
- return newly allocated channel-path descriptor
- ccw_device_get_ciw (9)
- Search for CIW command in extended sense data.
- ccw_device_get_path_mask (9)
- get currently available paths
- ccw_device_get_schid (9)
- obtain a subchannel id
- ccw_device_halt (9)
- halt I/O request processing
- ccw_device_is_multipath (9)
- determine if device is operating in multipath mode
- ccw_device_is_pathgroup (9)
- determine if paths to this device are grouped
- ccw_device_resume (9)
- resume channel program execution
- ccw_device_set_options_mask (9)
- set some options and unset the rest
- ccw_device_start (9)
- start a s390 channel program
- ccw_device_start_key (9)
- start a s390 channel program with key
- ccw_device_start_timeout (9)
- start a s390 channel program with timeout
- ccw_device_start_timeout_key (9)
- start a s390 channel program with timeout ...
- cd (1p)
- change the working directory
- cd (n)
- Change working directory
- cdda2mp3 (1)
- extract audio CD audio tracks and encode them
- cdda2ogg (1)
- extract audio CD audio tracks and encode them
- cdda2wav (1)
- a sampling utility that dumps CD audio data into wav s...
- cdev_add (9)
- add a char device to the system
- cdev_del (9)
- remove a cdev from the system
- cdparanoia (1)
- an audio CD reading utility which includes extra data ...
- ceil (3)
- ceiling function: smallest integral value not less tha...
- ceilf (3)
- ceiling function: smallest integral value not less tha...
- ceill (3)
- ceiling function: smallest integral value not less tha...
- celtic (6x)
- draws celtic cross-stich patterns
- cfg80211_auth_timeout (9)
- notification of timed out authentication
- cfg80211_check_combinations (9)
- check interface combinations
- cfg80211_classify8021d (9)
- determine the 802.1p/1d tag for a data frame
- cfg80211_disconnected (9)
- notify cfg80211 that connection was dropped
- cfg80211_ibss_joined (9)
- notify cfg80211 that device joined an IBSS
- cfg80211_inform_bss_width (9)
- inform cfg80211 of a new BSS
- cfg80211_inform_bss_width_frame (9)
- inform cfg80211 of a received BSS frame
- cfg80211_michael_mic_failure (9)
- notification of Michael MIC failure (TKIP)
- cfg80211_ready_on_channel (9)
- notification of remain_on_channel start
- cfg80211_remain_on_channel_expired (9)
- remain_on_channel duration expired
- cfg80211_scan_done (9)
- notify that scan finished
- cfg80211_testmode_event (9)
- send the event
- cfg80211_testmode_reply (9)
- send the reply skb
- cfg80211_tx_mlme_mgmt (9)
- notification of transmitted deauth/disassoc frame
- cflow (1p)
- generate a C-language flowgraph (DEVELOPMENT)
- cfscores (6)
- the solitaire card game canfield
- cg_annotate (1)
- post-processing tool for Cachegrind
- cg_diff (1)
- compares two Cachegrind output files
- cg_merge (1)
- merges multiple Cachegrind output files into one
- CGI (3)
- Handle Common Gateway Interface requests and responses
- CGI::Carp (3)
- CGI routines for writing to the HTTPD (or other) error...
- CGI::Cookie (3)
- Interface to HTTP Cookies
- CGI::HTML::Functions (3)
- Documentation for CGI.pm Legacy HTML Functionality
- CGI::Pretty (3)
- module to produce nicely formatted HTML code
- CGI::Push (3)
- Simple Interface to Server Push
- chacl (1)
- change the access control list of a file or directory
- chage (1)
- change user password expiry information
- chan (n)
- Read, write and manipulate channels
- change_bit (9)
- Toggle a bit in memory
- change_hat (2)
- change to or from a "hat" within a AppArmor profile
- changelog (n)
- Processing text in Emacs ChangeLog format
- charmap (5)
- characters to define character sets
- charnames (3)
- access to Unicode character names and named character ...
- charsets (7)
- character set standards and internationalization
- chat (8)
- Automated conversational script with a modem
- chattr (1)
- change file attributes on a Linux file system
- chcon (1)
- change file security context
- chcpu (8)
- configure CPUs
- chdir (2)
- change working directory
- chdir (3p)
- change working directory
- check-regexp (1)
- test regular expressions from the command line
- check_asym_packing (9)
- Check to see if the group is packed into the sched d...
- check_conflicting_open (9)
- see if the given dentry points to a file that ha...
- check_create (9)
- [GENERIC] create and write bbt(s) if necessary
- check_disk_size_change (9)
- checks for disk size change and adjusts bdev size.
- check_hd (1)
- (unknown subject)
- check_pattern (9)
- [GENERIC] check if a pattern is in the buffer
- check_short_pattern (9)
- [GENERIC] check if a pattern is in the buffer
- check_submounts_and_drop (9)
- prune dcache, check for submounts and drop
- checkbutton (n)
- Create and manipulate 'checkbutton' boolean selection ...
- checkdirfile (1)
- verify Dirfile database metadata
- checkmk (1)
- Awk script for generating C unit tests for use with th...
- checkmodule (8)
- SELinux policy module compiler
- checkPasswdAccess (3)
- query the SELinux policy database in the kernel
- CHECKPOINT (7pg161)
- force a write-ahead log checkpoint
- checkpolicy (8)
- SELinux policy compiler
- checkproc (8)
- Checks for a process by full path name
- checkpto (1)
- Helper program for Hugin's Makefile assistant
- checkXML (1)
- An XML lint tool for KDE DocBook XML documents.
- chem (1)
- groff preprocessor for producing chemical structure di...
- chfn (1)
- change real user name and information
- chgat (3ncurses)
- curses character and window attribute control routines
- chgrp (1)
- change group ownership
- chgrp (1p)
- change the file group ownership
- chkconfig (8)
- enable or disable system services
- chkfont (6)
- checks figlet 2.0 and up font files for format errors
- chkstat (8)
- Tool to check and set file permissions
- chktex (1)
- finds typographic errors in LaTeX.
- chktrust (1)
- Check the trust of a PE executable.
- chkweb (1)
- runs the LaTeX parts of a CWEB file through chktex
- chmod (1)
- change file mode bits
- chmod (1p)
- change the file modes
- chmod (2)
- change permissions of a file
- chmod (3p)
- change mode of a file relative to directory file descr...
- tc-choke (8)
- choose and keep scheduler
- chooser (1)
- X Display Manager with support for XDMCP, host chooser
- chown (1)
- change file owner and group
- chown (1p)
- change the file ownership
- chown (2)
- change ownership of a file
- chown (3p)
- change owner and group of a file relative to directory...
- chown32 (2)
- change ownership of a file
- chpasswd (8)
- update passwords in batch mode
- chroot (1)
- run command or interactive shell with special root dir...
- chroot (2)
- change root directory
- chrt (1)
- manipulate the real-time attributes of a process
- chsh (1)
- change login shell
- chvt (1)
- change foreground virtual terminal
- ci (1)
- check in RCS revisions
- cifs.idmap (8)
- Userspace helper for mapping ids for Common Internet F...
- cifs.upcall (8)
- Userspace upcall helper for Common Internet File Syste...
- ciphers (1osslssl-3)
- OpenSSL application commands
- ciptool (1)
- Bluetooth Common ISDN Access Profile (CIP)
- CIRCLEQ_HEAD (3)
- implementations of lists, tail queues, and circular qu...
- CIRCLEQ_INSERT_HEAD (3)
- implementations of lists, tail queues, and circular...
- circo (1)
- filter for circular layout of graphs
- cisco-decrypt (1)
- decrypts an obfuscated Cisco vpn client pre-shared key
- ckalloc (3)
- allocate or free heap memory
- ckfree (3)
- allocate or free heap memory
- ckpasswd (8)
- nnrpd password authenticator
- ckrealloc (3)
- allocate or free heap memory
- cksum (1)
- checksum and count the bytes in a file
- cksum (1p)
- write file checksums and sizes
- cksum (n)
- Calculate a cksum(1) compatible checksum
- clamdtop (1)
- monitor the Clam AntiVirus Daemon
- clamp (9)
- return a value clamped to a given range with strict ty...
- Class::HPLOO (3pm)
- Easier way to declare classes on Perl, based in the po...
- Class::HPLOO::InlineC (3pm)
- Add a pseudo syntax over C to work easier with ...
- Class::MOP::Method (3pm)
- Method Meta Object
- Class::MOP::Method::Accessor (3pm)
- Method Meta Object for accessors
- Class::MOP::Method::Constructor (3pm)
- Method Meta Object for constructors
- Class::MOP::Method::Generated (3pm)
- Abstract base class for generated methods
- Class::MOP::Method::Inlined (3pm)
- Method base class for methods which have ...
- Class::MOP::Method::Meta (3pm)
- Method Meta Object for "meta" methods
- Class::MOP::Method::Overload (3pm)
- Method Meta Object for methods which imp...
- Class::MOP::Method::Wrapped (3pm)
- Method Meta Object for methods with befor...
- Class::MOP::Mixin::AttributeCore (3pm)
- Core attributes shared by attribute ...
- Class::MOP::Mixin::HasAttributes (3pm)
- Methods for metaclasses which have a...
- Class::MOP::Mixin::HasMethods (3pm)
- Methods for metaclasses which have methods
- class_dev_iter_exit (9)
- finish iteration
- class_dev_iter_next (9)
- iterate to the next device
- class_for_each_device (9)
- device iterator
- class_id_show (9)
- Displays class id of I2O device
- cleanup_digikamdb (1)
- Cleanup the digiKam databases to reduce their sizes a...
- clear (1)
- clear the terminal screen
- clearenv (3)
- clear the environment
- clearerr (3)
- check and reset stream status
- ClientWhitePointOfCCC (3)
- Color Conversion Context macros
- urxvt-clipboard-osc-256color (1)
- implement the clipboard operating system c...
- clk_disable (9)
- inform the system when the clock source is no longer r...
- clk_enable (9)
- inform the system when the clock source should be runn...
- clk_get_accuracy (9)
- obtain the clock accuracy in ppb (parts per billion) f...
- clk_get_parent (9)
- get the parent clock source for this clock
- clk_get_rate (9)
- obtain the current clock rate (in Hz) for a clock sour...
- clk_get_sys (9)
- get a clock based upon the device name
- clk_notifier_register (9)
- change notifier callback
- clk_notifier_unregister (9)
- change notifier callback
- clk_put (9)
- "free" the clock source
- clk_round_rate (9)
- adjust a rate to the exact rate a clock can provide
- clk_set_parent (9)
- set the parent clock source for this clock
- clk_set_rate (9)
- set the clock rate for a clock source
- rpc_clnt_create (3t)
- "library routines for dealing with creation and manipu...
- clock_nanosleep (2)
- high-resolution sleep with specifiable clock
- clock_nanosleep (3p)
- high resolution sleep with specifiable clock
- clockdiff (8)
- measure clock difference between hosts
- clog (3)
- natural logarithm of a complex number
- clog (3p)
- complex natural logarithm functions
- clog10 (3)
- base-10 logarithm of a complex number
- clog10f (3)
- base-10 logarithm of a complex number
- clog10l (3)
- base-10 logarithm of a complex number
- clog2 (3)
- base-2 logarithm of a complex number
- clog2f (3)
- base-2 logarithm of a complex number
- clog2l (3)
- base-2 logarithm of a complex number
- clogf (3)
- natural logarithm of a complex number
- clogl (3)
- natural logarithm of a complex number
- clone (2)
- create a child process
- clone2 (2)
- create a child process
- close (n)
- Close an open channel
- closelog (3)
- send messages to the system logger
- clrunimap (8)
- Clear the current console unicode map
- cluster (1)
- find clusters in a graph and augment the graph with th...
- cmanicd (8)
- SNMP NIC Agents to support Insight Manager 7.
- cmf_read (9)
- read one value from the current channel measurement block
- cmf_readall (9)
- read the current channel measurement block
- CMS_AuthEnvelopedData_create (3osslssl-3)
- Create CMS envelope
- CMS_AuthEnvelopedData_create_ex (3osslssl-3)
- Create CMS envelope
- CMSG_FIRSTHDR (3)
- access ancillary data
- CMSG_NXTHDR (3)
- access ancillary data
- cnf (1)
- A command-not-found handler
- cnfsheadconf (8)
- Read and write CNFS headers
- cnfsstat (8)
- Show usage of CNFS buffers
- cnid_dbd (8)
- implement access to CNID databases through a dedicated...
- co (1)
- check out RCS revisions
- code (n)
- capture the namespace context for a code fragment
- tc-fq_codel (8)
- Fair Queuing (FQ) with Controlled Delay (CoDel)
- color_set (3ncurses)
- curses character and window attribute control routines
- combinatorics (n)
- Combinatorial functions in the Tcl Math Library
- combinediff (1)
- create a cumulative unified patch from two incremental...
- comm_wire (n)
- The comm wire protocol
- command-not-found (1)
- A command-not-found handler
- COMMIT (7pg161)
- commit the current transaction
- COMMIT_PREPARED (7pg161)
- commit a transaction that was earlier prepared for...
- compare (1)
- mathematically and visually annotate the difference be...
- compare_ether_header (9)
- Compare two Ethernet headers
- complex (7)
- basics of complex mathematics
- complex.h (0p)
- complex arithmetic
- composite (1)
- overlaps one image over another.
- concat (n)
- Join lists together
- cond_synchronize_rcu (9)
- Conditionally wait for an RCU grace period
- CONF_modules_finish (3osslssl-3)
- OpenSSL configuration cleanup functions
- selinux_config (5)
- The SELinux sub-system configuration file.
- config (7)
- More than you probably want to know about npm configur...
- Config::Extensions (3)
- hash lookup of which core extensions were built.
- config_data (1)
- Query or change configuration of Perl modules
- config_ep_by_speed (9)
- configures the given endpoint according to gadget sp...
- configbody (n)
- change the "config" code for a public variable
- conj (3)
- calculate the complex conjugate
- conjf (3)
- calculate the complex conjugate
- conjl (3)
- calculate the complex conjugate
- conjure (1)
- interprets and executes scripts written in the Magick ...
- console (n)
- Control the console on systems without a real console
- console_conditional_schedule (9)
- yield the CPU if required
- console_lock (9)
- lock the console system for exclusive use.
- console_trylock (9)
- try to lock the console system for exclusive use.
- console_unlock (9)
- unlock the console system
- constants (n)
- Mathematical and numerical constants
- container (n)
- Holding tables of contents
- container_of (9)
- cast a member of a structure out to the containing str...
- continue (1p)
- continue for, while, or until loop
- continue (n)
- Skip to the next iteration of a loop
- control.ctl (5)
- Specify handling of Usenet control messages
- controlchan (8)
- Channel-fed control message handler
- controlscreenshots (3)
- .TH "controlscreenshots" 3 "Mon Aug 1 2011" "Version...
- convdate (1)
- Convert to/from RFC 5322 dates and seconds since epoch
- Convert::UUlib (3pm)
- Perl interface to the uulib library (a.k.a. uudeview/u...
- convert_hd (1)
- (unknown subject)
- coral (6x)
- simulates coral growth, albeit somewhat slowly.
- core (n)
- Basic reflected/virtual channel support
- cosh (3)
- hyperbolic cosine function
- cosh (3p)
- hyperbolic cosine functions
- coshf (3)
- hyperbolic cosine function
- coshl (3)
- hyperbolic cosine function
- countmail (6)
- be obnoxious about how much mail you have
- cp1251 (7)
- CP 1251 character set encoded in octal, decimal, and h...
- cpan (1)
- easily interact with CPAN from the command line
- cpan-mirrors (1)
- Find the fatest CPAN mirrors nearby
- CPAN::Admin (3pm)
- A CPAN Shell for CPAN admins
- CPAN::Reporter::History (3pm)
- Read or write a CPAN::Reporter history log
- CPAN::Reporter::PrereqCheck (3pm)
- Modulino for prerequisite tests
- cpclean (1)
- Remove wrong control points by statistical methods
- cpfind (1)
- Feature matching for panoramic stitching
- cpio (1)
- copy files to and from archives
- cpio.h (0p)
- cpio archive values
- cpp-13 (1)
- The C Preprocessor
- cpp-4.9 (1)
- The C Preprocessor
- cppunit-config (1)
- script to get information about the installed version ...
- cproj (3)
- project into Riemann Sphere
- cprojf (3)
- project into Riemann Sphere
- cprojl (3)
- project into Riemann Sphere
- cpupri_cleanup (9)
- clean up the cpupri structure
- cpupri_find (9)
- find the best (lowest-pri) CPU in the system
- cpupri_init (9)
- initialize the cpupri structure
- cpupri_set (9)
- update the cpu priority setting
- crackberg (6x)
- Lose your way wandering some height fields, and enjoy ...
- crc16 (9)
- compute the CRC-16 for the data buffer
- crc16 (n)
- Perform a 16bit Cyclic Redundancy Check
- crc7_be (9)
- update the CRC7 for the data buffer
- crc_ccitt (9)
- recompute the CRC for the data buffer
- crc_itu_t (9)
- Compute the CRC-ITU-T for the data buffer
- CREATE_ACCESS_METHOD (7pg161)
- define a new access method
- create_bbt (9)
- [GENERIC] Create a bad block table by scanning the device
- CREATE_SCHEMA (7pg161)
- define a new schema
- CREATE_TABLE_AS (7pg161)
- define a new table from the results of a query
- CREATE_TEXT_SEARCH_CONFIGURATION (7pg161)
- define a new text search configur...
- CREATE_TEXT_SEARCH_DICTIONARY (7pg161)
- define a new text search dictionary
- CREATE_TEXT_SEARCH_PARSER (7pg161)
- define a new text search parser
- CREATE_TEXT_SEARCH_TEMPLATE (7pg161)
- define a new text search template
- cribbage (6)
- the card game cribbage
- cron (8)
- daemon to execute scheduled commands
- crond (8)
- daemon to execute scheduled commands
- crontab (1p)
- schedule periodic background work
- crontab (5)
- files used to schedule the execution of programs
- crypt (3)
- password hashing
- Crypt::AuthEnc (3)
- [internal only]
- Crypt::AuthEnc::CCM (3)
- Authenticated encryption in CCM mode
- Crypt::AuthEnc::ChaCha20Poly1305 (3)
- Authenticated encryption in ChaCha20-P...
- Crypt::AuthEnc::EAX (3)
- Authenticated encryption in EAX mode
- Crypt::AuthEnc::GCM (3)
- Authenticated encryption in GCM mode
- Crypt::AuthEnc::OCB (3)
- Authenticated encryption in OCBv3 mode
- Crypt::Checksum (3)
- [internal only]
- Crypt::Checksum::Adler32 (3)
- Compute Adler32 checksum
- Crypt::Checksum::CRC32 (3)
- Compute CRC32 checksum
- Crypt::Cipher (3)
- Generic interface to cipher functions
- Crypt::Cipher::AES (3)
- Symmetric cipher AES (aka Rijndael), key size: 128/1...
- Crypt::Cipher::Anubis (3)
- Symmetric cipher Anubis, key size: 128-320 bits
- Crypt::Cipher::Blowfish (3)
- Symmetric cipher Blowfish, key size: 64-448 bits
- Crypt::Cipher::Camellia (3)
- Symmetric cipher Camellia, key size: 128/192/25...
- Crypt::Cipher::CAST5 (3)
- Symmetric cipher CAST5 (aka CAST-128), key size: 4...
- Crypt::Cipher::DES (3)
- Symmetric cipher DES, key size: 64[56] bits
- Crypt::Cipher::DES_EDE (3)
- Symmetric cipher DES_EDE (aka Triple-DES, 3DES),...
- Crypt::Cipher::IDEA (3)
- Symmetric cipher IDEA, key size: 128 bits
- Crypt::Cipher::KASUMI (3)
- Symmetric cipher KASUMI, key size: 128 bits
- Crypt::Cipher::Khazad (3)
- Symmetric cipher Khazad, key size: 128 bits
- Crypt::Cipher::MULTI2 (3)
- Symmetric cipher MULTI2, key size: 320 bits
- Crypt::Cipher::Noekeon (3)
- Symmetric cipher Noekeon, key size: 128 bits
- Crypt::Cipher::RC2 (3)
- Symmetric cipher RC2, key size: 40-1024 bits
- Crypt::Cipher::RC5 (3)
- Symmetric cipher RC5, key size: 64-1024 bits
- Crypt::Cipher::RC6 (3)
- Symmetric cipher RC6, key size: 64-1024 bits
- Crypt::Cipher::SAFER_K128 (3)
- Symmetric cipher SAFER_K128, key size: 128 bits
- Crypt::Cipher::SAFER_K64 (3)
- Symmetric cipher SAFER_K64, key size: 64 bits
- Crypt::Cipher::SAFER_SK128 (3)
- Symmetric cipher SAFER_SK128, key size: 128 ...
- Crypt::Cipher::SAFER_SK64 (3)
- Symmetric cipher SAFER_SK64, key size: 64 bits
- Crypt::Cipher::SAFERP (3)
- Symmetric cipher SAFER+, key size: 128/192/256 bits
- Crypt::Cipher::SEED (3)
- Symmetric cipher SEED, key size: 128 bits
- Crypt::Cipher::Serpent (3)
- Symmetric cipher Serpent, key size: 128/192/256 ...
- Crypt::Cipher::Skipjack (3)
- Symmetric cipher Skipjack, key size: 80 bits
- Crypt::Cipher::Twofish (3)
- Symmetric cipher Twofish, key size: 128/192/256 ...
- Crypt::Cipher::XTEA (3)
- Symmetric cipher XTEA, key size: 128 bits
- Crypt::Digest (3)
- Generic interface to hash/digest functions
- Crypt::Digest::BLAKE2b_160 (3)
- Hash function BLAKE2b [size: 160 bits]
- Crypt::Digest::BLAKE2b_256 (3)
- Hash function BLAKE2b [size: 256 bits]
- Crypt::Digest::BLAKE2b_384 (3)
- Hash function BLAKE2b [size: 384 bits]
- Crypt::Digest::BLAKE2b_512 (3)
- Hash function BLAKE2b [size: 512 bits]
- Crypt::Digest::BLAKE2s_128 (3)
- Hash function BLAKE2s [size: 128 bits]
- Crypt::Digest::BLAKE2s_160 (3)
- Hash function BLAKE2s [size: 160 bits]
- Crypt::Digest::BLAKE2s_224 (3)
- Hash function BLAKE2s [size: 224 bits]
- Crypt::Digest::BLAKE2s_256 (3)
- Hash function BLAKE2s [size: 256 bits]
- Crypt::Digest::CHAES (3)
- Hash function - CipherHash based on AES [size: 128...
- Crypt::Digest::Keccak224 (3)
- Hash function Keccak-224 [size: 224 bits]
- Crypt::Digest::Keccak256 (3)
- Hash function Keccak-256 [size: 256 bits]
- Crypt::Digest::Keccak384 (3)
- Hash function Keccak-384 [size: 384 bits]
- Crypt::Digest::Keccak512 (3)
- Hash function Keccak-512 [size: 512 bits]
- Crypt::Digest::MD2 (3)
- Hash function MD2 [size: 128 bits]
- Crypt::Digest::MD4 (3)
- Hash function MD4 [size: 128 bits]
- Crypt::Digest::MD5 (3)
- Hash function MD5 [size: 128 bits]
- Crypt::Digest::RIPEMD128 (3)
- Hash function RIPEMD-128 [size: 128 bits]
- Crypt::Digest::RIPEMD160 (3)
- Hash function RIPEMD-160 [size: 160 bits]
- Crypt::Digest::RIPEMD256 (3)
- Hash function RIPEMD-256 [size: 256 bits]
- Crypt::Digest::RIPEMD320 (3)
- Hash function RIPEMD-320 [size: 320 bits]
- Crypt::Digest::SHA1 (3)
- Hash function SHA-1 [size: 160 bits]
- Crypt::Digest::SHA224 (3)
- Hash function SHA-224 [size: 224 bits]
- Crypt::Digest::SHA256 (3)
- Hash function SHA-256 [size: 256 bits]
- Crypt::Digest::SHA384 (3)
- Hash function SHA-384 [size: 384 bits]
- Crypt::Digest::SHA3_224 (3)
- Hash function SHA3-224 [size: 224 bits]
- Crypt::Digest::SHA3_256 (3)
- Hash function SHA3-256 [size: 256 bits]
- Crypt::Digest::SHA3_384 (3)
- Hash function SHA3-384 [size: 384 bits]
- Crypt::Digest::SHA3_512 (3)
- Hash function SHA3-512 [size: 512 bits]
- Crypt::Digest::SHA512 (3)
- Hash function SHA-512 [size: 512 bits]
- Crypt::Digest::SHA512_224 (3)
- Hash function SHA-512/224 [size: 224 bits]
- Crypt::Digest::SHA512_256 (3)
- Hash function SHA-512/256 [size: 256 bits]
- Crypt::Digest::SHAKE (3)
- Hash functions SHAKE128, SHAKE256 from SHA3 family
- Crypt::Digest::Tiger192 (3)
- Hash function Tiger-192 [size: 192 bits]
- Crypt::Digest::Whirlpool (3)
- Hash function Whirlpool [size: 512 bits]
- Crypt::KeyDerivation (3)
- PBKDF1, PBKDF2 and HKDF key derivation functions
- Crypt::Mac::BLAKE2b (3)
- Message authentication code BLAKE2b MAC (RFC 7693)
- Crypt::Mac::BLAKE2s (3)
- Message authentication code BLAKE2s MAC (RFC 7693)
- Crypt::Mac::F9 (3)
- Message authentication code F9
- Crypt::Mac::HMAC (3)
- Message authentication code HMAC
- Crypt::Mac::OMAC (3)
- Message authentication code OMAC
- Crypt::Mac::Pelican (3)
- Message authentication code Pelican (AES based MAC)
- Crypt::Mac::PMAC (3)
- Message authentication code PMAC
- Crypt::Mac::Poly1305 (3)
- Message authentication code Poly1305 (RFC 7539)
- Crypt::Mac::XCBC (3)
- Message authentication code XCBC (RFC 3566)
- Crypt::Mode::CBC (3)
- Block cipher mode CBC [Cipher-block chaining]
- Crypt::Mode::CFB (3)
- Block cipher mode CFB [Cipher feedback]
- Crypt::Mode::CTR (3)
- Block cipher mode CTR [Counter mode]
- Crypt::Mode::ECB (3)
- Block cipher mode ECB [Electronic codebook]
- Crypt::Mode::OFB (3)
- Block cipher mode OFB [Output feedback]
- Crypt::OpenSSL::Bignum (3)
- OpenSSL's multiprecision integer arithmetic
- Crypt::OpenSSL::Bignum::CTX (3)
- Perl interface to the OpenSSL BN_CTX struct...
- Crypt::OpenSSL::Guess (3)
- Guess OpenSSL include path
- Crypt::PK::DH (3)
- Public key cryptography based on Diffie-Hellman
- Crypt::PK::DSA (3)
- Public key cryptography based on DSA
- Crypt::PK::ECC (3)
- Public key cryptography based on EC
- Crypt::PK::RSA (3)
- Public key cryptography based on RSA
- Crypt::PK::X25519 (3)
- Asymmetric cryptography based on X25519
- Crypt::PRNG (3)
- Cryptographically secure random number generator
- Crypt::PRNG::ChaCha20 (3)
- Cryptographically secure PRNG based on ChaCha20 (...
- Crypt::PRNG::Fortuna (3)
- Cryptographically secure PRNG based on Fortuna alg...
- Crypt::PRNG::RC4 (3)
- Cryptographically secure PRNG based on RC4 (stream cip...
- Crypt::PRNG::Sober128 (3)
- Cryptographically secure PRNG based on Sober128 (...
- Crypt::PRNG::Yarrow (3)
- Cryptographically secure PRNG based on Yarrow algor...
- Crypt::SmbHash (3pm)
- Perl-only implementation of lanman and nt md4 hash fun...
- Crypt::Stream::ChaCha (3)
- Stream cipher ChaCha
- Crypt::Stream::Rabbit (3)
- Stream cipher Rabbit
- Crypt::Stream::RC4 (3)
- Stream cipher RC4
- Crypt::Stream::Salsa20 (3)
- Stream cipher Salsa20
- Crypt::Stream::Sober128 (3)
- Stream cipher Sober128
- Crypt::Stream::Sosemanuk (3)
- Stream cipher Sosemanuk
- crypt_gensalt (3)
- password hashing
- crypt_gensalt_ra (3)
- password hashing
- crypt_gensalt_rn (3)
- password hashing
- crypt_r (3)
- password hashing
- crypt_ra (3)
- password hashing
- crypt_rn (3)
- password hashing
- crypto (7osslssl-3)
- OpenSSL cryptographic library
- CRYPTO_atomic_add (3osslssl-3)
- OpenSSL thread support
- CRYPTO_atomic_load (3osslssl-3)
- OpenSSL thread support
- CRYPTO_atomic_or (3osslssl-3)
- OpenSSL thread support
- CRYPTO_mem_debug_push (3osslssl-3)
- Memory allocation functions
- CRYPTO_secure_allocated (3osslssl-3)
- secure heap storage
- CRYPTO_secure_clear_free (3osslssl-3)
- secure heap storage
- CRYPTO_secure_free (3osslssl-3)
- secure heap storage
- CRYPTO_secure_malloc (3osslssl-3)
- secure heap storage
- CRYPTO_secure_malloc_done (3osslssl-3)
- secure heap storage
- CRYPTO_secure_malloc_init (3osslssl-3)
- secure heap storage
- CRYPTO_secure_malloc_initialized (3osslssl-3)
- secure heap storage
- CRYPTO_secure_used (3osslssl-3)
- secure heap storage
- CRYPTO_secure_zalloc (3osslssl-3)
- secure heap storage
- CRYPTO_THREAD_lock_free (3osslssl-3)
- OpenSSL thread support
- CRYPTO_THREAD_lock_new (3osslssl-3)
- OpenSSL thread support
- CRYPTO_THREAD_read_lock (3osslssl-3)
- OpenSSL thread support
- CRYPTO_THREAD_run_once (3osslssl-3)
- OpenSSL thread support
- CRYPTO_THREAD_unlock (3osslssl-3)
- OpenSSL thread support
- CRYPTO_THREAD_write_lock (3osslssl-3)
- OpenSSL thread support
- CryptX (3)
- Cryptographic toolkit
- csh (1)
- C shell with file name completion and command line edi...
- csharp (1)
- Interactive C# Shell
- csinh (3)
- complex hyperbolic sine
- csinh (3p)
- complex hyperbolic sine functions
- csinhf (3)
- complex hyperbolic sine
- csinhl (3)
- complex hyperbolic sine
- csum_partial_copy_to_xdr (9)
- checksum and copy data
- csv (n)
- Procedures to handle CSV data.
- CT_POLICY_EVAL_CTX_free (3osslssl-3)
- Encapsulates the data required to eval...
- CT_POLICY_EVAL_CTX_get0_cert (3osslssl-3)
- Encapsulates the data required to...
- CT_POLICY_EVAL_CTX_get0_issuer (3osslssl-3)
- Encapsulates the data required ...
- CT_POLICY_EVAL_CTX_get0_log_store (3osslssl-3)
- Encapsulates the data requir...
- CT_POLICY_EVAL_CTX_get_time (3osslssl-3)
- Encapsulates the data required to ...
- CT_POLICY_EVAL_CTX_new (3osslssl-3)
- Encapsulates the data required to evalu...
- CT_POLICY_EVAL_CTX_new_ex (3osslssl-3)
- Encapsulates the data required to ev...
- CT_POLICY_EVAL_CTX_set1_cert (3osslssl-3)
- Encapsulates the data required to...
- CT_POLICY_EVAL_CTX_set1_issuer (3osslssl-3)
- Encapsulates the data required ...
- CT_POLICY_EVAL_CTX_set_shared_CTLOG_S... (3osslssl-3)
- Encapsulates the data...
- CT_POLICY_EVAL_CTX_set_time (3osslssl-3)
- Encapsulates the data required to ...
- ctanh (3)
- complex hyperbolic tangent
- ctanh (3p)
- complex hyperbolic tangent functions
- ctanhf (3)
- complex hyperbolic tangent
- ctanhl (3)
- complex hyperbolic tangent
- ctermid (3p)
- generate a pathname for the controlling terminal
- ctie (1)
- merge or apply CWEB change files
- ctlinnd (8)
- Control the main InterNetNews daemon
- ctrlaltdel (8)
- set the function of the Ctrl-Alt-Del combination
- ctype.h (0p)
- character types
- cube21 (6x)
- animates the Cube 21 puzzle
- cubestorm (6x)
- a series of 3D boxes that fill space
- cups-browsed (8)
- A daemon for browsing the Bonjour broadcasts of shared...
- cups-deviced (8)
- cupsd helper programs (deprecated)
- cups-driverd (8)
- cupsd helper programs (deprecated)
- cups-exec (8)
- cupsd helper programs (deprecated)
- cups-genppd (8)
- generate Gutenprint PPD files for use with CUPS
- cupsd (8)
- cups scheduler
- cupsd-helper (8)
- cupsd helper programs (deprecated)
- cupsfilter (8)
- convert a file to another format using cups filters (d...
- curl_easy_cleanup (3)
- End a libcurl easy handle
- curl_easy_duphandle (3)
- Clone a libcurl session handle
- curl_easy_escape (3)
- URL encodes the given string
- curl_easy_getinfo (3)
- extract information from a curl handle
- curl_easy_header (3)
- get an HTTP header
- curl_easy_nextheader (3)
- get the next HTTP header
- curl_easy_reset (3)
- reset all options of a libcurl session handle
- curl_easy_setopt (3)
- set options for a curl easy handle
- curl_easy_unescape (3)
- URL decodes the given string
- curl_easy_upkeep (3)
- Perform any connection upkeep checks.
- curl_escape (3)
- URL encodes the given string
- curl_formfree (3)
- free a previously build multipart form post chain
- curl_formget (3)
- serialize a previously built multipart form POST chain
- curl_free (3)
- reclaim memory that has been obtained through a libcur...
- curl_global_init_mem (3)
- Global libcurl initialization with memory callbacks
- curl_global_sslset (3)
- Select SSL backend to use with libcurl
- curl_mime_headers (3)
- set a mime part's custom headers
- curl_mime_init (3)
- create a mime handle
- curl_multi_add_handle (3)
- add an easy handle to a multi session
- curl_multi_assign (3)
- set data to associate with an internal socket
- curl_multi_fdset (3)
- extracts file descriptor information from a multi handle
- curl_multi_get_handles (3)
- returns all added easy handles
- curl_multi_init (3)
- create a multi handle
- curl_multi_perform (3)
- reads/writes available data from easy handles
- curl_multi_poll (3)
- polls on all easy handles in a multi handle
- curl_multi_remove_handle (3)
- remove an easy handle from a multi session
- curl_multi_setopt (3)
- set options for a curl multi handle
- curl_multi_timeout (3)
- how long to wait for action before proceeding
- curl_multi_wait (3)
- polls on all easy handles in a multi handle
- curl_pushheader_byname (3)
- get a push header by name
- curl_pushheader_bynum (3)
- get a push header by index
- curl_share_cleanup (3)
- Clean up a shared object
- curl_share_init (3)
- Create a shared object
- curl_share_setopt (3)
- Set options for a shared object
- curl_share_strerror (3)
- return string describing error code
- curl_unescape (3)
- URL decodes the given string
- curl_url (3)
- returns a new URL handle
- curl_url_cleanup (3)
- free the URL handle
- curl_url_dup (3)
- duplicate a URL handle
- curl_version (3)
- returns the libcurl version string
- CURLINFO_ACTIVESOCKET (3)
- get the active socket
- CURLINFO_APPCONNECT_TIME (3)
- get the time until the SSL/SSH handshake is co...
- CURLINFO_APPCONNECT_TIME_T (3)
- time until the SSL/SSH handshake completed
- CURLINFO_CAINFO (3)
- get the default built-in CA certificate path
- CURLINFO_CAPATH (3)
- get the default built-in CA path string
- CURLINFO_CERTINFO (3)
- get the TLS certificate chain
- CURLINFO_CONDITION_UNMET (3)
- get info on unmet time conditional or 304 HTTP...
- CURLINFO_CONN_ID (3)
- get the ID of the last connection used by the handle
- CURLINFO_CONNECT_TIME (3)
- get the time until connect
- CURLINFO_CONNECT_TIME_T (3)
- get the time until connect
- CURLINFO_CONTENT_LENGTH_DOWNLOAD (3)
- get content-length of download
- CURLINFO_CONTENT_LENGTH_DOWNLOAD_T (3)
- get content-length of download
- CURLINFO_CONTENT_LENGTH_UPLOAD (3)
- get the specified size of the upload
- CURLINFO_CONTENT_LENGTH_UPLOAD_T (3)
- get the specified size of the upload
- CURLINFO_EFFECTIVE_METHOD (3)
- get the last used HTTP method
- CURLINFO_EFFECTIVE_URL (3)
- get the last used URL
- CURLINFO_FILETIME (3)
- get the remote time of the retrieved document
- CURLINFO_FILETIME_T (3)
- get the remote time of the retrieved document
- CURLINFO_FTP_ENTRY_PATH (3)
- get entry path in FTP server
- CURLINFO_HEADER_SIZE (3)
- get size of retrieved headers
- CURLINFO_HTTP_CONNECTCODE (3)
- get the CONNECT response code
- CURLINFO_HTTP_VERSION (3)
- get the http version used in the connection
- CURLINFO_HTTPAUTH_AVAIL (3)
- get available HTTP authentication methods
- CURLINFO_LASTSOCKET (3)
- get the last socket used
- CURLINFO_LOCAL_PORT (3)
- get the latest local port number
- CURLINFO_NAMELOOKUP_TIME (3)
- get the name lookup time
- CURLINFO_NAMELOOKUP_TIME_T (3)
- get the name lookup time in microseconds
- CURLINFO_PRETRANSFER_TIME (3)
- get the time until the file transfer start
- CURLINFO_PRETRANSFER_TIME_T (3)
- get the time until the file transfer start
- CURLINFO_PRIMARY_PORT (3)
- get the latest destination port number
- CURLINFO_PRIVATE (3)
- get the private pointer
- CURLINFO_PROTOCOL (3)
- get the protocol used in the connection
- CURLINFO_PROXY_ERROR (3)
- get the detailed (SOCKS) proxy error
- CURLINFO_PROXY_SSL_VERIFYRESULT (3)
- get the result of the proxy certificate...
- CURLINFO_PROXYAUTH_AVAIL (3)
- get available HTTP proxy authentication methods
- CURLINFO_REDIRECT_COUNT (3)
- get the number of redirects
- CURLINFO_REDIRECT_TIME (3)
- get the time for all redirection steps
- CURLINFO_REDIRECT_TIME_T (3)
- get the time for all redirection steps
- CURLINFO_REDIRECT_URL (3)
- get the URL a redirect would go to
- CURLINFO_REFERER (3)
- get the referrer header
- CURLINFO_RESPONSE_CODE (3)
- get the last response code
- CURLINFO_RETRY_AFTER (3)
- returns the Retry-After retry delay
- CURLINFO_RTSP_CLIENT_CSEQ (3)
- get the next RTSP client CSeq
- CURLINFO_RTSP_CSEQ_RECV (3)
- get the recently received CSeq
- CURLINFO_RTSP_SERVER_CSEQ (3)
- get the next RTSP server CSeq
- CURLINFO_SCHEME (3)
- get the URL scheme (sometimes called protocol) used in...
- CURLINFO_SIZE_DOWNLOAD (3)
- get the number of downloaded bytes
- CURLINFO_SIZE_DOWNLOAD_T (3)
- get the number of downloaded bytes
- CURLINFO_SIZE_UPLOAD (3)
- get the number of uploaded bytes
- CURLINFO_SIZE_UPLOAD_T (3)
- get the number of uploaded bytes
- CURLINFO_SSL_VERIFYRESULT (3)
- get the result of the certificate verification
- CURLINFO_STARTTRANSFER_TIME (3)
- get the time until the first byte is received
- CURLINFO_STARTTRANSFER_TIME_T (3)
- get the time until the first byte is rece...
- CURLINFO_XFER_ID (3)
- get the ID of a transfer
- CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE (3)
- chunk length threshold for pipelining
- CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE (3)
- size threshold for pipelining penalty
- CURLMOPT_MAX_CONCURRENT_STREAMS (3)
- max concurrent streams for http2
- CURLMOPT_MAX_HOST_CONNECTIONS (3)
- max number of connections to a single host
- CURLMOPT_MAX_PIPELINE_LENGTH (3)
- maximum number of requests in a pipeline
- CURLMOPT_MAXCONNECTS (3)
- size of connection cache
- CURLMOPT_PIPELINING (3)
- enable HTTP pipelining and multiplexing
- CURLMOPT_PIPELINING_SITE_BL (3)
- pipelining host block list
- CURLMOPT_PUSHDATA (3)
- pointer to pass to push callback
- CURLMOPT_PUSHFUNCTION (3)
- callback that approves or denies server pushes
- CURLMOPT_SOCKETDATA (3)
- custom pointer passed to the socket callback
- CURLMOPT_SOCKETFUNCTION (3)
- callback informed about what to wait for
- CURLOPT_ACCEPT_ENCODING (3)
- automatic decompression of HTTP downloads
- CURLOPT_ALTSVC (3)
- alt-svc cache file name
- CURLOPT_ALTSVC_CTRL (3)
- control alt-svc behavior
- CURLOPT_APPEND (3)
- append to the remote file
- CURLOPT_AUTOREFERER (3)
- automatically update the referer header
- CURLOPT_CA_CACHE_TIMEOUT (3)
- life-time for cached certificate stores
- CURLOPT_CAINFO (3)
- path to Certificate Authority (CA) bundle
- CURLOPT_CAINFO_BLOB (3)
- Certificate Authority (CA) bundle in PEM format
- CURLOPT_CAPATH (3)
- directory holding CA certificates
- CURLOPT_CHUNK_BGN_FUNCTION (3)
- callback before a transfer with FTP wildcard...
- CURLOPT_CHUNK_DATA (3)
- pointer passed to the FTP chunk callbacks
- CURLOPT_CHUNK_END_FUNCTION (3)
- callback after a transfer with FTP wildcard ...
- CURLOPT_CLOSESOCKETDATA (3)
- pointer passed to the socket close callback
- CURLOPT_CONNECT_ONLY (3)
- stop when connected to target server
- CURLOPT_CONNECT_TO (3)
- connect to a specific host and port instead of the U...
- CURLOPT_CONNECTTIMEOUT (3)
- timeout for the connect phase
- CURLOPT_CONNECTTIMEOUT_MS (3)
- timeout for the connect phase
- CURLOPT_CONV_FROM_NETWORK_FUNCTION (3)
- convert data from network to host en...
- CURLOPT_CONV_FROM_UTF8_FUNCTION (3)
- convert data from UTF8 to host encoding
- CURLOPT_CONV_TO_NETWORK_FUNCTION (3)
- convert data to network from host enco...
- CURLOPT_COOKIE (3)
- HTTP Cookie header
- CURLOPT_COOKIELIST (3)
- add to or manipulate cookies held in memory
- CURLOPT_COPYPOSTFIELDS (3)
- have libcurl copy data to POST
- CURLOPT_CURLU (3)
- URL in URL handle format
- CURLOPT_CUSTOMREQUEST (3)
- custom request method
- CURLOPT_DEBUGDATA (3)
- pointer passed to the debug callback
- CURLOPT_DEFAULT_PROTOCOL (3)
- default protocol to use if the URL is missing ...
- CURLOPT_DISALLOW_USERNAME_IN_URL (3)
- disallow specifying username in the URL
- CURLOPT_DNS_CACHE_TIMEOUT (3)
- life-time for DNS cache entries
- CURLOPT_DNS_SHUFFLE_ADDRESSES (3)
- shuffle IP addresses for hostname
- CURLOPT_DNS_USE_GLOBAL_CACHE (3)
- global DNS cache
- CURLOPT_DOH_SSL_VERIFYHOST (3)
- verify the host name in the DoH SSL certificate
- CURLOPT_DOH_SSL_VERIFYPEER (3)
- verify the DoH SSL certificate
- CURLOPT_DOH_SSL_VERIFYSTATUS (3)
- verify the DoH SSL certificate's status
- CURLOPT_DOH_URL (3)
- provide the DNS-over-HTTPS URL
- CURLOPT_EGDSOCKET (3)
- EGD socket path
- CURLOPT_FAILONERROR (3)
- request failure on HTTP response >= 400
- CURLOPT_FILETIME (3)
- get the modification time of the remote resource
- CURLOPT_FNMATCH_DATA (3)
- pointer passed to the fnmatch callback
- CURLOPT_FNMATCH_FUNCTION (3)
- wildcard match callback
- CURLOPT_FOLLOWLOCATION (3)
- follow HTTP 3xx redirects
- CURLOPT_FRESH_CONNECT (3)
- force a new connection to be used
- CURLOPT_FTP_ALTERNATIVE_TO_USER (3)
- command to use instead of USER with FTP
- CURLOPT_FTP_FILEMETHOD (3)
- select directory traversing method for FTP
- CURLOPT_FTP_SKIP_PASV_IP (3)
- ignore the IP address in the PASV response
- CURLOPT_FTP_SSL_CCC (3)
- switch off SSL again with FTP after auth
- CURLOPT_FTPSSLAUTH (3)
- order in which to attempt TLS vs SSL
- CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS (3)
- head start for IPv6 for happy eyeballs
- CURLOPT_HAPROXY_CLIENT_IP (3)
- set HAProxy PROXY protocol client IP
- CURLOPT_HAPROXYPROTOCOL (3)
- send HAProxy PROXY protocol v1 header
- CURLOPT_HEADER (3)
- pass headers to the data stream
- CURLOPT_HEADERDATA (3)
- pointer to pass to header callback
- CURLOPT_HEADERFUNCTION (3)
- callback that receives header data
- CURLOPT_HEADEROPT (3)
- send HTTP headers to both proxy and host or separately
- CURLOPT_HSTS (3)
- HSTS cache file name
- CURLOPT_HSTS_CTRL (3)
- control HSTS behavior
- CURLOPT_HSTSREADDATA (3)
- pointer passed to the HSTS read callback
- CURLOPT_HSTSREADFUNCTION (3)
- read callback for HSTS hosts
- CURLOPT_HSTSWRITEDATA (3)
- pointer passed to the HSTS write callback
- CURLOPT_HSTSWRITEFUNCTION (3)
- write callback for HSTS hosts
- CURLOPT_HTTP09_ALLOWED (3)
- allow HTTP/0.9 response
- CURLOPT_HTTP200ALIASES (3)
- alternative matches for HTTP 200 OK
- CURLOPT_HTTP_CONTENT_DECODING (3)
- HTTP content decoding control
- CURLOPT_HTTP_TRANSFER_DECODING (3)
- HTTP transfer decoding control
- CURLOPT_HTTP_VERSION (3)
- HTTP protocol version to use
- CURLOPT_HTTPAUTH (3)
- HTTP server authentication methods to try
- CURLOPT_HTTPGET (3)
- ask for an HTTP GET request
- CURLOPT_HTTPHEADER (3)
- set of HTTP headers
- CURLOPT_HTTPPOST (3)
- multipart formpost content
- CURLOPT_HTTPPROXYTUNNEL (3)
- tunnel through HTTP proxy
- CURLOPT_IGNORE_CONTENT_LENGTH (3)
- ignore content length
- CURLOPT_INFILESIZE (3)
- size of the input file to send off
- CURLOPT_INFILESIZE_LARGE (3)
- size of the input file to send off
- CURLOPT_KEEP_SENDING_ON_ERROR (3)
- keep sending on early HTTP response >= 300
- CURLOPT_KEYPASSWD (3)
- passphrase to private key
- CURLOPT_MAIL_AUTH (3)
- SMTP authentication address
- CURLOPT_MAXCONNECTS (3)
- maximum connection cache size
- CURLOPT_NOBODY (3)
- do the download request without getting the body
- CURLOPT_NOPROGRESS (3)
- switch off the progress meter
- CURLOPT_NOPROXY (3)
- disable proxy use for specific hosts
- CURLOPT_NOSIGNAL (3)
- skip all signal handling
- CURLOPT_PASSWORD (3)
- password to use in authentication
- CURLOPT_PATH_AS_IS (3)
- do not handle dot dot sequences
- CURLOPT_POST (3)
- make an HTTP POST
- CURLOPT_POSTQUOTE (3)
- (S)FTP commands to run after the transfer
- CURLOPT_POSTREDIR (3)
- how to act on an HTTP POST redirect
- CURLOPT_PRE_PROXY (3)
- pre-proxy host to use
- CURLOPT_PREREQDATA (3)
- pointer passed to the pre-request callback
- CURLOPT_PREREQFUNCTION (3)
- user callback called when a connection has been ...
- CURLOPT_PROGRESSDATA (3)
- pointer passed to the progress callback
- CURLOPT_PROXY_CAINFO (3)
- path to proxy Certificate Authority (CA) bundle
- CURLOPT_PROXY_CAINFO_BLOB (3)
- proxy Certificate Authority (CA) bundle in PE...
- CURLOPT_PROXY_CAPATH (3)
- directory holding HTTPS proxy CA certificates
- CURLOPT_PROXY_CRLFILE (3)
- HTTPS proxy Certificate Revocation List file
- CURLOPT_PROXY_KEYPASSWD (3)
- passphrase for the proxy private key
- CURLOPT_PROXY_PINNEDPUBLICKEY (3)
- pinned public key for https proxy
- CURLOPT_PROXY_SERVICE_NAME (3)
- proxy authentication service name
- CURLOPT_PROXY_SSL_CIPHER_LIST (3)
- ciphers to use for HTTPS proxy
- CURLOPT_PROXY_SSL_OPTIONS (3)
- HTTPS proxy SSL behavior options
- CURLOPT_PROXY_SSL_VERIFYHOST (3)
- verify the proxy certificate's name agains...
- CURLOPT_PROXY_SSL_VERIFYPEER (3)
- verify the proxy's SSL certificate
- CURLOPT_PROXY_SSLCERT (3)
- HTTPS proxy client certificate
- CURLOPT_PROXY_SSLCERTTYPE (3)
- type of the proxy client SSL certificate
- CURLOPT_PROXY_SSLKEY (3)
- private key file for HTTPS proxy client cert
- CURLOPT_PROXY_SSLKEYTYPE (3)
- type of the proxy private key file
- CURLOPT_PROXY_SSLVERSION (3)
- preferred HTTPS proxy TLS version
- CURLOPT_PROXY_TLS13_CIPHERS (3)
- ciphers suites for proxy TLS 1.3
- CURLOPT_PROXY_TLSAUTH_PASSWORD (3)
- password to use for proxy TLS authentica...
- CURLOPT_PROXY_TLSAUTH_TYPE (3)
- HTTPS proxy TLS authentication methods
- CURLOPT_PROXY_TLSAUTH_USERNAME (3)
- user name to use for proxy TLS authentic...
- CURLOPT_PROXYAUTH (3)
- HTTP proxy authentication methods
- CURLOPT_PROXYHEADER (3)
- set of HTTP headers to pass to proxy
- CURLOPT_PROXYPASSWORD (3)
- password to use with proxy authentication
- CURLOPT_PROXYPORT (3)
- port number the proxy listens on
- CURLOPT_PROXYUSERNAME (3)
- user name to use for proxy authentication
- CURLOPT_PROXYUSERPWD (3)
- user name and password to use for proxy authentica...
- CURLOPT_PUT (3)
- make an HTTP PUT request
- CURLOPT_READDATA (3)
- pointer passed to the read callback
- CURLOPT_REFERER (3)
- the HTTP referer header
- CURLOPT_REQUEST_TARGET (3)
- alternative target for this request
- CURLOPT_RESOLVE (3)
- provide custom host name to IP address resolves
- CURLOPT_RESOLVER_START_DATA (3)
- pointer passed to the resolver start callback
- CURLOPT_RTSP_TRANSPORT (3)
- RTSP Transport: header
- CURLOPT_SASL_AUTHZID (3)
- authorization identity (identity to act as)
- CURLOPT_SEEKDATA (3)
- pointer passed to the seek callback
- CURLOPT_SERVICE_NAME (3)
- authentication service name
- CURLOPT_SHARE (3)
- share handle to use
- CURLOPT_SOCKS5_AUTH (3)
- methods for SOCKS5 proxy authentication
- CURLOPT_SOCKS5_GSSAPI_SERVICE (3)
- SOCKS5 proxy authentication service name
- CURLOPT_SSH_AUTH_TYPES (3)
- auth types for SFTP and SCP
- CURLOPT_SSH_COMPRESSION (3)
- enable SSH compression
- CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 (3)
- MD5 checksum of SSH server public key
- CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 (3)
- SHA256 hash of SSH server public key
- CURLOPT_SSH_HOSTKEYDATA (3)
- pointer to pass to the SSH host key callback
- CURLOPT_SSH_HOSTKEYFUNCTION (3)
- callback to check host key
- CURLOPT_SSH_KEYDATA (3)
- pointer passed to the SSH key callback
- CURLOPT_SSH_KEYFUNCTION (3)
- callback for known host matching logic
- CURLOPT_SSH_KNOWNHOSTS (3)
- file name holding the SSH known hosts
- CURLOPT_SSH_PRIVATE_KEYFILE (3)
- private key file for SSH auth
- CURLOPT_SSH_PUBLIC_KEYFILE (3)
- public key file for SSH auth
- CURLOPT_SSL_CIPHER_LIST (3)
- ciphers to use for TLS
- CURLOPT_SSL_EC_CURVES (3)
- key exchange curves
- CURLOPT_SSL_OPTIONS (3)
- SSL behavior options
- CURLOPT_SSL_SESSIONID_CACHE (3)
- use the SSL session-ID cache
- CURLOPT_SSL_VERIFYHOST (3)
- verify the certificate's name against host
- CURLOPT_SSL_VERIFYPEER (3)
- verify the peer's SSL certificate
- CURLOPT_SSL_VERIFYSTATUS (3)
- verify the certificate's status
- CURLOPT_SSLKEYTYPE (3)
- type of the private key file
- CURLOPT_STDERR (3)
- redirect stderr to another stream
- CURLOPT_STREAM_DEPENDS (3)
- stream this transfer depends on
- CURLOPT_STREAM_DEPENDS_E (3)
- stream this transfer depends on exclusively
- CURLOPT_STREAM_WEIGHT (3)
- numerical stream weight
- CURLOPT_SUPPRESS_CONNECT_HEADERS (3)
- suppress proxy CONNECT response header...
- CURLOPT_TCP_NODELAY (3)
- the TCP_NODELAY option
- CURLOPT_TIMEOUT (3)
- maximum time the transfer is allowed to complete
- CURLOPT_TIMEOUT_MS (3)
- maximum time the transfer is allowed to complete
- CURLOPT_TLS13_CIPHERS (3)
- ciphers suites to use for TLS 1.3
- CURLOPT_TLSAUTH_PASSWORD (3)
- password to use for TLS authentication
- CURLOPT_TLSAUTH_TYPE (3)
- TLS authentication methods
- CURLOPT_TLSAUTH_USERNAME (3)
- user name to use for TLS authentication
- CURLOPT_TRAILERDATA (3)
- pointer passed to trailing headers callback
- CURLOPT_TRAILERFUNCTION (3)
- callback for sending trailing headers
- CURLOPT_TRANSFER_ENCODING (3)
- ask for HTTP Transfer Encoding
- CURLOPT_UNIX_SOCKET_PATH (3)
- Unix domain socket
- CURLOPT_UNRESTRICTED_AUTH (3)
- send credentials to other hosts too
- CURLOPT_URL (3)
- URL for this transfer
- CURLOPT_USE_SSL (3)
- request using SSL / TLS for the transfer
- CURLOPT_USERAGENT (3)
- HTTP user-agent header
- CURLOPT_USERNAME (3)
- user name to use in authentication
- CURLOPT_USERPWD (3)
- user name and password to use in authentication
- CURLOPT_WILDCARDMATCH (3)
- directory wildcard transfers
- CURLOPT_WRITEDATA (3)
- pointer passed to the write callback
- CURLOPT_WS_OPTIONS (3)
- WebSocket behavior options
- CURLOPT_XFERINFODATA (3)
- pointer passed to the progress callback
- CURLOPT_XOAUTH2_BEARER (3)
- OAuth 2.0 access token
- CURLSHOPT_LOCKFUNC (3)
- mutex lock callback
- CURLSHOPT_SHARE (3)
- add data to share
- CURLSHOPT_UNLOCKFUNC (3)
- mutex unlock callback
- CURLSHOPT_UNSHARE (3)
- remove data to share
- CURLSHOPT_USERDATA (3)
- pointer passed to the lock and unlock mutex callbacks
- curses (3ncurses)
- CRT screen handling and optimization package
- curvescreenshots (3)
- .TH "curvescreenshots" 3 "Mon Aug 1 2011" "Version 5.2...
- custom_ext_add_cb (3osslssl-3)
- custom TLS extension handling
- custom_ext_free_cb (3osslssl-3)
- custom TLS extension handling
- custom_ext_parse_cb (3osslssl-3)
- custom TLS extension handling
- customizable_types (5)
- The SELinux customizable types configuration file
- cut (1)
- remove sections from each line of files
- cut (1p)
- cut out selected fields of each line of a file
- cvtbatch (8)
- Convert Usenet batch files to INN format
- Cwd (3)
- get pathname of current working directory
- cycbuff.conf (5)
- Configuration file for INN CNFS storage method
- Cyrus::IMAP::Shell (3)
- Perl version of cyradm
- Cyrus::SIEVE::managesieve (3)
- Perl client for the SIEVE protocol
- d2i_ASIdentifierChoice (3osslssl-3)
- convert objects from/to ASN.1/DER repre...
- d2i_AUTHORITY_INFO_ACCESS (3osslssl-3)
- convert objects from/to ASN.1/DER re...
- d2i_AUTHORITY_KEYID (3osslssl-3)
- convert objects from/to ASN.1/DER represen...
- d2i_DHparams (3osslssl-3)
- DEPRECATED
- d2i_DHparams_bio (3osslssl-3)
- DEPRECATED
- d2i_DHparams_fp (3osslssl-3)
- DEPRECATED
- d2i_DHxparams (3osslssl-3)
- convert objects from/to ASN.1/DER representation
- d2i_IPAddressChoice (3osslssl-3)
- convert objects from/to ASN.1/DER represen...
- d2i_NAMING_AUTHORITY (3osslssl-3)
- convert objects from/to ASN.1/DER represe...
- d2i_OSSL_CMP_PKIHEADER (3osslssl-3)
- convert objects from/to ASN.1/DER repre...
- d2i_OTHERNAME (3osslssl-3)
- convert objects from/to ASN.1/DER representation
- d_add (9)
- add dentry to hash queues
- d_add_ci (9)
- lookup or allocate new dentry with case-exact name
- d_add_unique (9)
- add dentry to hash queues without aliasing
- d_alloc (9)
- allocate a dcache entry
- d_hash_and_lookup (9)
- hash the qstr then search for a dentry
- d_lookup (9)
- search for a dentry
- d_materialise_unique (9)
- introduce an inode into the tree
- d_path (9)
- return the path of a dentry
- d_rehash (9)
- add an entry back to the hash
- d_splice_alias (9)
- splice a disconnected dentry into the tree if one exists
- d_unhashed (9)
- is dentry hashed
- daemon (3)
- run in the background
- dane_match_type_name (3)
- API function
- dangerball (6x)
- a 3D ball that periodically extrudes spikes. Ouch!
- daps (1)
- A complete environment to build HTML, PDF, EPUB and ot...
- Data::Dump::Filtered (3pm)
- Pretty printing with filtering
- Data::Dump::Trace (3pm)
- Helpers to trace function and method calls
- Data::Dumper (3)
- stringified perl data structures, suitable for both pr...
- data_ahead (3form)
- test for off-screen data in given forms
- data_behind (3form)
- test for off-screen data in given forms
- date (1)
- print or set the system date and time
- date (1p)
- write the date and time
- Date::Calc::Object (3pm)
- Object-oriented add-on for Date::Calc with overloa...
- Date::Calendar (3pm)
- Calendar objects for different holiday schemes
- Date::Manip::History (3)
- Twenty years and still going strong
- datefudge (1)
- pretend the system time is different
- DateTime::Conflicts (3)
- Check for conflicts between DateTime and installed ...
- DateTime::Locale::aa (3)
- Locale data examples for the Afar (aa) locale
- DateTime::Locale::aa_DJ (3)
- Locale data examples for the Afar Djibouti (aa-...
- DateTime::Locale::aa_ER (3)
- Locale data examples for the Afar Eritrea (aa-E...
- DateTime::Locale::aa_ET (3)
- Locale data examples for the Afar Ethiopia (aa-...
- DateTime::Locale::ab (3)
- Locale data examples for the Abkhazian (ab) locale
- DateTime::Locale::ab_GE (3)
- Locale data examples for the Abkhazian Georgia ...
- DateTime::Locale::an (3)
- Locale data examples for the Aragonese (an) locale
- DateTime::Locale::an_ES (3)
- Locale data examples for the Aragonese Spain (a...
- DateTime::Locale::apc_SY (3)
- Locale data examples for the Syria (apc-SY) lo...
- DateTime::Locale::arn (3)
- Locale data examples for the Mapuche (arn) locale
- DateTime::Locale::arn_CL (3)
- Locale data examples for the Mapuche Chile (ar...
- DateTime::Locale::az_Arab (3)
- Locale data examples for the Azerbaijani Arab...
- DateTime::Locale::az_Arab_IQ (3)
- Locale data examples for the Azerbaijani I...
- DateTime::Locale::az_Arab_IR (3)
- Locale data examples for the Azerbaijani I...
- DateTime::Locale::az_Arab_TR (3)
- Locale data examples for the Azerbaijani T...
- DateTime::Locale::ba (3)
- Locale data examples for the Bashkir (ba) locale
- DateTime::Locale::ba_RU (3)
- Locale data examples for the Bashkir Russia (ba...
- DateTime::Locale::bal (3)
- Locale data examples for the Baluchi (bal) locale
- DateTime::Locale::bal_Arab (3)
- Locale data examples for the Baluchi Arabic ...
- DateTime::Locale::bal_Arab_PK (3)
- Locale data examples for the Baluchi Paki...
- DateTime::Locale::bal_Latn (3)
- Locale data examples for the Baluchi Latin (...
- DateTime::Locale::bal_Latn_PK (3)
- Locale data examples for the Baluchi Paki...
- DateTime::Locale::bgn (3)
- Locale data examples for the Western Balochi (bgn...
- DateTime::Locale::bgn_AE (3)
- Locale data examples for the Western Balochi U...
- DateTime::Locale::bgn_AF (3)
- Locale data examples for the Western Balochi A...
- DateTime::Locale::bgn_IR (3)
- Locale data examples for the Western Balochi I...
- DateTime::Locale::bgn_OM (3)
- Locale data examples for the Western Balochi O...
- DateTime::Locale::bgn_PK (3)
- Locale data examples for the Western Balochi P...
- DateTime::Locale::blt (3)
- Locale data examples for the Tai Dam (blt) locale
- DateTime::Locale::blt_VN (3)
- Locale data examples for the Tai Dam Vietnam (...
- DateTime::Locale::bm_Nkoo (3)
- Locale data examples for the Bambara NKo (...
- DateTime::Locale::bm_Nkoo_ML (3)
- Locale data examples for the Bambara Mali ...
- DateTime::Locale::bss (3)
- Locale data examples for the Akoose (bss) locale
- DateTime::Locale::bss_CM (3)
- Locale data examples for the Akoose Cameroon (...
- DateTime::Locale::byn (3)
- Locale data examples for the Blin (byn) locale
- DateTime::Locale::byn_ER (3)
- Locale data examples for the Blin Eritrea (byn...
- DateTime::Locale::cad (3)
- Locale data examples for the Caddo (cad) locale
- DateTime::Locale::cad_US (3)
- Locale data examples for the Caddo United Stat...
- DateTime::Locale::cch (3)
- Locale data examples for the Atsam (cch) locale
- DateTime::Locale::cch_NG (3)
- Locale data examples for the Atsam Nigeria (cc...
- DateTime::Locale::cho (3)
- Locale data examples for the Choctaw (cho) locale
- DateTime::Locale::cho_US (3)
- Locale data examples for the Choctaw United St...
- DateTime::Locale::cic (3)
- Locale data examples for the Chickasaw (cic) locale
- DateTime::Locale::cic_US (3)
- Locale data examples for the Chickasaw United ...
- DateTime::Locale::co (3)
- Locale data examples for the Corsican (co) locale
- DateTime::Locale::co_FR (3)
- Locale data examples for the Corsican France (c...
- DateTime::Locale::Conflicts (3)
- Check for conflicts between DateTime::Local...
- DateTime::Locale::cu (3)
- Locale data examples for the Church Slavic (cu) lo...
- DateTime::Locale::cu_RU (3)
- Locale data examples for the Church Slavic Russ...
- DateTime::Locale::dv (3)
- Locale data examples for the Divehi (dv) locale
- DateTime::Locale::dv_MV (3)
- Locale data examples for the Divehi Maldives (d...
- DateTime::Locale::el_polyton (3)
- Locale data examples for the Greek Polyton...
- DateTime::Locale::en_Dsrt (3)
- Locale data examples for the English Deseret ...
- DateTime::Locale::en_Dsrt_US (3)
- Locale data examples for the English Unite...
- DateTime::Locale::en_Shaw (3)
- Locale data examples for the English Shavian ...
- DateTime::Locale::en_Shaw_GB (3)
- Locale data examples for the English Unite...
- DateTime::Locale::gaa (3)
- Locale data examples for the Ga (gaa) locale
- DateTime::Locale::gaa_GH (3)
- Locale data examples for the Ga Ghana (gaa-GH)...
- DateTime::Locale::gez (3)
- Locale data examples for the Geez (gez) locale
- DateTime::Locale::gez_ER (3)
- Locale data examples for the Geez Eritrea (gez...
- DateTime::Locale::gez_ET (3)
- Locale data examples for the Geez Ethiopia (ge...
- DateTime::Locale::gn (3)
- Locale data examples for the Guarani (gn) locale
- DateTime::Locale::gn_PY (3)
- Locale data examples for the Guarani Paraguay (...
- DateTime::Locale::ha_Arab (3)
- Locale data examples for the Hausa Arabic (ha...
- DateTime::Locale::ha_Arab_NG (3)
- Locale data examples for the Hausa Nigeria...
- DateTime::Locale::ha_Arab_SD (3)
- Locale data examples for the Hausa Sudan A...
- DateTime::Locale::hnj (3)
- Locale data examples for the Hmong Njua (hnj) locale
- DateTime::Locale::hnj_Hmnp (3)
- Locale data examples for the Hmong Njua Nyia...
- DateTime::Locale::hnj_Hmnp_US (3)
- Locale data examples for the Hmong Njua U...
- DateTime::Locale::io (3)
- Locale data examples for the Ido (io) locale
- DateTime::Locale::io_001 (3)
- Locale data examples for the Ido world (io-001...
- DateTime::Locale::iu (3)
- Locale data examples for the Inuktitut (iu) locale
- DateTime::Locale::iu_CA (3)
- Locale data examples for the Inuktitut Canada (...
- DateTime::Locale::iu_Latn (3)
- Locale data examples for the Inuktitut Latin ...
- DateTime::Locale::iu_Latn_CA (3)
- Locale data examples for the Inuktitut Can...
- DateTime::Locale::jbo (3)
- Locale data examples for the Lojban (jbo) locale
- DateTime::Locale::jbo_001 (3)
- Locale data examples for the Lojban world (jb...
- DateTime::Locale::kaj (3)
- Locale data examples for the Jju (kaj) locale
- DateTime::Locale::kaj_NG (3)
- Locale data examples for the Jju Nigeria (kaj-...
- DateTime::Locale::kcg (3)
- Locale data examples for the Tyap (kcg) locale
- DateTime::Locale::kcg_NG (3)
- Locale data examples for the Tyap Nigeria (kcg...
- DateTime::Locale::ken (3)
- Locale data examples for the Kenyang (ken) locale
- DateTime::Locale::ken_CM (3)
- Locale data examples for the Kenyang Cameroon ...
- DateTime::Locale::kpe (3)
- Locale data examples for the Kpelle (kpe) locale
- DateTime::Locale::kpe_GN (3)
- Locale data examples for the Kpelle Guinea (kp...
- DateTime::Locale::kpe_LR (3)
- Locale data examples for the Kpelle Liberia (k...
- DateTime::Locale::la (3)
- Locale data examples for the Latin (la) locale
- DateTime::Locale::la_VA (3)
- Locale data examples for the Latin Vatican City...
- DateTime::Locale::lij (3)
- Locale data examples for the Ligurian (lij) locale
- DateTime::Locale::lij_IT (3)
- Locale data examples for the Ligurian Italy (l...
- DateTime::Locale::lmo (3)
- Locale data examples for the Lombard (lmo) locale
- DateTime::Locale::lmo_IT (3)
- Locale data examples for the Lombard Italy (lm...
- DateTime::Locale::mn_Mong (3)
- Locale data examples for the Mongolian Mongol...
- DateTime::Locale::mn_Mong_CN (3)
- Locale data examples for the Mongolian Chi...
- DateTime::Locale::mn_Mong_MN (3)
- Locale data examples for the Mongolian Mon...
- DateTime::Locale::mni_Mtei (3)
- Locale data examples for the Manipuri Meitei...
- DateTime::Locale::mni_Mtei_IN (3)
- Locale data examples for the Manipuri Ind...
- DateTime::Locale::moh (3)
- Locale data examples for the Mohawk (moh) locale
- DateTime::Locale::moh_CA (3)
- Locale data examples for the Mohawk Canada (mo...
- DateTime::Locale::ms_Arab (3)
- Locale data examples for the Malay Arabic (ms...
- DateTime::Locale::ms_Arab_BN (3)
- Locale data examples for the Malay Brunei ...
- DateTime::Locale::ms_Arab_MY (3)
- Locale data examples for the Malay Malaysi...
- DateTime::Locale::mus (3)
- Locale data examples for the Muscogee (mus) locale
- DateTime::Locale::mus_US (3)
- Locale data examples for the Muscogee United S...
- DateTime::Locale::myv (3)
- Locale data examples for the Erzya (myv) locale
- DateTime::Locale::myv_RU (3)
- Locale data examples for the Erzya Russia (myv...
- DateTime::Locale::nqo (3)
- Locale data examples for the NKo (nqo) locale
- DateTime::Locale::nqo_GN (3)
- Locale data examples for the NKo Guinea (nq...
- DateTime::Locale::nr (3)
- Locale data examples for the South Ndebele (nr) lo...
- DateTime::Locale::nr_ZA (3)
- Locale data examples for the South Ndebele Sout...
- DateTime::Locale::nso (3)
- Locale data examples for the Northern Sotho (nso)...
- DateTime::Locale::nso_ZA (3)
- Locale data examples for the Northern Sotho So...
- DateTime::Locale::nv (3)
- Locale data examples for the Navajo (nv) locale
- DateTime::Locale::nv_US (3)
- Locale data examples for the Navajo United Stat...
- DateTime::Locale::ny (3)
- Locale data examples for the Nyanja (ny) locale
- DateTime::Locale::ny_MW (3)
- Locale data examples for the Nyanja Malawi (ny-...
- DateTime::Locale::osa (3)
- Locale data examples for the Osage (osa) locale
- DateTime::Locale::osa_US (3)
- Locale data examples for the Osage United Stat...
- DateTime::Locale::pap (3)
- Locale data examples for the Papiamento (pap) locale
- DateTime::Locale::pap_AW (3)
- Locale data examples for the Papiamento Aruba ...
- DateTime::Locale::pap_CW (3)
- Locale data examples for the Papiamento Cura...
- DateTime::Locale::prg (3)
- Locale data examples for the Prussian (prg) locale
- DateTime::Locale::prg_001 (3)
- Locale data examples for the Prussian world (...
- DateTime::Locale::quc (3)
- Locale data examples for the Kiche (quc) locale
- DateTime::Locale::quc_GT (3)
- Locale data examples for the Kiche Guatema...
- DateTime::Locale::rhg (3)
- Locale data examples for the Rohingya (rhg) locale
- DateTime::Locale::rhg_Rohg (3)
- Locale data examples for the Rohingya Hanifi...
- DateTime::Locale::rhg_Rohg_BD (3)
- Locale data examples for the Rohingya Ban...
- DateTime::Locale::rhg_Rohg_MM (3)
- Locale data examples for the Rohingya Mya...
- DateTime::Locale::rif (3)
- Locale data examples for the Riffian (rif) locale
- DateTime::Locale::rif_MA (3)
- Locale data examples for the Riffian Morocco (...
- DateTime::Locale::sat_Deva (3)
- Locale data examples for the Santali Devanag...
- DateTime::Locale::sat_Deva_IN (3)
- Locale data examples for the Santali Indi...
- DateTime::Locale::scn (3)
- Locale data examples for the Sicilian (scn) locale
- DateTime::Locale::scn_IT (3)
- Locale data examples for the Sicilian Italy (s...
- DateTime::Locale::sdh (3)
- Locale data examples for the Southern Kurdish (sd...
- DateTime::Locale::sdh_IQ (3)
- Locale data examples for the Southern Kurdish ...
- DateTime::Locale::sdh_IR (3)
- Locale data examples for the Southern Kurdish ...
- DateTime::Locale::shn (3)
- Locale data examples for the Shan (shn) locale
- DateTime::Locale::shn_MM (3)
- Locale data examples for the Shan Myanmar (Bur...
- DateTime::Locale::shn_TH (3)
- Locale data examples for the Shan Thailand (sh...
- DateTime::Locale::sid (3)
- Locale data examples for the Sidamo (sid) locale
- DateTime::Locale::sid_ET (3)
- Locale data examples for the Sidamo Ethiopia (...
- DateTime::Locale::sma (3)
- Locale data examples for the Southern Sami (sma) ...
- DateTime::Locale::sma_NO (3)
- Locale data examples for the Southern Sami Nor...
- DateTime::Locale::sma_SE (3)
- Locale data examples for the Southern Sami Swe...
- DateTime::Locale::smj (3)
- Locale data examples for the Lule Sami (smj) locale
- DateTime::Locale::smj_NO (3)
- Locale data examples for the Lule Sami Norway ...
- DateTime::Locale::smj_SE (3)
- Locale data examples for the Lule Sami Sweden ...
- DateTime::Locale::ss (3)
- Locale data examples for the Swati (ss) locale
- DateTime::Locale::ss_SZ (3)
- Locale data examples for the Swati Eswatini (ss...
- DateTime::Locale::ss_ZA (3)
- Locale data examples for the Swati South Africa...
- DateTime::Locale::ssy (3)
- Locale data examples for the Saho (ssy) locale
- DateTime::Locale::ssy_ER (3)
- Locale data examples for the Saho Eritrea (ssy...
- DateTime::Locale::st (3)
- Locale data examples for the Southern Sotho (st) l...
- DateTime::Locale::st_LS (3)
- Locale data examples for the Southern Sotho Les...
- DateTime::Locale::st_ZA (3)
- Locale data examples for the Southern Sotho Sou...
- DateTime::Locale::syr (3)
- Locale data examples for the Syriac (syr) locale
- DateTime::Locale::syr_IQ (3)
- Locale data examples for the Syriac Iraq (syr-...
- DateTime::Locale::syr_SY (3)
- Locale data examples for the Syriac Syria (syr...
- DateTime::Locale::szl (3)
- Locale data examples for the Silesian (szl) locale
- DateTime::Locale::szl_PL (3)
- Locale data examples for the Silesian Poland (...
- DateTime::Locale::tig (3)
- Locale data examples for the Tigre (tig) locale
- DateTime::Locale::tig_ER (3)
- Locale data examples for the Tigre Eritrea (ti...
- DateTime::Locale::tn (3)
- Locale data examples for the Tswana (tn) locale
- DateTime::Locale::tn_BW (3)
- Locale data examples for the Tswana Botswana (t...
- DateTime::Locale::tn_ZA (3)
- Locale data examples for the Tswana South Afric...
- DateTime::Locale::tpi (3)
- Locale data examples for the Tok Pisin (tpi) locale
- DateTime::Locale::tpi_PG (3)
- Locale data examples for the Tok Pisin Papua N...
- DateTime::Locale::trv (3)
- Locale data examples for the Taroko (trv) locale
- DateTime::Locale::trv_TW (3)
- Locale data examples for the Taroko Taiwan (tr...
- DateTime::Locale::trw (3)
- Locale data examples for the Torwali (trw) locale
- DateTime::Locale::trw_PK (3)
- Locale data examples for the Torwali Pakistan ...
- DateTime::Locale::ts (3)
- Locale data examples for the Tsonga (ts) locale
- DateTime::Locale::ts_ZA (3)
- Locale data examples for the Tsonga South Afric...
- DateTime::Locale::ve (3)
- Locale data examples for the Venda (ve) locale
- DateTime::Locale::ve_ZA (3)
- Locale data examples for the Venda South Africa...
- DateTime::Locale::vec (3)
- Locale data examples for the Venetian (vec) locale
- DateTime::Locale::vec_IT (3)
- Locale data examples for the Venetian Italy (v...
- DateTime::Locale::vo (3)
- Locale data examples for the Volapk (vo) locale
- DateTime::Locale::vo_001 (3)
- Locale data examples for the Volapk world (v...
- DateTime::Locale::wa (3)
- Locale data examples for the Walloon (wa) locale
- DateTime::Locale::wa_BE (3)
- Locale data examples for the Walloon Belgium (w...
- DateTime::Locale::wal (3)
- Locale data examples for the Wolaytta (wal) locale
- DateTime::Locale::wal_ET (3)
- Locale data examples for the Wolaytta Ethiopia...
- DateTime::Locale::wbp (3)
- Locale data examples for the Warlpiri (wbp) locale
- DateTime::Locale::wbp_AU (3)
- Locale data examples for the Warlpiri Australi...
- daylight (3)
- initialize time conversion information
- daylight (3p)
- daylight savings time flag
- db (3)
- database access methods
- DBD::MariaDB (3)
- MariaDB and MySQL driver for the Perl5 Database Interf...
- DBD::MariaDB::INSTALL (3)
- How to install and configure DBD::MariaDB
- DBD::mysql (3)
- MariaDB and MySQL driver for the Perl5 Database Interf...
- DBD::mysql::INSTALL (3)
- How to install and configure DBD::mysql
- dbiproxy (1)
- A proxy server for the DBD::Proxy driver
- dblink_cancel_query (3pg161)
- cancels any active query on the named connection
- dblink_error_message (3pg161)
- gets last error message on the named connection
- dblink_fetch (3pg161)
- returns rows from an open cursor in a remote database
- dblink_get_connections (3pg161)
- returns the names of all open named dblink ...
- dblink_get_pkey (3pg161)
- returns the positions and field names of a relatio...
- dblink_is_busy (3pg161)
- checks if connection is busy with an async query
- dbmmanage (1)
- Manage user authentication files in DBM format
- dbopen (3)
- database access methods
- dbus-launch (1)
- Utility to start a message bus from a shell script
- dbwrap_tool (1)
- low level TDB/CTDB manipulation tool using the dbwrap ...
- dcngettext (3)
- translate message and choose plural form
- dconf-service (1)
- D-Bus service for writes to the dconf database
- ddbugtopbm (1)
- convert Diddle or DiddleBug sketches to PBM files
- dde (n)
- Execute a Dynamic Data Exchange command
- debinhex.pl (1)
- use Convert::BinHex to decode BinHex files
- debug_object_activate (9)
- debug checks when an object is activated
- debug_object_active_state (9)
- debug checks object usage state machine
- debug_object_assert_init (9)
- debug checks when object should be init-ed
- debug_object_deactivate (9)
- debug checks when an object is deactivated
- debug_object_destroy (9)
- debug checks when an object is destroyed
- debug_object_free (9)
- debug checks when an object is freed
- debug_object_init (9)
- debug checks when an object is initialized
- debug_object_init_on_stack (9)
- debug checks when an object on stack is init...
- debugfs_create_atomic_t (9)
- create a debugfs file that is used to read and ...
- debugfs_create_blob (9)
- create a debugfs file that is used to read a binary...
- debugfs_create_bool (9)
- create a debugfs file that is used to read and writ...
- debugfs_create_dir (9)
- create a directory in the debugfs filesystem
- debugfs_create_file (9)
- create a file in the debugfs filesystem
- debugfs_create_regset32 (9)
- create a debugfs file that returns register values
- debugfs_create_size_t (9)
- create a debugfs file that is used to read and wr...
- debugfs_create_symlink (9)
- create a symbolic link in the debugfs filesystem
- debugfs_create_u16 (9)
- create a debugfs file that is used to read and write...
- debugfs_create_u32 (9)
- create a debugfs file that is used to read and write...
- debugfs_create_u32_array (9)
- create a debugfs file that is used to read u32...
- debugfs_create_u64 (9)
- create a debugfs file that is used to read and write...
- debugfs_create_u8 (9)
- create a debugfs file that is used to read and write ...
- debugfs_create_x16 (9)
- create a debugfs file that is used to read and write...
- debugfs_create_x32 (9)
- create a debugfs file that is used to read and write...
- debugfs_create_x64 (9)
- create a debugfs file that is used to read and write...
- debugfs_create_x8 (9)
- create a debugfs file that is used to read and write ...
- debugfs_initialized (9)
- Tells whether debugfs has been registered
- debugfs_remove (9)
- removes a file or directory from the debugfs filesystem
- debugfs_rename (9)
- rename a file/directory in the debugfs filesystem
- debuginfod_add_http_header (3)
- request debuginfo from debuginfod
- DECLARE_LHASH_OF (3osslssl-3)
- dynamic hash table
- decode.h (3)
- API for Brotli decompression.
- decode_rs16 (9)
- Decode codeword (16bit data width)
- decode_rs8 (9)
- Decode codeword (8bit data width)
- Mail::SpamAssassin::Plugin::DecodeSho... (3)
- Check for shortened URLs
- def_shell_mode (3ncurses)
- low-level curses routines
- def_shell_mode_sp (3ncurses)
- curses screen-pointer extension
- default_contexts (5)
- The SELinux default contexts configuration file
- default_type (5)
- The SELinux default type configuration file
- DefaultDepth (3)
- Display macros and functions
- DefaultDepthOfScreen (3)
- screen information functions and macros
- defaultdomain (5)
- file which contains the NIS/YP domain name
- defined (3)
- a library for working with MaxMind DB files
- deghosting_mask (1)
- Creates mask for removing ghosting in images
- dehtmldiff (1)
- get usable diff from an HTML page
- dehumanize_number (3bsd)
- format a number into a human readable form and vic...
- del_timer_sync (9)
- deactivate a timer and wait for the handler to finish.
- delch (3ncurses)
- delete character under the cursor in a curses window
- deleg_method (n)
- Creation of comm delegates (snit methods)
- delete (n)
- delete things in the interpreter
- delete_from_page_cache (9)
- delete page from page cache
- delpart (8)
- simple wrapper around the "del partition" ioctl
- delta (1p)
- make a delta (change) to an SCCS file (DEVELOPMENT)
- dentry_update_name_case (9)
- update case insensitive dentry with a new name
- deprecate (3)
- Perl pragma for deprecating the inclusion of a module ...
- deprecated (3)
- .TH "deprecated" 3 "Mon Aug 1 2011" "Version 5.2.2" "Q...
- des (n)
- Implementation of the DES and triple-DES ciphers
- DES_key_sched (3osslssl-3)
- DES encryption
- des_modes (7osslssl-3)
- the variants of DES and other crypto algorithms of O...
- DES_set_key_checked (3osslssl-3)
- DES encryption
- DES_set_key_unchecked (3osslssl-3)
- DES encryption
- destroy_rcu_head_on_stack (9)
- destroy on-stack rcu_head for debugobjects
- dev_add_offload (9)
- register offload handlers
- dev_add_pack (9)
- add packet handler
- dev_change_carrier (9)
- Change device carrier
- dev_change_flags (9)
- change device settings
- dev_change_net_namespace (9)
- move device to different nethost namespace
- dev_close (9)
- shutdown an interface.
- dev_forward_skb (9)
- loopback an skb to another netif
- dev_get_by_flags_rcu (9)
- find any device with given flags
- dev_get_phys_port_id (9)
- Get device physical port ID
- dev_getbyhwaddr_rcu (9)
- find a device by its hardware address
- dev_hold (9)
- get reference to device
- dev_remove_offload (9)
- remove packet offload handler
- dev_remove_pack (9)
- remove packet handler
- dev_set_group (9)
- Change group this device belongs to
- dev_set_mac_address (9)
- Change Media Access Control Address
- dev_set_mtu (9)
- Change maximum transfer unit
- dev_valid_name (9)
- check if name is okay for network device
- Devel::Autoflush (3pm)
- Set autoflush from the command line
- Devel::Peek (3)
- A data debugging tool for the XS programmer
- device_add (9)
- add device to device hierarchy.
- device_attach (9)
- try to attach device to a driver.
- device_create (9)
- creates a device and registers it with sysfs
- device_create_vargs (9)
- creates a device and registers it with sysfs
- device_create_with_groups (9)
- creates a device and registers it with sysfs
- device_destroy (9)
- removes a device that was created with device_create
- device_find_child (9)
- device iterator for locating a particular device.
- device_for_each_child (9)
- device child iterator.
- device_register (9)
- register a device with the system.
- device_release_driver (9)
- manually detach device from driver.
- device_remove_file_self (9)
- remove sysfs attribute file from its own method.
- devres_for_each_res (9)
- Resource iterator
- dftest (1)
- Shows display filter byte-code, for debugging dfilter ...
- dga (1)
- test program for the XFree86-DGA extension
- dgn_comp (6)
- NetHack dungeon compiler
- DH_bits (3osslssl-3)
- get Diffie-Hellman prime size and security bits
- DH_check (3osslssl-3)
- generate and check Diffie-Hellman parameters
- DH_check_ex (3osslssl-3)
- generate and check Diffie-Hellman parameters
- DH_check_params (3osslssl-3)
- generate and check Diffie-Hellman parameters
- DH_check_params_ex (3osslssl-3)
- generate and check Diffie-Hellman parameters
- DH_check_pub_key_ex (3osslssl-3)
- generate and check Diffie-Hellman parameters
- DH_clear_flags (3osslssl-3)
- Routines for getting and setting data in a DH o...
- DH_compute_key (3osslssl-3)
- perform Diffie-Hellman key exchange
- DH_compute_key_padded (3osslssl-3)
- perform Diffie-Hellman key exchange
- DH_free (3osslssl-3)
- allocate and free DH objects
- DH_generate_key (3osslssl-3)
- perform Diffie-Hellman key exchange
- DH_generate_parameters (3osslssl-3)
- generate and check Diffie-Hellman param...
- DH_generate_parameters_ex (3osslssl-3)
- generate and check Diffie-Hellman pa...
- DH_get0_engine (3osslssl-3)
- Routines for getting and setting data in a DH o...
- DH_get0_g (3osslssl-3)
- Routines for getting and setting data in a DH object
- DH_get0_key (3osslssl-3)
- Routines for getting and setting data in a DH object
- DH_get0_p (3osslssl-3)
- Routines for getting and setting data in a DH object
- DH_get0_pqg (3osslssl-3)
- Routines for getting and setting data in a DH object
- DH_get0_priv_key (3osslssl-3)
- Routines for getting and setting data in a DH...
- DH_get0_pub_key (3osslssl-3)
- Routines for getting and setting data in a DH ...
- DH_get0_q (3osslssl-3)
- Routines for getting and setting data in a DH object
- DH_get_1024_160 (3osslssl-3)
- Create standardized public primes or DH pairs
- DH_get_2048_224 (3osslssl-3)
- Create standardized public primes or DH pairs
- DH_get_2048_256 (3osslssl-3)
- Create standardized public primes or DH pairs
- DH_get_default_method (3osslssl-3)
- select DH method
- DH_get_ex_data (3osslssl-3)
- application-specific data
- DH_get_ex_new_index (3osslssl-3)
- application-specific data
- DH_get_length (3osslssl-3)
- Routines for getting and setting data in a DH ob...
- DH_get_nid (3osslssl-3)
- create or get DH named parameters
- DH_meth_dup (3osslssl-3)
- Routines to build up DH methods
- DH_meth_free (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get0_app_data (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get0_name (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get_bn_mod_exp (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get_compute_key (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get_finish (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get_flags (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get_generate_key (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get_generate_params (3osslssl-3)
- Routines to build up DH methods
- DH_meth_get_init (3osslssl-3)
- Routines to build up DH methods
- DH_meth_new (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set0_app_data (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set1_name (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set_bn_mod_exp (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set_compute_key (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set_finish (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set_flags (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set_generate_key (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set_generate_params (3osslssl-3)
- Routines to build up DH methods
- DH_meth_set_init (3osslssl-3)
- Routines to build up DH methods
- DH_new (3osslssl-3)
- allocate and free DH objects
- DH_new_by_nid (3osslssl-3)
- create or get DH named parameters
- DH_new_method (3osslssl-3)
- select DH method
- DH_OpenSSL (3osslssl-3)
- select DH method
- DH_security_bits (3osslssl-3)
- get Diffie-Hellman prime size and security bits
- DH_set0_key (3osslssl-3)
- Routines for getting and setting data in a DH object
- DH_set0_pqg (3osslssl-3)
- Routines for getting and setting data in a DH object
- DH_set_default_method (3osslssl-3)
- select DH method
- DH_set_ex_data (3osslssl-3)
- application-specific data
- DH_set_flags (3osslssl-3)
- Routines for getting and setting data in a DH object
- DH_set_length (3osslssl-3)
- Routines for getting and setting data in a DH ob...
- DH_set_method (3osslssl-3)
- select DH method
- DH_size (3osslssl-3)
- get Diffie-Hellman prime size and security bits
- DH_test_flags (3osslssl-3)
- Routines for getting and setting data in a DH ob...
- dhclient (8)
- Dynamic Host Configuration Protocol Client
- dhclient-script (8)
- DHCP client network configuration script
- dhclient.conf (5)
- DHCP client configuration file
- dhclient.leases (5)
- DHCP client lease database
- dhcp-eval (5)
- ISC DHCP conditional evaluation
- dhcp-options (5)
- Dynamic Host Configuration Protocol options
- dhcpcd (8)
- an RFC 2131 compliant DHCP client
- dhcpd (8)
- Dynamic Host Configuration Protocol Server
- dhcpd.conf (5)
- dhcpd configuration file
- dhcpd.leases (5)
- DHCP client lease database
- dhcpdump (1)
- DHCP packet dumper
- dhcping (8)
- send a DHCP request to DHCP server to see if it's up a...
- dhcrelay (8)
- Dynamic Host Configuration Protocol Relay Agent
- dhparam (1osslssl-3)
- OpenSSL application commands
- DHparams_print (3osslssl-3)
- print cryptographic parameters
- DHparams_print_fp (3osslssl-3)
- print cryptographic parameters
- dialog (1)
- display dialog boxes from shell scripts
- diff-jars (1)
- output the differences between two JAR files
- diff3 (1)
- compare three files line by line
- diffpp (1)
- pretty-print diff outputs with GNU enscript
- diffstat (1)
- make histogram from diff-output
- difftime (3p)
- compute the difference between two calendar time values
- Digest (3)
- Modules that calculate message digests
- Digest::MD4 (3pm)
- Perl interface to the MD4 Algorithm
- digest_file_auth (8)
- File based digest authentication helper for Squid.
- digitaglinktree (1)
- Export tag structure of photos in digikam to the files...
- dirent.h (0p)
- format of directory entries
- dirfd (3p)
- extract the file descriptor used by a DIR stream
- dirfile-encoding (5)
- dirfile database encoding schemes
- dirfile-format (5)
- the dirfile database format specification file
- DirHandle (3)
- (obsolete) supply object methods for directory handles
- dirname (1p)
- return the directory portion of a pathname
- dirname (3)
- parse pathname components
- dirname (3p)
- report the parent directory name of a file pathname
- dirsplit (1)
- splits directory into multiple with equal size
- disable_cmf (9)
- switch off the channel measurement for a specific device
- disable_irq_nosync (9)
- disable an irq without waiting
- disk_block_events (9)
- block and flush disk event checking
- disk_clear_events (9)
- synchronously check, clear and return pending events
- disk_flush_events (9)
- schedule immediate event checking and flushing
- disk_part_iter_exit (9)
- finish up partition iteration
- disk_part_iter_next (9)
- proceed iterator to the next partition and return it
- disk_unblock_events (9)
- unblock disk event checking
- DisplayHeight (3)
- image format functions and macros
- DisplayHeightMM (3)
- image format functions and macros
- DisplayWidth (3)
- image format functions and macros
- DisplayWidthMM (3)
- image format functions and macros
- distort (6x)
- distort the content of the screen in interesting ways
- distrib.pats (5)
- Default values for the Distribution: header
- distributions (5)
- Recommended values for the Distribution: header
- div (3p)
- compute the quotient and remainder of an integer division
- dl_iterate_phdr (3)
- walk through list of shared objects
- dlb (6)
- NetHack data librarian
- dlclose (3p)
- close a symbol table handle
- dlfcn.h (0p)
- dynamic linking
- dlls (1ast)
- list dlls and shared libraries on $PATH
- dlopen (3p)
- open a symbol table handle
- dlsym (3p)
- get the address of a symbol from a symbol table handle
- dm_date (1)
- print out the system date and time
- dma_alloc_from_coherent (9)
- try to allocate memory from the per-device cohe...
- dma_buf_attach (9)
- Add the device to dma_buf's attachments list; optional...
- dma_buf_detach (9)
- Remove the given attachment from dmabuf's attachments ...
- dma_buf_end_cpu_access (9)
- Must be called after accessing a dma_buf from th...
- dma_buf_fd (9)
- returns a file descriptor for the given dma_buf
- dma_buf_get (9)
- returns the dma_buf structure related to an fd
- dma_buf_kmap (9)
- Map a page of the buffer object into kernel address sp...
- dma_buf_kmap_atomic (9)
- Map a page of the buffer object into kernel address...
- dma_buf_map_attachment (9)
- Returns the scatterlist table of the attachment;...
- dma_buf_mmap (9)
- Setup up a userspace mmap with the given vma
- dma_buf_put (9)
- decreases refcount of the buffer
- dma_buf_unmap_attachment (9)
- unmaps and decreases usecount of the buffer;mi...
- dma_buf_vmap (9)
- Create virtual mapping for the buffer object into kern...
- dma_mmap_from_coherent (9)
- try to mmap the memory allocated from per-device...
- dma_release_from_coherent (9)
- try to free the memory allocated from per-dev...
- dmam_alloc_coherent (9)
- Managed dma_alloc_coherent
- dmam_alloc_noncoherent (9)
- Managed dma_alloc_non_coherent
- dmam_declare_coherent_memory (9)
- Managed dma_declare_coherent_memory
- dmam_free_coherent (9)
- Managed dma_free_coherent
- dmam_free_noncoherent (9)
- Managed dma_free_noncoherent
- dmarc_http_client (1)
- (unknown subject)
- dmarc_httpd (1)
- (unknown subject)
- dmesg (1)
- print or control the kernel ring buffer
- dmi_check_system (9)
- check system DMI data
- dmi_first_match (9)
- find dmi_system_id structure matching system DMI data
- dmi_match (9)
- compare a string to the dmi field (if exists)
- dmi_name_in_vendors (9)
- Check if string is in the DMI system or board vendo...
- dmi_walk (9)
- Walk the DMI table and get called back for every record
- DMX (3)
- X Window System DMX (Distributed Multihead X) extension
- DMXAddInput (3)
- attach a new input
- DMXAddScreen (3)
- attach a new back-end screen
- DMXChangeDesktopAttributes (3)
- change global bounding box
- DMXChangeScreensAttributes (3)
- change back-end screen attributes
- DMXRemoveInput (3)
- detach an input
- DMXRemoveScreen (3)
- detach a back-end screen
- DMXSync (3)
- flush protocol requests between Xdmx and back-end X se...
- dngettext (3)
- translate message and choose plural form
- dnsblog (8)
- Postfix DNS white/blacklist logger
- dnsdomainname (1)
- show the system's DNS domain name
- dnsmasq (8)
- A lightweight DHCP and caching DNS server.
- dnssec-cds (1)
- change DS records for a child zone based on CDS/CDNSKEY
- dnssec-importkey (1)
- import DNSKEY records from external systems so they ca...
- dnssec-revoke (1)
- set the REVOKED bit on a DNSSEC key
- dnssec-settime (1)
- set the key timing metadata for a DNSSEC key
- do_notify_parent_cldstop (9)
- notify parent of stopped/continued state change
- do_pata_set_dmamode (9)
- Initialize host controller PATA PIO timings
- do_signal_stop (9)
- handle group stop for SIGSTOP and other stop signals
- do_sigtimedwait (9)
- wait for queued signals specified in which
- docheckgroups (8)
- Process checkgroups and output a list of changes
- docker-attach (1)
- Attach to a running container
- docker-build (1)
- Build a new image from the source code at PATH
- docker-commit (1)
- Create a new image from a container's changes
- docker-cp (1)
- Copy files/folders between a container and the local f...
- docker-diff (1)
- Inspect changes on a container's filesystem
- docker-events (1)
- Get real time events from the server
- docker-export (1)
- Export the contents of a container's filesystem as a t...
- docker-history (1)
- Show the history of an image
- docker-import (1)
- Create an empty filesystem image and import the conten...
- docker-load (1)
- Load an image from a tar archive or STDIN
- docker-logs (1)
- Fetch the logs of a container
- docker-pause (1)
- Pause all processes within a container
- docker-port (1)
- List port mappings for the CONTAINER, or lookup the pu...
- docker-push (1)
- Push an image or a repository to a registry
- docker-save (1)
- Save an image(s) to a tar archive (streamed to STDOUT ...
- docker-search (1)
- Search the Docker Hub for images
- docker-stop (1)
- Stop a container by sending SIGTERM and then SIGKILL a...
- docker-top (1)
- Display the running processes of a container
- docker-unpause (1)
- Unpause all processes within a container
- docker-version (1)
- Show the Docker version information.
- docker-wait (1)
- Block until a container stops, then print its exit code.
- Dockerfile (5)
- automate the steps of creating a Docker image
- html_cssdefaults (n)
- Default CSS style for HTML export plugins
- tcllib_msgcat (n)
- Message catalog management for the various document pa...
- msgcat_c (n)
- Message catalog for the doctoc parser (C)
- msgcat_de (n)
- Message catalog for the doctoc parser (DE)
- msgcat_en (n)
- Message catalog for the doctoc parser (EN)
- msgcat_fr (n)
- Message catalog for the doctoc parser (FR)
- export_html (n)
- HTML export plugin
- domainname (1)
- show or set the system's NIS/YP domain name
- dosfsck (8)
- check and repair MS-DOS filesystems
- dot (1)
- filter for drawing directed graphs
- dot (1p)
- execute commands in the current environment
- dotty (1)
- A Customizable Graph Editor
- doupdate (3ncurses)
- refresh curses windows and lines
- dpm_for_each_dev (9)
- device iterator.
- dpm_suspend_start (9)
- Prepare devices for PM transition and suspend them.
- DPMSCapable (3)
- returns the DPMS capability of the X server
- DPMSDisable (3)
- disables DPMS on the specified display
- DPMSEnable (3)
- enables DPMS on the specified display
- DPMSForceLevel (3)
- forces a DPMS capable display into the specified power...
- DPMSGetTimeouts (3)
- retrieves the timeout values used by the X server for ...
- DPMSGetVersion (3)
- returns the version of the DPMS extension implemented ...
- DPMSInfo (3)
- returns information about the current DPMS state
- DPMSQueryExtension (3)
- queries the X server to determine the availability o...
- DPMSSetTimeouts (3)
- permits applications to set the timeout values used by...
- dracauth (3)
- Dynamic Relay Authorization Control client interface
- driver (3form)
- command-processing loop of the form system
- driver (3menu)
- command-processing loop of the menu system
- driver_attach (9)
- try to bind driver to devices.
- driver_for_each_device (9)
- Iterator for devices bound to a driver.
- driver_register (9)
- register driver with bus
- drm_add_modes_noedid (9)
- add modes for the connectors without EDID
- drm_av_sync_delay (9)
- compute the HDMI/DP sink audio-video sync delay
- drm_calc_vbltimestamp_from_scanoutpos (9)
- precise vblank timestamp helper
- drm_crtc_check_viewport (9)
- Checks that a framebuffer is big enough for the...
- drm_crtc_cleanup (9)
- Clean up the core crtc usage
- drm_crtc_helper_set_config (9)
- set a new config from userspace
- drm_crtc_helper_set_mode (9)
- internal helper to set a mode
- drm_crtc_index (9)
- find the index of a registered CRTC
- drm_crtc_init_with_planes (9)
- Initialise a new CRTC object with specified p...
- drm_crtc_vblank_put (9)
- give up ownership of vblank events
- drm_cvt_mode (9)
- create a modeline based on the CVT algorithm
- drm_detect_hdmi_monitor (9)
- detect whether monitor is HDMI
- drm_detect_monitor_audio (9)
- check monitor audio capability
- drm_dev_set_unique (9)
- Set the unique name of a DRM device
- drm_dp_aux_register (9)
- initialise and register aux channel
- drm_dp_dpcd_read (9)
- read a series of bytes from the DPCD
- drm_dp_dpcd_readb (9)
- read a single byte from the DPCD
- drm_dp_dpcd_write (9)
- write a series of bytes to the DPCD
- drm_dp_dpcd_writeb (9)
- write a single byte to the DPCD
- drm_edid_block_valid (9)
- Sanity check the EDID block (base or extension)
- drm_edid_duplicate (9)
- duplicate an EDID and the extensions
- drm_edid_header_is_valid (9)
- sanity check the header of the base EDID block
- drm_edid_is_valid (9)
- sanity check EDID data
- drm_fb_get_bpp_depth (9)
- get the bpp/depth values for format
- drm_fb_helper_blank (9)
- implementation for - >fb_blank
- drm_fb_helper_check_var (9)
- implementation for - >fb_check_var
- drm_fb_helper_debug_enter (9)
- implementation for - >fb_debug_enter
- drm_fb_helper_debug_leave (9)
- implementation for - >fb_debug_leave
- drm_fb_helper_fill_fix (9)
- initializes fixed fbdev information
- drm_fb_helper_fill_var (9)
- initalizes variable fbdev information
- drm_fb_helper_hotplug_event (9)
- respond to a hotplug notification by probin...
- drm_fb_helper_init (9)
- initialize a drm_fb_helper structure
- drm_fb_helper_initial_config (9)
- setup a sane initial connector configuration
- drm_fb_helper_pan_display (9)
- implementation for - >fb_pan_display
- drm_fb_helper_restore_fbdev_mode_unlo... (9)
- restore fbdev configuration
- drm_fb_helper_set_par (9)
- implementation for - >fb_set_par
- drm_fb_helper_setcmap (9)
- implementation for - >fb_setcmap
- drm_fb_helper_single_add_all_connectors (9)
- add all connectors to fbdev emu...
- drm_format_horz_chroma_subsampling (9)
- get the horizontal chroma subsamplin...
- drm_format_num_planes (9)
- get the number of planes for format
- drm_format_plane_cpp (9)
- determine the bytes per pixel value
- drm_format_vert_chroma_subsampling (9)
- get the vertical chroma subsampling ...
- drm_framebuffer_reference (9)
- incr the fb refcnt
- drm_framebuffer_unregister_private (9)
- unregister a private fb from the loo...
- drm_gem_dumb_destroy (9)
- dumb fb callback helper for gem based drivers
- drm_gem_get_pages (9)
- helper to allocate backing pages for a GEM object fro...
- drm_gem_handle_create (9)
- create a gem handle for an object
- drm_gem_handle_delete (9)
- deletes the given file-private handle
- drm_gem_object_init (9)
- initialize an allocated shmem-backed GEM object
- drm_gem_prime_export (9)
- helper library implemention of the export callback
- drm_gem_prime_fd_to_handle (9)
- PRIME import function for GEM drivers
- drm_gem_prime_handle_to_fd (9)
- PRIME export function for GEM drivers
- drm_gem_prime_import (9)
- helper library implemention of the import callback
- drm_gem_put_pages (9)
- helper to free backing pages for a GEM object
- drm_get_cea_aspect_ratio (9)
- get the picture aspect ratio corresponding to ...
- drm_get_last_vbltimestamp (9)
- retrieve raw timestamp for the most recent vb...
- drm_get_pci_dev (9)
- Register a PCI device with the DRM subsystem
- drm_gtf_mode (9)
- create the modeline based on the GTF algorithm
- drm_gtf_mode_complex (9)
- create the modeline based on the full GTF algorithm
- drm_handle_vblank (9)
- handle a vblank event
- drm_hdmi_avi_infoframe_from_display_mode (9)
- fill an HDMI AVI infoframe wit...
- drm_hdmi_vendor_infoframe_from_displa... (9)
- fill an HDMI infoframe with da...
- drm_helper_connector_dpms (9)
- connector dpms helper implementation
- drm_helper_crtc_in_use (9)
- check if a given CRTC is in a mode_config
- drm_helper_disable_unused_functions (9)
- disable unused objects
- drm_helper_encoder_in_use (9)
- check if a given encoder is in use
- drm_helper_hpd_irq_event (9)
- hotplug processing
- drm_helper_mode_fill_fb_struct (9)
- fill out framebuffer metadata
- drm_helper_move_panel_connectors_to_head (9)
- move panels to the front in th...
- drm_helper_probe_single_connector_modes (9)
- get complete set of display modes
- drm_helper_probe_single_connector_mod... (9)
- get complete set of display modes
- drm_helper_resume_force_mode (9)
- force-restore mode setting configuration
- drm_irq_install (9)
- install IRQ handler
- drm_irq_uninstall (9)
- uninstall the IRQ handler
- drm_kms_helper_hotplug_event (9)
- fire off KMS hotplug events
- drm_kms_helper_poll_disable (9)
- disable output polling
- drm_kms_helper_poll_enable (9)
- re-enable output polling.
- drm_kms_helper_poll_fini (9)
- disable output polling and clean it up
- drm_kms_helper_poll_init (9)
- initialize and enable output polling
- drm_match_cea_mode (9)
- look for a CEA mode matching given mode
- drm_mm_clean (9)
- checks whether an allocator is clean
- drm_mm_for_each_hole (9)
- iterator to walk over all holes
- drm_mm_for_each_node (9)
- iterator to walk over all allocated nodes
- drm_mm_hole_node_end (9)
- computes the end of the hole following node
- drm_mm_hole_node_start (9)
- computes the start of the hole following node
- drm_mm_init_scan_with_range (9)
- initialize range-restricted lru scanning
- drm_mm_initialized (9)
- checks whether an allocator is initialized
- drm_mm_insert_node (9)
- search for space and insert node
- drm_mm_insert_node_generic (9)
- search for space and insert node
- drm_mm_insert_node_in_range (9)
- ranged search for space and insert node
- drm_mm_insert_node_in_range_generic (9)
- ranged search for space and insert ...
- drm_mm_node_allocated (9)
- checks whether a node is allocated
- drm_mm_remove_node (9)
- Remove a memory node from the allocator.
- drm_mm_scan_add_block (9)
- add a node to the scan list
- drm_mm_scan_remove_block (9)
- remove a node from the scan list
- drm_mode_connector_attach_encoder (9)
- attach a connector to an encoder
- drm_mode_connector_list_update (9)
- update the mode list for the connector
- drm_mode_connector_update_edid_property (9)
- update the edid property of a c...
- drm_mode_copy (9)
- copy the mode
- drm_mode_crtc_set_gamma_size (9)
- set the gamma table size
- drm_mode_is_stereo (9)
- check for stereo mode flags
- drm_mode_object_find (9)
- look up a drm object with static lifetime
- drm_mode_set_config_internal (9)
- helper to call - >set_config
- drm_mode_set_name (9)
- set the name on a mode
- drm_mode_validate_size (9)
- make sure modes adhere to size constraints
- drm_mode_vrefresh (9)
- get the vrefresh of a mode
- drm_object_attach_property (9)
- attach a property to a modeset object
- drm_object_property_get_value (9)
- retrieve the value of a property
- drm_object_property_set_value (9)
- set the value of a property
- drm_pci_exit (9)
- Unregister matching PCI devices from the DRM subsystem
- drm_pci_init (9)
- Register matching PCI devices with the DRM subsystem
- drm_plane_cleanup (9)
- Clean up the core plane usage
- drm_plane_helper_check_update (9)
- Check plane update for validity
- drm_platform_init (9)
- Register a platform device with the DRM subsystem
- drm_primary_helper_create_plane (9)
- Create a generic primary plane
- drm_primary_helper_destroy (9)
- Helper for primary plane destruction
- drm_primary_helper_disable (9)
- Helper for primary plane disable
- drm_primary_helper_update (9)
- Helper for primary plane update
- drm_prime_gem_destroy (9)
- helper to clean up a PRIME-imported GEM object
- drm_rect_adjust_size (9)
- adjust the size of the rectangle
- drm_rect_calc_hscale (9)
- calculate the horizontal scaling factor
- drm_rect_calc_hscale_relaxed (9)
- calculate the horizontal scaling factor
- drm_rect_calc_vscale (9)
- calculate the vertical scaling factor
- drm_rect_calc_vscale_relaxed (9)
- calculate the vertical scaling factor
- drm_rect_debug_print (9)
- print the rectangle information
- drm_rect_height (9)
- determine the rectangle height
- drm_rect_translate (9)
- translate the rectangle
- drm_rect_visible (9)
- determine if the the rectangle is visible
- drm_rect_width (9)
- determine the rectangle width
- drm_select_eld (9)
- select one ELD from multiple HDMI/DP sinks
- drm_send_vblank_event (9)
- helper to send vblank event after pageflip
- drm_set_preferred_mode (9)
- Sets the preferred mode of a connector
- drm_usb_exit (9)
- Unregister matching USB devices from the DRM subsystem
- drm_usb_init (9)
- Register matching USB devices with the DRM subsystem
- drm_vblank_post_modeset (9)
- undo drm_vblank_pre_modeset changes
- drm_vblank_put (9)
- give up ownership of vblank events
- drm_vma_node_has_offset (9)
- Check whether node is added to offset manager
- drm_vma_node_is_allowed (9)
- Check whether an open-file is granted access
- drm_vma_node_verify_access (9)
- Access verification helper for TTM
- drm_warn_on_modeset_not_all_locked (9)
- check that all modeset locks are locked
- drmAvailable (3)
- determine whether a DRM kernel driver has been loaded
- drmHandleEvent (3)
- read and process pending DRM events
- DROP_ACCESS_METHOD (7pg161)
- remove an access method
- DROP_SCHEMA (7pg161)
- remove a schema
- DROP_TEXT_SEARCH_CONFIGURATION (7pg161)
- remove a text search configuration
- DROP_TEXT_SEARCH_DICTIONARY (7pg161)
- remove a text search dictionary
- DROP_TEXT_SEARCH_PARSER (7pg161)
- remove a text search parser
- DROP_TEXT_SEARCH_TEMPLATE (7pg161)
- remove a text search template
- drpmsync (8)
- sync a file tree with deltarpms
- tc-drr (8)
- deficit round robin scheduler
- DSA_dup_DH (3osslssl-3)
- create a DH structure out of DSA structure
- DSA_get_default_method (3osslssl-3)
- select DSA method
- DSA_meth_dup (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_free (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get0_app_data (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get0_name (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_bn_mod_exp (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_finish (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_flags (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_init (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_keygen (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_mod_exp (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_paramgen (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_sign (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_sign_setup (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_get_verify (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_new (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set0_app_data (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set1_name (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_bn_mod_exp (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_finish (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_flags (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_init (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_keygen (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_mod_exp (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_paramgen (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_sign (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_sign_setup (3osslssl-3)
- Routines to build up DSA methods
- DSA_meth_set_verify (3osslssl-3)
- Routines to build up DSA methods
- DSA_new_method (3osslssl-3)
- select DSA method
- DSA_OpenSSL (3osslssl-3)
- select DSA method
- DSA_print (3osslssl-3)
- print cryptographic parameters
- DSA_print_fp (3osslssl-3)
- print cryptographic parameters
- DSA_set_default_method (3osslssl-3)
- select DSA method
- DSA_set_method (3osslssl-3)
- select DSA method
- DSAparams_print (3osslssl-3)
- print cryptographic parameters
- DSAparams_print_fp (3osslssl-3)
- print cryptographic parameters
- dtd2xsd (1)
- XML Schema generator from XML document that contains DTD.
- DTLS_client_method (3osslssl-3)
- create a new SSL_CTX object as framework fo...
- DTLS_method (3osslssl-3)
- create a new SSL_CTX object as framework for TLS/S...
- DTLS_server_method (3osslssl-3)
- create a new SSL_CTX object as framework fo...
- DTLSv1_2_client_method (3osslssl-3)
- create a new SSL_CTX object as framewor...
- DTLSv1_2_method (3osslssl-3)
- create a new SSL_CTX object as framework for T...
- DTLSv1_2_server_method (3osslssl-3)
- create a new SSL_CTX object as framewor...
- DTLSv1_client_method (3osslssl-3)
- create a new SSL_CTX object as framework ...
- DTLSv1_method (3osslssl-3)
- create a new SSL_CTX object as framework for TLS...
- DTLSv1_server_method (3osslssl-3)
- create a new SSL_CTX object as framework ...
- dtplite (n)
- Lightweight DocTools Markup Processor
- dumpleases (1)
- display leases granted by udhcp server
- dumpsolv (1)
- print a solv file into a human readable format
- dvihp (1)
- convert a TeX DVI file to Hewlett-Packard PCL
- dvilj (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvilj2p (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvilj4 (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvilj4l (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvilj6 (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvipdf (1)
- Convert TeX DVI file to PDF using ghostscript and dvips
- dvipdft (1)
- create thumbnail images for use with dvipdfm
- dvisvgm (1)
- converts DVI files to the XML-based SVG format
- dvitype (1)
- translate a dvi file for humans
- dynamic_field_info (3form)
- retrieve field characteristics
- e2fsck (8)
- check a Linux ext2/ext3/ext4 file system
- e2label (8)
- Change the label on an ext2/ext3/ext4 filesystem
- eaccess (3)
- check effective user's permissions for a file
- ebb (1)
- extract bounding box information from graphics files
- ebrowse (1)
- create a class hierarchy database
- EC_GF2m_simple_method (3osslssl-3)
- Functions for obtaining EC_METHOD objects
- EC_GFp_mont_method (3osslssl-3)
- Functions for obtaining EC_METHOD objects
- EC_GFp_nist_method (3osslssl-3)
- Functions for obtaining EC_METHOD objects
- EC_GFp_nistp224_method (3osslssl-3)
- Functions for obtaining EC_METHOD objects
- EC_GFp_nistp256_method (3osslssl-3)
- Functions for obtaining EC_METHOD objects
- EC_GFp_nistp521_method (3osslssl-3)
- Functions for obtaining EC_METHOD objects
- EC_GFp_simple_method (3osslssl-3)
- Functions for obtaining EC_METHOD objects
- EC_GROUP_check (3osslssl-3)
- Functions for manipulating EC_GROUP objects
- EC_GROUP_check_discriminant (3osslssl-3)
- Functions for manipulating EC_GROU...
- EC_GROUP_check_named_curve (3osslssl-3)
- Functions for manipulating EC_GROUP...
- EC_GROUP_have_precompute_mult (3osslssl-3)
- Functions for performing mathema...
- EC_GROUP_method_of (3osslssl-3)
- Functions for manipulating EC_GROUP objects
- EC_GROUP_precompute_mult (3osslssl-3)
- Functions for performing mathematical...
- EC_KEY_check_key (3osslssl-3)
- Functions for creating, destroying and manipu...
- EC_KEY_get_method (3osslssl-3)
- Functions for creating, destroying and manip...
- EC_KEY_set_method (3osslssl-3)
- Functions for creating, destroying and manip...
- EC_METHOD_get_field_type (3osslssl-3)
- Functions for obtaining EC_METHOD obj...
- EC_POINT_add (3osslssl-3)
- Functions for performing mathematical operations ...
- EC_POINT_cmp (3osslssl-3)
- Functions for performing mathematical operations ...
- EC_POINT_dbl (3osslssl-3)
- Functions for performing mathematical operations ...
- EC_POINT_hex2point (3osslssl-3)
- Functions for creating, destroying and mani...
- EC_POINT_invert (3osslssl-3)
- Functions for performing mathematical operatio...
- EC_POINT_is_at_infinity (3osslssl-3)
- Functions for performing mathematical ...
- EC_POINT_is_on_curve (3osslssl-3)
- Functions for performing mathematical ope...
- EC_POINT_make_affine (3osslssl-3)
- Functions for performing mathematical ope...
- EC_POINT_method_of (3osslssl-3)
- Functions for creating, destroying and mani...
- EC_POINT_mul (3osslssl-3)
- Functions for performing mathematical operations ...
- EC_POINT_point2hex (3osslssl-3)
- Functions for creating, destroying and mani...
- EC_POINTs_make_affine (3osslssl-3)
- Functions for performing mathematical op...
- EC_POINTs_mul (3osslssl-3)
- Functions for performing mathematical operations...
- echo (1)
- display a line of text
- echo (1p)
- write arguments to standard output
- echo (3ncurses)
- curses input options
- echo_sp (3ncurses)
- curses screen-pointer extension
- echo_wchar (3ncurses)
- add a complex character and rendition to a curses win...
- echochar (3ncurses)
- add a character (with attributes) to a curses window, ...
- ed2k-link (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- edd_dev_is_type (9)
- is this EDD device a 'type' device?
- edd_get_pci_dev (9)
- finds pci_dev that matches edev
- edd_show_raw_data (9)
- copies raw data to buffer for userspace to parse
- editcap (1)
- Edit and/or translate the format of capture files
- editdiff (1)
- fix offsets and counts of a hand-edited diff
- editline (3)
- line editor, history and tokenization functions
- edonr256-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- edonr512-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- efibootmgr (8)
- manipulate the EFI Boot Manager
- egrep (1)
- print lines matching a pattern
- el_tok_str (3)
- line editor, history and tokenization functions
- el_deletestr (3)
- line editor, history and tokenization functions
- el_end (3)
- line editor, history and tokenization functions
- el_get (3)
- line editor, history and tokenization functions
- el_getc (3)
- line editor, history and tokenization functions
- el_gets (3)
- line editor, history and tokenization functions
- el_history (3)
- line editor, history and tokenization functions
- el_history_end (3)
- line editor, history and tokenization functions
- el_history_init (3)
- line editor, history and tokenization functions
- el_init (3)
- line editor, history and tokenization functions
- el_insertstr (3)
- line editor, history and tokenization functions
- el_line (3)
- line editor, history and tokenization functions
- el_parse (3)
- line editor, history and tokenization functions
- el_push (3)
- line editor, history and tokenization functions
- el_reset (3)
- line editor, history and tokenization functions
- el_resize (3)
- line editor, history and tokenization functions
- el_set (3)
- line editor, history and tokenization functions
- el_source (3)
- line editor, history and tokenization functions
- el_tok_end (3)
- line editor, history and tokenization functions
- el_tok_init (3)
- line editor, history and tokenization functions
- el_tok_line (3)
- line editor, history and tokenization functions
- el_tok_reset (3)
- line editor, history and tokenization functions
- elf_getdata (3)
- Get washed data of section
- elfedit (1)
- update ELF header and program property of ELF files
- Email::Sender::Manual (3)
- table of contents for the Email::Sender manual
- Email::Sender::Manual::QuickStart (3)
- how to start using Email::Sender righ...
- Email::Sender::Role::CommonSending (3)
- the common sending tasks most Email:...
- Email::Sender::Role::HasMessage (3)
- an object that has a message
- Email::Sender::Simple (3)
- the simple interface for sending mail with Sender
- Email::Sender::Success (3)
- the result of successfully sending mail
- Email::Sender::Success::Partial (3)
- a report of partial success when delive...
- Email::Sender::Transport::DevNull (3)
- happily throw away your mail
- Email::Sender::Transport::Failable (3)
- a wrapper to makes things fail predi...
- Email::Sender::Transport::Print (3)
- print email to a filehandle (like stdout)
- Email::Sender::Transport::SMTP::Persi... (3)
- an SMTP client that stays online
- Email::Sender::Util (3)
- random stuff that makes Email::Sender go
- Email::Valid (3)
- Check validity of Internet email addresses
- tc-ematch (8)
- extended matches for use with "basic" or "flow" filters
- empathy (1)
- GNOME multi-protocol chat and call client
- empathy-accounts (1)
- Accounts configuration dialog for Empathy instant mess...
- enable_cmf (9)
- switch on the channel measurement for a specific device
- enable_irq (9)
- enable handling of an irq
- encguess (1)
- guess character encodings of files
- encode.h (3)
- API for Brotli compression.
- Encode::CN (3)
- China-based Chinese Encodings
- Encode::TW (3)
- Taiwan-based Chinese Encodings
- encode_keychange (1)
- produce the KeyChange string for SNMPv3
- encode_rs16 (9)
- Calculate the parity for data values (16bit data width)
- encode_rs8 (9)
- Calculate the parity for data values (8bit data width)
- endfsent (3)
- handle fstab entries
- endgame (6x)
- endgame chess screensaver
- endhostent (3)
- get network host entry
- endhostent (3p)
- network host database functions
- endian (3)
- convert values between host and big-/little-endian byt...
- endnetgrent (3)
- handle network group entries
- getnetpath (3t)
- get
- endspent (3)
- get shadow password file entry
- endusershell (3)
- get permitted user shells
- ENGINE_add (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_by_id (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_cleanup (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_cmd_is_executable (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_ctrl (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_ctrl_cmd (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_ctrl_cmd_string (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_finish (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_free (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_cipher (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_cipher_engine (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_ciphers (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_cmd_defns (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_ctrl_function (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_default_DH (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_default_DSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_default_RAND (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_default_RSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_destroy_function (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_DH (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_digest (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_digest_engine (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_digests (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_DSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_finish_function (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_first (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_flags (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_id (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_init_function (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_last (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_load_privkey_function (3osslssl-3)
- ENGINE cryptographic module s...
- ENGINE_get_load_pubkey_function (3osslssl-3)
- ENGINE cryptographic module su...
- ENGINE_get_name (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_next (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_prev (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_RAND (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_RSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_get_table_flags (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_init (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_load_builtin_engines (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_load_private_key (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_load_public_key (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_new (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_all_ciphers (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_all_complete (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_all_DH (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_all_digests (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_all_DSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_all_RAND (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_all_RSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_ciphers (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_complete (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_DH (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_digests (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_DSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_RAND (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_register_RSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_remove (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_ciphers (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_cmd_defns (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_ctrl_function (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_default (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_default_ciphers (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_default_DH (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_default_digests (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_default_DSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_default_RAND (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_default_RSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_default_string (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_destroy_function (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_DH (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_digests (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_DSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_finish_function (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_flags (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_id (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_init_function (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_load_privkey_function (3osslssl-3)
- ENGINE cryptographic module s...
- ENGINE_set_load_pubkey_function (3osslssl-3)
- ENGINE cryptographic module su...
- ENGINE_set_name (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_RAND (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_RSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_set_table_flags (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_unregister_ciphers (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_unregister_DH (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_unregister_digests (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_unregister_DSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_unregister_RAND (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_unregister_RSA (3osslssl-3)
- ENGINE cryptographic module support
- ENGINE_up_ref (3osslssl-3)
- ENGINE cryptographic module support
- english (5)
- flag format for English ispell dictionaries
- enscript (1)
- convert text files to PostScript, HTML, RTF, ANSI, and...
- enum_ieee80211_channel_flags (9)
- channel flags
- enum_ieee80211_filter_flags (9)
- hardware filter flags
- enum_ieee80211_hw_flags (9)
- hardware flags
- enum_ieee80211_rate_control_changed (9)
- flags to indicate what changed
- enum_ieee80211_tpt_led_trigger_flags (9)
- throughput trigger flags
- enum_irq_gc_flags (9)
- Initialization flags for generic irq chips
- enum_mac80211_rate_control_flags (9)
- per-rate flags set by the Rate Control...
- enum_mpath_info_flags (9)
- mesh path information flags
- enum_positive_aop_returns (9)
- aop return codes with specific semantics
- enum_wimax_st (9)
- The different states of a WiMAX device
- enum_wiphy_flags (9)
- wiphy capability flags
- enum_wiphy_params_flags (9)
- set_wiphy_params bitfield values
- env (1p)
- set the environment for command invocation
- environ (3p)
- array of character pointers to the environment strings
- envsubst (1)
- substitutes environment variables in shell format strings
- eof (n)
- Check for end of file condition on channel
- epic (1)
- Internet Relay Chat client for UNIX like systems
- epicycle (6x)
- draws a point moving around a circle which moves aroun...
- eps2eps (1)
- Ghostscript PostScript "distiller"
- eqn (1)
- format equations for troff or MathML
- eqn2graph (1)
- convert an EQN equation into a cropped image
- erasechar (3ncurses)
- curses environment query routines
- erasechar_sp (3ncurses)
- curses screen-pointer extension
- erasewchar (3ncurses)
- curses environment query routines
- ERR_clear_error (3osslssl-3)
- clear the error queue
- ERR_error_string (3osslssl-3)
- obtain human-readable error message
- ERR_error_string_n (3osslssl-3)
- obtain human-readable error message
- ERR_func_error_string (3osslssl-3)
- obtain human-readable error message
- ERR_lib_error_string (3osslssl-3)
- obtain human-readable error message
- ERR_reason_error_string (3osslssl-3)
- obtain human-readable error message
- ERR_remove_thread_state (3osslssl-3)
- DEPRECATED
- errno.h (0p)
- system error numbers
- error::sdt (7stap)
- <sys/sdt.h> marker failures
- esd (1)
- The Enlightened Sound Daemon
- esd-config (1)
- The Enlightened Sound Daemon
- Mail::SpamAssassin::Plugin::Esp (3p)
- checks ESP abused accounts
- espdiff (1)
- apply the appropriate transformation to a set of patches
- espeak (1)
- A multi-lingual software speech synthesizer.
- eth_broadcast_addr (9)
- Assign broadcast address
- eth_change_mtu (9)
- set new MTU size
- eth_commit_mac_addr_change (9)
- commit mac change
- eth_header (9)
- create the Ethernet header
- eth_header_cache (9)
- fill cache entry from neighbour
- eth_header_cache_update (9)
- update cache entry
- eth_header_parse (9)
- extract hardware address from packet
- eth_hw_addr_inherit (9)
- Copy dev_addr from another net_device
- eth_hw_addr_random (9)
- Generate software assigned random Ethernet and set d...
- eth_mac_addr (9)
- set new Ethernet hardware address
- eth_prepare_mac_addr_change (9)
- prepare for mac change
- eth_random_addr (9)
- Generate software assigned random Ethernet address
- eth_rebuild_header (9)
- rebuild the Ethernet MAC header.
- eth_type_trans (9)
- determine the packet's protocol ID.
- eth_zero_addr (9)
- Assign zero address
- ether-wake (8)
- A tool to send a Wake-On-LAN "Magic Packet"
- ether_addr_copy (9)
- Copy an Ethernet address
- ether_addr_equal (9)
- Compare two Ethernet addresses
- ether_addr_equal_64bits (9)
- Compare two Ethernet addresses
- ether_addr_equal_unaligned (9)
- Compare two not u16 aligned Ethernet addresses
- ether_aton (3)
- Ethernet address manipulation routines
- ether_aton_r (3)
- Ethernet address manipulation routines
- ether_hostton (3)
- Ethernet address manipulation routines
- ether_line (3)
- Ethernet address manipulation routines
- ether_ntoa (3)
- Ethernet address manipulation routines
- ether_ntoa_r (3)
- Ethernet address manipulation routines
- ether_ntohost (3)
- Ethernet address manipulation routines
- ether_setup (9)
- setup Ethernet network device
- ethers (5)
- Ethernet address to IP number database
- ethtool (8)
- query or control network driver and hardware settings
- eu-elfclassify (1)
- Determine the type of an ELF file.
- euidaccess (3)
- check effective user's permissions for a file
- eventfd_ctx_fdget (9)
- Acquires a reference to the internal eventfd context.
- eventfd_ctx_fileget (9)
- Acquires a reference to the internal eventfd context.
- eventfd_ctx_get (9)
- Acquires a reference to the internal eventfd context.
- eventfd_ctx_put (9)
- Releases a reference to the internal eventfd context.
- eventfd_ctx_read (9)
- Reads the eventfd counter or wait if it is zero.
- eventfd_ctx_remove_wait_queue (9)
- Read the current counter and removes wait...
- eventfd_signal (9)
- Adds n to the eventfd counter.
- eventlogadm (8)
- push records into the Samba event log store
- events (n)
- Event support for reflected/virtual channels
- eview (1)
- easy Vim, edit a file with Vim and setup for modeless ...
- evim (1)
- easy Vim, edit a file with Vim and setup for modeless ...
- evp (7osslssl-3)
- high-level cryptographic functions
- EVP_aes_128_cbc (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_cbc_hmac_sha1 (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_cbc_hmac_sha256 (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_ccm (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_cfb (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_cfb1 (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_cfb128 (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_cfb8 (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_ctr (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_ecb (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_gcm (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_ocb (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_ofb (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_wrap (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_wrap_pad (3osslssl-3)
- EVP AES cipher
- EVP_aes_128_xts (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_cbc (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_ccm (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_cfb (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_cfb1 (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_cfb128 (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_cfb8 (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_ctr (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_ecb (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_gcm (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_ocb (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_ofb (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_wrap (3osslssl-3)
- EVP AES cipher
- EVP_aes_192_wrap_pad (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_cbc (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_cbc_hmac_sha1 (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_cbc_hmac_sha256 (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_ccm (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_cfb (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_cfb1 (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_cfb128 (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_cfb8 (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_ctr (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_ecb (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_gcm (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_ocb (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_ofb (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_wrap (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_wrap_pad (3osslssl-3)
- EVP AES cipher
- EVP_aes_256_xts (3osslssl-3)
- EVP AES cipher
- EVP_aria_128_cbc (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_ccm (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_cfb (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_cfb1 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_cfb128 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_cfb8 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_ctr (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_ecb (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_gcm (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_128_ofb (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_cbc (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_ccm (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_cfb (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_cfb1 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_cfb128 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_cfb8 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_ctr (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_ecb (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_gcm (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_192_ofb (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_cbc (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_ccm (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_cfb (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_cfb1 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_cfb128 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_cfb8 (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_ctr (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_ecb (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_gcm (3osslssl-3)
- EVP ARIA cipher
- EVP_aria_256_ofb (3osslssl-3)
- EVP ARIA cipher
- EVP_ASYM_CIPHER-RSA (7osslssl-3)
- RSA Asymmetric Cipher algorithm support
- EVP_ASYM_CIPHER-SM2 (7osslssl-3)
- SM2 Asymmetric Cipher algorithm support
- EVP_ASYM_CIPHER_do_all_provided (3osslssl-3)
- Functions to manage EVP_ASYM_C...
- EVP_ASYM_CIPHER_fetch (3osslssl-3)
- Functions to manage EVP_ASYM_CIPHER algo...
- EVP_ASYM_CIPHER_free (3osslssl-3)
- Functions to manage EVP_ASYM_CIPHER algor...
- EVP_ASYM_CIPHER_get0_description (3osslssl-3)
- Functions to manage EVP_ASYM_...
- EVP_ASYM_CIPHER_get0_name (3osslssl-3)
- Functions to manage EVP_ASYM_CIPHER ...
- EVP_ASYM_CIPHER_get0_provider (3osslssl-3)
- Functions to manage EVP_ASYM_CIP...
- EVP_ASYM_CIPHER_gettable_ctx_params (3osslssl-3)
- Functions to manage EVP_AS...
- EVP_ASYM_CIPHER_is_a (3osslssl-3)
- Functions to manage EVP_ASYM_CIPHER algor...
- EVP_ASYM_CIPHER_names_do_all (3osslssl-3)
- Functions to manage EVP_ASYM_CIPH...
- EVP_ASYM_CIPHER_settable_ctx_params (3osslssl-3)
- Functions to manage EVP_AS...
- EVP_ASYM_CIPHER_up_ref (3osslssl-3)
- Functions to manage EVP_ASYM_CIPHER alg...
- EVP_bf_cbc (3osslssl-3)
- EVP Blowfish cipher
- EVP_bf_cfb (3osslssl-3)
- EVP Blowfish cipher
- EVP_bf_cfb64 (3osslssl-3)
- EVP Blowfish cipher
- EVP_bf_ecb (3osslssl-3)
- EVP Blowfish cipher
- EVP_bf_ofb (3osslssl-3)
- EVP Blowfish cipher
- EVP_camellia_128_cbc (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_128_cfb (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_128_cfb1 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_128_cfb128 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_128_cfb8 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_128_ctr (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_128_ecb (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_128_ofb (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_192_cbc (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_192_cfb (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_192_cfb1 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_192_cfb128 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_192_cfb8 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_192_ctr (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_192_ecb (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_192_ofb (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_256_cbc (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_256_cfb (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_256_cfb1 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_256_cfb128 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_256_cfb8 (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_256_ctr (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_256_ecb (3osslssl-3)
- EVP Camellia cipher
- EVP_camellia_256_ofb (3osslssl-3)
- EVP Camellia cipher
- EVP_cast5_cbc (3osslssl-3)
- EVP CAST cipher
- EVP_cast5_cfb (3osslssl-3)
- EVP CAST cipher
- EVP_cast5_cfb64 (3osslssl-3)
- EVP CAST cipher
- EVP_cast5_ecb (3osslssl-3)
- EVP CAST cipher
- EVP_cast5_ofb (3osslssl-3)
- EVP CAST cipher
- EVP_chacha20 (3osslssl-3)
- EVP ChaCha20 stream cipher
- EVP_chacha20_poly1305 (3osslssl-3)
- EVP ChaCha20 stream cipher
- EVP_Cipher (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER-AES (7osslssl-3)
- The AES EVP_CIPHER implementations
- EVP_CIPHER-ARIA (7osslssl-3)
- The ARIA EVP_CIPHER implementations
- EVP_CIPHER-BLOWFISH (7osslssl-3)
- The BLOBFISH EVP_CIPHER implementations
- EVP_CIPHER-CAMELLIA (7osslssl-3)
- The CAMELLIA EVP_CIPHER implementations
- EVP_CIPHER-CAST (7osslssl-3)
- The CAST EVP_CIPHER implementations
- EVP_CIPHER-CHACHA (7osslssl-3)
- The CHACHA EVP_CIPHER implementations
- EVP_CIPHER-DES (7osslssl-3)
- The DES EVP_CIPHER implementations
- EVP_CIPHER-IDEA (7osslssl-3)
- The IDEA EVP_CIPHER implementations
- EVP_CIPHER-NULL (7osslssl-3)
- The NULL EVP_CIPHER implementation
- EVP_CIPHER-RC2 (7osslssl-3)
- The RC2 EVP_CIPHER implementations
- EVP_CIPHER-RC4 (7osslssl-3)
- The RC4 EVP_CIPHER implementations
- EVP_CIPHER-RC5 (7osslssl-3)
- The RC5 EVP_CIPHER implementations
- EVP_CIPHER-SEED (7osslssl-3)
- The SEED EVP_CIPHER implementations
- EVP_CIPHER-SM4 (7osslssl-3)
- The SM4 EVP_CIPHER implementations
- EVP_CIPHER_asn1_to_param (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_block_size (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_block_size (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_cipher (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_clear_flags (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_ctrl (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_encrypting (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_flags (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_free (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get0_cipher (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get0_name (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get1_cipher (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_app_data (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_block_size (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_cipher_data (3osslssl-3)
- Routines to inspect and modify ...
- EVP_CIPHER_CTX_get_iv_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_key_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_mode (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_nid (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_num (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_original_iv (3osslssl-3)
- Routines to inspect EVP_CIPHER_...
- EVP_CIPHER_CTX_get_params (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_tag_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_type (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_get_updated_iv (3osslssl-3)
- Routines to inspect EVP_CIPHER_C...
- EVP_CIPHER_CTX_gettable_params (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_is_encrypting (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_iv (3osslssl-3)
- Routines to inspect EVP_CIPHER_CTX IV data
- EVP_CIPHER_CTX_iv_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_iv_noconst (3osslssl-3)
- Routines to inspect EVP_CIPHER_CTX I...
- EVP_CIPHER_CTX_key_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_mode (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_new (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_nid (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_num (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_original_iv (3osslssl-3)
- Routines to inspect EVP_CIPHER_CTX ...
- EVP_CIPHER_CTX_reset (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_set_app_data (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_set_cipher_data (3osslssl-3)
- Routines to inspect and modify ...
- EVP_CIPHER_CTX_set_flags (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_set_key_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_set_num (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_set_padding (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_set_params (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_settable_params (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_tag_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_test_flags (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_CTX_type (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_do_all_provided (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_fetch (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_flags (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_free (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get0_description (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get0_name (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get0_provider (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get_block_size (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get_flags (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get_iv_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get_key_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get_mode (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get_nid (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get_params (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_get_type (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_gettable_ctx_params (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_gettable_params (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_is_a (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_iv_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_key_length (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_meth_dup (3osslssl-3)
- Routines to build up EVP_CIPHER methods
- EVP_CIPHER_meth_free (3osslssl-3)
- Routines to build up EVP_CIPHER methods
- EVP_CIPHER_meth_get_cleanup (3osslssl-3)
- Routines to build up EVP_CIPHER me...
- EVP_CIPHER_meth_get_ctrl (3osslssl-3)
- Routines to build up EVP_CIPHER methods
- EVP_CIPHER_meth_get_do_cipher (3osslssl-3)
- Routines to build up EVP_CIPHER ...
- EVP_CIPHER_meth_get_get_asn1_params (3osslssl-3)
- Routines to build up EVP_C...
- EVP_CIPHER_meth_get_init (3osslssl-3)
- Routines to build up EVP_CIPHER methods
- EVP_CIPHER_meth_get_set_asn1_params (3osslssl-3)
- Routines to build up EVP_C...
- EVP_CIPHER_meth_new (3osslssl-3)
- Routines to build up EVP_CIPHER methods
- EVP_CIPHER_meth_set_cleanup (3osslssl-3)
- Routines to build up EVP_CIPHER me...
- EVP_CIPHER_meth_set_ctrl (3osslssl-3)
- Routines to build up EVP_CIPHER methods
- EVP_CIPHER_meth_set_do_cipher (3osslssl-3)
- Routines to build up EVP_CIPHER ...
- EVP_CIPHER_meth_set_flags (3osslssl-3)
- Routines to build up EVP_CIPHER methods
- EVP_CIPHER_meth_set_get_asn1_params (3osslssl-3)
- Routines to build up EVP_C...
- EVP_CIPHER_meth_set_impl_ctx_size (3osslssl-3)
- Routines to build up EVP_CIP...
- EVP_CIPHER_meth_set_init (3osslssl-3)
- Routines to build up EVP_CIPHER methods
- EVP_CIPHER_meth_set_iv_length (3osslssl-3)
- Routines to build up EVP_CIPHER ...
- EVP_CIPHER_meth_set_set_asn1_params (3osslssl-3)
- Routines to build up EVP_C...
- EVP_CIPHER_mode (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_name (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_names_do_all (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_nid (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_param_to_asn1 (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_settable_ctx_params (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_type (3osslssl-3)
- EVP cipher routines
- EVP_CIPHER_up_ref (3osslssl-3)
- EVP cipher routines
- EVP_CipherFinal (3osslssl-3)
- EVP cipher routines
- EVP_CipherFinal_ex (3osslssl-3)
- EVP cipher routines
- EVP_CipherInit (3osslssl-3)
- EVP cipher routines
- EVP_CipherInit_ex (3osslssl-3)
- EVP cipher routines
- EVP_CipherInit_ex2 (3osslssl-3)
- EVP cipher routines
- EVP_CipherUpdate (3osslssl-3)
- EVP cipher routines
- EVP_cleanup (3osslssl-3)
- add algorithms to internal table
- EVP_DecryptFinal (3osslssl-3)
- EVP cipher routines
- EVP_DecryptFinal_ex (3osslssl-3)
- EVP cipher routines
- EVP_DecryptInit (3osslssl-3)
- EVP cipher routines
- EVP_DecryptInit_ex (3osslssl-3)
- EVP cipher routines
- EVP_DecryptInit_ex2 (3osslssl-3)
- EVP cipher routines
- EVP_DecryptUpdate (3osslssl-3)
- EVP cipher routines
- EVP_des_cbc (3osslssl-3)
- EVP DES cipher
- EVP_des_cfb (3osslssl-3)
- EVP DES cipher
- EVP_des_cfb1 (3osslssl-3)
- EVP DES cipher
- EVP_des_cfb64 (3osslssl-3)
- EVP DES cipher
- EVP_des_cfb8 (3osslssl-3)
- EVP DES cipher
- EVP_des_ecb (3osslssl-3)
- EVP DES cipher
- EVP_des_ede (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3 (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3_cbc (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3_cfb (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3_cfb1 (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3_cfb64 (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3_cfb8 (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3_ecb (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3_ofb (3osslssl-3)
- EVP DES cipher
- EVP_des_ede3_wrap (3osslssl-3)
- EVP DES cipher
- EVP_des_ede_cbc (3osslssl-3)
- EVP DES cipher
- EVP_des_ede_cfb (3osslssl-3)
- EVP DES cipher
- EVP_des_ede_cfb64 (3osslssl-3)
- EVP DES cipher
- EVP_des_ede_ecb (3osslssl-3)
- EVP DES cipher
- EVP_des_ede_ofb (3osslssl-3)
- EVP DES cipher
- EVP_des_ofb (3osslssl-3)
- EVP DES cipher
- EVP_desx_cbc (3osslssl-3)
- EVP DES-X cipher
- EVP_enc_null (3osslssl-3)
- EVP cipher routines
- EVP_EncryptFinal (3osslssl-3)
- EVP cipher routines
- EVP_EncryptFinal_ex (3osslssl-3)
- EVP cipher routines
- EVP_EncryptInit (3osslssl-3)
- EVP cipher routines
- EVP_EncryptInit_ex (3osslssl-3)
- EVP cipher routines
- EVP_EncryptInit_ex2 (3osslssl-3)
- EVP cipher routines
- EVP_EncryptUpdate (3osslssl-3)
- EVP cipher routines
- EVP_get_cipherbyname (3osslssl-3)
- EVP cipher routines
- EVP_get_cipherbynid (3osslssl-3)
- EVP cipher routines
- EVP_get_cipherbyobj (3osslssl-3)
- EVP cipher routines
- EVP_idea_cbc (3osslssl-3)
- EVP IDEA cipher
- EVP_idea_cfb (3osslssl-3)
- EVP IDEA cipher
- EVP_idea_cfb64 (3osslssl-3)
- EVP IDEA cipher
- EVP_idea_ecb (3osslssl-3)
- EVP IDEA cipher
- EVP_idea_ofb (3osslssl-3)
- EVP IDEA cipher
- EVP_KDF-HKDF (7osslssl-3)
- The HKDF EVP_KDF implementation
- EVP_KDF-KB (7osslssl-3)
- The Key-Based EVP_KDF implementation
- EVP_KDF-KRB5KDF (7osslssl-3)
- The RFC3961 Krb5 KDF EVP_KDF implementation
- EVP_KDF-PBKDF1 (7osslssl-3)
- The PBKDF1 EVP_KDF implementation
- EVP_KDF-PBKDF2 (7osslssl-3)
- The PBKDF2 EVP_KDF implementation
- EVP_KDF-PKCS12KDF (7osslssl-3)
- The PKCS#12 EVP_KDF implementation
- EVP_KDF-SCRYPT (7osslssl-3)
- The scrypt EVP_KDF implementation
- EVP_KDF-SS (7osslssl-3)
- The Single Step / One Step EVP_KDF implementation
- EVP_KDF-SSHKDF (7osslssl-3)
- The SSHKDF EVP_KDF implementation
- EVP_KDF-TLS13_KDF (7osslssl-3)
- The TLS 1.3 EVP_KDF implementation
- EVP_KDF-TLS1_PRF (7osslssl-3)
- The TLS1 PRF EVP_KDF implementation
- EVP_KDF-X942-ASN1 (7osslssl-3)
- The X9.42-2003 asn1 EVP_KDF implementation
- EVP_KDF-X942-CONCAT (7osslssl-3)
- The X942 Concat EVP_KDF implementation
- EVP_KDF-X963 (7osslssl-3)
- The X9.63-2001 EVP_KDF implementation
- EVP_KDF_fetch (3osslssl-3)
- EVP KDF routines
- EVP_KEM-RSA (7osslssl-3)
- EVP_KEM RSA keytype and algorithm support
- EVP_KEM_do_all_provided (3osslssl-3)
- Functions to manage EVP_KEM algorithm ...
- EVP_KEM_fetch (3osslssl-3)
- Functions to manage EVP_KEM algorithm objects
- EVP_KEM_free (3osslssl-3)
- Functions to manage EVP_KEM algorithm objects
- EVP_KEM_get0_description (3osslssl-3)
- Functions to manage EVP_KEM algorithm...
- EVP_KEM_get0_name (3osslssl-3)
- Functions to manage EVP_KEM algorithm objects
- EVP_KEM_get0_provider (3osslssl-3)
- Functions to manage EVP_KEM algorithm ob...
- EVP_KEM_is_a (3osslssl-3)
- Functions to manage EVP_KEM algorithm objects
- EVP_KEM_names_do_all (3osslssl-3)
- Functions to manage EVP_KEM algorithm obj...
- EVP_KEM_up_ref (3osslssl-3)
- Functions to manage EVP_KEM algorithm objects
- EVP_KEYEXCH-DH (7osslssl-3)
- DH Key Exchange algorithm support
- EVP_KEYEXCH-ECDH (7osslssl-3)
- ECDH Key Exchange algorithm support
- EVP_KEYEXCH-X25519 (7osslssl-3)
- X25519 and X448 Key Exchange algorithm support
- EVP_KEYEXCH-X448 (7osslssl-3)
- X25519 and X448 Key Exchange algorithm support
- EVP_KEYEXCH_do_all_provided (3osslssl-3)
- Functions to manage EVP_KEYEXCH al...
- EVP_KEYEXCH_fetch (3osslssl-3)
- Functions to manage EVP_KEYEXCH algorithm ob...
- EVP_KEYEXCH_free (3osslssl-3)
- Functions to manage EVP_KEYEXCH algorithm obj...
- EVP_KEYEXCH_get0_description (3osslssl-3)
- Functions to manage EVP_KEYEXCH a...
- EVP_KEYEXCH_get0_name (3osslssl-3)
- Functions to manage EVP_KEYEXCH algorith...
- EVP_KEYEXCH_get0_provider (3osslssl-3)
- Functions to manage EVP_KEYEXCH algo...
- EVP_KEYEXCH_gettable_ctx_params (3osslssl-3)
- Functions to manage EVP_KEYEXC...
- EVP_KEYEXCH_is_a (3osslssl-3)
- Functions to manage EVP_KEYEXCH algorithm obj...
- EVP_KEYEXCH_names_do_all (3osslssl-3)
- Functions to manage EVP_KEYEXCH algor...
- EVP_KEYEXCH_settable_ctx_params (3osslssl-3)
- Functions to manage EVP_KEYEXC...
- EVP_KEYEXCH_up_ref (3osslssl-3)
- Functions to manage EVP_KEYEXCH algorithm o...
- EVP_KEYMGMT-CMAC (7osslssl-3)
- EVP_PKEY legacy MAC keytypes and algorithm su...
- EVP_KEYMGMT-DH (7osslssl-3)
- EVP_PKEY DH and DHX keytype and algorithm support
- EVP_KEYMGMT-DHX (7osslssl-3)
- EVP_PKEY DH and DHX keytype and algorithm support
- EVP_KEYMGMT-DSA (7osslssl-3)
- EVP_PKEY DSA keytype and algorithm support
- EVP_KEYMGMT-EC (7osslssl-3)
- EVP_PKEY EC keytype and algorithm support
- EVP_KEYMGMT-HMAC (7osslssl-3)
- EVP_PKEY legacy MAC keytypes and algorithm su...
- EVP_KEYMGMT-Poly1305 (7osslssl-3)
- EVP_PKEY legacy MAC keytypes and algorith...
- EVP_KEYMGMT-RSA (7osslssl-3)
- EVP_PKEY RSA keytype and algorithm support
- EVP_KEYMGMT-Siphash (7osslssl-3)
- EVP_PKEY legacy MAC keytypes and algorithm...
- EVP_KEYMGMT-SM2 (7osslssl-3)
- EVP_PKEY keytype support for the Chinese SM2 s...
- EVP_KEYMGMT_fetch (3osslssl-3)
- EVP key management routines
- EVP_MAC-BLAKE2 (7osslssl-3)
- The BLAKE2 EVP_MAC implementations
- EVP_MAC-BLAKE2BMAC (7osslssl-3)
- The BLAKE2 EVP_MAC implementations
- EVP_MAC-BLAKE2SMAC (7osslssl-3)
- The BLAKE2 EVP_MAC implementations
- EVP_MAC-CMAC (7osslssl-3)
- The CMAC EVP_MAC implementation
- EVP_MAC-GMAC (7osslssl-3)
- The GMAC EVP_MAC implementation
- EVP_MAC-HMAC (7osslssl-3)
- The HMAC EVP_MAC implementation
- EVP_MAC-KMAC (7osslssl-3)
- The KMAC EVP_MAC implementations
- EVP_MAC-KMAC128 (7osslssl-3)
- The KMAC EVP_MAC implementations
- EVP_MAC-KMAC256 (7osslssl-3)
- The KMAC EVP_MAC implementations
- EVP_MAC-Poly1305 (7osslssl-3)
- The Poly1305 EVP_MAC implementation
- EVP_MAC-Siphash (7osslssl-3)
- The Siphash EVP_MAC implementation
- EVP_MAC_fetch (3osslssl-3)
- EVP MAC routines
- EVP_MD-BLAKE2 (7osslssl-3)
- The BLAKE2 EVP_MD implementation
- EVP_MD-common (7osslssl-3)
- The OpenSSL EVP_MD implementations, common things
- EVP_MD-KECCAK-KMAC (7osslssl-3)
- The SHAKE / KECCAK family EVP_MD implementa...
- EVP_MD-MD2 (7osslssl-3)
- The MD2 EVP_MD implementation
- EVP_MD-MD4 (7osslssl-3)
- The MD4 EVP_MD implementation
- EVP_MD-MD5 (7osslssl-3)
- The MD5 EVP_MD implementation
- EVP_MD-MD5-SHA1 (7osslssl-3)
- The MD5-SHA1 EVP_MD implementation
- EVP_MD-MDC2 (7osslssl-3)
- The MDC2 EVP_MD implementation
- EVP_MD-NULL (7osslssl-3)
- The NULL EVP_MD implementation
- EVP_MD-RIPEMD160 (7osslssl-3)
- The RIPEMD160 EVP_MD implementation
- EVP_MD-SHA1 (7osslssl-3)
- The SHA1 EVP_MD implementation
- EVP_MD-SHA2 (7osslssl-3)
- The SHA2 EVP_MD implementation
- EVP_MD-SHA3 (7osslssl-3)
- The SHA3 EVP_MD implementations
- EVP_MD-SHAKE (7osslssl-3)
- The SHAKE / KECCAK family EVP_MD implementations
- EVP_MD-SM3 (7osslssl-3)
- The SM3 EVP_MD implementations
- EVP_MD-WHIRLPOOL (7osslssl-3)
- The WHIRLPOOL EVP_MD implementation
- EVP_md5_sha1 (3osslssl-3)
- MD5 For EVP
- EVP_MD_fetch (3osslssl-3)
- EVP digest routines
- EVP_MD_meth_dup (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_free (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_get_app_datasize (3osslssl-3)
- Routines to build up legacy EVP_M...
- EVP_MD_meth_get_cleanup (3osslssl-3)
- Routines to build up legacy EVP_MD met...
- EVP_MD_meth_get_copy (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_get_ctrl (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_get_final (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_get_flags (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_get_init (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_get_input_blocksize (3osslssl-3)
- Routines to build up legacy EV...
- EVP_MD_meth_get_result_size (3osslssl-3)
- Routines to build up legacy EVP_MD...
- EVP_MD_meth_get_update (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_new (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_set_app_datasize (3osslssl-3)
- Routines to build up legacy EVP_M...
- EVP_MD_meth_set_cleanup (3osslssl-3)
- Routines to build up legacy EVP_MD met...
- EVP_MD_meth_set_copy (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_set_ctrl (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_set_final (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_set_flags (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_set_init (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_MD_meth_set_input_blocksize (3osslssl-3)
- Routines to build up legacy EV...
- EVP_MD_meth_set_result_size (3osslssl-3)
- Routines to build up legacy EVP_MD...
- EVP_MD_meth_set_update (3osslssl-3)
- Routines to build up legacy EVP_MD methods
- EVP_PBE_CipherInit (3osslssl-3)
- Password based encryption routines
- EVP_PBE_CipherInit_ex (3osslssl-3)
- Password based encryption routines
- EVP_PKEY (3osslssl-3)
- public/private key allocation and raw key handling fu...
- EVP_PKEY-CMAC (7osslssl-3)
- EVP_PKEY legacy MAC keytypes and algorithm support
- EVP_PKEY-DH (7osslssl-3)
- EVP_PKEY DH and DHX keytype and algorithm support
- EVP_PKEY-DHX (7osslssl-3)
- EVP_PKEY DH and DHX keytype and algorithm support
- EVP_PKEY-DSA (7osslssl-3)
- EVP_PKEY DSA keytype and algorithm support
- EVP_PKEY-EC (7osslssl-3)
- EVP_PKEY EC keytype and algorithm support
- EVP_PKEY-FFC (7osslssl-3)
- EVP_PKEY DSA and DH/DHX shared FFC parameters.
- EVP_PKEY-HMAC (7osslssl-3)
- EVP_PKEY legacy MAC keytypes and algorithm support
- EVP_PKEY-Poly1305 (7osslssl-3)
- EVP_PKEY legacy MAC keytypes and algorithm s...
- EVP_PKEY-RSA (7osslssl-3)
- EVP_PKEY RSA keytype and algorithm support
- EVP_PKEY-Siphash (7osslssl-3)
- EVP_PKEY legacy MAC keytypes and algorithm su...
- EVP_PKEY-SM2 (7osslssl-3)
- EVP_PKEY keytype support for the Chinese SM2 sign...
- EVP_PKEY_asn1_find (3osslssl-3)
- enumerate public key ASN.1 methods
- EVP_PKEY_asn1_find_str (3osslssl-3)
- enumerate public key ASN.1 methods
- EVP_PKEY_asn1_get0 (3osslssl-3)
- enumerate public key ASN.1 methods
- EVP_PKEY_asn1_get0_info (3osslssl-3)
- enumerate public key ASN.1 methods
- EVP_PKEY_asn1_get_count (3osslssl-3)
- enumerate public key ASN.1 methods
- EVP_PKEY_ASN1_METHOD (3osslssl-3)
- manipulating and registering EVP_PKEY_ASN...
- EVP_PKEY_asn1_set_check (3osslssl-3)
- manipulating and registering EVP_PKEY_...
- EVP_PKEY_asn1_set_param_check (3osslssl-3)
- manipulating and registering EVP...
- EVP_PKEY_asn1_set_public_check (3osslssl-3)
- manipulating and registering EV...
- EVP_PKEY_assign_DH (3osslssl-3)
- EVP_PKEY assignment functions
- EVP_PKEY_assign_SIPHASH (3osslssl-3)
- EVP_PKEY assignment functions
- EVP_PKEY_check (3osslssl-3)
- key and parameter validation functions
- EVP_PKEY_CTX_add1_hkdf_info (3osslssl-3)
- HMAC-based Extract-and-Expand key ...
- EVP_PKEY_CTX_add1_tls1_prf_seed (3osslssl-3)
- TLS PRF key derivation algorithm
- EVP_PKEY_CTX_ctrl (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_ctrl_str (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_ctrl_uint64 (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_dup (3osslssl-3)
- public key algorithm context functions
- EVP_PKEY_CTX_free (3osslssl-3)
- public key algorithm context functions
- EVP_PKEY_CTX_get0_dh_kdf_oid (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_get0_dh_kdf_ukm (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_get0_ecdh_kdf_ukm (3osslssl-3)
- algorithm specific control oper...
- EVP_PKEY_CTX_get0_peerkey (3osslssl-3)
- functions for accessing the EVP_PKEY...
- EVP_PKEY_CTX_get0_pkey (3osslssl-3)
- functions for accessing the EVP_PKEY as...
- EVP_PKEY_CTX_get0_rsa_oaep_label (3osslssl-3)
- algorithm specific control op...
- EVP_PKEY_CTX_get1_id (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_get1_id_len (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_get_app_data (3osslssl-3)
- key and parameter generation and che...
- EVP_PKEY_CTX_get_cb (3osslssl-3)
- key and parameter generation and check fun...
- EVP_PKEY_CTX_get_dh_kdf_md (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_get_dh_kdf_outlen (3osslssl-3)
- algorithm specific control oper...
- EVP_PKEY_CTX_get_dh_kdf_type (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_get_ecdh_cofactor_mode (3osslssl-3)
- algorithm specific control...
- EVP_PKEY_CTX_get_ecdh_kdf_md (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_get_ecdh_kdf_outlen (3osslssl-3)
- algorithm specific control op...
- EVP_PKEY_CTX_get_ecdh_kdf_type (3osslssl-3)
- algorithm specific control oper...
- EVP_PKEY_CTX_get_group_name (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_get_rsa_mgf1_md (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_get_rsa_mgf1_md_name (3osslssl-3)
- algorithm specific control o...
- EVP_PKEY_CTX_get_rsa_oaep_md (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_get_rsa_oaep_md_name (3osslssl-3)
- algorithm specific control o...
- EVP_PKEY_CTX_get_rsa_padding (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_get_rsa_pss_saltlen (3osslssl-3)
- algorithm specific control op...
- EVP_PKEY_CTX_get_signature_md (3osslssl-3)
- algorithm specific control opera...
- EVP_PKEY_CTX_is_a (3osslssl-3)
- public key algorithm context functions
- EVP_PKEY_CTX_md (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_new (3osslssl-3)
- public key algorithm context functions
- EVP_PKEY_CTX_new_from_name (3osslssl-3)
- public key algorithm context functions
- EVP_PKEY_CTX_new_from_pkey (3osslssl-3)
- public key algorithm context functions
- EVP_PKEY_CTX_new_id (3osslssl-3)
- public key algorithm context functions
- EVP_PKEY_CTX_set0_dh_kdf_oid (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_set0_dh_kdf_ukm (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_set0_ecdh_kdf_ukm (3osslssl-3)
- algorithm specific control oper...
- EVP_PKEY_CTX_set0_rsa_oaep_label (3osslssl-3)
- algorithm specific control op...
- EVP_PKEY_CTX_set1_hkdf_key (3osslssl-3)
- HMAC-based Extract-and-Expand key d...
- EVP_PKEY_CTX_set1_hkdf_salt (3osslssl-3)
- HMAC-based Extract-and-Expand key ...
- EVP_PKEY_CTX_set1_id (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_set1_rsa_keygen_pubexp (3osslssl-3)
- algorithm specific control...
- EVP_PKEY_CTX_set_app_data (3osslssl-3)
- key and parameter generation and che...
- EVP_PKEY_CTX_set_cb (3osslssl-3)
- key and parameter generation and check fun...
- EVP_PKEY_CTX_set_dh_kdf_md (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_set_dh_kdf_outlen (3osslssl-3)
- algorithm specific control oper...
- EVP_PKEY_CTX_set_dh_kdf_type (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_set_dh_nid (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_set_dh_pad (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_set_dh_paramgen_generator (3osslssl-3)
- algorithm specific cont...
- EVP_PKEY_CTX_set_dh_paramgen_gindex (3osslssl-3)
- algorithm specific control...
- EVP_PKEY_CTX_set_dh_paramgen_prime_len (3osslssl-3)
- algorithm specific cont...
- EVP_PKEY_CTX_set_dh_paramgen_seed (3osslssl-3)
- algorithm specific control o...
- EVP_PKEY_CTX_set_dh_paramgen_subprime... (3osslssl-3)
- algorithm specific co...
- EVP_PKEY_CTX_set_dh_paramgen_type (3osslssl-3)
- algorithm specific control o...
- EVP_PKEY_CTX_set_dh_rfc5114 (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_set_dhx_rfc5114 (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_set_dsa_paramgen_bits (3osslssl-3)
- algorithm specific control ...
- EVP_PKEY_CTX_set_dsa_paramgen_gindex (3osslssl-3)
- algorithm specific contro...
- EVP_PKEY_CTX_set_dsa_paramgen_md (3osslssl-3)
- algorithm specific control op...
- EVP_PKEY_CTX_set_dsa_paramgen_md_props (3osslssl-3)
- algorithm specific cont...
- EVP_PKEY_CTX_set_dsa_paramgen_q_bits (3osslssl-3)
- algorithm specific contro...
- EVP_PKEY_CTX_set_dsa_paramgen_seed (3osslssl-3)
- algorithm specific control ...
- EVP_PKEY_CTX_set_dsa_paramgen_type (3osslssl-3)
- algorithm specific control ...
- EVP_PKEY_CTX_set_ec_param_enc (3osslssl-3)
- algorithm specific control opera...
- EVP_PKEY_CTX_set_ec_paramgen_curve_nid (3osslssl-3)
- algorithm specific cont...
- EVP_PKEY_CTX_set_ecdh_cofactor_mode (3osslssl-3)
- algorithm specific control...
- EVP_PKEY_CTX_set_ecdh_kdf_md (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_set_ecdh_kdf_outlen (3osslssl-3)
- algorithm specific control op...
- EVP_PKEY_CTX_set_ecdh_kdf_type (3osslssl-3)
- algorithm specific control oper...
- EVP_PKEY_CTX_set_group_name (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_set_hkdf_md (3osslssl-3)
- HMAC-based Extract-and-Expand key der...
- EVP_PKEY_CTX_set_hkdf_mode (3osslssl-3)
- HMAC-based Extract-and-Expand key d...
- EVP_PKEY_CTX_set_kem_op (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_set_mac_key (3osslssl-3)
- algorithm specific control operations
- EVP_PKEY_CTX_set_rsa_keygen_bits (3osslssl-3)
- algorithm specific control op...
- EVP_PKEY_CTX_set_rsa_keygen_primes (3osslssl-3)
- algorithm specific control ...
- EVP_PKEY_CTX_set_rsa_keygen_pubexp (3osslssl-3)
- algorithm specific control ...
- EVP_PKEY_CTX_set_rsa_mgf1_md (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_set_rsa_mgf1_md_name (3osslssl-3)
- algorithm specific control o...
- EVP_PKEY_CTX_set_rsa_oaep_md (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_set_rsa_oaep_md_name (3osslssl-3)
- algorithm specific control o...
- EVP_PKEY_CTX_set_rsa_padding (3osslssl-3)
- algorithm specific control operat...
- EVP_PKEY_CTX_set_rsa_pss_keygen_md (3osslssl-3)
- EVP_PKEY RSA-PSS algorithm ...
- EVP_PKEY_CTX_set_rsa_pss_saltlen (3osslssl-3)
- algorithm specific control op...
- EVP_PKEY_CTX_set_signature_md (3osslssl-3)
- algorithm specific control opera...
- EVP_PKEY_CTX_set_tls1_prf_md (3osslssl-3)
- TLS PRF key derivation algorithm
- EVP_PKEY_decapsulate (3osslssl-3)
- Key decapsulation using a KEM algorithm w...
- EVP_PKEY_decrypt (3osslssl-3)
- decrypt using a public key algorithm
- EVP_PKEY_decrypt_init (3osslssl-3)
- decrypt using a public key algorithm
- EVP_PKEY_decrypt_init_ex (3osslssl-3)
- decrypt using a public key algorithm
- EVP_PKEY_derive (3osslssl-3)
- derive public key algorithm shared secret
- EVP_PKEY_derive_init (3osslssl-3)
- derive public key algorithm shared secret
- EVP_PKEY_derive_init_ex (3osslssl-3)
- derive public key algorithm shared secret
- EVP_PKEY_derive_set_peer (3osslssl-3)
- derive public key algorithm shared se...
- EVP_PKEY_derive_set_peer_ex (3osslssl-3)
- derive public key algorithm shared...
- EVP_PKEY_dup (3osslssl-3)
- public/private key allocation and raw key handlin...
- EVP_PKEY_encapsulate (3osslssl-3)
- Key encapsulation using a KEM algorithm w...
- EVP_PKEY_encrypt (3osslssl-3)
- encrypt using a public key algorithm
- EVP_PKEY_encrypt_init (3osslssl-3)
- encrypt using a public key algorithm
- EVP_PKEY_encrypt_init_ex (3osslssl-3)
- encrypt using a public key algorithm
- EVP_PKEY_free (3osslssl-3)
- public/private key allocation and raw key handli...
- EVP_PKEY_gen_cb (3osslssl-3)
- key and parameter generation and check functions
- EVP_PKEY_generate (3osslssl-3)
- key and parameter generation and check funct...
- EVP_PKEY_get0_DH (3osslssl-3)
- EVP_PKEY assignment functions
- EVP_PKEY_get0_hmac (3osslssl-3)
- EVP_PKEY assignment functions
- EVP_PKEY_get0_siphash (3osslssl-3)
- EVP_PKEY assignment functions
- EVP_PKEY_get1_DH (3osslssl-3)
- EVP_PKEY assignment functions
- EVP_PKEY_keygen (3osslssl-3)
- key and parameter generation and check functions
- EVP_PKEY_keygen_init (3osslssl-3)
- key and parameter generation and check fu...
- EVP_PKEY_meth_add0 (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_copy (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_find (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_free (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get0 (3osslssl-3)
- enumerate public key methods
- EVP_PKEY_meth_get0_info (3osslssl-3)
- enumerate public key methods
- EVP_PKEY_meth_get_check (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_cleanup (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_copy (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_count (3osslssl-3)
- enumerate public key methods
- EVP_PKEY_meth_get_ctrl (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_decrypt (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_derive (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_digest_custom (3osslssl-3)
- manipulating EVP_PKEY_METHOD s...
- EVP_PKEY_meth_get_digestsign (3osslssl-3)
- manipulating EVP_PKEY_METHOD stru...
- EVP_PKEY_meth_get_digestverify (3osslssl-3)
- manipulating EVP_PKEY_METHOD st...
- EVP_PKEY_meth_get_encrypt (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_init (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_keygen (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_param_check (3osslssl-3)
- manipulating EVP_PKEY_METHOD str...
- EVP_PKEY_meth_get_paramgen (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_public_check (3osslssl-3)
- manipulating EVP_PKEY_METHOD st...
- EVP_PKEY_meth_get_sign (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_signctx (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_verify (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_get_verify_recover (3osslssl-3)
- manipulating EVP_PKEY_METHOD ...
- EVP_PKEY_meth_get_verifyctx (3osslssl-3)
- manipulating EVP_PKEY_METHOD struc...
- EVP_PKEY_meth_new (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_remove (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_check (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_cleanup (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_copy (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_ctrl (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_decrypt (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_derive (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_digest_custom (3osslssl-3)
- manipulating EVP_PKEY_METHOD s...
- EVP_PKEY_meth_set_digestsign (3osslssl-3)
- manipulating EVP_PKEY_METHOD stru...
- EVP_PKEY_meth_set_digestverify (3osslssl-3)
- manipulating EVP_PKEY_METHOD st...
- EVP_PKEY_meth_set_encrypt (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_init (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_keygen (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_param_check (3osslssl-3)
- manipulating EVP_PKEY_METHOD str...
- EVP_PKEY_meth_set_paramgen (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_public_check (3osslssl-3)
- manipulating EVP_PKEY_METHOD st...
- EVP_PKEY_meth_set_sign (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_signctx (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_verify (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_meth_set_verify_recover (3osslssl-3)
- manipulating EVP_PKEY_METHOD ...
- EVP_PKEY_meth_set_verifyctx (3osslssl-3)
- manipulating EVP_PKEY_METHOD struc...
- EVP_PKEY_METHOD (3osslssl-3)
- manipulating EVP_PKEY_METHOD structure
- EVP_PKEY_new (3osslssl-3)
- public/private key allocation and raw key handlin...
- EVP_PKEY_pairwise_check (3osslssl-3)
- key and parameter validation functions
- EVP_PKEY_param_check (3osslssl-3)
- key and parameter validation functions
- EVP_PKEY_param_check_quick (3osslssl-3)
- key and parameter validation functions
- EVP_PKEY_paramgen (3osslssl-3)
- key and parameter generation and check funct...
- EVP_PKEY_paramgen_init (3osslssl-3)
- key and parameter generation and check ...
- EVP_PKEY_print_params (3osslssl-3)
- public key algorithm printing routines
- EVP_PKEY_print_params_fp (3osslssl-3)
- public key algorithm printing routines
- EVP_PKEY_print_private (3osslssl-3)
- public key algorithm printing routines
- EVP_PKEY_print_private_fp (3osslssl-3)
- public key algorithm printing routines
- EVP_PKEY_print_public (3osslssl-3)
- public key algorithm printing routines
- EVP_PKEY_print_public_fp (3osslssl-3)
- public key algorithm printing routines
- EVP_PKEY_private_check (3osslssl-3)
- key and parameter validation functions
- EVP_PKEY_public_check (3osslssl-3)
- key and parameter validation functions
- EVP_PKEY_public_check_quick (3osslssl-3)
- key and parameter validation funct...
- EVP_PKEY_Q_keygen (3osslssl-3)
- key and parameter generation and check funct...
- EVP_PKEY_set1_DH (3osslssl-3)
- EVP_PKEY assignment functions
- EVP_PKEY_set_type (3osslssl-3)
- functions to change the EVP_PKEY type
- EVP_PKEY_set_type_by_keymgmt (3osslssl-3)
- functions to change the EVP_PKEY ...
- EVP_PKEY_set_type_str (3osslssl-3)
- functions to change the EVP_PKEY type
- EVP_PKEY_sign (3osslssl-3)
- sign using a public key algorithm
- EVP_PKEY_sign_init (3osslssl-3)
- sign using a public key algorithm
- EVP_PKEY_sign_init_ex (3osslssl-3)
- sign using a public key algorithm
- EVP_PKEY_up_ref (3osslssl-3)
- public/private key allocation and raw key hand...
- EVP_RAND-CTR-DRBG (7osslssl-3)
- The CTR DRBG EVP_RAND implementation
- EVP_RAND-HASH-DRBG (7osslssl-3)
- The HASH DRBG EVP_RAND implementation
- EVP_RAND-HMAC-DRBG (7osslssl-3)
- The HMAC DRBG EVP_RAND implementation
- EVP_RAND-SEED-SRC (7osslssl-3)
- The randomness seed source EVP_RAND implemen...
- EVP_RAND-TEST-RAND (7osslssl-3)
- The test EVP_RAND implementation
- EVP_RAND_fetch (3osslssl-3)
- EVP RAND routines
- EVP_RAND_get_strength (3osslssl-3)
- EVP RAND routines
- EVP_rc2_40_cbc (3osslssl-3)
- EVP RC2 cipher
- EVP_rc2_64_cbc (3osslssl-3)
- EVP RC2 cipher
- EVP_rc2_cbc (3osslssl-3)
- EVP RC2 cipher
- EVP_rc2_cfb (3osslssl-3)
- EVP RC2 cipher
- EVP_rc2_cfb64 (3osslssl-3)
- EVP RC2 cipher
- EVP_rc2_ecb (3osslssl-3)
- EVP RC2 cipher
- EVP_rc2_ofb (3osslssl-3)
- EVP RC2 cipher
- EVP_rc4 (3osslssl-3)
- EVP RC4 stream cipher
- EVP_rc4_40 (3osslssl-3)
- EVP RC4 stream cipher
- EVP_rc4_hmac_md5 (3osslssl-3)
- EVP RC4 stream cipher
- EVP_rc5_32_12_16_cbc (3osslssl-3)
- EVP RC5 cipher
- EVP_rc5_32_12_16_cfb (3osslssl-3)
- EVP RC5 cipher
- EVP_rc5_32_12_16_cfb64 (3osslssl-3)
- EVP RC5 cipher
- EVP_rc5_32_12_16_ecb (3osslssl-3)
- EVP RC5 cipher
- EVP_rc5_32_12_16_ofb (3osslssl-3)
- EVP RC5 cipher
- EVP_seed_cbc (3osslssl-3)
- EVP SEED cipher
- EVP_seed_cfb (3osslssl-3)
- EVP SEED cipher
- EVP_seed_cfb128 (3osslssl-3)
- EVP SEED cipher
- EVP_seed_ecb (3osslssl-3)
- EVP SEED cipher
- EVP_seed_ofb (3osslssl-3)
- EVP SEED cipher
- EVP_sha1 (3osslssl-3)
- SHA-1 For EVP
- EVP_sha224 (3osslssl-3)
- SHA-2 For EVP
- EVP_sha256 (3osslssl-3)
- SHA-2 For EVP
- EVP_sha384 (3osslssl-3)
- SHA-2 For EVP
- EVP_sha3_224 (3osslssl-3)
- SHA-3 For EVP
- EVP_sha3_256 (3osslssl-3)
- SHA-3 For EVP
- EVP_sha3_384 (3osslssl-3)
- SHA-3 For EVP
- EVP_sha3_512 (3osslssl-3)
- SHA-3 For EVP
- EVP_sha512 (3osslssl-3)
- SHA-2 For EVP
- EVP_sha512_224 (3osslssl-3)
- SHA-2 For EVP
- EVP_sha512_256 (3osslssl-3)
- SHA-2 For EVP
- EVP_shake128 (3osslssl-3)
- SHA-3 For EVP
- EVP_shake256 (3osslssl-3)
- SHA-3 For EVP
- EVP_SIGNATURE (3osslssl-3)
- Functions to manage EVP_SIGNATURE algorithm objects
- EVP_SIGNATURE-CMAC (7osslssl-3)
- The legacy EVP_PKEY MAC signature implement...
- EVP_SIGNATURE-DSA (7osslssl-3)
- The EVP_PKEY DSA signature implementation
- EVP_SIGNATURE-ECDSA (7osslssl-3)
- The EVP_PKEY ECDSA signature implementation.
- EVP_SIGNATURE-HMAC (7osslssl-3)
- The legacy EVP_PKEY MAC signature implement...
- EVP_SIGNATURE-Poly1305 (7osslssl-3)
- The legacy EVP_PKEY MAC signature imple...
- EVP_SIGNATURE-RSA (7osslssl-3)
- The EVP_PKEY RSA signature implementation
- EVP_SIGNATURE-Siphash (7osslssl-3)
- The legacy EVP_PKEY MAC signature implem...
- EVP_SIGNATURE_fetch (3osslssl-3)
- Functions to manage EVP_SIGNATURE algorith...
- EVP_SIGNATURE_free (3osslssl-3)
- Functions to manage EVP_SIGNATURE algorithm...
- EVP_SIGNATURE_is_a (3osslssl-3)
- Functions to manage EVP_SIGNATURE algorithm...
- EVP_sm4_cbc (3osslssl-3)
- EVP SM4 cipher
- EVP_sm4_cfb (3osslssl-3)
- EVP SM4 cipher
- EVP_sm4_cfb128 (3osslssl-3)
- EVP SM4 cipher
- EVP_sm4_ctr (3osslssl-3)
- EVP SM4 cipher
- EVP_sm4_ecb (3osslssl-3)
- EVP SM4 cipher
- EVP_sm4_ofb (3osslssl-3)
- EVP SM4 cipher
- EVP_whirlpool (3osslssl-3)
- WHIRLPOOL For EVP
- exa (4)
- new 2D acceleration architecture for X.Org
- urxvt-example-refresh-hooks-256color (1)
- example of how to use refresh hooks
- execute_in_process_context (9)
- reliably execute the routine with user context
- exfatfsck (8)
- check an exFAT file system
- exif (1)
- shows EXIF information in JPEG files
- exit (1p)
- cause the shell to exit
- exit (2)
- terminate the calling process
- exit (n)
- End the application
- exit_group (2)
- exit all threads in a process
- exo-open (1)
- Open URLs and launch preferred applications
- expand_number (3bsd)
- format a number from human readable form
- expect (1)
- programmed dialogue with interactive programs, Version 5
- expire (8)
- Usenet article and history expiration program
- expireover (8)
- Expire entries from the news overview database
- expirerm (8)
- Remove articles that have been expired
- expiry (1)
- check and enforce password expiration policy
- EXPLAIN (7pg161)
- show the execution plan of a statement
- export (1p)
- set the export attribute for variables
- Exporter (3)
- Implements default import method for modules
- Exporter::Heavy (3)
- Exporter guts
- ext_edirectory_userip_acl (8)
- Squid eDirectory IP Lookup Helper
- ext_ldap_group_acl (8)
- Squid LDAP external acl group helper
- ext_session_acl (8)
- Squid session tracking external acl helper.
- ext_time_quota_acl (8)
- Squid time quota external acl helper.
- ext_unix_group_acl (8)
- Squid UNIX Group ACL helper
- ext_wbinfo_group_acl (8)
- external ACL helper for Squid to verify NT Domain ...
- extcheck (1)
- Detects version conflicts between a target Java Archiv...
- extcheck-java-1.7.0-openjdk (1)
- A utility to detect jar conflicts
- extcheck-java-1.8.0-openjdk (1)
- Detects version conflicts between a target ...
- extendedopacity (5)
- theory of netpbm interpolation and extrapolation
- extlinux (1)
- install the SYSLINUX bootloader on a ext2/ext3 filesystem
- extractbb (1)
- extract bounding box information from graphics files
- extrusion (6x)
- various rotating extruded shapes.
- ExtUtils::Constant (3)
- generate XS code to import C header constants
- ExtUtils::Constant::Utils (3)
- helper functions for ExtUtils::Constant
- ExtUtils::Helpers (3)
- Various portability utilities for module builders
- ExtUtils::Helpers::Unix (3)
- Unix specific helper bits
- ExtUtils::Helpers::VMS (3)
- VMS specific helper bits
- ExtUtils::Helpers::Windows (3)
- Windows specific helper bits
- ExtUtils::InstallPaths (3)
- Build.PL install path logic made easy
- ExtUtils::Miniperl (3)
- write the C code for miniperlmain.c and perlmain.c
- ExtUtils::ParseXS::Utilities (3)
- Subroutines used with ExtUtils::ParseXS
- ExtUtils::PL2Bat (3)
- Batch file creation to run perl scripts on Windows
- ExtUtils::Typemaps::Cmd (3)
- Quick commands for handling typemaps
- ExtUtils::Typemaps::InputMap (3)
- Entry in the INPUT section of a typemap
- ExtUtils::Typemaps::OutputMap (3)
- Entry in the OUTPUT section of a typemap
- ExtUtils::Typemaps::Type (3)
- Entry in the TYPEMAP section of a typemap
- facade (n)
- Facade channel
- faccessat (2)
- check user's permissions for a file
- fadeplot (6x)
- draws a waving ribbon following a sinusoidal path.
- fail2ban-client (1)
- configure and control the server
- fail2ban-python (1)
- a helper for Fail2Ban to assure that the same Python i...
- fail2ban-server (1)
- start the server
- failsafe_context (5)
- The SELinux fail safe context configuration file
- faked (1)
- daemon that remembers fake ownership/permissions of fi...
- faked-sysv (1)
- daemon that remembers fake ownership/permissions of fi...
- faked-tcp (1)
- daemon that remembers fake ownership/permissions of fi...
- false (1)
- do nothing, unsuccessfully
- Fatal (3)
- Replace functions with equivalents which succeed or die
- fattach (2)
- unimplemented system calls
- fattach (3p)
- attach a STREAMS-based file descriptor to a file in th...
- ntp-keygen (1)
- Create a NTP host key
- ntp-wait (1)
- Wait for ntpd to stabilize the system clock
- fb_find_best_mode (9)
- find best matching videomode
- fb_match_mode (9)
- find a videomode which exactly matches the timings in var
- fb_set_cmap (9)
- set the colormap
- fbdevhw (4)
- os-specific submodule for framebuffer device access
- fblocked (n)
- Test whether the last input operation exhausted all av...
- fc (1p)
- process the command history list
- fc-cache (1)
- build font information cache files
- fc-cat (1)
- read font information cache files
- fc-conflist (1)
- list the configuration files processed by Fontconfig
- fc-match (1)
- match available fonts
- fc-pattern (1)
- parse and show pattern
- fc_block_scsi_eh (9)
- Block SCSI eh thread for blocked fc_rport
- fc_get_event_number (9)
- Obtain the next sequential FC event number
- fc_host_post_event (9)
- called to post an even on an fc_host.
- fc_host_post_vendor_event (9)
- called to post a vendor unique event on an fc...
- fc_remote_port_add (9)
- notify fc transport of the existence of a remote FC ...
- fc_remote_port_delete (9)
- notifies the fc transport that a remote port is n...
- fc_remote_port_rolechg (9)
- notifies the fc transport that the roles on a re...
- fc_remove_host (9)
- called to terminate any fc_transport-related elements ...
- FcAtomicReplaceOrig (3)
- replace original with new
- FcBlanksAdd (3)
- Add a character to an FcBlanks
- FcBlanksIsMember (3)
- Query membership in an FcBlanks
- FcCacheCopySet (3)
- Returns a copy of the fontset from cache
- FcCacheCreateTagFile (3)
- Create CACHEDIR.TAG at cache directory.
- FcCacheDir (3)
- Return directory of cache
- FcCacheNumFont (3)
- Returns the number of fonts in cache.
- FcCacheNumSubdir (3)
- Return the number of subdirectories in cache.
- FcCacheSubdir (3)
- Return the i'th subdirectory.
- FcCharSetAddChar (3)
- Add a character to a charset
- FcCharSetCopy (3)
- Copy a charset
- FcCharSetCount (3)
- Count entries in a charset
- FcCharSetCoverage (3)
- DEPRECATED return coverage for a Unicode page
- FcCharSetCreate (3)
- Create an empty character set
- FcCharSetDelChar (3)
- Add a character to a charset
- FcCharSetDestroy (3)
- Destroy a character set
- FcCharSetEqual (3)
- Compare two charsets
- FcCharSetFirstPage (3)
- Start enumerating charset contents
- FcCharSetHasChar (3)
- Check a charset for a char
- FcCharSetIntersect (3)
- Intersect charsets
- FcCharSetIntersectCount (3)
- Intersect and count charsets
- FcCharSetIsSubset (3)
- Test for charset inclusion
- FcCharSetMerge (3)
- Merge charsets
- FcCharSetNew (3)
- DEPRECATED alias for FcCharSetCreate
- FcCharSetNextPage (3)
- Continue enumerating charset contents
- FcCharSetSubtract (3)
- Subtract charsets
- FcCharSetSubtractCount (3)
- Subtract and count charsets
- FcCharSetUnion (3)
- Add charsets
- FcConfigEnableHome (3)
- controls use of the home directory.
- FcConfigFileInfoIterGet (3)
- Obtain the configuration file information
- FcConfigFileInfoIterInit (3)
- Initialize the iterator
- FcConfigFileInfoIterNext (3)
- Set the iterator to point to the next list
- FcConfigGetCache (3)
- DEPRECATED used to return per-user cache filename
- FcConfigGetCacheDirs (3)
- return the list of directories searched for cache ...
- FcConfigGetSysRoot (3)
- Obtain the system root directory
- FcConfigHome (3)
- return the current home directory.
- FcConfigSetSysRoot (3)
- Set the system root directory
- FcConfigSubstituteWithPat (3)
- Execute substitutions
- FcConfigUptoDate (3)
- Check timestamps on config files
- FcDirCacheClean (3)
- Clean up a cache directory
- FcDirCacheCreateUUID (3)
- Create .uuid file at a directory
- FcDirCacheDeleteUUID (3)
- Delete .uuid file
- FcDirCacheLoad (3)
- load a directory cache
- FcDirCacheLoadFile (3)
- load a cache file
- FcDirCacheRead (3)
- read or construct a directory cache
- FcDirCacheRescan (3)
- Re-scan a directory cache
- FcDirCacheUnlink (3)
- Remove all caches related to dir
- FcDirCacheUnload (3)
- unload a cache file
- FcDirCacheValid (3)
- check directory cache
- FcDirSave (3)
- DEPRECATED: formerly used to save a directory cache
- FcDirScan (3)
- scan a font directory without caching it
- FcFileIsDir (3)
- check whether a file is a directory
- FcFontMatch (3)
- Return best font
- FcFontSetMatch (3)
- Return the best font from a set of font sets
- FcFontSort (3)
- Return list of matching fonts
- FcFreeTypeCharIndex (3)
- map Unicode to glyph id
- FcFreeTypeCharSet (3)
- compute Unicode coverage
- FcFreeTypeCharSetAndSpacing (3)
- compute Unicode coverage and spacing type
- FcGetDefaultLangs (3)
- Get the default languages list
- fchdir (2)
- change working directory
- fchdir (3p)
- change working directory
- fchmod (2)
- change permissions of a file
- fchmod (3p)
- change mode of a file
- fchmodat (2)
- change permissions of a file
- fchmodat (3p)
- change mode of a file relative to directory file descr...
- fchown (2)
- change ownership of a file
- fchown (3p)
- change owner and group of a file
- fchown32 (2)
- change ownership of a file
- fchownat (2)
- change ownership of a file
- fchownat (3p)
- change owner and group of a file relative to directory...
- FcIsLower (3)
- check for lower case ASCII character
- FcIsUpper (3)
- check for upper case ASCII character
- fcitx (1)
- Free Chinese Input Toy of X - a Chinese IME for XIM
- FcLangGetCharSet (3)
- Get character map for a language
- FcLangNormalize (3)
- Normalize the language string
- FcLangSetContains (3)
- check langset subset relation
- FcLangSetEqual (3)
- test for matching langsets
- FcLangSetGetLangs (3)
- get the list of languages in the langset
- FcLangSetHash (3)
- return a hash value for a langset
- FcLangSetHasLang (3)
- test langset for language support
- FcMatrixShear (3)
- Shear a matrix
- FcNameConstant (3)
- Get the value for a symbolic constant
- FcNameUnparse (3)
- Convert a pattern back into a string that can be parsed
- fcntl.h (0p)
- file control options
- fcntl_getlease (9)
- Enquire what lease is currently active
- fconfigure (n)
- Set and get options on a channel
- fcopy (n)
- Copy data from one channel to another
- FcPatternAddWeak (3)
- Add a value to a pattern with weak binding
- FcPatternFilter (3)
- Filter the objects of pattern
- FcPatternFindIter (3)
- Set the iterator to point to the object in the pattern
- FcPatternGetWithBinding (3)
- Return a value with binding from a pattern
- FcPatternHash (3)
- Compute a pattern hash value
- FcPatternIterGetObject (3)
- Returns an object name which the iterator point to
- FcPatternIterGetValue (3)
- Returns a value which the iterator point to
- FcPatternIterIsValid (3)
- Check whether the iterator is valid or not
- FcPatternIterStart (3)
- Initialize the iterator with the first iterator in t...
- FcPatternIterValueCount (3)
- Returns the number of the values which the iter...
- FcPatternObjectCount (3)
- Returns the number of the object
- FcPatternRemove (3)
- Remove one object of the specified type from the pattern
- FcRangeGetDouble (3)
- Get the range in double
- FcStrBuildFilename (3)
- Concatenate strings as a file path
- FcStrCopyFilename (3)
- create a complete path from a filename
- FcStrSetEqual (3)
- check sets for equality
- FcStrSetMember (3)
- check set for membership
- FcUtf16Len (3)
- count UTF-16 encoded chars
- FcUtf8Len (3)
- count UTF-8 encoded chars
- FcWeightFromOpenType (3)
- Convert from OpenType weight values to fontconfig ...
- FcWeightFromOpenTypeDouble (3)
- Convert from OpenType weight values to fontc...
- FcWeightToOpenType (3)
- Convert from fontconfig weight values to OpenType ones
- FcWeightToOpenTypeDouble (3)
- Convert from fontconfig weight values to OpenT...
- fd0ssh (1)
- pipe for password-over-stdin support to ssh
- fd_to_handle (3)
- file handle operations
- fdatasync (2)
- synchronize a file's in-core state with storage device
- fdatasync (3p)
- synchronize the data of a file (REALTIME)
- fdetach (2)
- unimplemented system calls
- fdetach (3p)
- detach a name from a STREAMS-based file descriptor (ST...
- fdopen (3p)
- associate a stream with a file descriptor
- fdopendir (3p)
- open directory associated with file descriptor
- fdp (1)
- filter for drawing undirected graphs
- fdrawcmd (1)
- send raw commands to the floppy disk controller
- feclearexcept (3)
- floating-point rounding and exception handling
- fedisableexcept (3)
- floating-point rounding and exception handling
- feenableexcept (3)
- floating-point rounding and exception handling
- fegetenv (3)
- floating-point rounding and exception handling
- fegetexcept (3)
- floating-point rounding and exception handling
- fegetexceptflag (3)
- floating-point rounding and exception handling
- fegetround (3)
- floating-point rounding and exception handling
- feholdexcept (3)
- floating-point rounding and exception handling
- feholdexcept (3p)
- save current floating-point environment
- fenv (3)
- floating-point rounding and exception handling
- fenv.h (0p)
- floating-point environment
- feof (3)
- check and reset stream status
- feraiseexcept (3)
- floating-point rounding and exception handling
- ferror (3)
- check and reset stream status
- fesetenv (3)
- floating-point rounding and exception handling
- fesetexceptflag (3)
- floating-point rounding and exception handling
- fesetround (3)
- floating-point rounding and exception handling
- FETCH (7pg161)
- retrieve rows from a query using a cursor
- fetchmail (1)
- fetch mail from a POP, IMAP, ETRN, or ODMR-capable server
- fetchmailconf (1)
- fetch mail from a POP, IMAP, ETRN, or ODMR-capable server
- fetestexcept (3)
- floating-point rounding and exception handling
- feupdateenv (3)
- floating-point rounding and exception handling
- FFI::CheckLib (3)
- Check that a library is available for FFI
- ffi_prep_cif-4.8 (3)
- Prepare a ffi_cif structure for use with ffi_call
- ffi_prep_cif_var-4.8 (3)
- Prepare a ffi_cif structure for use with ffi_call ...
- fflush (3)
- flush a stream
- fflush (3p)
- flush a stream
- fflush_unlocked (3)
- nonlocking stdio functions
- fg (1p)
- run jobs in the foreground
- fgconsole (1)
- print the number of the active VT.
- fgetc (3)
- input of characters and strings
- fgets (3)
- input of characters and strings
- fgetspent (3)
- get shadow password file entry
- fgetspent_r (3)
- get shadow password file entry
- fgetwc (3)
- read a wide character from a FILE stream
- fgetwc (3p)
- get a wide-character code from a stream
- fgetwln (3bsd)
- get a line of wide characters from a stream
- fgetws (3)
- read a wide-character string from a FILE stream
- fgetws (3p)
- get a wide-character string from a stream
- fgrep (1)
- print lines matching a pattern
- field_info (3form)
- retrieve field characteristics
- field_init (3form)
- set hooks for automatic invocation by applications
- field_just (3form)
- retrieve field characteristics
- field_term (3form)
- set hooks for automatic invocation by applications
- field_userptr (3form)
- associate application data with a form field
- fifo (n)
- In-memory fifo channel
- fifo2 (n)
- In-memory interconnected fifo channels
- fig2dev (1x)
- translates Fig code to various graphics languages
- File::BaseDir (3)
- Use the Freedesktop.org base directory specification
- File::Basename (3)
- Parse file paths into directory, filename and suffix.
- File::chdir (3)
- a more sensible way to change directories
- File::Compare (3)
- Compare files or filehandles
- File::Copy (3)
- Copy files or filehandles
- File::DesktopEntry (3)
- Object to handle .desktop files
- File::DosGlob (3)
- DOS like globbing and then some
- File::Fetch (3)
- A generic file fetching mechanism
- File::HomeDir (3pm)
- Find your home and other directories on any platform
- File::HomeDir::Darwin (3pm)
- Find your home and other directories on Darwin ...
- File::HomeDir::Darwin::Carbon (3pm)
- Find your home and other directories on...
- File::HomeDir::Darwin::Cocoa (3pm)
- Find your home and other directories on ...
- File::HomeDir::Driver (3pm)
- Base class for all File::HomeDir drivers
- File::HomeDir::FreeDesktop (3pm)
- Find your home and other directories on Fr...
- File::HomeDir::MacOS9 (3pm)
- Find your home and other directories on legacy ...
- File::HomeDir::Test (3pm)
- Prevent the accidental creation of user-owned fil...
- File::HomeDir::Unix (3pm)
- Find your home and other directories on legacy Unix
- File::HomeDir::Windows (3pm)
- Find your home and other directories on Windows
- File::IconTheme (3)
- Find icon directories
- File::MimeInfo (3)
- Determine file type from the file name
- File::MimeInfo::Magic (3)
- Determine file type with magic
- File::Path (3)
- Create or remove directory trees
- File::pushd (3pm)
- change directory temporarily for a limited scope
- File::Spec::Cygwin (3)
- methods for Cygwin file specs
- File::Spec::Epoc (3)
- methods for Epoc file specs
- File::Spec::OS2 (3)
- methods for OS/2 file specs
- File::Spec::Unix (3)
- File::Spec for Unix, base for other File::Spec modules
- File::Spec::VMS (3)
- methods for VMS file specs
- File::Spec::Win32 (3)
- methods for Win32 file specs
- File::Temp (3)
- return name and handle of a temporary file safely
- file_contexts.homedirs (5)
- userspace SELinux labeling interface and configu...
- FileCache (3)
- keep more files open than the system permits
- filechan (8)
- file-writing backend for InterNetNews
- fileevent (n)
- Execute a script when a channel becomes readable or wr...
- FileHandle (3)
- supply object methods for filehandles
- filemap_fault (9)
- read in file data for page fault handling
- filemap_flush (9)
- mostly a non-blocking flush
- fileno (3)
- check and reset stream status
- fileschanged (1)
- displays altered files
- filetest (3)
- Perl pragma to control the filetest permission operators
- multi (n)
- Multi-file operation, scatter/gather, standard object
- multiop (n)
- Multi-file operation, scatter/gather
- fillup (8)
- the SuSE tool for merging config files
- filter-a (8)
- filter A in DNS responses when AAAA is present
- filter-aaaa (8)
- filter AAAA in DNS responses when A is present
- find (1)
- search for files in a directory hierarchy
- find (n)
- search for classes and objects
- find_busiest_group (9)
- Returns the busiest group within the sched_domain if...
- find_get_entry (9)
- find and get a page cache entry
- find_get_pages_contig (9)
- gang contiguous pagecache lookup
- find_get_pages_tag (9)
- find and return pages that match tag
- find_lock_entry (9)
- locate, pin and lock a page cache entry
- find_min_pfn_with_active_regions (9)
- Find the minimum PFN registered
- find_next_best_node (9)
- find the next node that should appear in a given no...
- findaffix (1)
- Interactive spelling checking
- findhyph (1)
- find words hyphenated by TeX in a document
- findsmb (1)
- list info about machines that respond to SMB name quer...
- fini_selinuxmnt (3)
- initialize the global variable selinux_mnt
- finish_wait (9)
- clean up after waiting in a queue
- firefox (1)
- a Web browser for X11 derived from the Mozilla browser
- fireworkx (6x)
- pyrotechnic explosions eye-candy.
- fish (1)
- the friendly interactive shell
- fish (6)
- play "Go Fish"
- fish_indent (1)
- indenter and prettifier
- fish_key_reader (1)
- explore what characters keyboard keys send
- fix_small_imbalance (9)
- Calculate the minor imbalance that exists amongst t...
- fixdlsrps (1)
- filter to fix DviLaser/PS documents to work with PSUtils
- fixmacps (1)
- filter to fix Macintosh documents with saner version o...
- fixproc (1)
- Fixes a process by performing the specified action.
- fixtpps (1)
- filter to fix Tpscript documents to work with PSUtils
- fiz (1)
- analyze damaged zoo archive for data revovery
- flash (3ncurses)
- curses bell and screen flash routines
- flash_sp (3ncurses)
- curses screen-pointer extension
- flex (1)
- the fast lexical analyser generator
- flipdiff (1)
- exchange the order of two incremental patches
- flipflop (6x)
- draws a grid of 3D squares that change positions
- flipscreen3d (6x)
- rotates an image of the screen through 3 dimensions.
- fliptext (6x)
- draws pages of text whose lines transparently flip around
- float.h (0p)
- floating types
- flock (1)
- manage locks from shell scripts
- floor (3)
- largest integral value not greater than argument
- floorf (3)
- largest integral value not greater than argument
- floorl (3)
- largest integral value not greater than argument
- fltk (3)
- the fast light tool kit
- fltk-config (1)
- script to get information about the installed version ...
- fluid (1)
- the fast light user-interface designer
- fluidballs (6x)
- the physics of bouncing balls.
- flush (8)
- Postfix fast flush server
- flush (n)
- Flush buffered output for a channel
- flush_delayed_work (9)
- wait for a dwork to finish executing the last queueing
- flush_kthread_work (9)
- flush a kthread_work
- flush_kthread_worker (9)
- flush all current works on a kthread_worker
- flush_scheduled_work (9)
- ensure that any scheduled work has run to completion.
- flush_work (9)
- wait for a work to finish executing the last queueing ...
- flush_workqueue (9)
- ensure that any scheduled work has run to completion.
- flushinp (3ncurses)
- miscellaneous curses utility routines
- flushinp_sp (3ncurses)
- curses screen-pointer extension
- fmtcheck (3bsd)
- sanitizes user-supplied printf(3)-style format string
- fmtmsg (3p)
- display a message in the specified format on standard ...
- fmtmsg.h (0p)
- message display structures
- fnmatch (3)
- match filename or pathname
- fnmatch (3am)
- compare a string against a filename wildcard
- fnmatch (3p)
- match a filename string or a pathname
- fnmatch.h (0p)
- filename-matching types
- focus (n)
- Manage the input focus
- fold (1)
- wrap each input line to fit in specified width
- FontCacheChangeCacheSettings (3)
- X-TrueType font cache extension client lib...
- FontCacheGetCacheSettings (3)
- X-TrueType font cache extension client library
- FontCacheGetCacheStatistics (3)
- X-TrueType font cache extension client library
- FontCacheQueryExtension (3)
- X-TrueType font cache extension client library
- FontCacheQueryVersion (3)
- X-TrueType font cache extension client library
- fontchooser (n)
- control font selection dialog
- fontglide (6x)
- characters float onto the screen to form words
- for_each_dtlb_entry (9)
- Iterate over free (non-wired) DTLB entries
- for_each_itlb_entry (9)
- Iterate over free (non-wired) ITLB entries
- foreach (n)
- Iterate over all elements in one or more lists
- fork (2)
- create a child process
- form_driver (3form)
- command-processing loop of the form system
- form_field_info (3form)
- retrieve field characteristics
- form_field_just (3form)
- retrieve field characteristics
- form_field_userptr (3form)
- associate application data with a form field
- form_hook (3form)
- set hooks for automatic invocation by applications
- form_init (3form)
- set hooks for automatic invocation by applications
- form_request_by_name (3form)
- handle printable form request names
- form_request_name (3form)
- handle printable form request names
- form_requestname (3form)
- handle printable form request names
- form_term (3form)
- set hooks for automatic invocation by applications
- form_userptr (3form)
- associate application data with a form item
- format (n)
- Format a string in the style of sprintf
- fortune (6)
- print a random, hopefully interesting, adage
- fparseln (3bsd)
- return the next logical line from a stream
- fpathconf (3)
- get configuration values for files
- fpathconf (3p)
- get configurable pathname variables
- fpurge (3bsd)
- flush a stream
- fputc (3)
- output of characters and strings
- fputs (3)
- output of characters and strings
- fputwc (3)
- write a wide character to a FILE stream
- fputwc (3p)
- put a wide-character code on a stream
- fputws (3)
- write a wide-character string to a FILE stream
- fputws (3p)
- put a wide-character string on a stream
- fragiso (8)
- split rpm packages from an iso and reassemble the iso ...
- free (1)
- Display amount of free and used memory in the system
- free_bootmem_with_active_regions (9)
- Call memblock_free_early_nid for each ...
- free_dma (9)
- free a reserved system DMA channel
- free_handle (3)
- file handle operations
- free_hugepages (2)
- allocate or free huge pages
- free_irq (9)
- free an interrupt allocated with request_irq
- free_rs (9)
- Free the rs control structure, if it is no longer used
- freehostent (3)
- get network hostnames and addresses
- Mail::SpamAssassin::Plugin::FreeMail (3)
- check message headers/body for fre...
- freeze_super (9)
- lock the filesystem and force it into a consistent state
- freq_reg_info (9)
- get regulatory information for the given frequency
- freshclam (1)
- update virus databases
- freshclam.conf (5)
- Configuration file for Clam AntiVirus database update ...
- fribidi_charset_to_unicode (3)
- convert string to Unicode
- fribidi_get_bidi_type (3)
- get character bidi type
- fribidi_get_bidi_types (3)
- get bidi types for an string of characters
- fribidi_get_bracket (3)
- get bracketed character
- fribidi_get_bracket_types (3)
- get bracketed characters
- fribidi_get_joining_type (3)
- get character joining type
- fribidi_get_joining_types (3)
- get joining types for an string of characters
- fribidi_get_mirror_char (3)
- get mirrored character
- fribidi_get_par_direction (3)
- get base paragraph direction
- fribidi_get_par_embedding_levels (3)
- get bidi embedding levels of a paragraph
- fribidi_get_type (3)
- get character bidi type
- fribidi_get_type_internal (3)
- get character bidi type
- fribidi_parse_charset (3)
- parse character set name
- fribidi_shape (3)
- do bidi-aware shaping
- fribidi_shape_arabic (3)
- do Arabic shaping
- fribidi_shape_mirroring (3)
- do mirroring shaping
- fribidi_unicode_to_charset (3)
- convert string from Unicode
- fsadm (8)
- utility to resize or check filesystem on a device
- fsck (8)
- check and repair a Linux filesystem
- fsck.exfat (8)
- check an exFAT file system
- fsck.ext2 (8)
- check a Linux ext2/ext3/ext4 file system
- fsck.ext3 (8)
- check a Linux ext2/ext3/ext4 file system
- fsck.ext4 (8)
- check a Linux ext2/ext3/ext4 file system
- fsck.fat (8)
- check and repair MS-DOS filesystems
- fsck.minix (8)
- check consistency of Minix filesystem
- fsck.msdos (8)
- check and repair MS-DOS filesystems
- fsck.vfat (8)
- check and repair MS-DOS filesystems
- fsck.xfs (8)
- do nothing, successfully
- fssetdm_by_handle (3)
- file handle operations
- fstab (5)
- static information about the filesystems
- fstab-decode (8)
- run a command with fstab-encoded arguments
- fsync (1)
- synchronize the specified file with storage device
- fsync (2)
- synchronize a file's in-core state with storage device
- fsync (3p)
- synchronize changes to a file
- ftok (3)
- convert a pathname and a project identifier to a Syste...
- ftp (n)
- Client-side tcl implementation of the ftp protocol
- ftp_geturl (n)
- Uri handler for ftp urls
- ftpusers (5)
- list of users that may not log in via the FTP daemon
- ftruncate (2)
- truncate a file to a specified length
- ftruncate (3p)
- truncate a file to a specified length
- ftruncate64 (2)
- truncate a file to a specified length
- fts (3)
- traverse a file hierarchy
- fts_children (3)
- traverse a file hierarchy
- fts_close (3)
- traverse a file hierarchy
- fts_open (3)
- traverse a file hierarchy
- fts_read (3)
- traverse a file hierarchy
- fts_set (3)
- traverse a file hierarchy
- ftw.h (0p)
- file tree traversal
- fulla (1)
- Correct lens distortion, vignetting and chromatic aber...
- funzip (1)
- filter for extracting from a ZIP archive in a pipe
- mount.fuse (8)
- format and options for the fuse file systems
- fuser (1p)
- list process IDs of all processes that have one or mor...
- futex_proxy_trylock_atomic (9)
- Attempt an atomic lock for the top waiter
- futex_top_waiter (9)
- Return the highest priority waiter on a futex
- utimensat (2)
- change file timestamps with nanosecond precision
- futimens (3)
- change file timestamps with nanosecond precision
- futimes (3)
- change file timestamps
- futimesat (2)
- change timestamps of a file relative to a directory fi...
- fuzzyflakes (6x)
- falling snowflakes/flower shapes
- fwide (3)
- set and determine the orientation of a FILE stream
- fwprintf (3)
- formatted wide-character output conversion
- fwprintf (3p)
- print formatted wide-character output
- fwscanf (3p)
- convert formatted wide-character input
- g-ir-scanner (1)
- extracting C metadata from sources and headers
- gacutil (1)
- Global Assembly Cache management utility.
- gadget_is_dualspeed (9)
- return true iff the hardware handles high speed
- gadget_is_otg (9)
- return true iff the hardware is OTG-ready
- gadget_is_superspeed (9)
- return true if the hardware handles superspeed
- gai_cancel (3)
- asynchronous network address and service translation
- gai_error (3)
- asynchronous network address and service translation
- gai_suspend (3)
- asynchronous network address and service translation
- gamma (3)
- (logarithm of the) gamma function
- gammaf (3)
- (logarithm of the) gamma function
- gammal (3)
- (logarithm of the) gamma function
- gapplication (1)
- D-Bus application launcher
- gc (1)
- count graph components
- gcj-4.9 (1)
- Ahead-of-time compiler for the Java language
- gcjh-4.9 (1)
- - generate header files from Java class files
- gdb (1)
- The GNU Debugger
- GDBM_File (3)
- Perl5 access to the gdbm library.
- gdbus (1)
- Tool for working with D-Bus objects
- gencnval (1)
- compile the converters aliases file
- generic_make_request (9)
- hand a buffer to its device driver for I/O
- generic_permission (9)
- check for access rights on a Posix-like filesystem
- generic_pipe_buf_confirm (9)
- verify contents of the pipe buffer
- generic_pipe_buf_steal (9)
- attempt to take ownership of a pipe_buffer
- generic_shutdown_super (9)
- common helper for - >kill_sb
- generic_writepages (9)
- walk the list of dirty pages of the given address sp...
- genhomedircon (8)
- generate SELinux file context configuration entries fo...
- genisoimage (1)
- create ISO9660/Joliet/HFS filesystem with optional Roc...
- genphy_aneg_done (9)
- return auto-negotiation status
- genphy_config_advert (9)
- sanitize and advertise auto-negotiation parameters
- genphy_config_aneg (9)
- restart auto-negotiation or write BMCR
- genphy_read_status (9)
- check the link status and update current link state
- genphy_restart_aneg (9)
- Enable and Restart Autonegotiation
- genphy_setup_forced (9)
- configures/forces speed/duplex from phydev
- genphy_soft_reset (9)
- software reset the PHY via BMCR_RESET bit
- genphy_update_link (9)
- update link status in phydev
- genscript (1)
- convert text files to PostScript, HTML, RTF, ANSI, and...
- geodesic (6x)
- animates a mesh geodesic sphere.
- Geography::Countries (3)
- 2-letter, 3-letter, and numerical codes for countr...
- geoiplookup (1)
- look up country using IP Address or hostname
- geoiplookup6 (1)
- look up country using IP Address or hostname
- geoipupdate (1)
- a program for updating the MaxMind GeoIP databases
- get_default_context_with_level (3)
- determine SELinux context(s) for user se...
- get_default_context_with_role (3)
- determine SELinux context(s) for user ses...
- get_default_context_with_rolelevel (3)
- determine SELinux context(s) for use...
- get_escdelay (3ncurses)
- curses thread support
- get_futex_key (9)
- Get parameters which are the keys for a futex
- get_ordered_context_list_with_level (3)
- determine SELinux context(s) for us...
- get_pfn_range_for_nid (9)
- Return the start and end page frames for a node
- get_pfnblock_flags_mask (9)
- Return the requested group of flags for the pag...
- get_phy_c45_ids (9)
- reads the specified addr for its 802.3-c45 IDs.
- get_phy_device (9)
- reads the specified PHY device and returns its phy_dev...
- get_phy_id (9)
- reads the specified addr for its ID.
- get_sd_load_idx (9)
- Obtain the load index for a given sched domain.
- get_state_synchronize_rcu (9)
- Snapshot current RCU state
- get_super (9)
- get the superblock of a device
- get_super_thawed (9)
- get thawed superblock of a device
- get_thread_area (2)
- get a thread-local storage (TLS) area
- get_wch (3ncurses)
- get (or push back) a wide character from curses termin...
- get_wstr (3ncurses)
- get an array of wide characters from a curses terminal...
- getaddrinfo_a (3)
- asynchronous network address and service translation
- getauxval (3)
- retrieve a value from the auxiliary vector
- getc (3)
- input of characters and strings
- getc_unlocked (3p)
- stdio with explicit client locking
- getcchar (3ncurses)
- Get a wide character string and rendition from a cchar...
- getch (3ncurses)
- get (or push back) characters from curses terminal key...
- getchar (3)
- input of characters and strings
- getchar (3p)
- get a byte from a stdin stream
- getchar_unlocked (3)
- nonlocking stdio functions
- getchar_unlocked (3p)
- stdio with explicit client locking
- getcifsacl (1)
- Userspace helper to display an ACL in a security descr...
- getcontext (2)
- get or set the user context
- getcontext (3)
- get or set the user context
- getcpu (2)
- determine CPU and NUMA node on which the calling threa...
- getcwd (3p)
- get the pathname of the current working directory
- getegid (3p)
- get the effective group ID
- getenforce (8)
- get the current mode of SELinux
- getent (1)
- get entries from Name Service Switch libraries
- geteuid (3p)
- get the effective user ID
- getexeccon (3)
- get or set the SELinux security context used for execu...
- getexeccon_raw (3)
- get or set the SELinux security context used for execu...
- getfdprm (1)
- print the current format information
- getfilename (1)
- Ask the user to name a file in a given format
- getfscreatecon (3)
- get or set the SELinux security context used for creat...
- getfscreatecon_raw (3)
- get or set the SELinux security context used for cre...
- getfsent (3)
- handle fstab entries
- getfsfile (3)
- handle fstab entries
- getfsspec (3)
- handle fstab entries
- getgid (3p)
- get the real group ID
- getgrent (3p)
- get the group database entry
- getgrnam (3p)
- search group database for a name
- getgrouplist (3)
- get list of groups to which a user belongs
- gethostbyaddr (3)
- get network host entry
- gethostbyaddr_r (3)
- get network host entry
- gethostbyname (3)
- get network host entry
- gethostbyname2 (3)
- get network host entry
- gethostbyname2_r (3)
- get network host entry
- gethostbyname_r (3)
- get network host entry
- gethostent (3)
- get network host entry
- gethostent (3p)
- network host database functions
- gethostent_r (3)
- get network host entry
- gethostid (2)
- get or set the unique identifier of the current host
- gethostid (3)
- get or set the unique identifier of the current host
- gethostid (3p)
- get an identifier for the current host
- gethostip (1)
- convert an IP address into various formats
- gethostname (2)
- get/set hostname
- gethostname (3p)
- get name of current host
- getipnodebyaddr (3)
- get network hostnames and addresses
- getipnodebyname (3)
- get network hostnames and addresses
- getkeycreatecon (3)
- get or set the SELinux security context used for creat...
- getkeycreatecon_raw (3)
- get or set the SELinux security context used for cr...
- GetLanConfigPages (9)
- Fetch LANConfig pages.
- getmouse (3ncurses)
- mouse interface through curses
- getn_wstr (3ncurses)
- get an array of wide characters from a curses terminal...
- getnetgrent (3)
- handle network group entries
- getnetgrent_r (3)
- handle network group entries
- getnstr (3ncurses)
- accept character strings from curses terminal keyboard
- getopt (1)
- parse command options (enhanced)
- Getopt::Std (3)
- Process single-character switches with switch clustering
- getparentpaths_by_handle (3)
- file handle operations
- getparents_by_handle (3)
- file handle operations
- getpeereid (3bsd)
- get the effective credentials of a UNIX-domain peer
- getpeername (3p)
- get the name of the peer socket
- getpgid (3p)
- get the process group ID for a process
- getpgrp (3p)
- get the process group ID of the calling process
- getpid (3p)
- get the process ID
- getppid (3p)
- get the parent process ID
- getpriority (2)
- get/set program scheduling priority
- getpriority (3p)
- get and set the nice value
- getprogname (3bsd)
- get or set the program name
- getpt (3)
- open the pseudoterminal master (PTM)
- getpwnam (3p)
- search user database for a name
- getpwuid (3p)
- search user database for a user ID
- gets (n)
- Read a line from a channel
- getsid (3p)
- get the process group ID of a session leader
- getsockcreatecon (3)
- get or set the SELinux security context used for creat...
- getsockcreatecon_raw (3)
- get or set the SELinux security context used for c...
- getsockname (3p)
- get the socket name
- getsockopt (3p)
- get the socket options
- getspent (3)
- get shadow password file entry
- getspent_r (3)
- get shadow password file entry
- getspnam (3)
- get shadow password file entry
- getspnam_r (3)
- get shadow password file entry
- getstr (3ncurses)
- accept character strings from curses terminal keyboard
- gettid (2)
- get thread identification
- gettimeofday (3p)
- get the date and time
- getunimap (8)
- dump the unicode map for the current console to stdout
- getunwind (2)
- copy the unwind data to caller's buffer
- getusershell (3)
- get permitted user shells
- getwc (3)
- read a wide character from a FILE stream
- getwc (3p)
- get a wide character from a stream
- getwchar (3)
- read a wide character from standard input
- getwchar (3p)
- get a wide character from a stdin stream
- getwchar_unlocked (3)
- nonlocking stdio functions
- gflux (6x)
- rippling surface graphics hack
- gftodvi (1)
- make proof sheets from generic font files
- gftype (1)
- translate a generic font file for humans to read
- gfxboot (8)
- graphical boot screen test and config tool
- gio-querymodules (1)
- GIO module cache creation
- git (1)
- the stupid content tracker
- git-add (1)
- Add file contents to the index
- git-am (1)
- Apply a series of patches from a mailbox
- git-annotate (1)
- Annotate file lines with commit information
- git-apply (1)
- Apply a patch to files and/or to the index
- git-archimport (1)
- Import a GNU Arch repository into Git
- git-archive (1)
- Create an archive of files from a named tree
- git-bisect (1)
- Use binary search to find the commit that introduced a...
- git-blame (1)
- Show what revision and author last modified each line ...
- git-branch (1)
- List, create, or delete branches
- git-bundle (1)
- Move objects and refs by archive
- git-check-attr (1)
- Display gitattributes information
- git-check-ignore (1)
- Debug gitignore / exclude files
- git-check-mailmap (1)
- Show canonical names and email addresses of contacts
- git-check-ref-format (1)
- Ensures that a reference name is well formed
- git-checkout (1)
- Switch branches or restore working tree files
- git-checkout-index (1)
- Copy files from the index to the working tree
- git-cherry (1)
- Find commits yet to be applied to upstream
- git-cherry-pick (1)
- Apply the changes introduced by some existing commits
- git-citool (1)
- Graphical alternative to git-commit
- git-clean (1)
- Remove untracked files from the working tree
- git-commit (1)
- Record changes to the repository
- git-commit-graph (1)
- Write and verify Git commit-graph files
- git-count-objects (1)
- Count unpacked number of objects and their disk consu...
- git-credential-cache (1)
- Helper to temporarily store passwords in memory
- git-credential-cache--daemon (1)
- Temporarily store user credentials in memory
- git-credential-store (1)
- Helper to store credentials on disk
- git-cvsexportcommit (1)
- Export a single commit to a CVS checkout
- git-cvsimport (1)
- Salvage your data out of another SCM people love to hate
- git-describe (1)
- Give an object a human readable name based on an avail...
- git-diagnose (1)
- Generate a zip archive of diagnostic information
- git-diff (1)
- Show changes between commits, commit and working tree,...
- git-diff-files (1)
- Compares files in the working tree and the index
- git-diff-index (1)
- Compare a tree to the working tree or index
- git-diff-tree (1)
- Compares the content and mode of blobs found via two t...
- git-difftool (1)
- Show changes using common diff tools
- git-fetch (1)
- Download objects and refs from another repository
- git-fetch-pack (1)
- Receive missing objects from another repository
- git-filter-branch (1)
- Rewrite branches
- git-for-each-ref (1)
- Output information on each ref
- git-for-each-repo (1)
- Run a Git command on a list of repositories
- git-format-patch (1)
- Prepare patches for e-mail submission
- git-fsck (1)
- Verifies the connectivity and validity of the objects ...
- git-fsck-objects (1)
- Verifies the connectivity and validity of the objects ...
- git-gc (1)
- Cleanup unnecessary files and optimize the local repos...
- git-get-tar-commit-id (1)
- Extract commit ID from an archive created using g...
- git-grep (1)
- Print lines matching a pattern
- git-gui (1)
- A portable graphical interface to Git
- git-hash-object (1)
- Compute object ID and optionally create an object from...
- git-help (1)
- Display help information about Git
- git-hook (1)
- Run git hooks
- git-http-backend (1)
- Server side implementation of Git over HTTP
- git-http-fetch (1)
- Download from a remote Git repository via HTTP
- git-http-push (1)
- Push objects over HTTP/DAV to another repository
- git-imap-send (1)
- Send a collection of patches from stdin to an IMAP folder
- git-index-pack (1)
- Build pack index file for an existing packed archive
- git-log (1)
- Show commit logs
- git-ls-files (1)
- Show information about files in the index and the work...
- git-ls-tree (1)
- List the contents of a tree object
- git-mailinfo (1)
- Extracts patch and authorship from a single e-mail mes...
- git-merge (1)
- Join two or more development histories together
- git-merge-file (1)
- Run a three-way file merge
- git-merge-one-file (1)
- The standard helper program to use with git-merge-index
- git-merge-tree (1)
- Perform merge without touching index or working tree
- git-mergetool--lib (1)
- Common Git merge tool shell scriptlets
- git-mktag (1)
- Creates a tag object with extra validation
- git-pack-objects (1)
- Create a packed archive of objects
- git-pack-refs (1)
- Pack heads and tags for efficient repository access
- git-patch-id (1)
- Compute unique ID for a patch
- git-prune (1)
- Prune all unreachable objects from the object database
- git-prune-packed (1)
- Remove extra objects that are already in pack files
- git-pull (1)
- Fetch from and integrate with another repository or a ...
- git-push (1)
- Update remote refs along with associated objects
- git-quiltimport (1)
- Applies a quilt patchset onto the current branch
- git-range-diff (1)
- Compare two commit ranges (e.g. two versions of a branch)
- git-read-tree (1)
- Reads tree information into the index
- git-rebase (1)
- Reapply commits on top of another base tip
- git-receive-pack (1)
- Receive what is pushed into the repository
- git-replay (1)
- EXPERIMENTAL: Replay commits on a new base, works with...
- git-request-pull (1)
- Generates a summary of pending changes
- git-reset (1)
- Reset current HEAD to the specified state
- git-rev-list (1)
- Lists commit objects in reverse chronological order
- git-rm (1)
- Remove files from the working tree and from the index
- git-send-email (1)
- Send a collection of patches as emails
- git-send-pack (1)
- Push objects over Git protocol to another repository
- git-sh-i18n (1)
- Git's i18n setup code for shell scripts
- git-sh-i18n--envsubst (1)
- Git's own envsubst(1) for i18n fallbacks
- git-sh-setup (1)
- Common Git shell script setup code
- git-shell (1)
- Restricted login shell for Git-only SSH access
- git-shortlog (1)
- Summarize 'git log' output
- git-show (1)
- Show various types of objects
- git-show-branch (1)
- Show branches and their commits
- git-show-index (1)
- Show packed archive index
- git-show-ref (1)
- List references in a local repository
- git-sparse-checkout (1)
- Reduce your working tree to a subset of tracked files
- git-stage (1)
- Add file contents to the staging area
- git-stash (1)
- Stash the changes in a dirty working directory away
- git-status (1)
- Show the working tree status
- git-stripspace (1)
- Remove unnecessary whitespace
- git-subtree (1)
- Merge subtrees together and split repository into subt...
- git-switch (1)
- Switch branches
- git-unpack-file (1)
- Creates a temporary file with a blob's contents
- git-unpack-objects (1)
- Unpack objects from a packed archive
- git-update-index (1)
- Register file contents in the working tree to the index
- git-update-ref (1)
- Update the object name stored in a ref safely
- git-update-server-info (1)
- Update auxiliary info file to help dumb servers
- git-upload-archive (1)
- Send archive back to git-archive
- git-upload-pack (1)
- Send objects packed back to git-fetch-pack
- git-var (1)
- Show a Git logical variable
- git-verify-commit (1)
- Check the GPG signature of commits
- git-verify-pack (1)
- Validate packed Git archive files
- git-verify-tag (1)
- Check the GPG signature of tags
- git-web--browse (1)
- Git helper script to launch a web browser
- git-whatchanged (1)
- Show logs with differences each commit introduces
- git-write-tree (1)
- Create a tree object from the current index
- gitattributes (5)
- Defining attributes per path
- gitformat-bundle (5)
- The bundle file format
- gitformat-chunk (5)
- Chunk-based file formats
- gitformat-commit-graph (5)
- Git commit-graph format
- gitformat-signature (5)
- Git cryptographic signature formats
- githooks (5)
- Hooks used by Git
- gitk (1)
- The Git repository browser
- gitmailmap (5)
- Map author/committer names and/or E-Mail addresses
- gitprotocol-common (5)
- Things common to various protocols
- gitprotocol-http (5)
- Git HTTP-based protocols
- gitprotocol-pack (5)
- How packs are transferred over-the-wire
- gitremote-helpers (7)
- Helper programs to interact with remote repositories
- gitsubmodules (7)
- Mounting one repository inside another
- gitworkflows (7)
- An overview of recommended workflows with Git
- gjar (1)
- - Archive tool for Java archives
- gjar-4.8 (1)
- - Archive tool for Java archives
- gjar-4.9 (1)
- - Archive tool for Java archives
- gjarsigner (1)
- Java ARchive (JAR) file signing and verification tool
- gjarsigner-4.8 (1)
- Java ARchive (JAR) file signing and verification tool
- gjarsigner-4.9 (1)
- Java ARchive (JAR) file signing and verification tool
- gjavah (1)
- - generate header files from Java class files
- gjavah-4.8 (1)
- - generate header files from Java class files
- gjavah-4.9 (1)
- - generate header files from Java class files
- glAccum (3gl)
- operate on the accumulation buffer
- glAlphaFunc (3gl)
- specify the alpha test function
- glArrayElement (3gl)
- render a vertex using the specified vertex array element
- glBegin (3gl)
- delimit the vertices of a primitive or a group of like...
- glBlendColor (3gl)
- set the blend color
- glBlendEquation (3gl)
- set the blend equation
- glBlendFunc (3gl)
- specify pixel arithmetic
- glcells (6x)
- growing cells graphics hack
- glClearAccum (3gl)
- specify clear values for the accumulation buffer
- glClearColor (3gl)
- specify clear values for the color buffers
- glClearDepth (3gl)
- specify the clear value for the depth buffer
- glClearIndex (3gl)
- specify the clear value for the color index buffers
- glClearStencil (3gl)
- specify the clear value for the stencil buffer
- glClipPlane (3gl)
- specify a plane against which all geometry is clipped
- glColor (3gl)
- set the current color
- glColor3b (3gl)
- set the current color
- glColor3bv (3gl)
- set the current color
- glColor3d (3gl)
- set the current color
- glColor3dv (3gl)
- set the current color
- glColor3f (3gl)
- set the current color
- glColor3fv (3gl)
- set the current color
- glColor3i (3gl)
- set the current color
- glColor3iv (3gl)
- set the current color
- glColor3s (3gl)
- set the current color
- glColor3sv (3gl)
- set the current color
- glColor3ub (3gl)
- set the current color
- glColor3ubv (3gl)
- set the current color
- glColor3ui (3gl)
- set the current color
- glColor3uiv (3gl)
- set the current color
- glColor3us (3gl)
- set the current color
- glColor3usv (3gl)
- set the current color
- glColor4b (3gl)
- set the current color
- glColor4bv (3gl)
- set the current color
- glColor4d (3gl)
- set the current color
- glColor4dv (3gl)
- set the current color
- glColor4f (3gl)
- set the current color
- glColor4fv (3gl)
- set the current color
- glColor4i (3gl)
- set the current color
- glColor4iv (3gl)
- set the current color
- glColor4s (3gl)
- set the current color
- glColor4sv (3gl)
- set the current color
- glColor4ub (3gl)
- set the current color
- glColor4ubv (3gl)
- set the current color
- glColor4ui (3gl)
- set the current color
- glColor4uiv (3gl)
- set the current color
- glColor4us (3gl)
- set the current color
- glColor4usv (3gl)
- set the current color
- glColorMaterial (3gl)
- cause a material color to track the current color
- glCopyPixels (3gl)
- copy pixels in the frame buffer
- glCopyTexSubImage3D (3gl)
- copy a three-dimensional texture subimage
- glCullFace (3gl)
- specify whether front- or back-facing facets can be cu...
- glDepthFunc (3gl)
- specify the value used for depth buffer comparisons
- glDepthMask (3gl)
- enable or disable writing into the depth buffer
- glDepthRange (3gl)
- specify mapping of depth values from normalized device...
- glDrawBuffer (3gl)
- specify which color buffers are to be drawn into
- glDrawPixels (3gl)
- write a block of pixels to the frame buffer
- glEdgeFlag (3gl)
- flag edges as either boundary or nonboundary
- glEdgeFlagv (3gl)
- flag edges as either boundary or nonboundary
- glEnd (3gl)
- delimit the vertices of a primitive or a group of like...
- glEvalMesh (3gl)
- compute a one- or two-dimensional grid of points or lines
- glEvalMesh1 (3gl)
- compute a one- or two-dimensional grid of points or lines
- glEvalMesh2 (3gl)
- compute a one- or two-dimensional grid of points or lines
- glEvalPoint (3gl)
- generate and evaluate a single point in a mesh
- glEvalPoint1 (3gl)
- generate and evaluate a single point in a mesh
- glEvalPoint2 (3gl)
- generate and evaluate a single point in a mesh
- glFinish (3gl)
- block until all GL execution is complete
- glFlush (3gl)
- force execution of GL commands in finite time
- glFrustum (3gl)
- multiply the current matrix by a perspective matrix
- glGet (3gl)
- return the value or values of a selected parameter
- glGetBooleanv (3gl)
- return the value or values of a selected parameter
- glGetClipPlane (3gl)
- return the coefficients of the specified clipping plane
- glGetDoublev (3gl)
- return the value or values of a selected parameter
- glGetFloatv (3gl)
- return the value or values of a selected parameter
- glGetHistogram (3gl)
- get histogram table
- glGetHistogramParameter (3gl)
- get histogram parameters
- glGetIntegerv (3gl)
- return the value or values of a selected parameter
- glGetLight (3gl)
- return light source parameter values
- glGetLightfv (3gl)
- return light source parameter values
- glGetLightiv (3gl)
- return light source parameter values
- glGetPixelMap (3gl)
- return the specified pixel map
- glGetPixelMapfv (3gl)
- return the specified pixel map
- glGetPixelMapuiv (3gl)
- return the specified pixel map
- glGetPixelMapusv (3gl)
- return the specified pixel map
- glGetPointerv (3gl)
- return the address of the specified pointer
- glGetPolygonStipple (3gl)
- return the polygon stipple pattern
- glhack (6)
- Exploring The Mazes of Menace
- glhackrc (5)
- Configuration file for the glHack game
- glhanoi (6x)
- OpenGL Towers of Hanoi
- glHint (3gl)
- specify implementation-specific hints
- glHistogram (3gl)
- define histogram table
- glib-compile-schemas (1)
- GSettings schema compiler
- glib-genmarshal (1)
- C code marshaller generation utility for GLib closures
- glIndex (3gl)
- set the current color index
- glIndexd (3gl)
- set the current color index
- glIndexdv (3gl)
- set the current color index
- glIndexf (3gl)
- set the current color index
- glIndexfv (3gl)
- set the current color index
- glIndexi (3gl)
- set the current color index
- glIndexiv (3gl)
- set the current color index
- glIndexMask (3gl)
- control the writing of individual bits in the color in...
- glIndexs (3gl)
- set the current color index
- glIndexsv (3gl)
- set the current color index
- glIndexub (3gl)
- set the current color index
- glIndexubv (3gl)
- set the current color index
- glInitNames (3gl)
- initialize the name stack
- glIsEnabled (3gl)
- test whether a capability is enabled
- glLight (3gl)
- set light source parameters
- glLightf (3gl)
- set light source parameters
- glLightfv (3gl)
- set light source parameters
- glLighti (3gl)
- set light source parameters
- glLightiv (3gl)
- set light source parameters
- glLightModel (3gl)
- set the lighting model parameters
- glLightModelf (3gl)
- set the lighting model parameters
- glLightModelfv (3gl)
- set the lighting model parameters
- glLightModeli (3gl)
- set the lighting model parameters
- glLightModeliv (3gl)
- set the lighting model parameters
- glLineStipple (3gl)
- specify the line stipple pattern
- glLineWidth (3gl)
- specify the width of rasterized lines
- glListBase (3gl)
- set the display-list base for glCallLists
- glLoadIdentity (3gl)
- replace the current matrix with the identity matrix
- glLoadMatrix (3gl)
- replace the current matrix with the specified matrix
- glLoadMatrixd (3gl)
- replace the current matrix with the specified matrix
- glLoadMatrixf (3gl)
- replace the current matrix with the specified matrix
- glLoadName (3gl)
- load a name onto the name stack
- glMapGrid (3gl)
- define a one- or two-dimensional mesh
- glMapGrid1d (3gl)
- define a one- or two-dimensional mesh
- glMapGrid1f (3gl)
- define a one- or two-dimensional mesh
- glMapGrid2d (3gl)
- define a one- or two-dimensional mesh
- glMapGrid2f (3gl)
- define a one- or two-dimensional mesh
- glMaterial (3gl)
- specify material parameters for the lighting model
- glMaterialf (3gl)
- specify material parameters for the lighting model
- glMaterialfv (3gl)
- specify material parameters for the lighting model
- glMateriali (3gl)
- specify material parameters for the lighting model
- glMaterialiv (3gl)
- specify material parameters for the lighting model
- glmatrix (6x)
- simulates the title sequence effect of the movie
- glMatrixMode (3gl)
- specify which matrix is the current matrix
- glMultiTexCoord1dARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1dvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1fARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1fvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1iARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1ivARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1sARB (3gl)
- set the current texture coordinates
- glMultiTexCoord1svARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2dARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2dvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2fARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2fvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2iARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2ivARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2sARB (3gl)
- set the current texture coordinates
- glMultiTexCoord2svARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3dARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3dvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3fARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3fvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3iARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3ivARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3sARB (3gl)
- set the current texture coordinates
- glMultiTexCoord3svARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4dARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4dvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4fARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4fvARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4iARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4ivARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4sARB (3gl)
- set the current texture coordinates
- glMultiTexCoord4svARB (3gl)
- set the current texture coordinates
- glMultiTexCoordARB (3gl)
- set the current texture coordinates
- glMultMatrix (3gl)
- multiply the current matrix with the specified matrix
- glMultMatrixd (3gl)
- multiply the current matrix with the specified matrix
- glMultMatrixf (3gl)
- multiply the current matrix with the specified matrix
- glNormal (3gl)
- set the current normal vector
- glNormal3b (3gl)
- set the current normal vector
- glNormal3bv (3gl)
- set the current normal vector
- glNormal3d (3gl)
- set the current normal vector
- glNormal3dv (3gl)
- set the current normal vector
- glNormal3f (3gl)
- set the current normal vector
- glNormal3fv (3gl)
- set the current normal vector
- glNormal3i (3gl)
- set the current normal vector
- glNormal3iv (3gl)
- set the current normal vector
- glNormal3s (3gl)
- set the current normal vector
- glNormal3sv (3gl)
- set the current normal vector
- glob (3)
- find pathnames matching a pattern, free memory from gl...
- glob (3p)
- generate pathnames matching a pattern
- glob (7)
- globbing pathnames
- glob (n)
- Return names of files that match patterns
- glob.h (0p)
- pathname pattern-matching types
- glob_match (9)
- match a text string against a glob-style pattern
- globaltime (1)
- International multiclock timeconverter for the Xfce De...
- globfree (3)
- find pathnames matching a pattern, free memory from gl...
- glOrtho (3gl)
- multiply the current matrix with an orthographic matrix
- glPassThrough (3gl)
- place a marker in the feedback buffer
- glPixelZoom (3gl)
- specify the pixel zoom factors
- glPointSize (3gl)
- specify the diameter of rasterized points
- glPolygonOffset (3gl)
- set the scale and units used to calculate depth values
- glPolygonStipple (3gl)
- set the polygon stippling pattern
- glPopAttrib (3gl)
- push and pop the server attribute stack
- glPopClientAttrib (3gl)
- push and pop the client attribute stack
- glPopMatrix (3gl)
- push and pop the current matrix stack
- glPopName (3gl)
- push and pop the name stack
- glPushAttrib (3gl)
- push and pop the server attribute stack
- glPushClientAttrib (3gl)
- push and pop the client attribute stack
- glPushMatrix (3gl)
- push and pop the current matrix stack
- glPushName (3gl)
- push and pop the name stack
- glRasterPos (3gl)
- specify the raster position for pixel operations
- glRasterPos2d (3gl)
- specify the raster position for pixel operations
- glRasterPos2dv (3gl)
- specify the raster position for pixel operations
- glRasterPos2f (3gl)
- specify the raster position for pixel operations
- glRasterPos2fv (3gl)
- specify the raster position for pixel operations
- glRasterPos2i (3gl)
- specify the raster position for pixel operations
- glRasterPos2iv (3gl)
- specify the raster position for pixel operations
- glRasterPos2s (3gl)
- specify the raster position for pixel operations
- glRasterPos2sv (3gl)
- specify the raster position for pixel operations
- glRasterPos3d (3gl)
- specify the raster position for pixel operations
- glRasterPos3dv (3gl)
- specify the raster position for pixel operations
- glRasterPos3f (3gl)
- specify the raster position for pixel operations
- glRasterPos3fv (3gl)
- specify the raster position for pixel operations
- glRasterPos3i (3gl)
- specify the raster position for pixel operations
- glRasterPos3iv (3gl)
- specify the raster position for pixel operations
- glRasterPos3s (3gl)
- specify the raster position for pixel operations
- glRasterPos3sv (3gl)
- specify the raster position for pixel operations
- glRasterPos4d (3gl)
- specify the raster position for pixel operations
- glRasterPos4dv (3gl)
- specify the raster position for pixel operations
- glRasterPos4f (3gl)
- specify the raster position for pixel operations
- glRasterPos4fv (3gl)
- specify the raster position for pixel operations
- glRasterPos4i (3gl)
- specify the raster position for pixel operations
- glRasterPos4iv (3gl)
- specify the raster position for pixel operations
- glRasterPos4s (3gl)
- specify the raster position for pixel operations
- glRasterPos4sv (3gl)
- specify the raster position for pixel operations
- glReadPixels (3gl)
- read a block of pixels from the frame buffer
- glResetHistogram (3gl)
- reset histogram table entries to zero
- glRotate (3gl)
- multiply the current matrix by a rotation matrix
- glRotated (3gl)
- multiply the current matrix by a rotation matrix
- glRotatef (3gl)
- multiply the current matrix by a rotation matrix
- glScale (3gl)
- multiply the current matrix by a general scaling matrix
- glScaled (3gl)
- multiply the current matrix by a general scaling matrix
- glScalef (3gl)
- multiply the current matrix by a general scaling matrix
- glschool (6x)
- a 3D schooling simulation
- glScissor (3gl)
- define the scissor box
- glSelectBuffer (3gl)
- establish a buffer for selection mode values
- glShadeModel (3gl)
- select flat or smooth shading
- glslideshow (6x)
- slideshow of images using smooth zooming and fades
- glsnake (6x)
- OpenGL enhanced Rubik's Snake cyclewaster.
- glStencilMask (3gl)
- control the writing of individual bits in the stencil ...
- glTexCoord (3gl)
- set the current texture coordinates
- glTexCoord1d (3gl)
- set the current texture coordinates
- glTexCoord1dv (3gl)
- set the current texture coordinates
- glTexCoord1f (3gl)
- set the current texture coordinates
- glTexCoord1fv (3gl)
- set the current texture coordinates
- glTexCoord1i (3gl)
- set the current texture coordinates
- glTexCoord1iv (3gl)
- set the current texture coordinates
- glTexCoord1s (3gl)
- set the current texture coordinates
- glTexCoord1sv (3gl)
- set the current texture coordinates
- glTexCoord2d (3gl)
- set the current texture coordinates
- glTexCoord2dv (3gl)
- set the current texture coordinates
- glTexCoord2f (3gl)
- set the current texture coordinates
- glTexCoord2fv (3gl)
- set the current texture coordinates
- glTexCoord2i (3gl)
- set the current texture coordinates
- glTexCoord2iv (3gl)
- set the current texture coordinates
- glTexCoord2s (3gl)
- set the current texture coordinates
- glTexCoord2sv (3gl)
- set the current texture coordinates
- glTexCoord3d (3gl)
- set the current texture coordinates
- glTexCoord3dv (3gl)
- set the current texture coordinates
- glTexCoord3f (3gl)
- set the current texture coordinates
- glTexCoord3fv (3gl)
- set the current texture coordinates
- glTexCoord3i (3gl)
- set the current texture coordinates
- glTexCoord3iv (3gl)
- set the current texture coordinates
- glTexCoord3s (3gl)
- set the current texture coordinates
- glTexCoord3sv (3gl)
- set the current texture coordinates
- glTexCoord4d (3gl)
- set the current texture coordinates
- glTexCoord4dv (3gl)
- set the current texture coordinates
- glTexCoord4f (3gl)
- set the current texture coordinates
- glTexCoord4fv (3gl)
- set the current texture coordinates
- glTexCoord4i (3gl)
- set the current texture coordinates
- glTexCoord4iv (3gl)
- set the current texture coordinates
- glTexCoord4s (3gl)
- set the current texture coordinates
- glTexCoord4sv (3gl)
- set the current texture coordinates
- glTexGen (3gl)
- control the generation of texture coordinates
- glTexGend (3gl)
- control the generation of texture coordinates
- glTexGendv (3gl)
- control the generation of texture coordinates
- glTexGenf (3gl)
- control the generation of texture coordinates
- glTexGenfv (3gl)
- control the generation of texture coordinates
- glTexGeni (3gl)
- control the generation of texture coordinates
- glTexGeniv (3gl)
- control the generation of texture coordinates
- glTexImage3D (3gl)
- specify a three-dimensional texture image
- glTexSubImage3D (3gl)
- specify a three-dimensional texture subimage
- glTranslate (3gl)
- multiply the current matrix by a translation matrix
- glTranslated (3gl)
- multiply the current matrix by a translation matrix
- glTranslatef (3gl)
- multiply the current matrix by a translation matrix
- glut (3)
- an introduction to the OpenGL Utility Toolkit
- glutAddMenuEntry (3)
- adds a menu entry to the bottom of the current menu.
- glutAddSubMenu (3)
- adds a sub-menu trigger to the bottom of the current m...
- glutAttachMenu (3)
- attaches a mouse button for the current window to the ...
- glutBitmapCharacter (3)
- renders a bitmap character using OpenGL.
- glutBitmapWidth (3)
- returns the width of a bitmap character, glutBitmapLen...
- glutButtonBoxFunc (3)
- sets the dial & button box button callback for the cu...
- glutChangeToMenuEntry (3)
- changes the specified menu item in the current me...
- glutChangeToSubMenu (3)
- changes the specified menu item in the current menu...
- glutCopyColormap (3)
- copies the logical colormap for the layer in use from ...
- glutDestroyMenu (3)
- destroys the specified menu.
- glutDestroyWindow (3)
- destroys the specified window.
- glutDialsFunc (3)
- sets the dial & button box dials callback for the curr...
- glutDisplayFunc (3)
- sets the display callback for the current window.
- glutEntryFunc (3)
- sets the mouse enter/leave callback for the current wi...
- glutEstablishOverlay (3)
- establishes an overlay (if possible) for the curre...
- glutExtensionSupported (3)
- helps to easily determine whether a given OpenGL...
- glutFullScreen (3)
- requests that the current window be made full screen.
- glutGameModeString (3)
- sets the game mode configuration via a string.
- glutGetModifiers (3)
- returns the modifier key state when certain callbacks ...
- glutShowOverlay (3)
- shows or hides the overlay of the current window
- glutShowWindow (3)
- change the display status of the current window.
- glutIdleFunc (3)
- sets the global idle callback.
- glutInit (3)
- initialize the GLUT library.
- glutInitDisplayMode (3)
- sets the initial display mode.
- glutInitDisplayString (3)
- sets the initial display mode via a string.
- glutInitWindowPosition (3)
- set the initial window position and size respect...
- glutJoystickFunc (3)
- sets the joystick callback for the current window.
- glutKeyboardFunc (3)
- sets the keyboard callback for the current window.
- glutKeyboardUpFunc (3)
- sets the keyboard up (key release) callback for the ...
- glutLayerGet (3)
- retrieves GLUT state pertaining to the layers of the c...
- glutMainLoop (3)
- enters the GLUT event processing loop.
- glutMenuStatusFunc (3)
- sets the global menu status callback.
- glutMotionFunc (3)
- set the motion and passive motion callbacks respective...
- glutMouseFunc (3)
- sets the mouse callback for the current window.
- glutOverlayDisplayFunc (3)
- sets the overlay display callback for the curren...
- glutPopWindow (3)
- change the stacking order of the current window relati...
- glutPositionWindow (3)
- requests a change to the position of the current win...
- glutPostOverlayRedisplay (3)
- marks the overlay of the current or specified ...
- glutPostRedisplay (3)
- marks the current or specified window as needing to b...
- glutRemoveMenuItem (3)
- remove the specified menu item.
- glutRemoveOverlay (3)
- removes the overlay (if one exists) from the current ...
- glutReshapeFunc (3)
- sets the reshape callback for the current window.
- glutReshapeWindow (3)
- requests a change to the size of the current window.
- glutSetColor (3)
- sets the color of a colormap entry in the layer of use...
- glutSetCursor (3)
- changes the cursor image of the current window.
- glutSetWindowTitle (3)
- change the window or icon title respectively of the ...
- glutSetMenu (3)
- sets the current menu; glutGetMenu - returns the ident...
- glutSetWindow (3)
- sets the current window; glutGetWindow - returns the i...
- glutSolidDodecahedron (3)
- render a solid or wireframe dodecahedron (12-side...
- glutSolidIcosahedron (3)
- render a solid or wireframe icosahedron (20-sided ...
- glutSolidOctahedron (3)
- render a solid or wireframe octahedron (8-sided reg...
- glutSolidSphere (3)
- render a solid or wireframe sphere respectively.
- glutSolidTetrahedron (3)
- render a solid or wireframe tetrahedron (4-sided r...
- glutSolidTorus (3)
- render a solid or wireframe torus (doughnut) respectiv...
- glutSpaceballButtonFunc (3)
- sets the Spaceball button callback for the curr...
- glutSpaceballMotionFunc (3)
- sets the Spaceball motion callback for the curr...
- glutSpaceballRotateFunc (3)
- sets the Spaceball rotation callback for the cu...
- glutSpecialFunc (3)
- sets the special keyboard callback for the current win...
- glutSpecialUpFunc (3)
- sets the special keyboard up (key release) callback f...
- glutStrokeCharacter (3)
- renders a stroke character using OpenGL.
- glutStrokeWidth (3)
- (unknown subject)
- glutSwapBuffers (3)
- swaps the buffers of the current window if double buff...
- glutTabletButtonFunc (3)
- sets the special keyboard callback for the current...
- glutTabletMotionFunc (3)
- sets the special keyboard callback for the current...
- glutUseLayer (3)
- changes the layer in use for the current window.
- glutVisibilityFunc (3)
- sets the visibility callback for the current window.
- glViewport (3gl)
- set the viewport
- glXChooseVisual (3gl)
- return a visual that matches specified attributes
- glXCopyContext (3gl)
- copy state from one rendering context to another
- glXGetClientString (3gl)
- return a string describing the client
- glXGetContextIDEXT (3gl)
- get the XID for a context.
- glXGetCurrentContext (3gl)
- return the current context
- glXGetCurrentDrawable (3gl)
- return the current drawable
- glXImportContextEXT (3gl)
- import another process's indirect rendering context.
- glXIntro (3gl)
- Introduction to OpenGL in the X window system
- glXIsDirect (3gl)
- indicate whether direct rendering is enabled
- glXMakeCurrent (3gl)
- attach a GLX context to a window or a GLX pixmap
- glXQueryExtension (3gl)
- indicate whether the GLX extension is supported
- glXQueryServerString (3gl)
- return string describing the server
- glXQueryVersion (3gl)
- return the version numbers of the GLX extension
- glXSwapBuffers (3gl)
- exchange front and back buffers
- gm2-13 (1)
- The GNU Modula-2 Compiler
- gnet_stats_finish_copy (9)
- finish dumping procedure
- gnome-chess (6)
- A 3D chess application
- gnome-disk-image-mounter (1)
- Attach and mount disk images
- gnome-disks (1)
- the GNOME Disks application
- gnome-keyring-daemon (1)
- The gnome-keyring daemon
- gnome-mahjongg (6)
- A matching game played with Mahjongg tiles
- gnome-mines (6)
- The popular logic puzzle minesweeper
- gnome-screenshot (1)
- capture the screen, a window, or an user-defined area ...
- gnome-session (1)
- Start the GNOME desktop environment
- gnome-session-inhibit (1)
- inhibit gnome-session functionality
- gnome-session-quit (1)
- End the current GNOME session
- gnome-shell (1)
- Graphical shell for the GNOME desktop
- gnome-sudoku (6)
- puzzle game for the popular Japanese sudoku logic puzzle
- gnumeric (1)
- a GNOME spreadsheet application.
- gnutls_aead_cipher_decrypt (3)
- API function
- gnutls_aead_cipher_decryptv2 (3)
- API function
- gnutls_aead_cipher_deinit (3)
- API function
- gnutls_aead_cipher_encrypt (3)
- API function
- gnutls_aead_cipher_encryptv (3)
- API function
- gnutls_aead_cipher_encryptv2 (3)
- API function
- gnutls_aead_cipher_init (3)
- API function
- gnutls_aead_cipher_set_key (3)
- API function
- gnutls_anon_set_server_dh_params (3)
- API function
- gnutls_anon_set_server_known_dh_params (3)
- API function
- gnutls_auth_client_get_type (3)
- API function
- gnutls_auth_get_type (3)
- API function
- gnutls_auth_server_get_type (3)
- API function
- gnutls_certificate_set_dh_params (3)
- API function
- gnutls_certificate_set_known_dh_params (3)
- API function
- gnutls_check_version (3)
- API function
- gnutls_cipher_add_auth (3)
- API function
- gnutls_cipher_decrypt (3)
- API function
- gnutls_cipher_decrypt2 (3)
- API function
- gnutls_cipher_decrypt3 (3)
- API function
- gnutls_cipher_deinit (3)
- API function
- gnutls_cipher_encrypt (3)
- API function
- gnutls_cipher_encrypt2 (3)
- API function
- gnutls_cipher_encrypt3 (3)
- API function
- gnutls_cipher_get (3)
- API function
- gnutls_cipher_get_block_size (3)
- API function
- gnutls_cipher_get_id (3)
- API function
- gnutls_cipher_get_iv_size (3)
- API function
- gnutls_cipher_get_key_size (3)
- API function
- gnutls_cipher_get_name (3)
- API function
- gnutls_cipher_get_tag_size (3)
- API function
- gnutls_cipher_init (3)
- API function
- gnutls_cipher_list (3)
- API function
- gnutls_cipher_set_iv (3)
- API function
- gnutls_cipher_suite_get_name (3)
- API function
- gnutls_cipher_suite_info (3)
- API function
- gnutls_cipher_tag (3)
- API function
- gnutls_ciphersuite_get (3)
- API function
- gnutls_compress_certificate_set_methods (3)
- API function
- gnutls_crypto_register_aead_cipher (3)
- API function
- gnutls_crypto_register_cipher (3)
- API function
- gnutls_db_check_entry (3)
- API function
- gnutls_db_check_entry_expire_time (3)
- API function
- gnutls_db_check_entry_time (3)
- API function
- gnutls_db_get_default_cache_expiration (3)
- API function
- gnutls_db_set_cache_expiration (3)
- API function
- gnutls_dh_get_group (3)
- API function
- gnutls_dh_get_peers_public_bits (3)
- API function
- gnutls_dh_get_prime_bits (3)
- API function
- gnutls_dh_get_pubkey (3)
- API function
- gnutls_dh_get_secret_bits (3)
- API function
- gnutls_dh_params_cpy (3)
- API function
- gnutls_dh_params_deinit (3)
- API function
- gnutls_dh_params_export2_pkcs3 (3)
- API function
- gnutls_dh_params_export_pkcs3 (3)
- API function
- gnutls_dh_params_export_raw (3)
- API function
- gnutls_dh_params_generate2 (3)
- API function
- gnutls_dh_params_import_dsa (3)
- API function
- gnutls_dh_params_import_pkcs3 (3)
- API function
- gnutls_dh_params_import_raw (3)
- API function
- gnutls_dh_params_import_raw2 (3)
- API function
- gnutls_dh_params_import_raw3 (3)
- API function
- gnutls_dh_params_init (3)
- API function
- gnutls_dh_set_prime_bits (3)
- API function
- gnutls_early_cipher_get (3)
- API function
- gnutls_early_prf_hash_get (3)
- API function
- gnutls_est_record_overhead_size (3)
- API function
- gnutls_fips140_push_context (3)
- API function
- gnutls_handshake (3)
- API function
- gnutls_handshake_description_get_name (3)
- API function
- gnutls_handshake_get_last_in (3)
- API function
- gnutls_handshake_get_last_out (3)
- API function
- gnutls_handshake_set_hook_function (3)
- API function
- gnutls_handshake_set_max_packet_length (3)
- API function
- gnutls_handshake_set_post_client_hell... (3)
- API function
- gnutls_handshake_set_private_extensions (3)
- API function
- gnutls_handshake_set_random (3)
- API function
- gnutls_handshake_set_read_function (3)
- API function
- gnutls_handshake_set_secret_function (3)
- API function
- gnutls_handshake_set_timeout (3)
- API function
- gnutls_handshake_write (3)
- API function
- gnutls_hash (3)
- API function
- gnutls_hash_copy (3)
- API function
- gnutls_hash_deinit (3)
- API function
- gnutls_hash_fast (3)
- API function
- gnutls_hash_get_len (3)
- API function
- gnutls_hash_init (3)
- API function
- gnutls_hash_output (3)
- API function
- gnutls_hash_squeeze (3)
- API function
- gnutls_heartbeat_allowed (3)
- API function
- gnutls_heartbeat_enable (3)
- API function
- gnutls_heartbeat_get_timeout (3)
- API function
- gnutls_heartbeat_ping (3)
- API function
- gnutls_heartbeat_pong (3)
- API function
- gnutls_heartbeat_set_timeouts (3)
- API function
- gnutls_hex2bin (3)
- API function
- gnutls_hex_decode (3)
- API function
- gnutls_hex_decode2 (3)
- API function
- gnutls_hex_encode (3)
- API function
- gnutls_hex_encode2 (3)
- API function
- gnutls_hkdf_expand (3)
- API function
- gnutls_hkdf_extract (3)
- API function
- gnutls_hmac (3)
- API function
- gnutls_hmac_copy (3)
- API function
- gnutls_hmac_deinit (3)
- API function
- gnutls_hmac_fast (3)
- API function
- gnutls_hmac_get_key_size (3)
- API function
- gnutls_hmac_get_len (3)
- API function
- gnutls_hmac_init (3)
- API function
- gnutls_hmac_output (3)
- API function
- gnutls_hmac_set_nonce (3)
- API function
- gnutls_ocsp_resp_check_crt (3)
- API function
- gnutls_ocsp_resp_get_signature_algorithm (3)
- API function
- gnutls_ocsp_status_request_is_checked (3)
- API function
- gnutls_openpgp_privkey_sign_hash (3)
- API function
- gnutls_pk_algorithm_get_name (3)
- API function
- gnutls_pkcs11_copy_attached_extension (3)
- API function
- gnutls_pkcs11_privkey_get_pk_algorithm (3)
- API function
- gnutls_pkcs11_token_check_mechanism (3)
- API function
- gnutls_pkcs11_token_get_mechanism (3)
- API function
- gnutls_pkcs_schema_get_name (3)
- API function
- gnutls_pkcs_schema_get_oid (3)
- API function
- gnutls_prf_hash_get (3)
- API function
- gnutls_priority_cipher_list (3)
- API function
- gnutls_priority_get_cipher_suite_index (3)
- API function
- gnutls_privkey_export_dh_raw (3)
- API function
- gnutls_privkey_get_pk_algorithm (3)
- API function
- gnutls_privkey_import_dh_raw (3)
- API function
- gnutls_privkey_sign_hash (3)
- API function
- gnutls_privkey_sign_hash2 (3)
- API function
- gnutls_psk_client_get_hint (3)
- API function
- gnutls_psk_set_server_credentials_hint (3)
- API function
- gnutls_psk_set_server_dh_params (3)
- API function
- gnutls_psk_set_server_known_dh_params (3)
- API function
- gnutls_pubkey_export_dh_raw (3)
- API function
- gnutls_pubkey_get_pk_algorithm (3)
- API function
- gnutls_pubkey_get_preferred_hash_algo... (3)
- API function
- gnutls_pubkey_import_dh_raw (3)
- API function
- gnutls_pubkey_verify_hash2 (3)
- API function
- gnutls_reauth (3)
- API function
- gnutls_record_can_use_length_hiding (3)
- API function
- gnutls_record_check_corked (3)
- API function
- gnutls_record_check_pending (3)
- API function
- gnutls_record_overhead_size (3)
- API function
- gnutls_rehandshake (3)
- API function
- gnutls_rnd_refresh (3)
- API function
- gnutls_session_channel_binding (3)
- API function
- gnutls_sign_algorithm_get (3)
- API function
- gnutls_sign_algorithm_get_client (3)
- API function
- gnutls_sign_algorithm_get_requested (3)
- API function
- gnutls_sign_get_hash_algorithm (3)
- API function
- gnutls_sign_get_pk_algorithm (3)
- API function
- gnutls_sign_supports_pk_algorithm (3)
- API function
- gnutls_transport_set_push_function (3)
- API function
- gnutls_transport_set_vec_push_function (3)
- API function
- gnutls_x509_crl_check_issuer (3)
- API function
- gnutls_x509_crl_get_authority_key_gn_... (3)
- API function
- gnutls_x509_crl_get_authority_key_id (3)
- API function
- gnutls_x509_crl_get_signature_algorithm (3)
- API function
- gnutls_x509_crl_get_this_update (3)
- API function
- gnutls_x509_crl_set_authority_key_id (3)
- API function
- gnutls_x509_crl_set_this_update (3)
- API function
- gnutls_x509_crq_get_challenge_password (3)
- API function
- gnutls_x509_crq_get_pk_algorithm (3)
- API function
- gnutls_x509_crq_get_signature_algorithm (3)
- API function
- gnutls_x509_crq_get_subject_alt_other... (3)
- API function
- gnutls_x509_crq_set_challenge_password (3)
- API function
- gnutls_x509_crq_set_subject_alt_other... (3)
- API function
- gnutls_x509_crt_check_email (3)
- API function
- gnutls_x509_crt_check_hostname (3)
- API function
- gnutls_x509_crt_check_hostname2 (3)
- API function
- gnutls_x509_crt_check_ip (3)
- API function
- gnutls_x509_crt_check_issuer (3)
- API function
- gnutls_x509_crt_check_key_purpose (3)
- API function
- gnutls_x509_crt_check_revocation (3)
- API function
- gnutls_x509_crt_equals (3)
- This function compares two gnutls_x509_crt_t cer...
- gnutls_x509_crt_equals2 (3)
- This function compares a gnutls_x509_crt_t cert...
- gnutls_x509_crt_get_authority_info_ac... (3)
- API function
- gnutls_x509_crt_get_authority_key_gn_... (3)
- API function
- gnutls_x509_crt_get_authority_key_id (3)
- API function
- gnutls_x509_crt_get_inhibit_anypolicy (3)
- API function
- gnutls_x509_crt_get_issuer_alt_othern... (3)
- API function
- gnutls_x509_crt_get_pk_algorithm (3)
- API function
- gnutls_x509_crt_get_preferred_hash_al... (3)
- API function
- gnutls_x509_crt_get_signature_algorithm (3)
- API function
- gnutls_x509_crt_get_subject_alt_other... (3)
- API function
- gnutls_x509_crt_set_authority_info_ac... (3)
- API function
- gnutls_x509_crt_set_authority_key_id (3)
- API function
- gnutls_x509_crt_set_inhibit_anypolicy (3)
- API function
- gnutls_x509_crt_set_issuer_alt_othername (3)
- API function
- gnutls_x509_crt_set_subject_alt_other... (3)
- API function
- gnutls_x509_ext_export_authority_key_id (3)
- API function
- gnutls_x509_ext_export_inhibit_anypolicy (3)
- API function
- gnutls_x509_ext_import_authority_key_id (3)
- API function
- gnutls_x509_ext_import_inhibit_anypolicy (3)
- API function
- gnutls_x509_name_constraints_check (3)
- API function
- gnutls_x509_name_constraints_check_crt (3)
- API function
- gnutls_x509_othername_to_virtual (3)
- API function
- gnutls_x509_privkey_get_pk_algorithm (3)
- API function
- gnutls_x509_privkey_get_pk_algorithm2 (3)
- API function
- gnutls_x509_privkey_import_dh_raw (3)
- API function
- gnutls_x509_privkey_sign_hash (3)
- API function
- gnutls_x509_tlsfeatures_check_crt (3)
- API function
- goop (6x)
- squishy transparent oil and bubble screenhack
- gost12-256-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- gost12-512-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- gpart (8)
- guess PC-type hard disk partitions
- gpasswd (1)
- administer /etc/group and /etc/gshadow
- gperf (1)
- generate a perfect hash function from a key set
- gpg-connect-agent (1)
- Communicate with a running agent
- gpg-preset-passphrase (1)
- Put a passphrase into gpg-agent's cache
- gpg-zip (1)
- Encrypt or sign files into an archive
- gpgconf (1)
- Modify .gnupg home directories
- gpgsm-gencert.sh (1)
- Generate an X.509 certificate request
- gpk-install-local-file (1)
- GNOME PackageKit Local File Helper
- gpk-install-package-name (1)
- GNOME PackageKit Package Name Helper
- gpm-root (1)
- a default handler for gpm, used to draw menus on the r...
- gprof (1)
- display call graph profile data
- gpsctl (1)
- control the modes of a GPS
- me_cpu (n)
- Virtual machine implementation II for parsing token st...
- me_cpucore (n)
- ME virtual machine state manipulation
- me_tcl (n)
- Virtual machine implementation I for parsing token str...
- me_intro (n)
- Introduction to virtual machines for parsing token str...
- me_vm (n)
- Virtual machine for parsing token streams
- grantpt (3)
- grant access to the slave pseudoterminal
- grantpt (3p)
- grant access to the slave pseudo-terminal device
- grap2graph (1)
- convert a grap diagram into a cropped bitmap image
- graph (1)
- Converts table format to plot or graphic formats.
- graph (n)
- Create and manipulate directed graph objects
- graph1 (n)
- Create and manipulate directed graph objects
- GraphicsMagick-config (1)
- get information about the installed version of Gr...
- GraphicsMagickWand-config (1)
- get information about the installed version o...
- graphml2gv (1)
- GRAPHML-DOT converter
- graphops (n)
- Operation for (un)directed graph objects
- graphviz (7)
- rich set of graph drawing tools
- grep (1)
- print lines matching a pattern
- grep (1p)
- search a file for a pattern
- grep-changelog (1)
- print ChangeLog entries matching criteria
- grepdiff (1)
- show files modified by a diff containing a regex
- grephistory (1)
- Query the INN history database
- grepmail (1)
- search mailboxes for mail matching a regular expression
- grid (n)
- Geometry manager that arranges widgets in a grid
- grmic (1)
- Generate stubs for Remote Method Invocation
- grmic-4.8 (1)
- Generate stubs for Remote Method Invocation
- grmic-4.9 (1)
- Generate stubs for Remote Method Invocation
- groff (1)
- front-end for the groff document formatting system
- groff (7)
- a short reference for the GNU roff language
- groff_char (7)
- groff glyph names
- groff_hdtbl (7)
- groff `hdtbl' macros for generation of tables
- groff_tmac (5)
- macro files in the roff typesetting system
- groff_www (7)
- groff macros for authoring web pages
- grohtml (1)
- html driver for groff
- grolj4 (1)
- groff driver for HP Laserjet 4 family
- group.conf (5)
- configuration file for the pam_group module
- groupmod (8)
- modify a group definition on the system
- groups (1)
- print the groups a user is in
- grp.h (0p)
- group structure
- pwconv (8)
- convert to and from shadow passwords and groups
- grub (8)
- the grub shell
- grub2-mkpasswd-pbkdf2 (1)
- generate hashed password for GRUB
- grub2-mkrelpath (1)
- make a system path relative to its root
- grub2-mount (1)
- export GRUB filesystem with FUSE
- grub2-ofpathname (8)
- find OpenBOOT path for a device
- grub2-reboot (8)
- set the default boot entry for GRUB, for the next boot...
- grub2-script-check (1)
- check grub.cfg for syntax errors
- grub2-set-default (8)
- set the saved default boot entry for GRUB
- gs (1)
- Ghostscript (PostScript and PDF language interpreter a...
- gsbj (1)
- Format and print text for BubbleJet printer using ghos...
- gsdj (1)
- Format and print text for DeskJet printer using ghosts...
- gsettings-schema-convert (1)
- GConf to GSettings schema conversion
- gsf-office-thumbnailer (1)
- office files thumbnailer for the GNOME desktop
- gsftopk (1)
- render a ghostscript font in TeX pk form
- gsl-config (1)
- script to get version number and compiler flags of the...
- gsl-histogram (1)
- compute histogram of data on stdin
- gslj (1)
- Format and print text for LaserJet printer using ghost...
- gslp (1)
- Format and print text using ghostscript
- gsnd (1)
- Run ghostscript (PostScript and PDF engine) without di...
- GSSAPI (3)
- Perl extension providing access to the GSSAPIv2 library
- GSSAPI::OID (3)
- methods for handling GSSAPI OIDs and some constant OIDs
- GSSAPI::OID::Set (3)
- methods for handling sets of GSSAPI OIDs, and some con...
- GSSAPI::Status (3)
- methods for handlings GSSAPI statuses
- gst-launch-1.0 (1)
- build and run a GStreamer pipeline
- gst-launch-0.10 (1)
- build and run a GStreamer pipeline
- gst-stats-1.0 (1)
- print info gathered from a GStreamer log file
- gst-xmllaunch-0.10 (1)
- build and run a GStreamer pipeline from an XML seria...
- gtk-launch (1)
- Launch an application
- gtk-query-immodules-2.0 (1)
- Input method module registration utility
- gtk-query-immodules-3.0-64 (1)
- Input method module registration utility
- gtk-update-icon-cache (1)
- Icon theme caching utility
- gtk-update-icon-cache-2.0 (1)
- Icon theme caching utility
- gtk-update-icon-cache-3.0 (1)
- Icon theme caching utility
- guile (1)
- The GNU Project Extension Language
- guile1 (1)
- a Scheme interpreter
- gvcolor (1)
- flow colors through a ranked digraph
- gvfs-info (1)
- Show information about files
- gvfs-mime (1)
- Get or set mime handlers
- gvfs-monitor-dir (1)
- Monitor directories for changes
- gvfs-monitor-file (1)
- Monitor files for changes
- gvfs-mount (1)
- Mounts the locations
- gvfs-open (1)
- Open files with the default handler
- gvfs-trash (1)
- Move files or directories to the trash
- gvgen (1)
- generate graphs
- gvimdiff (1)
- edit two, three or four versions of a file with Vim an...
- gvmap (1)
- find clusters and create a geographical map highlighti...
- gvmap.sh (1)
- pipeline for running gvmap
- gvpack (1)
- merge and pack disjoint graphs
- gvpr (1)
- graph pattern scanning and processing language
- h2ph (1)
- convert .h C header files to .ph Perl header files
- h2xs (1)
- convert .h C header files to Perl extensions
- h_errno (3)
- get network host entry
- hack (6)
- exploring The Dungeons of Doom
- Test::HACKING (3pm)
- contributing to TAP::Harness
- halfdelay (3ncurses)
- curses input options
- halfdelay_sp (3ncurses)
- curses screen-pointer extension
- halfpipe (n)
- In-memory channel, half of a fifo2
- halftone (6x)
- simple halftone pattern of moving mass points
- halo (6x)
- draw circular patterns
- halt (8)
- Halt, power-off or reboot the machine
- handle_bad_irq (9)
- handle spurious and unhandled irqs
- handle_early_requeue_pi_wakeup (9)
- Detect early wakeup on the initial futex
- handle_edge_eoi_irq (9)
- edge eoi type IRQ handler
- handle_edge_irq (9)
- edge type IRQ handler
- handle_fasteoi_irq (9)
- irq handler for transparent controllers
- handle_level_irq (9)
- Level type irq handler
- handle_percpu_devid_irq (9)
- Per CPU local irq handler with per cpu dev ids
- handle_percpu_irq (9)
- Per CPU local irq handler
- handle_simple_irq (9)
- Simple and software-decoded IRQs.
- handle_to_fshandle (3)
- file handle operations
- hangman (6)
- computer version of the game hangman
- has160-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- has_colors (3ncurses)
- curses color manipulation routines
- has_colors_sp (3ncurses)
- curses screen-pointer extension
- has_ic (3ncurses)
- curses environment query routines
- has_ic_sp (3ncurses)
- curses screen-pointer extension
- has_il (3ncurses)
- curses environment query routines
- has_il_sp (3ncurses)
- curses screen-pointer extension
- has_key (3ncurses)
- get (or push back) characters from curses terminal key...
- has_key_sp (3ncurses)
- curses screen-pointer extension
- has_mouse (3ncurses)
- mouse interface through curses
- has_mouse_sp (3ncurses)
- curses screen-pointer extension
- hash (1p)
- remember or report utility locations
- hash (3)
- hash database access method
- Hash::Util (3)
- A selection of general-utility hash subroutines
- Hash::Util::FieldHash (3)
- Support for Inside-Out Classes
- hasmntopt (3)
- get filesystem descriptor file entry
- hattrib (1)
- change HFS file or directory attributes
- have_submounts (9)
- check for mounts over a dentry
- haveged (8)
- Generate random numbers and feed linux random device.
- hcd (1)
- change working HFS directory
- hcd_buffer_create (9)
- initialize buffer pools
- hcd_buffer_destroy (9)
- deallocate buffer pools
- hciattach (1)
- attach serial devices via UART HCI to BlueZ stack
- hciconfig (1)
- configure Bluetooth devices
- hcidump (1)
- Parse HCI data
- hcitool (1)
- configure Bluetooth connections
- hcopy (1)
- copy files from or to an HFS volume
- hcreate (3)
- hash table management
- hcreate (3p)
- manage hash search table
- hcreate_r (3)
- hash table management
- hd (4)
- MFM/IDE hard disk devices
- HDB (3pm)
- Hybrid Database - Handles multiple databases with the ...
- HDB::CMDS (3pm)
- Hybrid DataBase Commands
- HDB::Encode (3pm)
- Hybrid DataBase - HASH/ARRAY enconding.
- HDB::Object (3pm)
- Base class for persistent Class::HPLOO objects.
- hdel (1)
- delete both forks of an HFS file
- hdestroy (3)
- hash table management
- hdestroy_r (3)
- hash table management
- hdifftopam (1)
- convert horizontal difference image to original PAM image
- hdir (1)
- display an HFS directory in long format
- hdmi_audio_infoframe_init (9)
- initialize an HDMI audio infoframe
- hdmi_audio_infoframe_pack (9)
- write HDMI audio infoframe to binary buffer
- hdmi_avi_infoframe_init (9)
- initialize an HDMI AVI infoframe
- hdmi_avi_infoframe_pack (9)
- write HDMI AVI infoframe to binary buffer
- hdmi_infoframe_pack (9)
- write a HDMI infoframe to binary buffer
- hdmi_spd_infoframe_init (9)
- initialize an HDMI SPD infoframe
- hdmi_spd_infoframe_pack (9)
- write HDMI SPD infoframe to binary buffer
- hdmi_vendor_infoframe_init (9)
- initialize an HDMI vendor infoframe
- hdmi_vendor_infoframe_pack (9)
- write a HDMI vendor infoframe to binary buffer
- hdparm (8)
- get/set SATA/IDE device parameters
- head (1)
- output the first part of files
- head (1p)
- copy the first part of files
- header_checks (5)
- Postfix built-in content inspection
- heapsort (3bsd)
- sort functions
- HeightMMOfScreen (3)
- screen information functions and macros
- HeightOfScreen (3)
- screen information functions and macros
- helix (6x)
- draw helical string-art patterns
- helix2solv (1)
- convert legacy helixcode format into a solv file
- help2man (1)
- generate a simple manual page
- helper-mux (8)
- Concurrency protocol multiplexer for Squid helpers
- herror (3)
- get network host entry
- hex (n)
- Hexadecimal encoding transformation
- hexadrop (6x)
- shrinking hexagons.
- hexdump (1)
- display file contents in hexadecimal, decimal, octal, ...
- hformat (1)
- create a new HFS filesystem and make it current
- tc-hfsc (8)
- Hierarchical Fair Service Curve's control under linux
- hfsutils (1)
- tools for reading and writing Macintosh HFS volumes
- hg (1)
- Mercurial source code management system
- hgignore (5)
- syntax for Mercurial ignore files
- hgrc (5)
- configuration files for Mercurial
- hid2hci (1)
- Bluetooth HID to HCI mode switching utility
- hide_panel (3curses)
- panel stack extension for curses
- hier (7)
- description of the filesystem hierarchy
- hilbert (6x)
- 3D Hilbert fractal.
- hipstopgm (1)
- convert a HIPS file into a PGM image
- libinnhist (3)
- routines for managing INN history
- histogramscreenshots (3)
- .TH "histogramscreenshots" 3 "Mon Aug 1 2011" "Ver...
- history (5)
- record of current and recently expired Usenet articles
- history (n)
- Manipulate the history list
- hline (3ncurses)
- create curses borders, horizontal and vertical lines
- hline_set (3ncurses)
- create curses borders or lines using complex character...
- hlist_for_each_entry (9)
- iterate over list of given type
- hlist_for_each_entry_continue (9)
- iterate over a hlist continuing after cur...
- hlist_for_each_entry_from (9)
- iterate over a hlist continuing from current ...
- hlist_for_each_entry_safe (9)
- iterate over list of given type safe against ...
- hls (1)
- list files in an HFS directory
- HMAC (3osslssl-3)
- HMAC message authentication code
- HMAC_CTX_copy (3osslssl-3)
- HMAC message authentication code
- HMAC_CTX_free (3osslssl-3)
- HMAC message authentication code
- HMAC_CTX_get_md (3osslssl-3)
- HMAC message authentication code
- HMAC_CTX_new (3osslssl-3)
- HMAC message authentication code
- HMAC_CTX_reset (3osslssl-3)
- HMAC message authentication code
- HMAC_CTX_set_flags (3osslssl-3)
- HMAC message authentication code
- HMAC_Final (3osslssl-3)
- HMAC message authentication code
- HMAC_Init (3osslssl-3)
- HMAC message authentication code
- HMAC_Init_ex (3osslssl-3)
- HMAC message authentication code
- HMAC_size (3osslssl-3)
- HMAC message authentication code
- HMAC_Update (3osslssl-3)
- HMAC message authentication code
- hmkdir (1)
- create a new HFS directory
- hmount (1)
- introduce a new HFS volume and make it current
- hook (3form)
- set hooks for automatic invocation by applications
- hook (3menu)
- set hooks for automatic invocation by applications
- hook (n)
- Hooks
- hopalong (6x)
- draw real plane fractals
- host (1)
- DNS lookup utility
- host.conf (5)
- resolver configuration file
- hostid (1)
- print the numeric identifier for the current host
- hostname (1)
- show or set the system's host name
- hostname (5)
- Local hostname configuration file
- hostname (7)
- hostname resolution description
- hostnamectl (1)
- Control the system hostname
- hosts (5)
- static table lookup for hostnames
- hosts_access (3)
- access control library
- hosts_access (5)
- format of host access control files
- hosts_options (5)
- host access control language extensions
- hp-asrd (8)
- HP Advanced Server Recovery Daemon
- hp-health (4)
- HP Advanced System Health Application & Command-line U...
- hp-smh-templates (4)
- HP System Management Homepage Template package.
- hp-snmp-agents (4)
- HP Advanced System Management Application & Insight Ma...
- hp_mgmt_install (7)
- Installation options for the hp-health, hp-snmp-agents...
- hpasmcli (4)
- HP management CLI
- hpbootcfg (8)
- hp ProLiant boot configuration utility
- hpcdtoppm (1)
- convert a Photo-CD image into a PBM image
- hpftodit (1)
- create font description files for use with groff - Tlj4
- hpijs (1)
- HP IJS server for the Ghostscript IJS client driver
- hplog (8)
- hp ProLiant Integrated Management Logging (IML) utility
- hpsa (4)
- HP Smart Array SCSI driver
- hpuid (8)
- hp ProLiant Unique IDentifer (UID) utility
- hpwd (1)
- print the full path to the current HFS working directory
- hrename (1)
- rename or move an HFS file or directory
- hrmdir (1)
- remove an empty HFS directory
- hrtimer_cancel (9)
- cancel a timer and wait for the handler to finish.
- hrtimer_forward (9)
- forward the timer expiry
- hrtimer_get_remaining (9)
- get remaining time for the timer
- hrtimer_get_res (9)
- get the timer resolution for a clock
- hrtimer_init (9)
- initialize a timer to the given clock
- hrtimer_start (9)
- (re)start an hrtimer on the current CPU
- hrtimer_start_range_ns (9)
- (re)start an hrtimer on the current CPU
- hrtimer_try_to_cancel (9)
- try to deactivate a timer
- hsearch (3)
- hash table management
- hsearch_r (3)
- hash table management
- hsi_alloc_controller (9)
- Allocate an HSI controller and its ports
- hsi_alloc_msg (9)
- Allocate an HSI message
- hsi_async (9)
- Submit an HSI transfer to the controller
- hsi_async_read (9)
- Submit a read transfer
- hsi_async_write (9)
- Submit a write transfer
- hsi_claim_port (9)
- Claim the HSI client's port
- hsi_event (9)
- Notifies clients about port events
- hsi_flush (9)
- Flush all pending transactions on the client's port
- hsi_free_msg (9)
- Free an HSI message
- hsi_get_channel_id_by_name (9)
- acquire channel id by channel name
- hsi_id (9)
- Get HSI controller ID associated to a client
- hsi_port_id (9)
- Gets the port number a client is attached to
- hsi_port_unregister_clients (9)
- Unregister an HSI port
- hsi_put_controller (9)
- Free an HSI controller
- hsi_register_client_driver (9)
- Register an HSI client to the HSI bus
- hsi_register_controller (9)
- Register an HSI controller and its ports
- hsi_register_port_event (9)
- Register a client to receive port events
- hsi_release_port (9)
- Release the HSI client's port
- hsi_setup (9)
- Configure the client's port
- hsi_start_tx (9)
- Signal the port that the client wants to start a TX
- hsi_stop_tx (9)
- Signal the port that the client no longer wants to tra...
- hsi_unregister_controller (9)
- Unregister an HSI controller
- hsi_unregister_port_event (9)
- Stop receiving port events for a client
- hstrerror (3)
- get network host entry
- ht_create_irq (9)
- create an irq and attach it to a device.
- ht_destroy_irq (9)
- destroy an irq created with ht_create_irq
- tc-htb (8)
- Hierarchy Token Bucket
- htcacheclean (8)
- Clean up the disk cache
- htcacheclean2 (8)
- Clean up the disk cache
- htdbm (1)
- Manipulate DBM password databases
- htdigest (1)
- manage user files for digest authentication
- html (n)
- Procedures to generate HTML structures
- html2ps (1)
- convert HTML to PostScript
- html2psrc (5)
- configuration file format for html2ps(1)
- HTML::AsSubs (3pm)
- functions that construct a HTML syntax tree
- HTML::Element (3pm)
- Class for objects that represent HTML elements
- HTML::Element::traverse (3pm)
- discussion of HTML::Element's traverse method
- HTML::ElementGlob (3pm)
- Perl extension for managing HTML::Element based obj...
- HTML::ElementRaw (3pm)
- Perl extension for HTML::Element(3).
- HTML::ElementSuper (3pm)
- Perl extension for HTML::Element(3)
- HTML::ElementTable (3pm)
- Perl extension for manipulating a table composed o...
- HTML::Parse (3pm)
- Deprecated, a wrapper around HTML::TreeBuilder
- HTML::SimpleParse (3pm)
- a bare-bones HTML parser
- HTML::TableExtract (3pm)
- Perl module for extracting the content contained i...
- HTML::Tidy (3pm)
- (X)HTML validation in a Perl object
- HTML::Tidy::Message (3pm)
- Message object for the Tidy functionality
- HTML::TokeParser::Simple (3pm)
- Easy to use "HTML::TokeParser" interface
- HTML::TokeParser::Simple::Token (3pm)
- Base class for "HTML::TokeParser::Sim...
- HTML::TokeParser::Simple::Token::Comment (3pm)
- Token.pm comment class.
- HTML::TokeParser::Simple::Token::Decl... (3pm)
- Token.pm declaration class.
- HTML::TokeParser::Simple::Token::Proc... (3pm)
- Token.pm process instruction...
- HTML::TokeParser::Simple::Token::Tag (3pm)
- Token.pm tag class.
- HTML::TokeParser::Simple::Token::Tag:... (3pm)
- Token.pm "end tag" class.
- HTML::TokeParser::Simple::Token::Tag:... (3pm)
- Token.pm "start tag" class.
- HTML::TokeParser::Simple::Token::Text (3pm)
- Token.pm text class.
- HTML::Tree (3pm)
- build and scan parse-trees of HTML
- HTML::Tree::AboutObjects (3pm)
- - article: "User's View of Object-Oriented M...
- HTML::Tree::AboutTrees (3pm)
- - article on tree-shaped data structures in Perl
- HTML::Tree::Scanning (3pm)
- - article: "Scanning HTML"
- HTML::TreeBuilder (3pm)
- Parser that builds a HTML syntax tree
- htmldoc (1)
- convert html source files into html, postscript, or pdf.
- htmlparse (n)
- Procedures to parse HTML strings
- htobe16 (3)
- convert values between host and big-/little-endian byt...
- htobe32 (3)
- convert values between host and big-/little-endian byt...
- htobe64 (3)
- convert values between host and big-/little-endian byt...
- htole16 (3)
- convert values between host and big-/little-endian byt...
- htole32 (3)
- convert values between host and big-/little-endian byt...
- htole64 (3)
- convert values between host and big-/little-endian byt...
- htonl (3)
- convert values between host and network byte order
- htonl (3p)
- convert values between host and network byte order
- htons (3)
- convert values between host and network byte order
- htpasswd (1)
- Manage user files for basic authentication
- http (n)
- Client-side implementation of the HTTP/1.1 protocol
- HTTP::Headers::Auth (3)
- (unknown subject)
- HTTP::Headers::ETag (3)
- (unknown subject)
- httpcfg (1)
- Mono Certificate Management for HttpListener
- httpd (8)
- Apache Hypertext Transfer Protocol Server
- httpd2 (8)
- Apache Hypertext Transfer Protocol Server
- httxt2dbm (1)
- Generate dbm files for use with RewriteMap
- huddle (n)
- Create and manipulate huddle object
- HUGE_VAL (3)
- floating-point constants
- HUGE_VALF (3)
- floating-point constants
- HUGE_VALL (3)
- floating-point constants
- hugin (1)
- Hugin panorama creator
- hugin_hdrmerge (1)
- Merge overlapping images
- hugin_stitch_project (1)
- Stitch a hugin project
- humanize_number (3bsd)
- format a number into a human readable form and vicev...
- humount (1)
- remove an HFS volume from the list of known volumes
- hunspell (1)
- spell checker, stemmer and morphological analyzer
- hunspell (3)
- spell checking, stemming, morphological generation and...
- hunspell (4)
- format of Hunspell dictionaries and affix files
- hunt (6)
- a multi-player multi-terminal game
- huntd (6)
- hunt daemon, back-end for hunt game
- hunzip (1)
- decompress and decrypt hzip files to the standard output
- hvol (1)
- display or change the current HFS volume
- hwclock (8)
- query or set the hardware clock (RTC)
- hwinfo (8)
- probe for hardware
- hypertorus (6x)
- Draws a hypertorus that rotates in 4d
- hypnowheel (6x)
- draws overlapping, translucent spiral patterns
- hypot (3)
- Euclidean distance function
- hypot (3p)
- Euclidean distance function
- hypotf (3)
- Euclidean distance function
- hypotl (3)
- Euclidean distance function
- hzip (1)
- compress and encrypt dictionary files
- I18N::Collate (3)
- compare 8-bit scalar data according to the current locale
- I18N::LangTags (3)
- functions for dealing with RFC3066-style language tags
- I18N::LangTags::Detect (3)
- detect the user's language preferences
- I18N::LangTags::List (3)
- - tags and names for human languages
- i2c_dp_aux_add_bus (9)
- register an i2c adapter using the aux ch helper
- i2c_release_client (9)
- release a use of the i2c client structure
- i2c_use_client (9)
- increments the reference count of the i2c client struc...
- i2d_ASIdentifierChoice (3osslssl-3)
- convert objects from/to ASN.1/DER repre...
- i2d_AUTHORITY_INFO_ACCESS (3osslssl-3)
- convert objects from/to ASN.1/DER re...
- i2d_AUTHORITY_KEYID (3osslssl-3)
- convert objects from/to ASN.1/DER represen...
- i2d_DHparams (3osslssl-3)
- DEPRECATED
- i2d_DHparams_bio (3osslssl-3)
- DEPRECATED
- i2d_DHparams_fp (3osslssl-3)
- DEPRECATED
- i2d_DHxparams (3osslssl-3)
- convert objects from/to ASN.1/DER representation
- i2d_IPAddressChoice (3osslssl-3)
- convert objects from/to ASN.1/DER represen...
- i2d_NAMING_AUTHORITY (3osslssl-3)
- convert objects from/to ASN.1/DER represe...
- i2d_OSSL_CMP_PKIHEADER (3osslssl-3)
- convert objects from/to ASN.1/DER repre...
- i2d_OTHERNAME (3osslssl-3)
- convert objects from/to ASN.1/DER representation
- i2o_block_check_events (9)
- Have we seen a media change?
- i2o_block_device_flush (9)
- Flush all dirty data of I2O device dev
- i2o_block_device_free (9)
- free the memory of the I2O Block device
- i2o_block_device_lock (9)
- Locks the media of device dev
- i2o_block_device_mount (9)
- Mount (load) the media of device dev
- i2o_block_device_unlock (9)
- Unlocks the media of device dev
- i2o_block_open (9)
- Open the block device
- i2o_block_release (9)
- Release the I2O block device
- i2o_block_remove (9)
- remove the I2O Block device from the system again
- i2o_block_reply (9)
- Block OSM reply handler.
- i2o_block_request_fn (9)
- request queue handling function
- i2o_block_sglist_alloc (9)
- Allocate the SG list and map it
- i2o_block_sglist_free (9)
- Frees the SG list
- i2o_block_transfer (9)
- Transfer a request to/from the I2O controller
- i2o_bus_match (9)
- Tell if I2O device class id matches the class ids of t...
- i2o_bus_remove (9)
- remove the I2O Bus Adapter device from the system again
- i2o_bus_scan (9)
- Scan the bus for new devices
- i2o_bus_store_scan (9)
- Scan the I2O Bus Adapter
- i2o_cntxt_list_get (9)
- Get a pointer from the context list and remove it
- i2o_cntxt_list_get_ptr (9)
- Get a context id from the context list
- i2o_cntxt_list_remove (9)
- Remove a pointer from the context list
- i2o_device_add (9)
- allocate a new I2O device and add it to the IOP
- i2o_device_claim_release (9)
- release a device that the OSM is using
- i2o_device_parse_lct (9)
- Parse a previously fetched LCT and create devices
- i2o_device_release (9)
- release the memory for a I2O device
- i2o_device_remove (9)
- remove an I2O device from the I2O core
- i2o_driver_dispatch (9)
- dispatch an I2O reply message
- i2o_exec_event (9)
- Event handling function
- i2o_exec_exit (9)
- Removes the Exec OSM
- i2o_exec_init (9)
- Registers the Exec OSM
- i2o_exec_lct_get (9)
- Get the IOP's Logical Configuration Table
- i2o_exec_lct_notify (9)
- Send a asynchronus LCT NOTIFY request
- i2o_exec_reply (9)
- I2O Executive reply handler
- i2o_exec_show_product_id (9)
- Displays Product ID of controller
- i2o_exec_show_vendor_id (9)
- Displays Vendor ID of controller
- i2o_flush_reply (9)
- Flush reply from I2O controller
- i2o_iop_activate (9)
- Bring controller up to HOLD
- i2o_iop_add (9)
- Initialize the I2O controller and add him to the I2O core
- i2o_iop_clear (9)
- Bring I2O controller into HOLD state
- i2o_iop_enable_all (9)
- Enables all controllers on the system
- i2o_iop_free (9)
- Free the i2o_controller struct
- i2o_iop_init_outbound_queue (9)
- setup the outbound message queue
- i2o_iop_quiesce_all (9)
- Quiesce all I2O controllers on the system
- i2o_iop_release (9)
- release the memory for a I2O controller
- i2o_iop_remove (9)
- Remove the I2O controller from the I2O core
- i2o_iop_systab_set (9)
- Set the I2O System Table of the specified IOP
- i2o_msg_get (9)
- obtain an I2O message from the IOP
- i2o_msg_get_wait (9)
- obtain an I2O message from the IOP
- i2o_msg_nop (9)
- Returns a message which is not used
- i2o_msg_nop_mfa (9)
- Returns a fetched MFA back to the controller
- i2o_msg_post_wait_mem (9)
- Post and wait a message with DMA buffers
- i2o_parse_hrt (9)
- Parse the hardware resource table.
- i2o_pci_free (9)
- Frees the DMA memory for the I2O controller
- i2o_pci_interrupt (9)
- Interrupt handler for I2O controller
- i2o_pci_probe (9)
- Probe the PCI device for an I2O controller
- i2o_pci_remove (9)
- Removes a I2O controller from the system
- i2o_proc_device_add (9)
- Add an I2O device to the proc dir
- i2o_proc_fs_create (9)
- Create the i2o proc fs.
- i2o_proc_fs_destroy (9)
- Cleanup the all i2o proc entries
- i2o_proc_iop_add (9)
- Add an I2O controller to the i2o proc tree
- i2o_scsi_get_host (9)
- Get an I2O SCSI host
- i2o_scsi_reply (9)
- SCSI OSM message reply handler
- i2o_status_get (9)
- Get the status block from the I2O controller
- i386 (8)
- change reported architecture in new program environmen...
- i915_cmd_parser_get_version (9)
- get the cmd parser version number
- i915_needs_cmd_parser (9)
- should a given ring use software command parsing?
- i915_parse_cmds (9)
- parse a submitted batch buffer for privilege violations
- ibv_ack_async_event (3)
- get or acknowledge asynchronous events
- ibv_asyncwatch (1)
- display asynchronous events
- ibv_attach_mcast (3)
- attach and detach a queue pair (QPs) to/from a multica...
- ibv_create_ah (3)
- create or destroy an address handle (AH)
- ibv_create_ah_from_wc (3)
- initialize or create an address handle (AH) from ...
- ibv_create_comp_channel (3)
- create or destroy a completion event channel
- ibv_create_srq (3)
- create or destroy a shared receive queue (SRQ)
- ibv_create_srq_ex (3)
- create or destroy a shared receive queue (SRQ)
- ibv_destroy_ah (3)
- create or destroy an address handle (AH)
- ibv_destroy_comp_channel (3)
- create or destroy a completion event channel
- ibv_destroy_srq (3)
- create or destroy a shared receive queue (SRQ)
- ibv_detach_mcast (3)
- attach and detach a queue pair (QPs) to/from a multica...
- ibv_get_async_event (3)
- get or acknowledge asynchronous events
- ibv_get_srq_num (3)
- return srq number associated with the given shared rec...
- ibv_init_ah_from_wc (3)
- initialize or create an address handle (AH) from a ...
- ibv_modify_qp (3)
- modify the attributes of a queue pair (QP)
- ibv_modify_srq (3)
- modify attributes of a shared receive queue (SRQ)
- ibv_open_qp (3)
- open a shareable queue pair (QP)
- ibv_post_srq_recv (3)
- post a list of work requests (WRs) to a shared receiv...
- ibv_query_qp (3)
- get the attributes of a queue pair (QP)
- ibv_query_srq (3)
- get the attributes of a shared receive queue (SRQ)
- ibv_srq_pingpong (1)
- simple InfiniBand shared receive queue test
- iceauth (1)
- ICE authority file utility
- icecc-scheduler (1)
- Icecream scheduler
- icedax (1)
- a sampling utility that dumps CD audio data into wav s...
- ich_pata_cable_detect (9)
- Probe host controller cable detect info
- ich_set_dmamode (9)
- Initialize host controller PATA DMA timings
- ico (1)
- animate an icosahedron or other polyhedron
- iconv (1)
- convert text from one character encoding to another
- iconv (3)
- perform character set conversion
- iconv.h (0p)
- codeset conversion facility
- iconv_close (3)
- deallocate descriptor for character set conversion
- iconv_open (3)
- allocate descriptor for character set conversion
- iconvconfig (8)
- create iconv module configuration cache
- icpfind (1)
- Use heuristic control-point detection strategies
- icuexportdata (1)
- Writes text files with Unicode properties data from ICU.
- icupkg (8)
- extract or modify an ICU .dat archive
- ida_destroy (9)
- release all cached layers within an ida tree
- ida_init (9)
- initialize ida handle
- ida_remove (9)
- remove the given ID
- identify (1)
- describes the format and characteristics of one or mor...
- idlj-java-1.7.0-openjdk (1)
- The IDL-to-Java Compiler
- idmap_hash (8)
- Samba's idmap_hash Backend for Winbind
- idn2_check_version (3)
- API function
- idr_alloc_cyclic (9)
- allocate new idr entry in a cyclical fashion
- idr_destroy (9)
- release all cached layers within an idr tree
- idr_for_each (9)
- iterate through all stored pointers
- idr_init (9)
- initialize idr handle
- idr_remove (9)
- remove the given id and free its slot
- ieee80211_alloc_hw (9)
- Allocate a new hardware device
- ieee80211_beacon_loss (9)
- inform hardware does not receive beacons
- ieee80211_bss_get_ie (9)
- find IE with given ID
- ieee80211_channel_to_frequency (9)
- convert channel number to frequency
- ieee80211_create_tpt_led_trigger (9)
- create throughput LED trigger
- ieee80211_ctstoself_duration (9)
- Get the duration field for a CTS-to-self f...
- ieee80211_find_sta_by_ifaddr (9)
- find a station on hardware
- ieee80211_free_hw (9)
- free hardware descriptor
- ieee80211_frequency_to_channel (9)
- convert frequency to channel number
- ieee80211_generic_frame_duration (9)
- Calculate the duration field for a frame
- ieee80211_get_channel (9)
- get channel struct from wiphy for specified frequ...
- ieee80211_get_hdrlen_from_skb (9)
- get header length from data
- ieee80211_get_tkip_p1k (9)
- get a TKIP phase 1 key
- ieee80211_get_tkip_p1k_iv (9)
- get a TKIP phase 1 key for IV32
- ieee80211_get_tkip_p2k (9)
- get a TKIP phase 2 key
- ieee80211_hdrlen (9)
- get header length in bytes from frame control
- ieee80211_queue_delayed_work (9)
- add work onto the mac80211 workqueue
- ieee80211_queue_stopped (9)
- test status of the queue
- ieee80211_queue_work (9)
- add work onto the mac80211 workqueue
- ieee80211_register_hw (9)
- Register hardware device
- ieee80211_rts_duration (9)
- Get the duration field for an RTS frame
- ieee80211_scan_completed (9)
- completed hardware scan
- ieee80211_unregister_hw (9)
- Unregister a hardware device
- if (3)
- "use" a Perl module if a condition holds
- ifcfg-bridge (5)
- ethernet bridge interface configuration
- ifcfg-dhcp (5)
- common DHCPv4 and DHCPv6 elements of network interface...
- ifcfg-ovs-bridge (5)
- openvswitch bridge configuration
- ifplugd (8)
- A link detection daemon for ethernet devices
- ifstatus (8)
- show the state of a (pre-configured) network interface.
- ifroute (5)
- configure the interface static routing tables
- iftab (5)
- static information about the network interfaces
- iftop (8)
- display bandwidth usage on an interface by host
- igawk (1)
- gawk with include files
- ijs-config (1)
- script to get information about the installed version ...
- ilookup (9)
- search for an inode in the inode cache
- ilookup5 (9)
- search for an inode in the inode cache
- ilookup5_nowait (9)
- search for an inode in the inode cache
- Image::ExifTool::AES (3pm)
- AES encryption with cipher-block chaining
- Image::ExifTool::Charset (3pm)
- ExifTool character encoding routines
- Image::ExifTool::Fixup (3pm)
- Utility to handle pointer fixups
- Image::ExifTool::Flash (3pm)
- Read Shockwave Flash meta information
- Image::ExifTool::FlashPix (3pm)
- Read FlashPix meta information
- Image::ExifTool::H264 (3pm)
- Read meta information from H.264 video
- Image::ExifTool::HP (3pm)
- Hewlett-Packard maker notes tags
- Image::ExifTool::HTML (3pm)
- Read HTML meta information
- Image::ExifTool::HtmlDump (3pm)
- Dump information in hex to HTML page
- Image::ExifTool::Lang::cs (3pm)
- ExifTool Czech language translations
- Image::ExifTool::Lang::en_ca (3pm)
- ExifTool Canadian English language trans...
- Image::ExifTool::Lang::en_gb (3pm)
- ExifTool British English language transl...
- Image::ExifTool::Lang::es (3pm)
- ExifTool Spanish language translations
- Image::ExifTool::Lang::fi (3pm)
- ExifTool Finnish language translations
- Image::ExifTool::Lang::fr (3pm)
- ExifTool French language translations
- Image::ExifTool::Lang::nl (3pm)
- ExifTool Dutch language translations
- Image::ExifTool::Lang::pl (3pm)
- ExifTool Polish language translations
- Image::ExifTool::Lang::sv (3pm)
- ExifTool Swedish language translations
- Image::ExifTool::Lang::tr (3pm)
- ExifTool Turkish language translations
- Image::ExifTool::Lang::zh_cn (3pm)
- ExifTool Simplified Chinese language tra...
- Image::ExifTool::Lang::zh_tw (3pm)
- ExifTool Traditional Chinese language tr...
- Image::ExifTool::LNK (3pm)
- Read MS Shell Link (.LNK) meta information
- Image::ExifTool::M2TS (3pm)
- Read M2TS (AVCHD) meta information
- Image::ExifTool::Pentax (3pm)
- Pentax/Asahi maker notes tags
- Image::ExifTool::PGF (3pm)
- Read Progressive Graphics File meta information
- Image::ExifTool::PhaseOne (3pm)
- Phase One maker notes tags
- Image::ExifTool::PhotoCD (3pm)
- Read Kodak Photo CD Image Pac (PCD) metadata
- Image::ExifTool::PhotoMechanic (3pm)
- Read/write Photo Mechanic information
- Image::ExifTool::Photoshop (3pm)
- Read/write Photoshop IRB meta information
- Image::ExifTool::PSP (3pm)
- Read Paint Shop Pro meta information
- Image::ExifTool::Radiance (3pm)
- Read Radiance RGBE HDR meta information
- Image::ExifTool::Ricoh (3pm)
- Ricoh EXIF maker notes tags
- Image::ExifTool::RTF (3pm)
- Read Rich Text Format meta information
- Image::ExifTool::Shift (3pm)
- ExifTool time shifting routines
- Image::ExifTool::Shortcuts (3pm)
- ExifTool shortcut tags
- Image::ExifTool::Theora (3pm)
- Read Theora video meta information
- Image::ExifTool::WritePhotoshop (3pm)
- Write Photoshop IRB meta information
- Image::ExifTool::ZIP (3pm)
- Read ZIP archive meta information
- ImageMagick (1)
- is a free software suite for the creation, modificatio...
- imake (1)
- C preprocessor interface to the make utility
- imapfeed (8)
- Multi-host, multi-connection, streaming NNTP feeder
- imaxabs (3)
- compute the absolute value of an integer
- img-gif (n)
- Img, Graphics Interchange Format (gif)
- img-pcx (n)
- Img, Paintbrush Format (pcx)
- img-png (n)
- Img, Portable Network Graphics format (png)
- imgtoppm (1)
- convert an Img-whatnot file into a PPM image
- IMPLEMENT_LHASH_COMP_FN (3osslssl-3)
- dynamic hash table
- IMPLEMENT_LHASH_HASH_FN (3osslssl-3)
- dynamic hash table
- IMPORT_FOREIGN_SCHEMA (7pg161)
- import table definitions from a foreign server
- Importer (3pm)
- Alternative but compatible interface to modules that e...
- in_wch (3ncurses)
- extract a complex character and rendition from a window
- in_wchnstr (3ncurses)
- get an array of complex characters and renditions fro...
- in_wchstr (3ncurses)
- get an array of complex characters and renditions from...
- inch (3ncurses)
- get a character and attributes from a curses window
- inchnstr (3ncurses)
- get a string of characters (and attributes) from a cur...
- inchstr (3ncurses)
- get a string of characters (and attributes) from a cur...
- incr (n)
- Increment the value of a variable
- indent (1)
- changes the appearance of a C program by inserting or ...
- index (3)
- locate character in string
- indirect (3)
- Lexically warn about using the indirect method call sy...
- indirect (3pm)
- Lexically warn about using the indirect method call sy...
- indxbib (1)
- make inverted index for bibliographic databases
- inews (1)
- Post a Usenet article to the local news server
- infnan (3)
- deal with infinite or not-a-number (NaN) result
- info (n)
- Return information about the state of the Tcl interpreter
- init_rcu_head_on_stack (9)
- initialize on-stack rcu_head for debugobjects
- init_rs (9)
- Find a matching or allocate a new rs control structure
- init_rs_non_canonical (9)
- Find a matching or allocate a new rs control stru...
- init_selinuxmnt (3)
- initialize the global variable selinux_mnt
- initChainBuffers (9)
- Allocate memory for and initialize chain buffers
- initgroups (3)
- initialize the supplementary group access list
- inkscape (1)
- an SVG (Scalable Vector Graphics) editing program.
- inkscape.fr (1)
- programme d'dition SVG (Scalable Vector Graphics).
- inkscape.ja (1)
- SVG (Scalable Vector Graphics)
- inkscape.sk (1)
- editor SVG (Scalable Vector Graphics).
- inkview (1)
- slideshow program which uses SVG files
- Inline (3pm)
- Write Perl subroutines in other programming languages.
- Inline-API (3pm)
- How to bind a programming language to Perl using Inlin...
- Inline-FAQ (3pm)
- The Inline FAQ
- Inline::C::ParseRecDescent (3pm)
- The Classic Inline::C Parser
- Inline::C::ParseRegExp (3pm)
- The New and Improved Inline::C Parser
- inn-radius.conf (5)
- Configuration for nnrpd RADIUS authenticator
- INN::Config (3pm)
- Export all the variables an INN Perl script might need
- INN::Utils::Shlock (3pm)
- Wrapper around the shlock program
- innbind (8)
- Helper program to bind sockets to privileged ports
- inncheck (8)
- Check INN configuration and database files
- innetgr (3)
- handle network group entries
- innfeed (8)
- Multi-host, multi-connection, streaming NNTP feeder
- innochecksum (1)
- offline InnoDB file checksum utility
- innstat (8)
- print snapshot of INN system
- innstr (3ncurses)
- get a string of characters from a curses window
- innwatch (8)
- monitor innd.
- innwatch.ctl (5)
- control Usenet supervision by innwatch
- innwstr (3ncurses)
- get a string of wchar_t characters from a curses window
- innxbatch (8)
- send xbatched Usenet articles to a remote NNTP server
- inode_dio_wait (9)
- wait for outstanding DIO requests to finish
- inode_owner_or_capable (9)
- check current task permissions to inode
- inode_permission (9)
- Check for access rights to a given inode
- inode_sb_list_add (9)
- add inode to the superblock list of inodes
- inotify_add_watch (2)
- add a watch to an initialized inotify instance
- inotify_rm_watch (2)
- remove an existing watch from an inotify instance
- inpaths (8)
- Report Usenet Path: statistics (new inpaths)
- input_ff_event (9)
- generic handler for force-feedback events
- input_handler_for_each_handle (9)
- handle iterator
- input_inject_event (9)
- send input event from input handler
- input_mt_assign_slots (9)
- perform a best-match assignment
- input_mt_destroy_slots (9)
- frees the MT slots of the input device
- input_mt_get_slot_by_key (9)
- return slot matching key
- input_mt_sync_frame (9)
- synchronize mt frame
- input_register_device (9)
- register device with input core
- input_register_handle (9)
- register a new input handle
- input_register_handler (9)
- register a new input handler
- input_reset_device (9)
- reset/restore the state of input device
- input_set_events_per_packet (9)
- tell handlers about the driver event rate
- input_unregister_handle (9)
- unregister an input handle
- input_unregister_handler (9)
- unregisters an input handler
- ins_nwstr (3ncurses)
- insert a wide-character string into a curses window
- ins_wch (3ncurses)
- insert a complex character and rendition into a window
- ins_wstr (3ncurses)
- insert a wide-character string into a curses window
- insch (3ncurses)
- insert a character before cursor in a curses window
- insert_resource (9)
- Inserts a resource in the resource tree
- insert_resource_conflict (9)
- Inserts resource in the resource tree
- insert_resource_expand_to_fit (9)
- Insert a resource into the resource tree
- insmod (8)
- Simple program to insert a module into the Linux Kernel
- install (3)
- Dummy module that prevents unexpected results from the...
- install (3pm)
- Dummy module that prevents unexpected results from the...
- install_deps.pl (1)
- install dependencies with package manager or CPAN
- installcheck (1)
- find out which packages cannot be installed
- instmodsh (1)
- A shell to examine installed modules
- instr (3ncurses)
- get a string of characters from a curses window
- integer (3)
- Perl pragma to use integer arithmetic instead of float...
- intel_lid (1)
- Polls the values of different reports about laptop lid...
- intel_audio_dump (1)
- Dumps the Intel GPU registers for HDMI audio setup.
- intel_bios_dumper (1)
- Saves the Intel video BIOS contents to a file.
- intel_gtt (1)
- Dump the contents of an Intel GPU's GTT
- intel_infoframes (1)
- View and change HDMI InfoFrames
- intel_panel_fitter (1)
- Change the panel fitter settings
- intel_reg_dumper (1)
- Decode a bunch of Intel GPU registers for debugging
- intel_stepping (1)
- Display the stepping information for an Intel GPU
- intel_upload_blit_large (1)
- microbenchmark of Intel GPU performance
- intel_upload_blit_large_gtt (1)
- microbenchmark of Intel GPU performance
- intel_upload_blit_large_map (1)
- microbenchmark of Intel GPU performance
- intel_upload_blit_small (1)
- microbenchmark of Intel GPU performance
- interaggregate (6x)
- Visualize the momentary and aggregate intersections be...
- interdiff (1)
- show differences between two diff files
- intermomentary (6x)
- Visualize the momentary and aggregate intersections be...
- intltool-extract (8)
- generate header files which can be read by gettext
- intltool-update (8)
- updates PO template file and merge translations with it
- intrflush (3ncurses)
- curses input options
- intrflush_sp (3ncurses)
- curses screen-pointer extension
- inttypes.h (0p)
- fixed size integer types
- invalidate_mapping_pages (9)
- Invalidate all the unlocked pages of one inode
- inwstr (3ncurses)
- get a string of wchar_t characters from a curses window
- IO::AtomicFile (3pm)
- write a file which is updated atomically
- IO::Dir (3)
- supply object methods for directory handles
- IO::File (3)
- supply object methods for filehandles
- IO::Handle (3)
- supply object methods for I/O handles
- IO::InnerFile (3pm)
- define a file inside another file
- IO::Pipe (3)
- supply object methods for pipes
- IO::Seekable (3)
- supply seek based methods for I/O objects
- IO::Select (3)
- OO interface to the select system call
- IO::Wrap (3pm)
- wrap raw filehandles in IO::Handle interface
- IO::WrapTie (3pm)
- wrap tieable objects in IO::Handle interface
- io_cancel (2)
- cancel an outstanding asynchronous I/O operation
- io_destroy (2)
- destroy an asynchronous I/O context
- io_getevents (2)
- read asynchronous I/O events from the completion queue
- io_setup (2)
- create an asynchronous I/O context
- io_submit (2)
- submit asynchronous I/O blocks for processing
- ionice (1)
- set or get process I/O scheduling class and priority
- iopl (2)
- change I/O privilege level
- ioprio_get (2)
- get/set I/O scheduling class and priority
- ioprio_set (2)
- get/set I/O scheduling class and priority
- ioremap_nocache (9)
- map bus memory into CPU space
- ip (8)
- show / manipulate routing, devices, policy routing and...
- ip-mroute (8)
- multicast routing cache management
- ip-neighbour (8)
- neighbour/arp tables management.
- ip-ntable (8)
- neighbour table configuration
- ip2cc (1)
- lookup country from IP address or hostname
- IPAddressChoice_free (3osslssl-3)
- ASN1 object utilities
- IPAddressChoice_new (3osslssl-3)
- ASN1 object utilities
- ipc (5)
- System V interprocess communication mechanisms
- IPC::Open2 (3)
- open a process for both reading and writing using open2()
- IPC::Open3 (3)
- open a process for reading, writing, and error handlin...
- IPC::Semaphore (3)
- SysV Semaphore IPC object class
- IPC::SharedMem (3)
- SysV Shared Memory IPC object class
- ipc_check_perms (9)
- check security and permissions for an ipc object
- ipc_get_maxid (9)
- get the last assigned id
- ipc_lock (9)
- lock an ipc structure without rwsem held
- ipc_obtain_object_check (9)
- (unknown subject)
- ipc_update_perm (9)
- update the permissions of an ipc object
- ipcctl_pre_down_nolock (9)
- retrieve an ipc and check permissions for some I...
- ipcperms (9)
- check ipc permissions
- ipcrm (1p)
- remove an XSI message queue, semaphore set, or shared ...
- ipcs (1)
- show information on IPC facilities
- ippeveprinter (1)
- an ipp everywhere printer application for cups
- iptables-extensions (8)
- list of extensions in the standard iptables distrib...
- ipython (1)
- Tools for Interactive Computing in Python.
- irb (1)
- Interactive Ruby Shell
- irb.ruby2.1 (1)
- Interactive Ruby Shell
- irb.ruby3.2 (1)
- Interactive Ruby Shell
- ircat (1)
- print strings when pressing buttons
- irexec (1)
- run programs with one button press
- irq_alloc_domain_generic_chips (9)
- Allocate generic chips for an irq domain
- irq_alloc_generic_chip (9)
- Allocate a generic chip and initialize it
- irq_force_affinity (9)
- Force the irq affinity of a given irq
- irq_gc_mask_clr_bit (9)
- Mask chip via clearing bit in mask register
- irq_gc_mask_set_bit (9)
- Mask chip via setting bit in mask register
- irq_get_domain_generic_chip (9)
- Get a pointer to the generic chip of a hw_irq
- irq_remove_generic_chip (9)
- Remove a chip
- irq_set_affinity (9)
- Set the irq affinity of a given irq
- irq_set_affinity_notifier (9)
- control notification of IRQ affinity changes
- irq_set_chip (9)
- set the irq chip for an irq
- irq_set_chip_data (9)
- set irq chip data for an irq
- irq_set_handler_data (9)
- set irq handler data for an irq
- irq_set_irq_type (9)
- set the irq trigger type for an irq
- irq_setup_alt_chip (9)
- Switch to alternative chip
- irq_setup_generic_chip (9)
- Setup a range of interrupts with a generic chip
- irq_wake_thread (9)
- wake the irq thread for the action identified by dev_id
- irqbalance (1)
- distribute hardware interrupts across processors on a ...
- irrecord (1)
- application for recording IR-codes for usage with LIRC
- is_broadcast_ether_addr (9)
- Determine if the Ethernet address is broadcast
- is_context_customizable (3)
- check whether SELinux context type is customiza...
- is_etherdev_addr (9)
- Tell if given Ethernet address belongs to the device.
- is_global_init (9)
- check if a task structure is init
- is_idle_task (9)
- is the specified task an idle task?
- is_linetouched (3ncurses)
- curses refresh control routines
- is_link_local_ether_addr (9)
- Determine if given Ethernet address is link-local
- is_local_ether_addr (9)
- Determine if the Ethernet address is locally-assign...
- is_multicast_ether_addr (9)
- Determine if the Ethernet address is a multicast.
- is_selinux_enabled (3)
- check whether SELinux is enabled
- is_selinux_mls_enabled (3)
- check whether SELinux is enabled
- is_term_resized (3ncurses)
- change the curses terminal size
- is_unicast_ether_addr (9)
- Determine if the Ethernet address is unicast
- is_valid_ether_addr (9)
- Determine if the given Ethernet address is valid
- is_wintouched (3ncurses)
- curses refresh control routines
- is_zero_ether_addr (9)
- Determine if give Ethernet address is all zeros.
- isalnum (3)
- character classification functions
- isalnum (3p)
- test for an alphanumeric character
- isalnum_l (3)
- character classification functions
- isalpha (3)
- character classification functions
- isalpha (3p)
- test for an alphabetic character
- isspace (3)
- character classification functions
- isascii (3)
- character classification functions
- isascii (3p)
- test for a 7-bit US-ASCII character
- isascii_l (3)
- character classification functions
- isatty (3)
- test whether a file descriptor refers to a terminal
- isblank (3)
- character classification functions
- isblank (3p)
- test for a blank character
- isblank_l (3)
- character classification functions
- iscntrl (3)
- character classification functions
- iscntrl (3p)
- test for a control character
- iscntrl_l (3)
- character classification functions
- iscsi_block_scsi_eh (9)
- block scsi eh until session state has transistioned
- iscsi_create_flashnode_conn (9)
- Add flashnode conn entry in sysfs
- iscsi_create_flashnode_sess (9)
- Add flashnode session entry in sysfs
- iscsi_destroy_all_flashnode (9)
- destroy all flashnode session entries
- iscsi_destroy_flashnode_sess (9)
- destroy flashnode session entry
- iscsi_find_flashnode_conn (9)
- finds flashnode connection entry
- iscsi_find_flashnode_sess (9)
- finds flashnode session entry
- iscsi_is_flashnode_conn_dev (9)
- verify passed device is to be flashnode conn
- iscsi_scan_finished (9)
- helper to report when running scans are done
- isdigit (3)
- character classification functions
- isdigit_l (3)
- character classification functions
- isgraph (3)
- character classification functions
- isgraph (3p)
- test for a visible character
- isgraph_l (3)
- character classification functions
- isgreater (3)
- floating-point relational tests without exception for NaN
- isgreater (3p)
- test if x greater than y
- isgreaterequal (3)
- floating-point relational tests without exception for NaN
- isgreaterequal (3p)
- test if x is greater than or equal to y
- isless (3)
- floating-point relational tests without exception for NaN
- isless (3p)
- test if x is less than y
- islessequal (3)
- floating-point relational tests without exception for NaN
- islessequal (3p)
- test if x is less than or equal to y
- islessgreater (3)
- floating-point relational tests without exception for NaN
- islessgreater (3p)
- test if x is less than or greater than y
- islower (3)
- character classification functions
- islower_l (3)
- character classification functions
- iso-8859-1 (7)
- ISO 8859-1 character set encoded in octal, decimal, an...
- iso-8859-10 (7)
- ISO 8859-10 character set encoded in octal, decimal, a...
- iso-8859-11 (7)
- ISO 8859-11 character set encoded in octal, decimal, a...
- iso-8859-13 (7)
- ISO 8859-13 character set encoded in octal, decimal, a...
- iso-8859-14 (7)
- ISO 8859-14 character set encoded in octal, decimal, a...
- iso-8859-15 (7)
- ISO 8859-15 character set encoded in octal, decimal, a...
- iso-8859-16 (7)
- ISO 8859-16 character set encoded in octal, decimal, a...
- iso-8859-2 (7)
- ISO 8859-2 character set encoded in octal, decimal, an...
- iso-8859-3 (7)
- ISO 8859-3 character set encoded in octal, decimal, an...
- iso-8859-4 (7)
- ISO 8859-4 character set encoded in octal, decimal, an...
- iso-8859-5 (7)
- ISO 8859-5 character set encoded in octal, decimal, an...
- iso-8859-6 (7)
- ISO 8859-6 character set encoded in octal, decimal, an...
- iso-8859-7 (7)
- ISO 8859-7 character set encoded in octal, decimal, an...
- iso-8859-8 (7)
- ISO 8859-8 character set encoded in octal, decimal, an...
- iso-8859-9 (7)
- ISO 8859-9 character set encoded in octal, decimal, an...
- iso646.h (0p)
- alternative spellings
- iso_8859-1 (7)
- ISO 8859-1 character set encoded in octal, decimal, an...
- iso_8859-10 (7)
- ISO 8859-10 character set encoded in octal, decimal, a...
- iso_8859-11 (7)
- ISO 8859-11 character set encoded in octal, decimal, a...
- iso_8859-13 (7)
- ISO 8859-13 character set encoded in octal, decimal, a...
- iso_8859-14 (7)
- ISO 8859-14 character set encoded in octal, decimal, a...
- iso_8859-15 (7)
- ISO 8859-15 character set encoded in octal, decimal, a...
- iso_8859-16 (7)
- ISO 8859-16 character set encoded in octal, decimal, a...
- iso_8859-2 (7)
- ISO 8859-2 character set encoded in octal, decimal, an...
- iso_8859-3 (7)
- ISO 8859-3 character set encoded in octal, decimal, an...
- iso_8859-4 (7)
- ISO 8859-4 character set encoded in octal, decimal, an...
- iso_8859-5 (7)
- ISO 8859-5 character set encoded in octal, decimal, an...
- iso_8859-6 (7)
- ISO 8859-6 character set encoded in octal, decimal, an...
- iso_8859-7 (7)
- ISO 8859-7 character set encoded in octal, decimal, an...
- iso_8859-8 (7)
- ISO 8859-8 character set encoded in octal, decimal, an...
- iso_8859-9 (7)
- ISO 8859-9 character set encoded in octal, decimal, an...
- iso_8859_1 (7)
- ISO 8859-1 character set encoded in octal, decimal, an...
- iso_8859_10 (7)
- ISO 8859-10 character set encoded in octal, decimal, a...
- iso_8859_11 (7)
- ISO 8859-11 character set encoded in octal, decimal, a...
- iso_8859_13 (7)
- ISO 8859-13 character set encoded in octal, decimal, a...
- iso_8859_14 (7)
- ISO 8859-14 character set encoded in octal, decimal, a...
- iso_8859_15 (7)
- ISO 8859-15 character set encoded in octal, decimal, a...
- iso_8859_16 (7)
- ISO 8859-16 character set encoded in octal, decimal, a...
- iso_8859_2 (7)
- ISO 8859-2 character set encoded in octal, decimal, an...
- iso_8859_3 (7)
- ISO 8859-3 character set encoded in octal, decimal, an...
- iso_8859_4 (7)
- ISO 8859-4 character set encoded in octal, decimal, an...
- iso_8859_5 (7)
- ISO 8859-5 character set encoded in octal, decimal, an...
- iso_8859_6 (7)
- ISO 8859-6 character set encoded in octal, decimal, an...
- iso_8859_7 (7)
- ISO 8859-7 character set encoded in octal, decimal, an...
- iso_8859_8 (7)
- ISO 8859-8 character set encoded in octal, decimal, an...
- iso_8859_9 (7)
- ISO 8859-9 character set encoded in octal, decimal, an...
- isosize (8)
- output the length of an iso9660 filesystem
- ispell (1)
- Interactive spelling checking
- isprint (3)
- character classification functions
- isprint (3p)
- test for a printable character
- isprint_l (3)
- character classification functions
- ispunct (3)
- character classification functions
- ispunct (3p)
- test for a punctuation character
- ispunct_l (3)
- character classification functions
- isspace (3p)
- test for a white-space character
- isspace_l (3)
- character classification functions
- isunordered (3)
- floating-point relational tests without exception for NaN
- isupper (3)
- character classification functions
- isupper_l (3)
- character classification functions
- iswalnum (3)
- test for alphanumeric wide character
- iswalnum (3p)
- test for an alphanumeric wide-character code
- iswalpha (3)
- test for alphabetic wide character
- iswalpha (3p)
- test for an alphabetic wide-character code
- iswblank (3)
- test for whitespace wide character
- iswblank (3p)
- test for a blank wide-character code
- iswcntrl (3)
- test for control wide character
- iswcntrl (3p)
- test for a control wide-character code
- iswctype (3)
- wide-character classification
- iswctype (3p)
- test character for a specified class
- iswdigit (3)
- test for decimal digit wide character
- iswdigit (3p)
- test for a decimal digit wide-character code
- iswgraph (3)
- test for graphic wide character
- iswgraph (3p)
- test for a visible wide-character code
- iswlower (3)
- test for lowercase wide character
- iswlower (3p)
- test for a lowercase letter wide-character code
- iswprint (3)
- test for printing wide character
- iswprint (3p)
- test for a printable wide-character code
- iswpunct (3)
- test for punctuation or symbolic wide character
- iswpunct (3p)
- test for a punctuation wide-character code
- iswspace (3)
- test for whitespace wide character
- iswspace (3p)
- test for a white-space wide-character code
- iswupper (3)
- test for uppercase wide character
- iswupper (3p)
- test for an uppercase letter wide-character code
- iswxdigit (3)
- test for hexadecimal digit wide character
- iswxdigit (3p)
- test for a hexadecimal digit wide-character code
- isxdigit (3)
- character classification functions
- isxdigit (3p)
- test for a hexadecimal digit
- isxdigit_l (3)
- character classification functions
- itcldelegate (n)
- delegate methods, procs or options to other objects
- scope (n)
- capture the namespace context for a variable
- item_init (3menu)
- set hooks for automatic invocation by applications
- item_term (3menu)
- set hooks for automatic invocation by applications
- item_userptr (3menu)
- associate application data with a menu item
- item_visible (3menu)
- check visibility of a menu item
- j0 (3)
- Bessel functions of the first kind
- j0 (3p)
- Bessel functions of the first kind
- j0f (3)
- Bessel functions of the first kind
- j0l (3)
- Bessel functions of the first kind
- j1 (3)
- Bessel functions of the first kind
- j1f (3)
- Bessel functions of the first kind
- j1l (3)
- Bessel functions of the first kind
- jade (1)
- apply a DSSSL stylesheet to an SGML or XML document
- jail.conf (5)
- configuration for the fail2ban server
- jar (1)
- Manipulates Java Archive (JAR) files.
- jar-java-1.8.0-openjdk (1)
- Manipulates Java Archive (JAR) files.
- jarsigner (1)
- Signs and verifies Java Archive (JAR) files.
- jarsigner-java-1.7.0-openjdk (1)
- Signs and verifies Java Archive (JAR) files.
- jarsigner-java-1.8.0-openjdk (1)
- Signs and verifies Java Archive (JAR) files.
- java (1)
- Launches a Java application.
- java-java-1.7.0-openjdk (1)
- the Java application launcher
- java-java-1.8.0-openjdk (1)
- Launches a Java application.
- javadoc (1)
- Generates HTML pages of API documentation from Java so...
- javadoc-java-1.7.0-openjdk (1)
- The Java API Documentation Generator
- javadoc-java-1.8.0-openjdk (1)
- Generates HTML pages of API documentation fr...
- javah (1)
- Generates C header and source files from a Java class.
- javah-java-1.7.0-openjdk (1)
- C Header and Stub File Generator
- javah-java-1.8.0-openjdk (1)
- Generates C header and source files from a Jav...
- javap-java-1.7.0-openjdk (1)
- The Java Class File Disassembler
- javascript (n)
- Procedures to generate HTML and Java Script structures.
- jconsole (1)
- Starts a graphical console that lets you monitor and m...
- jconsole-java-1.8.0-openjdk (1)
- Starts a graphical console that lets you mo...
- jdb-java-1.7.0-openjdk (1)
- The Java Debugger
- jhat (1)
- Analyzes the Java heap. This command is experimental a...
- jhat-java-1.7.0-openjdk (1)
- Java Heap Analysis Tool
- jhat-java-1.8.0-openjdk (1)
- Analyzes the Java heap. This command is experim...
- JHSD (3)
- (unknown subject)
- JHSFA (3)
- (unknown subject)
- JHSG (3)
- (unknown subject)
- JHSI (3)
- (unknown subject)
- jinfo (1)
- Generates configuration information. This command is e...
- jinfo-java-1.8.0-openjdk (1)
- Generates configuration information. This comm...
- jjs-java-1.8.0-openjdk (1)
- Invokes the Nashorn engine.
- jmap (1)
- Prints shared object memory maps or heap memory detail...
- jmap-java-1.8.0-openjdk (1)
- Prints shared object memory maps or heap memory...
- jn (3)
- Bessel functions of the first kind
- jnf (3)
- Bessel functions of the first kind
- jng (5)
- JPEG Network Graphics (JNG) sub-format
- jnl (3)
- Bessel functions of the first kind
- jobs (1p)
- display status of jobs in the current session
- join (n)
- Create a string by joining together list elements
- journal_abort (9)
- Shutdown the journal immediately.
- journal_check_available_features (9)
- Check feature set in journalling layer
- journal_check_used_features (9)
- Check if features specified are used.
- journal_clear_err (9)
- clears the journal's error state
- journal_create (9)
- Initialise the new journal file
- journal_dirty_data (9)
- mark a buffer as containing dirty data to be flushed
- journal_errno (9)
- returns the journal's error state.
- journal_flush (9)
- Flush journal
- journal_get_create_access (9)
- notify intent to use newly created bh
- journal_get_undo_access (9)
- Notify intent to modify metadata with non-rewin...
- journal_init_inode (9)
- creates a journal which maps to a inode.
- journal_lock_updates (9)
- establish a transaction barrier.
- journal_restart (9)
- restart a handle.
- journal_set_features (9)
- Mark a given journal feature in the superblock
- journal_start (9)
- Obtain a new handle.
- journalctl (1)
- Query the systemd journal
- jpeg2yuv (1)
- Convert jpeg images to the yuv format.
- jps (1)
- Lists the instrumented Java Virtual Machines (JVMs) on...
- jps-java-1.7.0-openjdk (1)
- Java Virtual Machine Process Status Tool
- jps-java-1.8.0-openjdk (1)
- Lists the instrumented Java Virtual Machines (JV...
- jrunscript (1)
- Runs a command-line script shell that supports interac...
- jrunscript-java-1.7.0-openjdk (1)
- command line script shell
- jrunscript-java-1.8.0-openjdk (1)
- Runs a command-line script shell that sup...
- jsadebugd (1)
- Attaches to a Java process or core file and acts as a ...
- jsadebugd-java-1.8.0-openjdk (1)
- Attaches to a Java process or core file an...
- jstack (1)
- Prints Java thread stack traces for a Java process, co...
- jstack-java-1.8.0-openjdk (1)
- Prints Java thread stack traces for a Java pr...
- jstat (1)
- Monitors Java Virtual Machine (JVM) statistics. This c...
- jstat-java-1.7.0-openjdk (1)
- Java Virtual Machine Statistics Monitoring Tool
- jstat-java-1.8.0-openjdk (1)
- Monitors Java Virtual Machine (JVM) statistics...
- jstatd (1)
- Monitors Java Virtual Machines (JVMs) and enables remo...
- jstatd-java-1.7.0-openjdk (1)
- Virtual Machine jstat Daemon
- jstatd-java-1.8.0-openjdk (1)
- Monitors Java Virtual Machines (JVMs) and ena...
- JudyHS (3)
- (unknown subject)
- JudyHS_funcs (3)
- (unknown subject)
- JudyHSDel (3)
- (unknown subject)
- JudyHSFreeArray (3)
- (unknown subject)
- JudyHSGet (3)
- (unknown subject)
- JudyHSIns (3)
- (unknown subject)
- jv-convert-4.9 (1)
- Convert file from one encoding to another
- k5login (5)
- Kerberos V5 acl file for host access
- k5srvutil (1)
- host key table (keytab) manipulation utility
- kaleidocycle (6x)
- draws twistable rings of tetrahedra
- kbd_mode (1)
- report or set the keyboard mode
- kbdrate (8)
- reset the keyboard repeat rate and delay time
- kbookmarkmerger (1)
- A program for merging a given set of bookmarks into th...
- kbuildsycoca4 (8)
- Rebuilds the system configuration cache.
- kbuildsycoca5 (8)
- Rebuilds the KService desktop file system configuratio...
- kcalloc (9)
- allocate memory for an array. The memory is set to zero.
- kcmp (2)
- compare two processes to determine if they share a ker...
- kcookiejar4 (8)
- KDE HTTP cookie daemon
- kde4-config (1)
- Prints KDE installation paths
- kded4 (8)
- KDE daemon - triggers Sycoca database updates when nee...
- kded5 (8)
- KDE daemon - triggers Sycoca database updates when nee...
- kdeinit4 (8)
- KDE process launcher.
- kdesu (1)
- Runs a program with elevated privileges
- kdesu-4 (1)
- Runs a program with elevated privileges
- kdump (8)
- This is just a placeholder until real man page has bee...
- key.dns_resolver (8)
- Upcall for request-key to handle dns_resolver keys
- key_defined (3ncurses)
- check if a keycode is defined
- keyctl (2)
- manipulate the kernel's key management facility
- keyctl_assume_authority (3)
- Assume the authority to instantiate a key
- keyctl_chown (3)
- Change the ownership of a key
- keyctl_get_keyring_ID (3)
- Get the ID of a special keyring
- keyctl_get_persistent (3)
- Get the persistent keyring for a user
- keyctl_reject (3)
- Negatively instantiate a key specifying search error
- keyctl_search (3)
- Search a keyring for a key
- keyctl_session_to_parent (3)
- Set the parent process's session keyring
- keyctl_set_reqkey_keyring (3)
- Set the implicit destination keyring
- keyctl_set_timeout (3)
- Set the expiration timer on a key
- keyctl_setperm (3)
- Change the permissions mask on a key
- keygen (1)
- generate magic cookies for xauth
- urxvt-keysym-list-256color (1)
- implement the "list" keysym expansion.
- keytool (1)
- Manages a keystore (database) of cryptographic keys, X...
- keytool-java-1.8.0-openjdk (1)
- Manages a keystore (database) of cryptograph...
- kfifo_avail (9)
- returns the number of unused elements in the fifo
- kfifo_dma_in_finish (9)
- finish a DMA IN operation
- kfifo_dma_out_finish (9)
- finish a DMA OUT operation
- kfifo_esize (9)
- returns the size of the element managed by the fifo
- kfifo_free (9)
- frees the fifo
- kfifo_from_user (9)
- puts some data from user space into the fifo
- kfifo_get (9)
- get data from the fifo
- kfifo_in (9)
- put data into the fifo
- kfifo_in_spinlocked (9)
- put data into the fifo using a spinlock for locking
- kfifo_initialized (9)
- Check if the fifo is initialized
- kfifo_is_empty (9)
- returns true if the fifo is empty
- kfifo_is_full (9)
- returns true if the fifo is full
- kfifo_len (9)
- returns the number of used elements in the fifo
- kfifo_out (9)
- get data from the fifo
- kfifo_out_peek (9)
- gets some data from the fifo
- kfifo_out_spinlocked (9)
- get data from the fifo using a spinlock for locking
- kfifo_peek (9)
- get data from the fifo without removing
- kfifo_peek_len (9)
- gets the size of the next fifo record
- kfifo_put (9)
- put data into the fifo
- kfifo_recsize (9)
- returns the size of the record length field
- kfifo_reset (9)
- removes the entire fifo content
- kfifo_size (9)
- returns the size of the fifo in elements
- kfifo_to_user (9)
- copies data from the fifo into user space
- kgdb_arch_exit (9)
- Perform any architecture specific uninitalization.
- kgdb_arch_handle_exception (9)
- Handle architecture specific GDB packets.
- kgdb_arch_init (9)
- Perform any architecture specific initalization.
- kgdb_arch_late (9)
- Perform any architecture specific initalization.
- kgdb_arch_set_pc (9)
- Generic call back to the program counter
- kgdb_roundup_cpus (9)
- Get other CPUs into a holding pattern
- kgdb_skipexception (9)
- (optional) exit kgdb_handle_exception early
- kibitz (1)
- allow two people to interact with one shell
- KickStart (9)
- Perform hard reset of MPT adapter.
- Proc::Killall (3)
- Kill all instances of a process by pattern matching th...
- killchar (3ncurses)
- curses environment query routines
- killchar_sp (3ncurses)
- curses screen-pointer extension
- killwchar (3ncurses)
- curses environment query routines
- kinit (1)
- obtain and cache Kerberos ticket-granting ticket
- KIWI::config.sh (1)
- Configuration File for KIWI image description
- KIWI::images.sh (1)
- Configuration File for KIWI image description
- KIWI::kiwirc (1)
- Resource file for the Kiwi imaging system
- klist (1)
- list cached Kerberos tickets
- klogconsole (8)
- Tells the kernel to what terminal it should copy messages
- kmem_cache_alloc (9)
- Allocate an object
- kmem_cache_alloc_node (9)
- Allocate an object on the specified node
- kmem_cache_free (9)
- Deallocate an object
- kmsg_dump_rewind (9)
- reset the interator
- kobject_add (9)
- the main kobject add function
- kobject_del (9)
- unlink kobject from hierarchy.
- kobject_get_path (9)
- generate and return the path associated with a given k...
- kobject_init_and_add (9)
- initialize a kobject structure and add it to the k...
- kobject_rename (9)
- change the name of an object
- kobject_set_name (9)
- Set the name of a kobject
- koi8-r (7)
- Russian character set encoded in octal, decimal, and h...
- koi8-u (7)
- Ukrainian character set encoded in octal, decimal, and...
- kpasswd (1)
- change a user's Kerberos password
- kproplog (8)
- display the contents of the Kerberos principal update log
- kpseaccess (1)
- determine whether a file can be accessed
- kpsepath (1)
- script to make teTeX-style kpsetool, kpsexpand, and kp...
- kpsewhere (1)
- Expanding kpsewhich to separately iterate over each te...
- kpsewhich (1)
- standalone path lookup and and expansion for kpathsea
- krealloc (9)
- reallocate memory. The contents will remain unchanged.
- ksh (1ast)
- shell, the standard/restricted command and programming...
- ksh93 (1ast)
- shell, the standard/restricted command and programming...
- ksize (9)
- get the actual amount of memory allocated for a given ...
- ksshaskpass (1)
- prompts a user for a passphrase using KDE
- kswitch (1)
- switch primary ticket cache
- kthread_bind (9)
- bind a just-created kthread to a cpu.
- kthread_create_on_node (9)
- create a kthread.
- kthread_freezable_should_stop (9)
- should this freezable kthread return now?
- kthread_run (9)
- create and wake a thread.
- kthread_should_stop (9)
- should this kthread return now?
- kthread_stop (9)
- stop a thread created by kthread_create.
- kthread_worker_fn (9)
- kthread function to process kthread_worker
- ktime_after (9)
- Compare if a ktime_t value is bigger than another one.
- ktime_before (9)
- Compare if a ktime_t value is smaller than another one.
- ktime_equal (9)
- Compares two ktime_t variables to see if they are equal
- urxvt-kuake-256color (1)
- kuake-like hotkey terminal
- kumppa (6x)
- spiraling, spinning, splashes of color rush toward the...
- kzalloc (9)
- allocate memory. The memory is set to zero.
- l2ping (1)
- Send L2CAP echo request and receive answer
- labs (3)
- compute the absolute value of an integer
- lacheck (1)
- A consistency checker for LaTeX documents.
- lament (6x)
- animates the Lament Configuration
- lan_reply (9)
- Handle all data sent from the hardware.
- langinfo.h (0p)
- language information constants
- last (1)
- show listing of last logged in users
- lastb (1)
- show listing of last logged in users
- lastlog (8)
- reports the most recent login of all users or of a giv...
- latex2html (1)
- translate LaTeX files to HTML (HyperText Markup Language)
- latexdiff-vc (1)
- wrapper script that calls latexdiff for different vers...
- latin1 (7)
- ISO 8859-1 character set encoded in octal, decimal, an...
- latin10 (7)
- ISO 8859-16 character set encoded in octal, decimal, a...
- latin2 (7)
- ISO 8859-2 character set encoded in octal, decimal, an...
- latin3 (7)
- ISO 8859-3 character set encoded in octal, decimal, an...
- latin4 (7)
- ISO 8859-4 character set encoded in octal, decimal, an...
- latin5 (7)
- ISO 8859-9 character set encoded in octal, decimal, an...
- latin6 (7)
- ISO 8859-10 character set encoded in octal, decimal, a...
- latin7 (7)
- ISO 8859-13 character set encoded in octal, decimal, a...
- latin8 (7)
- ISO 8859-14 character set encoded in octal, decimal, a...
- latin9 (7)
- ISO 8859-15 character set encoded in octal, decimal, a...
- lav2wav (1)
- Extract the audio out of MJPEG container files to stdout
- lavtrans (1)
- Convert MJPEG videos to other MJPEG video formats
- lbxproxy (1)
- Low BandWidth X proxy
- lchown (2)
- change ownership of a file
- lchown (3p)
- change the owner and group of a symbolic link
- lchown32 (2)
- change ownership of a file
- lckpwdf (3)
- get shadow password file entry
- ld (1)
- The GNU linker
- ld_errno (3)
- LDAP protocol error handling routines
- ldap (3)
- OpenLDAP Lightweight Directory Access Protocol API
- ldap_attributetype2name (3)
- Schema definition handling routines
- ldap_attributetype2str (3)
- Schema definition handling routines
- ldap_attributetype_free (3)
- Schema definition handling routines
- ldap_count_messages (3)
- Stepping through messages in a result chain
- ldap_count_references (3)
- Stepping through continuation references in a res...
- ldap_count_values (3)
- LDAP attribute value handling routines
- ldap_count_values_len (3)
- LDAP attribute value handling routines
- ldap_dcedn2dn (3)
- LDAP DN handling routines
- ldap_destroy (3)
- Duplicate and destroy LDAP session handles
- ldap_dn2ad_canonical (3)
- LDAP DN handling routines
- ldap_dn2dcedn (3)
- LDAP DN handling routines
- ldap_dn2str (3)
- LDAP DN handling routines
- ldap_dn2ufn (3)
- LDAP DN handling routines
- ldap_dnfree (3)
- LDAP DN handling routines
- ldap_dup (3)
- Duplicate and destroy LDAP session handles
- ldap_err2string (3)
- LDAP protocol error handling routines
- ldap_errlist (3)
- LDAP protocol error handling routines
- ldap_error (3)
- LDAP protocol error handling routines
- ldap_explode_dn (3)
- LDAP DN handling routines
- ldap_explode_rdn (3)
- LDAP DN handling routines
- ldap_extended_operation (3)
- Extends the LDAP operations to the LDAP server.
- ldap_extended_operation_s (3)
- Extends the LDAP operations to the LDAP server.
- ldap_first_attribute (3)
- step through LDAP entry attributes
- ldap_first_message (3)
- Stepping through messages in a result chain
- ldap_first_reference (3)
- Stepping through continuation references in a resu...
- ldap_get_dn (3)
- LDAP DN handling routines
- ldap_get_option (3)
- LDAP option handling routines
- ldap_get_values (3)
- LDAP attribute value handling routines
- ldap_get_values_len (3)
- LDAP attribute value handling routines
- ldap_init (3)
- Initialize the LDAP library and open a connection to a...
- ldap_init_fd (3)
- Initialize the LDAP library and open a connection to a...
- ldap_initialize (3)
- Initialize the LDAP library and open a connection to a...
- ldap_matchingrule2name (3)
- Schema definition handling routines
- ldap_matchingrule2str (3)
- Schema definition handling routines
- ldap_matchingrule_free (3)
- Schema definition handling routines
- ldap_msgfree (3)
- Wait for the result of an LDAP operation
- ldap_msgid (3)
- Wait for the result of an LDAP operation
- ldap_msgtype (3)
- Wait for the result of an LDAP operation
- ldap_next_attribute (3)
- step through LDAP entry attributes
- ldap_next_message (3)
- Stepping through messages in a result chain
- ldap_next_reference (3)
- Stepping through continuation references in a resul...
- ldap_objectclass2name (3)
- Schema definition handling routines
- ldap_objectclass2str (3)
- Schema definition handling routines
- ldap_objectclass_free (3)
- Schema definition handling routines
- ldap_open (3)
- Initialize the LDAP library and open a connection to a...
- ldap_parse_sort_control (3)
- Decode the information returned from a search o...
- ldap_parse_vlv_control (3)
- Decode the information returned from a search op...
- ldap_perror (3)
- LDAP protocol error handling routines
- ldap_rename (3)
- Renames the specified entry.
- ldap_rename_s (3)
- Renames the specified entry.
- ldap_result (3)
- Wait for the result of an LDAP operation
- ldap_result2error (3)
- LDAP protocol error handling routines
- ldap_schema (3)
- Schema definition handling routines
- ldap_scherr2str (3)
- Schema definition handling routines
- ldap_search (3)
- Perform an LDAP search operation
- ldap_search_ext (3)
- Perform an LDAP search operation
- ldap_search_ext_s (3)
- Perform an LDAP search operation
- ldap_search_s (3)
- Perform an LDAP search operation
- ldap_search_st (3)
- Perform an LDAP search operation
- ldap_set_option (3)
- LDAP option handling routines
- ldap_set_urllist_proc (3)
- Initialize the LDAP library and open a connection...
- ldap_str2attributetype (3)
- Schema definition handling routines
- ldap_str2dn (3)
- LDAP DN handling routines
- ldap_str2matchingrule (3)
- Schema definition handling routines
- ldap_str2objectclass (3)
- Schema definition handling routines
- ldap_str2syntax (3)
- Schema definition handling routines
- ldap_syntax2name (3)
- Schema definition handling routines
- ldap_syntax2str (3)
- Schema definition handling routines
- ldap_syntax_free (3)
- Schema definition handling routines
- ldap_value_free (3)
- LDAP attribute value handling routines
- ldap_value_free_len (3)
- LDAP attribute value handling routines
- ldappasswd (1)
- change the password of an LDAP entry
- ldapsearch (1)
- LDAP search tool
- ldapwhoami (1)
- LDAP who am i? tool
- ldattach (8)
- attach a line discipline to a serial line
- ldb (3)
- A light-weight database library
- ldbsearch (1)
- Search for records in a LDB database
- ldd (1)
- print shared library dependencies
- ldif (5)
- LDAP Data Interchange Format
- le16toh (3)
- convert values between host and big-/little-endian byt...
- le32toh (3)
- convert values between host and big-/little-endian byt...
- le64toh (3)
- convert values between host and big-/little-endian byt...
- lease_get_mtime (9)
- get the last modified time of an inode
- lefty (1)
- A Programmable Graphics Editor
- less (3)
- perl pragma to request less of something
- lessecho (1)
- expand metacharacters
- lev_comp (6)
- NetHack special levels compiler
- lex (1)
- the fast lexical analyser generator
- lexgrog (1)
- parse header information in man pages
- lfind (3)
- linear search of an array
- lfind (3p)
- find entry in a linear search table
- lh_TYPE_delete (3osslssl-3)
- dynamic hash table
- lh_TYPE_doall (3osslssl-3)
- dynamic hash table
- lh_TYPE_doall_arg (3osslssl-3)
- dynamic hash table
- lh_TYPE_error (3osslssl-3)
- dynamic hash table
- lh_TYPE_flush (3osslssl-3)
- dynamic hash table
- lh_TYPE_free (3osslssl-3)
- dynamic hash table
- lh_TYPE_get_down_load (3osslssl-3)
- dynamic hash table
- lh_TYPE_insert (3osslssl-3)
- dynamic hash table
- lh_TYPE_new (3osslssl-3)
- dynamic hash table
- lh_TYPE_num_items (3osslssl-3)
- dynamic hash table
- lh_TYPE_retrieve (3osslssl-3)
- dynamic hash table
- lh_TYPE_set_down_load (3osslssl-3)
- dynamic hash table
- lha (1)
- compression tool for .lzh archive files.
- LHASH (3osslssl-3)
- dynamic hash table
- LHASH_DOALL_ARG_FN_TYPE (3osslssl-3)
- dynamic hash table
- libarchive (3)
- functions for reading and writing streaming archives
- libarchive-formats (5)
- archive formats supported by the libarchive library
- libarchive_changes (3)
- changes in libarchive interface
- libarchive_internals (3)
- description of libarchive internal interfaces
- libauth (3)
- routines for writing nnrpd resolvers and authenticators
- libcurl-multi (3)
- how to use the multi interface
- libcurl-security (3)
- security considerations when using libcurl
- libcurl-share (3)
- how to use the share interface
- libcurl-thread (3)
- libcurl thread safety
- libexpect (3)
- programmed dialogue library with interactive programs
- libgen.h (0p)
- definitions for pattern matching functions
- libgphoto2 (3)
- cross-platform digital camera library
- libgphoto2_port (3)
- cross-platform port access library
- libinput (1)
- tool to interface with libinput
- libinput-debug-events (1)
- debug helper for libinput
- libinput-debug-gui (1)
- visual debug helper for libinput
- libinput-measure-touch-size (1)
- measure touch size and orientation of devices
- libinput-measure-touchpad-pressure (1)
- measure pressure properties of devices
- libinput-measure-touchpad-tap (1)
- measure tap-to-click properties of devices
- libinput-measure-trackpoint-range (1)
- measure the delta range of a trackpoint
- libmaxminddb (3)
- a library for working with MaxMind DB files
- libmng (3)
- Multiple-image Network Graphics (MNG) Reference Librar...
- libnetpbm (3)
- general introduction to the netpbm library
- osip (1)
- The GNU oSIP library is a low layer SIP implementation.
- libpng (3)
- Portable Network Graphics (PNG) Reference Library 1.2.50
- libpngpf (3)
- Portable Network Graphics (PNG) Reference Library 1.2....
- libquvi-scripts (7)
- Overview of the library scripts
- libsensors (3)
- publicly accessible functions provided by the sensors ...
- libsmbclient (7)
- An extension library for browsers and that can be used...
- libsolv-bindings (3)
- access libsolv from perl/python/ruby
- libsolv-history (3)
- how the libsolv library came into existence
- libssh2_agent_connect (3)
- connect to an ssh-agent
- libssh2_agent_disconnect (3)
- close a connection to an ssh-agent
- libssh2_agent_free (3)
- free an ssh-agent handle
- libssh2_agent_get_identity (3)
- get a public key off the collection of publi...
- libssh2_agent_get_identity_path (3)
- gets the custom ssh-agent socket path
- libssh2_agent_init (3)
- init an ssh-agent handle
- libssh2_agent_list_identities (3)
- request an ssh-agent to list of public keys.
- libssh2_agent_set_identity_path (3)
- set an ssh-agent socket path on disk
- libssh2_agent_sign (3)
- sign data, with the help of ssh-agent
- libssh2_agent_userauth (3)
- authenticate a session with a public key, with t...
- libssh2_banner_set (3)
- set the SSH protocol banner for the local client
- libssh2_base64_decode (3)
- decode a base64 encoded string
- libssh2_channel_close (3)
- close a channel
- libssh2_channel_direct_streamlocal_ex (3)
- Tunnel a UNIX socket connection t...
- libssh2_channel_direct_tcpip (3)
- convenience macro for libssh2_channel_dire...
- libssh2_channel_direct_tcpip_ex (3)
- Tunnel a TCP connection through an SSH ...
- libssh2_channel_eof (3)
- check a channel's EOF status
- libssh2_channel_exec (3)
- convenience macro for libssh2_channel_process_star...
- libssh2_channel_flush (3)
- convenience macro for libssh2_channel_flush_ex(3)...
- libssh2_channel_flush_ex (3)
- flush a channel
- libssh2_channel_flush_stderr (3)
- convenience macro for libssh2_channel_flus...
- libssh2_channel_forward_accept (3)
- accept a queued connection
- libssh2_channel_forward_cancel (3)
- cancel a forwarded TCP port
- libssh2_channel_forward_listen (3)
- convenience macro for libssh2_channel_fo...
- libssh2_channel_forward_listen_ex (3)
- listen to inbound connections
- libssh2_channel_free (3)
- free all resources associated with a channel
- libssh2_channel_get_exit_signal (3)
- get the remote exit signal
- libssh2_channel_get_exit_status (3)
- get the remote exit code
- libssh2_channel_handle_extended_data (3)
- set extended data handling mode
- libssh2_channel_handle_extended_data2 (3)
- set extended data handling mode
- libssh2_channel_ignore_extended_data (3)
- convenience macro for libssh2_chan...
- libssh2_channel_open_ex (3)
- establish a generic session channel
- libssh2_channel_open_session (3)
- convenience macro for libssh2_channel_open...
- libssh2_channel_process_startup (3)
- request a shell on a channel
- libssh2_channel_read (3)
- convenience macro for libssh2_channel_read_ex(3) c...
- libssh2_channel_read_ex (3)
- read data from a channel stream
- libssh2_channel_read_stderr (3)
- convenience macro for libssh2_channel_read_...
- libssh2_channel_receive_window_adjust (3)
- adjust the channel window
- libssh2_channel_receive_window_adjust2 (3)
- adjust the channel window
- libssh2_channel_request_auth_agent (3)
- request agent forwarding for a session
- libssh2_channel_request_pty (3)
- convenience macro for libssh2_channel_reque...
- libssh2_channel_request_pty_ex (3)
- short function description
- libssh2_channel_request_pty_size (3)
- convenience macro for libssh2_channel_...
- libssh2_channel_request_pty_size_ex (3)
- TODO
- libssh2_channel_send_eof (3)
- send EOF to remote server
- libssh2_channel_set_blocking (3)
- set or clear blocking mode on channel
- libssh2_channel_setenv (3)
- convenience macro for libssh2_channel_setenv_ex(...
- libssh2_channel_setenv_ex (3)
- set an environment variable on the channel
- libssh2_channel_shell (3)
- convenience macro for libssh2_channel_process_sta...
- libssh2_channel_signal_ex (3)
- Send a signal to process previously opened on...
- libssh2_channel_subsystem (3)
- convenience macro for libssh2_channel_process...
- libssh2_channel_wait_closed (3)
- wait for the remote to close the channel
- libssh2_channel_wait_eof (3)
- wait for the remote to reply to an EOF request
- libssh2_channel_window_read (3)
- convenience macro for libssh2_channel_windo...
- libssh2_channel_window_read_ex (3)
- Check the status of the read window
- libssh2_channel_window_write (3)
- convenience macro for libssh2_channel_wind...
- libssh2_channel_window_write_ex (3)
- Check the status of the write window
- libssh2_channel_write (3)
- convenience macro for libssh2_channel_write_ex(3)
- libssh2_channel_write_ex (3)
- write data to a channel stream blocking
- libssh2_channel_write_stderr (3)
- convenience macro for libssh2_channel_writ...
- libssh2_channel_x11_req (3)
- convenience macro for libssh2_channel_x11_req_e...
- libssh2_channel_x11_req_ex (3)
- request an X11 forwarding channel
- libssh2_crypto_engine (3)
- retrieve used crypto engine
- libssh2_exit (3)
- global library deinitialization
- libssh2_free (3)
- deallocate libssh2 memory
- libssh2_hostkey_hash (3)
- return a hash of the remote host's key
- libssh2_init (3)
- global library initialization
- libssh2_keepalive_config (3)
- short function description
- libssh2_keepalive_send (3)
- short function description
- libssh2_knownhost_add (3)
- add a known host
- libssh2_knownhost_addc (3)
- add a known host
- libssh2_knownhost_check (3)
- check a host+key against the list of known hosts
- libssh2_knownhost_checkp (3)
- check a host+key against the list of known hosts
- libssh2_knownhost_del (3)
- delete a known host entry
- libssh2_knownhost_free (3)
- free a collection of known hosts
- libssh2_knownhost_get (3)
- get a known host off the collection of known hosts
- libssh2_knownhost_init (3)
- init a collection of known hosts
- libssh2_knownhost_readfile (3)
- parse a file of known hosts
- libssh2_knownhost_readline (3)
- read a known host line
- libssh2_knownhost_writefile (3)
- write a collection of known hosts to a file
- libssh2_knownhost_writeline (3)
- convert a known host to a line for storage
- libssh2_poll (3)
- poll for activity on a socket, channel or listener
- libssh2_poll_channel_read (3)
- check if data is available
- libssh2_publickey_add (3)
- convenience macro for libssh2_publickey_add_ex(3)...
- libssh2_publickey_add_ex (3)
- Add a public key entry
- libssh2_publickey_init (3)
- TODO
- libssh2_publickey_list_fetch (3)
- TODO
- libssh2_publickey_list_free (3)
- TODO
- libssh2_publickey_remove_ex (3)
- TODO
- libssh2_publickey_remove (3)
- convenience macro for libssh2_publickey_remove...
- libssh2_publickey_shutdown (3)
- TODO
- libssh2_scp_recv (3)
- request a remote file via SCP
- libssh2_scp_recv2 (3)
- request a remote file via SCP
- libssh2_scp_send (3)
- convenience macro for libssh2_scp_send_ex(3) calls
- libssh2_scp_send64 (3)
- Send a file via SCP
- libssh2_scp_send_ex (3)
- Send a file via SCP
- libssh2_session_abstract (3)
- return a pointer to a session's abstract pointer
- libssh2_session_banner_get (3)
- get the remote banner
- libssh2_session_banner_set (3)
- set the SSH protocol banner for the local cl...
- libssh2_session_block_directions (3)
- get directions to wait for
- libssh2_session_callback_set (3)
- set a callback function
- libssh2_session_disconnect (3)
- convenience macro for libssh2_session_discon...
- libssh2_session_disconnect_ex (3)
- terminate transport layer
- libssh2_session_flag (3)
- TODO
- libssh2_session_free (3)
- frees resources associated with a session instance
- libssh2_session_get_blocking (3)
- TODO
- libssh2_session_get_read_timeout (3)
- get the timeout for packet read functions
- libssh2_session_get_timeout (3)
- get the timeout for blocking functions
- libssh2_session_handshake (3)
- perform the SSH handshake
- libssh2_session_hostkey (3)
- get the remote key
- libssh2_session_init (3)
- convenience macro for libssh2_session_init_ex(3) c...
- libssh2_session_init_ex (3)
- initializes an SSH session object
- libssh2_session_last_errno (3)
- get the most recent error number
- libssh2_session_last_error (3)
- get the most recent error
- libssh2_session_method_pref (3)
- set preferred key exchange method
- libssh2_session_methods (3)
- return the currently active algorithms
- libssh2_session_set_blocking (3)
- set or clear blocking mode on session
- libssh2_session_set_last_error (3)
- sets the internal error state
- libssh2_session_set_read_timeout (3)
- set timeout for packet read functions
- libssh2_session_set_timeout (3)
- set timeout for blocking functions
- libssh2_session_startup (3)
- begin transport layer
- libssh2_session_supported_algs (3)
- get list of supported algorithms
- libssh2_sftp_close (3)
- convenience macro for libssh2_sftp_close_handle(3) c...
- libssh2_sftp_close_handle (3)
- close filehandle
- libssh2_sftp_closedir (3)
- convenience macro for libssh2_sftp_close_handle(3...
- libssh2_sftp_fsetstat (3)
- convenience macro for libssh2_sftp_fstat_ex(3) calls
- libssh2_sftp_fstat (3)
- convenience macro for libssh2_sftp_fstat_ex(3) calls
- libssh2_sftp_fstat_ex (3)
- get or set attributes on an SFTP file handle
- libssh2_sftp_fstatvfs (3)
- get file system statistics
- libssh2_sftp_fsync (3)
- synchronize file to disk
- libssh2_sftp_get_channel (3)
- return the channel of sftp
- libssh2_sftp_init (3)
- open SFTP channel for the given SSH session.
- libssh2_sftp_last_error (3)
- return the last SFTP-specific error code
- libssh2_sftp_lstat (3)
- convenience macro for libssh2_sftp_stat_ex(3) calls
- libssh2_sftp_mkdir (3)
- convenience macro for libssh2_sftp_mkdir_ex(3) calls
- libssh2_sftp_mkdir_ex (3)
- create a directory on the remote file system
- libssh2_sftp_open (3)
- convenience macro for libssh2_sftp_open_ex(3) calls
- libssh2_sftp_open_ex (3)
- open filehandle for file on SFTP.
- libssh2_sftp_open_ex_r (3)
- open filehandle for file on SFTP.
- libssh2_sftp_open_r (3)
- convenience macro for libssh2_sftp_open_ex_r(3) calls
- libssh2_sftp_opendir (3)
- convenience macro for libssh2_sftp_open_ex(3) calls
- libssh2_sftp_read (3)
- read data from an SFTP handle
- libssh2_sftp_readdir (3)
- convenience macro for libssh2_sftp_readdir_ex(3) c...
- libssh2_sftp_readdir_ex (3)
- read directory data from an SFTP handle
- libssh2_sftp_readlink (3)
- convenience macro for libssh2_sftp_symlink_ex(3)
- libssh2_sftp_realpath (3)
- convenience macro for libssh2_sftp_symlink_ex(3)
- libssh2_sftp_rename (3)
- convenience macro for libssh2_sftp_rename_ex(3) calls
- libssh2_sftp_rename_ex (3)
- rename an SFTP file
- libssh2_sftp_rewind (3)
- convenience macro for libssh2_sftp_seek64(3) calls
- libssh2_sftp_rmdir (3)
- convenience macro for libssh2_sftp_rmdir_ex(3)
- libssh2_sftp_rmdir_ex (3)
- remove an SFTP directory
- libssh2_sftp_seek (3)
- set the read/write position indicator within a file
- libssh2_sftp_seek64 (3)
- set the read/write position within a file
- libssh2_sftp_setstat (3)
- convenience macro for libssh2_sftp_stat_ex(3) calls
- libssh2_sftp_shutdown (3)
- shut down an SFTP session
- libssh2_sftp_stat (3)
- convenience macro for libssh2_sftp_fstat_ex(3) calls
- libssh2_sftp_stat_ex (3)
- get status about an SFTP file
- libssh2_sftp_statvfs (3)
- get file system statistics
- libssh2_sftp_symlink (3)
- convenience macro for libssh2_sftp_symlink_ex(3)
- libssh2_sftp_symlink_ex (3)
- read or set a symbolic link
- libssh2_sftp_tell (3)
- get the current read/write position indicator for a file
- libssh2_sftp_tell64 (3)
- get the current read/write position indicator for a...
- libssh2_sftp_unlink (3)
- convenience macro for libssh2_sftp_unlink_ex(3) calls
- libssh2_sftp_unlink_ex (3)
- unlink an SFTP file
- libssh2_sftp_write (3)
- write SFTP data
- libssh2_sign_sk (3)
- Create a signature from a FIDO2 authenticator.
- libssh2_trace (3)
- enable debug info from inside libssh2
- libssh2_trace_sethandler (3)
- set a trace output handler
- libssh2_userauth_authenticated (3)
- return authentication status
- libssh2_userauth_banner (3)
- get the server's userauth banner message
- libssh2_userauth_hostbased_fromfile (3)
- convenience macro for libssh2_usera...
- libssh2_userauth_hostbased_fromfile_ex (3)
- TODO
- libssh2_userauth_keyboard_interactive (3)
- convenience macro for libssh2_use...
- libssh2_userauth_keyboard_interactive_ex (3)
- authenticate a session using k...
- libssh2_userauth_list (3)
- list supported authentication methods
- libssh2_userauth_password (3)
- convenience macro for libssh2_userauth_passwo...
- libssh2_userauth_password_ex (3)
- authenticate a session with username and p...
- libssh2_userauth_publickey (3)
- authenticate using a callback function
- libssh2_userauth_publickey_fromfile (3)
- convenience macro for libssh2_usera...
- libssh2_userauth_publickey_fromfile_ex (3)
- authenticate a session with a pu...
- libssh2_userauth_publickey_frommemory (3)
- authenticate a session with a pub...
- libssh2_userauth_publickey_sk (3)
- authenticate a session with a FIDO2 authe...
- libssh2_version (3)
- return the libssh2 version number
- libsystem (3)
- run a Netpbm program with program input and output
- libutempter (8)
- privileged helper program for utmp/wtmp updates
- libwww::lwpcook (3pm)
- The libwww-perl cookbook
- libzip (3)
- library for manipulating zip archives
- life_cycle-cipher (7osslssl-3)
- The cipher algorithm life-cycle
- life_cycle-digest (7osslssl-3)
- The digest algorithm life-cycle
- life_cycle-kdf (7osslssl-3)
- The KDF algorithm life-cycle
- life_cycle-mac (7osslssl-3)
- The MAC algorithm life-cycle
- life_cycle-pkey (7osslssl-3)
- The PKEY algorithm life-cycle
- life_cycle-rand (7osslssl-3)
- The RAND algorithm life-cycle
- lightdm (1)
- a display manager
- lightdm-set-defaults (1)
- sets configuration options for lightdm
- limits.conf (5)
- configuration file for the pam_limits module
- limits.h (0p)
- implementation-defined constants
- link (1)
- call the link function to create a link to a file
- link (3p)
- link one file to another file relative to two director...
- linux32 (8)
- change reported architecture in new program environmen...
- linux64 (8)
- change reported architecture in new program environmen...
- Linux::Pid (3pm)
- Get the native PID and the PPID on Linux
- lircd (8)
- LIRC daemon decodes infrared signals and provides them...
- lircrcd (1)
- daemon to handle consistent .lircrc state among client...
- lispmtopgm (1)
- convert a Lisp Machine bitmap file to PGM
- list_empty (9)
- tests whether a list is empty
- list_empty_careful (9)
- tests whether a list is empty and not being modified
- list_entry (9)
- get the struct for this entry
- list_first_entry (9)
- get the first element from a list
- list_first_entry_or_null (9)
- get the first element from a list
- list_for_each (9)
- iterate over a list
- list_for_each_entry (9)
- iterate over list of given type
- list_for_each_entry_continue (9)
- continue iteration over list of given type
- list_for_each_entry_continue_reverse (9)
- iterate backwards from the given p...
- list_for_each_entry_from (9)
- iterate over list of given type from the curre...
- list_for_each_entry_reverse (9)
- iterate backwards over list of given type.
- list_for_each_entry_safe (9)
- iterate over list of given type safe against r...
- list_for_each_entry_safe_continue (9)
- continue list iteration safe against ...
- list_for_each_entry_safe_from (9)
- iterate over list from current point safe...
- list_for_each_entry_safe_reverse (9)
- iterate backwards over list safe again...
- list_for_each_prev (9)
- iterate over a list backwards
- list_for_each_prev_safe (9)
- iterate over a list backwards safe against remo...
- list_for_each_safe (9)
- iterate over a list safe against removal of list entry
- LIST_FOREACH (3bsd)
- implementations of singly-linked lists, singly-linked ...
- LIST_FOREACH_FROM (3bsd)
- implementations of singly-linked lists, singly-lin...
- LIST_FOREACH_FROM_SAFE (3bsd)
- implementations of singly-linked lists, singl...
- LIST_FOREACH_SAFE (3bsd)
- implementations of singly-linked lists, singly-lin...
- LIST_HEAD_INITIALIZER (3bsd)
- implementations of singly-linked lists, singly...
- list_is_last (9)
- tests whether list is the last entry in list head
- list_is_singular (9)
- tests whether a list has just one entry.
- list_last_entry (9)
- get the last element from a list
- list_move (9)
- delete from one list and add as another's head
- list_move_tail (9)
- delete from one list and add as another's tail
- list_next_entry (9)
- get the next element in list
- list_prepare_entry (9)
- prepare a pos entry for use in list_for_each_entry_c...
- list_prev_entry (9)
- get the prev element in list
- list_rotate_left (9)
- rotate the list to the left
- list_safe_reset_next (9)
- reset a stale list_for_each_entry_safe loop
- list_splice (9)
- join two lists, this is designed for stacks
- list_splice_init (9)
- join two lists and reinitialise the emptied list.
- list_splice_tail (9)
- join two lists, each list being a queue
- list_splice_tail_init (9)
- join two lists and reinitialise the emptied list
- listen (3p)
- listen for socket connections and limit the queue of i...
- lj4_font (5)
- groff fonts for use with devlj4
- ljlatest (6x)
- prints the most recent public posts on livejournal.com.
- lkbib (1)
- search bibliographic databases
- llabs (3)
- compute the absolute value of an integer
- llength (n)
- Count the number of elements in a list
- llrint (3p)
- round to the nearest integer value using current round...
- lmhosts (5)
- The Samba NetBIOS hosts file
- lndir (1)
- create a shadow directory of symbolic links to another...
- lneato (1)
- A Customizable Graph Editor
- load (n)
- Load machine code and initialize new commands
- load_policy (8)
- load a new SELinux policy into the kernel
- loadunimap (8)
- load the kernel unicode-to-font mapping table
- local.users (5)
- The SELinux local users configuration file
- locale.h (0p)
- category macros
- localectl (1)
- Control the system locale and keyboard layout settings
- localgroups (5)
- Process checkgroups and output a list of changes
- lock_may_read (9)
- checks that the region is free of locks
- lock_may_write (9)
- checks that the region is free of locks
- lockfile (1)
- conditional semaphore-file creator
- locks_mandatory_area (9)
- Check for a conflicting lock
- locks_mandatory_locked (9)
- Check for an active lock
- locks_unlink_lock (9)
- Delete a lock and then free it.
- lockward (6x)
- Rotating spinning color-cycling things
- log (3)
- natural logarithmic function
- log (3p)
- natural logarithm function
- log10 (3)
- base-10 logarithmic function
- log10 (3p)
- base 10 logarithm function
- log10f (3)
- base-10 logarithmic function
- log10l (3)
- base-10 logarithmic function
- log1p (3)
- logarithm of 1 plus argument
- log1p (3p)
- compute a natural logarithm
- log1pf (3)
- logarithm of 1 plus argument
- log1pl (3)
- logarithm of 1 plus argument
- log2 (3)
- base-2 logarithmic function
- log2 (3p)
- compute base 2 logarithm functions
- log2f (3)
- base-2 logarithmic function
- log2l (3)
- base-2 logarithmic function
- Log::Dispatch (3)
- Dispatches messages to one or more outputs
- Log::Dispatch::ApacheLog (3)
- Object for logging to Apache::Log objects
- Log::Dispatch::Base (3)
- Code shared by dispatch and output objects.
- Log::Dispatch::Code (3)
- Object for logging to a subroutine reference
- Log::Dispatch::Email (3)
- Base class for objects that send log messages via ...
- Log::Dispatch::Email::MailSend (3)
- Subclass of Log::Dispatch::Email that us...
- Log::Dispatch::Email::MailSender (3)
- Subclass of Log::Dispatch::Email that ...
- Log::Dispatch::Email::MailSendmail (3)
- Subclass of Log::Dispatch::Email tha...
- Log::Dispatch::Email::MIMELite (3)
- Subclass of Log::Dispatch::Email that us...
- Log::Dispatch::File (3)
- Object for logging to files
- Log::Dispatch::File::Locked (3)
- Subclass of Log::Dispatch::File to facilita...
- Log::Dispatch::FileRotate (3)
- Log to Files that Archive/Rotate Themselves
- Log::Dispatch::FileRotate::Flock (3)
- File Locking Functions for Log::Dispat...
- Log::Dispatch::FileRotate::Mutex (3)
- Flock Based File Mutex.
- Log::Dispatch::Handle (3)
- Object for logging to IO::Handle classes
- Log::Dispatch::Null (3)
- Object that accepts messages and does nothing
- Log::Dispatch::Output (3)
- Base class for all Log::Dispatch::* objects
- Log::Dispatch::Screen (3)
- Object for logging to the screen
- Log::Dispatch::Syslog (3)
- Object for logging to system log.
- Log::Dispatch::Types (3)
- Types used for parameter checking in Log::Dispatch
- Log::Dispatch::Vars (3)
- Variables used internally by multiple packages
- Log::Log4perl::Appender::RRDs (3)
- Log to a RRDtool Archive
- Log::Log4perl::Appender::Synchronized (3)
- Synchronizing other appenders
- Log::Log4perl::Config::Watch (3)
- Detect file changes
- Log::Log4perl::DateFormat (3)
- Log4perl advanced date formatter helper class
- Log::Log4perl::Filter::Boolean (3)
- Special filter to combine the results of...
- Log::Log4perl::Filter::LevelMatch (3)
- Filter to match the log level exactly
- Log::Log4perl::Filter::MDC (3)
- Filter to match on values of a MDC key
- Log::Log4perl::Filter::StringMatch (3)
- Filter on log message string
- Log::Log4perl::JavaMap (3)
- maps java log4j appenders to Log::Dispatch classes
- Log::Log4perl::JavaMap::ConsoleAppender (3)
- wraps Log::Dispatch::Screen
- Log::Log4perl::JavaMap::FileAppender (3)
- wraps Log::Dispatch::File
- Log::Log4perl::JavaMap::NTEventLogApp... (3)
- wraps Log::Dispatch::Win32Even...
- Log::Log4perl::JavaMap::RollingFileAp... (3)
- wraps Log::Dispatch::FileRotate
- Log::Log4perl::Layout::NoopLayout (3)
- Pass-thru Layout
- Log::Log4perl::Resurrector (3)
- Dark Magic to resurrect hidden L4p statements
- Log::Log4perl::Util::Semaphore (3)
- Easy to use semaphores
- logf (3)
- natural logarithmic function
- logf (3p)
- natural logarithm function
- logger (1)
- a shell command interface to the syslog(3) system log ...
- LOGIMPORT (3)
- introduction to the library for importing data and cre...
- login (1)
- begin session on the system
- login.defs (5)
- shadow password suite configuration
- loginctl (1)
- Control the systemd login manager
- logl (3)
- natural logarithmic function
- logname (1p)
- return the user's login name
- logresolve (1)
- Resolve IP-addresses to hostnames in Apache log files
- logsave (8)
- save the output of a command in a logfile
- logwtmp (3)
- append an entry to the wtmp file
- look (1)
- display lines beginning with a given string
- lookbib (1)
- search bibliographic databases
- lookup_dcookie (2)
- return a directory entry's path
- lookup_one_len (9)
- filesystem helper to lookup single pathname component
- lower (n)
- Change a window's position in the stacking order
- lpinfo (8)
- show available devices or drivers (deprecated)
- lpq (1)
- show printer queue status
- lreplace (n)
- Replace elements in a list with new elements
- lreverse (n)
- Reverse the order of a list
- lscpu (1)
- display information about the CPU architecture
- lsdev (8)
- display information about installed hardware
- lsdiff (1)
- show which files are modified by a patch
- lsearch (3)
- linear search of an array
- lsearch (3p)
- linear search and update
- lsearch (n)
- See if a list contains a particular element
- lseek (3p)
- move the read/write file offset
- lset (n)
- Change an element in a list
- lslogins (1)
- display information about known users in the system
- lsmod (8)
- Show the status of modules in the Linux Kernel
- lsort (n)
- Sort the elements of a list
- lsscsi (8)
- list SCSI devices (or hosts) and their attributes
- luaotfload-tool (1)
- generate and query the Luaotfload font names database
- lutimes (3)
- change file timestamps
- lvchange (8)
- change attributes of a logical volume
- lvextend (8)
- extend the size of a logical volume
- lvmchange (8)
- change attributes of the logical volume manager
- lvmetad (8)
- LVM metadata cache daemon
- lvreduce (8)
- reduce the size of a logical volume
- lwp-download (1)
- Fetch large files from the web
- lwp-dump (1)
- See what headers and content is returned for a URL
- LWP::Protocol::https (3)
- Provide https support for LWP::UserAgent
- lwpcook (3)
- The libwww-perl cookbook
- lwpcook (3pm)
- The libwww-perl cookbook
- lxappearance (1)
- GTK+ theme switcher
- lxinput (1)
- a light-weight program to configure keyboard and mouse
- lxsession (1)
- a lightweight X session manager
- lxterminal (1)
- a lightweight terminal emulator based on GTK+ for the ...
- lzegrep (1)
- search compressed files for a regular expression
- lzfgrep (1)
- search compressed files for a regular expression
- lzgrep (1)
- search compressed files for a regular expression
- lzmainfo (1)
- show information stored in the .lzma file header
- machine-id (5)
- Local machine ID configuration file
- machine-info (5)
- Local machine information file
- machinectl (1)
- Control the systemd machine manager
- machineparameters (n)
- Compute double precision machine parameters.
- macpack (1)
- Macintosh OS X Packager for managed gui assemblies
- macusers (1)
- List the users connecting via AFP
- Magick-config (1)
- get information about the installed version of ImageMa...
- MagickCore-config (1)
- get information about the installed version of ImageM...
- MagickWand-config (1)
- get information about the installed version of the Ma...
- magnet-link (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- Mail::AuthenticationResults (3)
- Object Oriented Authentication-Results Headers
- Mail::AuthenticationResults::Foldable... (3)
- Class for modelling a foldable...
- Mail::AuthenticationResults::Header (3)
- Class modelling the Entire Authenti...
- Mail::AuthenticationResults::Header::... (3)
- Class modelling the AuthServID...
- Mail::AuthenticationResults::Header::... (3)
- Base class for modelling parts...
- Mail::AuthenticationResults::Header::... (3)
- Class modelling Comment parts ...
- Mail::AuthenticationResults::Header::... (3)
- Class modelling Main Entry par...
- Mail::AuthenticationResults::Header::... (3)
- Class modelling Groups of Auth...
- Mail::AuthenticationResults::Header::... (3)
- Class modelling Sub Entry part...
- Mail::AuthenticationResults::Header::... (3)
- Class modelling the AuthServID...
- Mail::AuthenticationResults::Parser (3)
- Class for parsing Authentication Re...
- Mail::AuthenticationResults::Token (3)
- Base class for modelling Authenticat...
- Mail::AuthenticationResults::Token::A... (3)
- Class for modelling Authentica...
- Mail::AuthenticationResults::Token::C... (3)
- Class for modelling Authentica...
- Mail::AuthenticationResults::Token::Q... (3)
- Class for modelling Authentica...
- Mail::AuthenticationResults::Token::S... (3)
- Class for modelling Authentica...
- Mail::AuthenticationResults::Token::S... (3)
- Class for modelling Authentica...
- Mail::AuthenticationResults::Token::S... (3)
- Class for modelling Authentica...
- Mail::DKIM::Algorithm::dk_rsa_sha1 (3)
- Base algorithm class
- Mail::DKIM::Algorithm::ed25519_sha256 (3)
- ed25519 sha256 algorithm class
- Mail::DKIM::Algorithm::rsa_sha1 (3)
- rsa sha1 algorithm class
- Mail::DKIM::Algorithm::rsa_sha256 (3)
- rsa sha256 algorithm class
- Mail::DKIM::MessageParser (3)
- Signs/verifies Internet mail with DKIM/Domain...
- Mail::DMARC::Report::Store::SQL::Gram... (3)
- Grammar for working with mysql...
- Mail::DMARC::Report::Store::SQL::Gram... (3)
- Grammar for working with pgsql...
- Mail::DMARC::Report::Store::SQL::Gram... (3)
- Grammar for working with sqlit...
- Mail::SpamAssassin::AutoWelcomelist (3)
- auto-welcomelist handler for SpamAs...
- Mail::SpamAssassin::AutoWhitelist (3pm)
- auto-whitelist handler for SpamAssa...
- Mail::SpamAssassin::Plugin::AuthRes (3)
- use Authentication-Results header f...
- Mail::SpamAssassin::Plugin::DMARC (3)
- check DMARC policy
- Mail::SpamAssassin::Plugin::Hashcash (3pm)
- perform hashcash verification tests
- Mail::SpamAssassin::Plugin::WelcomeLi... (3)
- welcomelist by Subject header
- Mail::SpamAssassin::Plugin::WhiteList... (3pm)
- whitelist by Subject header
- Mail::SpamAssassin::Pyzor::Digest::St... (3)
- Pyzor HTML-stripping module
- mailstat (1)
- shows mail-arrival statistics
- mailto-hebrew (1)
- Run the mailto program to send Hebrew/English mail
- make_method (1)
- Turn Perl code into an XML description for RPC::XML::S...
- makedefs (6)
- NetHack miscellaneous build-time functions
- makedumpfile.conf (5)
- The filter configuration file for makedumpfile(8).
- makehistory (8)
- Initialize or rebuild INN history database
- malloc_hook (3)
- malloc debugging variables
- malloc_trim (3)
- release free memory from the top of the heap
- malloc_usable_size (3)
- obtain size of block of memory allocated from heap
- man (1)
- an interface to the on-line reference manuals
- manconv (1)
- convert manual page from one encoding to another
- mandb (8)
- create or update the manual page index caches
- mangle_path (9)
- mangle and copy path to buffer beginning
- manpath (1)
- determine search path for manual pages
- manpath (5)
- format of the /etc/manpath.config file
- manpath.config (5)
- format of the /etc/manpath.config file
- map_geocode_nominatim (n)
- Resolving geographical names with a Nominatim ser...
- map_slippy_cache (n)
- Management of a tile cache in the local filesystem
- map_slippy_fetcher (n)
- Accessing a server providing tiles for slippy-based ...
- maple_add_packet (9)
- add a single instruction to the maple bus queue
- maple_getcond_callback (9)
- setup handling MAPLE_COMMAND_GETCOND
- mariadb (1)
- the MariaDB command-line tool (mysql is now a symlink ...
- mariadb-access (1)
- client for checking access privileges (mysqlaccess is ...
- mariadb-check (1)
- a table maintenance program (mysqlcheck is now a symli...
- mariadb-conv (1)
- character set conversion utility for MariaDB
- mariadb-embedded (1)
- the MariaDB command-line tool (mysql is now a symlink ...
- mariadb-hotcopy (1)
- a database backup program (mysqlhotcopy is now a symli...
- mariadb-service-convert (1)
- generate a mariadb.service file based on the cu...
- mariadb-show (1)
- display database, table, and column information (mysql...
- mariadb-tzinfo-to-sql (1)
- load the time zone tables (mysql_tzinfo_to_sql is...
- mariadb-upgrade (1)
- check tables for MariaDB upgrade (mysql_upgrade is now...
- mariadbd (8)
- the MariaDB server (mysqld is now a symlink to mariadbd)
- mariadbd-safe-helper (1)
- helper script (mysqld_safe_helper is now a symlink...
- mark (3menu)
- get and set the menu mark string
- mark_bbt_region (9)
- [GENERIC] mark the bad block table regions
- mark_buffer_dirty (9)
- mark a buffer_head as needing writeout
- masktest (1)
- Find differences in wildcard matching between Samba's ...
- urxvt-matcher-256color (1)
- match strings in terminal output and change thei...
- matchmediacon (3)
- get the default SELinux security context for the speci...
- matchpathcon (3)
- get the default SELinux security context for the speci...
- matchpathcon (8)
- get the default SELinux security context for the speci...
- matchpathcon_checkmatches (3)
- check and report whether any specification in...
- matchpathcon_filespec_add (3)
- check and report whether any specification in...
- matchpathcon_filespec_destroy (3)
- check and report whether any specificatio...
- matchpathcon_filespec_eval (3)
- check and report whether any specification i...
- matchpathcon_fini (3)
- get the default SELinux security context for the spec...
- matchpathcon_index (3)
- get the default SELinux security context for the spe...
- matchpathcon_init (3)
- get the default SELinux security context for the spec...
- matchpoint (1)
- Run feature detection and extraction
- math (n)
- Tcl Math Library
- math.h (0p)
- mathematical declarations
- Math::Base::Convert (3)
- very fast base to base conversion
- Math::Base::Convert::Bases (3)
- helper module for bases
- Math::Base::Convert::Bitmaps (3)
- pregenerated bit pattern to base power of ...
- Math::Base::Convert::CalcPP (3)
- standard methods used by Math::Base::Convert
- Math::Base::Convert::Shortcuts (3)
- methods for converting powers of 2 bases
- Math::BigInt (3)
- arbitrary size integer math package
- Math::BigInt::Calc (3)
- pure Perl module to support Math::BigInt
- Math::BigInt::FastCalc (3)
- Math::BigInt::Calc with some XS for more speed
- Math::BigInt::Lib (3)
- virtual parent class for Math::BigInt libraries
- Math::BigInt::LTM (3)
- Use the libtommath library for Math::BigInt routines
- Math::BigRat (3)
- arbitrary size rational number math package
- Math::Complex (3)
- complex numbers and associated mathematical functions
- qcomplex (n)
- Straightforward complex number package
- math_geometry (n)
- Geometrical computations
- Math::Int128 (3)
- Manipulate 128 bits integers in Perl
- Math::Int128::die_on_overflow (3)
- catch overflows when using Math::Int128
- numtheory (n)
- Number Theory
- special (n)
- Special mathematical functions
- Math::Trig (3)
- trigonometric functions
- math_error (7)
- detecting errors from mathematical functions
- matherr (3)
- SVID math library exception handling
- mathfunc (n)
- Mathematical functions for Tcl expressions
- mathop (n)
- Mathematical operators as Tcl commands
- mattrib (1)
- change MSDOS file attribute flags
- MB_CUR_MAX (3)
- maximum length of a multibyte character in the current...
- MB_LEN_MAX (3)
- maximum multibyte length of a character across all loc...
- mbadblocks (1)
- tests a floppy disk, and marks the bad blocks in the FAT
- mbchk (1)
- check the format of a Multiboot kernel
- mblen (3)
- determine number of bytes in next multibyte character
- mblen (3p)
- get number of bytes in a character
- mbrlen (3)
- determine number of bytes in next multibyte character
- mbrlen (3p)
- get number of bytes in a character (restartable)
- mbrtowc (3)
- convert a multibyte sequence to a wide character
- mbrtowc (3p)
- convert a character to a wide-character code (restarta...
- mbsinit (3)
- test for initial shift state
- mbsnrtowcs (3)
- convert a multibyte string to a wide-character string
- mbsrtowcs (3p)
- convert a character string to a wide-character string ...
- mbsrtowcs (3)
- convert a multibyte string to a wide-character string
- mbstowcs (3)
- convert a multibyte string to a wide-character string
- mbstowcs (3p)
- convert a character string to a wide-character string
- mbstream (1)
- Serialize/deserialize files in the XBSTREAM format
- mbtowc (3)
- convert a multibyte sequence to a wide character
- mbtowc (3p)
- convert a character to a wide-character code
- mc (1)
- Visual shell for Unix-like systems.
- mc-tool (1)
- manipulate Mission Control accounts from the command line
- mc-wait-for-name (1)
- run until a D-Bus name appears on the session bus
- mcd (1)
- change MSDOS directory
- MCE::Candy (3pm)
- Sugar methods and output iterators
- MCE::Channel (3pm)
- Queue-like and two-way communication capability
- MCE::Channel::Mutex (3pm)
- Channel for producer(s) and many consumers
- MCE::Channel::MutexFast (3pm)
- Fast channel for producer(s) and many consumers
- MCE::Channel::Simple (3pm)
- Channel tuned for one producer and one consumer
- MCE::Channel::SimpleFast (3pm)
- Fast channel tuned for one producer and one ...
- MCE::Channel::Threads (3pm)
- Channel for producer(s) and many consumers
- MCE::Channel::ThreadsFast (3pm)
- Fast channel for producer(s) and many consu...
- MCE::Child (3pm)
- A threads-like parallelization module compatible with ...
- MCE::Core (3pm)
- Documentation describing the core MCE API
- MCE::Core::Input::Handle (3pm)
- File path and Scalar reference input reader
- MCE::Core::Manager (3pm)
- Core methods for the manager process
- MCE::Core::Validation (3pm)
- Core validation methods for Many-Core Engine
- MCE::Core::Worker (3pm)
- Core methods for the worker process
- MCE::Grep (3pm)
- Parallel grep model similar to the native grep function
- MCE::Map (3pm)
- Parallel map model similar to the native map function
- MCE::Mutex::Channel (3pm)
- Mutex locking via a pipe or socket
- MCE::Mutex::Channel2 (3pm)
- Provides two mutexes using a single channel
- MCE::Queue (3pm)
- Hybrid (normal and priority) queues
- MCE::Relay (3pm)
- Extends Many-Core Engine with relay capabilities
- MCE::Signal (3pm)
- Temporary directory creation/cleanup and signal handling
- MCE::Stream (3pm)
- Parallel stream model for chaining multiple maps and g...
- MCE::Subs (3pm)
- Exports functions mapped directly to MCE methods
- mcedit (1)
- Internal file editor of GNU Midnight Commander.
- mcelog (8)
- Decode kernel machine check log on x86 machines
- mcheck (3)
- heap consistency checking
- mcheck_check_all (3)
- heap consistency checking
- mcheck_pedantic (3)
- heap consistency checking
- mcookie (1)
- generate magic cookies for xauth
- mcprint (3ncurses)
- ship binary data to printer
- mcview (1)
- Internal file viewer of GNU Midnight Commander.
- MD2 (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MD2_Final (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MD2_Init (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MD2_Update (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- md4 (n)
- MD4 Message-Digest Algorithm
- MD4_Final (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MD4_Init (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MD4_Update (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- md5 (3bsd)
- calculate the RSA Data Security, Inc., ``MD5'' message...
- md5 (n)
- MD5 Message-Digest Algorithm
- MD5_Final (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MD5_Init (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- MD5_Update (3osslssl-3)
- MD2, MD4, and MD5 hash functions
- md5sum (1)
- compute and check MD5 message digest
- mdadm.conf (5)
- configuration for management of Software RAID with mdadm
- MDC2 (3osslssl-3)
- MDC2 hash function
- MDC2_Final (3osslssl-3)
- MDC2 hash function
- MDC2_Init (3osslssl-3)
- MDC2 hash function
- MDC2_Update (3osslssl-3)
- MDC2 hash function
- mdio_bus_match (9)
- determine if given PHY driver supports the given PHY d...
- mdiobus_register (9)
- bring up all the PHYs on a given bus and attach them t...
- mdoc (7)
- quick reference guide for the -mdoc macro package
- mdoc-export-html (1)
- (unknown subject)
- mdoc.samples (7)
- tutorial sampler for writing BSD manuals with -mdoc
- mdsearch (1)
- Run Spotlight searches against an SMB server
- mdu (1)
- display the amount of space occupied by an MSDOS direc...
- mdvalidater (1)
- Validate XML Documents against the ECMA Documentation ...
- memcache_table (5)
- Postfix memcache client configuration
- memchan (n)
- In-memory channel
- memchr (3)
- scan memory for a character
- memchr (3p)
- find byte in memory
- memchr (9)
- Find a character in an area of memory.
- memchr_inv (9)
- Find an unmatching character in an area of memory.
- memcpy (9)
- Copy one area of memory to another
- memleaks (3ncurses)
- curses memory-leak checking
- memmove (3p)
- copy bytes in memory with overlapping areas
- memmove (9)
- Copy one area of memory to another
- Memoize::SDBM_File (3)
- DEPRECATED compability shim
- memparse (9)
- parse a string with mem suffixes into a number
- mempool_free (9)
- return an element to the pool.
- memrchr (3)
- scan memory for a character
- memscan (9)
- Find a character in an area of memory.
- memscroller (6x)
- scrolls a dump of its own RAM across the screen
- memset (3)
- fill memory with a constant byte
- memset (9)
- Fill a region of memory with the given value
- menu_driver (3menu)
- command-processing loop of the menu system
- menu_hook (3menu)
- set hooks for automatic invocation by applications
- menu_init (3menu)
- set hooks for automatic invocation by applications
- menu_mark (3menu)
- get and set the menu mark string
- menu_request_by_name (3menu)
- handle printable menu request names
- menu_request_name (3menu)
- handle printable menu request names
- menu_requestname (3menu)
- handle printable menu request names
- menu_term (3menu)
- set hooks for automatic invocation by applications
- menu_userptr (3menu)
- associate application data with a menu item
- menu_visible (3menu)
- check visibility of a menu item
- merge (1)
- three-way file merge
- mergelib (1)
- merge one library into another
- mesg (1)
- display (or do not display) messages from other users
- meson (1)
- a high productivity build system
- metamail (1)
- infrastructure for mailcap-based multimedia mail handling
- mgrep (1)
- search mimencoded files for a regular expression
- mhash (3)
- Hash Library
- mib2c (1)
- generate template code for extending the agent
- might_sleep (9)
- annotation for functions that can sleep
- migrate_pages (2)
- move all pages in a process to another set of nodes
- migratepages (8)
- Migrate the physical location a processes pages
- migspeed (8)
- Test the speed of page migration
- mimecheck (1)
- determine the type of the MIME encoded of an attachment
- min_not_zero (9)
- return the minimum that is _not_ zero, unless both are...
- mincore (2)
- determine whether pages are resident in memory
- minfo (1)
- print the parameters of a MSDOS filesystem
- mirrorblob (6x)
- Draws a wobbly blob that distorts the image behind it.
- mission-control-5 (8)
- Telepathy account manager/chanel dispatcher
- mitem_userptr (3menu)
- associate application data with a menu item
- mitem_visible (3menu)
- check visibility of a menu item
- Mixin::Linewise (3)
- write your linewise code for handles; this does the rest
- mk_isdnhwdb (1)
- (unknown subject)
- mkcomposecache (8)
- create a cache file for a compose file explicitly
- mkdirhier (1)
- makes a directory hierarchy
- mkdumprd (8)
- (Re)build the initramfs for kdump
- mkhomedir_helper (8)
- Helper binary that creates home directories
- mkhtmlindex (1)
- generate index files for HTML man pages
- mkisofs (1)
- create ISO9660/Joliet/HFS filesystem with optional Roc...
- mkmanifest (1)
- makes list of file names and their DOS 8+3 equivalent
- mknod (1)
- make block or character special files
- mktime (3p)
- convert broken-down time into time since the Epoch
- mkzimage_cmdline (8)
- edit the built-in kernel cmdline in a PowerPC CHRP zImage
- MLDBM (3pm)
- store multi-level Perl hash structure in single level ...
- mlockall (3p)
- lock/unlock the address space of a process (REALTIME)
- mmcli (8)
- Control and monitor the ModemManager
- MMDB_aget_value (3)
- a library for working with MaxMind DB files
- MMDB_close (3)
- a library for working with MaxMind DB files
- MMDB_dump_entry_data_list (3)
- a library for working with MaxMind DB files
- MMDB_free_entry_data_list (3)
- a library for working with MaxMind DB files
- MMDB_get_entry_data_list (3)
- a library for working with MaxMind DB files
- MMDB_get_metadata_as_entry_data_list (3)
- a library for working with MaxMind...
- MMDB_get_value (3)
- a library for working with MaxMind DB files
- MMDB_lib_version (3)
- a library for working with MaxMind DB files
- MMDB_lookup_sockaddr (3)
- a library for working with MaxMind DB files
- MMDB_lookup_string (3)
- a library for working with MaxMind DB files
- MMDB_open (3)
- a library for working with MaxMind DB files
- MMDB_read_node (3)
- a library for working with MaxMind DB files
- MMDB_strerror (3)
- a library for working with MaxMind DB files
- MMDB_vget_value (3)
- a library for working with MaxMind DB files
- mmv_lookup_value_desc (3)
- find a value in the Memory Mapped Value file
- mn (7)
- text formatting macros for the news documentation
- mng (5)
- Multiple-image Network Graphics (MNG) format
- mnh (7)
- additional text formatting macros for the NetHack Guid...
- mod-active (8)
- Batch processing of newsgroups creation and removal co...
- mod_mono (8)
- apache module that enables ASP.NET pages. Works togeth...
- mod_perl2 (3)
- Embed a Perl interpreter in the Apache/2.x HTTP server
- mod_perl2 (3pm)
- Embed a Perl interpreter in the Apache/2.x HTTP server
- mode2 (1)
- shows the pulse/space length of infrared signals
- modinfo (8)
- Show information about a Linux Kernel module
- modprobe (8)
- Add and remove modules from the Linux Kernel
- Module::CoreList (3)
- what modules shipped with versions of perl
- Module::CoreList::Utils (3)
- what utilities shipped with versions of perl
- Module::Load (3)
- runtime require of both modules and files
- module_driver (9)
- Helper macro for drivers that don't do anything specia...
- module_i2c_driver (9)
- Helper macro for registering a I2C driver
- module_spi_driver (9)
- Helper macro for registering a SPI driver
- module_usb_driver (9)
- Helper macro for registering a USB driver
- moduli (5)
- Diffie-Hellman moduli
- moebius (6x)
- Escher's Moebuis Strip II, with ants.
- mogrify (1)
- resize an image, blur, crop, despeckle, dither, draw o...
- monetary.h (0p)
- monetary types
- mono-service (1)
- Mono ServiceProcess host
- mono-shlib-cop (1)
- Shared Library Usage Checker
- monodocs2html (1)
- Translate Monodoc XML to HTML
- Moose::Cookbook (3pm)
- How to cook a Moose
- Moose::Cookbook::Basics::BankAccount_... (3pm)
- Demonstrates the use of meth...
- Moose::Cookbook::Basics::BinaryTree_B... (3pm)
- Builder methods and lazy_build
- Moose::Cookbook::Basics::Company_Subt... (3pm)
- Demonstrates the use of subt...
- Moose::Cookbook::Basics::Document_Aug... (3pm)
- The augment modifier, which ...
- Moose::Cookbook::Basics::HTTP_Subtype... (3pm)
- Demonstrates subtypes and co...
- Moose::Cookbook::Extending::Debugging... (3pm)
- Providing a role for the bas...
- Moose::Cookbook::Extending::Mooseish_... (3pm)
- Acting like Moose.pm and pro...
- Moose::Cookbook::Meta::PrivateOrPubli... (3pm)
- A method metaclass for marki...
- Moose::Cookbook::Meta::WhyMeta (3pm)
- Welcome to the meta world (Why Go Meta?)
- Moose::Intro (3pm)
- Expanded into Moose::Manual, so go read that
- Moose::Manual (3pm)
- What is Moose, and how do I use it?
- Moose::Manual::Attributes (3pm)
- Object attributes with Moose
- Moose::Manual::BestPractices (3pm)
- Get the most out of Moose
- Moose::Manual::Contributing (3pm)
- How to get involved in Moose
- Moose::Manual::Delta (3pm)
- Important Changes in Moose
- Moose::Manual::MethodModifiers (3pm)
- Moose's method modifiers
- Moose::Manual::MOP (3pm)
- The Moose (and Class::MOP) meta API
- Moose::Manual::Roles (3pm)
- Roles, an alternative to deep hierarchies and ba...
- Moose::Manual::Unsweetened (3pm)
- Moose idioms in plain old Perl 5 without t...
- Moose::Meta::Attribute (3pm)
- The Moose attribute metaclass
- Moose::Meta::Attribute::Native::Trait (3pm)
- Shared role for native delegati...
- Moose::Meta::Attribute::Native::Trait... (3pm)
- Helper trait for ArrayRef at...
- Moose::Meta::Attribute::Native::Trait... (3pm)
- Helper trait for Bool attrib...
- Moose::Meta::Attribute::Native::Trait... (3pm)
- Helper trait for CodeRef att...
- Moose::Meta::Attribute::Native::Trait... (3pm)
- Helper trait for Int attribu...
- Moose::Meta::Attribute::Native::Trait... (3pm)
- Helper trait for HashRef att...
- Moose::Meta::Attribute::Native::Trait... (3pm)
- Helper trait for Num attributes
- Moose::Meta::Attribute::Native::Trait... (3pm)
- Helper trait for Str attributes
- Moose::Meta::Class (3pm)
- The Moose metaclass
- Moose::Meta::Instance (3pm)
- The Moose Instance metaclass
- Moose::Meta::Method (3pm)
- A Moose Method metaclass
- Moose::Meta::Method::Accessor (3pm)
- A Moose Method metaclass for accessors
- Moose::Meta::Method::Augmented (3pm)
- A Moose Method metaclass for augmented...
- Moose::Meta::Method::Constructor (3pm)
- Method Meta Object for constructors
- Moose::Meta::Method::Delegation (3pm)
- A Moose Method metaclass for delegati...
- Moose::Meta::Method::Destructor (3pm)
- Method Meta Object for destructors
- Moose::Meta::Method::Meta (3pm)
- A Moose Method metaclass for "meta" methods
- Moose::Meta::Method::Overridden (3pm)
- A Moose Method metaclass for overridd...
- Moose::Meta::Mixin::AttributeCore (3pm)
- Core attributes shared by attribute...
- Moose::Meta::Role (3pm)
- The Moose Role metaclass
- Moose::Meta::Role::Application::ToRole (3pm)
- Compose a role into another role
- Moose::Meta::Role::Attribute (3pm)
- The Moose attribute metaclass for Roles
- Moose::Meta::Role::Composite (3pm)
- An object to represent the set of roles
- Moose::Meta::Role::Method (3pm)
- A Moose Method metaclass for Roles
- Moose::Meta::Role::Method::Conflicting (3pm)
- A Moose metaclass for conflict...
- Moose::Meta::Role::Method::Required (3pm)
- A Moose metaclass for required me...
- Moose::Meta::TypeCoercion (3pm)
- The Moose Type Coercion metaclass
- Moose::Meta::TypeCoercion::Union (3pm)
- The Moose Type Coercion metaclass fo...
- Moose::Meta::TypeConstraint (3pm)
- The Moose Type Constraint metaclass
- Moose::Meta::TypeConstraint::Class (3pm)
- Class/TypeConstraint parallel hier...
- Moose::Meta::TypeConstraint::Paramete... (3pm)
- Type constraints which can t...
- Moose::Meta::TypeConstraint::Paramete... (3pm)
- Type constraints with a boun...
- Moose::Meta::TypeConstraint::Role (3pm)
- Role/TypeConstraint parallel hierarchy
- Moose::Object (3pm)
- The base object for Moose
- Moose::Role (3pm)
- The Moose Role
- Moose::Spec::Role (3pm)
- Formal spec for Role behavior
- Moose::Unsweetened (3pm)
- Moved to Moose::Manual::Unsweetened, so go read that
- Moose::Util (3pm)
- Utilities for working with Moose classes
- Moose::Util::MetaRole (3pm)
- Apply roles to any metaclass, as well as the ob...
- morph3d (6x)
- 3d morphing objects.
- morse (6)
- "reformat input as punch cards, paper tape or morse code"
- motd (5)
- message of the day
- motd.innd (5)
- Message of the day information for feeders or readers
- motd.news (5)
- Message of the day information for feeders or readers
- motd.nnrpd (5)
- Message of the day information for feeders or readers
- mount.cifs (8)
- mount using the Common Internet File System (CIFS)
- mount.lowntfs-3g (8)
- Third Generation Read/Write NTFS Driver
- mount.ntfs (8)
- Third Generation Read/Write NTFS Driver
- mount.ntfs-3g (8)
- Third Generation Read/Write NTFS Driver
- mountain (6x)
- random 3D plots that look vaguely mountainous.
- mouse (3ncurses)
- mouse interface through curses
- mouse_trafo (3ncurses)
- mouse interface through curses
- mouseinterval (3ncurses)
- mouse interface through curses
- mousemask (3ncurses)
- mouse interface through curses
- mousetweaks (1)
- Accessibility enhancements for pointing devices
- move_pages (2)
- move individual pages of a process to another node
- mpage_readpages (9)
- populate an address space with some pages & start read...
- mpage_writepages (9)
- walk the list of dirty pages of the given address spac...
- mpartition (1)
- partition an MSDOS hard disk
- mpathpersist (8)
- (unknown subject)
- mpi-selector-menu (1)
- A menu-based wrapper around the mpi-selector command
- mpool (3)
- shared memory buffer pool
- mpost (1)
- MetaPost, a system for creating graphics
- mprobe (3)
- heap consistency checking
- mpt-status (8)
- retrieve configuration and health status from LSI hard...
- mpt_adapter_disable (9)
- Disable misbehaving MPT adapter.
- mpt_adapter_dispose (9)
- Free all resources associated with an MPT adapter
- mpt_add_chain (9)
- Place a 32 bit chain SGE at address pAddr.
- mpt_add_chain_64bit (9)
- Place a 64 bit chain SGE at address pAddr.
- mpt_attach (9)
- Install a PCI intelligent MPT adapter.
- mpt_clear_taskmgmt_in_progress_flag (9)
- clear flags associated with task ma...
- mpt_detach (9)
- Remove a PCI intelligent MPT adapter.
- mpt_detect_bound_ports (9)
- Search for matching PCI bus/dev_function
- mpt_device_driver_deregister (9)
- DeRegister device driver hooks
- mpt_device_driver_register (9)
- Register device driver hooks
- mpt_diag_reset (9)
- Perform hard reset of the adapter.
- mpt_event_deregister (9)
- Deregister protocol-specific event callback handler
- mpt_event_register (9)
- Register protocol-specific event callback handler.
- mpt_fc_log_info (9)
- Log information returned from Fibre Channel IOC.
- mpt_findImVolumes (9)
- Identify IDs of hidden disks and RAID Volumes
- mpt_get_msg_frame (9)
- Obtain an MPT request frame from the pool
- mpt_GetIocState (9)
- Get the current state of a MPT adapter.
- mpt_halt_firmware (9)
- Halts the firmware if it is operational and panic the...
- mpt_handshake_req_reply_wait (9)
- Send MPT request to and receive reply from...
- mpt_HardResetHandler (9)
- Generic reset handler
- mpt_host_page_access_control (9)
- control the IOC's Host Page Buffer access
- mpt_host_page_alloc (9)
- allocate system memory for the fw
- mpt_inactive_raid_list_free (9)
- This clears this link list.
- mpt_inactive_raid_volumes (9)
- sets up link list of phy_disk_nums for device...
- mpt_interrupt (9)
- MPT adapter (IOC) specific interrupt handler.
- mpt_ioc_reset (9)
- Base cleanup for hard reset
- mpt_is_discovery_complete (9)
- determine if discovery has completed
- mpt_put_msg_frame_hi_pri (9)
- Send a hi-pri protocol-specific MPT request frame
- mpt_raid_phys_disk_get_num_paths (9)
- returns number paths associated to thi...
- mpt_raid_phys_disk_pg0 (9)
- returns phys disk page zero
- mpt_raid_phys_disk_pg1 (9)
- returns phys disk page 1
- mpt_readScsiDevicePageHeaders (9)
- save version and length of SDP1
- mpt_register (9)
- Register protocol-specific main callback handler.
- mpt_remove_dead_ioc_func (9)
- kthread context to remove dead ioc
- mpt_reset_deregister (9)
- Deregister protocol-specific IOC reset handler.
- mpt_reset_register (9)
- Register protocol-specific IOC reset handler.
- mpt_send_handshake_request (9)
- Send MPT request via doorbell handshake method.
- mpt_set_taskmgmt_in_progress_flag (9)
- set flags associated with task manage...
- mpt_Soft_Hard_ResetHandler (9)
- Try less expensive reset
- mpt_SoftResetHandler (9)
- Issues a less expensive reset
- mptctl_syscall_down (9)
- Down the MPT adapter syscall semaphore.
- mptfc_init (9)
- Register MPT adapter(s) as SCSI host(s) with SCSI mid-...
- mptscsih_abort (9)
- Abort linux scsi_cmnd routine, new_eh variant
- mptscsih_bus_reset (9)
- Perform a SCSI BUS_RESET! new_eh variant
- mptscsih_dev_reset (9)
- Perform a SCSI TARGET_RESET! new_eh variant
- mptscsih_do_cmd (9)
- Do internal command.
- mptscsih_get_completion_code (9)
- get completion code from MPT request
- mptscsih_get_scsi_lookup (9)
- retrieves scmd entry
- mptscsih_getclear_scsi_lookup (9)
- retrieves and clears scmd entry from Scsi...
- mptscsih_host_reset (9)
- Perform a SCSI host adapter RESET (new_eh variant)
- mptscsih_info (9)
- Return information about MPT adapter
- mptscsih_info_scsiio (9)
- debug print info on reply frame
- mptscsih_IssueTaskMgmt (9)
- Generic send Task Management function.
- mptscsih_qcmd (9)
- Primary Fusion MPT SCSI initiator IO start routine.
- mptscsih_set_scsi_lookup (9)
- write a scmd entry into the ScsiLookup[] array...
- mptscsih_synchronize_cache (9)
- Send SYNCHRONIZE_CACHE to all disks.
- mptscsih_taskmgmt_complete (9)
- Registered with Fusion MPT base driver
- mptspi_init (9)
- Register MPT adapter(s) as SCSI host(s) with SCSI mid-...
- mptspi_is_raid (9)
- Determines whether target is belonging to volume
- mptspi_print_read_nego (9)
- negotiation parameters debug info that is being ...
- mptspi_print_write_nego (9)
- negotiation parameters debug info that is being...
- mptspi_setTargetNegoParms (9)
- Update the target negotiation parameters
- mq_notify (2)
- register for notification when a message is available
- mq_notify (3)
- register for notification when a message is available
- mq_notify (3p)
- notify process that a message is available (REALTIME)
- mqueue.h (0p)
- message queues (REALTIME)
- mro (3)
- Method Resolution Order
- mrtg (1)
- What is MRTG ?
- mrtg-faq (1)
- How to get help if you have problems with MRTG
- mrtg-forum (1)
- Interactive Help for MRTG users
- mrtg-logfile (1)
- description of the mrtg-2 logfile format
- mrtg-mibhelp (1)
- A Table of some interesting OIDs
- mrtg-nt-guide (1)
- The MRTG 2.17.4 Windows Installation Guide
- mrtg-rrd (1)
- How to use RRDtool with MRTG
- mrtg-traffic-sum (1)
- Builds monthly traffic summary from mrtg log files
- mrtg-unix-guide (1)
- The MRTG 2.17.4 Linux/Unix Installation Guide
- mrtg-webserver (1)
- hints for web server configuration
- msgattrib (1)
- attribute matching and manipulation on message catalog
- msgcomm (1)
- match two message catalogs
- msgconv (1)
- character set conversion for message catalog
- msgen (1)
- create English message catalog
- msgget (3p)
- get the XSI message queue identifier
- msggrep (1)
- pattern matching on message catalog
- mshortname (1)
- shows short name of a file
- mshowfat (1)
- shows FAT clusters allocated to file
- msleep (9)
- sleep safely even with waitqueue interruptions
- msql2mysql (1)
- convert mSQL programs for use with MySQL
- msync (2)
- synchronize a file with a memory map
- msync (3p)
- synchronize memory with physical storage
- mtoolstest (1)
- tests and displays the configuration
- mtx-cache (1)
- (unknown subject)
- mtx-chars (1)
- (unknown subject)
- mtx-check (1)
- (unknown subject)
- mtx-watch (1)
- (unknown subject)
- multipath (8)
- Device mapper target autoconfig
- multipath.conf (5)
- multipath daemon configuration file
- multipathd (8)
- multipath daemon
- multiplexer (n)
- One-to-many communication with sockets.
- multixterm (1)
- drive multiple xterms separately or together
- munch (6x)
- munching squares
- munchlist (1)
- Interactive spelling checking
- munlockall (3p)
- unlock the address space of a process
- mupdf (1)
- MuPDF is a lightweight PDF viewer written in portable C
- mutex_init (9)
- initialize the mutex
- mutex_is_locked (9)
- is the mutex locked
- mutex_lock (9)
- acquire the mutex
- mutex_lock_interruptible (9)
- acquire the mutex, interruptible
- mutex_trylock (9)
- try to acquire the mutex, without waiting
- mutex_unlock (9)
- release the mutex
- mutool (1)
- all purpose tool for dealing with PDF files
- mvadd_wch (3ncurses)
- add a complex character and rendition to a curses wind...
- mvadd_wchnstr (3ncurses)
- add an array of complex characters (and attributes...
- mvadd_wchstr (3ncurses)
- add an array of complex characters (and attributes)...
- mvaddch (3ncurses)
- add a character (with attributes) to a curses window, ...
- mvaddchnstr (3ncurses)
- add a string of characters (and attributes) to a cur...
- mvaddchstr (3ncurses)
- add a string of characters (and attributes) to a curs...
- mvaddnstr (3ncurses)
- add a string of characters to a curses window and adva...
- mvaddnwstr (3ncurses)
- add a string of wide characters to a curses window an...
- mvaddstr (3ncurses)
- add a string of characters to a curses window and adva...
- mvaddwstr (3ncurses)
- add a string of wide characters to a curses window and...
- mvchgat (3ncurses)
- curses character and window attribute control routines
- mvdelch (3ncurses)
- delete character under the cursor in a curses window
- mvget_wch (3ncurses)
- get (or push back) a wide character from curses termin...
- mvget_wstr (3ncurses)
- get an array of wide characters from a curses termina...
- mvgetch (3ncurses)
- get (or push back) characters from curses terminal key...
- mvgetn_wstr (3ncurses)
- get an array of wide characters from a curses termin...
- mvgetnstr (3ncurses)
- accept character strings from curses terminal keyboard
- mvgetstr (3ncurses)
- accept character strings from curses terminal keyboard
- mvhline (3ncurses)
- create curses borders, horizontal and vertical lines
- mvhline_set (3ncurses)
- create curses borders or lines using complex charact...
- mvin_wch (3ncurses)
- extract a complex character and rendition from a window
- mvin_wchnstr (3ncurses)
- get an array of complex characters and renditions f...
- mvin_wchstr (3ncurses)
- get an array of complex characters and renditions fr...
- mvinch (3ncurses)
- get a character and attributes from a curses window
- mvinchnstr (3ncurses)
- get a string of characters (and attributes) from a cu...
- mvinchstr (3ncurses)
- get a string of characters (and attributes) from a cur...
- mvinnstr (3ncurses)
- get a string of characters from a curses window
- mvinnwstr (3ncurses)
- get a string of wchar_t characters from a curses window
- mvins_nwstr (3ncurses)
- insert a wide-character string into a curses window
- mvins_wch (3ncurses)
- insert a complex character and rendition into a window
- mvins_wstr (3ncurses)
- insert a wide-character string into a curses window
- mvinsch (3ncurses)
- insert a character before cursor in a curses window
- mvinstr (3ncurses)
- get a string of characters from a curses window
- mvinwstr (3ncurses)
- get a string of wchar_t characters from a curses window
- mvvline (3ncurses)
- create curses borders, horizontal and vertical lines
- mvvline_set (3ncurses)
- create curses borders or lines using complex charact...
- mvwadd_wch (3ncurses)
- add a complex character and rendition to a curses win...
- mvwadd_wchnstr (3ncurses)
- add an array of complex characters (and attribute...
- mvwadd_wchstr (3ncurses)
- add an array of complex characters (and attributes...
- mvwaddch (3ncurses)
- add a character (with attributes) to a curses window, ...
- mvwaddchnstr (3ncurses)
- add a string of characters (and attributes) to a cu...
- mvwaddchstr (3ncurses)
- add a string of characters (and attributes) to a cur...
- mvwaddnstr (3ncurses)
- add a string of characters to a curses window and adv...
- mvwaddnwstr (3ncurses)
- add a string of wide characters to a curses window a...
- mvwaddstr (3ncurses)
- add a string of characters to a curses window and adva...
- mvwaddwstr (3ncurses)
- add a string of wide characters to a curses window an...
- mvwchgat (3ncurses)
- curses character and window attribute control routines
- mvwdelch (3ncurses)
- delete character under the cursor in a curses window
- mvwget_wch (3ncurses)
- get (or push back) a wide character from curses termi...
- mvwget_wstr (3ncurses)
- get an array of wide characters from a curses termin...
- mvwgetch (3ncurses)
- get (or push back) characters from curses terminal key...
- mvwgetn_wstr (3ncurses)
- get an array of wide characters from a curses termi...
- mvwgetnstr (3ncurses)
- accept character strings from curses terminal keyboard
- mvwgetstr (3ncurses)
- accept character strings from curses terminal keyboard
- mvwhline (3ncurses)
- create curses borders, horizontal and vertical lines
- mvwhline_set (3ncurses)
- create curses borders or lines using complex charac...
- mvwin_wch (3ncurses)
- extract a complex character and rendition from a window
- mvwin_wchnstr (3ncurses)
- get an array of complex characters and renditions ...
- mvwin_wchstr (3ncurses)
- get an array of complex characters and renditions f...
- mvwinch (3ncurses)
- get a character and attributes from a curses window
- mvwinchnstr (3ncurses)
- get a string of characters (and attributes) from a c...
- mvwinchstr (3ncurses)
- get a string of characters (and attributes) from a cu...
- mvwinnstr (3ncurses)
- get a string of characters from a curses window
- mvwinnwstr (3ncurses)
- get a string of wchar_t characters from a curses window
- mvwins_nwstr (3ncurses)
- insert a wide-character string into a curses window
- mvwins_wch (3ncurses)
- insert a complex character and rendition into a window
- mvwins_wstr (3ncurses)
- insert a wide-character string into a curses window
- mvwinsch (3ncurses)
- insert a character before cursor in a curses window
- mvwinstr (3ncurses)
- get a string of characters from a curses window
- mvwinwstr (3ncurses)
- get a string of wchar_t characters from a curses window
- mvwvline (3ncurses)
- create curses borders, horizontal and vertical lines
- mvwvline_set (3ncurses)
- create curses borders or lines using complex charac...
- my (n)
- invoke any method of current object
- my_safe_process (1)
- Utility program that encapsulates process creation, mo...
- myisamchk (1)
- MyISAM table-maintenance utility
- myrocks_hotbackup (1)
- streaming backup for MariaDB MyRocks
- mysql (1)
- the MariaDB command-line tool (mysql is now a symlink ...
- mysql_embedded (1)
- the MariaDB command-line tool (mysql is now a symlink ...
- mysql_tzinfo_to_sql (1)
- load the time zone tables (mysql_tzinfo_to_sql is n...
- mysql_upgrade (1)
- check tables for MariaDB upgrade (mysql_upgrade is now...
- mysqlaccess (1)
- client for checking access privileges (mysqlaccess is ...
- mysqlcheck (1)
- a table maintenance program (mysqlcheck is now a symli...
- mysqld (8)
- the MariaDB server (mysqld is now a symlink to mariadbd)
- mysqld_safe_helper (1)
- helper script (mysqld_safe_helper is now a symlink t...
- mysqlhotcopy (1)
- a database backup program (mysqlhotcopy is now a symli...
- mysqlshow (1)
- display database, table, and column information (mysql...
- MyTest::Util (3pm)
- - helper functions
- mzip (1)
- change protection mode and eject disk on Zip/Jaz drive
- name_to_handle_at (2)
- obtain handle for a pathname and open file via a handle
- named-checkconf (1)
- named configuration file syntax checking tool
- named-checkzone (1)
- zone file validity checking or converting tool
- named-compilezone (1)
- zone file validity checking or converting tool
- named-journalprint (1)
- print zone journal in human-readable form
- named-rrchecker (1)
- syntax checker for individual DNS resource records
- namei (1)
- follow a pathname until a terminal point is found
- nns_common (n)
- Name service facility, shared definitions
- namespace.conf (5)
- the namespace configuration file
- NAMING_AUTHORITY (3osslssl-3)
- Accessors and settors for ADMISSION_SYNTAX
- NAMING_AUTHORITY_free (3osslssl-3)
- ASN1 object utilities
- NAMING_AUTHORITY_get0_authorityId (3osslssl-3)
- Accessors and settors for AD...
- NAMING_AUTHORITY_get0_authorityText (3osslssl-3)
- Accessors and settors for ...
- NAMING_AUTHORITY_get0_authorityURL (3osslssl-3)
- Accessors and settors for A...
- NAMING_AUTHORITY_new (3osslssl-3)
- ASN1 object utilities
- NAMING_AUTHORITY_set0_authorityId (3osslssl-3)
- Accessors and settors for AD...
- NAMING_AUTHORITY_set0_authorityText (3osslssl-3)
- Accessors and settors for ...
- NAMING_AUTHORITY_set0_authorityURL (3osslssl-3)
- Accessors and settors for A...
- nanosleep (2)
- high-resolution sleep
- nanosleep (3p)
- high resolution sleep
- napi_disable (9)
- prevent NAPI from scheduling
- napi_enable (9)
- enable NAPI scheduling
- napi_schedule (9)
- schedule NAPI poll
- napi_schedule_prep (9)
- check if napi can be scheduled
- napi_synchronize (9)
- wait until NAPI is not running
- nasm (1)
- the Netwide Assembler, a portable 80x86 assembler
- nautilus (1)
- the GNOME File Manager
- ncftp (1)
- Browser program for the File Transfer Protocol
- ncftpbatch (1)
- Individual batch FTP job processor
- ncftpspooler (1)
- Global batch FTP job processor daemon
- ncurses (3ncurses)
- CRT screen handling and optimization package
- ncurses5-config (1)
- helper script for ncurses libraries
- ncurses6-config (1)
- helper script for ncurses libraries
- ncursesw5-config (1)
- helper script for ncurses libraries
- ncursesw6-config (1)
- helper script for ncurses libraries
- ndbm.h (0p)
- definitions for ndbm database operations
- ndisasm (1)
- the Netwide Disassembler, an 80x86 binary file disasse...
- ne_add_request_header (3)
- add headers to a request
- ne_addr_destroy (3)
- functions to resolve hostnames to addresses
- ne_addr_error (3)
- functions to resolve hostnames to addresses
- ne_addr_first (3)
- functions to resolve hostnames to addresses
- ne_addr_next (3)
- functions to resolve hostnames to addresses
- ne_addr_resolve (3)
- functions to resolve hostnames to addresses
- ne_addr_result (3)
- functions to resolve hostnames to addresses
- ne_buffer (3)
- string buffer handling
- ne_buffer_finish (3)
- destroy a buffer object
- ne_close_connection (3)
- set up HTTP sessions
- ne_forget_auth (3)
- register authentication callbacks
- ne_get_error (3)
- error handling for HTTP sessions
- ne_get_response_header (3)
- functions to access response headers
- ne_get_scheme (3)
- common properties for HTTP sessions
- ne_get_server_hostport (3)
- common properties for HTTP sessions
- ne_get_status (3)
- retrieve HTTP response status for request
- ne_has_support (3)
- determine feature support status
- ne_print_request_header (3)
- add headers to a request
- ne_request_create (3)
- low-level HTTP request handling
- ne_request_destroy (3)
- low-level HTTP request handling
- ne_request_dispatch (3)
- low-level HTTP request handling
- ne_response_header_iterate (3)
- functions to access response headers
- ne_session_create (3)
- set up HTTP sessions
- ne_session_destroy (3)
- set up HTTP sessions
- ne_set_connect_timeout (3)
- common properties for HTTP sessions
- ne_set_error (3)
- error handling for HTTP sessions
- ne_set_proxy_auth (3)
- register authentication callbacks
- ne_set_read_timeout (3)
- common properties for HTTP sessions
- ne_set_request_body_buffer (3)
- include a message body with a request
- ne_set_request_body_fd (3)
- include a message body with a request
- ne_set_server_auth (3)
- register authentication callbacks
- ne_set_useragent (3)
- common properties for HTTP sessions
- ne_shave (3)
- trim whitespace from a string
- ne_ssl_clicert_decrypt (3)
- SSL client certificate handling
- ne_ssl_clicert_encrypted (3)
- SSL client certificate handling
- ne_ssl_clicert_free (3)
- SSL client certificate handling
- ne_ssl_clicert_name (3)
- SSL client certificate handling
- ne_ssl_clicert_owner (3)
- SSL client certificate handling
- ne_ssl_clicert_read (3)
- SSL client certificate handling
- ne_ssl_dname_cmp (3)
- SSL distinguished name handling
- ne_ssl_readable_dname (3)
- SSL distinguished name handling
- ne_ssl_trust_cert (3)
- functions to indicate that certificates are trusted
- ne_ssl_trust_default_ca (3)
- functions to indicate that certificates are tru...
- ne_status (3)
- HTTP status structure
- ne_version_match (3)
- library versioning
- neato (1)
- filter for drawing undirected graphs
- negotiate_kerberos_auth (8)
- Squid kerberos based authentication helper
- neon (3)
- HTTP and WebDAV client library
- neotoppm (1)
- convert an Atari Neochrome .neo into a PPM image
- nerverot (6x)
- induces edginess in the viewer
- net_if.h (0p)
- sockets local interfaces
- Net::DBus (3pm)
- Perl extension for the DBus message system
- Net::DBus::Annotation (3pm)
- annotations for changing behaviour of APIs
- Net::DBus::ASyncReply (3pm)
- asynchronous method reply handler
- Net::DBus::Binding::Bus (3pm)
- Handle to a well-known message bus instance
- Net::DBus::Binding::Introspector (3pm)
- Handler for object introspection data
- Net::DBus::Binding::Message::Error (3pm)
- a message encoding a method call e...
- Net::DBus::Binding::Message::MethodCall (3pm)
- a message encoding a method call
- Net::DBus::Binding::Message::MethodRe... (3pm)
- a message encoding a method ...
- Net::DBus::Binding::PendingCall (3pm)
- A handler for pending method replies
- Net::DBus::Binding::Watch (3pm)
- binding to the dbus watch API
- Net::DBus::Error (3pm)
- Error details for remote method invocation
- Net::DBus::Exporter (3pm)
- Export object methods and signals to the bus
- Net::DBus::Object (3pm)
- Provide objects to the bus for clients to use
- Net::DBus::RemoteObject (3pm)
- Access objects provided on the bus
- Net::DBus::RemoteService (3pm)
- Access services provided on the bus
- Net::DBus::Service (3pm)
- Provide a service to the bus for clients to use
- Net::DBus::Test::MockConnection (3pm)
- Fake a connection to the bus unit tes...
- Net::DBus::Test::MockMessage (3pm)
- Fake a message object when unit testing
- Net::DBus::Test::MockObject (3pm)
- Fake an object from the bus for unit testing
- Net::DBus::Tutorial (3pm)
- tutorials on the Perl DBus APIs
- Net::hostent (3)
- by-name interface to Perl's built-in gethost*() functions
- Net::Ident (3pm)
- lookup the username on the remote end of a TCP/IP conn...
- Net::LDAP (3pm)
- Lightweight Directory Access Protocol
- Net::LDAP::Constant (3pm)
- Constants for use with Net::LDAP
- Net::LDAP::Control::EntryChange (3pm)
- LDAPv3 Entry Change Notification cont...
- Net::LDAP::Control::MatchedValues (3pm)
- LDAPv3 MatchedValues Control
- Net::LDAP::Control::PersistentSearch (3pm)
- LDAPv3 Persistent Search control...
- Net::LDAP::Control::ProxyAuth (3pm)
- LDAPv3 Proxy Authorization control object
- Net::LDAP::Extension::Refresh (3pm)
- LDAPv3 Refresh extension object (RFC 2589)
- Net::LDAP::Extension::WhoAmI (3pm)
- LDAP "Who am I?" Operation
- Net::LDAP::Extra (3pm)
- - Load extra Net::LDAP methods
- Net::LDAP::FilterMatch (3pm)
- LDAP entry matching
- Net::LDAP::Reference (3pm)
- search reference
- Net::LDAP::Schema (3pm)
- Load and manipulate an LDAP v3 Schema
- Net::LDAP::Search (3pm)
- Object returned by Net::LDAP search method
- Net::LDAP::Security (3pm)
- Security issues with LDAP connections
- Net::Ping (3)
- check a remote host for reachability
- Net::Server::Thread (3)
- Net::Server personality
- Net::xAP (3pm)
- A base class for protocols such as IMAP, ACAP, IMSP, a...
- netatalk-config (1)
- script to get information about the installed version ...
- netdb.h (0p)
- definitions for network database operations
- netdev_all_upper_get_next_dev_rcu (9)
- Get the next dev from upper list
- netdev_boot_setup_check (9)
- check boot time settings
- netdev_cap_txqueue (9)
- check if selected tx queue exceeds device queues
- netdev_change_features (9)
- recalculate device features
- netdev_features_change (9)
- device changes features
- netdev_has_upper_dev (9)
- Check if device is linked to an upper device
- netdev_lower_get_first_private_rcu (9)
- Get the first - >private from the lo...
- netdev_lower_get_next (9)
- Get the next device from the lower neighbour list
- netdev_lower_get_next_private (9)
- Get the next - >private from the lower ne...
- netdev_lower_get_next_private_rcu (9)
- Get the next - >private from the lowe...
- netdev_master_upper_dev_link (9)
- Add a master link to the upper device
- netdev_reset_queue (9)
- reset the packets and bytes count of a network device
- netdev_rx_handler_register (9)
- register receive handler
- netdev_rx_handler_unregister (9)
- unregister receive handler
- netdev_sent_queue (9)
- report the number of bytes queued to hardware
- netdev_state_change (9)
- device changes state
- netdev_upper_dev_link (9)
- Add a link to the upper device
- netdev_upper_get_next_dev_rcu (9)
- Get the next dev from upper list
- nethack (6)
- Exploring The Mazes of Menace
- netif_device_attach (9)
- mark device as attached
- netif_device_detach (9)
- mark device as removed
- netif_is_multiqueue (9)
- test if device has multiple transmit queues
- netif_rx (9)
- post buffer to the network code
- netinet_in.h (0p)
- Internet address family
- netinet_tcp.h (0p)
- definitions for the Internet Transmission Control Prot...
- NetSNMP::agent (3)
- Perl extension for the net-snmp agent.
- NetSNMP::TrapReceiver (3)
- Embedded perl trap handling for Net-SNMP's snmptrapd
- newgrp (1p)
- change to a new group
- news2mail (8)
- Channel script to gateway news into e-mails
- newsfeeds (5)
- Determine where Usenet articles are sent
- newsgroups (5)
- List of newsgroups and their short descriptions
- newusers (8)
- update and create new users in batch
- next (n)
- invoke superclass method implementations
- nextto (n)
- invoke superclass method implementations
- nfs (5)
- fstab format and options for the nfs file systems
- nfsidmap (8)
- The NFS idmapper upcall program
- ngettext (1)
- translate message and choose plural form
- ngettext (3)
- translate message and choose plural form
- nginx (3)
- Perl interface to the nginx HTTP server API
- nginx (8)
- "HTTP and reverse proxy server, mail proxy server"
- nice (1)
- run a program with modified scheduling priority
- nice (1p)
- invoke a utility with an altered nice value
- nice (2)
- change process priority
- nice (3p)
- change the nice value of a process
- ninpaths (8)
- Report Usenet Path: statistics (new inpaths)
- nl_types.h (0p)
- data types
- nm (1p)
- write the name list of an object file (DEVELOPMENT)
- nm-online (1)
- ask NetworkManager whether the network is connected
- nnrpd.track (5)
- file to specify hosts to be tracked by nnrpd.
- nntp (n)
- Tcl client for the NNTP protocol
- node_map_pfn_alignment (9)
- determine the maximum internode alignment
- noecho (3ncurses)
- curses input options
- noecho_sp (3ncurses)
- curses screen-pointer extension
- nohup (1)
- run a command immune to hangups, with output to a non-tty
- nohup (1p)
- invoke a utility immune to hangups
- nologin (5)
- prevent unprivileged users from logging into the system
- nona (1)
- Stitch a panorama image
- nona_gui (1)
- Graphical interface for nona
- nop (1)
- pretty-print graph file
- noqiflush (3ncurses)
- curses input options
- noqiflush_sp (3ncurses)
- curses screen-pointer extension
- noseguy (6x)
- a little guy with a big nose wanders around being witty
- npm-access (1)
- Set access level on published packages
- npm-cache (1)
- Manipulates packages cache
- npm-config (1)
- Manage the npm configuration files
- npm-dedupe (1)
- Reduce duplication in the package tree
- npm-diff (1)
- The registry diff command
- npm-doctor (1)
- Check the health of your npm environment
- npm-find-dupes (1)
- Find duplication in the package tree
- npm-help (1)
- Get help on npm
- npm-help-search (1)
- Search npm help documentation
- npm-hook (1)
- Manage registry hooks
- npm-install-ci-test (1)
- Install a project with a clean slate and run tests
- npm-json (5)
- Specifics of npm's package.json handling
- npm-logout (1)
- Log out of the registry
- npm-outdated (1)
- Check for outdated packages
- npm-profile (1)
- Change settings on your registry profile
- npm-publish (1)
- Publish a package
- npm-repo (1)
- Open package repository page in the browser
- npm-search (1)
- Search for packages
- npm-shrinkwrap (1)
- Lock down dependency versions for publication
- npm-shrinkwrap-json (5)
- A publishable lockfile
- npm-team (1)
- Manage organization teams and team memberships
- npm-token (1)
- Manage your authentication tokens
- npm-unpublish (1)
- Remove a package from the registry
- npm-whoami (1)
- Display npm username
- npmrc (5)
- The npm config files
- nproc (1)
- print the number of processing units available
- nr_free_pagecache_pages (9)
- count number of pages beyond high watermark
- nr_free_zone_pages (9)
- count number of pages beyond high watermark
- nroff (1)
- emulate nroff command with groff
- nscd (8)
- name service cache daemon
- nscd_flush_cache (3)
- flush cache of Name Service Cache Daemon (nscd)
- nsec3hash (1)
- generate NSEC3 hash
- nsenter (1)
- run program with namespaces of other processes
- nss (5)
- Name Service Switch configuration file
- nss-myhostname (8)
- Provide hostname resolution for the locally configured...
- nsswitch.conf (5)
- Name Service Switch configuration file
- ntdbbackup (8)
- tool for backing up and for validating the integrity o...
- ntdbdump (8)
- tool for printing the contents of an NTDB file
- ntdbtool (8)
- manipulate the contents NTDB files
- ntfs-3g (8)
- Third Generation Read/Write NTFS Driver
- ntfscat (8)
- print NTFS files and streams on the standard output
- ntfscmp (8)
- compare two NTFS filesystems and tell the differences
- ntfsfix (8)
- fix common errors and force Windows to check NTFS
- ntfslabel (8)
- display/change the label on an ntfs file system
- ntfsprogs (8)
- tools for doing neat things with NTFS
- ntfsresize (8)
- resize an NTFS filesystem without data loss
- ntlm_auth (1)
- tool to allow external access to Winbind's NTLM authen...
- ntohl (3)
- convert values between host and network byte order
- ntohl (3p)
- convert values between host and network byte order
- ntohs (3)
- convert values between host and network byte order
- null (n)
- Null channel
- nullzero (n)
- Null/Zero channel combination
- numa (7)
- overview of Non-Uniform Memory Architecture
- numa_maps (5)
- overview of Non-Uniform Memory Architecture
- numactl (8)
- Control NUMA policy for processes or shared memory
- number (6)
- convert Arabic numerals to English
- numfmt (1)
- Convert numbers from/to human-readable strings
- strnvis (3bsd)
- visually encode characters
- oath_authenticate_usersfile (3)
- API function
- oath_base32_decode (3)
- API function
- oath_base32_encode (3)
- API function
- oath_bin2hex (3)
- API function
- oath_check_version (3)
- API function
- oath_done (3)
- API function
- oath_hex2bin (3)
- API function
- oath_hotp_generate (3)
- API function
- oath_hotp_validate (3)
- API function
- oath_hotp_validate_callback (3)
- API function
- oath_init (3)
- API function
- oath_strerror (3)
- API function
- oath_strerror_name (3)
- API function
- oath_totp_generate (3)
- API function
- oath_totp_generate2 (3)
- API function
- oath_totp_validate (3)
- API function
- oath_totp_validate2 (3)
- API function
- oath_totp_validate2_callback (3)
- API function
- oath_totp_validate3 (3)
- API function
- oath_totp_validate3_callback (3)
- API function
- oath_totp_validate4 (3)
- API function
- oath_totp_validate4_callback (3)
- API function
- oath_totp_validate_callback (3)
- API function
- oathtool (1)
- OATH one-time password tool
- oauth (3)
- (unknown subject)
- obabel (1)
- "a converter for chemistry and molecular modeling data...
- obchiral (1)
- "print molecular chirality information"
- obenergy (1)
- "calculate the energy for a molecule"
- obgrep (1)
- an advanced molecular search program using SMARTS
- OBJ_length (3osslssl-3)
- ASN1 object utility functions
- obminimize (1)
- "optimize the geometry, minimize the energy for a mole...
- obrotate (1)
- "batch-rotate dihedral angles matching SMARTS patterns"
- obxprop (1)
- A minimalistic, highly configurable, next generation w...
- OCSP_check_nonce (3osslssl-3)
- OCSP nonce functions
- OCSP_check_validity (3osslssl-3)
- OCSP response utility functions
- OCSP_parse_url (3osslssl-3)
- http utility functions
- OCSP_REQ_CTX_add1_header (3osslssl-3)
- OCSP responder query functions
- OCSP_RESPID_match (3osslssl-3)
- OCSP response functions
- OCSP_RESPID_match_ex (3osslssl-3)
- OCSP response functions
- OCSP_set_max_response_length (3osslssl-3)
- OCSP responder query functions
- od (1)
- dump files in octal and other formats
- of_mdio_find_bus (9)
- Given an mii_bus node, find the mii_bus.
- ofxdump (1)
- Dump content of OFX files as human-readable text
- oggenc (1)
- encode audio into the Ogg Vorbis format
- oidentd.conf (5)
- The oidentd configuration file.
- oldfind (1)
- search for files in a directory hierarchy
- oLschema2ldif (1)
- Converts LDAP schema's to LDB-compatible LDIF
- omshell (1)
- OMAPI Command Shell
- on_ac_power (1)
- test whether the computer is running on line power
- oo_object (n)
- root class of the class hierarchy
- Opcode (3)
- Disable named opcodes when compiling perl code
- open (n)
- Open a file-based or command pipeline channel
- open_by_handle (3)
- file handle operations
- open_by_handle_at (2)
- obtain handle for a pathname and open file via a handle
- openbox (1)
- A minimalistic, highly configurable, next generation w...
- openbox-session (1)
- Runs an Openbox session without any session manager.
- opendir (3p)
- open directory associated with file descriptor
- opendkim-gengraphs (8)
- OpenDKIM statistics graph generation tool
- opendmarc-check (8)
- DMARC record check tool
- opendmarc-expire (8)
- OpenDMARC history data expiration tool
- opendmarc-importstats (8)
- import OpenDMARC statistics/history data
- openjade (1)
- apply a DSSSL stylesheet to an SGML or XML document
- openlog (3)
- send messages to the system logger
- openlog (3p)
- open a connection to the logging facility
- openssl-ciphers (1osslssl-3)
- SSL cipher display and cipher list command
- openssl-core.h (7osslssl-3)
- OpenSSL Core types
- openssl-core_dispatch.h (7osslssl-3)
- OpenSSL provider dispatch numbers and ...
- openssl-core_names.h (7osslssl-3)
- OpenSSL provider parameter names
- openssl-dhparam (1osslssl-3)
- DH parameter manipulation and generation
- openssl-enc (1osslssl-3)
- symmetric cipher routines
- openssl-list (1osslssl-3)
- list algorithms and features
- openssl-mac (1osslssl-3)
- perform Message Authentication Code operations
- openssl-namedisplay-options (1osslssl-3)
- Distinguished name display options
- openssl-passphrase-options (1osslssl-3)
- Pass phrase options
- openssl-passwd (1osslssl-3)
- compute password hashes
- openssl-pkeyparam (1osslssl-3)
- public key algorithm parameter processing co...
- openssl-pkeyutl (1osslssl-3)
- public key algorithm command
- openssl-rehash (1osslssl-3)
- Create symbolic links to files named by the has...
- openssl-sess_id (1osslssl-3)
- SSL/TLS session handling command
- openssl-threads (7osslssl-3)
- Overview of thread safety in OpenSSL
- openssl-ts (1osslssl-3)
- Time Stamping Authority command
- OpenSSL_add_all_algorithms (3osslssl-3)
- add algorithms to internal table
- OpenSSL_add_all_ciphers (3osslssl-3)
- add algorithms to internal table
- OpenSSL_add_all_digests (3osslssl-3)
- add algorithms to internal table
- OpenSSL_add_ssl_algorithms (3osslssl-3)
- initialize SSL library by registeri...
- OPENSSL_buf2hexstr (3osslssl-3)
- Hex encoding and decoding functions
- OPENSSL_buf2hexstr_ex (3osslssl-3)
- Hex encoding and decoding functions
- OPENSSL_cipher_name (3osslssl-3)
- get SSL_CIPHER properties
- OPENSSL_fork_child (3osslssl-3)
- OpenSSL fork handlers
- OPENSSL_fork_parent (3osslssl-3)
- OpenSSL fork handlers
- OPENSSL_fork_prepare (3osslssl-3)
- OpenSSL fork handlers
- OPENSSL_hexchar2int (3osslssl-3)
- Hex encoding and decoding functions
- OPENSSL_hexstr2buf (3osslssl-3)
- Hex encoding and decoding functions
- OPENSSL_hexstr2buf_ex (3osslssl-3)
- Hex encoding and decoding functions
- OPENSSL_ia32cap (3osslssl-3)
- the x86[_64] processor capabilities vector
- OPENSSL_info (3osslssl-3)
- get OpenSSL version number and other information
- OPENSSL_LH_COMPFUNC (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_delete (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_doall (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_doall_arg (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_DOALL_FUNC (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_error (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_flush (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_free (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_get_down_load (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_HASHFUNC (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_insert (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_new (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_node_stats (3osslssl-3)
- LHASH statistics
- OPENSSL_LH_node_stats_bio (3osslssl-3)
- LHASH statistics
- OPENSSL_LH_node_usage_stats (3osslssl-3)
- LHASH statistics
- OPENSSL_LH_node_usage_stats_bio (3osslssl-3)
- LHASH statistics
- OPENSSL_LH_num_items (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_retrieve (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_set_down_load (3osslssl-3)
- dynamic hash table
- OPENSSL_LH_stats (3osslssl-3)
- LHASH statistics
- OPENSSL_LH_stats_bio (3osslssl-3)
- LHASH statistics
- OPENSSL_mem_debug_push (3osslssl-3)
- Memory allocation functions
- OPENSSL_MSTR_HELPER (3osslssl-3)
- generic C programming utility macros
- OPENSSL_s390xcap (3osslssl-3)
- the IBM z processor capabilities vector
- OPENSSL_secure_actual_size (3osslssl-3)
- secure heap storage
- OPENSSL_secure_clear_free (3osslssl-3)
- secure heap storage
- OPENSSL_secure_free (3osslssl-3)
- secure heap storage
- OPENSSL_secure_malloc (3osslssl-3)
- secure heap storage
- OPENSSL_secure_zalloc (3osslssl-3)
- secure heap storage
- OPENSSL_sk_push (3osslssl-3)
- stack container
- OPENSSL_sk_shift (3osslssl-3)
- stack container
- OPENSSL_sk_unshift (3osslssl-3)
- stack container
- OPENSSL_thread_stop (3osslssl-3)
- OpenSSL initialisation and deinitialisatio...
- OPENSSL_thread_stop_ex (3osslssl-3)
- OpenSSL initialisation and deinitialisa...
- OpenSSL_version (3osslssl-3)
- get OpenSSL version number and other information
- OpenSSL_version_num (3osslssl-3)
- get OpenSSL version number and other infor...
- OPENSSL_VERSION_NUMBER (3osslssl-3)
- get OpenSSL version number and other in...
- OPENSSL_VERSION_PREREQ (3osslssl-3)
- get OpenSSL version number and other in...
- OPENSSL_VERSION_TEXT (3osslssl-3)
- get OpenSSL version number and other info...
- opieftpd (8)
- File Transfer Protocol server that uses OPIE authentic...
- opieinfo (1)
- Extract sequence number and seed for future OPIE chall...
- opiekey (1)
- Programs for computing responses to OTP challenges.
- opielogin (1)
- Replacement for login(1) that issues OPIE challenges.
- opiepasswd (1)
- Change or set a user's password for the OPIE authentic...
- opiesu (1)
- Replacement su(1) program that uses OPIE challenges
- ops (3)
- Perl pragma to restrict unsafe operations when compiling
- option (n)
- Add/retrieve window options to/from the option database
- optionFileLoad (3)
- Load the locatable config files, in order
- optionFindNextValue (3)
- find a hierarcicaly valued option instance
- optionFindValue (3)
- find a hierarcicaly valued option instance
- optionGetValue (3)
- get a specific value from a hierarcical list
- optionMemberList (3)
- Get the list of members of a bit mask set
- optionNextValue (3)
- get the next value from a hierarchical list
- optionOnlyUsage (3)
- Print usage text for just the options
- optionProcess (3)
- this is the main option processing routine
- optionSaveFile (3)
- saves the option state to a file
- optionSaveState (3)
- saves the option state to memory
- optionUnloadNested (3)
- Deallocate the memory for a nested value
- optionVersion (3)
- return the compiled AutoOpts version number
- orage (1)
- Calendar for the Xfce Desktop Environment
- orbd-java-1.7.0-openjdk (1)
- The Object Request Broker Daemon
- ordchr (3am)
- convert characters to strings and vice versa
- orgs (7)
- Working with Teams & Orgs
- osage (1)
- filter for drawing clustered graphs
- osinfo-detect (1)
- Detect the operating system on installable media or trees
- osinfo-query (1)
- Query information in the database
- ospeed (3ncurses)
- direct curses interface to the terminfo capability dat...
- ospf6d (8)
- an OSPFv3 routing engine for use with Quagga routing s...
- ospfd (8)
- an OSPFv2 routing engine for use with Quagga routing s...
- OSSL_ALGORITHM (3osslssl-3)
- OpenSSL Core type to define a fetchable algorithm
- OSSL_CMP_certConf_cb (3osslssl-3)
- functions for managing the CMP client con...
- OSSL_CMP_certConf_cb_t (3osslssl-3)
- functions for managing the CMP client c...
- OSSL_CMP_CTX_build_cert_chain (3osslssl-3)
- functions for managing the CMP c...
- OSSL_CMP_CTX_free (3osslssl-3)
- functions for managing the CMP client contex...
- OSSL_CMP_CTX_get0_newCert (3osslssl-3)
- functions for managing the CMP clien...
- OSSL_CMP_CTX_get0_newPkey (3osslssl-3)
- functions for managing the CMP clien...
- OSSL_CMP_CTX_get0_statusString (3osslssl-3)
- functions for managing the CMP ...
- OSSL_CMP_CTX_get0_trustedStore (3osslssl-3)
- functions for managing the CMP ...
- OSSL_CMP_CTX_get0_untrusted (3osslssl-3)
- functions for managing the CMP cli...
- OSSL_CMP_CTX_get1_caPubs (3osslssl-3)
- functions for managing the CMP client...
- OSSL_CMP_CTX_get1_extraCertsIn (3osslssl-3)
- functions for managing the CMP ...
- OSSL_CMP_CTX_get1_newChain (3osslssl-3)
- functions for managing the CMP clie...
- OSSL_CMP_CTX_get_certConf_cb_arg (3osslssl-3)
- functions for managing the CM...
- OSSL_CMP_CTX_get_failInfoCode (3osslssl-3)
- functions for managing the CMP c...
- OSSL_CMP_CTX_get_http_cb_arg (3osslssl-3)
- functions for managing the CMP cl...
- OSSL_CMP_CTX_get_option (3osslssl-3)
- functions for managing the CMP client ...
- OSSL_CMP_CTX_get_status (3osslssl-3)
- functions for managing the CMP client ...
- OSSL_CMP_CTX_get_transfer_cb_arg (3osslssl-3)
- functions for managing the CM...
- OSSL_CMP_CTX_new (3osslssl-3)
- functions for managing the CMP client context...
- OSSL_CMP_CTX_print_errors (3osslssl-3)
- functions for managing the CMP clien...
- OSSL_CMP_CTX_push0_geninfo_ITAV (3osslssl-3)
- functions for managing the CMP...
- OSSL_CMP_CTX_push0_genm_ITAV (3osslssl-3)
- functions for managing the CMP cl...
- OSSL_CMP_CTX_push0_policy (3osslssl-3)
- functions for managing the CMP clien...
- OSSL_CMP_CTX_push1_subjectAltName (3osslssl-3)
- functions for managing the C...
- OSSL_CMP_CTX_reinit (3osslssl-3)
- functions for managing the CMP client cont...
- OSSL_CMP_CTX_reqExtensions_have_SAN (3osslssl-3)
- functions for managing the...
- OSSL_CMP_CTX_reset_geninfo_ITAVs (3osslssl-3)
- functions for managing the CM...
- OSSL_CMP_CTX_set0_newPkey (3osslssl-3)
- functions for managing the CMP clien...
- OSSL_CMP_CTX_set0_reqExtensions (3osslssl-3)
- functions for managing the CMP...
- OSSL_CMP_CTX_set0_trustedStore (3osslssl-3)
- functions for managing the CMP ...
- OSSL_CMP_CTX_set1_cert (3osslssl-3)
- functions for managing the CMP client c...
- OSSL_CMP_CTX_set1_expected_sender (3osslssl-3)
- functions for managing the C...
- OSSL_CMP_CTX_set1_extraCertsOut (3osslssl-3)
- functions for managing the CMP...
- OSSL_CMP_CTX_set1_issuer (3osslssl-3)
- functions for managing the CMP client...
- OSSL_CMP_CTX_set1_no_proxy (3osslssl-3)
- functions for managing the CMP clie...
- OSSL_CMP_CTX_set1_oldCert (3osslssl-3)
- functions for managing the CMP clien...
- OSSL_CMP_CTX_set1_p10CSR (3osslssl-3)
- functions for managing the CMP client...
- OSSL_CMP_CTX_set1_pkey (3osslssl-3)
- functions for managing the CMP client c...
- OSSL_CMP_CTX_set1_proxy (3osslssl-3)
- functions for managing the CMP client ...
- OSSL_CMP_CTX_set1_recipient (3osslssl-3)
- functions for managing the CMP cli...
- OSSL_CMP_CTX_set1_referenceValue (3osslssl-3)
- functions for managing the CM...
- OSSL_CMP_CTX_set1_secretValue (3osslssl-3)
- functions for managing the CMP c...
- OSSL_CMP_CTX_set1_senderNonce (3osslssl-3)
- functions for managing the CMP c...
- OSSL_CMP_CTX_set1_server (3osslssl-3)
- functions for managing the CMP client...
- OSSL_CMP_CTX_set1_serverPath (3osslssl-3)
- functions for managing the CMP cl...
- OSSL_CMP_CTX_set1_srvCert (3osslssl-3)
- functions for managing the CMP clien...
- OSSL_CMP_CTX_set1_subjectName (3osslssl-3)
- functions for managing the CMP c...
- OSSL_CMP_CTX_set1_transactionID (3osslssl-3)
- functions for managing the CMP...
- OSSL_CMP_CTX_set1_untrusted (3osslssl-3)
- functions for managing the CMP cli...
- OSSL_CMP_CTX_set_certConf_cb (3osslssl-3)
- functions for managing the CMP cl...
- OSSL_CMP_CTX_set_certConf_cb_arg (3osslssl-3)
- functions for managing the CM...
- OSSL_CMP_CTX_set_http_cb (3osslssl-3)
- functions for managing the CMP client...
- OSSL_CMP_CTX_set_http_cb_arg (3osslssl-3)
- functions for managing the CMP cl...
- OSSL_CMP_CTX_set_log_cb (3osslssl-3)
- functions for managing the CMP client ...
- OSSL_CMP_CTX_set_log_verbosity (3osslssl-3)
- functions for managing the CMP ...
- OSSL_CMP_CTX_set_option (3osslssl-3)
- functions for managing the CMP client ...
- OSSL_CMP_CTX_set_serverPort (3osslssl-3)
- functions for managing the CMP cli...
- OSSL_CMP_CTX_set_transfer_cb (3osslssl-3)
- functions for managing the CMP cl...
- OSSL_CMP_CTX_set_transfer_cb_arg (3osslssl-3)
- functions for managing the CM...
- OSSL_CMP_CTX_snprint_PKIStatus (3osslssl-3)
- function(s) for managing the CM...
- OSSL_CMP_HDR_get0_recipNonce (3osslssl-3)
- functions manipulating CMP messag...
- OSSL_CMP_HDR_get0_transactionID (3osslssl-3)
- functions manipulating CMP mes...
- OSSL_CMP_ITAV_push0_stack_item (3osslssl-3)
- OSSL_CMP_ITAV utility functions
- OSSL_CMP_MSG_get0_header (3osslssl-3)
- function(s) manipulating CMP messages
- OSSL_CMP_MSG_http_perform (3osslssl-3)
- client-side HTTP(S) transfer of a CM...
- OSSL_CMP_PKIHEADER_free (3osslssl-3)
- ASN1 object utilities
- OSSL_CMP_PKIHEADER_it (3osslssl-3)
- ASN1 object utilities
- OSSL_CMP_PKIHEADER_new (3osslssl-3)
- ASN1 object utilities
- OSSL_CMP_snprint_PKIStatusInfo (3osslssl-3)
- function(s) for managing the CM...
- OSSL_CMP_STATUSINFO_new (3osslssl-3)
- function(s) for managing the CMP PKISt...
- OSSL_CMP_transfer_cb_t (3osslssl-3)
- functions for managing the CMP client c...
- OSSL_CMP_validate_cert_path (3osslssl-3)
- functions for verifying CMP messag...
- OSSL_CRMF_MSG_get0_regCtrl_authenticator (3osslssl-3)
- functions getting or ...
- OSSL_CRMF_MSG_PKIPublicationInfo_push... (3osslssl-3)
- functions getting or ...
- OSSL_CRMF_MSG_push0_extension (3osslssl-3)
- functions populating and verifyi...
- OSSL_CRMF_MSG_set1_regCtrl_authenticator (3osslssl-3)
- functions getting or ...
- OSSL_DECODER (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_CTX_set_passphrase (3osslssl-3)
- Decoder routines to decode EVP...
- OSSL_DECODER_CTX_set_passphrase_cb (3osslssl-3)
- Decoder routines to decode ...
- OSSL_DECODER_CTX_set_passphrase_ui (3osslssl-3)
- Decoder routines to decode ...
- OSSL_DECODER_do_all_provided (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_fetch (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_free (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_get0_description (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_get0_name (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_get0_properties (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_get0_provider (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_get_params (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_gettable_params (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_is_a (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_names_do_all (3osslssl-3)
- Decoder method routines
- OSSL_DECODER_up_ref (3osslssl-3)
- Decoder method routines
- OSSL_default_cipher_list (3osslssl-3)
- choose list of available SSL_CIPHERs
- OSSL_default_ciphersuites (3osslssl-3)
- choose list of available SSL_CIPHERs
- OSSL_DISPATCH (3osslssl-3)
- OpenSSL Core type to define a dispatchable funct...
- OSSL_ENCODER (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_CTX_set_cipher (3osslssl-3)
- Encoder routines to encode EVP_PKEYs
- OSSL_ENCODER_CTX_set_passphrase (3osslssl-3)
- Encoder routines to encode EVP...
- OSSL_ENCODER_CTX_set_passphrase_cb (3osslssl-3)
- Encoder routines to encode ...
- OSSL_ENCODER_CTX_set_passphrase_ui (3osslssl-3)
- Encoder routines to encode ...
- OSSL_ENCODER_do_all_provided (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_fetch (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_free (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_get0_description (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_get0_name (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_get0_properties (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_get0_provider (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_get_params (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_gettable_params (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_is_a (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_names_do_all (3osslssl-3)
- Encoder method routines
- OSSL_ENCODER_up_ref (3osslssl-3)
- Encoder method routines
- OSSL_ESS_check_signing_certs (3osslssl-3)
- Enhanced Security Services (ESS) ...
- OSSL_ESS_signing_cert_new_init (3osslssl-3)
- Enhanced Security Services (ESS...
- OSSL_ESS_signing_cert_v2_new_init (3osslssl-3)
- Enhanced Security Services (...
- OSSL_HTTP_adapt_proxy (3osslssl-3)
- http utility functions
- OSSL_HTTP_bio_cb_t (3osslssl-3)
- HTTP client high-level functions
- OSSL_HTTP_close (3osslssl-3)
- HTTP client high-level functions
- OSSL_HTTP_exchange (3osslssl-3)
- HTTP client high-level functions
- OSSL_HTTP_get (3osslssl-3)
- HTTP client high-level functions
- OSSL_HTTP_is_alive (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_open (3osslssl-3)
- HTTP client high-level functions
- OSSL_HTTP_parse_url (3osslssl-3)
- http utility functions
- OSSL_HTTP_proxy_connect (3osslssl-3)
- HTTP client high-level functions
- OSSL_HTTP_REQ_CTX (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_add1_header (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_exchange (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_free (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_get0_mem_bio (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_get_resp_len (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_nbio (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_nbio_d2i (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_new (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_set1_req (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_set_expected (3osslssl-3)
- HTTP client low-level functions
- OSSL_HTTP_REQ_CTX_set_max_response_le... (3osslssl-3)
- HTTP client low-level...
- OSSL_HTTP_REQ_CTX_set_request_line (3osslssl-3)
- HTTP client low-level funct...
- OSSL_HTTP_set1_request (3osslssl-3)
- HTTP client high-level functions
- OSSL_HTTP_transfer (3osslssl-3)
- HTTP client high-level functions
- OSSL_LIB_CTX_new_child (3osslssl-3)
- OpenSSL library context
- OSSL_LIB_CTX_new_from_dispatch (3osslssl-3)
- OpenSSL library context
- OSSL_PARAM_BLD (3osslssl-3)
- functions to assist in the creation of OSSL_PAR...
- OSSL_PARAM_BLD_free (3osslssl-3)
- functions to assist in the creation of OSS...
- OSSL_PARAM_BLD_new (3osslssl-3)
- functions to assist in the creation of OSSL...
- OSSL_PARAM_BLD_push_BN (3osslssl-3)
- functions to assist in the creation of ...
- OSSL_PARAM_BLD_push_BN_pad (3osslssl-3)
- functions to assist in the creation...
- OSSL_PARAM_BLD_push_double (3osslssl-3)
- functions to assist in the creation...
- OSSL_PARAM_BLD_push_int (3osslssl-3)
- functions to assist in the creation of...
- OSSL_PARAM_BLD_push_int32 (3osslssl-3)
- functions to assist in the creation ...
- OSSL_PARAM_BLD_push_int64 (3osslssl-3)
- functions to assist in the creation ...
- OSSL_PARAM_BLD_push_long (3osslssl-3)
- functions to assist in the creation o...
- OSSL_PARAM_BLD_push_octet_ptr (3osslssl-3)
- functions to assist in the creat...
- OSSL_PARAM_BLD_push_octet_string (3osslssl-3)
- functions to assist in the cr...
- OSSL_PARAM_BLD_push_size_t (3osslssl-3)
- functions to assist in the creation...
- OSSL_PARAM_BLD_push_time_t (3osslssl-3)
- functions to assist in the creation...
- OSSL_PARAM_BLD_push_uint (3osslssl-3)
- functions to assist in the creation o...
- OSSL_PARAM_BLD_push_uint32 (3osslssl-3)
- functions to assist in the creation...
- OSSL_PARAM_BLD_push_uint64 (3osslssl-3)
- functions to assist in the creation...
- OSSL_PARAM_BLD_push_ulong (3osslssl-3)
- functions to assist in the creation ...
- OSSL_PARAM_BLD_push_utf8_ptr (3osslssl-3)
- functions to assist in the creati...
- OSSL_PARAM_BLD_push_utf8_string (3osslssl-3)
- functions to assist in the cre...
- OSSL_PARAM_BLD_to_param (3osslssl-3)
- functions to assist in the creation of...
- OSSL_PARAM_BN (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_BN (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_double (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_end (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_int (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_int32 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_int64 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_long (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_octet_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_octet_string (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_size_t (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_time_t (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_uint (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_uint32 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_uint64 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_ulong (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_utf8_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_construct_utf8_string (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_DEFN (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_double (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_END (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_BN (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_double (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_int (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_int32 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_int64 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_long (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_octet_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_octet_string (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_octet_string_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_size_t (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_time_t (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_uint (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_uint32 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_uint64 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_ulong (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_utf8_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_utf8_string (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_get_utf8_string_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_int (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_int32 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_int64 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_locate (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_locate_const (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_long (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_modified (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_octet_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_octet_string (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_all_unmodified (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_BN (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_double (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_int (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_int32 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_int64 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_long (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_octet_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_octet_string (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_size_t (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_time_t (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_uint (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_uint32 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_uint64 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_ulong (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_utf8_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_set_utf8_string (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_size_t (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_time_t (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_uint (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_uint32 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_uint64 (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_ulong (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_UNMODIFIED (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_utf8_ptr (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_PARAM_utf8_string (3osslssl-3)
- OSSL_PARAM helpers
- OSSL_parse_url (3osslssl-3)
- http utility functions
- OSSL_PASSPHRASE_CALLBACK (3osslssl-3)
- OpenSSL Core type to define callbacks
- OSSL_PROVIDER_get0_dispatch (3osslssl-3)
- provider routines
- OSSL_PROVIDER_set_default_search_path (3osslssl-3)
- provider routines
- ossl_store-file (7osslssl-3)
- The store 'file' scheme loader
- OSSL_STORE_attach (3osslssl-3)
- Functions to read objects from a BIO
- OSSL_STORE_attach_fn (3osslssl-3)
- Types and functions to manipulate, regist...
- OSSL_STORE_expect (3osslssl-3)
- Specify what object type is expected
- OSSL_STORE_find (3osslssl-3)
- Specify what object type is expected
- OSSL_STORE_LOADER_fetch (3osslssl-3)
- Types and functions to manipulate, reg...
- OSSL_STORE_LOADER_get0_scheme (3osslssl-3)
- Types and functions to manipulat...
- OSSL_STORE_LOADER_set_attach (3osslssl-3)
- Types and functions to manipulate...
- OSSL_STORE_SEARCH (3osslssl-3)
- Type and functions to create OSSL_STORE sear...
- OSSL_STORE_SEARCH_by_alias (3osslssl-3)
- Type and functions to create OSSL_S...
- OSSL_STORE_SEARCH_by_issuer_serial (3osslssl-3)
- Type and functions to creat...
- OSSL_STORE_SEARCH_by_key_fingerprint (3osslssl-3)
- Type and functions to cre...
- OSSL_STORE_SEARCH_by_name (3osslssl-3)
- Type and functions to create OSSL_ST...
- OSSL_STORE_SEARCH_free (3osslssl-3)
- Type and functions to create OSSL_STORE...
- OSSL_STORE_SEARCH_get0_bytes (3osslssl-3)
- Type and functions to create OSSL...
- OSSL_STORE_SEARCH_get0_digest (3osslssl-3)
- Type and functions to create OSS...
- OSSL_STORE_SEARCH_get0_name (3osslssl-3)
- Type and functions to create OSSL_...
- OSSL_STORE_SEARCH_get0_serial (3osslssl-3)
- Type and functions to create OSS...
- OSSL_STORE_SEARCH_get0_string (3osslssl-3)
- Type and functions to create OSS...
- OSSL_STORE_SEARCH_get_type (3osslssl-3)
- Type and functions to create OSSL_S...
- OSSL_STORE_supports_search (3osslssl-3)
- Specify what object type is expected
- OSSL_trace_set_channel (3osslssl-3)
- Enabling trace output
- OTHERNAME_free (3osslssl-3)
- ASN1 object utilities
- OTHERNAME_new (3osslssl-3)
- ASN1 object utilities
- otp-md4 (1)
- Programs for computing responses to OTP challenges.
- otp-md5 (1)
- Programs for computing responses to OTP challenges.
- ovdb (5)
- Overview storage method for INN
- ovdb_server (8)
- overview 'helper' server
- ovdb_stat (8)
- Display information from the ovdb database
- overchan (8)
- Batch update the INN overview database
- ownership (8)
- Compaq ownership tag retriever
- pack (n)
- Geometry manager that packs around edges of cavity
- package-json (5)
- Specifics of npm's package.json handling
- package-lock-json (5)
- A manifestation of the manifest
- package-stash-conflicts (1)
- (unknown subject)
- Package::Stash::Conflicts (3pm)
- Provide information on conflicts for Packag...
- page_cache_async_readahead (9)
- file readahead for marked pages
- page_cache_next_hole (9)
- find the next hole (not-present entry)
- page_cache_prev_hole (9)
- find the prev hole (not-present entry)
- page_cache_sync_readahead (9)
- generic file readahead
- page_util_quote (n)
- page character quoting utilities
- pagecache_get_page (9)
- find and get a page reference
- pahole (1)
- Shows, manipulates data structure layout and pretty pr...
- PAIR_NUMBER (3ncurses)
- curses character and window attribute control routines
- pam (3)
- Pluggable Authentication Modules Library
- pam (8)
- Pluggable Authentication Modules for Linux
- pam_authenticate (3)
- account authentication
- pam_chauthtok (3)
- updating authentication tokens
- pam_ck_connector (8)
- Register session with ConsoleKit
- pam_cracklib (8)
- PAM module to check the password against dictionary words
- pam_debug (8)
- PAM module to debug the PAM stack
- pam_deny (8)
- The locking-out PAM module
- pam_echo (8)
- PAM module for printing text messages
- pam_env.conf (5)
- the environment variables config file
- pam_error (3)
- display error messages to the user
- pam_exec (8)
- PAM module which calls an external command
- pam_faildelay (8)
- Change the delay on failure per-application
- pam_get_authtok (3)
- get authentication token
- pam_get_authtok_noverify (3)
- get authentication token
- pam_get_authtok_verify (3)
- get authentication token
- pam_getenvlist (3)
- getting the PAM environment
- pam_info (3)
- display messages to the user
- pam_ldap (5)
- LDAP pluggable authentication module
- pam_loginuid (8)
- Record user's login uid to the process attribute
- pam_misc_paste_env (3)
- transcribing an environment to that of PAM
- pam_mkhomedir (8)
- PAM module to create users home directory
- pam_motd (8)
- Display the motd file
- pam_mount (8)
- A PAM module that can mount volumes for a user session
- pam_mount.conf (5)
- Description of the pam_mount configuration file
- pam_permit (8)
- The promiscuous module
- pam_putenv (3)
- set or change PAM environment variable
- pam_pwcheck (8)
- PAM module for password strength checking
- pam_pwhistory (8)
- PAM module to remember last passwords
- pam_rhosts (8)
- The rhosts PAM module
- pam_selinux (8)
- PAM module to set the default security context
- pam_setcred (3)
- establish / delete user credentials
- pam_shells (8)
- PAM module to check for valid login shell
- pam_sm_authenticate (3)
- PAM service function for user authentication
- pam_sm_chauthtok (3)
- PAM service function for authentication token management
- pam_succeed_if (8)
- test account characteristics
- pam_syslog (3)
- send messages to the system logger
- pam_systemd (8)
- Register user sessions in the systemd login manager
- pam_tally2 (8)
- The login counter (tallying) module
- pam_timestamp (8)
- Authenticate using cached successful authentication at...
- pam_timestamp_check (8)
- Check to see if the default timestamp is valid
- pam_umask (8)
- PAM module to set the file mode creation mask
- pam_unix (8)
- Module for traditional password authentication
- pam_unix2 (8)
- Standard PAM module for traditional password authentic...
- pam_verror (3)
- display error messages to the user
- pam_vinfo (3)
- display messages to the user
- pam_vsyslog (3)
- send messages to the system logger
- pam_warn (8)
- PAM module which logs all PAM items if called
- pam_wheel (8)
- Only permit root access to members of group wheel
- pam_xauth (8)
- PAM module to forward xauth keys between users
- pam_xauth_data (3)
- structure containing X authentication data
- pamarith (1)
- perform arithmetic on two Netpbm images
- pambackground (1)
- create a mask of the background area of an image
- pamchannel (1)
- extract channels from a PAM image
- pamcomp (1)
- composite (overlay) two Netpbm images together
- pamdeinterlace (1)
- remove every other row from a PAM/PNM image
- pamdepth (1)
- change the maxval in a Netpbm image
- pamdice (1)
- slice a Netpbm image into many horizontally and/or ver...
- pamditherbw (1)
- dither grayscale image to black and white
- pamexec (1)
- Execute a shell command on each image in a Netpbm imag...
- pamfixtrunc (1)
- repair a Netpbm image whose file is truncated
- pamfunc (1)
- Apply a simple monadic arithmetic function to a Netpbm...
- pammasksharpen (1)
- Sharpen an image via an unsharp mask
- pampop9 (1)
- simulate a multi-lens camera such as the Pop9
- pamrecolor (1)
- alter colors without affecting luminance
- pamrubber (1)
- a rubber-sheeting utility that stretches an image base...
- pamsharpmap (1)
- create map of sharpness in a PNM/PAM image
- pamsharpness (1)
- measure the sharpness of a PNM/PAM image
- pamsistoaglyph (1)
- convert a single-image stereogram to a red/cyan anagly...
- pamstereogram (1)
- create a single-image stereogram from a PAM depth map
- pamstretch (1)
- scale up a PNM or PAM image by interpolating between p...
- pamstretch-gen (1)
- use pamstretch and pamscale to scale by non-integer va...
- pamsumm (1)
- Summarize the samples in a Netpbm image arithmetically
- pamthreshold (1)
- threshold grayscale image to black and white
- pamtilt (1)
- print the tilt angle of a PGM file
- pamtohdiff (1)
- convert PAM image to horizontal difference image
- pamtohtmltbl (1)
- convert pnm/pam visual image to an HTML table
- pamtosvg (1)
- convert a Netpbm image to a SVG (Scalable Vector Graph...
- pamtouil (1)
- convert a PNM or PNM/alpha image into a Motif UIL icon...
- pamtoxvmini (1)
- convert Netpbm image to an XV 'thumbnail' picture
- pamwipeout (1)
- replace detail with smooth gradient from one edge to t...
- panel_hidden (3curses)
- panel stack extension for curses
- panic (9)
- halt the system
- panic_nand_get_device (9)
- [GENERIC] Get chip for selected access
- panic_nand_wait (9)
- [GENERIC] wait until the command is done
- panic_nand_wait_ready (9)
- [GENERIC] Wait for the ready pin after commands.
- panic_nand_write (9)
- [MTD Interface] NAND write with ECC
- pano_modify (1)
- Change output parameters of project file
- Params::Check (3)
- A generic input parsing/checking mechanism.
- parent (3)
- Establish an ISA relationship with base classes at com...
- parent_len (9)
- find the length of the parent portion of a pathname
- parport_close (9)
- close a device opened with parport_open
- parport_set_timeout (9)
- set the inactivity timeout for a device
- parport_wait_peripheral (9)
- wait for status lines to change in 35ms
- parport_yield (9)
- relinquish a parallel port temporarily
- parport_yield_blocking (9)
- relinquish a parallel port temporarily
- part_round_stats (9)
- Round off the performance stats on a struct disk_stats.
- partprobe (8)
- inform the OS of partition table changes
- partx (8)
- tell the Linux kernel about the presence and numbering...
- passmass (1)
- change password on multiple machines
- passphrase-encoding (7osslssl-3)
- How diverse parts of OpenSSL treat pass ph...
- passwd (1)
- change user password
- patch (1)
- apply a diff file to an original
- patch (1p)
- apply changes to files
- patch-metamail (1)
- Install a patch to the latest metamail release
- patchelf (1)
- Modify ELF files
- patchwork (1)
- filter for drawing clustered graphs as treemaps
- patgen (1)
- generate patterns for TeX hyphenation
- path_get (9)
- get a reference to a path
- path_put (9)
- put a reference to a path
- path_resolution (7)
- how a pathname is resolved to a file
- path_to_fshandle (3)
- file handle operations
- path_to_handle (3)
- file handle operations
- pathchk (1)
- check whether file names are valid or portable
- pathchk (1p)
- check pathnames
- pathconf (3)
- get configuration values for files
- pathconf (3p)
- get configurable pathname variables
- pause (3p)
- suspend the thread until a signal is received
- pax (1)
- read and write file archives and copy directory hierar...
- pax (1p)
- portable archive interchange
- pax11publish (1)
- PulseAudio X11 Credential Utility
- pbmpscale (1)
- enlarge a PBM image with edge smoothing
- pbmto10x (1)
- convert a PBM image into Gemini 10X printer graphics
- pbmtoascii (1)
- convert a PBM image to ASCII graphics
- pbmtobbnbg (1)
- convert a PBM image into BitGraph graphics
- pbmtoepson (1)
- convert a PBM image into Epson printer graphics
- pbmtog3 (1)
- convert a PBM image into a Group 3 MH fax file
- pbmtogo (1)
- convert a PBM image into compressed GraphOn graphics
- pbmtolj (1)
- convert a PBM image to HP LaserJet format
- pbmtoppa (1)
- convert PBM image to HP Printer Performance Architectu...
- pbmtopsg3 (1)
- convert PBM images to Postscript with G3 fax compression
- pbmtoptx (1)
- convert a PBM image into Printronix printer graphics
- pbuildid (1)
- print the build id of an ELF executable or core file
- PC (3ncurses)
- direct curses interface to the terminfo capability dat...
- pcap-linktype (7)
- link-layer header types supported by libpcap
- pcap_activate (3pcap)
- activate a capture handle
- pcap_breakloop (3pcap)
- force a pcap_dispatch() or pcap_loop() call to return
- pcap_can_set_rfmon (3pcap)
- check whether monitor mode can be set for a not-...
- pcap_create (3pcap)
- create a live capture handle
- pcap_datalink (3pcap)
- get the link-layer header type
- pcap_datalink_name_to_val (3pcap)
- get the link-layer header type value corr...
- pcap_dispatch (3pcap)
- process packets from a live capture or savefile
- pcap_dump_file (3pcap)
- get the standard I/O stream for a savefile being wri...
- pcap_dump_flush (3pcap)
- flush to a savefile packets dumped
- pcap_dump_fopen (3pcap)
- open a file to which to write packets
- pcap_dump_ftell (3pcap)
- get the current file offset for a savefile being wr...
- pcap_dump_open (3pcap)
- open a file to which to write packets
- pcap_file (3pcap)
- get the standard I/O stream for a savefile being read
- pcap_fileno (3pcap)
- get the file descriptor for a live capture
- pcap_findalldevs (3pcap)
- get a list of capture devices, and free that list
- pcap_fopen_offline_with_tstamp_precision (3pcap)
- open a saved capture file ...
- pcap_free_datalinks (3pcap)
- get a list of link-layer header types supported...
- pcap_freealldevs (3pcap)
- get a list of capture devices, and free that list
- pcap_get_required_select_timeout (3pcap)
- get a timeout to be used when doin...
- pcap_get_selectable_fd (3pcap)
- get a file descriptor on which a select() ca...
- pcap_get_tstamp_precision (3pcap)
- get the time stamp precision returned in ...
- pcap_getnonblock (3pcap)
- set or get the state of non-blocking mode on a cap...
- pcap_init (3pcap)
- initialize the library
- pcap_is_swapped (3pcap)
- find out whether a savefile has the native byte order
- pcap_lib_version (3pcap)
- get the version information for libpcap
- pcap_list_datalinks (3pcap)
- get a list of link-layer header types supported...
- pcap_lookupdev (3pcap)
- find the default device on which to capture
- pcap_lookupnet (3pcap)
- find the IPv4 network number and netmask for a device
- pcap_major_version (3pcap)
- get the version number of a savefile
- pcap_minor_version (3pcap)
- get the version number of a savefile
- pcap_next (3pcap)
- read the next packet from a pcap_t
- pcap_next_ex (3pcap)
- read the next packet from a pcap_t
- pcap_offline_filter (3pcap)
- check whether a filter matches a packet
- pcap_open_dead_with_tstamp_precision (3pcap)
- open a fake pcap_t for compili...
- pcap_open_offline_with_tstamp_precision (3pcap)
- open a saved capture file f...
- pcap_set_buffer_size (3pcap)
- set the buffer size for a not-yet-activated ca...
- pcap_set_datalink (3pcap)
- set the link-layer header type to be used by a ca...
- pcap_set_rfmon (3pcap)
- set monitor mode for a not-yet-activated capture handle
- pcap_set_snaplen (3pcap)
- set the snapshot length for a not-yet-activated ca...
- pcap_set_timeout (3pcap)
- set the packet buffer timeout for a not-yet-activa...
- pcap_set_tstamp_precision (3pcap)
- set the time stamp precision returned in ...
- pcap_set_tstamp_type (3pcap)
- set the time stamp type to be used by a captur...
- pcap_setdirection (3pcap)
- set the direction for which packets will be captured
- pcap_setfilter (3pcap)
- set the filter
- pcap_setnonblock (3pcap)
- set or get the state of non-blocking mode on a cap...
- pcap_snapshot (3pcap)
- get the snapshot length
- pcap_tstamp_type_name_to_val (3pcap)
- get the time stamp type value correspo...
- pcdovtoppm (1)
- create index image for a photo CD
- pci_add_dynid (9)
- add a new PCI device ID to this driver and re-probe de...
- pci_bus_max_busnr (9)
- returns maximum PCI bus number of given bus' children
- pci_check_and_mask_intx (9)
- mask INTx on pending interrupt
- pci_check_and_unmask_intx (9)
- unmask INTx if no interrupt is pending
- pci_choose_state (9)
- Choose the power state of a PCI device
- pci_create_slot (9)
- create or increment refcount for physical PCI slot
- pci_destroy_slot (9)
- decrement refcount for physical PCI slot
- pci_dev_driver (9)
- get the pci_driver of a device
- pci_dev_get (9)
- increments the reference count of the pci device struc...
- pci_dev_present (9)
- Returns 1 if device matching the device list is presen...
- pci_dev_put (9)
- release a use of the pci device structure
- pci_dev_run_wake (9)
- Check if device can generate run-time wake-up events.
- pci_disable_sriov (9)
- disable the SR-IOV capability
- pci_enable_device_io (9)
- Initialize a device for use with IO space
- pci_enable_device_mem (9)
- Initialize a device for use with Memory space
- pci_enable_sriov (9)
- enable the SR-IOV capability
- pci_find_ht_capability (9)
- query a device's Hypertransport capabilities
- pci_find_next_bus (9)
- begin or continue searching for a PCI bus
- pci_find_next_ht_capability (9)
- query a device's Hypertransport capabilities
- pci_get_class (9)
- begin or continue searching for a PCI device by class
- pci_get_device (9)
- begin or continue searching for a PCI device by vendor...
- pci_get_subsys (9)
- begin or continue searching for a PCI device by vendor...
- pci_hp_change_slot_info (9)
- changes the slot's information structure in the...
- pci_hp_create_module_link (9)
- create symbolic link to the hotplug driver mo...
- pci_hp_deregister (9)
- deregister a hotplug_slot with the PCI hotplug subsystem
- pci_hp_remove_module_link (9)
- remove symbolic link to the hotplug driver mo...
- pci_load_and_free_saved_state (9)
- Reload the save state pointed to by state...
- pci_match_id (9)
- See if a pci device matches a given pci_id table
- pci_msi_vec_count (9)
- Return the number of MSI vectors a device can send
- pci_msix_vec_count (9)
- return the number of device's MSI-X table entries
- pci_num_vf (9)
- return number of VFs associated with a PF device_relea...
- pci_platform_rom (9)
- provides a pointer to any ROM image provided by the pl...
- pci_pme_capable (9)
- check the capability of PCI device to generate PME#
- pci_probe_reset_bus (9)
- probe whether a PCI bus can be reset
- pci_probe_reset_slot (9)
- probe whether a PCI slot can be reset
- pci_reset_bridge_secondary_bus (9)
- Reset the secondary bus on a PCI bridge.
- pci_restore_state (9)
- Restore the saved state of a PCI device
- pci_save_state (9)
- save the PCI configuration space of a device before su...
- pci_select_bars (9)
- Make BAR mask from the type of resource
- pci_set_cacheline_size (9)
- ensure the CACHE_LINE_SIZE register is programmed
- pci_set_power_state (9)
- Set the power state of a PCI device
- pci_sriov_get_totalvfs (9)
- - get total VFs supported on this device
- pci_sriov_set_totalvfs (9)
- - reduce the TotalVFs available
- pci_stop_and_remove_bus_device (9)
- remove a PCI device and any children
- pci_unmap_rom (9)
- unmap the ROM from kernel space
- pci_wake_from_d3 (9)
- enable/disable device to wake up from D3_hot or D3_cold
- pci_write_rom (9)
- used to enable access to the PCI ROM display
- pciconfig_iobase (2)
- pci device information handling
- pciconfig_read (2)
- pci device information handling
- pciconfig_write (2)
- pci device information handling
- PCPIntro (3)
- introduction to the Performance Co-Pilot (PCP) libraries
- pcre16_pattern_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre16_utf16_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre2_code_copy_with_tables (3)
- Perl-compatible regular expressions (revise...
- pcre2_dfa_match (3)
- Perl-compatible regular expressions (revised API)
- pcre2_get_match_data_size (3)
- Perl-compatible regular expressions (revised ...
- pcre2_get_startchar (3)
- Perl-compatible regular expressions (revised API)
- pcre2_jit_match (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match_context_copy (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match_context_create (3)
- Perl-compatible regular expressions (revised...
- pcre2_match_context_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match_data_create (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match_data_create_from_pattern (3)
- Perl-compatible regular expression...
- pcre2_match_data_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_character_tables (3)
- Perl-compatible regular expressions (revised...
- pcre2_set_depth_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_heap_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_match_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_max_pattern_length (3)
- Perl-compatible regular expressions (revis...
- pcre2_substring_length_byname (3)
- Perl-compatible regular expressions (revi...
- pcre2_substring_length_bynumber (3)
- Perl-compatible regular expressions (re...
- pcre2grep (1)
- a grep with Perl-compatible regular expressions.
- pcre2matching (3)
- Perl-compatible regular expressions (revised API)
- pcre32_pattern_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre32_utf32_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre_pattern_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre_utf16_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre_utf32_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcregrep (1)
- a grep with Perl-compatible regular expressions.
- pcrematching (3)
- Perl-compatible regular expressions
- pdbedit (8)
- manage the SAM database (Database of Samba Users)
- pdf180 (1)
- rotate the pages of pdf files
- pdf270 (1)
- rotate the pages of pdf files
- pdf2ps (1)
- Ghostscript PDF to PostScript translator
- pdf90 (1)
- rotate the pages of pdf files
- pdfbook (1)
- put the pages of PDF files into 2-up signatures
- pdfdetach (1)
- Portable Document Format (PDF) document embedded file ...
- pdfflip (1)
- rotate the pages of pdf files
- pdfjam (1)
- A shell script for manipulating PDF files
- pdfjoin (1)
- join together pages from multiple PDF files
- pdfmom (1)
- Produce PDF documents using the mom macro set
- pdfnup (1)
- n-up the pages of pdf files
- pdfpun (1)
- n-up the pages of a pdf file, with right-to-left ordering
- pdftohtml (1)
- program to convert PDF files into HTML, XML and PNG im...
- pecho_wchar (3ncurses)
- create and display curses pads
- pechochar (3ncurses)
- create and display curses pads
- PEM_do_header (3osslssl-3)
- PEM encoding routines
- PEM_FLAG_EAY_COMPATIBLE (3osslssl-3)
- read PEM format files with custom proc...
- PEM_FLAG_ONLY_B64 (3osslssl-3)
- read PEM format files with custom processing
- PEM_FLAG_SECURE (3osslssl-3)
- read PEM format files with custom processing
- PEM_get_EVP_CIPHER_INFO (3osslssl-3)
- PEM encoding routines
- PEM_read_bio_DHparams (3osslssl-3)
- PEM routines
- PEM_read_bio_ex (3osslssl-3)
- read PEM format files with custom processing
- PEM_read_DHparams (3osslssl-3)
- PEM routines
- PEM_write_bio_DHparams (3osslssl-3)
- PEM routines
- PEM_write_bio_DHxparams (3osslssl-3)
- PEM object encoding routines
- PEM_write_DHparams (3osslssl-3)
- PEM routines
- PEM_write_DHxparams (3osslssl-3)
- PEM object encoding routines
- penetrate (6x)
- simulates a classic arcade shooting game
- perl (1)
- The Perl 5 language interpreter
- perl5004delta (1)
- what's new for perl5.004
- perl5005delta (1)
- what's new for perl5.005
- perl5100delta (1)
- what is new for perl 5.10.0
- perl5101delta (1)
- what is new for perl v5.10.1
- perl5120delta (1)
- what is new for perl v5.12.0
- perl5121delta (1)
- what is new for perl v5.12.1
- perl5122delta (1)
- what is new for perl v5.12.2
- perl5123delta (1)
- what is new for perl v5.12.3
- perl5124delta (1)
- what is new for perl v5.12.4
- perl5125delta (1)
- what is new for perl v5.12.5
- perl5140delta (1)
- what is new for perl v5.14.0
- perl5141delta (1)
- what is new for perl v5.14.1
- perl5142delta (1)
- what is new for perl v5.14.2
- perl5143delta (1)
- what is new for perl v5.14.3
- perl5144delta (1)
- what is new for perl v5.14.4
- perl5160delta (1)
- what is new for perl v5.16.0
- perl5161delta (1)
- what is new for perl v5.16.1
- perl5162delta (1)
- what is new for perl v5.16.2
- perl5163delta (1)
- what is new for perl v5.16.3
- perl5180delta (1)
- what is new for perl v5.18.0
- perl5181delta (1)
- what is new for perl v5.18.1
- perl5182delta (1)
- what is new for perl v5.18.2
- perl5184delta (1)
- what is new for perl v5.18.4
- perl5200delta (1)
- what is new for perl v5.20.0
- perl5201delta (1)
- what is new for perl v5.20.1
- perl5202delta (1)
- what is new for perl v5.20.2
- perl5203delta (1)
- what is new for perl v5.20.3
- perl5220delta (1)
- what is new for perl v5.22.0
- perl5221delta (1)
- what is new for perl v5.22.1
- perl5222delta (1)
- what is new for perl v5.22.2
- perl5223delta (1)
- what is new for perl v5.22.3
- perl5224delta (1)
- what is new for perl v5.22.4
- perl5240delta (1)
- what is new for perl v5.24.0
- perl5241delta (1)
- what is new for perl v5.24.1
- perl5242delta (1)
- what is new for perl v5.24.2
- perl5243delta (1)
- what is new for perl v5.24.3
- perl5244delta (1)
- what is new for perl v5.24.4
- perl5260delta (1)
- what is new for perl v5.26.0
- perl5261delta (1)
- what is new for perl v5.26.1
- perl5262delta (1)
- what is new for perl v5.26.2
- perl5263delta (1)
- what is new for perl v5.26.3
- perl5280delta (1)
- what is new for perl v5.28.0
- perl5281delta (1)
- what is new for perl v5.28.1
- perl5282delta (1)
- what is new for perl v5.28.2
- perl5283delta (1)
- what is new for perl v5.28.3
- perl5300delta (1)
- what is new for perl v5.30.0
- perl5301delta (1)
- what is new for perl v5.30.1
- perl5302delta (1)
- what is new for perl v5.30.2
- perl5303delta (1)
- what is new for perl v5.30.3
- perl5320delta (1)
- what is new for perl v5.32.0
- perl5321delta (1)
- what is new for perl v5.32.1
- perl5340delta (1)
- what is new for perl v5.34.0
- perl5341delta (1)
- what is new for perl v5.34.1
- perl5360delta (1)
- what is new for perl v5.36.0
- perl5361delta (1)
- what is new for perl v5.36.1
- perl5380delta (1)
- what is new for perl v5.38.0
- perl561delta (1)
- what's new for perl v5.6.1
- perl56delta (1)
- what's new for perl v5.6.0
- perl581delta (1)
- what is new for perl v5.8.1
- perl582delta (1)
- what is new for perl v5.8.2
- perl583delta (1)
- what is new for perl v5.8.3
- perl584delta (1)
- what is new for perl v5.8.4
- perl585delta (1)
- what is new for perl v5.8.5
- perl586delta (1)
- what is new for perl v5.8.6
- perl587delta (1)
- what is new for perl v5.8.7
- perl588delta (1)
- what is new for perl v5.8.8
- perl589delta (1)
- what is new for perl v5.8.9
- perl58delta (1)
- what is new for perl v5.8.0
- perlapi (1)
- autogenerated documentation for the perl public API
- perlartistic (1)
- the Perl Artistic License
- perlbug (1)
- how to submit bug reports on Perl
- perlcheat (1)
- Perl 5 Cheat Sheet
- perlclassguts (1)
- Internals of how "feature 'class'" and class syntax works
- perlcommunity (1)
- a brief overview of the Perl community
- perldelta (1)
- what is new for perl v5.38.0
- perlembed (1)
- how to embed perl in your C program
- perlgit (1)
- Detailed information about git and the Perl repository
- perlgpl (1)
- the GNU General Public License, version 1
- perlguts (1)
- Introduction to the Perl API
- perlhack (1)
- How to hack on Perl
- perlhacktips (1)
- Tips for Perl core C code hacking
- perlhacktut (1)
- Walk through the creation of a simple C code patch
- perlhaiku (1)
- Perl version 5.10+ on Haiku
- perlhist (1)
- the Perl history records
- perlhpux (1)
- Perl version 5 on Hewlett-Packard Unix (HP-UX) systems
- perlhurd (1)
- Perl version 5 on Hurd
- perlinterp (1)
- An overview of the Perl interpreter
- PerlIO::via (3)
- Helper class for PerlIO layers implemented in perl
- perllocale (1)
- Perl locale handling (internationalization and localiz...
- perlmroapi (1)
- Perl method resolution plugin interface
- perlperf (1)
- Perl Performance and Optimization Techniques
- perlpod (1)
- the Plain Old Documentation format
- perlpragma (1)
- how to write a user pragma
- perlrebackslash (1)
- Perl Regular Expression Backslash Sequences and Escapes
- perlrecharclass (1)
- Perl Regular Expression Character Classes
- perlreftut (1)
- Mark's very short tutorial about references
- perlreguts (1)
- Description of the Perl regular expression engine.
- perlrepository (1)
- Links to current information on the Perl source reposi...
- perlrun (1)
- how to execute the Perl interpreter
- perlsecpolicy (1)
- Perl security report handling policy
- perlsource (1)
- A guide to the Perl source tree
- perlthanks (1)
- how to submit bug reports on Perl
- perlthrtut (1)
- Tutorial on threads in Perl
- perltie (1)
- how to hide an object class in a simple variable
- perltodo (1)
- Link to the Perl to-do list
- perltrap (1)
- Perl traps for the unwary
- perlunicook (1)
- cookbookish examples of handling Unicode in Perl
- perluniprops (1)
- Index of Unicode Version 15.0.0 character properties i...
- perlutil (1)
- utilities packaged with the Perl distribution
- personality (2)
- set the process execution domain
- petri (6x)
- simulates mold growing in a petri dish
- pfbtopfa (1)
- Convert Postscript .pfb fonts to .pfa format using gho...
- tc-pfifo_fast (8)
- three-band first in, first out queue
- pg_amcheck (1pg161)
- checks for corruption in one or more PostgreSQL databases
- pg_archivecleanup (1pg161)
- clean up PostgreSQL WAL archive files
- pg_checksums (1pg161)
- enable, disable or check data checksums in a PostgreS...
- pg_config (1pg93)
- retrieve information about the installed version of Po...
- pg_isready (1pg161)
- check the connection status of a PostgreSQL server
- pg_receivewal (1pg161)
- stream write-ahead logs from a PostgreSQL server
- pg_resetwal (1pg161)
- reset the write-ahead log and other control informatio...
- pg_restore (1pg161)
- restore a PostgreSQL database from an archive file cre...
- pg_rewind (1pg161)
- synchronize a PostgreSQL data directory with another d...
- pg_test_fsync (1pg161)
- determine fastest wal_sync_method for PostgreSQL
- pg_test_timing (1pg161)
- measure timing overhead
- pg_verifybackup (1pg161)
- verify the integrity of a base backup of a Postgre...
- pg_waldump (1pg161)
- display a human-readable rendering of the write-ahead ...
- pgbench (1pg161)
- run a benchmark test on PostgreSQL
- pgmdeshadow (1)
- Deshadow a PGM image
- pgmenhance (1)
- edge-enhance a PGM image
- pgmhist (1)
- print a histogram of the values in a PGM image
- pgmmorphconv (1)
- perform morphological convolutions: dilation, erosion
- pgmnoise (1)
- create a PGM image made up of white noise
- pgmtolispm (1)
- convert a PGM image to Lisp Machine format
- pgpverify (1)
- Cryptographically verify Usenet control messages
- pgrep (1)
- look up or signal processes based on name and other at...
- phantasia (6)
- an interterminal fantasy game
- phar (1)
- PHAR (PHP archive) command line tool
- phar.phar (1)
- PHAR (PHP archive) command line tool
- phosphor (6x)
- simulates an old terminal with long-sustain phosphor
- photo (n)
- Full-color images
- photopile (6x)
- displays multiple images in a periodically shuffled pile
- php (1)
- PHP Command Line Interface 'CLI'
- php-cgi (1)
- PHP Common Gateway Interface 'CGI' command
- php-config (1)
- get information about PHP configuration and compile op...
- phpize (1)
- prepare a PHP extension for compiling
- phy_aneg_done (9)
- return auto-negotiation status
- phy_attach (9)
- attach a network device to a particular PHY device
- phy_attach_direct (9)
- attach a network device to a given PHY device pointer
- phy_change (9)
- Scheduled by the phy_interrupt/timer to handle PHY cha...
- phy_clear_interrupt (9)
- Ack the phy device's interrupt
- phy_config_interrupt (9)
- configure the PHY device for the requested interrupts
- phy_connect (9)
- connect an ethernet device to a PHY device
- phy_connect_direct (9)
- connect an ethernet device to a specific phy_device
- phy_detach (9)
- detach a PHY device from its network device
- phy_device_register (9)
- Register the phy device on the MDIO bus
- phy_disable_interrupts (9)
- Disable the PHY interrupts from the PHY side
- phy_disconnect (9)
- disable interrupts, stop state machine, and detach a P...
- phy_driver_register (9)
- register a phy_driver with the PHY layer
- phy_enable_interrupts (9)
- Enable the interrupts from the PHY side
- phy_error (9)
- enter HALTED state for this PHY device
- phy_ethtool_get_eee (9)
- get EEE supported and status
- phy_ethtool_set_eee (9)
- set EEE supported and status
- phy_ethtool_sset (9)
- generic ethtool sset function, handles all the details
- phy_find_first (9)
- finds the first PHY device on the bus
- phy_find_setting (9)
- find a PHY settings array entry that matches speed & d...
- phy_find_valid (9)
- find a PHY setting that matches the requested features...
- phy_get_eee_err (9)
- report the EEE wake error count
- phy_init_eee (9)
- init and check the EEE feature
- phy_interrupt (9)
- PHY interrupt handler
- phy_mii_ioctl (9)
- generic PHY MII ioctl interface
- phy_poll_reset (9)
- Safely wait until a PHY reset has properly completed
- phy_prepare_link (9)
- prepares the PHY layer to monitor link status
- phy_print_status (9)
- Convenience function to print out the current phy status
- phy_probe (9)
- probe and init a PHY device
- phy_read_mmd_indirect (9)
- reads data from the MMD registers
- phy_register_fixup (9)
- creates a new phy_fixup and adds it to the list
- phy_sanitize_settings (9)
- make sure the PHY is set to supported speed and d...
- phy_start (9)
- start or restart a PHY device
- phy_start_aneg (9)
- start auto-negotiation for this PHY device
- phy_start_interrupts (9)
- request and enable interrupts for a PHY device
- phy_start_machine (9)
- start PHY state machine tracking
- phy_state_machine (9)
- Handle the state machine
- phy_stop (9)
- Bring down the PHY link, and stop checking the status
- phy_stop_interrupts (9)
- disable interrupts from a PHY device
- phy_stop_machine (9)
- stop the PHY state machine tracking
- phy_write_mmd_indirect (9)
- writes data to the MMD registers
- phys (2)
- unimplemented system calls
- phys_to_virt (9)
- map physical address to virtual
- pi (1)
- compute decimal Archimedes' constant Pi to arbitrary a...
- pic2graph (1)
- convert a PIC diagram into a cropped image
- pic2plot (1)
- The GNU plotting utilities.
- pico (1)
- simple text editor in the style of the Alpine Composer
- picttoppm (1)
- convert a Macintosh PICT file to a PPM
- pid_alive (9)
- check that a task structure is not stale
- pidfile (3bsd)
- "library for PID files handling"
- pidfile_close (3bsd)
- "library for PID files handling"
- pidfile_open (3bsd)
- "library for PID files handling"
- pidfile_remove (3bsd)
- "library for PID files handling"
- pidfile_write (3bsd)
- "library for PID files handling"
- pidof (8)
- find the process ID of a running program.
- ping (8)
- send ICMP ECHO_REQUEST to network hosts
- pinky (1)
- lightweight finger
- pipe (3p)
- create an interprocess channel
- pipes (6x)
- fill the screen with a plumbing system.
- pitchplay (1)
- wrapper script to play audio tracks with cdda2wav with...
- pivot_root (2)
- change the root filesystem
- pivot_root (8)
- change the root filesystem
- pixmap (n)
- image type for the XPM file format.
- pjtoppm (1)
- convert an HP PaintJet file to a PPM image
- pkcheck (1)
- Check whether a process is authorized
- pkcs11-helper-1 (8)
- Simplified PKCS#11 library.
- PKCS12_add_friendlyname_asc (3osslssl-3)
- Functions to add the friendlyname ...
- PKCS12_add_friendlyname_uni (3osslssl-3)
- Functions to add the friendlyname ...
- PKCS12_add_friendlyname_utf8 (3osslssl-3)
- Functions to add the friendlyname...
- PKCS12_add_localkeyid (3osslssl-3)
- Add the localKeyId attribute to a PKCS#1...
- PKCS12_decrypt_skey (3osslssl-3)
- PKCS12 shrouded keyBag decrypt functions
- PKCS12_decrypt_skey_ex (3osslssl-3)
- PKCS12 shrouded keyBag decrypt functions
- PKCS12_get_friendlyname (3osslssl-3)
- Retrieve the friendlyname attribute fr...
- PKCS12_newpass (3osslssl-3)
- change the password of a PKCS12 structure
- PKCS5_PBKDF2_HMAC (3osslssl-3)
- password based derivation routines with salt...
- PKCS5_PBKDF2_HMAC_SHA1 (3osslssl-3)
- password based derivation routines with...
- PKCS7_type_is_other (3osslssl-3)
- determine content type of PKCS#7 enveloped...
- pkexec (1)
- Execute a command as another user
- pkfix-helper (1)
- preprocess dvips-produced PostScript documents before ...
- pki (n)
- Implementation of the public key cipher
- pkill (1)
- look up or signal processes based on name and other at...
- pkttyagent (1)
- Textual authentication helper
- pl2pm (1)
- Rough tool to translate Perl4 .pl files to Perl5 .pm m...
- place (n)
- Geometry manager for fixed or rubber-sheet placement
- platform_shell (n)
- System identification support code and utilities
- platform_device_add (9)
- add a platform device to device hierarchy
- platform_device_register_data (9)
- add a platform-level device with platform...
- platform_device_register_full (9)
- add a platform-level device with resource...
- platform_device_register_resndata (9)
- add a platform-level device with reso...
- platform_driver_probe (9)
- register driver for non-hotpluggable device
- play (1)
- Sound eXchange, the Swiss Army knife of audio manipula...
- plot (1)
- translate GNU metafiles to other graphics formats
- plotfont (1)
- produce character maps of fonts supported by the plott...
- plotutils (1)
- The GNU plotting utilities.
- plymouth (8)
- A graphical boot system and logger
- pm-action (8)
- Suspend or Hibernate your computer
- pm-hibernate (8)
- Suspend or Hibernate your computer
- pm-is-supported (1)
- Test whether suspend or hibernate is supported.
- pm-pmu (8)
- suspend the computer on machines using a Macintosh-sty...
- pm-suspend (8)
- Suspend or Hibernate your computer
- pm-suspend-hybrid (8)
- Suspend or Hibernate your computer
- pmAddProfile (3)
- add instance(s) to the current PMAPI instance profile
- pmaf (3)
- event queue services for periodic asynchronous callbacks
- PMAPI (3)
- introduction to the Performance Metrics Application Pr...
- pmCtime (3)
- format the date and time for a reporting timezone
- PMDA (3)
- introduction to the Performance Metrics Domain Agent s...
- pmdacache (3)
- manage a cache of instance domain information for a PMDA
- pmdaCacheLookup (3)
- manage a cache of instance domain information for a PMDA
- pmdaCacheLookupKey (3)
- manage a cache of instance domain information for a ...
- pmdaCacheLookupName (3)
- manage a cache of instance domain information for a...
- pmdaCacheOp (3)
- manage a cache of instance domain information for a PMDA
- pmdaCachePurge (3)
- manage a cache of instance domain information for a PMDA
- pmdaCacheStore (3)
- manage a cache of instance domain information for a PMDA
- pmdaCacheStoreKey (3)
- manage a cache of instance domain information for a PMDA
- pmdaChildren (3)
- translate a PMID to a set of dynamic performance metri...
- pmdaCloseHelp (3)
- help text support for a PMDA
- pmdaConnect (3)
- establish a connection between a daemon PMDA and PMCD
- pmdaDaemon (3)
- initialize the PMDA to run as a daemon
- pmdaDesc (3)
- get the description of a metric from a PMDA
- pmdaDSO (3)
- initialize the PMDA to run as a DSO
- pmdaEventQueueHandle (3)
- utilities for PMDAs managing event queues
- pmdaFetch (3)
- fill a pmResult structure with the requested metric va...
- pmdaGetHelp (3)
- help text support for a PMDA
- pmdaGetInDomHelp (3)
- help text support for a PMDA
- pmdahelp (3)
- help text support for a PMDA
- pmdaOpenHelp (3)
- help text support for a PMDA
- pmdaProfile (3)
- update instance profile for PMDA in preparation for th...
- pmdaSetCheckCallBack (3)
- generic PDU processing for a PMDA
- pmdaSetFetchCallBack (3)
- fill a pmResult structure with the requested metri...
- pmdaText (3)
- extract metric help text for a PMDA
- pmDelProfile (3)
- delete instance(s) from the current PMAPI instance pro...
- pmFetch (3)
- get performance metric values
- pmFetchArchive (3)
- get performance metrics directly from an archive log
- pmflush (3)
- print formatted output in a window or to standard error
- pmGetArchiveEnd (3)
- locate logical end of file for an archive log
- pmGetArchiveLabel (3)
- fetch the label record from a performance metrics arc...
- pmGetChildren (3)
- return the descendent nodes of a PMNS node
- pmGetChildrenStatus (3)
- return the descendent nodes of a PMNS node and thei...
- pmGetContextHostName (3)
- return the hostname associated with a Performance ...
- pmGetInDomArchive (3)
- get instance identifiers for a performance metrics in...
- pmGetPMNSLocation (3)
- determine the location of the currently used PMNS
- pmiEnd (3)
- finish up a LOGIMPORT archive
- pmiGetHandle (3)
- define a handle for a metric-instance pair
- pmiPutResult (3)
- add a data record to a LOGIMPORT archive
- pmiPutValueHandle (3)
- add a value for a metric-instance pair via a handle
- pmiSetHostname (3)
- set the source host name for a LOGIMPORT archive
- pmiSetTimezone (3)
- set the source timezone for a LOGIMPORT archive
- pmiStart (3)
- establish a new LOGIMPORT context
- pmiUseContext (3)
- change LOGIMPORT context
- pmiWrite (3)
- flush data to a LOGIMPORT archive
- pmLoadASCIINameSpace (3)
- establish a local PMNS for an application
- pmlocalpmda (3)
- change the table of DSO PMDAs for PM_CONTEXT_LOCAL con...
- pmLocaltime (3)
- convert the date and time for a reporting timezone
- pmLookupInDomArchive (3)
- translate an instance name into an instance identi...
- pmNameInDomArchive (3)
- translate an instance identifier into an instance name
- pmNewContext (3)
- establish a new PMAPI context
- pmNewContextZone (3)
- establish a reporting timezone based on a PMAPI context
- pmNewZone (3)
- establish a reporting timezone
- pmNumberStr (3)
- fixed width output format for numbers
- pmparsehostspec (3)
- uniform host specification parser
- pmRecordAddHost (3)
- record mode support for PMAPI clients
- pmSetMode (3)
- set collection time parameters for the current PMAPI c...
- pmspeclocalpmda (3)
- process command-line argument for the table of DSO PMDAs
- pmt-ehd (8)
- create an encrypted disk image
- pmtime (3)
- time control functions for synchronizing the archive p...
- pmTimeRecv (3)
- time control functions for synchronizing the archive p...
- pmTraversePMNS (3)
- traverse the performance metrics name space
- pmUseContext (3)
- change current PMAPI context
- pmUseZone (3)
- re-establish a reporting timezone
- pmWhichContext (3)
- identify the current PMAPI context
- pmWhichZone (3)
- return current reporting timezone
- png (5)
- Portable Network Graphics (PNG) format
- png2yuv (1)
- Convert PNG images to the YUV4MPEG stream format.
- pnmarith (1)
- perform arithmetic on two PNM images
- pnmcomp (1)
- composite (overlay) two PNM images together
- pnmdepth (1)
- change the maxval in a PNM image
- pnmhisteq (1)
- histogram equalize a PNM image
- pnmhistmap (1)
- draw a histogram for a PGM or PPM file
- pnmindex (1)
- build a visual index of a bunch of PNM images
- pnminterp (1)
- replaced by pamstretch
- pnmnlfilt (1)
- non-linear filters: smooth, alpha trim mean, optimal e...
- pnmnorm (1)
- normalize the contrast in a Netbpm image
- pnmpsnr (1)
- compute the difference between two images (the PSNR)
- pnmquant (1)
- quantize the colors in a Netpbm image to a smaller set
- pnmquantall (1)
- run Pnmquant on a bunch of files all at once, so they ...
- pnmremap (1)
- replace colors in a PNM image with colors from another...
- pnmshear (1)
- shear a PNM image by a specified angle
- pnmsmooth (1)
- smooth out an image
- pnmstitch (1)
- stitch together two panoramic (side-by-side) photographs
- pnmtopclxl (1)
- convert a PNM image to an HP LaserJet PCL XL printer s...
- pnoutrefresh (3ncurses)
- create and display curses pads
- pnp_add_id (9)
- adds an EISA id to the specified device
- pnp_register_card_driver (9)
- registers a PnP card driver with the PnP Layer
- pnp_register_protocol (9)
- adds a pnp protocol to the pnp layer
- pnp_release_card_device (9)
- call this when the driver no longer needs the d...
- pnp_request_card_device (9)
- Searches for a PnP device under the specified card
- pnp_start_dev (9)
- low-level start of the PnP device
- pnp_stop_dev (9)
- low-level disable of the PnP device
- pnp_unregister_card_driver (9)
- unregisters a PnP card driver from the PnP L...
- pnp_unregister_protocol (9)
- removes a pnp protocol from the pnp layer
- pod2html (1)
- convert .pod files to .html files
- Pod::Checker (3)
- check pod documents for syntax errors
- Pod::Coverage (3)
- Checks if the documentation of a module is comprehensive
- Pod::Coverage::CountParents (3)
- subclass of Pod::Coverage that examines the...
- Pod::Coverage::ExportOnly (3)
- subclass of Pod::Coverage than only examines ...
- Pod::Coverage::TrustPod (3)
- allow a module's pod to contain Pod::Coverage h...
- Pod::Eventual::Simple (3)
- just get an array of the stuff Pod::Eventual finds
- Pod::Html (3)
- module to convert pod files to HTML
- Pod::Html::Util (3)
- helper functions for Pod-Html
- Pod::InputObjects (3)
- objects representing POD input paragraphs, commands, ...
- Pod::ParseUtils (3)
- helpers for POD parsing and conversion
- Pod::Perldoc::ToANSI (3)
- render Pod with ANSI color escapes
- Pod::Perldoc::ToChecker (3)
- let Perldoc check Pod for errors
- Pod::Perldoc::ToTerm (3)
- render Pod with terminal escapes
- Pod::Simple::Checker (3)
- - check the Pod syntax of a document
- Pod::Simple::HTML (3)
- convert Pod to HTML
- Pod::Simple::HTMLBatch (3)
- convert several Pod files to several HTML files
- Pod::Simple::JustPod (3)
- - just the Pod, the whole Pod, and nothing but the...
- Pod::Simple::Methody (3)
- - turn Pod::Simple events into method calls
- Pod::Simple::Search (3)
- find POD documents in directory trees
- Pod::Simple::TextContent (3)
- - get the text content of Pod
- Pod::Simple::XHTML (3)
- - format Pod as validating XHTML
- Pod::Text::Termcap (3)
- Convert POD data to ASCII text with format escapes
- Pod::Usage (3)
- extracts POD documentation and shows usage information
- podchecker (1)
- check the syntax of POD format documentation files
- podspell (1)
- pod spell checking command line interface
- polkit (8)
- Authorization Manager
- polkitd (8)
- The polkit system daemon
- poll.h (0p)
- definitions for the pollfunction
- polyhedra (6x)
- draws the 80 uniform polyhedra and their duals
- polyominoes (6x)
- fill a rectangle with irregularly-shaped blocks.
- polytopes (6x)
- Draws one of the six regular 4d polytopes rotating in 4d.
- pom (6)
- display the phase of the moon
- pom_xpath_inject (7)
- inject XML code into POM file
- pom_xpath_remove (7)
- remove an XML node from POM file
- pom_xpath_replace (7)
- replace XML node from POM file with given XML code
- pom_xpath_set (7)
- set text contents of XML node from POM file
- pong (6x)
- Pong Home Video Game Emulator
- posix_mem_offset (3p)
- find offset and length of a mapped typed memory block...
- posix_spawnattr_getflags (3p)
- get and set the spawn-flags attribute of a sp...
- posix_spawnattr_getpgroup (3p)
- get and set the spawn-pgroup attribute of a ...
- posix_spawnattr_getschedparam (3p)
- get and set the spawn-schedparam attribu...
- posix_spawnattr_getschedpolicy (3p)
- get and set the spawn-schedpolicy attri...
- posix_spawnattr_getsigdefault (3p)
- get and set the spawn-sigdefault attribu...
- posix_spawnattr_getsigmask (3p)
- get and set the spawn-sigmask attribute of ...
- posix_spawnattr_init (3p)
- initialize the spawn attributes object (ADVANCED ...
- posix_spawnattr_setflags (3p)
- set the spawn-flags attribute of a spawn attr...
- posix_spawnattr_setpgroup (3p)
- set the spawn-pgroup attribute of a spawn at...
- posix_spawnattr_setschedparam (3p)
- set the spawn-schedparam attribute of a ...
- posix_spawnattr_setschedpolicy (3p)
- set the spawn-schedpolicy attribute of ...
- posix_spawnattr_setsigdefault (3p)
- set the spawn-sigdefault attribute of a ...
- posix_spawnattr_setsigmask (3p)
- set the spawn-sigmask attribute of a spawn ...
- posix_trace_attr_destroy (3p)
- destroy and initialize the trace stream attri...
- posix_trace_attr_getinherited (3p)
- retrieve and set the behavior of a trace...
- posix_trace_attr_getstreamfullpolicy (3p)
- retrieve and set the behavior of ...
- posix_trace_attr_init (3p)
- initialize the trace stream attributes object (T...
- posix_trace_attr_setinherited (3p)
- retrieve and set the behavior of a trace...
- posix_trace_attr_setstreamfullpolicy (3p)
- retrieve and set the behavior of ...
- posix_trace_create (3p)
- trace stream initialization, flush, and shutdown fr...
- posix_trace_eventid_equal (3p)
- manipulate the trace event type identifier (...
- posix_trace_flush (3p)
- trace stream flush from a process (TRACING)
- posix_trace_get_attr (3p)
- retrieve the trace attributes or trace status (TR...
- posix_trace_get_filter (3p)
- retrieve and set the filter of an initialized t...
- posix_trace_get_status (3p)
- retrieve the trace status (TRACING)
- posix_trace_shutdown (3p)
- trace stream shutdown from a process (TRACING)
- posixoptions (7)
- optional parts of the POSIX standard
- postcat (1)
- show Postfix queue file contents
- poweroff (8)
- Halt, power-off or reboot the machine
- ppm3d (1)
- convert two PPM images into an anaglyph (red/blue 3d g...
- ppmbrighten (1)
- change a PPM image's Saturation and Value
- ppmchange (1)
- change all pixels of one color to another in a PPM image
- ppmcie (1)
- draw a CIE color chart as a PPM image
- ppmdist (1)
- simplistic grayscale assignment for machine generated,...
- ppmdither (1)
- ordered dither for color images
- ppmflash (1)
- brighten a picture to approach white
- ppmglobe (1)
- generate strips to glue onto a sphere
- ppmhist (1)
- print a histogram of the colors in a PPM image
- ppmmix (1)
- blend together two PPM images
- ppmquant (1)
- quantize the colors in a PPM image down to a specified...
- ppmrough (1)
- create PPM image of two colors with a ragged border be...
- ppmshadow (1)
- add simulated shadows to a PPM image
- ppmshift (1)
- shift lines of a PPM image left or right by a random a...
- ppmtoascii (1)
- convert a PPM image to ASCII graphics with ANSI termin...
- ppmtolj (1)
- convert a PPM image to an HP LaserJet PCL 5 Color file
- ppmtomitsu (1)
- convert a PPM image to a Mitsubishi S340-10 file
- ppmtoneo (1)
- convert a PPM into an Atari Neochrome .neo file
- ppmtopict (1)
- convert a PPM image to a Macintosh PICT file
- ppmtopj (1)
- convert a PPM image to an HP PaintJet file
- ppmtopjxl (1)
- convert a PPM image to an HP PaintJet XL PCL file
- ppmtorgb3 (1)
- separate a PPM image into three PGMs
- ppmwheel (1)
- make a PPM image of a color wheel
- ppolicy-check-password (5)
- Password quality checker for OpenLDAP ppolicy ov...
- pppd-radius (8)
- RADIUS authentication plugin for pppd (8)
- pppoe-connect (8)
- Shell script to manage a PPPoE link
- pppoe-setup (8)
- Shell script to configure Roaring Penguin PPPoE client
- pppoe-start (8)
- Shell script to bring up a PPPoE link
- pppoe-status (8)
- Shell script to report on status of PPPoE link
- pppoe-stop (8)
- Shell script to shut down a PPPoE link
- ppt (6)
- "reformat input as punch cards, paper tape or morse code"
- preconv (1)
- convert encoding of input files to something GNU troff...
- preempt_notifier_register (9)
- tell me when current is being preempted & res...
- prefresh (3ncurses)
- create and display curses pads
- PREPARE_TRANSACTION (7pg161)
- prepare the current transaction for two-phase ...
- print (3ncurses)
- ship binary data to printer
- printafm (1)
- Print the metrics from a Postscript font in AFM format...
- printk_dev_hash (9)
- print a kernel message include a hash over the message
- printk_hash (9)
- print a kernel message include a hash over the message
- priv_to_wiphy (9)
- return the wiphy containing the priv
- privoxy (1)
- Privacy Enhancing Proxy
- prj2make (1)
- Makefile generator from Visual Studio and Sharp Develo...
- Probe::Perl (3pm)
- Information about the currently running perl
- Proc::Killfam (3)
- kill a list of pids, and all their sub-children
- Proc::ProcessTable (3)
- Perl extension to access the unix process table
- proc_dointvec_minmax (9)
- read a vector of integers with min/max values
- proc_dointvec_userhz_jiffies (9)
- read a vector of integers as 1/USER_HZ sec...
- proc_doulongvec_minmax (9)
- read a vector of long integers with min/max values
- proc_flush_task (9)
- Remove dcache entries for task from the /proc dcache.
- proc_print_scsidevice (9)
- return data about this host
- proc_scsi_write (9)
- handle writes to /proc/scsi/scsi
- procbatch (8)
- Process an INN funnel file or innfeed-dropped file
- ProcessEventNotification (9)
- Route EventNotificationReply to all event hand...
- procinfo (8)
- display system status gathered from /proc
- procmailsc (5)
- procmail weighted scoring technique
- PROFESSION_INFO_get0_namingAuthority (3osslssl-3)
- Accessors and settors for...
- PROFESSION_INFO_set0_namingAuthority (3osslssl-3)
- Accessors and settors for...
- profiles (1)
- A utility to report and change SIDs in registry files
- program_invocation_short_name (3)
- obtain name used to invoke calling program
- projectiveplane (6x)
- Draws a 4d embedding of the real projective plane.
- projid (5)
- the project name mapping file
- property (7osslssl-3)
- Properties, a selection mechanism for algorithm imple...
- prove (1)
- Run tests through a TAP harness.
- providence (6x)
- eye in glory screenhack
- provider-asym_cipher (7osslssl-3)
- The asym_cipher library <-> provider func...
- provider-base (7osslssl-3)
- The basic OpenSSL library <-> provider functions
- provider-cipher (7osslssl-3)
- The cipher library <-> provider functions
- provider-decoder (7osslssl-3)
- The OSSL_DECODER library <-> provider functions
- provider-digest (7osslssl-3)
- The digest library <-> provider functions
- provider-encoder (7osslssl-3)
- The OSSL_ENCODER library <-> provider functions
- provider-kdf (7osslssl-3)
- The KDF library <-> provider functions
- provider-kem (7osslssl-3)
- The kem library <-> provider functions
- provider-keyexch (7osslssl-3)
- The keyexch library <-> provider functions
- provider-keymgmt (7osslssl-3)
- The KEYMGMT library <-> provider functions
- provider-mac (7osslssl-3)
- The mac library <-> provider functions
- provider-rand (7osslssl-3)
- The random number generation library <-> provide...
- provider-signature (7osslssl-3)
- The signature library <-> provider functions
- provider-storemgmt (7osslssl-3)
- The OSSL_STORE library <-> provider functions
- prune (1)
- Prune directed graphs
- prunehistory (8)
- Remove tokens from Usenet history file
- ps (1)
- report a snapshot of the current processes.
- ps2ascii (1)
- Ghostscript translator from PostScript or PDF to ASCII
- ps2frag (1)
- obsolete shell script for the PSfrag system.
- ps2pdf (1)
- Convert PostScript to PDF using ghostscript
- ps2pdfwr (1)
- Convert PostScript to PDF without specifying Compatibi...
- ps2ps (1)
- Ghostscript PostScript "distiller"
- pselect (2)
- synchronous I/O multiplexing
- pselect (3p)
- synchronous I/O multiplexing
- pselect6 (2)
- synchronous I/O multiplexing
- psfaddtable (1)
- add a Unicode character table to a console font
- psfgettable (1)
- extract the embedded Unicode character table from a co...
- psfstriptable (1)
- remove the embedded Unicode character table from a con...
- psfxtable (1)
- handle Unicode character tables for console fonts
- psiconv (1)
- Translate Psion 5 and other EPOC device files.
- psiconv-config (1)
- script to get information about the installed version ...
- pskb_expand_head (9)
- reallocate header of sk_buff
- pskb_put (9)
- add data to the tail of a potentially fragmented buffer
- pskb_trim_rcsum (9)
- trim received skb and update checksum
- pskc_check_version (3)
- API function
- pskc_get_key_algorithm (3)
- API function
- pskc_get_key_algparm_chall_checkdigits (3)
- API function
- pskc_get_key_algparm_chall_encoding (3)
- API function
- pskc_get_key_algparm_chall_max (3)
- API function
- pskc_get_key_algparm_chall_min (3)
- API function
- pskc_get_key_algparm_resp_checkdigits (3)
- API function
- pskc_get_key_algparm_resp_length (3)
- API function
- pskc_get_key_policy_pinmaxlength (3)
- API function
- pskc_get_key_policy_pinminlength (3)
- API function
- pskc_set_key_algorithm (3)
- API function
- pskc_set_key_algparm_chall_checkdigits (3)
- API function
- pskc_set_key_algparm_chall_encoding (3)
- API function
- pskc_set_key_algparm_chall_max (3)
- API function
- pskc_set_key_algparm_chall_min (3)
- API function
- pskc_set_key_algparm_resp_checkdigits (3)
- API function
- pskc_set_key_algparm_resp_length (3)
- API function
- pskc_set_key_policy_pinmaxlength (3)
- API function
- pskc_set_key_policy_pinminlength (3)
- API function
- psl (1)
- Explore the Public Suffix List
- psnup (1)
- multiple pages per sheet
- psresize (1)
- multiple pages per sheet
- pstops (1)
- shuffle pages in a PostScript file
- pt_json_language (n)
- The JSON Grammar Exchange Format
- pt_param (n)
- PackRat Machine Specification
- ptardiff (1)
- program that diffs an extracted archive against an une...
- ptargrep (1)
- Apply pattern matching to the contents of files in a t...
- PTBatcher (1)
- CLI interface to Hugin Batch processor
- PTBatcherGUI (1)
- Hugin batch processor
- pth (3)
- GNU Portable Threads
- pth-config (1)
- Pth library build utility
- pthread.h (0p)
- threads
- pthread_atfork (3p)
- register fork handlers
- pthread_attr_destroy (3)
- initialize and destroy thread attributes object
- pthread_attr_destroy (3p)
- destroy and initialize the thread attributes object
- pthread_attr_getaffinity_np (3)
- set/get CPU affinity attribute in thread at...
- pthread_attr_getdetachstate (3)
- set/get detach state attribute in thread at...
- pthread_attr_getdetachstate (3p)
- get and set the detachstate attribute
- pthread_attr_getguardsize (3)
- set/get guard size attribute in thread attrib...
- pthread_attr_getguardsize (3p)
- get and set the thread guardsize attribute
- pthread_attr_getinheritsched (3)
- set/get inherit-scheduler attribute in thr...
- pthread_attr_getinheritsched (3p)
- get and set the inheritsched attribute (R...
- pthread_attr_getschedparam (3)
- set/get scheduling parameter attributes in t...
- pthread_attr_getschedparam (3p)
- get and set the schedparam attribute
- pthread_attr_getschedpolicy (3)
- set/get scheduling policy attribute in thre...
- pthread_attr_getschedpolicy (3p)
- get and set the schedpolicy attribute (REA...
- pthread_attr_getscope (3)
- set/get contention scope attribute in thread attr...
- pthread_attr_getscope (3p)
- get and set the contentionscope attribute (REALT...
- pthread_attr_getstack (3)
- set/get stack attributes in thread attributes object
- pthread_attr_getstack (3p)
- get and set stack attributes
- pthread_attr_getstackaddr (3)
- set/get stack address attribute in thread att...
- pthread_attr_getstacksize (3)
- set/get stack size attribute in thread attrib...
- pthread_attr_getstacksize (3p)
- get and set the stacksize attribute
- pthread_attr_init (3)
- initialize and destroy thread attributes object
- pthread_attr_init (3p)
- initialize the thread attributes object
- pthread_attr_setaffinity_np (3)
- set/get CPU affinity attribute in thread at...
- pthread_attr_setdetachstate (3)
- set/get detach state attribute in thread at...
- pthread_attr_setdetachstate (3p)
- set the detachstate attribute
- pthread_attr_setguardsize (3)
- set/get guard size attribute in thread attrib...
- pthread_attr_setguardsize (3p)
- set the thread guardsize attribute
- pthread_attr_setinheritsched (3)
- set/get inherit-scheduler attribute in thr...
- pthread_attr_setinheritsched (3p)
- set the inheritsched attribute (REALTIME ...
- pthread_attr_setschedparam (3)
- set/get scheduling parameter attributes in t...
- pthread_attr_setschedparam (3p)
- set the schedparam attribute
- pthread_attr_setschedpolicy (3)
- set/get scheduling policy attribute in thre...
- pthread_attr_setschedpolicy (3p)
- set the schedpolicy attribute (REALTIME TH...
- pthread_attr_setscope (3)
- set/get contention scope attribute in thread attr...
- pthread_attr_setscope (3p)
- set the contentionscope attribute (REALTIME THRE...
- pthread_attr_setstack (3)
- set/get stack attributes in thread attributes object
- pthread_attr_setstack (3p)
- set the stack attribute
- pthread_attr_setstackaddr (3)
- set/get stack address attribute in thread att...
- pthread_attr_setstacksize (3)
- set/get stack size attribute in thread attrib...
- pthread_attr_setstacksize (3p)
- set the stacksize attribute
- pthread_barrier_destroy (3p)
- destroy and initialize a barrier object
- pthread_barrier_wait (3p)
- synchronize at a barrier
- pthread_barrierattr_destroy (3p)
- destroy and initialize the barrier attribu...
- pthread_barrierattr_getpshared (3p)
- get and set the process-shared attribut...
- pthread_barrierattr_init (3p)
- initialize the barrier attributes object
- pthread_barrierattr_setpshared (3p)
- set the process-shared attribute of the...
- pthread_cancel (3)
- send a cancellation request to a thread
- pthread_cancel (3p)
- cancel execution of a thread
- pthread_cleanup_pop (3)
- push and pop thread cancellation clean-up handlers
- pthread_cleanup_pop (3p)
- establish cancellation handlers
- pthread_cleanup_pop_restore_np (3)
- push and pop thread cancellation clean-u...
- pthread_cleanup_push (3)
- push and pop thread cancellation clean-up handlers
- pthread_cleanup_push_defer_np (3)
- push and pop thread cancellation clean-up...
- pthread_cond_broadcast (3p)
- broadcast or signal a condition
- pthread_cond_destroy (3p)
- destroy and initialize condition variables
- pthread_cond_signal (3p)
- signal a condition
- pthread_cond_timedwait (3p)
- wait on a condition
- pthread_condattr_destroy (3p)
- destroy and initialize the condition variable...
- pthread_condattr_getclock (3p)
- get and set the clock selection condition va...
- pthread_condattr_getpshared (3p)
- get and set the process-shared condition v...
- pthread_condattr_init (3p)
- initialize the condition variable attributes object
- pthread_condattr_setclock (3p)
- set the clock selection condition variable a...
- pthread_condattr_setpshared (3p)
- set the process-shared condition variable ...
- pthread_create (3)
- create a new thread
- pthread_create (3p)
- thread creation
- pthread_detach (3)
- detach a thread
- pthread_detach (3p)
- detach a thread
- pthread_equal (3)
- compare thread IDs
- pthread_equal (3p)
- compare thread IDs
- pthread_exit (3)
- terminate calling thread
- pthread_exit (3p)
- thread termination
- pthread_getaffinity_np (3)
- set/get CPU affinity of a thread
- pthread_getattr_np (3)
- get attributes of created thread
- pthread_getconcurrency (3)
- set/get the concurrency level
- pthread_getconcurrency (3p)
- get and set the level of concurrency
- pthread_getcpuclockid (3)
- retrieve ID of a thread's CPU time clock
- pthread_getcpuclockid (3p)
- access a thread CPU-time clock (ADVANCED REALTIM...
- pthread_getname_np (3)
- set/get the name of a thread
- pthread_getschedparam (3)
- set/get scheduling policy and parameters of a thread
- pthread_getschedparam (3p)
- dynamic thread scheduling parameters access (REA...
- pthread_getspecific (3p)
- thread-specific data management
- pthread_join (3)
- join with a terminated thread
- pthread_join (3p)
- wait for thread termination
- pthread_key_create (3p)
- thread-specific data key creation
- pthread_key_delete (3p)
- thread-specific data key deletion
- pthread_kill (3)
- send a signal to a thread
- pthread_kill (3p)
- send a signal to a thread
- pthread_kill_other_threads_np (3)
- terminate all other threads in process
- pthread_mutex_consistent (3p)
- mark state protected by robust mutex as consi...
- pthread_mutex_destroy (3p)
- destroy and initialize a mutex
- pthread_mutex_getprioceiling (3p)
- get and set the priority ceiling of a mut...
- pthread_mutex_init (3p)
- destroy and initialize a mutex
- pthread_mutex_lock (3p)
- lock and unlock a mutex
- pthread_mutex_setprioceiling (3p)
- change the priority ceiling of a mutex (R...
- pthread_mutex_timedlock (3p)
- lock a mutex
- pthread_mutex_trylock (3p)
- lock and unlock a mutex
- pthread_mutexattr_destroy (3p)
- destroy and initialize the mutex attributes ...
- pthread_mutexattr_getprioceiling (3p)
- get and set the prioceiling attribute...
- pthread_mutexattr_getprotocol (3p)
- get and set the protocol attribute of th...
- pthread_mutexattr_getpshared (3p)
- get and set the process-shared attribute
- pthread_mutexattr_getrobust (3p)
- get and set the mutex robust attribute
- pthread_mutexattr_gettype (3p)
- get and set the mutex type attribute
- pthread_mutexattr_init (3p)
- initialize the mutex attributes object
- pthread_mutexattr_setprioceiling (3p)
- set the prioceiling attribute of the ...
- pthread_mutexattr_setprotocol (3p)
- set the protocol attribute of the mutex ...
- pthread_mutexattr_setpshared (3p)
- set the process-shared attribute
- pthread_mutexattr_setrobust (3p)
- get and set the mutex robust attribute
- pthread_mutexattr_settype (3p)
- set the mutex type attribute
- pthread_once (3p)
- dynamic package initialization
- pthread_rwlock_destroy (3p)
- destroy and initialize a read-write lock object
- pthread_rwlock_rdlock (3p)
- lock a read-write lock object for reading
- pthread_rwlock_timedrdlock (3p)
- lock a read-write lock for reading
- pthread_rwlock_timedwrlock (3p)
- lock a read-write lock for writing
- pthread_rwlock_tryrdlock (3p)
- lock a read-write lock object for reading
- pthread_rwlock_trywrlock (3p)
- lock a read-write lock object for writing
- pthread_rwlock_unlock (3p)
- unlock a read-write lock object
- pthread_rwlock_wrlock (3p)
- lock a read-write lock object for writing
- pthread_rwlockattr_destroy (3p)
- destroy and initialize the read-write lock ...
- pthread_rwlockattr_getpshared (3p)
- get and set the process-shared attribute...
- pthread_rwlockattr_init (3p)
- initialize the read-write lock attributes object
- pthread_rwlockattr_setpshared (3p)
- set the process-shared attribute of the ...
- pthread_self (3)
- obtain ID of the calling thread
- pthread_self (3p)
- get the calling thread ID
- pthread_setaffinity_np (3)
- set/get CPU affinity of a thread
- pthread_setcancelstate (3)
- set cancelability state and type
- pthread_setcancelstate (3p)
- set cancelability state
- pthread_setcanceltype (3)
- set cancelability state and type
- pthread_setconcurrency (3)
- set/get the concurrency level
- pthread_setconcurrency (3p)
- set the level of concurrency
- pthread_setname_np (3)
- set/get the name of a thread
- pthread_setschedparam (3)
- set/get scheduling policy and parameters of a thread
- pthread_setschedparam (3p)
- dynamic thread scheduling parameters access (REA...
- pthread_setschedprio (3)
- set scheduling priority of a thread
- pthread_setschedprio (3p)
- dynamic thread scheduling parameters access (REAL...
- pthread_setspecific (3p)
- thread-specific data management
- pthread_sigmask (3)
- examine and change mask of blocked signals
- pthread_sigmask (3p)
- examine and change blocked signals
- pthread_sigqueue (3)
- queue a signal and data to a thread
- pthread_spin_destroy (3p)
- destroy or initialize a spin lock object
- pthread_spin_lock (3p)
- lock a spin lock object
- pthread_spin_unlock (3p)
- unlock a spin lock object
- pthread_testcancel (3)
- request delivery of any pending cancellation request
- pthread_testcancel (3p)
- set cancelability state
- pthread_timedjoin_np (3)
- try to join with a terminated thread
- pthread_tryjoin_np (3)
- try to join with a terminated thread
- pthread_yield (3)
- yield the processor
- pthreads (7)
- POSIX threads
- pto2mk (1)
- Generate hugin stitching Makefiles
- pto_gen (1)
- Generate a Hugin project file from a list of images.
- pto_merge (1)
- Merges two or more Hugin project files
- ptrace_trap_notify (9)
- schedule trap to notify ptracer
- ptsname (3)
- get the name of the slave pseudoterminal
- ptsname (3p)
- get name of the slave pseudo-terminal device
- ptsname_r (3)
- get the name of the slave pseudoterminal
- pulsar (6x)
- intersecting planes, alpha blending, fog, and textures.
- pulseaudio (1)
- The PulseAudio Sound System
- purge (1)
- magnifying glass into your squid cache
- purifyeps (1)
- make an Encapsulated PostScript file work with both dv...
- putc (3)
- output of characters and strings
- putc_unlocked (3p)
- stdio with explicit client locking
- putchar (3)
- output of characters and strings
- putchar (3p)
- put a byte on a stdout stream
- putchar_unlocked (3)
- nonlocking stdio functions
- putchar_unlocked (3p)
- stdio with explicit client locking
- putenv (3)
- change or add an environment variable
- putenv (3p)
- change or add a value to an environment
- puts (3)
- output of characters and strings
- puts (n)
- Write to a channel
- putspent (3)
- get shadow password file entry
- pututxline (3p)
- put an entry into the user accounting database
- putwc (3)
- write a wide character to a FILE stream
- putwc (3p)
- put a wide character on a stream
- putwchar (3)
- write a wide character to standard output
- putwchar (3p)
- put a wide character on a stdout stream
- putwchar_unlocked (3)
- nonlocking stdio functions
- pvchange (8)
- change attributes of a physical volume
- pvck (8)
- check physical volume metadata
- pvdisplay (8)
- display attributes of a physical volume
- pvmove (8)
- move physical extents
- pvremove (8)
- remove a physical volume
- pvs (8)
- report information about physical volumes
- pvscan (8)
- scan all disks for physical volumes
- pwd (n)
- Return the absolute path of the current working directory
- pwd.h (0p)
- password structure
- pwmconfig (8)
- tests the PWM outputs of sensors and configures fancon...
- pwquality.conf (5)
- configuration for the libpwquality library
- pwunconv (8)
- convert to and from shadow passwords and groups
- pychecker (1)
- program to check python scripts for common mistakes
- pyenv (1)
- Simple Python version management
- python (1)
- an interpreted, interactive, object-oriented programmi...
- python-build (1)
- Simple Python version management
- python2 (1)
- an interpreted, interactive, object-oriented programmi...
- python2.7 (1)
- an interpreted, interactive, object-oriented programmi...
- python3 (1)
- an interpreted, interactive, object-oriented programmi...
- python3.11 (1)
- an interpreted, interactive, object-oriented programmi...
- python3.9 (1)
- an interpreted, interactive, object-oriented programmi...
- qalter (1p)
- alter batch job
- qcatool2 (1)
- command line tool for the Qt Cryptographic Architecture
- qdel (1p)
- delete batch jobs
- qhold (1p)
- hold batch jobs
- qhull (1)
- convex hull, Delaunay triangulation, Voronoi diagram, ...
- qiflush (3ncurses)
- curses input options
- qiflush_sp (3ncurses)
- curses screen-pointer extension
- QLength (3)
- Display macros and functions
- qmove (1p)
- move batch jobs
- qmsg (1p)
- send message to batch jobs
- qrerun (1p)
- rerun batch jobs
- qrls (1p)
- release batch jobs
- qrttoppm (1)
- convert output from the QRT ray tracer to a PPM image
- qselect (1p)
- select batch jobs
- qsig (1p)
- signal batch jobs
- qstat (1p)
- show status of batch jobs
- query_module (2)
- query the kernel for various bits pertaining to modules
- queue_kthread_work (9)
- queue a kthread_work
- queue_me (9)
- Enqueue the futex_q on the futex_hash_bucket
- quick_halt (8)
- stop the system quickly
- quilt (1)
- tool to manage series of patches
- quvi-modules (7)
- Overview of the loadable quvi modules
- quvi-modules-3rdparty (7)
- Overview of the loadable 3rd party modules
- QwtAlphaColorMap (3)
- (unknown subject)
- qwtinstall (3)
- .TH "qwtinstall" 3 "Mon Aug 1 2011" "Version 5.2.2" "Q...
- qwtlicense (3)
- .TH "qwtlicense" 3 "Mon Aug 1 2011" "Version 5.2.2" "Q...
- QwtMathMLTextEngine (3)
- (unknown subject)
- QwtPickerClickPointMachine (3)
- (unknown subject)
- QwtPickerClickRectMachine (3)
- (unknown subject)
- QwtPickerDragPointMachine (3)
- (unknown subject)
- QwtPickerDragRectMachine (3)
- (unknown subject)
- QwtPickerMachine (3)
- (unknown subject)
- QwtPickerPolygonMachine (3)
- (unknown subject)
- QwtRichTextEngine (3)
- (unknown subject)
- QwtScaleArithmetic (3)
- (unknown subject)
- QwtThermo (3)
- (unknown subject)
- QwtWheel (3)
- (unknown subject)
- R (1)
- a language for data analysis and graphics
- radius (8)
- nnrpd RADIUS password authenticator
- radvd.conf (5)
- configuration file of the router advertisement daemon ...
- raise (3)
- send a signal to the caller
- raise (3p)
- send a signal to the executing process
- raise (n)
- Change a window's position in the stacking order
- RAND_add (3osslssl-3)
- add randomness to the PRNG or get its status
- RAND_cleanup (3osslssl-3)
- erase the PRNG state
- RAND_egd (3osslssl-3)
- query entropy gathering daemon
- RAND_egd_bytes (3osslssl-3)
- query entropy gathering daemon
- RAND_event (3osslssl-3)
- add randomness to the PRNG or get its status
- RAND_get0_primary (3osslssl-3)
- get access to the global EVP_RAND_CTX instances
- RAND_get0_private (3osslssl-3)
- get access to the global EVP_RAND_CTX instances
- RAND_get0_public (3osslssl-3)
- get access to the global EVP_RAND_CTX instances
- RAND_get_rand_method (3osslssl-3)
- select RAND method
- RAND_keep_random_devices_open (3osslssl-3)
- add randomness to the PRNG or ge...
- RAND_OpenSSL (3osslssl-3)
- select RAND method
- RAND_poll (3osslssl-3)
- add randomness to the PRNG or get its status
- RAND_query_egd_bytes (3osslssl-3)
- query entropy gathering daemon
- RAND_screen (3osslssl-3)
- add randomness to the PRNG or get its status
- RAND_seed (3osslssl-3)
- add randomness to the PRNG or get its status
- RAND_set_DRBG_type (3osslssl-3)
- specify the global random number generator ...
- RAND_set_rand_method (3osslssl-3)
- select RAND method
- RAND_set_seed_source_type (3osslssl-3)
- specify the global random number gen...
- RAND_status (3osslssl-3)
- add randomness to the PRNG or get its status
- random (n)
- Random channel
- randseed (n)
- Utilities for random channels
- ranlib (1)
- generate an index to an archive
- rarp (8)
- manipulate the system RARP table
- rasqal-config (1)
- script to get information about the installed version ...
- rate_control_send_low (9)
- helper for drivers for management/no-ack frames
- raw (8)
- bind a Linux raw character device
- rawmemchr (3)
- scan memory for a character
- rawshark (1)
- Dump and analyze raw pcap data
- rz (1)
- XMODEM, YMODEM, ZMODEM (Batch) file receive
- RB_FOREACH (3bsd)
- implementations of splay and red-black trees
- RB_FOREACH_REVERSE (3bsd)
- implementations of splay and red-black trees
- RB_HEAD (3bsd)
- implementations of splay and red-black trees
- RB_RIGHT (3bsd)
- implementations of splay and red-black trees
- rbash (1)
- restricted bash, see bash(1)
- rbox (1)
- generate point distributions for qhull
- rc4 (n)
- Implementation of the RC4 stream cipher
- rcs (1)
- change attributes
- rcs2log (1)
- RCS to ChangeLog generator
- rcu_barrier (9)
- Wait until all in-flight call_rcu callbacks complete.
- rcu_barrier_bh (9)
- Wait until all in-flight call_rcu_bh callbacks complete.
- rcu_barrier_sched (9)
- Wait for in-flight call_rcu_sched callbacks.
- rcu_idle_enter (9)
- inform RCU that current CPU is entering idle
- rcu_idle_exit (9)
- inform RCU that current CPU is leaving idle
- rcu_is_watching (9)
- see if RCU thinks that the current CPU is idle
- rcu_read_lock_bh_held (9)
- might we be in RCU-bh read-side critical section?
- rdma_create_event_channel (3)
- Open a channel used to report communication e...
- rdma_create_srq (3)
- Allocate a shared receive queue.
- rdma_destroy_event_channel (3)
- Close an event communication channel.
- rdma_disconnect (3)
- This function disconnects a connection.
- rdma_free_devices (3)
- Frees the list of devices returned by rdma_get_devices.
- rdma_get_cm_event (3)
- Retrieves the next pending communication event.
- rdma_get_dst_port (3)
- Returns the remote port number of a bound rdma_cm_id.
- rdma_get_local_addr (3)
- Returns the local IP address of a bound rdma_cm_id.
- rdma_get_peer_addr (3)
- Returns the remote IP address of a bound rdma_cm_id.
- rdma_get_request (3)
- Retrieves the next pending connection request event.
- rdma_get_src_port (3)
- Returns the local port number of a bound rdma_cm_id.
- rdma_migrate_id (3)
- Move a communication identifer to a different event ch...
- rdma_notify (3)
- Notifies the librdmacm of an asynchronous event.
- rdma_resolve_route (3)
- Resolve the route information needed to establish a ...
- re (3)
- Perl pragma to alter regular expression behaviour
- read (n)
- Read from a channel
- read_abs_bbt (9)
- [GENERIC] Read the bad block table starting at a given...
- read_abs_bbts (9)
- [GENERIC] Read the bad block table(s) for all chips st...
- read_bbt (9)
- [GENERIC] Read the bad block table starting from page
- read_cache_page (9)
- read into page cache, fill it if needed
- read_cache_page_gfp (9)
- read into page cache, using specified page allocati...
- read_cache_pages (9)
- populate an address space with some pages & start read...
- readahead (2)
- initiate file readahead into page cache
- readfile (3am)
- return the entire contents of a file as a string
- readline (3)
- get a line from a user with editing
- readlink (3p)
- read the contents of a symbolic link
- readlink_by_handle (3)
- file handle operations
- readonly (1p)
- set the readonly attribute for variables
- readpassphrase (3bsd)
- get a passphrase from the user
- reallocate_resource (9)
- allocate a slot in the resource tree given range & ...
- realpath (1)
- print the resolved path
- realpath (3)
- return the canonicalized absolute pathname
- realpath (3p)
- resolve a pathname
- REASSIGN_OWNED (7pg161)
- change the ownership of database objects owned by a...
- reboot (8)
- Halt, power-off or reboot the machine
- rebuild-gcj-db-4.9 (1)
- Merge the per-solib databases made by aot-compile in...
- rebuild-jar-repository (1)
- rebuild a JAR repository based on the current JVM
- recno (3)
- record number database access method
- recountdiff (1)
- recompute patch counts and offsets
- recover (6)
- recover a NetHack game interrupted by disaster
- recursive_session_key_scan (3)
- Apply a function to all keys in the session ...
- rediff (1)
- fix offsets and counts of a hand-edited diff
- redland-config (1)
- script to get information about the installed version ...
- redrawwin (3ncurses)
- refresh curses windows and lines
- refchan (n)
- command handler API of reflected channels
- refer (1)
- preprocess bibliographic references for groff
- refresh (3ncurses)
- refresh curses windows and lines
- REFRESH_MATERIALIZED_VIEW (7pg161)
- replace the contents of a materialized view
- regcomp (3p)
- regular expression matching
- regex.h (0p)
- regular expression matching types
- regexp (n)
- Match a regular expression against a string
- register_adapter_interrupt (9)
- register adapter interrupt handler
- register_app_config_handler (3)
- netsnmp_config_api functions
- register_app_prenetsnmp_mib_handler (3)
- netsnmp_config_api functions
- register_chrdev_region (9)
- register a range of device numbers
- register_config_handler (3)
- netsnmp_config_api functions
- register_const_config_handler (3)
- netsnmp_config_api functions
- register_mib_handlers (3)
- netsnmp_config_api functions
- register_prenetsnmp_mib_handler (3)
- netsnmp_config_api functions
- register_security (9)
- registers a security framework with the kernel
- registry (7)
- The JavaScript Package Registry
- registry (n)
- Manipulate the Windows registry
- regpatch (1)
- Applies registry patches to registry files
- regshell (1)
- Windows registry file browser using readline
- regulator_allow_bypass (9)
- allow the regulator to go into bypass mode
- regulator_can_change_voltage (9)
- check if regulator can change voltage
- regulator_disable_deferred (9)
- disable regulator output with delay
- regulator_get_linear_step (9)
- return the voltage step size between VSEL values
- regulator_has_full_constraints (9)
- the system has fully specified constraints
- regulator_is_enabled (9)
- is the regulator output enabled
- regulator_is_supported_voltage (9)
- check if a voltage range can be supported
- regulator_notifier_call_chain (9)
- call regulator event notifier
- regulator_put (9)
- "free" the regulator source
- regulator_suspend_finish (9)
- resume regulators from system wide suspend
- regulatory_hint (9)
- driver hint to the wireless core a regulatory domain
- rehash (1osslssl-3)
- OpenSSL application commands
- relay_alloc_buf (9)
- allocate a channel buffer
- relay_buf_empty (9)
- boolean, is the channel buffer empty?
- relay_buf_full (9)
- boolean, is the channel buffer full?
- relay_close (9)
- close the channel
- relay_close_buf (9)
- close a channel buffer
- relay_create_buf (9)
- allocate and initialize a channel buffer
- relay_destroy_buf (9)
- destroy an rchan_buf struct and associated buffer
- relay_destroy_channel (9)
- free the channel struct
- relay_file_read_end_pos (9)
- return the new read position
- relay_file_read_start_pos (9)
- find the first available byte to read
- relay_flush (9)
- close the channel
- relay_hotcpu_callback (9)
- CPU hotplug callback
- relay_mmap_buf (9)
- mmap channel buffer to process address space
- relay_open (9)
- create a new relay channel
- relay_remove_buf (9)
- remove a channel buffer
- relay_reset (9)
- reset the channel
- relay_subbufs_consumed (9)
- update the buffer's sub-buffers-consumed count
- relay_switch_subbuf (9)
- switch to a new sub-buffer
- release_firmware (9)
- release the resource associated with a firmware image
- urxvt-remote-clipboard-256color (1)
- manage a shared and possibly remote cli...
- removable_context (5)
- The SELinux removable devices context configuration file
- removal (7)
- Cleaning the Slate
- rename (2)
- change the name or location of a file
- renameat (2)
- change the name or location of a file
- renameat2 (2)
- change the name or location of a file
- rendercheck (1)
- simple tests of the X Render extension.
- repertoiremap (5)
- map symbolic character names to Unicode code points
- replace_page_cache_page (9)
- replace a pagecache page with a new one
- request-key (8)
- Handle key instantiation callback requests from the ke...
- request-key.conf (5)
- Instantiation handler configuration file
- request_dma (9)
- request and reserve a system DMA channel
- request_firmware_direct (9)
- load firmware directly without usermode helper
- request_firmware_nowait (9)
- asynchronous version of request_firmware
- request_key (2)
- request a key from the kernel's key management facility
- request_threaded_irq (9)
- allocate an interrupt line
- requestname (3form)
- handle printable form request names
- requestname (3menu)
- handle printable menu request names
- requeue_futex (9)
- Requeue a futex_q from one hb to another
- requeue_pi_wake_futex (9)
- Wake a task that acquired the lock during requeue
- res_search (3)
- resolver routines
- reset_shell_mode (3ncurses)
- low-level curses routines
- reset_shell_mode_sp (3ncurses)
- curses screen-pointer extension
- resize_term (3ncurses)
- change the curses terminal size
- resizecons (8)
- change kernel idea of the console size
- resizepart (8)
- simple wrapper around the "resize partition" ioctl
- resizeterm (3ncurses)
- change the curses terminal size
- resolv+ (8)
- enhanced DNS resolver library
- resolveip (1)
- resolve host name to IP address or vice versa
- rest (n)
- define REST web APIs and call them inline or asychrono...
- restorecond (8)
- daemon that watches for file creation and then sets th...
- rev (1)
- reverse lines characterwise
- revpath (1)
- generate a relative path that can be used to undo a ch...
- rewind (3p)
- reset the file position indicator in a stream
- rewinddir (3p)
- reset the position of a directory stream to the beginn...
- rgb3toppm (1)
- combine three PGM images (R, G, B) into one PPM image
- rhash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- rhosts (5)
- grants or denies password-free r-command access to a s...
- richtext (1)
- View a richtext document, typically a mail message
- rindex (3)
- locate character in string
- ripd (8)
- a RIP routing engine for use with Quagga routing softw...
- ripemd128 (n)
- RIPEMD-128 Message-Digest Algorithm
- ripemd160 (n)
- RIPEMD-160 Message-Digest Algorithm
- RIPEMD160_Final (3osslssl-3)
- RIPEMD-160 hash function
- RIPEMD160_Init (3osslssl-3)
- RIPEMD-160 hash function
- RIPEMD160_Update (3osslssl-3)
- RIPEMD-160 hash function
- ripngd (8)
- a RIPNG routing engine for use with Quagga routing sof...
- rksh (1ast)
- shell, the standard/restricted command and programming...
- rletopnm (1)
- convert a Utah Raster Tools RLE image file to a PNM im...
- rlog (1)
- print log messages and other information about s
- rmic-java-1.7.0-openjdk (1)
- The Java RMI Compiler
- rmid (1)
- Starts the activation system daemon that enables objec...
- rmid-java-1.7.0-openjdk (1)
- The Java RMI Activation System Daemon
- rmid-java-1.8.0-openjdk (1)
- Starts the activation system daemon that enable...
- rmiregistry (1)
- Starts a remote object registry on the specified port ...
- rmiregistry-java-1.7.0-openjdk (1)
- The Java Remote Object Registry
- rmiregistry-java-1.8.0-openjdk (1)
- Starts a remote object registry on the s...
- rmmod (8)
- Simple program to remove a module from the Linux Kernel
- rnews (1)
- Inject individual articles and UUCP batches into INN
- rngd (8)
- Check and feed random data from hardware device to ker...
- rngtest (1)
- Check the randomness of data using FIPS 140-2 tests
- robots (6)
- fight off villainous robots
- rocks (6x)
- animation of flying through an asteroid field
- roff (7)
- concepts and history of roff typesetting
- roff2html (1)
- transform roff code into html mode
- ROLLBACK (7pg161)
- abort the current transaction
- ROLLBACK_PREPARED (7pg161)
- cancel a transaction that was earlier prepared f...
- roma (1)
- compile a TEI ODD specification into schemas and dtd
- rorschach (6x)
- simulate ink-blot patterns
- rot13 (6)
- decrypt caesar ciphers
- rotatelogs (8)
- Piped logging program to rotate Apache logs
- rotzoomer (6x)
- animated rotations and scalings of portions of the screen
- round (3p)
- round to the nearest integer value in a floating-point...
- route (8)
- show / manipulate the IP routing table
- route.conf (5)
- Configuration for routing table has changed
- routef (8)
- flush routes
- routel (8)
- list routes with pretty output format
- routes (5)
- configure the interface static routing tables
- rpc.dracd (8)
- Dynamic Relay Authorization Control server
- RPC::XML (3pm)
- A set of classes for core data, message and XML handling
- rpc_call_async (9)
- Perform an asynchronous RPC call
- rpc_call_sync (9)
- Perform a synchronous RPC call
- rpc_clone_client_set_auth (9)
- Clone an RPC client structure and set its auth
- rpc_create (9)
- create an RPC client and transport with one call
- rpc_force_rebind (9)
- force transport to check that remote port is unchanged
- rpc_get_timeout (9)
- Get timeout for transport in units of HZ
- rpc_init_pipe_dir_head (9)
- initialise a struct rpc_pipe_dir_head
- rpc_net_ns (9)
- Get the network namespace for this RPC client
- rpc_run_task (9)
- Allocate a new RPC task, then run rpc_execute against it
- rpc_svc_create (3t)
- library routines for the creation of server handles
- rpc_switch_client_transport (9)
- (unknown subject)
- rpc_wake_up_status (9)
- wake up all rpc_tasks and set their status value.
- rpcb_getport_async (9)
- obtain the port for a given RPC service on a given host
- rpm2cpio (8)
- Extract cpio archive from RPM Package Manager (RPM) pa...
- rpm_execcon (3)
- get or set the SELinux security context used for execu...
- rpmatch (3)
- determine if the answer to a question is affirmative o...
- rpmdb2solv (1)
- convert the rpm database into a solv file
- rpmgraph (8)
- Display RPM Package Dependency Graph
- rpmqpack (8)
- check for installed rpm packages
- rps_may_expire_flow (9)
- check whether an RFS hardware filter may be removed
- rq_flush_dcache_pages (9)
- Helper function to flush all pages in a request
- RSA-PSS (7osslssl-3)
- EVP_PKEY RSA-PSS algorithm support
- RSA_blinding_off (3osslssl-3)
- protect the RSA operation from timing attacks
- RSA_blinding_on (3osslssl-3)
- protect the RSA operation from timing attacks
- RSA_check_key (3osslssl-3)
- validate private RSA keys
- RSA_check_key_ex (3osslssl-3)
- validate private RSA keys
- RSA_flags (3osslssl-3)
- select RSA method
- RSA_get_default_method (3osslssl-3)
- select RSA method
- RSA_get_method (3osslssl-3)
- select RSA method
- RSA_meth_dup (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_free (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get0_app_data (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get0_name (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_bn_mod_exp (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_finish (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_flags (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_init (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_keygen (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_mod_exp (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_multi_prime_keygen (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_priv_dec (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_priv_enc (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_pub_dec (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_pub_enc (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_sign (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_get_verify (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_new (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set0_app_data (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set1_name (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_bn_mod_exp (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_finish (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_flags (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_init (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_keygen (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_mod_exp (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_multi_prime_keygen (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_priv_dec (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_priv_enc (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_pub_dec (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_pub_enc (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_sign (3osslssl-3)
- Routines to build up RSA methods
- RSA_meth_set_verify (3osslssl-3)
- Routines to build up RSA methods
- RSA_new_method (3osslssl-3)
- select RSA method
- RSA_padding_check_none (3osslssl-3)
- asymmetric encryption padding
- RSA_padding_check_PKCS1_OAEP (3osslssl-3)
- asymmetric encryption padding
- RSA_padding_check_PKCS1_OAEP_mgf1 (3osslssl-3)
- asymmetric encryption padding
- RSA_padding_check_PKCS1_type_1 (3osslssl-3)
- asymmetric encryption padding
- RSA_padding_check_PKCS1_type_2 (3osslssl-3)
- asymmetric encryption padding
- RSA_PKCS1_OpenSSL (3osslssl-3)
- select RSA method
- RSA_print (3osslssl-3)
- print cryptographic parameters
- RSA_print_fp (3osslssl-3)
- print cryptographic parameters
- RSA_private_decrypt (3osslssl-3)
- RSA public key cryptography
- RSA_public_encrypt (3osslssl-3)
- RSA public key cryptography
- RSA_set_default_method (3osslssl-3)
- select RSA method
- RSA_set_method (3osslssl-3)
- select RSA method
- Rscript (1)
- front end for scripting with R
- rsh (1)
- remote shell
- rstartd (1)
- a sample implementation of a Remote Start rsh helper
- rt_sigaction (2)
- examine and change a signal action
- rt_sigprocmask (2)
- examine and change blocked signals
- rt_sigreturn (2)
- return from signal handler and cleanup stack frame
- rt_sigsuspend (2)
- examine and change a signal action
- rt_sigtimedwait (2)
- synchronously wait for queued signals
- rtime (3)
- get time from a remote machine
- rtkitctl (8)
- Realtime Policy and Watchdog daemon control
- rtld-audit (7)
- auditing API for the dynamic linker
- rubik (6x)
- screen saver that solves Rubik's Cube.
- rubikblocks (6x)
- animates the Rubik's Mirror Blocks puzzle
- run-with-aspell (1)
- script to help use GNU Aspell as an ispell replacement
- run_init (8)
- run an init script in the proper SELinux context
- runcon (1)
- run command with specified security context
- runuser (1)
- run a command with substitute user and group ID
- rustc (1)
- The Rust compiler
- sa-check_spamd (1)
- spamd monitoring script for use with Nagios, etc.
- sail (6)
- multi-user wooden ships and iron men
- samba-bgqd (8)
- This is an internal helper program performing asynchro...
- samba-dcerpcd (8)
- This is one of Samba's DCERPC server processes that ca...
- samba-regedit (8)
- ncurses based tool to manage the Samba registry
- sanitize_inquiry_string (9)
- remove non-graphical chars from an INQUIRY resu...
- sas_attach_transport (9)
- instantiate SAS transport template
- sas_end_device_alloc (9)
- allocate an rphy for an end device
- sas_expander_alloc (9)
- allocate an rphy for an end device
- sas_phy_add (9)
- add a SAS PHY to the device hierarchy
- sas_phy_alloc (9)
- allocates and initialize a SAS PHY structure
- sas_phy_delete (9)
- remove SAS PHY
- sas_phy_free (9)
- free a SAS PHY
- sas_port_add (9)
- add a SAS port to the device hierarchy
- sas_port_add_phy (9)
- add another phy to a port to form a wide port
- sas_port_delete_phy (9)
- remove a phy from a port or wide port
- sas_port_get_phy (9)
- try to take a reference on a port member
- sas_remove_children (9)
- tear down a devices SAS data structures
- sas_remove_host (9)
- tear down a Scsi_Host's SAS data structures
- sas_rphy_add (9)
- add a SAS remote PHY to the device hierarchy
- sas_rphy_delete (9)
- remove and free SAS remote PHY
- sas_rphy_free (9)
- free a SAS remote PHY
- sas_rphy_remove (9)
- remove SAS remote PHY
- sas_rphy_unlink (9)
- unlink SAS remote PHY
- sas_tlr_supported (9)
- checking TLR bit in vpd 0x90
- sash (1)
- stand-alone shell with built-in commands
- sasl_authorize_t (3)
- The SASL authorization callback
- sasl_auxprop (3)
- How to work with SASL auxiliary properties
- sasl_callbacks (3)
- How to work with SASL callbacks
- sasl_chalprompt_t (3)
- Realm Acquisition Callback
- sasl_checkapop (3)
- Check an APOP challenge/response
- sasl_checkpass (3)
- Check a plaintext password
- sasl_client_init (3)
- SASL client authentication initialization
- sasl_client_new (3)
- Create a new client authentication object
- sasl_client_start (3)
- Begin an authentication negotiation
- sasl_client_step (3)
- Perform a step in the authentication negotiation
- sasl_encode (3)
- Encode data for transport to authenticated host
- sasl_encodev (3)
- Encode data for transport to authenticated host
- sasl_errstring (3)
- Translate a SASL return code to a human-readable form
- sasl_getconfpath_t (3)
- The SASL callback to indicate location of the config...
- sasl_getopt_t (3)
- The SASL get option callback
- sasl_getpath_t (3)
- The SASL callback to indicate location of the mechanis...
- sasl_getsecret_t (3)
- The SASL callback for secrets (passwords)
- sasl_getsimple_t (3)
- The SASL callback for username/authname/realm
- sasl_global_listmech (3)
- Retrieve a list of the supported SASL mechanisms
- sasl_listmech (3)
- Retrieve a list of the supported SASL mechanisms
- sasl_log_t (3)
- The SASL logging callback
- sasl_server_init (3)
- SASL server authentication initialization
- sasl_server_new (3)
- Create a new server authentication object
- sasl_server_start (3)
- Begin an authentication negotiation
- sasl_server_step (3)
- Perform a step in the authentication negotiation
- sasl_server_userdb_checkpass_t (3)
- Plaintext Password Verification Callback
- sasl_setpass (3)
- Check a plaintext password
- sasl_user_exists (3)
- Check if a user exists on server
- sasl_verifyfile_t (3)
- The SASL file verification
- saslauthd (8)
- sasl authentication server
- sata_link_debounce (9)
- debounce SATA phy status
- sata_link_hardreset (9)
- reset link via SATA phy reset
- sata_scr_read (9)
- read SCR register of the specified port
- sata_scr_valid (9)
- test whether SCRs are accessible
- sata_scr_write (9)
- write SCR register of the specified port
- sata_scr_write_flush (9)
- write SCR register of the specified port and flush
- sata_std_hardreset (9)
- COMRESET w/o waiting or classification
- SAVEPOINT (7pg161)
- define a new savepoint within the current transaction
- sbrk (2)
- change data segment size
- scache (8)
- Postfix shared connection cache server
- scan (n)
- Parse string using conversion specifiers in the style ...
- scandir (3)
- scan a directory for matching entries
- scandirat (3)
- scan a directory for matching entries
- scatterscreenshots (3)
- .TH "scatterscreenshots" 3 "Mon Aug 1 2011" "Version...
- sccmap (1)
- extract strongly connected components of directed graphs
- sccs (1p)
- front end for the SCCS subsystem (DEVELOPMENT)
- scdaemon (1)
- Smartcard daemon for the GnuPG system
- sched (7)
- overview of scheduling APIs
- sched.h (0p)
- execution scheduling
- sched_get_priority_max (2)
- get static priority range
- sched_get_priority_max (3p)
- get priority limits (REALTIME)
- sched_get_priority_min (2)
- get static priority range
- sched_getaffinity (2)
- set and get a thread's CPU affinity mask
- sched_getattr (2)
- set and get scheduling policy and attributes
- sched_getcpu (3)
- determine CPU on which the calling thread is running
- sched_getparam (2)
- set and get scheduling parameters
- sched_getparam (3p)
- get scheduling parameters (REALTIME)
- sched_getscheduler (2)
- set and get scheduling policy/parameters
- sched_getscheduler (3p)
- get scheduling policy (REALTIME)
- sched_rr_get_interval (2)
- get the SCHED_RR interval for the named process
- sched_rr_get_interval (3p)
- get execution time limits (REALTIME)
- sched_setaffinity (2)
- set and get a thread's CPU affinity mask
- sched_setattr (2)
- set and get scheduling policy and attributes
- sched_setparam (2)
- set and get scheduling parameters
- sched_setparam (3p)
- set scheduling parameters (REALTIME)
- sched_setscheduler (2)
- set and get scheduling policy/parameters
- sched_setscheduler (3p)
- set scheduling policy and parameters (REALTIME)
- sched_setscheduler (9)
- change the scheduling policy and/or RT priority of a...
- sched_yield (2)
- yield the processor
- sched_yield (3p)
- yield the processor
- schedule_hrtimeout (9)
- sleep until timeout
- schedule_hrtimeout_range (9)
- sleep until timeout
- schedule_timeout (9)
- sleep until timeout
- schemagen (1)
- Generates a schema for every name space that is refere...
- schemagen-java-1.7.0-openjdk (1)
- Java(TM) Architecture for XML Binding Sche...
- schemagen-java-1.8.0-openjdk (1)
- Generates a schema for every name space th...
- scp (1)
- OpenSSH secure file copy
- SCPNT_TO_LOOKUP_IDX (9)
- searches for a given scmd in the ScsiLookup[] array...
- screen (1)
- screen manager with VT100/ANSI terminal emulation
- screendump (1)
- dump the contents of a virtual console to stdout
- ScreenWhitePointOfCCC (3)
- Color Conversion Context macros
- scripts (7)
- How npm handles the "scripts" field
- scrollkeeper-rebuilddb (8)
- rebuild the scrollkeeper document catalog database
- scsi_10_lba_len (9)
- Get LBA and transfer length
- scsi_16_lba_len (9)
- Get LBA and transfer length
- scsi_6_lba_len (9)
- Get LBA and transfer length
- scsi_add_host_with_dma (9)
- add a scsi host with dma device
- scsi_adjust_queue_depth (9)
- Let low level drivers change a device's queue d...
- scsi_block_when_processing_errors (9)
- Prevent cmds from being queued.
- scsi_complete_async_scans (9)
- Wait for asynchronous scans to complete
- scsi_dev_info_list_add_str (9)
- parse dev_list and add to the scsi_dev_info_...
- scsi_device_lookup (9)
- find a device given the host
- scsi_device_lookup_by_target (9)
- find a device given the target
- scsi_device_set_state (9)
- Take the given device through the device state mo...
- scsi_device_type (9)
- Return 17 char string indicating device type.
- scsi_eh_finish_cmd (9)
- Handle a cmd that eh is finished with.
- scsi_eh_flush_done_q (9)
- finish processed commands or retry them.
- scsi_eh_get_sense (9)
- Get device sense data.
- scsi_eh_prep_cmnd (9)
- Save a scsi command info as part of error recovery
- scsi_eh_ready_devs (9)
- check device ready state and recover if not.
- scsi_eh_restore_cmnd (9)
- Restore a scsi command info as part of error recovery
- scsi_execute (9)
- insert request and wait for the result
- scsi_exit_devinfo (9)
- remove /proc/scsi/device_info & the scsi_dev_info_list
- scsi_finish_async_scan (9)
- asynchronous scan has finished
- scsi_finish_command (9)
- cleanup and pass command back to upper layer
- scsi_flush_work (9)
- Flush a Scsi_Host's workqueue.
- scsi_get_device_flags (9)
- get device specific flags from the dynamic device...
- scsi_get_sense_info_fld (9)
- get information field from sense data (either f...
- scsi_host_alloc (9)
- register a scsi host adapter instance.
- scsi_host_get (9)
- inc a Scsi_Host ref count
- scsi_host_lookup (9)
- get a reference to a Scsi_Host by host no
- scsi_host_put (9)
- dec a Scsi_Host ref count
- scsi_host_set_state (9)
- Take the given host through the host state model.
- scsi_init_devinfo (9)
- set up the dynamic device list.
- scsi_ioctl (9)
- Dispatch ioctl to scsi device
- scsi_is_sas_phy (9)
- check if a struct device represents a SAS PHY
- scsi_is_sas_port (9)
- check if a struct device represents a SAS port
- scsi_is_sas_rphy (9)
- check if a struct device represents a SAS remote PHY
- scsi_mandat (8)
- check SCSI device support for mandatory commands
- scsi_netlink_exit (9)
- Called by SCSI subsystem to disable the SCSI transpor...
- scsi_netlink_init (9)
- Called by SCSI subsystem to initialize the SCSI trans...
- scsi_nl_rcv_msg (9)
- Receive message handler.
- scsi_nonblockable_ioctl (9)
- Handle SG_SCSI_RESET
- scsi_normalize_sense (9)
- normalize main elements from either fixed or descr...
- scsi_partsize (9)
- Parse cylinders/heads/sectors from PC partition table
- scsi_proc_host_add (9)
- Add entry for this host to appropriate /proc dir
- scsi_proc_host_rm (9)
- remove this host's entry from /proc
- scsi_proc_hostdir_add (9)
- Create directory in /proc for a scsi host
- scsi_proc_hostdir_rm (9)
- remove directory in /proc for a scsi host
- scsi_queue_work (9)
- Queue work to the Scsi_Host workqueue.
- scsi_remove_device (9)
- unregister a device from the scsi bus
- scsi_remove_host (9)
- remove a scsi host
- scsi_satl (8)
- check SCSI to ATA Translation (SAT) device support
- scsi_schedule_eh (9)
- schedule EH for SCSI host
- scsi_sense_desc_find (9)
- search for a given descriptor type in descriptor s...
- scsi_target_reap (9)
- check to see if target is in use and destroy if not
- scsi_temperature (8)
- fetch the temperature of a SCSI device
- scsi_track_queue_full (9)
- track QUEUE_FULL events to adjust queue depth
- scsicam_bios_param (9)
- Determine geometry of a disk in cylinders/heads/sect...
- SCT_get_validation_status (3osslssl-3)
- checks Signed Certificate Timestamps...
- SCT_LIST_print (3osslssl-3)
- Prints Signed Certificate Timestamps in a human...
- SCT_LIST_validate (3osslssl-3)
- checks Signed Certificate Timestamps (SCTs) ...
- SCT_print (3osslssl-3)
- Prints Signed Certificate Timestamps in a human-read...
- SCT_validate (3osslssl-3)
- checks Signed Certificate Timestamps (SCTs) are v...
- sctp_peeloff (3)
- Branch off an association into a separate socket.
- sd-readahead (3)
- Reference implementation of APIs for controlling boot-...
- sd_booted (3)
- Test whether the system is running the systemd init sy...
- sd_get_machine_names (3)
- Determine available seats, sessions, logged in use...
- sd_id128_get_machine (3)
- Retrieve 128-bit IDs
- sd_is_fifo (3)
- Check the type of a file descriptor
- sd_is_mq (3)
- Check the type of a file descriptor
- sd_is_socket (3)
- Check the type of a file descriptor
- sd_is_socket_inet (3)
- Check the type of a file descriptor
- sd_is_socket_unix (3)
- Check the type of a file descriptor
- sd_is_special (3)
- Check the type of a file descriptor
- sd_journal (3)
- Open the system journal for reading
- sd_journal_add_conjunction (3)
- Add or remove entry matches
- sd_journal_add_disjunction (3)
- Add or remove entry matches
- sd_journal_add_match (3)
- Add or remove entry matches
- SD_JOURNAL_APPEND (3)
- Journal change notification interface
- sd_journal_close (3)
- Open the system journal for reading
- SD_JOURNAL_CURRENT_USER (3)
- Open the system journal for reading
- sd_journal_enumerate_data (3)
- Read data fields from the current journal entry
- sd_journal_enumerate_unique (3)
- Read unique data fields from the journal
- sd_journal_flush_matches (3)
- Add or remove entry matches
- SD_JOURNAL_FOREACH (3)
- Advance or set back the read pointer in the journal
- SD_JOURNAL_FOREACH_BACKWARDS (3)
- Advance or set back the read pointer in th...
- SD_JOURNAL_FOREACH_DATA (3)
- Read data fields from the current journal entry
- SD_JOURNAL_FOREACH_UNIQUE (3)
- Read unique data fields from the journal
- sd_journal_get_cutoff_monotonic_usec (3)
- Read cut-off timestamps from the c...
- sd_journal_get_cutoff_realtime_usec (3)
- Read cut-off timestamps from the cu...
- sd_journal_get_data (3)
- Read data fields from the current journal entry
- sd_journal_get_data_threshold (3)
- Read data fields from the current journal...
- sd_journal_get_events (3)
- Journal change notification interface
- sd_journal_get_fd (3)
- Journal change notification interface
- sd_journal_get_monotonic_usec (3)
- Read timestamps from the current journal ...
- sd_journal_get_realtime_usec (3)
- Read timestamps from the current journal e...
- sd_journal_get_timeout (3)
- Journal change notification interface
- SD_JOURNAL_INVALIDATE (3)
- Journal change notification interface
- SD_JOURNAL_LOCAL_ONLY (3)
- Open the system journal for reading
- sd_journal_next (3)
- Advance or set back the read pointer in the journal
- sd_journal_next_skip (3)
- Advance or set back the read pointer in the journal
- SD_JOURNAL_NOP (3)
- Journal change notification interface
- sd_journal_open (3)
- Open the system journal for reading
- sd_journal_open_container (3)
- Open the system journal for reading
- sd_journal_open_directory (3)
- Open the system journal for reading
- sd_journal_open_files (3)
- Open the system journal for reading
- sd_journal_perror (3)
- Submit log entries to the journal
- sd_journal_previous (3)
- Advance or set back the read pointer in the journal
- sd_journal_previous_skip (3)
- Advance or set back the read pointer in the jo...
- sd_journal_print (3)
- Submit log entries to the journal
- sd_journal_printv (3)
- Submit log entries to the journal
- sd_journal_process (3)
- Journal change notification interface
- sd_journal_query_unique (3)
- Read unique data fields from the journal
- sd_journal_reliable_fd (3)
- Journal change notification interface
- sd_journal_restart_data (3)
- Read data fields from the current journal entry
- sd_journal_restart_unique (3)
- Read unique data fields from the journal
- SD_JOURNAL_RUNTIME_ONLY (3)
- Open the system journal for reading
- sd_journal_seek_cursor (3)
- Seek to a position in the journal
- sd_journal_seek_head (3)
- Seek to a position in the journal
- sd_journal_seek_monotonic_usec (3)
- Seek to a position in the journal
- sd_journal_seek_realtime_usec (3)
- Seek to a position in the journal
- sd_journal_seek_tail (3)
- Seek to a position in the journal
- sd_journal_send (3)
- Submit log entries to the journal
- sd_journal_sendv (3)
- Submit log entries to the journal
- sd_journal_set_data_threshold (3)
- Read data fields from the current journal...
- sd_journal_stream_fd (3)
- Create log stream file descriptor to the journal
- SD_JOURNAL_SUPPRESS_LOCATION (3)
- Submit log entries to the journal
- SD_JOURNAL_SYSTEM (3)
- Open the system journal for reading
- sd_journal_wait (3)
- Journal change notification interface
- sd_listen_fds (3)
- Check for file descriptors passed by the system manager
- SD_LISTEN_FDS_START (3)
- Check for file descriptors passed by the system man...
- sd_login_monitor (3)
- Monitor login sessions, seats, users and virtual machi...
- sd_login_monitor_flush (3)
- Monitor login sessions, seats, users and virtual...
- sd_pid_get_machine_name (3)
- Determine session, service, owner of a session,...
- sd_readahead (3)
- Control ongoing disk boot-time read-ahead operations
- sd_seat_can_graphical (3)
- Determine state of a specific seat
- sd_session_get_remote_host (3)
- Determine state of a specific session
- sd_watchdog_enabled (3)
- Check whether the service manager expects watchdog ...
- sdev_evt_send (9)
- send asserted event to uevent thread
- sdev_evt_send_simple (9)
- send asserted event to uevent thread
- SDL_AddTimer (3)
- Add a timer which will call a callback after the speci...
- SDL_BlitSurface (3)
- This performs a fast blit from the source surface to t...
- SDL_CDClose (3)
- Closes a SDL_CD handle
- SDL_CDName (3)
- Returns a human-readable, system-dependent identifier ...
- SDL_CDNumDrives (3)
- Returns the number of CD-ROM drives on the system.
- SDL_CDPlayTracks (3)
- Play the given CD track(s)
- SDL_CDStatus (3)
- Returns the current status of the given drive.
- SDL_CloseAudio (3)
- Shuts down audio processing and closes the audio device.
- SDL_CondBroadcast (3)
- Restart all threads waiting on a condition variable
- SDL_CondSignal (3)
- Restart a thread wait on a condition variable
- SDL_CondWaitTimeout (3)
- Wait on a condition variable, with timeout
- SDL_ConvertSurface (3)
- Converts a surface to the same format as another sur...
- SDL_CreateSemaphore (3)
- Creates a new semaphore and assigns an initial valu...
- SDL_CreateThread (3)
- Creates a new thread of execution that shares its pare...
- SDL_DestroySemaphore (3)
- Destroys a semaphore that was created by SDL_Creat...
- SDL_DisplayFormat (3)
- Convert a surface to the display format
- SDL_DisplayFormatAlpha (3)
- Convert a surface to the display format
- SDL_DisplayYUVOverlay (3)
- Blit the overlay to the display
- SDL_EventState (3)
- This function allows you to set the state of processin...
- SDL_FillRect (3)
- This function performs a fast fill of the given rectan...
- SDL_FreeCursor (3)
- Frees a cursor created with SDL_CreateCursor.
- SDL_RWFromFile (3)
- Short description of function
- SDL_GetAppState (3)
- Get the state of the application
- SDL_GetAudioStatus (3)
- Get the current audio state
- SDL_GetClipRect (3)
- Gets the clipping rectangle for a surface.
- SDL_GetCursor (3)
- Get the currently active mouse cursor.
- SDL_GetEventFilter (3)
- Retrieves a pointer to he event filter
- SDL_GetGamma (3)
- Gets the gamma of the display
- SDL_GetGammaRamp (3)
- Gets the color gamma lookup tables for the display
- SDL_GetKeyName (3)
- Get the name of an SDL virtual keysym
- SDL_GetKeyState (3)
- Get a snapshot of the current keyboard state
- SDL_GetModState (3)
- Get the state of modifier keys.
- SDL_GetMouseState (3)
- Retrieve the current state of the mouse
- SDL_GetRelativeMouseState (3)
- Retrieve the current state of the mouse
- SDL_GetRGB (3)
- Get RGB values from a pixel in the specified pixel for...
- SDL_GetRGBA (3)
- Get RGBA values from a pixel in the specified pixel fo...
- SDL_GetThreadID (3)
- Get the SDL thread ID of a SDL_Thread
- SDL_GetTicks (3)
- Get the number of milliseconds since the SDL library i...
- SDL_GetVideoInfo (3)
- returns a pointer to information about the video hardware
- SDL_GetVideoSurface (3)
- returns a pointer to the current display surface
- SDL_GL_GetAttribute (3)
- Get the value of a special SDL/OpenGL attribute
- SDL_GL_GetProcAddress (3)
- Get the address of a GL function
- SDL_JoyHatEvent (3)
- Joystick hat position change event structure
- SDL_JoystickGetAxis (3)
- Get the current state of an axis
- SDL_JoystickGetButton (3)
- Get the current state of a given button on a give...
- SDL_JoystickGetHat (3)
- Get the current state of a joystick hat
- SDL_JoystickIndex (3)
- Get the index of an SDL_Joystick.
- SDL_JoystickNumAxes (3)
- Get the number of joystick axes
- SDL_JoystickNumBalls (3)
- Get the number of joystick trackballs
- SDL_JoystickNumButtons (3)
- Get the number of joysitck buttons
- SDL_JoystickNumHats (3)
- Get the number of joystick hats
- SDL_JoystickOpened (3)
- Determine if a joystick has been opened
- SDL_JoystickUpdate (3)
- Updates the state of all joysticks
- SDL_KillThread (3)
- Gracelessly terminates the thread.
- SDL_LockAudio (3)
- Lock out the callback function
- SDL_OpenAudio (3)
- Opens the audio device with the desired parameters.
- SDL_PauseAudio (3)
- Pauses and unpauses the audio callback processing
- SDL_PeepEvents (3)
- Checks the event queue for messages and optionally ret...
- SDL_PumpEvents (3)
- Pumps the event loop, gathering events from the input ...
- SDL_PushEvent (3)
- Pushes an event onto the event queue
- SDL_Quit (3)
- Shut down SDL
- SDL_QuitSubSystem (3)
- Shut down a subsystem
- SDL_RemoveTimer (3)
- Remove a timer which was added with SDL_AddTimer.
- SDL_SemPost (3)
- Unlock a semaphore.
- SDL_SemTryWait (3)
- Attempt to lock a semaphore but don't suspend the thread.
- SDL_SemValue (3)
- Return the current value of a semaphore.
- SDL_SemWait (3)
- Lock a semaphore and suspend the thread if the semapho...
- SDL_SemWaitTimeout (3)
- Lock a semaphore, but only wait up to a specified ma...
- SDL_SetAlpha (3)
- Adjust the alpha properties of a surface
- SDL_SetClipRect (3)
- Sets the clipping rectangle for a surface.
- SDL_SetColorKey (3)
- Sets the color key (transparent pixel) in a blittable ...
- SDL_SetColors (3)
- Sets a portion of the colormap for the given 8-bit sur...
- SDL_SetCursor (3)
- Set the currently active mouse cursor.
- SDL_SetEventFilter (3)
- Sets up a filter to process all events before they a...
- SDL_SetGamma (3)
- Sets the color gamma function for the display
- SDL_SetGammaRamp (3)
- Sets the color gamma lookup tables for the display
- SDL_SetModState (3)
- Set the current key modifier state
- SDL_SetPalette (3)
- Sets the colors in the palette of an 8-bit surface.
- SDL_SetTimer (3)
- Set a callback to run after the specified number of mi...
- SDL_SetVideoMode (3)
- Set up a video mode with the specified width, height a...
- SDL_ShowCursor (3)
- Toggle whether or not the cursor is shown on the screen.
- SDL_Surface (3)
- Graphical Surface Structure
- SDL_ThreadID (3)
- Get the 32-bit thread identifier for the current thread.
- SDL_UnlockAudio (3)
- Unlock the callback function
- SDL_UpdateRect (3)
- Makes sure the given area is updated on the given screen.
- SDL_UpdateRects (3)
- Makes sure the given list of rectangles is updated on ...
- SDL_VideoDriverName (3)
- Obtain the name of the video driver
- SDL_VideoModeOK (3)
- Check to see if a particular video mode is supported.
- SDL_WaitEvent (3)
- Waits indefinitely for the next available event.
- SDL_WaitThread (3)
- Wait for a thread to finish.
- SDL_WarpMouse (3)
- Set the position of the mouse cursor.
- SDL_WasInit (3)
- Check which subsystems are initialized
- SDL_WM_GetCaption (3)
- Gets the window title and icon name.
- SDL_WM_IconifyWindow (3)
- Iconify/Minimise the window
- SDL_WM_SetCaption (3)
- Sets the window tile and icon name.
- SDL_WM_SetIcon (3)
- Sets the icon for the display window.
- SDLmm (3)
- The namespace for the SDLmm library.
- sdlmm.h (3)
- (unknown subject)
- SDLmm_BaseSurface (3)
- An abstract base class for graphical surfaces.
- SDLmm_Display (3)
- The video frame buffer surface.
- SDLmm_Event (3)
- The general Event class.
- SDLmm_EventHandler (3)
- The base class used for custom Event handlers.
- SDLmm_SRect (3)
- This enhanced version of SDL_Rect includes a number of...
- SDLmm_Surface (3)
- A graphical surface structure which is used to store g...
- seahorse (1)
- Passwords and Keys
- seahorse-daemon (1)
- seahorse pass phrase caching agent
- seahorse-tool (1)
- PGP/GnuPG file encryption for the GNOME Desktop
- search.h (0p)
- search tables
- Search::Dict (3)
- look - search for key in dictionary file
- search_bbt (9)
- [GENERIC] scan the device for a specific bad block table
- search_read_bbts (9)
- [GENERIC] scan the device for bad block table(s)
- urxvt-searchable-scrollback-256color (1)
- incremental scrollback search (ena...
- seccomp_api_get (3)
- Manage the libseccomp API level
- seccomp_api_set (3)
- Manage the libseccomp API level
- seccomp_arch_add (3)
- Manage seccomp filter architectures
- seccomp_arch_exist (3)
- Manage seccomp filter architectures
- seccomp_arch_native (3)
- Manage seccomp filter architectures
- seccomp_arch_remove (3)
- Manage seccomp filter architectures
- seccomp_arch_resolve_name (3)
- Manage seccomp filter architectures
- seccomp_attr_get (3)
- Manage the seccomp filter attributes
- seccomp_attr_set (3)
- Manage the seccomp filter attributes
- seccomp_export_bpf (3)
- Export the seccomp filter
- seccomp_export_pfc (3)
- Export the seccomp filter
- seccomp_init (3)
- Initialize the seccomp filter state
- seccomp_load (3)
- Load the current seccomp filter into the kernel
- seccomp_release (3)
- Release the seccomp filter state
- seccomp_reset (3)
- Initialize the seccomp filter state
- seccomp_syscall_priority (3)
- Prioritize syscalls in the seccomp filter
- seccomp_syscall_resolve_name_arch (3)
- Resolve a syscall name
- seccomp_syscall_resolve_num_arch (3)
- Resolve a syscall name
- seccomp_version (3)
- Query the libseccomp version information
- secolor.conf (5)
- The SELinux color configuration file
- securetty (5)
- file which lists terminals from which root can log in
- securetty_types (5)
- The SELinux secure tty type configuration file
- security_check_context (3)
- check the validity of a SELinux context
- security_check_context_raw (3)
- check the validity of a SELinux context
- security_compute_av (3)
- query the SELinux policy database in the kernel
- security_compute_av_flags (3)
- query the SELinux policy database in the kernel
- security_compute_av_flags_raw (3)
- query the SELinux policy database in the ...
- security_compute_av_raw (3)
- query the SELinux policy database in the kernel
- security_compute_create (3)
- query the SELinux policy database in the kernel
- security_compute_create_name (3)
- query the SELinux policy database in the k...
- security_compute_create_name_raw (3)
- query the SELinux policy database in t...
- security_compute_create_raw (3)
- query the SELinux policy database in the ke...
- security_compute_member (3)
- query the SELinux policy database in the kernel
- security_compute_member_raw (3)
- query the SELinux policy database in the ke...
- security_compute_relabel (3)
- query the SELinux policy database in the kernel
- security_compute_relabel_raw (3)
- query the SELinux policy database in the k...
- security_compute_user (3)
- query the SELinux policy database in the kernel
- security_compute_user_raw (3)
- query the SELinux policy database in the kernel
- security_deny_unknown (3)
- get or set the enforcing state of SELinux
- security_disable (3)
- disable the SELinux kernel code at runtime
- security_fake_certverify (8)
- A fake cert validation helper for Squid
- security_get_initial_context (3)
- query the SELinux policy database in the k...
- security_get_initial_context_raw (3)
- query the SELinux policy database in t...
- security_getenforce (3)
- get or set the enforcing state of SELinux
- security_init (9)
- initializes the security framework
- SECURITY_LABEL (7pg161)
- define or change a security label applied to an object
- security_policyvers (3)
- get the version of the SELinux policy
- security_setenforce (3)
- get or set the enforcing state of SELinux
- securityfs_create_dir (9)
- create a directory in the securityfs filesystem
- securityfs_create_file (9)
- create a file in the securityfs filesystem
- securityfs_remove (9)
- removes a file or directory from the securityfs files...
- seek (n)
- Change the access position for an open channel
- seekdir (3)
- set the position of the next readdir() call in the dir...
- seekdir (3p)
- set the position of a directory stream
- select (2)
- synchronous I/O multiplexing
- select (3p)
- synchronous I/O multiplexing
- SELECT_INTO (7pg161)
- define a new table from the results of a query
- select_tut (2)
- synchronous I/O multiplexing
- selection (n)
- Manipulate the X selection
- urxvt-selection-to-clipboard-256color (1)
- copy the selection to the clipboa...
- SelectSaver (3)
- save and restore selected file handle
- self (n)
- method call internal introspection
- selinux_binary_policy_path (3)
- These functions return the paths to the acti...
- selinux_booleans_path (3)
- These functions return the paths to the active SE...
- selinux_check_access (3)
- query the SELinux policy database in the kernel
- selinux_check_passwd_access (3)
- query the SELinux policy database in the ke...
- selinux_check_securetty_context (3)
- check whether a SELinux tty security co...
- selinux_colors_path (3)
- Return a path to the active SELinux policy color co...
- selinux_contexts_path (3)
- These functions return the paths to the active SE...
- selinux_current_policy_path (3)
- These functions return the paths to the act...
- selinux_default_context_path (3)
- These functions return the paths to the ac...
- selinux_default_type_path (3)
- These functions return the paths to the activ...
- selinux_failsafe_context_path (3)
- These functions return the paths to the a...
- selinux_file_context_homedir_path (3)
- These functions return the paths to t...
- selinux_file_context_local_path (3)
- These functions return the paths to the...
- selinux_file_context_path (3)
- These functions return the paths to the activ...
- selinux_file_context_verify (3)
- Compare the SELinux security context on dis...
- selinux_getenforcemode (3)
- get the enforcing state of SELinux
- selinux_getpolicytype (3)
- get the type of SELinux policy running on the system
- selinux_homedir_context_path (3)
- These functions return the paths to the ac...
- selinux_lsetfilecon_default (3)
- set the file context to the system defaults
- selinux_media_context_path (3)
- These functions return the paths to the acti...
- selinux_netfilter_context_path (3)
- These functions return the paths to the ...
- selinux_path (3)
- These functions return the paths to the active SELinux...
- selinux_policy_root (3)
- return the path of the SELinux policy files for thi...
- selinux_removable_context_path (3)
- These functions return the paths to the ...
- selinux_securetty_types_path (3)
- These functions return the paths to the ac...
- selinux_set_mapping (3)
- establish dynamic object class and permission mapping
- selinux_set_policy_root (3)
- return the path of the SELinux policy files for...
- selinux_status_close (3)
- reference the SELinux kernel status without invoca...
- selinux_status_deny_unknown (3)
- reference the SELinux kernel status without...
- selinux_status_getenforce (3)
- reference the SELinux kernel status without i...
- selinux_status_open (3)
- reference the SELinux kernel status without invocat...
- selinux_status_policyload (3)
- reference the SELinux kernel status without i...
- selinux_status_updated (3)
- reference the SELinux kernel status without invo...
- selinux_user_contexts_path (3)
- These functions return the paths to the acti...
- selinux_usersconf_path (3)
- These functions return the paths to the active S...
- selinux_x_context_path (3)
- These functions return the paths to the active S...
- selinuxenabled (8)
- tool to be used within shell scripts to determine if s...
- selinuxexeccon (8)
- report SELinux context used for this executable
- sem_close (3)
- close a named semaphore
- sem_close (3p)
- close a named semaphore
- sem_destroy (3)
- destroy an unnamed semaphore
- sem_destroy (3p)
- destroy an unnamed semaphore
- sem_getvalue (3)
- get the value of a semaphore
- sem_getvalue (3p)
- get the value of a semaphore
- sem_init (3)
- initialize an unnamed semaphore
- sem_init (3p)
- initialize an unnamed semaphore
- sem_open (3)
- initialize and open a named semaphore
- sem_open (3p)
- initialize and open a named semaphore
- sem_overview (7)
- overview of POSIX semaphores
- sem_post (3)
- unlock a semaphore
- sem_post (3p)
- unlock a semaphore
- sem_timedwait (3)
- lock a semaphore
- sem_timedwait (3p)
- lock a semaphore
- sem_trywait (3)
- lock a semaphore
- sem_trywait (3p)
- lock a semaphore
- sem_unlink (3)
- remove a named semaphore
- sem_unlink (3p)
- remove a named semaphore
- sem_wait (3)
- lock a semaphore
- sem_wait (3p)
- lock a semaphore
- semanage.conf (5)
- global configuration file for the SELinux Management l...
- semanage_bool_set_active (3)
- update an existing SELinux boolean in the curr...
- semaphore.h (0p)
- semaphores
- semctl (2)
- System V semaphore control operations
- semctl (3p)
- XSI semaphore control operations
- semget (2)
- get a System V semaphore set identifier
- semget (3p)
- get set of XSI semaphores
- semodule_deps (8)
- show the dependencies between SELinux policy packages.
- semodule_link (8)
- Link SELinux policy module packages together
- semop (2)
- System V semaphore operations
- semop (3p)
- XSI semaphore operations
- semtimedop (2)
- System V semaphore operations
- sendinpaths (8)
- Send Usenet Path: statistics via e-mail
- sensors-detect (8)
- detect hardware monitoring chips
- sepermit.conf (5)
- configuration file for the pam_sepermit module
- sepol_check_context (3)
- Check the validity of a security context against a ...
- sepol_genbools (3)
- Rewrite a binary policy with different boolean settings
- sepol_genusers (3)
- Generate a new binary policy image with a customized u...
- seq_escape (9)
- print string into buffer, escaping some characters
- seq_hlist_next (9)
- move to the next position of the hlist
- seq_hlist_next_percpu (9)
- move to the next position of the percpu hlist array
- seq_hlist_next_rcu (9)
- move to the next position of the hlist protected by RCU
- seq_hlist_start (9)
- start an iteration of a hlist
- seq_hlist_start_head (9)
- start an iteration of a hlist
- seq_hlist_start_head_rcu (9)
- start an iteration of a hlist protected by RCU
- seq_hlist_start_percpu (9)
- start an iteration of a percpu hlist array
- seq_hlist_start_rcu (9)
- start an iteration of a hlist protected by RCU
- seq_lseek (9)
- ->llseek method for sequential files.
- seq_path (9)
- seq_file interface to print a pathname
- seq_read (9)
- ->read method for sequential files.
- seq_release (9)
- free the structures associated with sequential file.
- Sereal::Performance (3pm)
- Getting the most out of the Perl-Sereal implement...
- serialver (1)
- Returns the serial version UID for specified classes.
- serialver-java-1.7.0-openjdk (1)
- The Serial Version Command
- serialver-java-1.8.0-openjdk (1)
- Returns the serial version UID for specifi...
- servertool-java-1.7.0-openjdk (1)
- The Java(TM) IDL Server Tool
- service_seusers (5)
- The SELinux GNU/Linux user and service to SELinux user...
- sestatus.conf (5)
- The sestatus(8) configuration file.
- set_aumessage_mode (3)
- Sets the message mode
- SET_CONSTRAINTS (7pg161)
- set constraint check timing for the current transa...
- set_current_blocked (9)
- change current->blocked mask
- set_dma_reserve (9)
- set the specified number of pages reserved in the firs...
- set_escdelay (3ncurses)
- curses thread support
- set_field_init (3form)
- set hooks for automatic invocation by applications
- set_field_just (3form)
- retrieve field characteristics
- set_field_term (3form)
- set hooks for automatic invocation by applications
- set_field_userptr (3form)
- associate application data with a form field
- set_fieldtype_choice (3form)
- define validation-field types
- set_form_init (3form)
- set hooks for automatic invocation by applications
- set_form_term (3form)
- set hooks for automatic invocation by applications
- set_form_userptr (3form)
- associate application data with a form item
- SET_IEEE80211_DEV (9)
- set device for 802.11 hardware
- SET_IEEE80211_PERM_ADDR (9)
- set the permanent MAC address for 802.11 hardware
- set_item_init (3menu)
- set hooks for automatic invocation by applications
- set_item_term (3menu)
- set hooks for automatic invocation by applications
- set_item_userptr (3menu)
- associate application data with a menu item
- set_matchpathcon_flags (3)
- set flags controlling the operation of matchpath...
- set_matchpathcon_invalidcon (3)
- set flags controlling the operation of matc...
- set_matchpathcon_printf (3)
- set flags controlling the operation of matchpat...
- set_menu_init (3menu)
- set hooks for automatic invocation by applications
- set_menu_mark (3menu)
- get and set the menu mark string
- set_menu_term (3menu)
- set hooks for automatic invocation by applications
- set_menu_userptr (3menu)
- associate application data with a menu item
- set_pfnblock_flags_mask (9)
- Set the requested group of flags for a pagebloc...
- SET_ROLE (7pg161)
- set the current user identifier of the current session
- set_selinuxmnt (3)
- initialize the global variable selinux_mnt
- SET_SESSION_AUTHORIZATION (7pg161)
- set the session user identifier and the ...
- set_tabsize (3ncurses)
- curses thread support
- set_thread_area (2)
- set a thread local storage (TLS) area
- set_tid_address (2)
- set pointer to thread ID
- set_timer_slack (9)
- set the allowed slack for a timer
- SET_TRANSACTION (7pg161)
- set the characteristics of the current transaction
- set_wiphy_dev (9)
- set device pointer for wiphy
- setarch (8)
- change reported architecture in new program environmen...
- setcchar (3ncurses)
- Get a wide character string and rendition from a cchar...
- setcifsacl (1)
- Userspace helper to alter an ACL in a security descrip...
- setconsole (8)
- determines the real tty of stdin
- setcontext (2)
- get or set the user context
- setcontext (3)
- get or set the user context
- setegid (3p)
- set the effective group ID
- setenforce (8)
- modify the mode SELinux is running in
- setenv (3)
- change or add an environment variable
- setenv (3p)
- add or change environment variable
- setexeccon (3)
- get or set the SELinux security context used for execu...
- setexeccon_raw (3)
- get or set the SELinux security context used for execu...
- setfscreatecon (3)
- get or set the SELinux security context used for creat...
- setfscreatecon_raw (3)
- get or set the SELinux security context used for cre...
- setfsent (3)
- handle fstab entries
- setfsgid (2)
- set group identity used for filesystem checks
- setfsgid32 (2)
- set group identity used for filesystem checks
- setfsuid (2)
- set user identity used for filesystem checks
- setfsuid32 (2)
- set user identity used for filesystem checks
- setgrent (3p)
- reset the group database to the first entry
- sethostent (3)
- get network host entry
- sethostent (3p)
- network host database functions
- sethostid (2)
- get or set the unique identifier of the current host
- sethostid (3)
- get or set the unique identifier of the current host
- sethostname (2)
- get/set hostname
- setitimer (3p)
- set the value of an interval timer
- setjmp.h (0p)
- stack environment declarations
- setkeycreatecon (3)
- get or set the SELinux security context used for creat...
- setkeycreatecon_raw (3)
- get or set the SELinux security context used for cr...
- setleds (1)
- set the keyboard leds
- setlocale (3)
- set the current locale
- setlogmask (3p)
- set the log priority mask
- setmetamode (1)
- define the keyboard meta key handling
- setnetgrent (3)
- handle network group entries
- setns (2)
- reassociate thread with a namespace
- setpgrp (3p)
- set the process group ID
- setpriority (2)
- get/set program scheduling priority
- setpriority (3p)
- set the nice value
- setpriv (1)
- run a program with different Linux privilege settings
- setprogname (3bsd)
- get or set the program name
- setreg (1)
- Change settings for public key cryptography
- setsid (2)
- creates a session and sets the process group ID
- setsockcreatecon (3)
- get or set the SELinux security context used for creat...
- setsockcreatecon_raw (3)
- get or set the SELinux security context used for c...
- setsockopt (3p)
- set the socket options
- setspent (3)
- get shadow password file entry
- setstate (3p)
- switch pseudo-random number generator state arrays
- setup_per_zone_wmarks (9)
- called when min_free_kbytes changes or when memor...
- setusershell (3)
- get permitted user shells
- setutxent (3p)
- reset the user accounting database to the first entry
- setvtrgb (8)
- set the virtual terminal RGB colors
- setxkbmap (1)
- set the keyboard using the X Keyboard Extension
- seusers (5)
- The SELinux GNU/Linux user to SELinux user mapping con...
- tc-sfb (8)
- Stochastic Fair Blue
- sfdp (1)
- filter for drawing large undirected graphs
- tc-sfq (8)
- Stochastic Fairness Queueing
- sftp (1)
- OpenSSH secure file transfer
- sftp-server (8)
- OpenSSH SFTP server subsystem
- sfv-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- sg_compare_and_write (8)
- send the SCSI COMPARE AND WRITE command
- sg_emc_trespass (8)
- change ownership of SCSI LUN from another Service-Proc...
- sg_format (8)
- format or resize a SCSI disk (perhaps change its block...
- sg_logs (8)
- access log pages with SCSI LOG SENSE command
- sg_map (8)
- displays mapping between Linux sg and other SCSI devices
- sg_modes (8)
- reads mode pages with SCSI MODE SENSE command
- sg_read (8)
- read multiple blocks of data, optionally with SCSI REA...
- sg_reset (8)
- sends SCSI device, target, bus or host reset; or check...
- sg_sanitize (8)
- remove all user data from disk with SCSI SANITIZE command
- sg_sat_phy_event (8)
- use ATA READ LOG EXT via a SAT pass-through to fetch S...
- sg_sync (8)
- send SCSI SYNCHRONIZE CACHE command
- sg_test_rwbuf (8)
- test a SCSI host adapter by issuing dummy writes and r...
- sg_vpd (8)
- fetch Vital Product Data (VPD) pages via a SCSI INQUIR...
- sgetspent (3)
- get shadow password file entry
- sgetspent_r (3)
- get shadow password file entry
- sh (1p)
- shell, the standard command language interpreter
- sh64_get_wired_dtlb_entry (9)
- Allocate a wired (locked-in) entry in the DTLB
- sh64_next_free_dtlb_entry (9)
- Find the next available DTLB entry
- sh64_put_wired_dtlb_entry (9)
- Free a wired (locked-in) entry in the DTLB.
- sh64_setup_tlb_slot (9)
- Load up a translation in a wired slot.
- sh64_teardown_tlb_slot (9)
- Teardown a translation.
- sh64_tlb_init (9)
- Perform initial setup for the DTLB and ITLB.
- sha1 (n)
- SHA1 Message-Digest Algorithm
- SHA1_Final (3osslssl-3)
- Secure Hash Algorithm
- SHA1_Init (3osslssl-3)
- Secure Hash Algorithm
- SHA1_Update (3osslssl-3)
- Secure Hash Algorithm
- sha1hmac (8)
- compute and check HMAC values
- sha1sum (1)
- compute and check SHA1 message digest
- SHA224 (3osslssl-3)
- Secure Hash Algorithm
- SHA224_Final (3osslssl-3)
- Secure Hash Algorithm
- SHA224_Init (3osslssl-3)
- Secure Hash Algorithm
- SHA224_Update (3osslssl-3)
- Secure Hash Algorithm
- sha224sum (1)
- compute and check SHA224 message digest
- sha256 (n)
- SHA256 Message-Digest Algorithm
- SHA256_Final (3osslssl-3)
- Secure Hash Algorithm
- SHA256_Init (3osslssl-3)
- Secure Hash Algorithm
- SHA256_Update (3osslssl-3)
- Secure Hash Algorithm
- sha256hmac (8)
- compute and check HMAC values
- sha256sum (1)
- compute and check SHA256 message digest
- SHA384 (3osslssl-3)
- Secure Hash Algorithm
- SHA384_Final (3osslssl-3)
- Secure Hash Algorithm
- SHA384_Init (3osslssl-3)
- Secure Hash Algorithm
- SHA384_Update (3osslssl-3)
- Secure Hash Algorithm
- sha384hmac (8)
- compute and check HMAC values
- sha384sum (1)
- compute and check SHA384 message digest
- SHA512 (3osslssl-3)
- Secure Hash Algorithm
- SHA512_Final (3osslssl-3)
- Secure Hash Algorithm
- SHA512_Init (3osslssl-3)
- Secure Hash Algorithm
- SHA512_Update (3osslssl-3)
- Secure Hash Algorithm
- sha512hmac (8)
- compute and check HMAC values
- sha512sum (1)
- compute and check SHA512 message digest
- shadebobs (6x)
- oscillating vapor trails.
- shadow (3)
- encrypted password file routines
- shar (1)
- create shell archives
- sharesec (1)
- Set or get share ACLs
- shasum (1)
- Print or Check SHA Checksums
- shcomp (1ast)
- compile a shell script
- shellinaboxd (1)
- publish command line shell through AJAX interface
- shells (5)
- pathnames of valid login shells
- shift (1p)
- shift positional parameters
- shlock (1)
- Create lock files for use in shell scripts
- shm_open (3)
- create/open or unlink POSIX shared memory objects
- shm_open (3p)
- open a shared memory object (REALTIME)
- shm_overview (7)
- overview of POSIX shared memory
- shm_unlink (3)
- create/open or unlink POSIX shared memory objects
- shm_unlink (3p)
- remove a shared memory object (REALTIME)
- shmat (2)
- System V shared memory operations
- shmat (3p)
- XSI shared memory attach operation
- shmctl (2)
- System V shared memory control
- shmctl (3p)
- XSI shared memory control operations
- shmdt (2)
- System V shared memory operations
- shmdt (3p)
- XSI shared memory detach operation
- shmget (2)
- allocates a System V shared memory segment
- shmget (3p)
- get an XSI shared memory segment
- shmop (2)
- System V shared memory operations
- shost_for_each_device (9)
- iterate over all devices of a host
- SHOW (7pg161)
- show the value of a run-time parameter
- show_panel (3curses)
- panel stack extension for curses
- showaudio (1)
- Play an audio email message
- showconsolefont (8)
- Show the current EGA/VGA console screen font
- showexternal (1)
- Fetch and display the body of a mail message that is i...
- showfigfonts (6)
- prints a list of available figlet fonts
- showfont (1)
- font dumper for X font server
- showkey (1)
- examine the codes sent by the keyboard
- showmount (8)
- show mount information for an NFS server
- shownonascii (1)
- View all or part of a mail message in a non-ASCII font
- showpartial (1)
- Fetch and display the body of a mail message that is i...
- showpicture (1)
- View an image received in the mail
- showq (8)
- list the Postfix mail queue
- showrgb (1)
- display an rgb color-name database
- shred (1)
- overwrite a file to hide its contents, and optionally ...
- shrink_dcache_parent (9)
- prune dcache
- shrink_dcache_sb (9)
- shrink dcache for a superblock
- shrinkfile (1)
- shrink a file on a line boundary
- shuf (1)
- generate random permutations
- shutdown (2)
- shut down part of a full-duplex connection
- shutdown (3p)
- shut down socket send and receive operations
- shutdown (8)
- Halt, power-off or reboot the machine
- shutdown_mib (3)
- netsnmp_mib_api functions
- sieveshell (1)
- Cyrus IMAP documentation
- sigaction (2)
- examine and change a signal action
- sigaction (3p)
- examine and change a signal action
- sigevent (7)
- structure for notification from asynchronous routines
- sighold (3)
- System V signal API
- sighold (3p)
- signal management
- siglongjmp (3p)
- non-local goto with signal handling
- signal (2)
- ANSI C signal handling
- signal.h (0p)
- signals
- sigpause (3p)
- remove a signal from the signal mask and suspend the t...
- sigprocmask (2)
- examine and change blocked signals
- sigprocmask (3p)
- examine and change blocked signals
- sigreturn (2)
- return from signal handler and cleanup stack frame
- sigtimedwait (2)
- synchronously wait for queued signals
- sigtrap (3)
- Perl pragma to enable simple signal handling
- sigwaitinfo (2)
- synchronously wait for queued signals
- sil_dev_config (9)
- Apply device/host-specific errata fixups
- sinh (3)
- hyperbolic sine function
- sinh (3p)
- hyperbolic sine functions
- sinhf (3)
- hyperbolic sine function
- sinhl (3)
- hyperbolic sine function
- sk98lin (4)
- Marvell/SysKonnect Gigabit Ethernet driver v6.21
- sk_alloc (9)
- All socket objects are allocated here
- sk_attach_filter (9)
- attach a socket filter
- sk_chk_filter (9)
- verify socket filter code
- sk_filter (9)
- run a packet through a socket filter
- sk_has_allocations (9)
- check if allocations are outstanding
- sk_stream_wait_connect (9)
- Wait for a socket to get into the connected state
- sk_TYPE_push (3osslssl-3)
- stack container
- sk_TYPE_shift (3osslssl-3)
- stack container
- sk_TYPE_unshift (3osslssl-3)
- stack container
- sk_unattached_filter_create (9)
- create an unattached filter
- skb_append_datato_frags (9)
- append the user data to a skb
- skb_checksum_complete (9)
- Calculate checksum of an entire packet
- skb_checksum_none_assert (9)
- make sure skb ip_summed is CHECKSUM_NONE
- skb_checksum_setup (9)
- set up partial checksum offset
- skb_clone_writable (9)
- is the header of a clone writable
- skb_cloned (9)
- is the buffer a clone
- skb_complete_tx_timestamp (9)
- deliver cloned skb with tx timestamps
- skb_copy_and_csum_datagram_iovec (9)
- Copy and checkum skb to user iovec.
- skb_cow (9)
- copy header of skb when it is required
- skb_cow_data (9)
- Check that a socket buffer's data buffers are writable
- skb_cow_head (9)
- skb_cow but only making the head writable
- skb_dequeue (9)
- remove from the head of the queue
- skb_dequeue_tail (9)
- remove from the tail of the queue
- skb_dst_set_noref (9)
- sets skb dst, hopefully, without taking reference
- skb_dst_set_noref_force (9)
- sets skb dst, without taking reference
- skb_frag_address (9)
- gets the address of the data contained in a paged frag...
- skb_frag_address_safe (9)
- gets the address of the data contained in a paged...
- skb_frag_dma_map (9)
- maps a paged fragment via the DMA API
- skb_frag_page (9)
- retrieve the page referred to by a paged fragment
- skb_frag_set_page (9)
- sets the page contained in a paged fragment of an skb
- skb_gso_network_seglen (9)
- Return length of individual segments of a gso pa...
- skb_gso_transport_seglen (9)
- Return length of individual segments of a gso ...
- skb_has_shared_frag (9)
- can any frag be overwritten
- skb_head_is_locked (9)
- Determine if the skb->head is locked down
- skb_header_cloned (9)
- is the header a clone
- skb_header_release (9)
- release reference to header
- skb_headroom (9)
- bytes at buffer head
- skb_mac_gso_segment (9)
- mac layer segmentation handler.
- skb_morph (9)
- morph one skb into another
- skb_mstamp_us_delta (9)
- compute the difference in usec between two skb_mstamp
- skb_needs_linearize (9)
- check if we need to linearize a given skb depending...
- skb_orphan (9)
- orphan a buffer
- skb_orphan_frags (9)
- orphan the frags contained in a buffer
- skb_pad (9)
- zero pad the tail of an skb
- skb_page_frag_refill (9)
- check that a page_frag contains enough room
- skb_peek (9)
- peek at the head of an sk_buff_head
- skb_peek_next (9)
- peek skb following the given one from a queue
- skb_peek_tail (9)
- peek at the tail of an sk_buff_head
- skb_postpull_rcsum (9)
- update checksum for received skb after pull
- skb_pull (9)
- remove data from the start of a buffer
- skb_pull_rcsum (9)
- pull skb and update receive checksum
- skb_push (9)
- add data to the start of a buffer
- skb_queue_empty (9)
- check if a queue is empty
- skb_queue_head (9)
- queue a buffer at the list head
- skb_queue_is_first (9)
- check if skb is the first entry in the queue
- skb_queue_is_last (9)
- check if skb is the last entry in the queue
- skb_queue_len (9)
- get queue length
- skb_queue_next (9)
- return the next packet in the queue
- skb_queue_prev (9)
- return the prev packet in the queue
- skb_queue_splice (9)
- join two skb lists, this is designed for stacks
- skb_queue_splice_init (9)
- join two skb lists and reinitialise the emptied list
- skb_queue_splice_tail (9)
- join two skb lists, each list being a queue
- skb_queue_splice_tail_init (9)
- join two skb lists and reinitialise the empt...
- skb_queue_tail (9)
- queue a buffer at the list tail
- skb_reserve (9)
- adjust headroom
- skb_share_check (9)
- check if buffer is shared and if so clone it
- skb_shared (9)
- is the buffer shared
- skb_split (9)
- Split fragmented skb to two parts at length len.
- skb_tx_timestamp (9)
- Driver hook for transmit timestamping
- skb_unshare (9)
- make a copy of a shared buffer
- skip_spaces (9)
- Removes leading whitespace from str.
- skytentacles (6x)
- 3D tentacles from the sky!
- slabtop (1)
- display kernel slab cache information in real time
- slapacl (8)
- Check access to a list of attributes.
- slapauth (8)
- Check a list of string-represented IDs for LDAP authc/...
- slapd-hdb (5)
- Berkeley DB backends to slapd
- slapd.access (5)
- access configuration for slapd, the stand-alone LDAP d...
- slapd.backends (5)
- backends for slapd, the stand-alone LDAP daemon
- slapd.conf (5)
- configuration file for slapd, the stand-alone LDAP daemon
- slapd.overlays (5)
- overlays for slapd, the stand-alone LDAP daemon
- slapd.plugin (5)
- plugin configuration for slapd, the stand-alone LDAP d...
- slapdn (8)
- Check a list of string-represented LDAP DNs based on s...
- slapo-chain (5)
- chain overlay to slapd
- slapo-memberof (5)
- Reverse Group Membership overlay to slapd
- slapo-pcache (5)
- proxy cache overlay to slapd
- slapschema (8)
- SLAPD in-database schema checking utility
- slaptest (8)
- Check the suitability of the OpenLDAP slapd configuration
- slattach (8)
- attach a network interface to a serial line
- sleep (3)
- sleep for the specified number of seconds
- sleeping_thread_to_gdb_regs (9)
- Convert ptrace regs to GDB regs
- sliceprint (1)
- slice documents with long lines.
- slidescreen (6x)
- permute the screen image like an 8-puzzle
- SLIST_FOREACH (3bsd)
- implementations of singly-linked lists, singly-linked ...
- SLIST_FOREACH_FROM (3bsd)
- implementations of singly-linked lists, singly-li...
- SLIST_FOREACH_FROM_SAFE (3bsd)
- implementations of singly-linked lists, sing...
- SLIST_FOREACH_SAFE (3bsd)
- implementations of singly-linked lists, singly-li...
- SLIST_HEAD (3bsd)
- implementations of singly-linked lists, singly-linked ...
- SLIST_HEAD_INITIALIZER (3bsd)
- implementations of singly-linked lists, singl...
- SLIST_INSERT_HEAD (3bsd)
- implementations of singly-linked lists, singly-lin...
- SLIST_REMOVE_HEAD (3bsd)
- implementations of singly-linked lists, singly-lin...
- slk_noutrefresh (3ncurses)
- curses soft label routines
- slk_noutrefresh_sp (3ncurses)
- curses screen-pointer extension
- slk_refresh (3ncurses)
- curses soft label routines
- slk_refresh_sp (3ncurses)
- curses screen-pointer extension
- slk_touch (3ncurses)
- curses soft label routines
- slk_touch_sp (3ncurses)
- curses screen-pointer extension
- sm (1)
- Command-line interface to the INN storage manager
- SM2 (7osslssl-3)
- EVP_PKEY keytype support for the Chinese SM2 signature...
- smb.conf (5)
- The configuration file for the Samba suite
- smbcquotas (1)
- Set or get QUOTAs of NTFS 5 shares
- smbpasswd (5)
- The Samba encrypted password file
- smbpasswd (8)
- change a user's SMB password
- smbspool_krb5_wrapper (8)
- This is a CUPS printing backend which calls smbspool
- smbtar (1)
- shell script for backing up SMB/CIFS shares directly t...
- smicache (1)
- caching method for use with libsmi
- smidiff (1)
- check differences between a pair of SMI or SPPI modules
- smilint (1)
- syntax and semantic checks of SMIv1/v2 and SPPI modules
- xmode2 (1)
- shows the pulse/space length of infrared signals
- smp_conf_phy_event (8)
- invoke CONFIGURE PHY EVENT function
- smp_conf_zone_phy_info (8)
- invoke CONFIGURE ZONE PHY INFORMATION function
- smp_phy_control (8)
- invoke PHY CONTROL SMP function
- smp_phy_test (8)
- invoke PHY TEST FUNTION SMP function
- smp_read_gpio (8)
- invoke READ GPIO REGISTER (ENHANCED) SMP function
- smp_rep_phy_err_log (8)
- invoke REPORT PHY ERROR LOG SMP function
- smp_rep_phy_event (8)
- invoke REPORT PHY EVENT SMP function
- smp_rep_phy_event_list (8)
- invoke REPORT PHY EVENT LIST SMP function
- smp_rep_phy_sata (8)
- invoke REPORT PHY SATA SMP function
- smp_write_gpio (8)
- invoke WRITE GPIO REGISTER (ENHANCED) SMP function
- smtp (n)
- Client-side tcl implementation of the smtp protocol
- snake (6)
- display chase game
- snd_ac97_get_short_name (9)
- retrieve codec name
- snd_ac97_pcm_close (9)
- closes the given AC97 pcm
- snd_ac97_pcm_open (9)
- opens the given AC97 pcm
- snd_ac97_read (9)
- read a value from the given register
- snd_ac97_set_rate (9)
- change the rate of the given input/output.
- snd_ac97_tune_hardware (9)
- tune up the hardware
- snd_ac97_update (9)
- update the value on the given register
- snd_ac97_update_bits (9)
- update the bits on the given register
- snd_ac97_update_power (9)
- update the powerdown register
- snd_ac97_write (9)
- write a value on the given register
- snd_ac97_write_cache (9)
- write a value on the given register and update the...
- snd_BUG_ON (9)
- debugging check macro
- snd_card_disconnect (9)
- disconnect all APIs from the file-operations (user ...
- snd_card_file_add (9)
- add the file to the file list of the card
- snd_card_file_remove (9)
- remove the file from the file list
- snd_card_proc_new (9)
- create an info entry for the given card
- snd_card_register (9)
- register the soundcard
- snd_ctl_activate_id (9)
- activate/inactivate the control of the given id
- snd_ctl_add (9)
- add the control instance to the card
- snd_ctl_add_slave_uncached (9)
- Add a virtual slave control
- snd_ctl_add_vmaster_hook (9)
- Add a hook to a vmaster control
- snd_ctl_enum_info (9)
- fills the info structure for an enumerated control
- snd_ctl_find_id (9)
- find the control instance with the given id
- snd_ctl_find_numid (9)
- find the control instance with the given number-id
- snd_ctl_free_one (9)
- release the control instance
- snd_ctl_new1 (9)
- create a control instance from the template
- snd_ctl_remove (9)
- remove the control from the card and release it
- snd_ctl_remove_id (9)
- remove the control of the given id and release it
- snd_ctl_rename_id (9)
- replace the id of a control on the card
- snd_ctl_replace (9)
- replace the control instance of the card
- snd_ctl_sync_vmaster (9)
- Sync the vmaster slaves and hook
- snd_device_free (9)
- release the device from the card
- snd_device_register (9)
- register the device
- snd_dma_alloc_pages (9)
- allocate the buffer area according to the given type
- snd_dma_alloc_pages_fallback (9)
- allocate the buffer area according to the ...
- snd_dma_disable (9)
- stop the ISA DMA transfer
- snd_dma_free_pages (9)
- release the allocated buffer
- snd_dma_pointer (9)
- return the current pointer to DMA transfer buffer in b...
- snd_free_pages (9)
- release the pages
- snd_hwdep_new (9)
- create a new hwdep instance
- snd_info_create_card_entry (9)
- create an info entry for the given card
- snd_info_create_module_entry (9)
- create an info entry for the given module
- snd_info_free_entry (9)
- release the info entry
- snd_info_get_line (9)
- read one line from the procfs buffer
- snd_info_register (9)
- register the info entry
- snd_interval_list (9)
- refine the interval value from the list
- snd_interval_ratnum (9)
- refine the interval value
- snd_interval_refine (9)
- refine the interval value of configurator
- snd_iprintf (9)
- printf on the procfs buffer
- snd_jack_report (9)
- Report the current status of a jack
- snd_jack_set_parent (9)
- Set the parent device for a jack
- snd_malloc_pages (9)
- allocate pages with the given size
- snd_mpu401_uart_interrupt (9)
- generic MPU401-UART interrupt handler
- snd_mpu401_uart_interrupt_tx (9)
- generic MPU401-UART transmit irq handler
- snd_pcm_add_chmap_ctls (9)
- create channel-mapping control elements
- snd_pcm_capture_empty (9)
- check whether the capture buffer is empty
- snd_pcm_capture_ready (9)
- check whether the capture buffer is available
- snd_pcm_format_big_endian (9)
- Check the PCM format is big-endian
- snd_pcm_format_cpu_endian (9)
- Check the PCM format is CPU-endian
- snd_pcm_format_linear (9)
- Check the PCM format is linear
- snd_pcm_format_little_endian (9)
- Check the PCM format is little-endian
- snd_pcm_format_physical_width (9)
- return the physical bit-width of the format
- snd_pcm_format_set_silence (9)
- set the silence data on the buffer
- snd_pcm_format_signed (9)
- Check the PCM format is signed linear
- snd_pcm_format_silence_64 (9)
- return the silent data in 8 bytes array
- snd_pcm_format_size (9)
- return the byte size of samples on the given format
- snd_pcm_format_unsigned (9)
- Check the PCM format is unsigned linear
- snd_pcm_format_width (9)
- return the bit-width of the format
- snd_pcm_hw_constraint_integer (9)
- apply an integer constraint to an interval
- snd_pcm_hw_constraint_list (9)
- apply a list of constraints to a parameter
- snd_pcm_hw_constraint_mask64 (9)
- apply the given bitmap mask constraint
- snd_pcm_hw_constraint_minmax (9)
- apply a min/max range constraint to an int...
- snd_pcm_hw_constraint_msbits (9)
- add a hw constraint msbits rule
- snd_pcm_hw_constraint_pow2 (9)
- add a hw constraint power-of-2 rule
- snd_pcm_hw_constraint_ratdens (9)
- apply ratdens constraint to a parameter
- snd_pcm_hw_constraint_ratnums (9)
- apply ratnums constraint to a parameter
- snd_pcm_hw_constraint_step (9)
- add a hw constraint step rule
- snd_pcm_hw_param_first (9)
- refine config space and return minimum value
- snd_pcm_hw_param_last (9)
- refine config space and return maximum value
- snd_pcm_hw_param_value (9)
- return params field var value
- snd_pcm_hw_rule_add (9)
- add the hw-constraint rule
- snd_pcm_hw_rule_noresample (9)
- add a rule to allow disabling hw resampling
- snd_pcm_lib_free_pages (9)
- release the allocated DMA buffer.
- snd_pcm_lib_malloc_pages (9)
- allocate the DMA buffer
- snd_pcm_lib_preallocate_pages (9)
- pre-allocation for the given DMA type
- snd_pcm_limit_hw_rates (9)
- determine rate_min/rate_max fields
- snd_pcm_period_elapsed (9)
- update the pcm status for the next period
- snd_pcm_playback_data (9)
- check whether any data exists on the playback buffer
- snd_pcm_playback_empty (9)
- check whether the playback buffer is empty
- snd_pcm_playback_ready (9)
- check whether the playback buffer is available
- snd_pcm_rate_mask_intersect (9)
- computes the intersection between two rate ...
- snd_pcm_set_ops (9)
- set the PCM operators
- snd_pcm_set_sync (9)
- set the PCM sync id
- snd_pcm_sgbuf_ops_page (9)
- get the page struct at the given offset
- snd_pcm_stop (9)
- try to stop all running streams in the substream group
- snd_pcm_stream_str (9)
- Get a string naming the direction of a stream
- snd_pcm_suspend_all (9)
- trigger SUSPEND to all substreams in the given pcm
- snd_power_wait (9)
- wait until the power-state is changed.
- snd_rawmidi_receive (9)
- receive the input data from the device
- snd_rawmidi_set_ops (9)
- set the rawmidi operators
- snd_rawmidi_transmit (9)
- copy from the buffer to the device
- snd_rawmidi_transmit_ack (9)
- acknowledge the transmission
- snd_rawmidi_transmit_empty (9)
- check whether the output buffer is empty
- snd_rawmidi_transmit_peek (9)
- copy data from the internal buffer
- snd_register_device (9)
- Register the ALSA device file for the card
- snd_register_device_for_dev (9)
- Register the ALSA device file for the card
- snd_request_card (9)
- try to load the card module
- snd_unregister_device (9)
- unregister the device on the given card
- snmp.conf (5)
- configuration files for the Net-SNMP applications
- snmp_alarm_register_hr (3)
- alarm functions
- snmp_config (5)
- handling of Net-SNMP configuration files
- snmp_sess_synch_response (3)
- session functions
- snmp_synch_response (3)
- netsnmp_session_api functions
- snmpbulkget (1)
- communicates with a network entity using SNMP GETBULK ...
- snmpcmd (1)
- options and behaviour common to most of the Net-SNMP c...
- snmpd.conf (5)
- configuration file for the Net-SNMP SNMP agent
- snmpd.examples (5)
- example configuration for the Net-SNMP agent
- snmpd.internal (5)
- internal configuration of the Net-SNMP agent
- snmpget (1)
- communicates with a network entity using SNMP GET requ...
- snmpgetnext (1)
- communicates with a network entity using SNMP GETNEXT ...
- snmpkey (1)
- Create SNMPv3 security keys for the Net::SNMP module
- snmpset (1)
- communicates with a network entity using SNMP SET requ...
- snmptest (1)
- communicates with a network entity using SNMP requests
- snmptrapd.conf (5)
- configuration file for the Net-SNMP notification receiver
- snscore (6)
- display chase game
- sock_poll_wait (9)
- place memory barrier behind the poll_wait call.
- sock_register (9)
- add a socket protocol handler
- sock_unregister (9)
- remove a protocol handler
- sockatmark (3)
- determine whether socket is at out-of-band mark
- sockatmark (3p)
- determine whether a socket is at the out-of-band mark
- sort (1p)
- sort, merge, or sequence check text files
- sort (3)
- perl pragma to control sort() behaviour
- sox (1)
- Sound eXchange, the Swiss Army knife of audio manipula...
- soxformat (7)
- Sound eXchange, the Swiss Army knife of audio manipula...
- spans_boundary (9)
- Check a packet can be ISA DMA'd
- sparse_memory_present_with_active_reg... (9)
- Call memory_present for each a...
- spawn.h (0p)
- spawn (ADVANCED REALTIME)
- spectrogramscreenshots (3)
- .TH "spectrogramscreenshots" 3 "Mon Aug 1 2011" ...
- speedmine (6x)
- simulates speeding down a rocky mineshaft, or a funky ...
- speedtest-cli (1)
- Command line interface for testing internet bandwidth ...
- spfquery (1) - (Mail::SPF)
- Checks if a given set of e-mail paramete...
- spheremonics (6x)
- 3d spherical harmonic shapes.
- spi_add_device (9)
- Add spi_device allocated with spi_alloc_device
- spi_async (9)
- asynchronous SPI transfer
- spi_async_locked (9)
- version of spi_async with exclusive bus usage
- spi_bus_unlock (9)
- release the lock for exclusive SPI bus usage
- spi_busnum_to_master (9)
- look up master associated with bus_num
- SPI_commit (3pg161)
- commit the current transaction
- SPI_connect (3pg161)
- connect a C function to the SPI manager
- SPI_copytuple (3pg161)
- make a copy of a row in the upper executor context
- SPI_cursor_fetch (3pg161)
- fetch some rows from a cursor
- SPI_cursor_open (3pg161)
- set up a cursor using a statement created with SPI...
- SPI_cursor_open_with_args (3pg161)
- set up a cursor using a query and parame...
- SPI_cursor_open_with_paramlist (3pg161)
- set up a cursor using parameters
- spi_display_xfer_agreement (9)
- Print the current target transfer agreement
- SPI_execute_extended (3pg161)
- execute a command with out-of-line parameters
- SPI_execute_plan_with_paramlist (3pg161)
- execute a statement prepared by SP...
- SPI_execute_with_args (3pg161)
- execute a command with out-of-line parameters
- spi_finalize_current_message (9)
- the current message is complete
- SPI_finish (3pg161)
- disconnect a C function from the SPI manager
- SPI_fname (3pg161)
- determine the column name for the specified column number
- SPI_fnumber (3pg161)
- determine the column number for the specified column name
- SPI_freetuple (3pg161)
- free a row allocated in the upper executor context
- spi_get_next_queued_message (9)
- called by driver to check for queued messages
- SPI_getargcount (3pg161)
- return the number of arguments needed by a stateme...
- SPI_getargtypeid (3pg161)
- return the data type OID for an argument of a sta...
- SPI_getbinval (3pg161)
- return the binary value of the specified column
- SPI_getnspname (3pg161)
- return the namespace of the specified relation
- SPI_getrelname (3pg161)
- return the name of the specified relation
- SPI_gettype (3pg161)
- return the data type name of the specified column
- SPI_gettypeid (3pg161)
- return the data type OID of the specified column
- SPI_getvalue (3pg161)
- return the string value of the specified column
- spi_message_init_with_transfers (9)
- Initialize spi_message and append trans...
- SPI_palloc (3pg161)
- allocate memory in the upper executor context
- SPI_pfree (3pg161)
- free memory in the upper executor context
- SPI_prepare (3pg161)
- prepare a statement, without executing it yet
- SPI_prepare_cursor (3pg161)
- prepare a statement, without executing it yet
- SPI_prepare_extended (3pg161)
- prepare a statement, without executing it yet
- SPI_prepare_params (3pg161)
- prepare a statement, without executing it yet
- spi_read (9)
- SPI synchronous read
- SPI_register_relation (3pg161)
- make an ephemeral named relation available b...
- SPI_register_trigger_data (3pg161)
- make ephemeral trigger data available in...
- SPI_repalloc (3pg161)
- reallocate memory in the upper executor context
- SPI_rollback (3pg161)
- abort the current transaction
- spi_schedule_dv_device (9)
- schedule domain validation to occur on the device
- SPI_scroll_cursor_fetch (3pg161)
- fetch some rows from a cursor
- spi_sync (9)
- blocking/synchronous SPI data transfers
- spi_sync_locked (9)
- version of spi_sync with exclusive bus usage
- spi_sync_transfer (9)
- synchronous SPI data transfer
- SPI_unregister_relation (3pg161)
- remove an ephemeral named relation from th...
- spi_w8r16 (9)
- SPI synchronous 8 bit write followed by 16 bit read
- spi_w8r16be (9)
- SPI synchronous 8 bit write followed by 16 bit big-end...
- spi_w8r8 (9)
- SPI synchronous 8 bit write followed by 8 bit read
- spi_write (9)
- SPI synchronous write
- spi_write_then_read (9)
- SPI synchronous write followed by read
- splashy-theme.xml (5)
- a user-mode, POSIX and LSB compliant, boot splashing ...
- splashy_config (1)
- a user-mode, POSIX and LSB compliant, boot splashing s...
- splashy_update (1)
- a user-mode, POSIX and LSB compliant, boot splashing s...
- SPLAY_FOREACH (3bsd)
- implementations of splay and red-black trees
- SPLAY_HEAD (3bsd)
- implementations of splay and red-black trees
- SPLAY_RIGHT (3bsd)
- implementations of splay and red-black trees
- splice_from_pipe_end (9)
- finish splicing from pipe
- splitdiff (1)
- separate out incremental patches
- splitfont (1)
- extract characters from an ISO-type font.
- spotlight (6x)
- move spotlight around desktop
- sprof (1)
- Read and display shared object profiling data
- sq_flush_range (9)
- Flush (prefetch) a specific SQ range
- sq_remap (9)
- Map a physical address through the Store Queues
- sqlite3 (n)
- an interface to the SQLite3 database engine
- sqlsharp (1)
- Mono SQL Query command-line tool
- squid (8)
- HTTP web proxy caching server
- squidclient (1)
- A simple HTTP web client tool
- srand48 (3p)
- seed the uniformly distributed double-precision pseudo...
- srcu_barrier (9)
- Wait until all in-flight call_srcu callbacks complete.
- srcu_batches_completed (9)
- return batches completed.
- srp_attach_transport (9)
- instantiate SRP transport template
- SRP_Calc_A (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_B (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_B_ex (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_client_key (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_client_key_ex (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_server_key (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_u (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_u_ex (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_x (3osslssl-3)
- SRP authentication primitives
- SRP_Calc_x_ex (3osslssl-3)
- SRP authentication primitives
- SRP_check_known_gN_param (3osslssl-3)
- SRP authentication primitives
- SRP_create_verifier (3osslssl-3)
- SRP authentication primitives
- SRP_create_verifier_BN (3osslssl-3)
- SRP authentication primitives
- SRP_create_verifier_BN_ex (3osslssl-3)
- SRP authentication primitives
- SRP_create_verifier_ex (3osslssl-3)
- SRP authentication primitives
- SRP_get_default_gN (3osslssl-3)
- SRP authentication primitives
- srp_remove_host (9)
- tear down a Scsi_Host's SRP data structures
- srp_rport_add (9)
- add a SRP remote port to the device hierarchy
- srp_start_tl_fail_timers (9)
- start the transport layer failure timers
- srp_stop_rport_timers (9)
- stop the transport layer recovery timers
- srp_tmo_valid (9)
- check timeout combination validity
- ss (8)
- another utility to investigate sockets
- ssconvert (1)
- a command line spreadsheet format converter
- ssdiff (1)
- compare two spreadsheets
- ssgrep (1)
- search spreadsheets for strings
- ssh (1)
- OpenSSH remote login client
- ssh-add (1)
- adds private key identities to the OpenSSH authenticat...
- ssh-agent (1)
- OpenSSH authentication agent
- ssh-copy-id (1)
- use locally available keys to authorise logins on a re...
- ssh-keygen (1)
- OpenSSH authentication key utility
- ssh-keyscan (1)
- gather SSH public keys from servers
- ssh-keysign (8)
- OpenSSH helper for host-based authentication
- ssh-pkcs11-helper (8)
- OpenSSH helper for PKCS#11 support
- ssh-sk-helper (8)
- OpenSSH helper for FIDO authenticator support
- ssh_config (5)
- OpenSSH client configuration file
- sshd (8)
- OpenSSH daemon
- sshd_config (5)
- OpenSSH daemon configuration file
- ssindex (1)
- generate index data for spreadsheet files
- SSL_accept (3osslssl-3)
- wait for a TLS/SSL client to initiate a TLS/SSL han...
- SSL_add0_chain_cert (3osslssl-3)
- extra chain certificate processing
- SSL_add1_chain_cert (3osslssl-3)
- extra chain certificate processing
- SSL_add1_host (3osslssl-3)
- SSL server verification parameters
- SSL_async_callback_fn (3osslssl-3)
- manage asynchronous operations
- SSL_build_cert_chain (3osslssl-3)
- extra chain certificate processing
- SSL_bytes_to_cipher_list (3osslssl-3)
- get list of available SSL_CIPHERs
- SSL_callback_ctrl (3osslssl-3)
- internal handling functions for SSL_CTX and ...
- SSL_check_chain (3osslssl-3)
- check certificate chain suitability
- SSL_check_private_key (3osslssl-3)
- load certificate and key data
- SSL_CIPHER_description (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_find (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_auth_nid (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_bits (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_cipher_nid (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_digest_nid (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_handshake_digest (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_id (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_kx_nid (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_name (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_protocol_id (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_get_version (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_is_aead (3osslssl-3)
- get SSL_CIPHER properties
- SSL_CIPHER_standard_name (3osslssl-3)
- get SSL_CIPHER properties
- SSL_clear (3osslssl-3)
- reset SSL object to allow another connection
- SSL_clear_chain_certs (3osslssl-3)
- extra chain certificate processing
- SSL_client_hello_cb_fn (3osslssl-3)
- callback functions for early server-sid...
- SSL_client_hello_get0_ciphers (3osslssl-3)
- callback functions for early ser...
- SSL_client_hello_get0_compression_met... (3osslssl-3)
- callback functions fo...
- SSL_client_hello_get0_ext (3osslssl-3)
- callback functions for early server-...
- SSL_client_hello_get0_legacy_version (3osslssl-3)
- callback functions for ea...
- SSL_client_hello_get0_random (3osslssl-3)
- callback functions for early serv...
- SSL_client_hello_get0_session_id (3osslssl-3)
- callback functions for early ...
- SSL_client_hello_get1_extensions_present (3osslssl-3)
- callback functions fo...
- SSL_client_hello_isv2 (3osslssl-3)
- callback functions for early server-side...
- SSL_client_version (3osslssl-3)
- get the protocol information of a connection
- SSL_COMP_add_compression_method (3osslssl-3)
- handle SSL/TLS integrated comp...
- SSL_COMP_free_compression_methods (3osslssl-3)
- handle SSL/TLS integrated co...
- SSL_COMP_get0_name (3osslssl-3)
- handle SSL/TLS integrated compression methods
- SSL_COMP_get_compression_methods (3osslssl-3)
- handle SSL/TLS integrated com...
- SSL_COMP_get_id (3osslssl-3)
- handle SSL/TLS integrated compression methods
- SSL_CONF_CTX_finish (3osslssl-3)
- set context to configure
- SSL_connect (3osslssl-3)
- initiate the TLS/SSL handshake with an TLS/SSL server
- SSL_ctrl (3osslssl-3)
- internal handling functions for SSL_CTX and SSL objects
- SSL_CTX_add0_chain_cert (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_add1_chain_cert (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_add_client_custom_ext (3osslssl-3)
- custom TLS extension handling
- SSL_CTX_add_custom_ext (3osslssl-3)
- custom TLS extension handling
- SSL_CTX_add_extra_chain_cert (3osslssl-3)
- add, get or clear extra chain cer...
- SSL_CTX_add_server_custom_ext (3osslssl-3)
- custom TLS extension handling
- SSL_CTX_add_session (3osslssl-3)
- manipulate session cache
- SSL_CTX_build_cert_chain (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_callback_ctrl (3osslssl-3)
- internal handling functions for SSL_CTX ...
- SSL_CTX_check_private_key (3osslssl-3)
- load certificate and key data
- SSL_CTX_clear_chain_certs (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_clear_extra_chain_certs (3osslssl-3)
- add, get or clear extra chain ...
- SSL_CTX_ctrl (3osslssl-3)
- internal handling functions for SSL_CTX and SSL o...
- SSL_CTX_dane_clear_flags (3osslssl-3)
- enable DANE TLS authentication of the...
- SSL_CTX_dane_enable (3osslssl-3)
- enable DANE TLS authentication of the remo...
- SSL_CTX_dane_mtype_set (3osslssl-3)
- enable DANE TLS authentication of the r...
- SSL_CTX_dane_set_flags (3osslssl-3)
- enable DANE TLS authentication of the r...
- SSL_CTX_flush_sessions (3osslssl-3)
- remove expired sessions
- SSL_CTX_get0_chain_cert_store (3osslssl-3)
- set certificate verification or ...
- SSL_CTX_get0_chain_certs (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_get_ciphers (3osslssl-3)
- get list of available SSL_CIPHERs
- SSL_CTX_get_client_cert_cb (3osslssl-3)
- handle client certificate callback ...
- SSL_CTX_get_default_read_ahead (3osslssl-3)
- manage whether to read as many ...
- SSL_CTX_get_extra_chain_certs (3osslssl-3)
- add, get or clear extra chain ce...
- SSL_CTX_get_extra_chain_certs_only (3osslssl-3)
- add, get or clear extra cha...
- SSL_CTX_get_info_callback (3osslssl-3)
- handle information callback for SSL ...
- SSL_CTX_get_max_cert_list (3osslssl-3)
- manipulate allowed size for the peer...
- SSL_CTX_get_num_tickets (3osslssl-3)
- control the number of TLSv1.3 session ...
- SSL_CTX_get_quiet_shutdown (3osslssl-3)
- manipulate shutdown behaviour
- SSL_CTX_get_read_ahead (3osslssl-3)
- manage whether to read as many input by...
- SSL_CTX_get_session_cache_mode (3osslssl-3)
- enable/disable session caching
- SSL_CTX_get_ssl_method (3osslssl-3)
- choose a new TLS/SSL method
- SSL_CTX_get_timeout (3osslssl-3)
- manipulate timeout values for session caching
- SSL_CTX_get_verify_depth (3osslssl-3)
- get currently set verification parame...
- SSL_CTX_has_client_custom_ext (3osslssl-3)
- check whether a handler exists f...
- SSL_CTX_remove_session (3osslssl-3)
- manipulate session cache
- SSL_CTX_select_current_cert (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_sess_accept (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_accept_good (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_accept_renegotiate (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_cache_full (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_cb_hits (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_connect (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_connect_good (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_connect_renegotiate (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_get_cache_size (3osslssl-3)
- manipulate session cache size
- SSL_CTX_sess_hits (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_misses (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_number (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sess_set_cache_size (3osslssl-3)
- manipulate session cache size
- SSL_CTX_sess_timeouts (3osslssl-3)
- obtain session cache statistics
- SSL_CTX_sessions (3osslssl-3)
- access internal session cache
- SSL_CTX_set0_chain (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_set0_chain_cert_store (3osslssl-3)
- set certificate verification or ...
- SSL_CTX_set0_tmp_dh_pkey (3osslssl-3)
- handle DH keys for ephemeral key exch...
- SSL_CTX_set1_chain (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_set1_chain_cert_store (3osslssl-3)
- set certificate verification or ...
- SSL_CTX_set1_client_sigalgs (3osslssl-3)
- set supported signature algorithms
- SSL_CTX_set1_sigalgs (3osslssl-3)
- set supported signature algorithms
- SSL_CTX_set1_sigalgs_list (3osslssl-3)
- set supported signature algorithms
- SSL_CTX_set_alpn_protos (3osslssl-3)
- handle application layer protocol nego...
- SSL_CTX_set_alpn_select_cb (3osslssl-3)
- handle application layer protocol n...
- SSL_CTX_set_async_callback (3osslssl-3)
- manage asynchronous operations
- SSL_CTX_set_async_callback_arg (3osslssl-3)
- manage asynchronous operations
- SSL_CTX_set_cert_cb (3osslssl-3)
- handle certificate callback function
- SSL_CTX_set_cipher_list (3osslssl-3)
- choose list of available SSL_CIPHERs
- SSL_CTX_set_ciphersuites (3osslssl-3)
- choose list of available SSL_CIPHERs
- SSL_CTX_set_client_cert_cb (3osslssl-3)
- handle client certificate callback ...
- SSL_CTX_set_client_hello_cb (3osslssl-3)
- callback functions for early serve...
- SSL_CTX_set_current_cert (3osslssl-3)
- extra chain certificate processing
- SSL_CTX_set_default_verify_paths (3osslssl-3)
- set default locations for tru...
- SSL_CTX_set_dh_auto (3osslssl-3)
- handle DH keys for ephemeral key exchange
- SSL_CTX_set_ecdh_auto (3osslssl-3)
- handle ECDH keys for ephemeral key exchange
- SSL_CTX_set_info_callback (3osslssl-3)
- handle information callback for SSL ...
- SSL_CTX_set_max_cert_list (3osslssl-3)
- manipulate allowed size for the peer...
- SSL_CTX_set_next_proto_select_cb (3osslssl-3)
- handle application layer prot...
- SSL_CTX_set_next_protos_advertised_cb (3osslssl-3)
- handle application layer...
- SSL_CTX_set_num_tickets (3osslssl-3)
- control the number of TLSv1.3 session ...
- SSL_CTX_set_post_handshake_auth (3osslssl-3)
- set various SSL/TLS parameters...
- SSL_CTX_set_psk_find_session_callback (3osslssl-3)
- set PSK identity hint to...
- SSL_CTX_set_psk_server_callback (3osslssl-3)
- set PSK identity hint to use
- SSL_CTX_set_quiet_shutdown (3osslssl-3)
- manipulate shutdown behaviour
- SSL_CTX_set_read_ahead (3osslssl-3)
- manage whether to read as many input by...
- SSL_CTX_set_session_cache_mode (3osslssl-3)
- enable/disable session caching
- SSL_CTX_set_session_id_context (3osslssl-3)
- set context within which sessio...
- SSL_CTX_set_srp_strength (3osslssl-3)
- SRP control operations
- SSL_CTX_set_ssl_version (3osslssl-3)
- choose a new TLS/SSL method
- SSL_CTX_set_timeout (3osslssl-3)
- manipulate timeout values for session caching
- SSL_CTX_set_tlsext_max_fragment_length (3osslssl-3)
- Control fragment size s...
- SSL_CTX_set_tlsext_servername_arg (3osslssl-3)
- handle server name indicatio...
- SSL_CTX_set_tlsext_servername_callback (3osslssl-3)
- handle server name indi...
- SSL_CTX_set_tmp_dh (3osslssl-3)
- handle DH keys for ephemeral key exchange
- SSL_CTX_set_tmp_dh_callback (3osslssl-3)
- handle DH keys for ephemeral key e...
- SSL_CTX_set_tmp_ecdh (3osslssl-3)
- handle ECDH keys for ephemeral key exchange
- SSL_CTX_set_verify_depth (3osslssl-3)
- set various SSL/TLS parameters for pe...
- SSL_CTX_use_certificate_chain_file (3osslssl-3)
- load certificate and key data
- SSL_CTX_use_psk_identity_hint (3osslssl-3)
- set PSK identity hint to use
- SSL_custom_ext_add_cb_ex (3osslssl-3)
- custom TLS extension handling
- SSL_custom_ext_free_cb_ex (3osslssl-3)
- custom TLS extension handling
- SSL_custom_ext_parse_cb_ex (3osslssl-3)
- custom TLS extension handling
- SSL_dane_clear_flags (3osslssl-3)
- enable DANE TLS authentication of the rem...
- SSL_dane_enable (3osslssl-3)
- enable DANE TLS authentication of the remote T...
- SSL_dane_set_flags (3osslssl-3)
- enable DANE TLS authentication of the remot...
- SSL_dane_tlsa_add (3osslssl-3)
- enable DANE TLS authentication of the remote...
- SSL_do_handshake (3osslssl-3)
- perform a TLS/SSL handshake
- SSL_extension_supported (3osslssl-3)
- custom TLS extension handling
- SSL_get0_alpn_selected (3osslssl-3)
- handle application layer protocol negot...
- SSL_get0_chain_cert_store (3osslssl-3)
- set certificate verification or chai...
- SSL_get0_chain_certs (3osslssl-3)
- extra chain certificate processing
- SSL_get0_dane_authority (3osslssl-3)
- enable DANE TLS authentication of the ...
- SSL_get0_dane_tlsa (3osslssl-3)
- enable DANE TLS authentication of the remot...
- SSL_get0_next_proto_negotiated (3osslssl-3)
- handle application layer protoc...
- SSL_get0_peer_certificate (3osslssl-3)
- get the X509 certificate of the peer
- SSL_get0_verified_chain (3osslssl-3)
- get the X509 certificate chain of the ...
- SSL_get0_verify_cert_store (3osslssl-3)
- set certificate verification or cha...
- SSL_get1_peer_certificate (3osslssl-3)
- get the X509 certificate of the peer
- SSL_get1_supported_ciphers (3osslssl-3)
- get list of available SSL_CIPHERs
- SSL_get_all_async_fds (3osslssl-3)
- manage asynchronous operations
- SSL_get_async_status (3osslssl-3)
- manage asynchronous operations
- SSL_get_changed_async_fds (3osslssl-3)
- manage asynchronous operations
- SSL_get_cipher (3osslssl-3)
- get SSL_CIPHER of a connection
- SSL_get_cipher_bits (3osslssl-3)
- get SSL_CIPHER of a connection
- SSL_get_cipher_list (3osslssl-3)
- get list of available SSL_CIPHERs
- SSL_get_cipher_name (3osslssl-3)
- get SSL_CIPHER of a connection
- SSL_get_cipher_version (3osslssl-3)
- get SSL_CIPHER of a connection
- SSL_get_ciphers (3osslssl-3)
- get list of available SSL_CIPHERs
- SSL_get_client_ciphers (3osslssl-3)
- get list of available SSL_CIPHERs
- SSL_get_current_cipher (3osslssl-3)
- get SSL_CIPHER of a connection
- SSL_get_info_callback (3osslssl-3)
- handle information callback for SSL conn...
- SSL_get_max_cert_list (3osslssl-3)
- manipulate allowed size for the peer's c...
- SSL_get_num_tickets (3osslssl-3)
- control the number of TLSv1.3 session tick...
- SSL_get_peer_cert_chain (3osslssl-3)
- get the X509 certificate chain of the ...
- SSL_get_peer_certificate (3osslssl-3)
- get the X509 certificate of the peer
- SSL_get_pending_cipher (3osslssl-3)
- get SSL_CIPHER of a connection
- SSL_get_psk_identity (3osslssl-3)
- get PSK client identity and hint
- SSL_get_psk_identity_hint (3osslssl-3)
- get PSK client identity and hint
- SSL_get_quiet_shutdown (3osslssl-3)
- manipulate shutdown behaviour
- SSL_get_read_ahead (3osslssl-3)
- manage whether to read as many input bytes ...
- SSL_get_servername (3osslssl-3)
- handle server name indication (SNI)
- SSL_get_servername_type (3osslssl-3)
- handle server name indication (SNI)
- SSL_get_shared_ciphers (3osslssl-3)
- get list of available SSL_CIPHERs
- SSL_get_shared_curve (3osslssl-3)
- EC supported curve functions
- SSL_get_shared_group (3osslssl-3)
- EC supported curve functions
- SSL_get_shared_sigalgs (3osslssl-3)
- get supported signature algorithms
- SSL_get_shutdown (3osslssl-3)
- manipulate shutdown state of an SSL connection
- SSL_get_sigalgs (3osslssl-3)
- get supported signature algorithms
- SSL_get_SSL_CTX (3osslssl-3)
- get the SSL_CTX from which an SSL is created
- SSL_get_ssl_method (3osslssl-3)
- choose a new TLS/SSL method
- SSL_get_state (3osslssl-3)
- retrieve information about the handshake state m...
- SSL_get_verify_depth (3osslssl-3)
- get currently set verification parameters
- SSL_get_version (3osslssl-3)
- get the protocol information of a connection
- SSL_has_matching_session_id (3osslssl-3)
- manipulate generation of SSL sessi...
- SSL_has_pending (3osslssl-3)
- check for readable bytes buffered in an SSL ob...
- SSL_in_accept_init (3osslssl-3)
- retrieve information about the handshake st...
- SSL_in_before (3osslssl-3)
- retrieve information about the handshake state m...
- SSL_in_connect_init (3osslssl-3)
- retrieve information about the handshake s...
- SSL_in_init (3osslssl-3)
- retrieve information about the handshake state mac...
- SSL_is_dtls (3osslssl-3)
- get the protocol information of a connection
- SSL_is_init_finished (3osslssl-3)
- retrieve information about the handshake ...
- SSL_is_server (3osslssl-3)
- functions for manipulating and examining the cli...
- SSL_library_init (3osslssl-3)
- initialize SSL library by registering algorithms
- SSL_new_session_ticket (3osslssl-3)
- control the number of TLSv1.3 session t...
- SSL_pending (3osslssl-3)
- check for readable bytes buffered in an SSL object
- SSL_psk_find_session_cb_func (3osslssl-3)
- set PSK identity hint to use
- SSL_psk_server_cb_func (3osslssl-3)
- set PSK identity hint to use
- SSL_select_current_cert (3osslssl-3)
- extra chain certificate processing
- SSL_select_next_proto (3osslssl-3)
- handle application layer protocol negoti...
- SSL_SESSION_get0_cipher (3osslssl-3)
- set and retrieve the SSL cipher associ...
- SSL_SESSION_get0_hostname (3osslssl-3)
- get and set SNI and ALPN data associ...
- SSL_SESSION_get0_id_context (3osslssl-3)
- get and set the SSL ID context ass...
- SSL_SESSION_get0_ticket (3osslssl-3)
- get details about the ticket associate...
- SSL_SESSION_get_compress_id (3osslssl-3)
- get details about the compression ...
- SSL_SESSION_get_id (3osslssl-3)
- get and set the SSL session ID
- SSL_SESSION_get_max_fragment_length (3osslssl-3)
- Control fragment size sett...
- SSL_SESSION_get_protocol_version (3osslssl-3)
- get and set the session proto...
- SSL_SESSION_get_ticket_lifetime_hint (3osslssl-3)
- get details about the tic...
- SSL_SESSION_has_ticket (3osslssl-3)
- get details about the ticket associated...
- SSL_SESSION_is_resumable (3osslssl-3)
- determine whether an SSL_SESSION obje...
- SSL_session_reused (3osslssl-3)
- query whether a reused session was negotiat...
- SSL_SESSION_set1_hostname (3osslssl-3)
- get and set SNI and ALPN data associ...
- SSL_SESSION_set1_id (3osslssl-3)
- get and set the SSL session ID
- SSL_SESSION_set1_id_context (3osslssl-3)
- get and set the SSL ID context ass...
- SSL_SESSION_set_cipher (3osslssl-3)
- set and retrieve the SSL cipher associa...
- SSL_SESSION_set_protocol_version (3osslssl-3)
- get and set the session proto...
- SSL_set0_chain (3osslssl-3)
- extra chain certificate processing
- SSL_set0_chain_cert_store (3osslssl-3)
- set certificate verification or chai...
- SSL_set0_rbio (3osslssl-3)
- connect the SSL object with a BIO
- SSL_set0_tmp_dh_pkey (3osslssl-3)
- handle DH keys for ephemeral key exchange
- SSL_set0_verify_cert_store (3osslssl-3)
- set certificate verification or cha...
- SSL_set0_wbio (3osslssl-3)
- connect the SSL object with a BIO
- SSL_set1_chain (3osslssl-3)
- extra chain certificate processing
- SSL_set1_chain_cert_store (3osslssl-3)
- set certificate verification or chai...
- SSL_set1_client_sigalgs (3osslssl-3)
- set supported signature algorithms
- SSL_set1_client_sigalgs_list (3osslssl-3)
- set supported signature algorithms
- SSL_set1_host (3osslssl-3)
- SSL server verification parameters
- SSL_set1_sigalgs (3osslssl-3)
- set supported signature algorithms
- SSL_set1_sigalgs_list (3osslssl-3)
- set supported signature algorithms
- SSL_set1_verify_cert_store (3osslssl-3)
- set certificate verification or cha...
- SSL_set_alpn_protos (3osslssl-3)
- handle application layer protocol negotiat...
- SSL_set_async_callback (3osslssl-3)
- manage asynchronous operations
- SSL_set_async_callback_arg (3osslssl-3)
- manage asynchronous operations
- SSL_set_bio (3osslssl-3)
- connect the SSL object with a BIO
- SSL_set_cert_cb (3osslssl-3)
- handle certificate callback function
- SSL_set_cipher_list (3osslssl-3)
- choose list of available SSL_CIPHERs
- SSL_set_ciphersuites (3osslssl-3)
- choose list of available SSL_CIPHERs
- SSL_set_current_cert (3osslssl-3)
- extra chain certificate processing
- SSL_set_dh_auto (3osslssl-3)
- handle DH keys for ephemeral key exchange
- SSL_set_ecdh_auto (3osslssl-3)
- handle ECDH keys for ephemeral key exchange
- SSL_set_fd (3osslssl-3)
- connect the SSL object with a file descriptor
- SSL_set_hostflags (3osslssl-3)
- SSL server verification parameters
- SSL_set_info_callback (3osslssl-3)
- handle information callback for SSL conn...
- SSL_set_max_cert_list (3osslssl-3)
- manipulate allowed size for the peer's c...
- SSL_set_num_tickets (3osslssl-3)
- control the number of TLSv1.3 session tick...
- SSL_set_post_handshake_auth (3osslssl-3)
- set various SSL/TLS parameters for...
- SSL_set_psk_find_session_callback (3osslssl-3)
- set PSK identity hint to use
- SSL_set_psk_server_callback (3osslssl-3)
- set PSK identity hint to use
- SSL_set_quiet_shutdown (3osslssl-3)
- manipulate shutdown behaviour
- SSL_set_read_ahead (3osslssl-3)
- manage whether to read as many input bytes ...
- SSL_set_retry_verify (3osslssl-3)
- indicate that certificate verification sh...
- SSL_set_rfd (3osslssl-3)
- connect the SSL object with a file descriptor
- SSL_set_session_id_context (3osslssl-3)
- set context within which session ca...
- SSL_set_shutdown (3osslssl-3)
- manipulate shutdown state of an SSL connection
- SSL_set_ssl_method (3osslssl-3)
- choose a new TLS/SSL method
- SSL_set_tlsext_host_name (3osslssl-3)
- handle server name indication (SNI)
- SSL_set_tlsext_max_fragment_length (3osslssl-3)
- Control fragment size setti...
- SSL_set_tmp_dh (3osslssl-3)
- handle DH keys for ephemeral key exchange
- SSL_set_tmp_dh_callback (3osslssl-3)
- handle DH keys for ephemeral key exchange
- SSL_set_tmp_ecdh (3osslssl-3)
- handle ECDH keys for ephemeral key exchange
- SSL_set_verify_depth (3osslssl-3)
- set various SSL/TLS parameters for peer c...
- SSL_set_wfd (3osslssl-3)
- connect the SSL object with a file descriptor
- SSL_shutdown (3osslssl-3)
- shut down a TLS/SSL connection
- SSL_use_certificate_chain_file (3osslssl-3)
- load certificate and key data
- SSL_use_psk_identity_hint (3osslssl-3)
- set PSK identity hint to use
- SSL_verify_client_post_handshake (3osslssl-3)
- set various SSL/TLS parameter...
- SSL_version (3osslssl-3)
- get the protocol information of a connection
- SSL_waiting_for_async (3osslssl-3)
- manage asynchronous operations
- SSL_want_client_hello_cb (3osslssl-3)
- obtain state information TLS/SSL I/O ...
- SSL_want_nothing (3osslssl-3)
- obtain state information TLS/SSL I/O operation
- SSLv23_client_method (3osslssl-3)
- create a new SSL_CTX object as framework ...
- SSLv23_method (3osslssl-3)
- create a new SSL_CTX object as framework for TLS...
- SSLv23_server_method (3osslssl-3)
- create a new SSL_CTX object as framework ...
- SSLv3_client_method (3osslssl-3)
- create a new SSL_CTX object as framework f...
- SSLv3_method (3osslssl-3)
- create a new SSL_CTX object as framework for TLS/...
- SSLv3_server_method (3osslssl-3)
- create a new SSL_CTX object as framework f...
- stable (3)
- Experimental features made easy, once we know they're ...
- STAILQ_FOREACH (3bsd)
- implementations of singly-linked lists, singly-linked...
- STAILQ_FOREACH_FROM (3bsd)
- implementations of singly-linked lists, singly-l...
- STAILQ_FOREACH_FROM_SAFE (3bsd)
- implementations of singly-linked lists, sin...
- STAILQ_FOREACH_SAFE (3bsd)
- implementations of singly-linked lists, singly-l...
- STAILQ_HEAD (3bsd)
- implementations of singly-linked lists, singly-linked ...
- STAILQ_HEAD_INITIALIZER (3bsd)
- implementations of singly-linked lists, sing...
- STAILQ_INSERT_HEAD (3bsd)
- implementations of singly-linked lists, singly-li...
- STAILQ_REMOVE_HEAD (3bsd)
- implementations of singly-linked lists, singly-li...
- stairs (6x)
- Escher's infinite staircase.
- standend (3ncurses)
- curses character and window attribute control routines
- standout (3ncurses)
- curses character and window attribute control routines
- stap-report (1)
- collect system information that is useful for debuggin...
- stappaths (7)
- systemtap configurable file paths
- stapsh (8)
- (unknown subject)
- starfish (6x)
- radially-symmetric throbbing colormap-hacking graphics...
- starget_for_each_device (9)
- helper to walk all devices of a target
- startproc (8)
- Start processes identified by path name
- starwars (6x)
- draws a perspective text crawl, like at the beginning ...
- stdarg.h (0p)
- handle variable argument list
- stdbool.h (0p)
- boolean type and values
- stdbuf (1)
- Run COMMAND, with modified buffering operations for it...
- stddef.h (0p)
- standard type definitions
- stdint.h (0p)
- integer types
- stdio.h (0p)
- standard buffered input/output
- stdlib.h (0p)
- standard library definitions
- storeid_file_rewrite (8)
- File based Store-ID helper for Squid
- stpcpy (3p)
- copy a string and return a pointer to the end of the r...
- stpncpy (3p)
- copy fixed length string, returning a pointer to the a...
- strcat (9)
- Append one NUL-terminated string to another
- strchr (3)
- locate character in string
- strchr (3p)
- string scanning operation
- strchr (9)
- Find the first occurrence of a character in a string
- strchrnul (3)
- locate character in string
- strchrnul (9)
- Find and return a character in a string, or end of string
- strcoll (3)
- compare two strings using the current locale
- strcpy (3p)
- copy a string and return a pointer to the end of the r...
- strcspn (3)
- get length of a prefix substring
- strcspn (3p)
- get the length of a complementary substring
- strcspn (9)
- Calculate the length of the initial substring of s whi...
- stream (1)
- a lightweight tool to stream one or more pixel compone...
- strequate (3)
- map a list of characters to the same value
- streqvcmp (3)
- compare two strings with an equivalence mapping
- streqvmap (3)
- Set the character mappings for the streqv functions
- strictures::extra (3)
- enable or disable strictures additional checks
- strictures::extra (3pm)
- enable or disable strictures additional checks
- strim (9)
- Removes leading and trailing whitespace from s.
- string.h (0p)
- string operations
- String::Escape (3pm)
- Backslash escapes, quoted phrase, word elision, etc.
- stringprep_check_version (3)
- API function
- stringprep_locale_charset (3)
- API function
- stringprep_unichar_to_utf8 (3)
- API function
- stringprep_utf8_to_unichar (3)
- API function
- strings (1)
- print the sequences of printable characters in files
- strings.h (0p)
- string operations
- strip (1)
- discard symbols and other data from object files
- strlcat (9)
- Append a length-limited, C-string to another
- strlen (3)
- calculate the length of a string
- strlen (3p)
- get length of fixed size string
- strlen (9)
- Find the length of a string
- strncat (3p)
- concatenate a string with part of another
- strncat (9)
- Append a length-limited, C-string to another
- strnchr (9)
- Find a character in a length limited string
- strncmp (9)
- Compare two length-limited strings
- strncpy (3p)
- copy fixed length string, returning a pointer to the a...
- strncpy (9)
- Copy a length-limited, C-string
- strneqvcmp (3)
- compare two strings with an equivalence mapping
- strnicmp (9)
- Case insensitive, length-limited string comparison
- strnlen (3)
- determine the length of a fixed-size string
- strnlen (3p)
- get length of fixed size string
- strnlen (9)
- Find the length of a length-limited string
- strnstr (9)
- Find the first substring in a length-limited string
- strnunvis (3bsd)
- decode a visual representation of characters
- strunvis (3bsd)
- decode a visual representation of characters
- stropts.h (0p)
- STREAMS interface (STREAMS)
- strpbrk (3)
- search a string for any of a set of bytes
- strpbrk (9)
- Find the first occurrence of a set of characters
- strrchr (3)
- locate character in string
- strrchr (3p)
- string scanning operation
- strrchr (9)
- Find the last occurrence of a character in a string
- strspn (3)
- get length of a prefix substring
- strspn (3p)
- get length of a substring
- strspn (9)
- Calculate the length of the initial substring of s whi...
- strstr (9)
- Find the first substring in a NUL terminated string
- struct_bus_type (9)
- The bus type of the device
- struct_ccw1 (9)
- channel command word
- struct_ccw_device (9)
- channel attached device
- struct_ccw_driver (9)
- device driver for channel attached devices
- struct_cfg80211_auth_request (9)
- Authentication request data
- struct_cfg80211_deauth_request (9)
- Deauthentication request data
- struct_clk_notifier (9)
- associate a clk with a notifier
- struct_clk_notifier_data (9)
- rate data to pass to the notifier callback
- struct_cputime (9)
- snaphsot of system and user cputime
- struct_device (9)
- The basic device structure
- struct_device_driver (9)
- The basic device driver structure
- struct_drm_dp_aux (9)
- DisplayPort AUX channel
- struct_drm_dp_aux_msg (9)
- DisplayPort AUX channel transaction
- struct_drm_fb_helper_funcs (9)
- driver callbacks for the fbdev emulation lib...
- struct_erw_eadm (9)
- EADM Subchannel extended report word
- struct_esw_eadm (9)
- EADM Subchannel Extended Status Word (ESW)
- struct_futex_q (9)
- The hashed futex queue entry, one per waiting task
- struct_gnet_stats_basic (9)
- byte/packet throughput statistics
- struct_handle_s (9)
- this is the concrete type associated with handle_t.
- struct_hrtimer (9)
- the basic hrtimer structure
- struct_hrtimer_clock_base (9)
- the timer base for a specific clock
- struct_hrtimer_sleeper (9)
- simple sleeper structure
- struct_hsi_board_info (9)
- HSI client board info
- struct_hsi_channel (9)
- channel resource used by the hsi clients
- struct_hsi_client (9)
- HSI client attached to an HSI port
- struct_hsi_client_driver (9)
- Driver associated to an HSI client
- struct_hsi_config (9)
- Configuration for RX/TX HSI modules
- struct_hsi_controller (9)
- HSI controller device
- struct_hsi_msg (9)
- HSI message descriptor
- struct_hsi_port (9)
- HSI port device
- struct_i2c_algorithm (9)
- represent I2C transfer method
- struct_ieee80211_channel (9)
- channel definition
- struct_ieee80211_conf (9)
- configuration of the device
- struct_ieee80211_hw (9)
- hardware information and state
- struct_ieee80211_ops (9)
- callbacks from mac80211 to the driver
- struct_ieee80211_radiotap_iterator (9)
- tracks walk thru present radiotap args
- struct_ieee80211_sta_ht_cap (9)
- STA's HT capabilities
- struct_ieee80211_tpt_blink (9)
- throughput blink description
- struct_input_handle (9)
- links input device with an input handler
- struct_input_handler (9)
- implements one of interfaces for input devices
- struct_input_mt_slot (9)
- represents the state of an input MT slot
- struct_irq_affinity_notify (9)
- context for notification of IRQ affinity cha...
- struct_irq_chip (9)
- hardware interrupt chip descriptor
- struct_irq_chip_generic (9)
- Generic irq chip data structure
- struct_irq_chip_regs (9)
- register offsets for struct irq_gci
- struct_irq_chip_type (9)
- Generic interrupt chip instance for a flow type
- struct_irq_data (9)
- per irq and irq chip data passed down to chip functions
- struct_journal_s (9)
- this is the concrete type associated with journal_t.
- struct_kgdb_arch (9)
- Describe architecture specific values.
- struct_kgdb_io (9)
- Describe the interface for an I/O driver to talk with ...
- struct_mpath_info (9)
- mesh path information
- struct_nand_chip (9)
- NAND Private Flash Chip Data
- struct_nand_flash_dev (9)
- NAND Flash Device ID Structure
- struct_nand_hw_control (9)
- Control structure for hardware controller (e.g E...
- struct_nand_manufacturers (9)
- NAND Flash Manufacturer ID Structure
- struct_platform_nand_chip (9)
- chip level device structure
- struct_skb_shared_hwtstamps (9)
- hardware time stamps
- struct_spi_driver (9)
- Host side protocol driver
- struct_sublog (9)
- subchannel logout area
- struct_survey_info (9)
- channel survey response
- struct_thread_group_cputimer (9)
- thread group interval timer counts
- struct_usb_class_driver (9)
- identifies a USB driver that wants to use the U...
- struct_usb_host_config (9)
- representation of a device's configuration
- struct_usb_host_endpoint (9)
- host-side endpoint descriptor and queue
- struct_usb_interface (9)
- what usb device drivers talk to
- struct_usb_interface_cache (9)
- long-term representation of a device interface
- struct_usb_os_desc (9)
- describes OS descriptors associated with one interface
- struct_usb_os_desc_table (9)
- describes OS descriptors associated with one i...
- struct_usb_sg_request (9)
- support for scatter/gather I/O
- struct_w1_async_cmd (9)
- execute callback from the w1_process kthread
- struct_w1_netlink_cmd (9)
- holds the command and data
- struct_w1_netlink_msg (9)
- holds w1 message type, id, and result
- struct_w1_slave (9)
- holds a single slave device on the bus
- struct_wiphy (9)
- wireless hardware description
- strvis (3bsd)
- visually encode characters
- strvisx (3bsd)
- visually encode characters
- stty (1)
- change and print terminal line settings
- stty (1p)
- set the options for a terminal
- su (1)
- run a command with substitute user and group ID
- submit_bio (9)
- submit a bio to the block device layer for I/O
- subst (n)
- Perform backslash, command, and variable substitutions
- subsys_dev_iter_exit (9)
- finish iteration
- subsys_dev_iter_next (9)
- iterate to the next device
- subsys_find_device_by_id (9)
- find a device with a specific enumeration number
- sudo (8)
- execute a command as another user
- sudoedit (8)
- execute a command as another user
- suexec (8)
- Switch user before executing external programs
- sum (1)
- checksum and count the blocks in a file
- sum (n)
- Calculate a sum(1) compatible checksum
- superhyway_add_device (9)
- Add a SuperHyway module
- superhyway_register_driver (9)
- Register a new SuperHyway driver
- superhyway_unregister_driver (9)
- Unregister a SuperHyway driver
- superquadrics (6x)
- morphing 3d shapes.
- susetags2solv (1)
- convert the susetags repository format into a solv file
- svc_reserve (9)
- change the space reserved for the reply to a request.
- svc_xprt_names (9)
- format a buffer with a list of transport names
- svcerr_auth (3)
- library routines for remote procedure calls
- svcerr_weakauth (3)
- library routines for remote procedure calls
- svipc (7)
- System V interprocess communication mechanisms
- SVN::Core (3pm)
- Core module of the subversion perl bindings
- svnserve (8)
- Server for the 'svn' repository access method
- svnsync (1)
- Subversion repository synchronization tool
- swap_buf_le16 (9)
- swap halves of 16-bit words in place
- swaplabel (8)
- print or change the label or UUID of a swap area
- switch (n)
- Evaluate one of several scripts, depending on a given ...
- switch_root (8)
- switch to another filesystem as the root of the mount ...
- swprintf (3)
- formatted wide-character output conversion
- swprintf (3p)
- print formatted wide-character output
- swscanf (3p)
- convert formatted wide-character input
- Symbol (3)
- manipulate Perl symbols and their names
- symlink (7)
- symbolic link handling
- synaptics (4)
- touchpad input driver
- sync (1)
- Synchronize cached writes to persistent storage
- sync (2)
- commit buffer cache to disk
- sync (3p)
- schedule file system updates
- sync_file_range (2)
- sync a file segment with disk
- sync_file_range2 (2)
- sync a file segment with disk
- syncfs (2)
- commit buffer cache to disk
- synchronize_hardirq (9)
- wait for pending hard IRQ handlers (on other CPUs)
- synchronize_irq (9)
- wait for pending IRQ handlers (on other CPUs)
- synchronize_net (9)
- Synchronize with packet receive processing
- synchronize_rcu (9)
- wait until a grace period has elapsed.
- synchronize_rcu_bh (9)
- wait until an rcu_bh grace period has elapsed.
- synchronize_rcu_expedited (9)
- Brute-force RCU grace period
- synchronize_sched (9)
- wait until an rcu-sched grace period has elapsed.
- synchronize_sched_expedited (9)
- Brute-force RCU-sched grace period
- synchronize_srcu (9)
- wait for prior SRCU read-side critical-section completion
- synchronize_srcu_expedited (9)
- Brute-force SRCU grace period
- synctex (1)
- command line client tool to support the Synchronize Te...
- synctex (5)
- Synchronize TeXnology help file
- syndaemon (1)
- a program that monitors keyboard activity and disables...
- sys_ipc.h (0p)
- XSI interprocess communication access structure
- sys_mman.h (0p)
- memory management declarations
- sys_msg.h (0p)
- XSI message queue structures
- sys_resource.h (0p)
- definitions for XSI resource operations
- sys_select.h (0p)
- select types
- sys_sem.h (0p)
- XSI semaphore facility
- sys_shm.h (0p)
- XSI shared memory facility
- sys_socket.h (0p)
- main sockets header
- sys_stat.h (0p)
- data returned by the statfunction
- sys_statvfs.h (0p)
- VFS File System information structure
- sys_time.h (0p)
- time types
- sys_times.h (0p)
- file access and modification times structure
- sys_types.h (0p)
- data types
- sys_uio.h (0p)
- definitions for vector I/O operations
- sys_un.h (0p)
- definitions for UNIX domain sockets
- sys_utsname.h (0p)
- system name structure
- sys_wait.h (0p)
- declarations for waiting
- Sys::Hostname (3)
- Try every conceivable way to get hostname
- Sys::Hostname::Long (3pm)
- Try every conceivable way to get full hostname
- Sys::Syslog (3)
- Perl interface to the UNIX syslog(3) calls
- sys_get_robust_list (9)
- Get the robust-futex list head of a task
- sys_rt_sigpending (9)
- examine a pending signal that has been raised while b...
- sys_rt_sigprocmask (9)
- change the list of currently blocked signals
- sys_rt_sigsuspend (9)
- replace the signal mask for a value with the unewset ...
- sys_rt_sigtimedwait (9)
- synchronously wait for queued signals specified in ...
- sys_set_robust_list (9)
- Set the robust-futex list head of a task
- sys_sigprocmask (9)
- examine and change blocked signals
- sys_tgkill (9)
- send signal to one specific thread
- syscore_resume (9)
- Execute all the registered system core resume callbacks.
- syscore_suspend (9)
- Execute all the registered system core suspend callbacks.
- sysfs_chmod_file (9)
- update the modified mode value on an object attribute.
- sysfs_create_file_ns (9)
- create an attribute file for an object with custom ns
- sysfs_remove_file_ns (9)
- remove an object attribute with a custom ns tag
- syslinux (1)
- install the SYSLINUX bootloader on a FAT filesystem
- syslog (3)
- send messages to the system logger
- syslog (8)
- the system logging service
- syslog.h (0p)
- definitions for system error logging
- system (3)
- execute a shell command
- systemctl (1)
- Control the systemd system and service manager
- systemd-ask-password (1)
- Query the user for a system password
- systemd-ask-password-console.path (8)
- Query the user for system passwords o...
- systemd-ask-password-console.service (8)
- Query the user for system password...
- systemd-ask-password-wall.path (8)
- Query the user for system passwords on t...
- systemd-ask-password-wall.service (8)
- Query the user for system passwords o...
- systemd-backlight (8)
- Load and save the display backlight brightness at boo...
- systemd-backlight@.service (8)
- Load and save the display backlight brightne...
- systemd-bootchart (1)
- Boot performance graphing tool
- systemd-cat (1)
- Connect a pipeline or program's output with the journal
- systemd-cgls (1)
- Recursively show control group contents
- systemd-cgtop (1)
- Show top control groups by their resource usage
- systemd-coredumpctl (1)
- Retrieve coredumps from the journal
- systemd-efi-boot-generator (8)
- Generator for automatically mounting the EFI...
- systemd-fsck (8)
- File system checker logic
- systemd-fsck-root.service (8)
- File system checker logic
- systemd-fsck@.service (8)
- File system checker logic
- systemd-getty-generator (8)
- Generator for enabling getty instances on the c...
- systemd-halt.service (8)
- System shutdown logic
- systemd-hibernate.service (8)
- System sleep state logic
- systemd-hostnamed (8)
- Host name bus mechanism
- systemd-hostnamed.service (8)
- Host name bus mechanism
- systemd-hybrid-sleep.service (8)
- System sleep state logic
- systemd-inhibit (1)
- Execute a program with an inhibition lock taken
- systemd-journalctl (1)
- Query the systemd journal
- systemd-kexec.service (8)
- System shutdown logic
- systemd-localed (8)
- Locale bus mechanism
- systemd-localed.service (8)
- Locale bus mechanism
- systemd-loginctl (1)
- Control the systemd login manager
- systemd-machine-id-setup (1)
- Initialize the machine ID in /etc/machine-id
- systemd-machined (8)
- Virtual machine and container registration manager
- systemd-machined.service (8)
- Virtual machine and container registration man...
- systemd-poweroff.service (8)
- System shutdown logic
- systemd-quotacheck (8)
- File system quota checker logic
- systemd-quotacheck.service (8)
- File system quota checker logic
- systemd-random-seed (8)
- Load and save the system random seed at boot and sh...
- systemd-random-seed.service (8)
- Load and save the system random seed at boo...
- systemd-readahead (8)
- Disk read ahead logic
- systemd-readahead-collect.service (8)
- Disk read ahead logic
- systemd-readahead-done.service (8)
- Disk read ahead logic
- systemd-readahead-done.timer (8)
- Disk read ahead logic
- systemd-readahead-replay.service (8)
- Disk read ahead logic
- systemd-reboot.service (8)
- System shutdown logic
- systemd-rfkill (8)
- Load and save the RF kill switch state at boot and shu...
- systemd-rfkill@.service (8)
- Load and save the RF kill switch state at boot ...
- systemd-shutdown (8)
- System shutdown logic
- systemd-shutdownd (8)
- Scheduled shutdown service
- systemd-shutdownd.service (8)
- Scheduled shutdown service
- systemd-shutdownd.socket (8)
- Scheduled shutdown service
- systemd-sleep.conf (5)
- Suspend and hibernation configuration file
- systemd-socket-proxyd (8)
- Bidirectionally proxy local sockets to another (p...
- systemd-timedated (8)
- Time and date bus mechanism
- systemd-timedated.service (8)
- Time and date bus mechanism
- systemd-update-utmp (8)
- Write audit and utmp updates at bootup, runlevel ch...
- systemd-user-sessions (8)
- Permit user logins after boot, prohibit user logi...
- systemd-user-sessions.service (8)
- Permit user logins after boot, prohibit u...
- systemd-vconsole-setup (8)
- Configure the virtual console at boot
- systemd-vconsole-setup.service (8)
- Configure the virtual console at boot
- systemd.index (7)
- List all manpages from the systemd project
- systemd.path (5)
- Path unit configuration
- systemd.snapshot (5)
- Snapshot unit configuration
- sysv_signal (3)
- signal handling with System V semantics
- t1lint (1)
- check a PostScript Type 1 font for correctness
- tack (1)
- terminfo action checker
- tag_pages_for_writeback (9)
- tag pages to be written by write_cache_pages
- tail (1)
- output the last part of files
- tail (1p)
- copy the last part of a file
- tailcall (n)
- Replace the current procedure with another command
- tailf (1)
- follow the growth of a log file
- TAILQ_FOREACH (3bsd)
- implementations of singly-linked lists, singly-linked ...
- TAILQ_FOREACH_FROM (3bsd)
- implementations of singly-linked lists, singly-li...
- TAILQ_FOREACH_FROM_SAFE (3bsd)
- implementations of singly-linked lists, sing...
- TAILQ_FOREACH_REVERSE (3bsd)
- implementations of singly-linked lists, singly...
- TAILQ_FOREACH_REVERSE_FROM (3bsd)
- implementations of singly-linked lists, s...
- TAILQ_FOREACH_REVERSE_FROM_SAFE (3bsd)
- implementations of singly-linked lis...
- TAILQ_FOREACH_REVERSE_SAFE (3bsd)
- implementations of singly-linked lists, s...
- TAILQ_FOREACH_SAFE (3bsd)
- implementations of singly-linked lists, singly-li...
- TAILQ_HEAD_INITIALIZER (3bsd)
- implementations of singly-linked lists, singl...
- talk (1)
- talk to another user
- talk (1p)
- talk to another user
- talloc (3)
- hierarchical reference counted memory pool system with...
- tangram (6x)
- watch the computer solve tangram puzzles.
- tanh (3)
- hyperbolic tangent function
- tanh (3p)
- hyperbolic tangent functions
- tanhf (3)
- hyperbolic tangent function
- tanhl (3)
- hyperbolic tangent function
- tar (1)
- The GNU version of the tar archiving utility
- tar.h (0p)
- extended tar definitions
- task_nice (9)
- return the nice value of a given task.
- tc (8)
- show / manipulate traffic control settings
- tc-codel (8)
- Controlled-Delay Active Queue Management algorithm
- tc-hfsc (7)
- Hierarchical Fair Service Curve
- tca_correct (1)
- Calculate transverse chromatic aberration
- tcflow (3p)
- suspend or restart the transmission or reception of data
- tcflush (3)
- get and set terminal attributes, line control, get and...
- tcflush (3p)
- flush non-transmitted output data, non-read input data...
- tcgetattr (3p)
- get the parameters associated with the terminal
- tcgetpgrp (3p)
- get the foreground process group ID
- tcgetsid (3p)
- get the process group ID for the session leader for th...
- tcllib_string (n)
- Read-only in-memory channel
- textwindow (n)
- Textwindow channel
- tcllib_variable (n)
- In-memory channel using variable for storage
- zero (n)
- Zero channel
- tcl_prefix (n)
- facilities for prefix matching
- transformcore (n)
- Basic reflected/virtual channel transform support
- Tcl_Access (3)
- check file permissions and other attributes
- Tcl_AddErrorInfo (3)
- retrieve or record information about errors and other ...
- Tcl_AddObjErrorInfo (3)
- retrieve or record information about errors and oth...
- Tcl_AlertNotifier (3)
- the event queue and notifier interfaces
- Tcl_Alloc (3)
- allocate or free heap memory
- Tcl_AllocStatBuf (3)
- procedures to interact with any filesystem
- Tcl_AsyncCreate (3)
- handle asynchronous events
- Tcl_AsyncDelete (3)
- handle asynchronous events
- Tcl_AsyncInvoke (3)
- handle asynchronous events
- Tcl_AsyncMark (3)
- handle asynchronous events
- Tcl_AsyncReady (3)
- handle asynchronous events
- Tcl_AttemptAlloc (3)
- allocate or free heap memory
- Tcl_AttemptRealloc (3)
- allocate or free heap memory
- Tcl_AttemptSetObjLength (3)
- manipulate Tcl values as strings
- Tcl_BackgroundError (3)
- report Tcl exception that occurred in background pr...
- Tcl_BackgroundException (3)
- report Tcl exception that occurred in backgroun...
- Tcl_Backslash (3)
- parse a backslash sequence
- Tcl_BadChannelOption (3)
- procedures for creating and manipulating channels
- Tcl_CallWhenDeleted (3)
- Arrange for callback when interpreter is deleted
- Tcl_CancelIdleCall (3)
- invoke a procedure when there are no pending events
- Tcl_ChannelBlockModeProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelBuffered (3)
- procedures for creating and manipulating channels
- Tcl_ChannelClose2Proc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelCloseProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelFlushProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelGetHandleProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelGetOptionProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelHandlerProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelInputProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelName (3)
- procedures for creating and manipulating channels
- Tcl_ChannelOutputProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelSeekProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelSetOptionProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelThreadActionProc (3)
- procedures for creating and manipulating ch...
- Tcl_ChannelTruncateProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelVersion (3)
- procedures for creating and manipulating channels
- Tcl_ChannelWatchProc (3)
- procedures for creating and manipulating channels
- Tcl_ChannelWideSeekProc (3)
- procedures for creating and manipulating channels
- Tcl_Chdir (3)
- manipulate the current working directory
- Tcl_ClassSetConstructor (3)
- manipulate methods and method-call contexts
- Tcl_ClassSetDestructor (3)
- manipulate methods and method-call contexts
- Tcl_ClearChannelHandlers (3)
- procedures for creating and manipulating channels
- Tcl_Close (3)
- buffered I/O facilities using channels
- Tcl_CommandComplete (3)
- Check for unmatched braces in a Tcl command
- Tcl_ConditionFinalize (3)
- Tcl thread support
- Tcl_ConditionNotify (3)
- Tcl thread support
- Tcl_ConditionWait (3)
- Tcl thread support
- Tcl_CreateAlias (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_CreateAliasObj (3)
- manage multiple Tcl interpreters, aliases and hidden...
- Tcl_CreateChannel (3)
- procedures for creating and manipulating channels
- Tcl_CreateChannelHandler (3)
- call a procedure when a channel becomes readab...
- Tcl_CreateCloseHandler (3)
- arrange for callbacks when channels are closed
- Tcl_CreateEventSource (3)
- the event queue and notifier interfaces
- Tcl_CreateExitHandler (3)
- end the application or thread (and invoke exit ha...
- Tcl_CreateFileHandler (3)
- associate procedure callbacks with files or devic...
- Tcl_CreateHashEntry (3)
- procedures to manage hash tables
- Tcl_CreateMathFunc (3)
- Define, query and enumerate math functions for expre...
- Tcl_CreateSlave (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_CreateThread (3)
- Tcl thread support
- Tcl_CreateThreadExitHandler (3)
- end the application or thread (and invoke e...
- Tcl_CreateTimerHandler (3)
- call a procedure at a given time
- Tcl_CutChannel (3)
- procedures for creating and manipulating channels
- Tcl_DeleteChannelHandler (3)
- call a procedure when a channel becomes readab...
- Tcl_DeleteCloseHandler (3)
- arrange for callbacks when channels are closed
- Tcl_DeleteEvents (3)
- the event queue and notifier interfaces
- Tcl_DeleteEventSource (3)
- the event queue and notifier interfaces
- Tcl_DeleteExitHandler (3)
- end the application or thread (and invoke exit ha...
- Tcl_DeleteFileHandler (3)
- associate procedure callbacks with files or devic...
- Tcl_DeleteHashEntry (3)
- procedures to manage hash tables
- Tcl_DeleteHashTable (3)
- procedures to manage hash tables
- Tcl_DeleteThreadExitHandler (3)
- end the application or thread (and invoke e...
- Tcl_DeleteTimerHandler (3)
- call a procedure at a given time
- Tcl_DetachChannel (3)
- buffered I/O facilities using channels
- Tcl_DetachPids (3)
- manage child processes in background
- Tcl_DontCallWhenDeleted (3)
- Arrange for callback when interpreter is deleted
- Tcl_DoOneEvent (3)
- wait for events and invoke event handlers
- Tcl_DoWhenIdle (3)
- invoke a procedure when there are no pending events
- Tcl_DStringLength (3)
- manipulate dynamic strings
- Tcl_DStringSetLength (3)
- manipulate dynamic strings
- Tcl_Eof (3)
- buffered I/O facilities using channels
- Tcl_EventuallyFree (3)
- avoid freeing storage while it is being used
- Tcl_Exit (3)
- end the application or thread (and invoke exit handlers)
- Tcl_ExitThread (3)
- end the application or thread (and invoke exit handlers)
- Tcl_ExposeCommand (3)
- manage multiple Tcl interpreters, aliases and hidden ...
- Tcl_Finalize (3)
- end the application or thread (and invoke exit handlers)
- Tcl_FinalizeNotifier (3)
- the event queue and notifier interfaces
- Tcl_FinalizeThread (3)
- end the application or thread (and invoke exit handl...
- Tcl_FindExecutable (3)
- identify or return the name of the binary file conta...
- Tcl_FindHashEntry (3)
- procedures to manage hash tables
- Tcl_FirstHashEntry (3)
- procedures to manage hash tables
- Tcl_Flush (3)
- buffered I/O facilities using channels
- Tcl_Free (3)
- allocate or free heap memory
- Tcl_FSAccess (3)
- procedures to interact with any filesystem
- Tcl_FSChdir (3)
- procedures to interact with any filesystem
- Tcl_FSConvertToPathType (3)
- procedures to interact with any filesystem
- Tcl_FSCopyDirectory (3)
- procedures to interact with any filesystem
- Tcl_FSCopyFile (3)
- procedures to interact with any filesystem
- Tcl_FSCreateDirectory (3)
- procedures to interact with any filesystem
- Tcl_FSData (3)
- procedures to interact with any filesystem
- Tcl_FSDeleteFile (3)
- procedures to interact with any filesystem
- Tcl_FSEqualPaths (3)
- procedures to interact with any filesystem
- Tcl_FSEvalFile (3)
- procedures to interact with any filesystem
- Tcl_FSEvalFileEx (3)
- procedures to interact with any filesystem
- Tcl_FSFileAttrsGet (3)
- procedures to interact with any filesystem
- Tcl_FSFileAttrsSet (3)
- procedures to interact with any filesystem
- Tcl_FSFileAttrStrings (3)
- procedures to interact with any filesystem
- Tcl_FSFileSystemInfo (3)
- procedures to interact with any filesystem
- Tcl_FSGetCwd (3)
- procedures to interact with any filesystem
- Tcl_FSGetFileSystemForPath (3)
- procedures to interact with any filesystem
- Tcl_FSGetInternalRep (3)
- procedures to interact with any filesystem
- Tcl_FSGetNativePath (3)
- procedures to interact with any filesystem
- Tcl_FSGetNormalizedPath (3)
- procedures to interact with any filesystem
- Tcl_FSGetPathType (3)
- procedures to interact with any filesystem
- Tcl_FSGetTranslatedPath (3)
- procedures to interact with any filesystem
- Tcl_FSGetTranslatedStringPath (3)
- procedures to interact with any filesystem
- Tcl_FSJoinPath (3)
- procedures to interact with any filesystem
- Tcl_FSJoinToPath (3)
- procedures to interact with any filesystem
- Tcl_FSLink (3)
- procedures to interact with any filesystem
- Tcl_FSListVolumes (3)
- procedures to interact with any filesystem
- Tcl_FSLoadFile (3)
- procedures to interact with any filesystem
- Tcl_FSLstat (3)
- procedures to interact with any filesystem
- Tcl_FSMatchInDirectory (3)
- procedures to interact with any filesystem
- Tcl_FSMountsChanged (3)
- procedures to interact with any filesystem
- Tcl_FSNewNativePath (3)
- procedures to interact with any filesystem
- Tcl_FSOpenFileChannel (3)
- procedures to interact with any filesystem
- Tcl_FSPathSeparator (3)
- procedures to interact with any filesystem
- Tcl_FSRegister (3)
- procedures to interact with any filesystem
- Tcl_FSRemoveDirectory (3)
- procedures to interact with any filesystem
- Tcl_FSRenameFile (3)
- procedures to interact with any filesystem
- Tcl_FSSplitPath (3)
- procedures to interact with any filesystem
- Tcl_FSStat (3)
- procedures to interact with any filesystem
- Tcl_FSUnloadFile (3)
- procedures to interact with any filesystem
- Tcl_FSUnregister (3)
- procedures to interact with any filesystem
- Tcl_FSUtime (3)
- procedures to interact with any filesystem
- Tcl_GetAccessTimeFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetAlias (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_GetAliasObj (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_GetBlocksFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetBlockSizeFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetChangeTimeFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetChannel (3)
- buffered I/O facilities using channels
- Tcl_GetChannelBufferSize (3)
- procedures for creating and manipulating channels
- Tcl_GetChannelError (3)
- functions to create/intercept Tcl errors by channel...
- Tcl_GetChannelErrorInterp (3)
- functions to create/intercept Tcl errors by c...
- Tcl_GetChannelHandle (3)
- procedures for creating and manipulating channels
- Tcl_GetChannelInstanceData (3)
- procedures for creating and manipulating cha...
- Tcl_GetChannelMode (3)
- procedures for creating and manipulating channels
- Tcl_GetChannelName (3)
- procedures for creating and manipulating channels
- Tcl_GetChannelNames (3)
- buffered I/O facilities using channels
- Tcl_GetChannelNamesEx (3)
- buffered I/O facilities using channels
- Tcl_GetChannelOption (3)
- buffered I/O facilities using channels
- Tcl_GetChannelThread (3)
- procedures for creating and manipulating channels
- Tcl_GetChannelType (3)
- procedures for creating and manipulating channels
- Tcl_GetCharLength (3)
- manipulate Tcl values as strings
- Tcl_GetCurrentThread (3)
- the event queue and notifier interfaces
- Tcl_GetCwd (3)
- manipulate the current working directory
- Tcl_GetDeviceTypeFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetEncodingSearchPath (3)
- procedures for creating and using encodings
- Tcl_GetEnsembleUnknownHandler (3)
- manipulate ensemble commands
- Tcl_GetErrorLine (3)
- retrieve or record information about errors and other ...
- Tcl_GetFSDeviceFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetFSInodeFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetGroupIdFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetHashKey (3)
- procedures to manage hash tables
- Tcl_GetHashValue (3)
- procedures to manage hash tables
- Tcl_GetHostName (3)
- get the name of the local host
- Tcl_GetInterpPath (3)
- manage multiple Tcl interpreters, aliases and hidden ...
- Tcl_GetLinkCountFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetMaster (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_GetMathFuncInfo (3)
- Define, query and enumerate math functions for expr...
- Tcl_GetModeFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetModificationTimeFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetNameOfExecutable (3)
- identify or return the name of the binary file ...
- Tcl_GetNamespaceUnknownHandler (3)
- manipulate namespaces
- Tcl_GetOpenFile (3)
- Return a FILE* for a channel registered in the given i...
- Tcl_GetPathType (3)
- manipulate platform-dependent file paths
- Tcl_GetRegExpFromObj (3)
- Pattern matching with regular expressions
- Tcl_Gets (3)
- buffered I/O facilities using channels
- Tcl_GetServiceMode (3)
- the event queue and notifier interfaces
- Tcl_GetSizeFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetSlave (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_GetsObj (3)
- buffered I/O facilities using channels
- Tcl_GetStackedChannel (3)
- manipulate stacked I/O channels
- Tcl_GetStdChannel (3)
- procedures for retrieving and replacing the standard ...
- Tcl_GetThreadData (3)
- Tcl thread support
- Tcl_GetTopChannel (3)
- manipulate stacked I/O channels
- Tcl_GetUniChar (3)
- manipulate Tcl values as strings
- Tcl_GetUserIdFromStat (3)
- procedures to interact with any filesystem
- Tcl_GetVersion (3)
- get the version of the library at runtime
- Tcl_HashStats (3)
- procedures to manage hash tables
- Tcl_HideCommand (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_InitCustomHashTable (3)
- procedures to manage hash tables
- Tcl_InitHashTable (3)
- procedures to manage hash tables
- Tcl_InitNotifier (3)
- the event queue and notifier interfaces
- Tcl_InitObjHashTable (3)
- procedures to manage hash tables
- Tcl_InitStubs (3)
- initialize the Tcl stubs mechanism
- Tcl_InputBlocked (3)
- buffered I/O facilities using channels
- Tcl_InputBuffered (3)
- buffered I/O facilities using channels
- Tcl_IsChannelExisting (3)
- procedures for creating and manipulating channels
- Tcl_IsChannelRegistered (3)
- procedures for creating and manipulating channels
- Tcl_IsChannelShared (3)
- procedures for creating and manipulating channels
- Tcl_IsSafe (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_IsShared (3)
- manipulate Tcl values
- Tcl_IsStandardChannel (3)
- buffered I/O facilities using channels
- Tcl_JoinPath (3)
- manipulate platform-dependent file paths
- Tcl_JoinThread (3)
- Tcl thread support
- Tcl_LimitAddHandler (3)
- manage and check resource limits on interpreters
- Tcl_LimitCheck (3)
- manage and check resource limits on interpreters
- Tcl_LimitExceeded (3)
- manage and check resource limits on interpreters
- Tcl_LimitGetCommands (3)
- manage and check resource limits on interpreters
- Tcl_LimitGetGranularity (3)
- manage and check resource limits on interpreters
- Tcl_LimitGetTime (3)
- manage and check resource limits on interpreters
- Tcl_LimitReady (3)
- manage and check resource limits on interpreters
- Tcl_LimitRemoveHandler (3)
- manage and check resource limits on interpreters
- Tcl_LimitSetCommands (3)
- manage and check resource limits on interpreters
- Tcl_LimitSetGranularity (3)
- manage and check resource limits on interpreters
- Tcl_LimitSetTime (3)
- manage and check resource limits on interpreters
- Tcl_LimitTypeEnabled (3)
- manage and check resource limits on interpreters
- Tcl_LimitTypeExceeded (3)
- manage and check resource limits on interpreters
- Tcl_LimitTypeReset (3)
- manage and check resource limits on interpreters
- Tcl_LimitTypeSet (3)
- manage and check resource limits on interpreters
- Tcl_ListMathFuncs (3)
- Define, query and enumerate math functions for expres...
- Tcl_ListObjLength (3)
- manipulate Tcl values as lists
- Tcl_LogCommandInfo (3)
- retrieve or record information about errors and othe...
- Tcl_MakeFileChannel (3)
- buffered I/O facilities using channels
- Tcl_MakeSafe (3)
- manage multiple Tcl interpreters, aliases and hidden c...
- Tcl_MakeTcpClientChannel (3)
- procedures to open channels using TCP sockets
- Tcl_MethodDeclarerClass (3)
- manipulate methods and method-call contexts
- Tcl_MethodDeclarerObject (3)
- manipulate methods and method-call contexts
- Tcl_MethodIsPublic (3)
- manipulate methods and method-call contexts
- Tcl_MethodIsType (3)
- manipulate methods and method-call contexts
- Tcl_MethodName (3)
- manipulate methods and method-call contexts
- Tcl_MutexFinalize (3)
- Tcl thread support
- Tcl_MutexLock (3)
- Tcl thread support
- Tcl_MutexUnlock (3)
- Tcl thread support
- Tcl_NewInstanceMethod (3)
- manipulate methods and method-call contexts
- Tcl_NewMethod (3)
- manipulate methods and method-call contexts
- Tcl_NextHashEntry (3)
- procedures to manage hash tables
- tcl_nonwordchars (n)
- Variables used by Tcl
- Tcl_NotifyChannel (3)
- procedures for creating and manipulating channels
- Tcl_NumUtfChars (3)
- routines for manipulating UTF-8 strings
- Tcl_ObjectContextInvokeNext (3)
- manipulate methods and method-call contexts
- Tcl_ObjectContextIsFiltering (3)
- manipulate methods and method-call contexts
- Tcl_ObjectContextMethod (3)
- manipulate methods and method-call contexts
- Tcl_ObjectContextObject (3)
- manipulate methods and method-call contexts
- Tcl_ObjectContextSkippedArgs (3)
- manipulate methods and method-call contexts
- Tcl_ObjectGetMethodNameMapper (3)
- manipulate objects and classes
- Tcl_ObjectSetMethodNameMapper (3)
- manipulate objects and classes
- Tcl_OpenCommandChannel (3)
- buffered I/O facilities using channels
- Tcl_OpenFileChannel (3)
- buffered I/O facilities using channels
- Tcl_OpenTcpClient (3)
- procedures to open channels using TCP sockets
- Tcl_OpenTcpServer (3)
- procedures to open channels using TCP sockets
- Tcl_OutputBuffered (3)
- buffered I/O facilities using channels
- tcl_patchLevel (n)
- Variables used by Tcl
- tcl_pkgPath (n)
- Variables used by Tcl
- Tcl_PosixError (3)
- retrieve or record information about errors and other ...
- Tcl_Preserve (3)
- avoid freeing storage while it is being used
- Tcl_PutEnv (3)
- procedures to manipulate the environment
- Tcl_QueueEvent (3)
- the event queue and notifier interfaces
- Tcl_Read (3)
- buffered I/O facilities using channels
- Tcl_ReadChars (3)
- buffered I/O facilities using channels
- Tcl_ReadRaw (3)
- buffered I/O facilities using channels
- Tcl_Realloc (3)
- allocate or free heap memory
- Tcl_ReapDetachedProcs (3)
- manage child processes in background
- Tcl_RecordAndEval (3)
- save command on history list before evaluating
- Tcl_RecordAndEvalObj (3)
- save command on history list before evaluating
- Tcl_RegExpCompile (3)
- Pattern matching with regular expressions
- Tcl_RegExpExec (3)
- Pattern matching with regular expressions
- Tcl_RegExpExecObj (3)
- Pattern matching with regular expressions
- Tcl_RegExpGetInfo (3)
- Pattern matching with regular expressions
- Tcl_RegExpMatch (3)
- Pattern matching with regular expressions
- Tcl_RegExpMatchObj (3)
- Pattern matching with regular expressions
- Tcl_RegExpRange (3)
- Pattern matching with regular expressions
- Tcl_RegisterChannel (3)
- buffered I/O facilities using channels
- Tcl_Release (3)
- avoid freeing storage while it is being used
- Tcl_Seek (3)
- buffered I/O facilities using channels
- Tcl_ServiceAll (3)
- the event queue and notifier interfaces
- Tcl_ServiceEvent (3)
- the event queue and notifier interfaces
- Tcl_ServiceModeHook (3)
- the event queue and notifier interfaces
- Tcl_SetByteArrayLength (3)
- manipulate Tcl values as a arrays of bytes
- Tcl_SetChannelBufferSize (3)
- procedures for creating and manipulating channels
- Tcl_SetChannelError (3)
- functions to create/intercept Tcl errors by channel...
- Tcl_SetChannelErrorInterp (3)
- functions to create/intercept Tcl errors by c...
- Tcl_SetChannelOption (3)
- buffered I/O facilities using channels
- Tcl_SetEncodingSearchPath (3)
- procedures for creating and using encodings
- Tcl_SetEnsembleUnknownHandler (3)
- manipulate ensemble commands
- Tcl_SetErrorCode (3)
- retrieve or record information about errors and other ...
- Tcl_SetErrorCodeVA (3)
- retrieve or record information about errors and othe...
- Tcl_SetErrorLine (3)
- retrieve or record information about errors and other ...
- Tcl_SetExitProc (3)
- end the application or thread (and invoke exit handlers)
- Tcl_SetHashValue (3)
- procedures to manage hash tables
- Tcl_SetMaxBlockTime (3)
- the event queue and notifier interfaces
- Tcl_SetNamespaceUnknownHandler (3)
- manipulate namespaces
- Tcl_SetNotifier (3)
- the event queue and notifier interfaces
- Tcl_SetObjErrorCode (3)
- retrieve or record information about errors and oth...
- Tcl_SetObjLength (3)
- manipulate Tcl values as strings
- Tcl_SetRecursionLimit (3)
- set maximum allowable nesting depth in interpreter
- Tcl_SetServiceMode (3)
- the event queue and notifier interfaces
- Tcl_SetStdChannel (3)
- procedures for retrieving and replacing the standard ...
- Tcl_SetTimer (3)
- the event queue and notifier interfaces
- Tcl_SourceRCFile (3)
- source the Tcl rc file
- Tcl_SpliceChannel (3)
- procedures for creating and manipulating channels
- Tcl_SplitPath (3)
- manipulate platform-dependent file paths
- Tcl_StackChannel (3)
- manipulate stacked I/O channels
- Tcl_StandardChannels (3)
- How the Tcl library deals with the standard channels
- Tcl_Stat (3)
- check file permissions and other attributes
- Tcl_StaticPackage (3)
- make a statically linked package available via the 'l...
- Tcl_StringCaseMatch (3)
- test whether a string matches a pattern
- Tcl_StringMatch (3)
- test whether a string matches a pattern
- Tcl_Tell (3)
- buffered I/O facilities using channels
- Tcl_ThreadAlert (3)
- the event queue and notifier interfaces
- Tcl_ThreadQueueEvent (3)
- the event queue and notifier interfaces
- Tcl_TruncateChannel (3)
- buffered I/O facilities using channels
- Tcl_Ungets (3)
- buffered I/O facilities using channels
- Tcl_UniChar (3)
- routines for manipulating UTF-8 strings
- Tcl_UniCharAtIndex (3)
- routines for manipulating UTF-8 strings
- Tcl_UniCharCaseMatch (3)
- routines for manipulating UTF-8 strings
- Tcl_UniCharIsAlnum (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsAlpha (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsControl (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsDigit (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsGraph (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsLower (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsPrint (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsPunct (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsSpace (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsUpper (3)
- routines for classification of Tcl_UniChar characters
- Tcl_UniCharIsWordChar (3)
- routines for classification of Tcl_UniChar charac...
- Tcl_UniCharLen (3)
- routines for manipulating UTF-8 strings
- Tcl_UniCharNcasecmp (3)
- routines for manipulating UTF-8 strings
- Tcl_UniCharNcmp (3)
- routines for manipulating UTF-8 strings
- Tcl_UniCharToLower (3)
- routines for manipulating the case of Unicode charac...
- Tcl_UniCharToTitle (3)
- routines for manipulating the case of Unicode charac...
- Tcl_UniCharToUpper (3)
- routines for manipulating the case of Unicode charac...
- Tcl_UniCharToUtf (3)
- routines for manipulating UTF-8 strings
- Tcl_UniCharToUtfDString (3)
- routines for manipulating UTF-8 strings
- Tcl_UnregisterChannel (3)
- buffered I/O facilities using channels
- Tcl_UnstackChannel (3)
- manipulate stacked I/O channels
- Tcl_UpVar (3)
- link one variable to another
- Tcl_UpVar2 (3)
- link one variable to another
- Tcl_UtfBackslash (3)
- routines for manipulating UTF-8 strings
- Tcl_UtfCharComplete (3)
- routines for manipulating UTF-8 strings
- Tcl_UtfToLower (3)
- routines for manipulating the case of Unicode characte...
- Tcl_UtfToTitle (3)
- routines for manipulating the case of Unicode characte...
- Tcl_UtfToUniChar (3)
- routines for manipulating UTF-8 strings
- Tcl_UtfToUniCharDString (3)
- routines for manipulating UTF-8 strings
- Tcl_UtfToUpper (3)
- routines for manipulating the case of Unicode characte...
- Tcl_WaitForEvent (3)
- the event queue and notifier interfaces
- Tcl_WaitPid (3)
- manage child processes in background
- Tcl_WinTCharToUtf (3)
- procedures for creating and using encodings
- Tcl_WinUtfToTChar (3)
- procedures for creating and using encodings
- tcl_wordchars (n)
- Variables used by Tcl
- Tcl_Write (3)
- buffered I/O facilities using channels
- Tcl_WriteChars (3)
- buffered I/O facilities using channels
- Tcl_WriteObj (3)
- buffered I/O facilities using channels
- Tcl_WriteRaw (3)
- buffered I/O facilities using channels
- Tcl_ZlibStreamChecksum (3)
- compression and decompression functions
- tclsh (1)
- Simple shell containing Tcl interpreter
- tcltest (n)
- Test harness support code and utilities
- tcpdchk (8)
- tcp wrapper configuration checker
- tcpdmatch (8)
- tcp wrapper oracle
- tcpser (1)
- emulate a Hayes compatible modem
- tcsetattr (3p)
- set the parameters associated with the terminal
- tcsetpgrp (3p)
- set the foreground process group ID
- tcsh (1)
- C shell with file name completion and command line edi...
- tdb (3)
- The tdb API
- tdbbackup (8)
- tool for backing up and for validating the integrity o...
- tdbc_sqlite3 (n)
- TDBC driver for the SQLite3 database manager
- tdbdump (8)
- tool for printing the contents of a TDB file
- tdbtool (8)
- manipulate the contents TDB files
- tdelete (3p)
- manage a binary search tree
- teachgammon (6)
- learn to play backgammon
- tek2plot (1)
- translate Tektronix files to other graphics formats
- telepathy-gabble (8)
- Telepathy connection manager for XMPP (Jabber)
- telepathy-haze (8)
- Telepathy connection manager using libpurple
- telepathy-idle (8)
- Telepathy connection manager for IRC
- telepathy-salut (8)
- Telepathy connection manager for link-local XMPP
- telinit (8)
- Change SysV runlevel
- tell (n)
- Return current access position for an open channel
- tepam_introduction (n)
- An introduction into TEPAM, Tcl's Enhanced Procedure...
- Term::ReadLine::Gnu (3pm)
- Perl extension for the GNU Readline/History Library
- term_bind (n)
- Keyboard dispatch from terminals
- termcap (3ncurses)
- direct curses interface to the terminfo capability dat...
- termios.h (0p)
- define values for termios
- test (1)
- check file types and compare values
- Test::Alien::Diag (3)
- Print out standard diagnostic for Aliens in the test ...
- Test::Alien::Synthetic (3)
- A mock alien object for testing
- Test::Compile (3)
- Assert that your Perl files compile OK.
- Test::Compile::Internal (3)
- Assert that your Perl files compile OK.
- Test::LongString (3pm)
- tests strings for equality, with more helpful failures
- Test::Pod::Coverage (3)
- Check for pod coverage in your distribution.
- Test::utf8 (3pm)
- handy utf8 tests
- test_and_change_bit (9)
- Change a bit and return its old value
- test_bit (9)
- Determine whether a bit is set
- testparm (1)
- check an smb.conf configuration file for internal corr...
- testsaslauthd (8)
- a test tool for saslauthd
- testsolv (1)
- run a libsolv testcase through the solver
- tetris-bsd (6)
- the game of tetris
- tevent_context (3)
- Chapter 1: Tevent context
- tevent_data (3)
- Chapter 3: Accessing data
- tevent_events (3)
- Chapter 2: Tevent events
- tevent_helpers (3)
- (unknown subject)
- tevent_queue_tutorial (3)
- The tevent_queue tutorial
- tevent_tutorial (3)
- The Tutorial
- texhash (1)
- create ls-R databases
- texi2html (1)
- a Texinfo to HTML converter
- text (n)
- Create and manipulate 'text' hypertext editing widgets
- text2pcap (1)
- Generate a capture file from an ASCII hexdump of packets
- Text::Levenshtein (3)
- calculate the Levenshtein edit distance between two s...
- Text::Soundex (3)
- Implementation of the soundex algorithm.
- Text::Wrap (3)
- line wrapping to form simple paragraphs
- tfind (3p)
- search binary search tree
- tfmtodit (1)
- create font files for use with groff - Tdvi
- tgetent (3ncurses)
- direct curses interface to the terminfo capability dat...
- tgetflag (3ncurses)
- direct curses interface to the terminfo capability dat...
- tgetnum (3ncurses)
- direct curses interface to the terminfo capability dat...
- tgetstr (3ncurses)
- direct curses interface to the terminfo capability dat...
- tgkill (2)
- send a signal to a thread
- tgmath.h (0p)
- type-generic macros
- tgoto (3ncurses)
- direct curses interface to the terminfo capability dat...
- thaw_bdev (9)
- - unlock filesystem
- thaw_super (9)
- - unlock filesystem
- thin_check (8)
- repair thin provisioning metadata on device or file
- thin_dump (8)
- dump thin provisioning metadata from device or file to...
- thin_metadata_size (8)
- thin provisioning metadata device/file size calculator.
- thin_repair (8)
- repair thin provisioning binary metadata from device/f...
- thin_restore (8)
- restore thin provisioning metadata file to device or file
- thin_rmap (8)
- output reverse map of a thin provisioned region of blo...
- thinkjettopbm (1)
- convert HP ThinkJet printer commands file to PBM
- thornbird (6x)
- Bird in a Thornbush fractal.
- thread (n)
- Extension for script access to Tcl threading
- thread-keyring (7)
- (unknown subject)
- Thread::Queue (3)
- Thread-safe queues
- Thread::Semaphore (3)
- Thread-safe semaphores
- threadgroup_lock (9)
- lock threadgroup
- threadgroup_unlock (9)
- unlock threadgroup
- threads (3)
- Perl interpreter-based threads
- threads (3ncurses)
- curses thread support
- threads::shared (3)
- Perl extension for sharing data structures between thr...
- throw (n)
- Generate a machine-readable error
- thumbpdf (1)
- generate thumbnail images for a PDF file created with ...
- thunar (1)
- File Manager for the Xfce Desktop Environment
- tic (1)
- the terminfo entry-description compiler
- tid_show (9)
- Displays TID of I2O device
- tie (1)
- merge or apply WEB change files
- Tie::Hash (3)
- base class definitions for tied hashes
- Tie::File (3)
- Access the lines of a disk file via a Perl array
- Tie::Handle (3)
- base class definitions for tied handles
- Tie::Hash::NamedCapture (3)
- Named regexp capture buffers
- Tie::IxHash (3pm)
- ordered associative arrays for Perl
- Tie::Memoize (3)
- add data to hash when needed
- Tie::RefHash (3)
- Use references as hash keys
- Tie::StdHandle (3)
- base class definitions for tied handles
- Tie::SubstrHash (3)
- Fixed-table-size, fixed-key-length hashing
- TIFFWriteDirectory (3tiff)
- write the current directory in an open TIFF file
- TIFFDataWidth (3tiff)
- Get the size of TIFF data types
- TIFFError (3tiff)
- library error handling interface
- TIFFFieldPassCount (3tiff)
- Get whether to pass a count to TIFFGet/SetField
- TIFFFlush (3tiff)
- flush pending writes to an open TIFF file
- TIFFGetField (3tiff)
- get the value(s) of a tag in an open TIFF file
- TIFFsize (3tiff)
- return the size of various items associated with an op...
- TIFFReadDirectory (3tiff)
- get the contents of the next directory in an open...
- TIFFReadRawStrip (3tiff)
- return the undecoded contents of a strip of data f...
- TIFFSetDirectory (3tiff)
- set the current directory for an open TIFF file
- TIFFSetField (3tiff)
- set the value(s) of a tag in a TIFF file open for writing
- tiger-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- time (n)
- Time the execution of a script
- time.conf (5)
- configuration file for the pam_time module
- time.h (0p)
- time types
- Time::Duration (3pm)
- rounded or exact English expression of durations
- Time::Seconds (3)
- a simple API to convert seconds to other date values
- timedatectl (1)
- Control the system time and date
- timeout (1)
- run a command with a time limit
- timer_gettime (2)
- arm/disarm and fetch state of POSIX per-process timer
- timer_settime (2)
- arm/disarm and fetch state of POSIX per-process timer
- timerfd_create (2)
- timers that notify via file descriptors
- timerfd_gettime (2)
- timers that notify via file descriptors
- timerfd_settime (2)
- timers that notify via file descriptors
- times (3p)
- get process and waited-for child process times
- tinyleaf (8)
- Very simple IHAVE-only NNTP server
- tis-620 (7)
- ISO 8859-11 character set encoded in octal, decimal, a...
- tix (n)
- Manipulate internal states of the Tix library
- tixCheckList (n)
- Create and manipulate tixCheckList widgets
- tixForm (n)
- Geometry manager based on attachment rules
- tixGetBoolean (n)
- Get the boolean value of a string.
- tixGetInt (n)
- Get the integer value of a string.
- tixHList (n)
- Create and manipulate Tix Hierarchial List widgets
- TixIntro (n)
- Introduction to the Tix library
- tixMwm (n)
- Communicate with the Motif(tm) window manager.
- tixScrolledHList (n)
- Create and manipulate Tix ScrolledHList widgets
- Tk_3DBorderColor (3)
- draw borders with three-dimensional appearance
- Tk_3DBorderGC (3)
- draw borders with three-dimensional appearance
- Tk_3DHorizontalBevel (3)
- draw borders with three-dimensional appearance
- Tk_3DVerticalBevel (3)
- draw borders with three-dimensional appearance
- Tk_AddOption (3)
- Add an option to the option database
- Tk_Alloc3DBorderFromObj (3)
- draw borders with three-dimensional appearance
- Tk_AttachHWND (3)
- manage interactions between the Windows handle and an ...
- tk_bisque (n)
- Modify the Tk color palette
- Tk_CanvasPsPath (3)
- utility procedures for generating Postscript for canvases
- Tk_Changes (3)
- retrieve information from Tk's local data structure
- Tk_ChangeWindowAttributes (3)
- change window configuration or attributes
- Tk_CharBbox (3)
- routines to measure and display single-font, multi-lin...
- tk_chooseColor (n)
- pops up a dialog box for the user to select a color.
- tk_chooseDirectory (n)
- pops up a dialog box for the user to select a direct...
- Tk_ClipboardAppend (3)
- Manage the clipboard
- Tk_ClipboardClear (3)
- Manage the clipboard
- Tk_CollapseMotionEvents (3)
- Add a window event to the Tcl event queue
- Tk_ConfigureWindow (3)
- change window configuration or attributes
- Tk_CreateClientMessageHandler (3)
- associate procedure callback with ClientM...
- Tk_CreateErrorHandler (3)
- handle X protocol errors
- Tk_CreateEventHandler (3)
- associate procedure callback with an X event
- Tk_CreateGenericHandler (3)
- associate procedure callback with all X events
- Tk_CreatePhotoImageFormat (3)
- define new file format for photo images
- Tk_CreateSelHandler (3)
- arrange to handle requests for a selection
- Tk_CreateWindowFromPath (3)
- create or delete window
- Tk_DefineCursor (3)
- change window configuration or attributes
- Tk_DeleteClientMessageHandler (3)
- associate procedure callback with ClientM...
- Tk_DeleteErrorHandler (3)
- handle X protocol errors
- Tk_DeleteEventHandler (3)
- associate procedure callback with an X event
- Tk_DeleteGenericHandler (3)
- associate procedure callback with all X events
- Tk_DeleteSelHandler (3)
- arrange to handle requests for a selection
- Tk_Depth (3)
- retrieve information from Tk's local data structure
- Tk_Draw3DPolygon (3)
- draw borders with three-dimensional appearance
- Tk_Draw3DRectangle (3)
- draw borders with three-dimensional appearance
- Tk_DrawChars (3)
- routines to measure and display simple single-line str...
- Tk_DrawFocusHighlight (3)
- draw the traversal highlight ring for a widget
- Tk_Fill3DPolygon (3)
- draw borders with three-dimensional appearance
- Tk_Fill3DRectangle (3)
- draw borders with three-dimensional appearance
- Tk_FindPhoto (3)
- manipulate the image data stored in a photo image.
- tk_focusFollowsMouse (n)
- Utility procedures for managing the input focus.
- tk_focusNext (n)
- Utility procedures for managing the input focus.
- tk_focusPrev (n)
- Utility procedures for managing the input focus.
- Tk_Free3DBorder (3)
- draw borders with three-dimensional appearance
- Tk_Free3DBorderFromObj (3)
- draw borders with three-dimensional appearance
- Tk_FreeGC (3)
- maintain database of read-only graphics contexts
- Tk_Get3DBorder (3)
- draw borders with three-dimensional appearance
- Tk_Get3DBorderFromObj (3)
- draw borders with three-dimensional appearance
- Tk_GetAnchor (3)
- translate between strings and anchor positions
- Tk_GetAnchorFromObj (3)
- translate between strings and anchor positions
- Tk_GetAtomName (3)
- manage cache of X atoms
- Tk_GetDash (3)
- convert from string to valid dash structure.
- Tk_GetGC (3)
- maintain database of read-only graphics contexts
- Tk_GetHINSTANCE (3)
- retrieve the global application instance handle
- Tk_GetHWND (3)
- manage interactions between the Windows handle and an ...
- tk_getOpenFile (n)
- pop up a dialog box for the user to select a file to o...
- Tk_GetOption (3)
- retrieve an option from the option database
- tk_getSaveFile (n)
- pop up a dialog box for the user to select a file to o...
- Tk_GetSelection (3)
- retrieve the contents of a selection
- Tk_HandleEvent (3)
- invoke event handlers for window system events
- Tk_Height (3)
- retrieve information from Tk's local data structure
- Tk_HWNDToWindow (3)
- Find Tk's window information for a Windows window
- Tk_ImageChanged (3)
- notify widgets that image needs to be redrawn
- Tk_InitConsoleChannels (3)
- Install the console channels as standard channels
- Tk_InitStubs (3)
- initialize the Tk stubs mechanism
- Tk_InternalBorderRight (3)
- retrieve information from Tk's local data structure
- Tk_InternAtom (3)
- manage cache of X atoms
- Tk_MaintainGeometry (3)
- maintain geometry of one window relative to another
- Tk_ManageGeometry (3)
- arrange to handle geometry requests for a window
- Tk_MeasureChars (3)
- routines to measure and display simple single-line str...
- Tk_MinReqHeight (3)
- retrieve information from Tk's local data structure
- Tk_MinReqWidth (3)
- retrieve information from Tk's local data structure
- Tk_MoveResizeWindow (3)
- change window configuration or attributes
- Tk_MoveToplevelWindow (3)
- Adjust the position of a top-level window
- Tk_MoveWindow (3)
- change window configuration or attributes
- Tk_NameOf3DBorder (3)
- draw borders with three-dimensional appearance
- Tk_NameOfAnchor (3)
- translate between strings and anchor positions
- Tk_OwnSelection (3)
- make a window the owner of the primary selection
- tk_patchLevel (n)
- Variables used or set by Tk
- Tk_PathName (3)
- convert between names and window tokens
- Tk_PhotoBlank (3)
- manipulate the image data stored in a photo image.
- Tk_PhotoExpand (3)
- manipulate the image data stored in a photo image.
- Tk_PhotoGetImage (3)
- manipulate the image data stored in a photo image.
- Tk_PhotoGetSize (3)
- manipulate the image data stored in a photo image.
- Tk_PhotoPutBlock (3)
- manipulate the image data stored in a photo image.
- Tk_PhotoPutZoomedBlock (3)
- manipulate the image data stored in a photo image.
- Tk_PhotoSetSize (3)
- manipulate the image data stored in a photo image.
- Tk_PointToChar (3)
- routines to measure and display single-font, multi-lin...
- Tk_QueueWindowEvent (3)
- Add a window event to the Tcl event queue
- Tk_ReqHeight (3)
- retrieve information from Tk's local data structure
- Tk_ReqWidth (3)
- retrieve information from Tk's local data structure
- Tk_ResizeWindow (3)
- change window configuration or attributes
- Tk_RestackWindow (3)
- Change a window's position in the stacking order
- Tk_SetAppName (3)
- Set the name of an application for 'send' commands
- Tk_SetBackgroundFromBorder (3)
- draw borders with three-dimensional appearance
- Tk_SetCaretPos (3)
- set the display caret location
- Tk_SetGrid (3)
- control the grid for interactive resizing
- tk_setPalette (n)
- Modify the Tk color palette
- Tk_SetWindowBackground (3)
- change window configuration or attributes
- Tk_SetWindowBackgroundPixmap (3)
- change window configuration or attributes
- Tk_SetWindowBorder (3)
- change window configuration or attributes
- Tk_SetWindowBorderPixmap (3)
- change window configuration or attributes
- Tk_SetWindowBorderWidth (3)
- change window configuration or attributes
- Tk_SetWindowColormap (3)
- change window configuration or attributes
- Tk_SetWindowVisual (3)
- change visual characteristics of window
- tk_textCopy (n)
- Create and manipulate 'text' hypertext editing widgets
- tk_textCut (n)
- Create and manipulate 'text' hypertext editing widgets
- tk_textPaste (n)
- Create and manipulate 'text' hypertext editing widgets
- Tk_TextWidth (3)
- routines to measure and display simple single-line str...
- Tk_UndefineCursor (3)
- change window configuration or attributes
- Tk_UnderlineChars (3)
- routines to measure and display simple single-line st...
- Tk_UnmaintainGeometry (3)
- maintain geometry of one window relative to another
- Tk_UnsetGrid (3)
- control the grid for interactive resizing
- Tk_Width (3)
- retrieve information from Tk's local data structure
- tkill (2)
- send a signal to a thread
- tkmib (1)
- an interactive graphical MIB browser for SNMP
- tknewsbiff (1)
- pop up a window when news appears
- tkpppoe (1)
- Graphical interface for controlling rp-pppoe
- tkwait (n)
- Wait for variable to change or window to be destroyed
- tld_check_4 (3)
- API function
- tld_check_4t (3)
- API function
- tld_check_4tz (3)
- API function
- tld_check_4z (3)
- API function
- tld_check_8z (3)
- API function
- tld_check_lz (3)
- API function
- tload (1)
- graphic representation of system load average
- TLS_client_method (3osslssl-3)
- create a new SSL_CTX object as framework for...
- TLS_method (3osslssl-3)
- create a new SSL_CTX object as framework for TLS/SS...
- TLS_server_method (3osslssl-3)
- create a new SSL_CTX object as framework for...
- tlsmgr (8)
- Postfix TLS session cache and PRNG manager
- TLSv1_1_client_method (3osslssl-3)
- create a new SSL_CTX object as framework...
- TLSv1_1_method (3osslssl-3)
- create a new SSL_CTX object as framework for TL...
- TLSv1_1_server_method (3osslssl-3)
- create a new SSL_CTX object as framework...
- TLSv1_2_client_method (3osslssl-3)
- create a new SSL_CTX object as framework...
- TLSv1_2_method (3osslssl-3)
- create a new SSL_CTX object as framework for TL...
- TLSv1_2_server_method (3osslssl-3)
- create a new SSL_CTX object as framework...
- TLSv1_client_method (3osslssl-3)
- create a new SSL_CTX object as framework f...
- TLSv1_method (3osslssl-3)
- create a new SSL_CTX object as framework for TLS/...
- TLSv1_server_method (3osslssl-3)
- create a new SSL_CTX object as framework f...
- tnc (n)
- tnc is an expat parser object extension, that validate...
- toascii (3)
- convert character to ASCII
- toascii (3p)
- translate an integer to a 7-bit ASCII character
- togglesebool (8)
- flip the current value of a SELinux boolean
- tolocal (1)
- Character set conversion filter
- tolower (3p)
- transliterate uppercase characters to lowercase
- topblock (6x)
- a 3D world of falling blocks that build up and up.
- totem-video-thumbnailer (1)
- video thumbnailer for the GNOME desktop
- touch (1)
- change file timestamps
- touch (1p)
- change file access and modification times
- touch (3ncurses)
- curses refresh control routines
- touch_atime (9)
- update the access time
- touchline (3ncurses)
- curses refresh control routines
- touchwin (3ncurses)
- curses refresh control routines
- toupper (3p)
- transliterate lowercase characters to uppercase
- towctrans (3)
- wide-character transliteration
- towctrans (3p)
- wide-character transliteration
- towlower (3)
- convert a wide character to lowercase
- towlower (3p)
- transliterate uppercase wide-character code to lowercase
- towlower_l (3)
- convert a wide character to lowercase
- towupper (3)
- convert a wide character to uppercase
- towupper (3p)
- transliterate lowercase wide-character code to uppercase
- towupper_l (3)
- convert a wide character to uppercase
- tpool (n)
- Part of the Tcl threading extension implementing pools...
- tput (1p)
- change terminal characteristics
- tr (1)
- translate or delete characters
- tr (1p)
- translate characters
- trace.h (0p)
- tracing
- trace_block_bio_backmerge (9)
- merging block operation to the end of an exis...
- trace_block_bio_bounce (9)
- used bounce buffer when processing block operation
- trace_block_bio_complete (9)
- completed all work on the block operation
- trace_block_bio_frontmerge (9)
- merging block operation to the beginning of ...
- trace_block_bio_remap (9)
- map request for a logical device to the raw device
- trace_block_touch_buffer (9)
- mark a buffer accessed
- trace_irq_handler_entry (9)
- called immediately before the irq action handler
- trace_irq_handler_exit (9)
- called immediately after the irq action handler ...
- trace_printk (9)
- printf formatting in the ftrace buffer
- trace_puts (9)
- write a string into the ftrace buffer
- trace_signal_deliver (9)
- called when a signal is delivered
- trace_signal_generate (9)
- called when a signal is generated
- trace_softirq_entry (9)
- called immediately before the softirq handler
- trace_softirq_exit (9)
- called immediately after the softirq handler returns
- trace_softirq_raise (9)
- called immediately when a softirq is raised
- trace_workqueue_activate_work (9)
- called when a work gets activated
- trace_workqueue_execute_end (9)
- called immediately after the workqueue call...
- trace_workqueue_execute_start (9)
- called immediately before the workqueue c...
- trace_workqueue_queue_work (9)
- called when a work gets queued
- tracepath (8)
- traces path to a network host discovering MTU along th...
- tracepath6 (8)
- traces path to a network host discovering MTU along th...
- traceroute (8)
- print the route packets trace to network host
- traceroute6 (8)
- print the route packets trace to network host
- tracker-import (1)
- Imports Turtle file data into the database
- tracker-miner-fs (1)
- Used to crawl the file system to mine data.
- tracker-needle (1)
- GNOME user interface similar to tracker-search
- tracker-search (1)
- Search all content for keywords
- tracker-sparql (1)
- Use SparQL to query the Tracker databases.
- tracker-stats (1)
- Provides statistics on the data available for querying
- tracker-writeback (1)
- Used to write metadata set in Tracker back to physica...
- traffic_learner (7)
- Samba tool to assist with traffic generation.
- trang (1)
- Schema Converter Based on RELAX NG
- transchan (n)
- command handler API of channel transforms
- transport_remove_device (9)
- remove the visibility of a device
- traptoemail (1)
- snmptrapd handler script to convert snmp traps into em...
- tred (1)
- transitive reduction filter for directed graphs
- troff (1)
- the troff processor of the groff text formatting system
- truchet (6x)
- draws curved or angular Truchet patterns
- true (1)
- do nothing, successfully
- truncate (1)
- shrink or extend the size of a file to the specified size
- truncate (2)
- truncate a file to a specified length
- truncate (3p)
- truncate a file to a specified length
- truncate64 (2)
- truncate a file to a specified length
- truncate_inode_pages (9)
- truncate *all* the pages from an offset
- truncate_pagecache (9)
- unmap and remove pagecache that has been truncated
- truncate_pagecache_range (9)
- unmap and remove pagecache that is hole-punched
- truncate_setsize (9)
- update inode and pagecache for a new file size
- trust (1)
- Tool for operating on the trust policy store
- tryaffix (1)
- Interactive spelling checking
- tsearch (3)
- manage a binary tree
- tsearch (3p)
- search a binary search tree
- tsget (1osslssl-3)
- Time Stamping HTTP/HTTPS client
- tshark (1)
- Dump and analyze network traffic
- tst (3)
- ternary search trie functions
- tsv (n)
- Part of the Tcl threading extension allowing script le...
- ttfdump (1)
- Dumping the contents of a TrueType Font file
- tth-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- ttk_button (n)
- Widget that issues a command when pressed
- ttk_checkbutton (n)
- On/off widget
- ttk_combobox (n)
- text field with popdown selection list
- ttk_intro (n)
- Introduction to the Tk theme engine
- ttk_labelframe (n)
- Container widget with optional label
- ttk_menubutton (n)
- Widget that pops down a menu when pressed
- ttk_scrollbar (n)
- Control the viewport of a scrollable widget
- ttk_sizegrip (n)
- Bottom-right corner resize widget
- ttk_treeview (n)
- hierarchical multicolumn data display widget
- ttk_widget (n)
- Standard options and commands supported by Tk themed w...
- Ttk_AddPadding (3)
- Tk themed geometry utilities
- Ttk_BoxContains (3)
- Tk themed geometry utilities
- Ttk_CreateTheme (3)
- create and use Tk themes.
- Ttk_ExpandBox (3)
- Tk themed geometry utilities
- Ttk_GetBorderFromObj (3)
- Tk themed geometry utilities
- Ttk_GetCurrentTheme (3)
- create and use Tk themes.
- Ttk_GetDefaultTheme (3)
- create and use Tk themes.
- Ttk_GetPaddingFromObj (3)
- Tk themed geometry utilities
- Ttk_GetStickyFromObj (3)
- Tk themed geometry utilities
- Ttk_GetTheme (3)
- create and use Tk themes.
- Ttk_MakeBox (3)
- Tk themed geometry utilities
- Ttk_MakePadding (3)
- Tk themed geometry utilities
- Ttk_PackBox (3)
- Tk themed geometry utilities
- Ttk_PadBox (3)
- Tk themed geometry utilities
- Ttk_PlaceBox (3)
- Tk themed geometry utilities
- Ttk_RelievePadding (3)
- Tk themed geometry utilities
- Ttk_StickBox (3)
- Tk themed geometry utilities
- Ttk_UniformPadding (3)
- Tk themed geometry utilities
- tty (1)
- print the file name of the terminal connected to stand...
- ttyname (3p)
- find the pathname of a terminal
- ttyslot (3)
- find the slot of the current user's terminal in some file
- tunelp (8)
- set various parameters for the lp device
- twalk (3p)
- traverse a binary search tree
- twang (6x)
- pluck pieces of the screen
- twm (1)
- Tab Window Manager for the X Window System
- twopi (1)
- filter for radial layouts of graphs
- TYPE_ALPHA (3form)
- form system global variables
- typeahead (3ncurses)
- curses input options
- typeahead_sp (3ncurses)
- curses screen-pointer extension
- typedef_handle_t (9)
- The handle_t type represents a single atomic update be...
- typedef_journal_t (9)
- The journal_t maintains all of the journaling state i...
- types.h (3)
- Common types used in decoder and encoder API.
- ualarm (3)
- schedule signal after given number of microseconds
- uart_add_one_port (9)
- attach a driver-defined port structure
- uart_handle_cts_change (9)
- handle a change of clear-to-send state
- uart_handle_dcd_change (9)
- handle a change of carrier detect state
- uart_insert_char (9)
- push a char to the uart layer
- uart_register_driver (9)
- register a driver with the uart core layer
- uart_remove_one_port (9)
- detach a driver defined port structure
- uart_set_options (9)
- setup the serial console parameters
- uart_unregister_driver (9)
- remove a driver from the uart core layer
- uconv (1)
- convert data from one encoding to another
- udhcpc (8)
- very small DHCP client
- udhcpd (8)
- very small DHCP server
- udhcpd.conf (5)
- udhcp server configuration file
- udisksctl (1)
- The udisks command line tool
- udisksd (8)
- The udisks system daemon
- udplite (7)
- Lightweight User Datagram Protocol
- UI_create_method (3osslssl-3)
- user interface method creation and destruction
- UI_destroy_method (3osslssl-3)
- user interface method creation and destruction
- UI_get_default_method (3osslssl-3)
- user interface
- UI_get_method (3osslssl-3)
- user interface
- UI_get_result_length (3osslssl-3)
- user interface
- UI_get_result_string_length (3osslssl-3)
- User interface string parsing
- UI_METHOD (3osslssl-3)
- user interface method creation and destruction
- UI_method_get_closer (3osslssl-3)
- user interface method creation and destru...
- UI_method_get_data_destructor (3osslssl-3)
- user interface method creation a...
- UI_method_get_data_duplicator (3osslssl-3)
- user interface method creation a...
- UI_method_get_ex_data (3osslssl-3)
- user interface method creation and destr...
- UI_method_get_flusher (3osslssl-3)
- user interface method creation and destr...
- UI_method_get_opener (3osslssl-3)
- user interface method creation and destru...
- UI_method_get_prompt_constructor (3osslssl-3)
- user interface method creatio...
- UI_method_get_reader (3osslssl-3)
- user interface method creation and destru...
- UI_method_get_writer (3osslssl-3)
- user interface method creation and destru...
- UI_method_set_closer (3osslssl-3)
- user interface method creation and destru...
- UI_method_set_data_duplicator (3osslssl-3)
- user interface method creation a...
- UI_method_set_ex_data (3osslssl-3)
- user interface method creation and destr...
- UI_method_set_flusher (3osslssl-3)
- user interface method creation and destr...
- UI_method_set_opener (3osslssl-3)
- user interface method creation and destru...
- UI_method_set_prompt_constructor (3osslssl-3)
- user interface method creatio...
- UI_method_set_reader (3osslssl-3)
- user interface method creation and destru...
- UI_method_set_writer (3osslssl-3)
- user interface method creation and destru...
- UI_new_method (3osslssl-3)
- user interface
- UI_set_default_method (3osslssl-3)
- user interface
- UI_set_method (3osslssl-3)
- user interface
- ulckpwdf (3)
- get shadow password file entry
- ulimit.h (0p)
- ulimit commands
- umask (1p)
- get or set the file mode creation mask
- umask (3p)
- set and get the file mode creation mask
- uname (3p)
- get the name of the current system
- uname26 (8)
- change reported architecture in new program environmen...
- unflatten (1)
- adjust directed graphs to improve layout aspect ratio
- unget_wch (3ncurses)
- get (or push back) a wide character from curses termin...
- unget_wch_sp (3ncurses)
- curses screen-pointer extension
- ungetc (3)
- input of characters and strings
- ungetc (3p)
- push byte back into input stream
- ungetch (3ncurses)
- get (or push back) characters from curses terminal key...
- ungetch_sp (3ncurses)
- curses screen-pointer extension
- ungetmouse (3ncurses)
- mouse interface through curses
- ungetwc (3)
- push back a wide character onto a FILE stream
- ungetwc (3p)
- push wide-character code back into the input stream
- urxvt-256color (1)
- (a VT102 emulator for the X window system)
- Unicode::Collate (3)
- Unicode Collation Algorithm
- Unicode::Collate::CJK::Big5 (3)
- weighting CJK Unified Ideographs for Unicod...
- Unicode::Collate::CJK::GB2312 (3)
- weighting CJK Unified Ideographs for Unic...
- Unicode::Collate::CJK::JISX0208 (3)
- weighting JIS KANJI for Unicode::Collate
- Unicode::Collate::CJK::Korean (3)
- weighting CJK Unified Ideographs for Unic...
- Unicode::Collate::CJK::Pinyin (3)
- weighting CJK Unified Ideographs for Unic...
- Unicode::Collate::CJK::Stroke (3)
- weighting CJK Unified Ideographs for Unic...
- Unicode::Collate::CJK::Zhuyin (3)
- weighting CJK Unified Ideographs for Unic...
- Unicode::UCD (3)
- Unicode character database
- uniconv (1)
- convert text to native formats through unicode
- union_hdmi_infoframe (9)
- overall union of all abstract infoframe representa...
- unistd.h (0p)
- standard symbolic constants and types
- unix2_chkpwd (8)
- helper binary that verifies the password of the curren...
- Unix::Syslog (3pm)
- Perl interface to the UNIX syslog(3) calls
- unix_chkpwd (8)
- Helper binary that verifies the password of the curren...
- unix_update (8)
- Helper binary that updates the password of a given user
- unknown (n)
- Handle attempts to use non-existent commands
- unknownpleasures (6x)
- an animation of the signal from the pulsar PSR B1919+21.
- unlink (1)
- call the unlink function to remove the specified file
- unlink (1p)
- call theunlink() function
- unlink (2)
- delete a name and possibly the file it refers to
- unlinkat (2)
- delete a name and possibly the file it refers to
- unload (n)
- Unload machine code
- unlock_new_inode (9)
- clear the I_NEW state and wake up any waiters
- unmap_kernel_range (9)
- unmap kernel VM area and flush cache and TLB
- unmap_kernel_range_noflush (9)
- unmap kernel VM area
- unmap_mapping_range (9)
- unmap the portion of all mmaps in the specified add...
- unqueue_me (9)
- Remove the futex_q from its futex_hash_bucket
- unrar (1)
- extract, test, and view RAR archives
- unregister_adapter_interrupt (9)
- unregister adapter interrupt handler
- unregister_all_config_handlers (3)
- netsnmp_config_api functions
- unregister_app_config_handler (3)
- netsnmp_config_api functions
- unregister_chrdev_region (9)
- return a range of device numbers
- unregister_config_handler (3)
- netsnmp_config_api functions
- unregister_netdev (9)
- remove device from the kernel
- unregister_netdevice_queue (9)
- remove device from the kernel
- unrpm (1)
- unpack the contents of one or more rpm files
- unsetenv (3)
- change or add an environment variable
- unshar (1)
- unpack a shar file
- unshare (1)
- run program with some namespaces unshared from parent
- unshare (2)
- disassociate parts of the process execution context
- untouchwin (3ncurses)
- curses refresh control routines
- unvis (3bsd)
- decode a visual representation of characters
- unw_backtrace (3)
- - return backtrace for the calling program
- unw_flush_cache (3)
- - flush cached info
- unw_getcontext (3)
- - get initial machine-state
- unw_is_fpreg (3)
- - check if a register is a floating-point register
- unw_is_signal_frame (3)
- - check if current frame is a signal frame
- unw_set_caching_policy (3)
- - set unwind caching policy
- unwrapdiff (1)
- demangle word-wrapped patches
- unzip (1)
- list, test and extract compressed files in a ZIP archive
- unzipsfx (1)
- self-extracting stub for prepending to ZIP archives
- UP (3ncurses)
- direct curses interface to the terminfo capability dat...
- update-bootloader (8)
- update/change bootloader configuration using Bootload...
- update-desktop-database (1)
- Build cache database of MIME types handled by d...
- update-mime-database (1)
- a program to build the Shared MIME-Info database c...
- update-pciids (8)
- download new version of the PCI ID list
- update_sd_lb_stats (9)
- Update sched_domain's statistics for load balancing.
- update_sg_lb_stats (9)
- Update sched_group's statistics for load balancing.
- updwtmp (3)
- append an entry to the wtmp file
- updwtmpx (3)
- append an entry to the wtmp file
- uptime (1)
- tell how long the system has been running
- URI::icap (3)
- URI scheme for ICAP Identifiers
- URI::icaps (3)
- URI scheme for ICAPS Identifiers
- urn-scheme (n)
- URI utilities, URN scheme
- urxvt (1)
- (a VT102 emulator for the X window system)
- urxvt-bell-command (1)
- execute a command when the bell rings
- urxvt-block-graphics-to-ascii (1)
- map block graphics to ascii characters
- urxvt-clipboard-osc (1)
- implement the clipboard operating system command se...
- urxvt-example-refresh-hooks (1)
- example of how to use refresh hooks
- urxvt-keysym-list (1)
- implement the "list" keysym expansion.
- urxvt-kuake (1)
- kuake-like hotkey terminal
- urxvt-matcher (1)
- match strings in terminal output and change their rend...
- urxvt-remote-clipboard (1)
- manage a shared and possibly remote clipboard
- urxvt-searchable-scrollback (1)
- incremental scrollback search (enabled by d...
- urxvt-selection-to-clipboard (1)
- copy the selection to the clipboard each t...
- urxvt-xim-onthespot (1)
- implement XIM "on-the-spot" behaviour
- urxvt-xim-onthespot-256color (1)
- implement XIM "on-the-spot" behaviour
- urxvtc (1)
- control the urxvtd daemon
- urxvtc-256color (1)
- control the urxvtd daemon
- usb_add_hcd (9)
- finish generic HCD structure initialization and register
- usb_alloc_coherent (9)
- allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
- usb_altnum_to_altsetting (9)
- get the altsetting structure with a given alte...
- usb_anchor_empty (9)
- is an anchor empty
- usb_anchor_resume_wakeups (9)
- (unknown subject)
- usb_anchor_suspend_wakeups (9)
- (unknown subject)
- usb_anchor_urb (9)
- anchors an URB while it is processed
- usb_block_urb (9)
- reliably prevent further use of an URB
- usb_buffer_dmasync (9)
- synchronize DMA and CPU view of buffer(s)
- usb_buffer_dmasync_sg (9)
- synchronize DMA and CPU view of scatterlist buffe...
- usb_clear_halt (9)
- tells device to clear endpoint halt/stall condition
- usb_composite_setup_continue (9)
- Continue with the control transfer
- usb_create_hcd (9)
- create and initialize an HCD structure
- usb_create_shared_hcd (9)
- create and initialize an HCD structure
- usb_descriptor_fillbuf (9)
- fill buffer with descriptors
- USB_DEVICE_AND_INTERFACE_INFO (9)
- describe a specific usb device with a cla...
- USB_DEVICE_INTERFACE_CLASS (9)
- describe a usb device with a specific interf...
- USB_DEVICE_INTERFACE_NUMBER (9)
- describe a usb device with a specific inter...
- USB_DEVICE_INTERFACE_PROTOCOL (9)
- describe a usb device with a specific int...
- USB_DEVICE_VER (9)
- describe a specific usb device with a version range
- usb_driver_set_configuration (9)
- Provide a way for drivers to change device...
- usb_ep_alloc_request (9)
- allocate a request object to use with this endpoint
- usb_ep_clear_halt (9)
- clears endpoint halt, and resets toggle
- usb_ep_fifo_flush (9)
- flushes contents of a fifo
- usb_ep_set_halt (9)
- sets the endpoint halt feature.
- usb_ep_set_wedge (9)
- sets the halt feature and ignores clear requests
- usb_fill_bulk_urb (9)
- macro to help initialize a bulk urb
- usb_fill_int_urb (9)
- macro to help initialize a interrupt urb
- usb_find_alt_setting (9)
- Given a configuration, find the alternate setting ...
- usb_for_each_dev (9)
- iterate over all USB devices in the system
- usb_free_coherent (9)
- free memory allocated with usb_alloc_coherent
- usb_free_urb (9)
- frees the memory used by a urb when all users of it ar...
- usb_gadget_clear_selfpowered (9)
- clear the device selfpowered feature.
- usb_gadget_connect (9)
- software-controlled connect to USB host
- usb_gadget_disconnect (9)
- software-controlled disconnect from USB host
- usb_gadget_frame_number (9)
- returns the current frame number
- usb_gadget_set_selfpowered (9)
- sets the device selfpowered feature.
- usb_gadget_vbus_connect (9)
- Notify controller that VBUS is powered
- usb_gadget_wakeup (9)
- tries to wake up the host connected to this gadget
- usb_get_dev (9)
- increments the reference count of the usb device struc...
- usb_get_from_anchor (9)
- get an anchor's oldest urb
- usb_get_intf (9)
- increments the reference count of the usb interface st...
- usb_get_urb (9)
- increments the reference count of the urb
- usb_gstrings_attach (9)
- attach gadget strings to a cdev and assign ids
- usb_hc_died (9)
- report abnormal shutdown of a host controller (bus glue)
- usb_hcd_check_unlink_urb (9)
- check whether an URB may be unlinked
- usb_hcd_giveback_urb (9)
- return URB from HCD to device driver
- usb_hcd_irq (9)
- hook IRQs to HCD framework (bus glue)
- usb_hcd_link_urb_to_ep (9)
- add an URB to its endpoint queue
- usb_hcd_pci_probe (9)
- initialize PCI-based HCDs
- usb_hcd_pci_remove (9)
- shutdown processing for PCI-based HCDs
- usb_hcd_pci_shutdown (9)
- shutdown host controller
- usb_hcd_resume_root_hub (9)
- called by HCD to resume its root hub
- usb_hcd_unlink_urb_from_ep (9)
- remove an URB from its endpoint queue
- usb_hub_clear_tt_buffer (9)
- clear control/bulk TT state in high speed hub
- usb_hub_find_child (9)
- Get the pointer of child device attached to the port...
- usb_hub_for_each_child (9)
- iterate over all child devices on the hub
- usb_ifnum_to_if (9)
- get the interface object with a given interface number
- usb_init_urb (9)
- initializes a urb so that it can be used by a USB driver
- usb_kill_anchored_urbs (9)
- cancel transfer requests en masse
- usb_kill_urb (9)
- cancel a transfer request and wait for it to finish
- usb_lock_device_for_reset (9)
- cautiously acquire the lock for a usb device ...
- usb_make_path (9)
- returns stable device path in the usb tree
- usb_match_id (9)
- find first usb_device_id matching device or interface
- usb_modeswitch (1)
- switch mode of "multi-state" USB devices
- usb_poison_anchored_urbs (9)
- cease all traffic from an anchor
- usb_poison_urb (9)
- reliably kill a transfer and prevent further use of an...
- usb_put_dev (9)
- release a use of the usb device structure
- usb_put_intf (9)
- release a use of the usb interface structure
- usb_remove_hcd (9)
- shutdown processing for generic HCDs
- usb_reset_configuration (9)
- lightweight device reset
- usb_root_hub_lost_power (9)
- called by HCD if the root hub lost Vbus power
- usb_scuttle_anchored_urbs (9)
- unanchor all an anchor's urbs
- usb_set_device_state (9)
- change a device's current state (usbcore, hcds)
- usb_sg_cancel (9)
- stop scatter/gather i/o issued by usb_sg_wait
- usb_sg_wait (9)
- synchronously execute scatter/gather request
- usb_speed_string (9)
- Returns human readable-name of the speed.
- usb_state_string (9)
- Returns human readable name for the state.
- usb_string_ids_n (9)
- allocate unused string IDs in batch
- usb_string_ids_tab (9)
- allocate unused string IDs in batch
- usb_submit_urb (9)
- issue an asynchronous transfer request for an endpoint
- usb_unanchor_urb (9)
- unanchors an URB
- usb_unlink_anchored_urbs (9)
- asynchronously cancel transfer requests en masse
- usb_unpoison_anchored_urbs (9)
- let an anchor be used successfully again
- usb_urb_dir_in (9)
- check if an URB describes an IN transfer
- usb_urb_dir_out (9)
- check if an URB describes an OUT transfer
- USB_VENDOR_AND_INTERFACE_INFO (9)
- describe a specific usb vendor with a cla...
- usb_wait_anchor_empty_timeout (9)
- wait for an anchor to be unused
- usbhid-dump (8)
- dump USB HID device report descriptors and streams
- use-devel-checklib (1)
- (DEPRECATED)a script to package Devel::CheckLib with...
- use_screen (3ncurses)
- curses thread support
- use_window (3ncurses)
- curses thread support
- uselib (2)
- load shared library
- uselocale (3)
- set/get the locale for the calling thread
- uselocale (3p)
- use locale in current thread
- user_contexts (5)
- The SELinux user contexts configuration files
- userptr (3form)
- associate application data with a form item
- userptr (3menu)
- associate application data with a menu item
- users (1)
- print the user names of users currently logged in to t...
- usleep_range (9)
- Drop in replacement for udelay where wakeup is flexible
- usual (n)
- access default option-handling commands
- utempter (8)
- privileged helper program for utmp/wtmp updates
- utempter_add_record (8)
- privileged helper program for utmp/wtmp updates
- utempter_remove_added_record (8)
- privileged helper program for utmp/wtmp up...
- utempter_remove_record (8)
- privileged helper program for utmp/wtmp updates
- utempter_set_helper (3)
- utempter interface
- utempter_set_helper (8)
- privileged helper program for utmp/wtmp updates
- utime (2)
- change file last access and modification times
- utime.h (0p)
- access and modification times structure
- utimes (2)
- change file last access and modification times
- utmpx.h (0p)
- user accounting database definitions
- uuid_clear (3)
- reset value of UUID variable to the NULL value
- uuid_compare (3)
- compare whether two UUIDs are the same
- uuid_is_null (3)
- compare the value of the UUID to the NULL value
- uuid_time (3)
- extract the time at which the UUID was created
- uwildmat (3)
- Perform wildmat matching
- vdso (7)
- overview of the virtual ELF dynamic shared object
- va_arg (3p)
- handle variable argument list
- vaclook (1)
- browses .vacation.db and shows addresses
- vacuumlo (1pg161)
- remove orphaned large objects from a PostgreSQL database
- valac (1)
- compiler that translates Vala source code into C sourc...
- valac-0.22 (1)
- compiler that translates Vala source code into C sourc...
- vbr (3)
- Vouch By Reference service facility
- vc (1)
- create a SUSE stype changes entry
- vconsole.conf (5)
- Configuration file for the virtual console
- vcstime (8)
- Show time in upper right hand corner of the console sc...
- verify_bbt_descr (9)
- verify the bad block description
- versionsort (3)
- scan a directory for matching entries
- vfork (2)
- create a child process and block parent
- vfs_aio_pthread (8)
- implement async I/O in Samba vfs using a pthread pool
- vfs_audit (8)
- record selected Samba VFS operations in the system log
- vfs_btrfs (8)
- Utilize features provided by the Btrfs filesystem
- vfs_cacheprime (8)
- prime the kernel file data cache
- vfs_catia (8)
- translate illegal characters in Catia filenames
- vfs_ceph (8)
- Utilize features provided by CephFS
- vfs_commit (8)
- flush dirty data at specified intervals
- vfs_fileid (8)
- Generates file_id structs with unique device id values...
- vfs_fruit (8)
- Enhanced OS X and Netatalk interoperability
- vfs_full_audit (8)
- record Samba VFS operations in the system log
- vfs_media_harmony (8)
- Allow multiple Avid clients to share a network drive.
- vfs_netatalk (8)
- hide .AppleDouble files from CIFS clients
- vfs_notify_fam (8)
- FAM support for file change notifications
- vfs_path_lookup (9)
- lookup a file path relative to a dentry-vfsmount pair
- vfs_prealloc (8)
- preallocate matching files to a predetermined size
- vfs_preopen (8)
- Hide read latencies for applications reading numbered ...
- vfs_readahead (8)
- pre-load the kernel buffer cache
- vfs_readonly (8)
- make a Samba share read only for a specified time period
- vfs_scannedonly (8)
- Ensures that only files that have been scanned for vir...
- vfs_shadow_copy (8)
- Make a Samba share read only for a specified time period
- vfs_shadow_copy2 (8)
- Expose snapshots to Windows clients as shadow copies.
- vfs_shell_snap (8)
- Shell script callouts for snapshot creation and deletion
- vfs_smb_traffic_analyzer (8)
- log Samba VFS read and write operations throug...
- vfs_snapper (8)
- Expose snapshots managed by snapper as shadow-copies
- vfs_syncops (8)
- Ensure meta data operations are performed synchronously.
- vfs_tsmsm (8)
- VFS module for handling offline files with Tivoli Stor...
- vfs_unityed_media (8)
- Allow multiple Avid clients to share a network drive.
- vfs_widelinks (8)
- make a Samba share ignore filesystem symbolic links in...
- vfwprintf (3)
- formatted wide-character output conversion
- vfwprintf (3p)
- wide-character formatted output of a stdarg argument list
- vfwscanf (3p)
- wide-character formatted input of a stdarg argument list
- vgchange (8)
- change attributes of a volume group
- vgck (8)
- check volume group metadata
- vgdb (1)
- intermediary between Valgrind and GDB or a shell
- vgexport (8)
- make volume groups unknown to the system
- vgextend (8)
- add physical volumes to a volume group
- vgimport (8)
- make exported volume groups known to the system
- vgimportclone (8)
- import and rename duplicated volume group (e.g. a hard...
- vgscan (8)
- scan all disks for volume groups and rebuild caches
- vhangup (2)
- virtually hangup the current terminal
- vidtoppm (1)
- archived but not working
- vidwhacker (6x)
- grab images and apply random filters to them
- viewres (1)
- graphical class browser for Xt
- vig_optimize (1)
- Optimise photometric parameters
- vigr (8)
- edit the password, group, shadow-password or shadow-gr...
- vimdiff (1)
- edit two, three or four versions of a file with Vim an...
- vimtutor (1)
- the Vim tutor
- vipw (8)
- edit the password, group, shadow-password or shadow-gr...
- virsh (1)
- management user interface
- virt-clone (1)
- clone existing virtual machine images
- virt-convert (1)
- convert virtual machines between formats
- virt-host-validate (1)
- validate host virtualization setup
- virt-image (1)
- create virtual machines from an image descriptor
- virt-image (5)
- Format of the virtual image XML descriptor
- virt-install (1)
- provision new virtual machines
- virt-xml-validate (1)
- validate libvirt XML files against a schema
- virt_to_phys (9)
- map virtual addresses to physical
- virtfs-proxy-helper (1)
- QEMU 9p virtfs proxy filesystem helper
- virtual_domain_context (5)
- The SELinux virtual machine domain context confi...
- virtual_image_context (5)
- The SELinux virtual machine image context configu...
- vis (3bsd)
- visually encode characters
- visudo (8)
- edit the sudoers file
- vline (3ncurses)
- create curses borders, horizontal and vertical lines
- vline_set (3ncurses)
- create curses borders or lines using complex character...
- vlna (1)
- adds tilde after each non-syllabic preposition
- vm-disks (8)
- manage virtual machines' disks
- vm-install (8)
- define a virtual machine and install its operating system
- vm-install-jobs (8)
- queries and manages VM creation jobs that were started...
- vm_unmap_aliases (9)
- unmap outstanding lazy aliases in the vmap layer
- vmcore-dmesg (8)
- This is just a placeholder until real man page has bee...
- vmsish (3)
- Perl pragma to control VMS-specific language features
- vncpasswd (1)
- change the VNC password
- vprintf (3p)
- format the output of a stdarg argument list
- vswprintf (3)
- formatted wide-character output conversion
- vswprintf (3p)
- wide-character formatted output of a stdarg argument list
- vswscanf (3p)
- wide-character formatted input of a stdarg argument list
- vsyslog (3)
- send messages to the system logger
- vtysh (1)
- a integrated shell for Quagga routing software
- vwprintf (3)
- formatted wide-character output conversion
- vwprintf (3p)
- wide-character formatted output of a stdarg argument list
- vwscanf (3p)
- wide-character formatted input of a stdarg argument list
- vzalloc (9)
- allocate virtually contiguous memory with zero fill
- vzalloc_node (9)
- allocate memory on a specific node with zero fill
- w (1)
- Show who is logged on and what they are doing.
- w1_process_callbacks (9)
- execute each dev->async_list callback entry
- w1_read_bit (9)
- Generates a write-1 cycle and samples the level.
- w1_reset_resume_command (9)
- resume instead of another match ROM
- w1_search (9)
- Performs a ROM Search & registers any devices found.
- w1_touch_bit (9)
- Generates a write-0 or write-1 cycle and samples the l...
- w1_touch_block (9)
- Touches a series of bytes.
- w1_triplet (9)
- * Does a triplet - used for searching ROM addresses.
- w3mman (1)
- an interface to the on-line reference manuals via w3m(1)
- wadd_wch (3ncurses)
- add a complex character and rendition to a curses wind...
- wadd_wchnstr (3ncurses)
- add an array of complex characters (and attributes)...
- wadd_wchstr (3ncurses)
- add an array of complex characters (and attributes) ...
- waddch (3ncurses)
- add a character (with attributes) to a curses window, ...
- waddchnstr (3ncurses)
- add a string of characters (and attributes) to a curs...
- waddchstr (3ncurses)
- add a string of characters (and attributes) to a curse...
- waddnstr (3ncurses)
- add a string of characters to a curses window and adva...
- waddnwstr (3ncurses)
- add a string of wide characters to a curses window and...
- waddstr (3ncurses)
- add a string of characters to a curses window and adva...
- waddwstr (3ncurses)
- add a string of wide characters to a curses window and...
- wait (2)
- wait for process to change state
- wait (3p)
- wait for a child process to stop or terminate
- wait3 (2)
- wait for process to change state, BSD style
- wait4 (2)
- wait for process to change state, BSD style
- wait_event_hrtimeout (9)
- sleep until a condition gets true or a timeout ela...
- wait_event_interruptible_hrtimeout (9)
- sleep until a condition gets true or...
- wait_event_interruptible_lock_irq (9)
- sleep until a condition gets true. Th...
- wait_event_lock_irq (9)
- sleep until a condition gets true. The condition is...
- wait_event_lock_irq_cmd (9)
- sleep until a condition gets true. The conditio...
- wait_for_stable_page (9)
- wait for writeback to finish, if necessary.
- wait_on_bit_lock (9)
- wait for a bit to be cleared, when wanting to set it
- WaitForDoorbellAck (9)
- Wait for IOC doorbell handshake acknowledge
- WaitForDoorbellReply (9)
- Wait for and capture an IOC handshake reply.
- waitid (2)
- wait for process to change state
- waitid (3p)
- wait for a child process to change state
- waitpid (2)
- wait for process to change state
- waitpid (3p)
- wait for a child process to stop or terminate
- wakeup_readers (9)
- wake up readers waiting on a channel
- Wand-config (1)
- get information about the installed version of the Mag...
- wargames (6)
- shall we play a game?
- watch (1)
- execute a program periodically, showing output fullscreen
- watchgnupg (1)
- Read and print logs from a socket
- watchquagga (8)
- a program to monitor the status of quagga daemons
- wattr_get (3ncurses)
- curses character and window attribute control routines
- wattr_off (3ncurses)
- curses character and window attribute control routines
- wattr_on (3ncurses)
- curses character and window attribute control routines
- wattr_set (3ncurses)
- curses character and window attribute control routines
- wattroff (3ncurses)
- curses character and window attribute control routines
- wattron (3ncurses)
- curses character and window attribute control routines
- wattrset (3ncurses)
- curses character and window attribute control routines
- wborder (3ncurses)
- create curses borders, horizontal and vertical lines
- wborder_set (3ncurses)
- create curses borders or lines using complex charact...
- wc (1)
- print newline, word, and byte counts for each file
- wc (1p)
- word, line, and byte or character count
- wchar.h (0p)
- wide-character handling
- wchgat (3ncurses)
- curses character and window attribute control routines
- wcolor_set (3ncurses)
- curses character and window attribute control routines
- wcpcpy (3)
- copy a wide-character string, returning a pointer to i...
- wcpcpy (3p)
- copy a wide-character string, returning a pointer to i...
- wcpncpy (3)
- copy a fixed-size string of wide characters, returning...
- wcpncpy (3p)
- copy a fixed-size wide-character string, returning a p...
- wcrtomb (3)
- convert a wide character to a multibyte sequence
- wcrtomb (3p)
- convert a wide-character code to a character (restarta...
- wcscasecmp (3)
- compare two wide-character strings, ignoring case
- wcscasecmp (3p)
- case-insensitive wide-character string comparison
- wcscat (3)
- concatenate two wide-character strings
- wcscat (3p)
- concatenate two wide-character strings
- wcschr (3)
- search a wide character in a wide-character string
- wcschr (3p)
- wide-character string scanning operation
- wcscmp (3)
- compare two wide-character strings
- wcscmp (3p)
- compare two wide-character strings
- wcscoll (3p)
- wide-character string comparison using collating infor...
- wcscpy (3)
- copy a wide-character string
- wcscpy (3p)
- copy a wide-character string, returning a pointer to i...
- wcscspn (3)
- search a wide-character string for any of a set of wid...
- wcscspn (3p)
- get the length of a complementary wide substring
- wcsdup (3)
- duplicate a wide-character string
- wcsdup (3p)
- duplicate a wide-character string
- wcsftime (3p)
- convert date and time to a wide-character string
- wcslcat (3bsd)
- wide character string manipulation operations
- wcslcpy (3bsd)
- wide character string manipulation operations
- wcslen (3)
- determine the length of a wide-character string
- wcslen (3p)
- get length of a fixed-sized wide-character string
- wcsncasecmp (3)
- compare two fixed-size wide-character strings, ignorin...
- wcsncasecmp (3p)
- case-insensitive wide-character string comparison
- wcsncat (3)
- concatenate two wide-character strings
- wcsncat (3p)
- concatenate a wide-character string with part of another
- wcsncmp (3)
- compare two fixed-size wide-character strings
- wcsncmp (3p)
- compare part of two wide-character strings
- wcsncpy (3)
- copy a fixed-size string of wide characters
- wcsncpy (3p)
- copy a fixed-size wide-character string, returning a p...
- wcsnlen (3)
- determine the length of a fixed-size wide-character st...
- wcsnlen (3p)
- get length of a fixed-sized wide-character string
- wcsnrtombs (3)
- convert a wide-character string to a multibyte string
- wcsnrtombs (3p)
- convert wide-character string to multi-byte string
- wcspbrk (3)
- search a wide-character string for any of a set of wid...
- wcspbrk (3p)
- scan a wide-character string for a wide-character code
- wcsrchr (3)
- search a wide character in a wide-character string
- wcsrchr (3p)
- wide-character string scanning operation
- wcsrtombs (3)
- convert a wide-character string to a multibyte string
- wcsrtombs (3p)
- convert a wide-character string to a character string ...
- wcsspn (3)
- advance in a wide-character string, skipping any of a ...
- wcsspn (3p)
- get the length of a wide substring
- wcsstr (3)
- locate a substring in a wide-character string
- wcsstr (3p)
- find a wide-character substring
- wcstod (3p)
- convert a wide-character string to a double-precision ...
- wcstoimax (3)
- convert wide-character string to integer
- wcstoimax (3p)
- convert a wide-character string to an integer type
- wcstok (3)
- split wide-character string into tokens
- wcstok (3p)
- split a wide-character string into tokens
- wcstol (3p)
- convert a wide-character string to a long integer
- wcstold (3p)
- convert a wide-character string to a double-precision ...
- wcstoll (3p)
- convert a wide-character string to a long integer
- wcstombs (3)
- convert a wide-character string to a multibyte string
- wcstombs (3p)
- convert a wide-character string to a character string
- wcstoul (3p)
- convert a wide-character string to an unsigned long
- wcstoumax (3)
- convert wide-character string to integer
- wcstoumax (3p)
- convert a wide-character string to an integer type
- wcswidth (3)
- determine columns needed for a fixed-size wide-charact...
- wcswidth (3p)
- number of column positions of a wide-character string
- wcsxfrm (3p)
- wide-character string transformation
- wctob (3)
- try to represent a wide character as a single byte
- wctob (3p)
- wide-character to single-byte conversion
- wctomb (3)
- convert a wide character to a multibyte sequence
- wctomb (3p)
- convert a wide-character code to a character
- wctrans (3)
- wide-character translation mapping
- wctrans (3p)
- define character mapping
- wctype (3)
- wide-character classification
- wctype (3p)
- define character class
- wctype.h (0p)
- wide-character classification and mapping utilities
- wcwidth (3)
- determine columns needed for a wide character
- wcwidth (3p)
- number of column positions of a wide-character code
- wdctl (8)
- show hardware watchdog status
- wdelch (3ncurses)
- delete character under the cursor in a curses window
- wdev_priv (9)
- return wiphy priv from wireless_dev
- webcollage (6x)
- decorate the screen with random images from the web
- wecho_wchar (3ncurses)
- add a complex character and rendition to a curses wi...
- wechochar (3ncurses)
- add a character (with attributes) to a curses window, ...
- weechat (1)
- the extensible chat client
- wenclose (3ncurses)
- mouse interface through curses
- wget_wch (3ncurses)
- get (or push back) a wide character from curses termin...
- wget_wstr (3ncurses)
- get an array of wide characters from a curses terminal...
- wgetch (3ncurses)
- get (or push back) characters from curses terminal key...
- wgetn_wstr (3ncurses)
- get an array of wide characters from a curses termina...
- wgetnstr (3ncurses)
- accept character strings from curses terminal keyboard
- wgetstr (3ncurses)
- accept character strings from curses terminal keyboard
- what (1ast)
- display binary identification strings
- what (1p)
- identify SCCS files (DEVELOPMENT)
- whatis (1)
- display one-line manual page descriptions
- whereis (1)
- locate the binary, source, and manual page files for a...
- which (1)
- shows the full path of (shell) commands.
- while (n)
- Execute script repeatedly as long as a condition is met
- whirlpool-hash (1)
- calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or o...
- whirlwindwarp (6x)
- crazy moving stars
- WhitePixel (3)
- Display macros and functions
- WhitePixelOfScreen (3)
- screen information functions and macros
- whline (3ncurses)
- create curses borders, horizontal and vertical lines
- whline_set (3ncurses)
- create curses borders or lines using complex characte...
- who (1)
- show who is logged on
- who (1p)
- display who is on the system
- whoami (1)
- print effective userid
- whois (1)
- client for the whois directory service
- whois.conf (5)
- alternative WHOIS servers list for whois client
- wicked-ethtool (8)
- (unknown subject)
- wicked-redfish (8)
- (unknown subject)
- Widget (n)
- base class for mega-widgets within a frame
- WidthMMOfScreen (3)
- screen information functions and macros
- WidthOfScreen (3)
- screen information functions and macros
- wimax_msg_len (9)
- Return a message's payload length
- wimax_report_rfkill_hw (9)
- Reports changes in the hardware RF switch
- wimax_report_rfkill_sw (9)
- Reports changes in the software RF switch
- wimax_rfkill (9)
- Set the software RF switch state for a WiMAX device
- wimax_state_change (9)
- Set the current state of a WiMAX device
- wimax_state_get (9)
- Return the current state of a WiMAX device
- win_wch (3ncurses)
- extract a complex character and rendition from a window
- win_wchnstr (3ncurses)
- get an array of complex characters and renditions fr...
- win_wchstr (3ncurses)
- get an array of complex characters and renditions fro...
- winbind_krb5_locator (7)
- A plugin for MIT and Heimdal Kerberos for detectin...
- winbind_krb5_locator (8)
- A plugin for MIT and Heimdal Kerberos for detectin...
- winbindd (8)
- Name Service Switch daemon for resolving names from NT...
- winch (3ncurses)
- get a character and attributes from a curses window
- winchnstr (3ncurses)
- get a string of characters (and attributes) from a cur...
- winchstr (3ncurses)
- get a string of characters (and attributes) from a cur...
- winnstr (3ncurses)
- get a string of characters from a curses window
- winnwstr (3ncurses)
- get a string of wchar_t characters from a curses window
- wins_nwstr (3ncurses)
- insert a wide-character string into a curses window
- wins_wch (3ncurses)
- insert a complex character and rendition into a window
- wins_wstr (3ncurses)
- insert a wide-character string into a curses window
- winsch (3ncurses)
- insert a character before cursor in a curses window
- winstr (3ncurses)
- get a string of characters from a curses window
- winwstr (3ncurses)
- get a string of wchar_t characters from a curses window
- wiphy_apply_custom_regulatory (9)
- apply a custom driver regulatory domain
- wiphy_dev (9)
- get wiphy dev pointer
- wiphy_free (9)
- free wiphy
- wiphy_name (9)
- get wiphy name
- wiphy_new (9)
- create a new wiphy for use with cfg80211
- wiphy_priv (9)
- return priv from wiphy
- wiphy_register (9)
- register a wiphy with cfg80211
- wiphy_rfkill_set_hw_state (9)
- notify cfg80211 about hw block state
- wiphy_rfkill_start_polling (9)
- start polling rfkill
- wiphy_rfkill_stop_polling (9)
- stop polling rfkill
- wiphy_unregister (9)
- deregister a wiphy from cfg80211
- wireshark (1)
- Interactively dump and analyze network traffic
- wireshark-filter (4)
- Wireshark filter syntax and reference
- wish (1)
- Simple windowing shell
- wm (n)
- Communicate with window manager
- wmemchr (3)
- search a wide character in a wide-character array
- wmemchr (3p)
- find a wide character in memory
- wmemcmp (3)
- compare two arrays of wide-characters
- wmemcmp (3p)
- compare wide characters in memory
- wmemcpy (3)
- copy an array of wide-characters
- wmemcpy (3p)
- copy wide characters in memory
- wmemmove (3)
- copy an array of wide-characters
- wmemmove (3p)
- copy wide characters in memory with overlapping areas
- wmemset (3)
- fill an array of wide-characters with a constant wide ...
- wmemset (3p)
- set wide characters in memory
- wmouse_trafo (3ncurses)
- mouse interface through curses
- wnoutrefresh (3ncurses)
- refresh curses windows and lines
- wordexp (3)
- perform word expansion like a posix-shell
- wordexp.h (0p)
- word-expansion types
- wordfree (3)
- perform word expansion like a posix-shell
- work_busy (9)
- test whether a work is currently pending or running
- workqueue_congested (9)
- test whether a workqueue is congested
- workspaces (7)
- Working with workspaces
- worm (6)
- Play the growing worm game
- wormhole (6x)
- animation of flying through a wormhole
- wpa_gui (8)
- WPA Graphical User Interface
- wpa_passphrase (8)
- Generate a WPA PSK from an ASCII passphrase for a SSID
- wprintf (3)
- formatted wide-character output conversion
- wprintf (3p)
- print formatted wide-character output
- wq_has_sleeper (9)
- check if there are any waiting processes
- wredrawln (3ncurses)
- refresh curses windows and lines
- wrefresh (3ncurses)
- refresh curses windows and lines
- write (1)
- send a message to another user
- write (1p)
- write to another user
- write_bbt (9)
- [GENERIC] (Re)write the bad block table
- write_cache_pages (9)
- walk the list of dirty pages of the given address spa...
- writeback_in_progress (9)
- determine whether there is writeback in progress
- wscanf (3p)
- convert formatted wide-character input
- wsimport (1)
- Generates JAX-WS portable artifacts that can be packag...
- wsimport-java-1.8.0-openjdk (1)
- Generates JAX-WS portable artifacts that ca...
- wspsearch (1)
- Run Windows Search Protocol searches against a SMB server
- wstandend (3ncurses)
- curses character and window attribute control routines
- wstandout (3ncurses)
- curses character and window attribute control routines
- wtouchln (3ncurses)
- curses refresh control routines
- wump (6)
- hunt the wumpus in an underground cave
- wvline (3ncurses)
- create curses borders, horizontal and vertical lines
- wvline_set (3ncurses)
- create curses borders or lines using complex characte...
- ww_mutex_unlock (9)
- release the w/w mutex
- wwwoffle (1)
- A program to control the World Wide Web Offline Explorer.
- wwwoffle.conf (5)
- The configuration file for the proxy server for the Wo...
- wwwoffled (8)
- A proxy server for the World Wide Web Offline Explorer.
- x11-ssh-askpass (1x)
- an X11-based pass-phrase dialog for use with OpenSSH
- X11::Auth (3pm)
- Perl module to read X11 authority files
- X11::Protocol (3pm)
- Perl module for the X Window System Protocol, version 11
- X11::Protocol::Connection::FileHandle (3pm)
- Perl module base class for File...
- X11::Protocol::Connection::INETFH (3pm)
- Perl module for FileHandle-based TC...
- X11::Protocol::Connection::UNIXFH (3pm)
- Perl module for FileHandle-based Un...
- X11::Protocol::Ext::BIG_REQUESTS (3pm)
- Perl module for the X11 protocol Big...
- X11::Protocol::Ext::DPMS (3pm)
- Perl module for the X11 Protocol DPMS Extension
- X11::Protocol::Ext::RENDER (3pm)
- Perl module for the X Rendering Extension
- X11::Protocol::Ext::SHAPE (3pm)
- Perl module for the X11 Protocol Nonrectang...
- X11::Protocol::Ext::XC_MISC (3pm)
- Perl module for the X11 Protocol XC-MISC ...
- X11::Protocol::Ext::XFree86_Misc (3pm)
- Perl module for the XFree86 Misc Ext...
- X500::DN (3pm)
- handle X.500 DNs (Distinguished Names), parse and form...
- X500::RDN (3pm)
- handle X.500 RDNs (Relative Distinguished Names), pars...
- x509 (7osslssl-3)
- X.509 certificate handling
- X509_ALGOR_cmp (3osslssl-3)
- AlgorithmIdentifier functions
- X509_ALGOR_copy (3osslssl-3)
- AlgorithmIdentifier functions
- X509_ALGOR_dup (3osslssl-3)
- AlgorithmIdentifier functions
- X509_ALGOR_get0 (3osslssl-3)
- AlgorithmIdentifier functions
- X509_ALGOR_set0 (3osslssl-3)
- AlgorithmIdentifier functions
- X509_ALGOR_set_md (3osslssl-3)
- AlgorithmIdentifier functions
- X509_build_chain (3osslssl-3)
- build and verify X509 certificate chain
- X509_chain_up_ref (3osslssl-3)
- X509 certificate ASN1 allocation functions
- X509_check_ca (3osslssl-3)
- check if given certificate is CA certificate
- X509_check_email (3osslssl-3)
- X.509 certificate matching
- X509_check_host (3osslssl-3)
- X.509 certificate matching
- X509_check_ip (3osslssl-3)
- X.509 certificate matching
- X509_check_ip_asc (3osslssl-3)
- X.509 certificate matching
- X509_check_issued (3osslssl-3)
- checks if certificate is apparently issued b...
- X509_check_private_key (3osslssl-3)
- check the consistency of a private key ...
- X509_check_purpose (3osslssl-3)
- Check the purpose of a certificate
- X509_CRL_get_issuer (3osslssl-3)
- get X509_NAME hashes or get and set issuer...
- X509_CRL_http_nbio (3osslssl-3)
- certificate and CRL loading functions
- X509_CRL_load_http (3osslssl-3)
- certificate and CRL loading functions
- X509_CRL_match (3osslssl-3)
- compare X509 certificates and related values
- X509_CRL_set_issuer_name (3osslssl-3)
- get X509_NAME hashes or get and set i...
- X509_get0_authority_issuer (3osslssl-3)
- retrieve certificate extension data
- X509_get0_authority_key_id (3osslssl-3)
- retrieve certificate extension data
- X509_get0_authority_serial (3osslssl-3)
- retrieve certificate extension data
- X509_get0_distinguishing_id (3osslssl-3)
- get or set the Distinguishing ID f...
- X509_get_issuer_name (3osslssl-3)
- get X509_NAME hashes or get and set issue...
- X509_get_pathlen (3osslssl-3)
- retrieve certificate extension data
- X509_get_proxy_pathlen (3osslssl-3)
- retrieve certificate extension data
- X509_get_subject_name (3osslssl-3)
- get X509_NAME hashes or get and set issu...
- X509_http_nbio (3osslssl-3)
- certificate and CRL loading functions
- X509_issuer_name_hash (3osslssl-3)
- get X509_NAME hashes or get and set issu...
- X509_load_cert_file (3osslssl-3)
- Default OpenSSL certificate lookup methods
- X509_load_cert_file_ex (3osslssl-3)
- Default OpenSSL certificate lookup methods
- X509_load_crl_file (3osslssl-3)
- Default OpenSSL certificate lookup methods
- X509_load_http (3osslssl-3)
- certificate and CRL loading functions
- X509_LOOKUP (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_add_dir (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_add_store (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_add_store_ex (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_by_alias (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_by_fingerprint (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_by_issuer_serial (3osslssl-3)
- OpenSSL certificate lookup mechan...
- X509_LOOKUP_by_subject (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_by_subject_ex (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_ctrl (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_ctrl_ex (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_ctrl_fn (3osslssl-3)
- Routines to build up X509_LOOKUP methods
- X509_LOOKUP_file (3osslssl-3)
- Default OpenSSL certificate lookup methods
- X509_LOOKUP_free (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_get_method_data (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_get_store (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_hash_dir (3osslssl-3)
- Default OpenSSL certificate lookup methods
- X509_LOOKUP_init (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_load_file (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_load_file_ex (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_load_store (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_load_store_ex (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_meth_free (3osslssl-3)
- Routines to build up X509_LOOKUP methods
- X509_LOOKUP_meth_get_ctrl (3osslssl-3)
- Routines to build up X509_LOOKUP met...
- X509_LOOKUP_meth_get_free (3osslssl-3)
- Routines to build up X509_LOOKUP met...
- X509_LOOKUP_meth_get_get_by_alias (3osslssl-3)
- Routines to build up X509_LO...
- X509_LOOKUP_meth_get_get_by_fingerprint (3osslssl-3)
- Routines to build up X...
- X509_LOOKUP_meth_get_get_by_issuer_se... (3osslssl-3)
- Routines to build up ...
- X509_LOOKUP_meth_get_get_by_subject (3osslssl-3)
- Routines to build up X509_...
- X509_LOOKUP_meth_get_init (3osslssl-3)
- Routines to build up X509_LOOKUP met...
- X509_LOOKUP_meth_get_new_item (3osslssl-3)
- Routines to build up X509_LOOKUP...
- X509_LOOKUP_meth_get_shutdown (3osslssl-3)
- Routines to build up X509_LOOKUP...
- X509_LOOKUP_meth_new (3osslssl-3)
- Routines to build up X509_LOOKUP methods
- X509_LOOKUP_meth_set_ctrl (3osslssl-3)
- Routines to build up X509_LOOKUP met...
- X509_LOOKUP_meth_set_free (3osslssl-3)
- Routines to build up X509_LOOKUP met...
- X509_LOOKUP_meth_set_get_by_alias (3osslssl-3)
- Routines to build up X509_LO...
- X509_LOOKUP_meth_set_get_by_fingerprint (3osslssl-3)
- Routines to build up X...
- X509_LOOKUP_meth_set_get_by_issuer_se... (3osslssl-3)
- Routines to build up ...
- X509_LOOKUP_meth_set_get_by_subject (3osslssl-3)
- Routines to build up X509_...
- X509_LOOKUP_meth_set_init (3osslssl-3)
- Routines to build up X509_LOOKUP met...
- X509_LOOKUP_meth_set_new_item (3osslssl-3)
- Routines to build up X509_LOOKUP...
- X509_LOOKUP_meth_set_shutdown (3osslssl-3)
- Routines to build up X509_LOOKUP...
- X509_LOOKUP_METHOD (3osslssl-3)
- Routines to build up X509_LOOKUP methods
- X509_LOOKUP_new (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_set_method_data (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_shutdown (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_LOOKUP_store (3osslssl-3)
- Default OpenSSL certificate lookup methods
- X509_LOOKUP_TYPE (3osslssl-3)
- OpenSSL certificate lookup mechanisms
- X509_NAME_hash (3osslssl-3)
- get X509_NAME hashes or get and set issuer or s...
- X509_NAME_hash_ex (3osslssl-3)
- get X509_NAME hashes or get and set issuer o...
- X509_OBJECT_set1_X509 (3osslssl-3)
- Routines to build up X509_LOOKUP methods
- X509_REQ_add_extensions (3osslssl-3)
- handle X.509 extension attributes of a...
- X509_REQ_add_extensions_nid (3osslssl-3)
- handle X.509 extension attributes ...
- X509_REQ_check_private_key (3osslssl-3)
- check the consistency of a private ...
- X509_REQ_get0_distinguishing_id (3osslssl-3)
- get or set the Distinguishing ...
- X509_REQ_get_extensions (3osslssl-3)
- handle X.509 extension attributes of a...
- X509_REQ_get_subject_name (3osslssl-3)
- get X509_NAME hashes or get and set ...
- X509_REQ_set0_distinguishing_id (3osslssl-3)
- get or set the Distinguishing ...
- X509_REQ_set_subject_name (3osslssl-3)
- get X509_NAME hashes or get and set ...
- X509_set0_distinguishing_id (3osslssl-3)
- get or set the Distinguishing ID f...
- X509_set_issuer_name (3osslssl-3)
- get X509_NAME hashes or get and set issue...
- X509_set_proxy_pathlen (3osslssl-3)
- retrieve certificate extension data
- X509_set_subject_name (3osslssl-3)
- get X509_NAME hashes or get and set issu...
- X509_STORE_CTX_check_crl_fn (3osslssl-3)
- set verification callback
- X509_STORE_CTX_check_issued_fn (3osslssl-3)
- set verification callback
- X509_STORE_CTX_check_policy_fn (3osslssl-3)
- set verification callback
- X509_STORE_CTX_check_revocation_fn (3osslssl-3)
- set verification callback
- X509_STORE_CTX_get0_chain (3osslssl-3)
- X509_STORE_CTX initialisation
- X509_STORE_CTX_get1_chain (3osslssl-3)
- get or set certificate verification ...
- X509_STORE_CTX_get_check_crl (3osslssl-3)
- get and set X509_STORE_CTX compon...
- X509_STORE_CTX_get_check_issued (3osslssl-3)
- get and set X509_STORE_CTX com...
- X509_STORE_CTX_get_check_policy (3osslssl-3)
- get and set X509_STORE_CTX com...
- X509_STORE_CTX_get_check_revocation (3osslssl-3)
- get and set X509_STORE_CTX...
- X509_STORE_CTX_get_error_depth (3osslssl-3)
- get or set certificate verifica...
- X509_STORE_CTX_purpose_inherit (3osslssl-3)
- X509_STORE_CTX initialisation
- X509_STORE_CTX_set0_verified_chain (3osslssl-3)
- X509_STORE_CTX initialisation
- X509_STORE_CTX_set_error_depth (3osslssl-3)
- get or set certificate verifica...
- X509_STORE_CTX_verify (3osslssl-3)
- build and verify X509 certificate chain
- X509_STORE_get_check_crl (3osslssl-3)
- set verification callback
- X509_STORE_get_check_issued (3osslssl-3)
- set verification callback
- X509_STORE_get_check_policy (3osslssl-3)
- set verification callback
- X509_STORE_get_check_revocation (3osslssl-3)
- set verification callback
- X509_STORE_load_path (3osslssl-3)
- X509_STORE manipulation
- X509_STORE_set_check_crl (3osslssl-3)
- set verification callback
- X509_STORE_set_check_issued (3osslssl-3)
- set verification callback
- X509_STORE_set_check_policy (3osslssl-3)
- set verification callback
- X509_STORE_set_check_revocation (3osslssl-3)
- set verification callback
- X509_STORE_set_default_paths (3osslssl-3)
- X509_STORE manipulation
- X509_STORE_set_default_paths_ex (3osslssl-3)
- X509_STORE manipulation
- X509_STORE_set_depth (3osslssl-3)
- X509_STORE manipulation
- X509_subject_name_hash (3osslssl-3)
- get X509_NAME hashes or get and set iss...
- X509_verify_cert (3osslssl-3)
- build and verify X509 certificate chain
- X509_VERIFY_PARAM_add1_host (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_get0_host (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_get_auth_level (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_get_depth (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_get_hostflags (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_get_inh_flags (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_set1_host (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_set_auth_level (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_set_depth (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_set_hostflags (3osslssl-3)
- X509 verification parameters
- X509_VERIFY_PARAM_set_inh_flags (3osslssl-3)
- X509 verification parameters
- x86_64 (8)
- change reported architecture in new program environmen...
- XActivateScreenSaver (3)
- manipulate the screen saver
- XAddConnectionWatch (3)
- handle Xlib internal connections
- XAddHost (3)
- control host access and host control structure
- XAddHosts (3)
- control host access and host control structure
- XAddToSaveSet (3)
- change a client's save set
- XAllocClassHint (3)
- allocate class hints structure and set or read a windo...
- XAllocSizeHints (3)
- allocate size hints structure and set or read a window...
- XAllocWMHints (3)
- allocate window manager hints structure and set or rea...
- xasy (1)
- script-based vector graphics language
- Xau (3)
- X authority database routines
- XauDisposeAuth (3)
- X authority database routines
- XauFileName (3)
- X authority database routines
- XauGetAuthByAddr (3)
- X authority database routines
- XauGetBestAuthByAddr (3)
- X authority database routines
- XauLockAuth (3)
- X authority database routines
- XauReadAuth (3)
- X authority database routines
- xauth (1)
- X authority file utility
- XauUnlockAuth (3)
- X authority database routines
- XauWriteAuth (3)
- X authority database routines
- Xaw (3)
- X Athena Widgets
- xbacklight (1)
- adjust backlight brightness using RandR extension
- xbrlapi (1)
- X11 BrlAPI helper for Linux/Unix
- xcb_alloc_color_cells_masks_length (3)
- (unknown subject)
- xcb_alloc_color_cells_pixels_length (3)
- (unknown subject)
- xcb_alloc_color_cells_unchecked (3)
- (unknown subject)
- xcb_alloc_color_planes_pixels_length (3)
- (unknown subject)
- xcb_alloc_color_planes_unchecked (3)
- (unknown subject)
- xcb_alloc_color_unchecked (3)
- Allocate a color
- xcb_alloc_named_color_unchecked (3)
- (unknown subject)
- xcb_allow_events_checked (3)
- release queued events
- xcb_bell_checked (3)
- (unknown subject)
- xcb_big_requests_enable_unchecked (3)
- (unknown subject)
- xcb_change_active_pointer_grab (3)
- (unknown subject)
- xcb_change_active_pointer_grab_checked (3)
- (unknown subject)
- xcb_change_gc (3)
- change graphics context components
- xcb_change_gc_checked (3)
- change graphics context components
- xcb_change_hosts (3)
- (unknown subject)
- xcb_change_hosts_checked (3)
- (unknown subject)
- xcb_change_keyboard_control (3)
- (unknown subject)
- xcb_change_keyboard_control_checked (3)
- (unknown subject)
- xcb_change_keyboard_mapping (3)
- (unknown subject)
- xcb_change_keyboard_mapping_checked (3)
- (unknown subject)
- xcb_change_pointer_control (3)
- (unknown subject)
- xcb_change_pointer_control_checked (3)
- (unknown subject)
- xcb_change_property (3)
- Changes a window property
- xcb_change_property_checked (3)
- Changes a window property
- xcb_change_save_set (3)
- Changes a client's save set
- xcb_change_save_set_checked (3)
- Changes a client's save set
- xcb_change_window_attributes (3)
- change window attributes
- xcb_change_window_attributes_checked (3)
- change window attributes
- xcb_circulate_window (3)
- Change window stacking order
- xcb_circulate_window_checked (3)
- Change window stacking order
- xcb_clear_area_checked (3)
- (unknown subject)
- xcb_close_font_checked (3)
- (unknown subject)
- xcb_colormap_notify_event_t (3)
- the colormap for some window changed
- xcb_composite_get_overlay_window_unch... (3)
- (unknown subject)
- xcb_composite_name_window_pixmap_checked (3)
- (unknown subject)
- xcb_composite_query_version_unchecked (3)
- (unknown subject)
- xcb_composite_redirect_subwindows_che... (3)
- (unknown subject)
- xcb_composite_redirect_window_checked (3)
- (unknown subject)
- xcb_composite_unredirect_window_checked (3)
- (unknown subject)
- xcb_configure_window_checked (3)
- Configures window attributes
- xcb_convert_selection_checked (3)
- (unknown subject)
- xcb_copy_area_checked (3)
- copy areas
- xcb_copy_colormap_and_free_checked (3)
- (unknown subject)
- xcb_copy_gc_checked (3)
- (unknown subject)
- xcb_copy_plane_checked (3)
- (unknown subject)
- xcb_create_colormap_checked (3)
- (unknown subject)
- xcb_create_cursor_checked (3)
- (unknown subject)
- xcb_create_gc (3)
- Creates a graphics context
- xcb_create_gc_checked (3)
- Creates a graphics context
- xcb_create_glyph_cursor (3)
- create cursor
- xcb_create_glyph_cursor_checked (3)
- create cursor
- xcb_create_pixmap_checked (3)
- Creates a pixmap
- xcb_create_window_checked (3)
- Creates a window
- xcb_damage_add_checked (3)
- (unknown subject)
- xcb_damage_create_checked (3)
- (unknown subject)
- xcb_damage_destroy_checked (3)
- (unknown subject)
- xcb_damage_query_version_unchecked (3)
- (unknown subject)
- xcb_damage_subtract_checked (3)
- (unknown subject)
- xcb_delete_property_checked (3)
- (unknown subject)
- xcb_destroy_subwindows_checked (3)
- (unknown subject)
- xcb_destroy_window_checked (3)
- Destroys a window
- xcb_dpms_capable_unchecked (3)
- (unknown subject)
- xcb_dpms_disable_checked (3)
- (unknown subject)
- xcb_dpms_enable_checked (3)
- (unknown subject)
- xcb_dpms_force_level_checked (3)
- (unknown subject)
- xcb_dpms_get_timeouts_unchecked (3)
- (unknown subject)
- xcb_dpms_get_version_unchecked (3)
- (unknown subject)
- xcb_dpms_info_unchecked (3)
- (unknown subject)
- xcb_dpms_set_timeouts_checked (3)
- (unknown subject)
- xcb_dri2_authenticate (3)
- (unknown subject)
- xcb_dri2_authenticate_reply (3)
- (unknown subject)
- xcb_dri2_authenticate_unchecked (3)
- (unknown subject)
- xcb_dri2_connect_alignment_pad_length (3)
- (unknown subject)
- xcb_dri2_connect_device_name_length (3)
- (unknown subject)
- xcb_dri2_connect_driver_name_length (3)
- (unknown subject)
- xcb_dri2_connect_unchecked (3)
- (unknown subject)
- xcb_dri2_copy_region_unchecked (3)
- (unknown subject)
- xcb_dri2_create_drawable_checked (3)
- (unknown subject)
- xcb_dri2_destroy_drawable_checked (3)
- (unknown subject)
- xcb_dri2_get_buffers_buffers_length (3)
- (unknown subject)
- xcb_dri2_get_buffers_unchecked (3)
- (unknown subject)
- xcb_dri2_get_buffers_with_format (3)
- (unknown subject)
- xcb_dri2_get_buffers_with_format_buffers (3)
- (unknown subject)
- xcb_dri2_get_buffers_with_format_buff... (3)
- (unknown subject)
- xcb_dri2_get_buffers_with_format_buff... (3)
- (unknown subject)
- xcb_dri2_get_buffers_with_format_reply (3)
- (unknown subject)
- xcb_dri2_get_buffers_with_format_unch... (3)
- (unknown subject)
- xcb_dri2_get_msc_unchecked (3)
- (unknown subject)
- xcb_dri2_get_param_unchecked (3)
- (unknown subject)
- xcb_dri2_query_version_unchecked (3)
- (unknown subject)
- xcb_dri2_swap_buffers_unchecked (3)
- (unknown subject)
- xcb_dri2_swap_interval_checked (3)
- (unknown subject)
- xcb_dri2_wait_msc_unchecked (3)
- (unknown subject)
- xcb_dri2_wait_sbc_unchecked (3)
- (unknown subject)
- xcb_dri3_buffer_from_pixmap_unchecked (3)
- (unknown subject)
- xcb_dri3_buffers_from_pixmap_unchecked (3)
- (unknown subject)
- xcb_dri3_fd_from_fence_unchecked (3)
- (unknown subject)
- xcb_dri3_fence_from_fd_checked (3)
- (unknown subject)
- xcb_dri3_get_supported_modifiers_unch... (3)
- (unknown subject)
- xcb_dri3_open_unchecked (3)
- (unknown subject)
- xcb_dri3_pixmap_from_buffer_checked (3)
- (unknown subject)
- xcb_dri3_pixmap_from_buffers_checked (3)
- (unknown subject)
- xcb_dri3_query_version_unchecked (3)
- (unknown subject)
- xcb_enter_notify_event_t (3)
- the pointer is in a different window
- xcb_fill_poly_checked (3)
- (unknown subject)
- xcb_force_screen_saver_checked (3)
- (unknown subject)
- xcb_free_colormap_checked (3)
- (unknown subject)
- xcb_free_colors_checked (3)
- (unknown subject)
- xcb_free_cursor_checked (3)
- Deletes a cursor
- xcb_free_gc (3)
- Destroys a graphics context
- xcb_free_gc_checked (3)
- Destroys a graphics context
- xcb_free_pixmap_checked (3)
- Destroys a pixmap
- xcb_ge_generic_event_t (3)
- generic event (with length)
- xcb_genericevent_query_version_unchecked (3)
- (unknown subject)
- xcb_get_atom_name_name_length (3)
- (unknown subject)
- xcb_get_atom_name_unchecked (3)
- (unknown subject)
- xcb_get_font_path (3)
- (unknown subject)
- xcb_get_font_path_path_iterator (3)
- (unknown subject)
- xcb_get_font_path_path_length (3)
- (unknown subject)
- xcb_get_font_path_reply (3)
- (unknown subject)
- xcb_get_font_path_unchecked (3)
- (unknown subject)
- xcb_get_geometry_unchecked (3)
- Get current window geometry
- xcb_get_image_data_length (3)
- (unknown subject)
- xcb_get_image_unchecked (3)
- (unknown subject)
- xcb_get_input_focus_unchecked (3)
- (unknown subject)
- xcb_get_keyboard_control_unchecked (3)
- (unknown subject)
- xcb_get_keyboard_mapping_keysyms_length (3)
- (unknown subject)
- xcb_get_keyboard_mapping_unchecked (3)
- (unknown subject)
- xcb_get_modifier_mapping_keycodes_length (3)
- (unknown subject)
- xcb_get_modifier_mapping_unchecked (3)
- (unknown subject)
- xcb_get_motion_events_events_length (3)
- (unknown subject)
- xcb_get_motion_events_unchecked (3)
- (unknown subject)
- xcb_get_pointer_control_unchecked (3)
- (unknown subject)
- xcb_get_pointer_mapping_map_length (3)
- (unknown subject)
- xcb_get_pointer_mapping_unchecked (3)
- (unknown subject)
- xcb_get_property_unchecked (3)
- Gets a window property
- xcb_get_property_value_length (3)
- Gets a window property
- xcb_get_screen_saver_unchecked (3)
- (unknown subject)
- xcb_get_selection_owner (3)
- Gets the owner of a selection
- xcb_get_selection_owner_reply (3)
- Gets the owner of a selection
- xcb_get_selection_owner_unchecked (3)
- Gets the owner of a selection
- xcb_get_window_attributes_unchecked (3)
- Gets window attributes
- xcb_glx_are_textures_resident_unchecked (3)
- (unknown subject)
- xcb_glx_change_drawable_attributes (3)
- (unknown subject)
- xcb_glx_change_drawable_attributes_ch... (3)
- (unknown subject)
- xcb_glx_client_info_checked (3)
- (unknown subject)
- xcb_glx_copy_context_checked (3)
- (unknown subject)
- xcb_glx_create_context_attribs_arb_ch... (3)
- (unknown subject)
- xcb_glx_create_context_checked (3)
- (unknown subject)
- xcb_glx_create_glx_pixmap_checked (3)
- (unknown subject)
- xcb_glx_create_new_context_checked (3)
- (unknown subject)
- xcb_glx_create_pbuffer_checked (3)
- (unknown subject)
- xcb_glx_create_pixmap_checked (3)
- (unknown subject)
- xcb_glx_create_window_checked (3)
- (unknown subject)
- xcb_glx_delete_lists_checked (3)
- (unknown subject)
- xcb_glx_delete_queries_arb_checked (3)
- (unknown subject)
- xcb_glx_delete_textures_checked (3)
- (unknown subject)
- xcb_glx_delete_window_checked (3)
- (unknown subject)
- xcb_glx_destroy_context_checked (3)
- (unknown subject)
- xcb_glx_destroy_glx_pixmap_checked (3)
- (unknown subject)
- xcb_glx_destroy_pbuffer_checked (3)
- (unknown subject)
- xcb_glx_destroy_pixmap_checked (3)
- (unknown subject)
- xcb_glx_end_list_checked (3)
- (unknown subject)
- xcb_glx_feedback_buffer_checked (3)
- (unknown subject)
- xcb_glx_finish (3)
- (unknown subject)
- xcb_glx_finish_reply (3)
- (unknown subject)
- xcb_glx_finish_unchecked (3)
- (unknown subject)
- xcb_glx_flush (3)
- (unknown subject)
- xcb_glx_flush_checked (3)
- (unknown subject)
- xcb_glx_gen_lists_unchecked (3)
- (unknown subject)
- xcb_glx_gen_queries_arb_data_length (3)
- (unknown subject)
- xcb_glx_gen_queries_arb_unchecked (3)
- (unknown subject)
- xcb_glx_gen_textures_data_length (3)
- (unknown subject)
- xcb_glx_gen_textures_unchecked (3)
- (unknown subject)
- xcb_glx_get_booleanv_data_length (3)
- (unknown subject)
- xcb_glx_get_booleanv_unchecked (3)
- (unknown subject)
- xcb_glx_get_clip_plane_data_length (3)
- (unknown subject)
- xcb_glx_get_clip_plane_unchecked (3)
- (unknown subject)
- xcb_glx_get_color_table_data_length (3)
- (unknown subject)
- xcb_glx_get_color_table_unchecked (3)
- (unknown subject)
- xcb_glx_get_convolution_filter_unchecked (3)
- (unknown subject)
- xcb_glx_get_doublev_data_length (3)
- (unknown subject)
- xcb_glx_get_doublev_unchecked (3)
- (unknown subject)
- xcb_glx_get_drawable_attributes_unche... (3)
- (unknown subject)
- xcb_glx_get_error_unchecked (3)
- (unknown subject)
- xcb_glx_get_fb_configs_unchecked (3)
- (unknown subject)
- xcb_glx_get_floatv_data_length (3)
- (unknown subject)
- xcb_glx_get_floatv_unchecked (3)
- (unknown subject)
- xcb_glx_get_histogram (3)
- (unknown subject)
- xcb_glx_get_histogram_data (3)
- (unknown subject)
- xcb_glx_get_histogram_data_end (3)
- (unknown subject)
- xcb_glx_get_histogram_data_length (3)
- (unknown subject)
- xcb_glx_get_histogram_parameterfv (3)
- (unknown subject)
- xcb_glx_get_histogram_parameterfv_data (3)
- (unknown subject)
- xcb_glx_get_histogram_parameterfv_dat... (3)
- (unknown subject)
- xcb_glx_get_histogram_parameterfv_dat... (3)
- (unknown subject)
- xcb_glx_get_histogram_parameterfv_reply (3)
- (unknown subject)
- xcb_glx_get_histogram_parameterfv_unc... (3)
- (unknown subject)
- xcb_glx_get_histogram_parameteriv (3)
- (unknown subject)
- xcb_glx_get_histogram_parameteriv_data (3)
- (unknown subject)
- xcb_glx_get_histogram_parameteriv_dat... (3)
- (unknown subject)
- xcb_glx_get_histogram_parameteriv_dat... (3)
- (unknown subject)
- xcb_glx_get_histogram_parameteriv_reply (3)
- (unknown subject)
- xcb_glx_get_histogram_parameteriv_unc... (3)
- (unknown subject)
- xcb_glx_get_histogram_reply (3)
- (unknown subject)
- xcb_glx_get_histogram_unchecked (3)
- (unknown subject)
- xcb_glx_get_integerv_data_length (3)
- (unknown subject)
- xcb_glx_get_integerv_unchecked (3)
- (unknown subject)
- xcb_glx_get_lightfv (3)
- (unknown subject)
- xcb_glx_get_lightfv_data (3)
- (unknown subject)
- xcb_glx_get_lightfv_data_end (3)
- (unknown subject)
- xcb_glx_get_lightfv_data_length (3)
- (unknown subject)
- xcb_glx_get_lightfv_reply (3)
- (unknown subject)
- xcb_glx_get_lightfv_unchecked (3)
- (unknown subject)
- xcb_glx_get_lightiv (3)
- (unknown subject)
- xcb_glx_get_lightiv_data (3)
- (unknown subject)
- xcb_glx_get_lightiv_data_end (3)
- (unknown subject)
- xcb_glx_get_lightiv_data_length (3)
- (unknown subject)
- xcb_glx_get_lightiv_reply (3)
- (unknown subject)
- xcb_glx_get_lightiv_unchecked (3)
- (unknown subject)
- xcb_glx_get_mapdv_data_length (3)
- (unknown subject)
- xcb_glx_get_mapdv_unchecked (3)
- (unknown subject)
- xcb_glx_get_mapfv_data_length (3)
- (unknown subject)
- xcb_glx_get_mapfv_unchecked (3)
- (unknown subject)
- xcb_glx_get_mapiv_data_length (3)
- (unknown subject)
- xcb_glx_get_mapiv_unchecked (3)
- (unknown subject)
- xcb_glx_get_materialfv_data_length (3)
- (unknown subject)
- xcb_glx_get_materialfv_unchecked (3)
- (unknown subject)
- xcb_glx_get_materialiv_data_length (3)
- (unknown subject)
- xcb_glx_get_materialiv_unchecked (3)
- (unknown subject)
- xcb_glx_get_minmax_data_length (3)
- (unknown subject)
- xcb_glx_get_minmax_parameterfv_unchecked (3)
- (unknown subject)
- xcb_glx_get_minmax_parameteriv_unchecked (3)
- (unknown subject)
- xcb_glx_get_minmax_unchecked (3)
- (unknown subject)
- xcb_glx_get_pixel_mapfv_data_length (3)
- (unknown subject)
- xcb_glx_get_pixel_mapfv_unchecked (3)
- (unknown subject)
- xcb_glx_get_pixel_mapuiv_data_length (3)
- (unknown subject)
- xcb_glx_get_pixel_mapuiv_unchecked (3)
- (unknown subject)
- xcb_glx_get_pixel_mapusv_data_length (3)
- (unknown subject)
- xcb_glx_get_pixel_mapusv_unchecked (3)
- (unknown subject)
- xcb_glx_get_polygon_stipple_data_length (3)
- (unknown subject)
- xcb_glx_get_polygon_stipple_unchecked (3)
- (unknown subject)
- xcb_glx_get_query_objectiv_arb_unchecked (3)
- (unknown subject)
- xcb_glx_get_query_objectuiv_arb_unche... (3)
- (unknown subject)
- xcb_glx_get_queryiv_arb_data_length (3)
- (unknown subject)
- xcb_glx_get_queryiv_arb_unchecked (3)
- (unknown subject)
- xcb_glx_get_separable_filter_unchecked (3)
- (unknown subject)
- xcb_glx_get_string_string_length (3)
- (unknown subject)
- xcb_glx_get_string_unchecked (3)
- (unknown subject)
- xcb_glx_get_tex_envfv_data_length (3)
- (unknown subject)
- xcb_glx_get_tex_envfv_unchecked (3)
- (unknown subject)
- xcb_glx_get_tex_enviv_data_length (3)
- (unknown subject)
- xcb_glx_get_tex_enviv_unchecked (3)
- (unknown subject)
- xcb_glx_get_tex_gendv_data_length (3)
- (unknown subject)
- xcb_glx_get_tex_gendv_unchecked (3)
- (unknown subject)
- xcb_glx_get_tex_genfv_data_length (3)
- (unknown subject)
- xcb_glx_get_tex_genfv_unchecked (3)
- (unknown subject)
- xcb_glx_get_tex_geniv_data_length (3)
- (unknown subject)
- xcb_glx_get_tex_geniv_unchecked (3)
- (unknown subject)
- xcb_glx_get_tex_image_data_length (3)
- (unknown subject)
- xcb_glx_get_tex_image_unchecked (3)
- (unknown subject)
- xcb_glx_get_tex_parameterfv_data_length (3)
- (unknown subject)
- xcb_glx_get_tex_parameterfv_unchecked (3)
- (unknown subject)
- xcb_glx_get_tex_parameteriv_data_length (3)
- (unknown subject)
- xcb_glx_get_tex_parameteriv_unchecked (3)
- (unknown subject)
- xcb_glx_get_visual_configs_unchecked (3)
- (unknown subject)
- xcb_glx_is_direct_unchecked (3)
- (unknown subject)
- xcb_glx_is_enabled_unchecked (3)
- (unknown subject)
- xcb_glx_is_list_unchecked (3)
- (unknown subject)
- xcb_glx_is_query_arb_unchecked (3)
- (unknown subject)
- xcb_glx_is_texture_unchecked (3)
- (unknown subject)
- xcb_glx_make_context_current_unchecked (3)
- (unknown subject)
- xcb_glx_make_current_unchecked (3)
- (unknown subject)
- xcb_glx_new_list_checked (3)
- (unknown subject)
- xcb_glx_pixel_storef_checked (3)
- (unknown subject)
- xcb_glx_pixel_storei_checked (3)
- (unknown subject)
- xcb_glx_query_context_attribs_length (3)
- (unknown subject)
- xcb_glx_query_context_unchecked (3)
- (unknown subject)
- xcb_glx_query_extensions_string_unche... (3)
- (unknown subject)
- xcb_glx_query_server_string_unchecked (3)
- (unknown subject)
- xcb_glx_query_version_unchecked (3)
- (unknown subject)
- xcb_glx_read_pixels_data_length (3)
- (unknown subject)
- xcb_glx_read_pixels_unchecked (3)
- (unknown subject)
- xcb_glx_render_checked (3)
- (unknown subject)
- xcb_glx_render_large_checked (3)
- (unknown subject)
- xcb_glx_render_mode_data_length (3)
- (unknown subject)
- xcb_glx_render_mode_unchecked (3)
- (unknown subject)
- xcb_glx_select_buffer_checked (3)
- (unknown subject)
- xcb_glx_set_client_info_2arb_checked (3)
- (unknown subject)
- xcb_glx_set_client_info_arb_checked (3)
- (unknown subject)
- xcb_glx_swap_buffers_checked (3)
- (unknown subject)
- xcb_glx_use_x_font_checked (3)
- (unknown subject)
- xcb_glx_vendor_private_checked (3)
- (unknown subject)
- xcb_glx_vendor_private_with_reply (3)
- (unknown subject)
- xcb_glx_vendor_private_with_reply_data_2 (3)
- (unknown subject)
- xcb_glx_vendor_private_with_reply_dat... (3)
- (unknown subject)
- xcb_glx_vendor_private_with_reply_dat... (3)
- (unknown subject)
- xcb_glx_vendor_private_with_reply_reply (3)
- (unknown subject)
- xcb_glx_vendor_private_with_reply_unc... (3)
- (unknown subject)
- xcb_glx_wait_gl_checked (3)
- (unknown subject)
- xcb_glx_wait_x_checked (3)
- (unknown subject)
- xcb_grab_button_checked (3)
- Grab pointer button(s)
- xcb_grab_key_checked (3)
- Grab keyboard key(s)
- xcb_grab_keyboard (3)
- Grab the keyboard
- xcb_grab_keyboard_reply (3)
- Grab the keyboard
- xcb_grab_keyboard_unchecked (3)
- Grab the keyboard
- xcb_grab_pointer (3)
- Grab the pointer
- xcb_grab_pointer_reply (3)
- Grab the pointer
- xcb_grab_pointer_unchecked (3)
- Grab the pointer
- xcb_grab_server_checked (3)
- (unknown subject)
- xcb_graphics_exposure_event_t (3)
- (unknown subject)
- xcb_image_text_16_checked (3)
- Draws text
- xcb_image_text_8_checked (3)
- Draws text
- xcb_input_allow_device_events_checked (3)
- (unknown subject)
- xcb_input_barrier_hit_event_t (3)
- (unknown subject)
- xcb_input_change_device_control (3)
- (unknown subject)
- xcb_input_change_device_control_reply (3)
- (unknown subject)
- xcb_input_change_device_control_unche... (3)
- (unknown subject)
- xcb_input_change_device_dont_propagat... (3)
- (unknown subject)
- xcb_input_change_device_dont_propagat... (3)
- (unknown subject)
- xcb_input_change_device_key_mapping (3)
- (unknown subject)
- xcb_input_change_device_key_mapping_c... (3)
- (unknown subject)
- xcb_input_change_device_notify_event_t (3)
- (unknown subject)
- xcb_input_change_device_property (3)
- (unknown subject)
- xcb_input_change_device_property_checked (3)
- (unknown subject)
- xcb_input_change_feedback_control (3)
- (unknown subject)
- xcb_input_change_feedback_control_che... (3)
- (unknown subject)
- xcb_input_change_keyboard_device (3)
- (unknown subject)
- xcb_input_change_keyboard_device_reply (3)
- (unknown subject)
- xcb_input_change_keyboard_device_unch... (3)
- (unknown subject)
- xcb_input_change_pointer_device (3)
- (unknown subject)
- xcb_input_change_pointer_device_reply (3)
- (unknown subject)
- xcb_input_change_pointer_device_unche... (3)
- (unknown subject)
- xcb_input_close_device_checked (3)
- (unknown subject)
- xcb_input_delete_device_property_checked (3)
- (unknown subject)
- xcb_input_device_bell_checked (3)
- (unknown subject)
- xcb_input_device_changed_event_t (3)
- (unknown subject)
- xcb_input_get_device_control_unchecked (3)
- (unknown subject)
- xcb_input_get_device_focus_unchecked (3)
- (unknown subject)
- xcb_input_get_device_key_mapping_unch... (3)
- (unknown subject)
- xcb_input_get_device_property_unchecked (3)
- (unknown subject)
- xcb_input_get_extension_version_unche... (3)
- (unknown subject)
- xcb_input_get_feedback_control_unchecked (3)
- (unknown subject)
- xcb_input_grab_device_button_checked (3)
- (unknown subject)
- xcb_input_grab_device_key_checked (3)
- (unknown subject)
- xcb_input_grab_device_unchecked (3)
- (unknown subject)
- xcb_input_hierarchy_event_t (3)
- (unknown subject)
- xcb_input_list_device_properties_unch... (3)
- (unknown subject)
- xcb_input_list_input_devices_unchecked (3)
- (unknown subject)
- xcb_input_open_device_class_info_length (3)
- (unknown subject)
- xcb_input_open_device_unchecked (3)
- (unknown subject)
- xcb_input_query_device_state_unchecked (3)
- (unknown subject)
- xcb_input_raw_touch_begin_event_t (3)
- (unknown subject)
- xcb_input_select_extension_event_checked (3)
- (unknown subject)
- xcb_input_send_extension_event_checked (3)
- (unknown subject)
- xcb_input_set_device_focus_checked (3)
- (unknown subject)
- xcb_input_set_device_mode_unchecked (3)
- (unknown subject)
- xcb_input_set_device_valuators_unchecked (3)
- (unknown subject)
- xcb_input_touch_begin_event_t (3)
- (unknown subject)
- xcb_input_touch_ownership_event_t (3)
- (unknown subject)
- xcb_input_ungrab_device_button_checked (3)
- (unknown subject)
- xcb_input_ungrab_device_checked (3)
- (unknown subject)
- xcb_input_ungrab_device_key_checked (3)
- (unknown subject)
- xcb_input_xi_allow_events_checked (3)
- (unknown subject)
- xcb_input_xi_change_cursor (3)
- (unknown subject)
- xcb_input_xi_change_cursor_checked (3)
- (unknown subject)
- xcb_input_xi_change_hierarchy (3)
- (unknown subject)
- xcb_input_xi_change_hierarchy_checked (3)
- (unknown subject)
- xcb_input_xi_change_property (3)
- (unknown subject)
- xcb_input_xi_change_property_checked (3)
- (unknown subject)
- xcb_input_xi_delete_property_checked (3)
- (unknown subject)
- xcb_input_xi_get_client_pointer_unche... (3)
- (unknown subject)
- xcb_input_xi_get_focus_unchecked (3)
- (unknown subject)
- xcb_input_xi_get_property_unchecked (3)
- (unknown subject)
- xcb_input_xi_get_selected_events_unch... (3)
- (unknown subject)
- xcb_input_xi_grab_device_unchecked (3)
- (unknown subject)
- xcb_input_xi_list_properties_unchecked (3)
- (unknown subject)
- xcb_input_xi_passive_grab_device_unch... (3)
- (unknown subject)
- xcb_input_xi_passive_ungrab_device_ch... (3)
- (unknown subject)
- xcb_input_xi_query_device_infos_length (3)
- (unknown subject)
- xcb_input_xi_query_device_unchecked (3)
- (unknown subject)
- xcb_input_xi_query_pointer_unchecked (3)
- (unknown subject)
- xcb_input_xi_query_version_unchecked (3)
- (unknown subject)
- xcb_input_xi_select_events_checked (3)
- (unknown subject)
- xcb_input_xi_set_client_pointer_checked (3)
- (unknown subject)
- xcb_input_xi_set_focus_checked (3)
- (unknown subject)
- xcb_input_xi_ungrab_device_checked (3)
- (unknown subject)
- xcb_input_xi_warp_pointer_checked (3)
- (unknown subject)
- xcb_install_colormap_checked (3)
- (unknown subject)
- xcb_intern_atom_unchecked (3)
- Get atom identifier by name
- xcb_kill_client_checked (3)
- kills a client
- xcb_list_extensions_names_length (3)
- (unknown subject)
- xcb_list_extensions_unchecked (3)
- (unknown subject)
- xcb_list_fonts (3)
- get matching font names
- xcb_list_fonts_names_iterator (3)
- get matching font names
- xcb_list_fonts_names_length (3)
- get matching font names
- xcb_list_fonts_reply (3)
- get matching font names
- xcb_list_fonts_unchecked (3)
- get matching font names
- xcb_list_fonts_with_info (3)
- get matching font names and information
- xcb_list_fonts_with_info_name (3)
- get matching font names and information
- xcb_list_fonts_with_info_name_end (3)
- get matching font names and information
- xcb_list_fonts_with_info_name_length (3)
- get matching font names and inform...
- xcb_list_fonts_with_info_properties (3)
- get matching font names and informa...
- xcb_list_fonts_with_info_properties_i... (3)
- get matching font names and in...
- xcb_list_fonts_with_info_properties_l... (3)
- get matching font names and in...
- xcb_list_fonts_with_info_reply (3)
- get matching font names and information
- xcb_list_fonts_with_info_unchecked (3)
- get matching font names and information
- xcb_list_hosts (3)
- (unknown subject)
- xcb_list_hosts_hosts_iterator (3)
- (unknown subject)
- xcb_list_hosts_hosts_length (3)
- (unknown subject)
- xcb_list_hosts_reply (3)
- (unknown subject)
- xcb_list_hosts_unchecked (3)
- (unknown subject)
- xcb_list_installed_colormaps_unchecked (3)
- (unknown subject)
- xcb_list_properties_atoms_length (3)
- (unknown subject)
- xcb_list_properties_unchecked (3)
- (unknown subject)
- xcb_lookup_color_unchecked (3)
- (unknown subject)
- xcb_map_subwindows_checked (3)
- (unknown subject)
- xcb_map_window_checked (3)
- Makes a window visible
- xcb_mapping_notify_event_t (3)
- keyboard mapping changed
- xcb_no_operation_checked (3)
- (unknown subject)
- xcb_open_font_checked (3)
- opens a font
- xcb_poly_arc_checked (3)
- (unknown subject)
- xcb_poly_fill_arc_checked (3)
- (unknown subject)
- xcb_poly_fill_rectangle_checked (3)
- Fills rectangles
- xcb_poly_line_checked (3)
- draw lines
- xcb_poly_point_checked (3)
- (unknown subject)
- xcb_poly_rectangle_checked (3)
- (unknown subject)
- xcb_poly_segment_checked (3)
- draw lines
- xcb_poly_text_16_checked (3)
- (unknown subject)
- xcb_poly_text_8_checked (3)
- (unknown subject)
- xcb_present_notify_msc_checked (3)
- (unknown subject)
- xcb_present_pixmap_checked (3)
- (unknown subject)
- xcb_present_query_capabilities_unchecked (3)
- (unknown subject)
- xcb_present_query_version_unchecked (3)
- (unknown subject)
- xcb_present_select_input_checked (3)
- (unknown subject)
- xcb_property_notify_event_t (3)
- a window property changed
- xcb_put_image_checked (3)
- (unknown subject)
- xcb_query_best_size_unchecked (3)
- (unknown subject)
- xcb_query_colors_colors_length (3)
- (unknown subject)
- xcb_query_colors_unchecked (3)
- (unknown subject)
- xcb_query_extension (3)
- check if extension is present
- xcb_query_extension_reply (3)
- check if extension is present
- xcb_query_extension_unchecked (3)
- check if extension is present
- xcb_query_font_char_infos (3)
- query font metrics
- xcb_query_font_char_infos_iterator (3)
- query font metrics
- xcb_query_font_char_infos_length (3)
- query font metrics
- xcb_query_font_properties_length (3)
- query font metrics
- xcb_query_font_unchecked (3)
- query font metrics
- xcb_query_keymap_unchecked (3)
- (unknown subject)
- xcb_query_pointer_unchecked (3)
- get pointer coordinates
- xcb_query_text_extents_unchecked (3)
- get text extents
- xcb_query_tree (3)
- query the window tree
- xcb_query_tree_children (3)
- query the window tree
- xcb_query_tree_children_end (3)
- query the window tree
- xcb_query_tree_children_length (3)
- query the window tree
- xcb_query_tree_reply (3)
- query the window tree
- xcb_query_tree_unchecked (3)
- query the window tree
- xcb_randr_add_output_mode_checked (3)
- (unknown subject)
- xcb_randr_change_output_property (3)
- (unknown subject)
- xcb_randr_change_output_property_checked (3)
- (unknown subject)
- xcb_randr_change_provider_property (3)
- (unknown subject)
- xcb_randr_change_provider_property_ch... (3)
- (unknown subject)
- xcb_randr_create_lease_unchecked (3)
- (unknown subject)
- xcb_randr_create_mode_unchecked (3)
- (unknown subject)
- xcb_randr_delete_monitor_checked (3)
- (unknown subject)
- xcb_randr_delete_output_mode_checked (3)
- (unknown subject)
- xcb_randr_delete_output_property_checked (3)
- (unknown subject)
- xcb_randr_delete_provider_property_ch... (3)
- (unknown subject)
- xcb_randr_destroy_mode_checked (3)
- (unknown subject)
- xcb_randr_free_lease_checked (3)
- (unknown subject)
- xcb_randr_get_crtc_gamma_blue_length (3)
- (unknown subject)
- xcb_randr_get_crtc_gamma_green_length (3)
- (unknown subject)
- xcb_randr_get_crtc_gamma_red_length (3)
- (unknown subject)
- xcb_randr_get_crtc_gamma_size_unchecked (3)
- (unknown subject)
- xcb_randr_get_crtc_gamma_unchecked (3)
- (unknown subject)
- xcb_randr_get_crtc_info_outputs_length (3)
- (unknown subject)
- xcb_randr_get_crtc_info_possible_length (3)
- (unknown subject)
- xcb_randr_get_crtc_info_unchecked (3)
- (unknown subject)
- xcb_randr_get_crtc_transform_unchecked (3)
- (unknown subject)
- xcb_randr_get_monitors_monitors_length (3)
- (unknown subject)
- xcb_randr_get_monitors_unchecked (3)
- (unknown subject)
- xcb_randr_get_output_info_clones_length (3)
- (unknown subject)
- xcb_randr_get_output_info_crtcs_length (3)
- (unknown subject)
- xcb_randr_get_output_info_modes_length (3)
- (unknown subject)
- xcb_randr_get_output_info_name_length (3)
- (unknown subject)
- xcb_randr_get_output_info_unchecked (3)
- (unknown subject)
- xcb_randr_get_output_primary_unchecked (3)
- (unknown subject)
- xcb_randr_get_output_property_unchecked (3)
- (unknown subject)
- xcb_randr_get_panning_unchecked (3)
- (unknown subject)
- xcb_randr_get_provider_info_crtcs_length (3)
- (unknown subject)
- xcb_randr_get_provider_info_name_length (3)
- (unknown subject)
- xcb_randr_get_provider_info_unchecked (3)
- (unknown subject)
- xcb_randr_get_provider_property_unche... (3)
- (unknown subject)
- xcb_randr_get_providers_providers_length (3)
- (unknown subject)
- xcb_randr_get_providers_unchecked (3)
- (unknown subject)
- xcb_randr_get_screen_info_rates_length (3)
- (unknown subject)
- xcb_randr_get_screen_info_sizes_length (3)
- (unknown subject)
- xcb_randr_get_screen_info_unchecked (3)
- (unknown subject)
- xcb_randr_get_screen_resources_unchecked (3)
- (unknown subject)
- xcb_randr_get_screen_size_range_unche... (3)
- (unknown subject)
- xcb_randr_list_output_properties_unch... (3)
- (unknown subject)
- xcb_randr_query_output_property_unche... (3)
- (unknown subject)
- xcb_randr_query_version_unchecked (3)
- (unknown subject)
- xcb_randr_screen_change_notify_event_t (3)
- (unknown subject)
- xcb_randr_select_input_checked (3)
- (unknown subject)
- xcb_randr_set_crtc_config_unchecked (3)
- (unknown subject)
- xcb_randr_set_crtc_gamma_checked (3)
- (unknown subject)
- xcb_randr_set_crtc_transform_checked (3)
- (unknown subject)
- xcb_randr_set_monitor_checked (3)
- (unknown subject)
- xcb_randr_set_output_primary_checked (3)
- (unknown subject)
- xcb_randr_set_panning_unchecked (3)
- (unknown subject)
- xcb_randr_set_screen_config_unchecked (3)
- (unknown subject)
- xcb_randr_set_screen_size_checked (3)
- (unknown subject)
- xcb_recolor_cursor_checked (3)
- (unknown subject)
- xcb_record_create_context_checked (3)
- (unknown subject)
- xcb_record_disable_context_checked (3)
- (unknown subject)
- xcb_record_enable_context_data_length (3)
- (unknown subject)
- xcb_record_enable_context_unchecked (3)
- (unknown subject)
- xcb_record_free_context_checked (3)
- (unknown subject)
- xcb_record_get_context_unchecked (3)
- (unknown subject)
- xcb_record_query_version_unchecked (3)
- (unknown subject)
- xcb_record_register_clients_checked (3)
- (unknown subject)
- xcb_record_unregister_clients_checked (3)
- (unknown subject)
- xcb_render_add_glyphs (3)
- (unknown subject)
- xcb_render_add_glyphs_checked (3)
- (unknown subject)
- xcb_render_add_traps_checked (3)
- (unknown subject)
- xcb_render_change_picture (3)
- (unknown subject)
- xcb_render_change_picture_checked (3)
- (unknown subject)
- xcb_render_composite_checked (3)
- (unknown subject)
- xcb_render_composite_glyphs_16 (3)
- (unknown subject)
- xcb_render_composite_glyphs_16_checked (3)
- (unknown subject)
- xcb_render_composite_glyphs_32 (3)
- (unknown subject)
- xcb_render_composite_glyphs_32_checked (3)
- (unknown subject)
- xcb_render_composite_glyphs_8 (3)
- (unknown subject)
- xcb_render_composite_glyphs_8_checked (3)
- (unknown subject)
- xcb_render_create_anim_cursor_checked (3)
- (unknown subject)
- xcb_render_create_conical_gradient_ch... (3)
- (unknown subject)
- xcb_render_create_cursor_checked (3)
- (unknown subject)
- xcb_render_create_glyph_set (3)
- (unknown subject)
- xcb_render_create_glyph_set_checked (3)
- (unknown subject)
- xcb_render_create_linear_gradient_che... (3)
- (unknown subject)
- xcb_render_create_picture_checked (3)
- (unknown subject)
- xcb_render_create_radial_gradient_che... (3)
- (unknown subject)
- xcb_render_create_solid_fill_checked (3)
- (unknown subject)
- xcb_render_fill_rectangles_checked (3)
- (unknown subject)
- xcb_render_free_glyph_set (3)
- (unknown subject)
- xcb_render_free_glyph_set_checked (3)
- (unknown subject)
- xcb_render_free_glyphs (3)
- (unknown subject)
- xcb_render_free_glyphs_checked (3)
- (unknown subject)
- xcb_render_free_picture_checked (3)
- (unknown subject)
- xcb_render_query_filters_aliases_length (3)
- (unknown subject)
- xcb_render_query_filters_filters_length (3)
- (unknown subject)
- xcb_render_query_filters_unchecked (3)
- (unknown subject)
- xcb_render_query_pict_formats_unchecked (3)
- (unknown subject)
- xcb_render_query_version_unchecked (3)
- (unknown subject)
- xcb_render_reference_glyph_set (3)
- (unknown subject)
- xcb_render_reference_glyph_set_checked (3)
- (unknown subject)
- xcb_render_set_picture_filter_checked (3)
- (unknown subject)
- xcb_render_set_picture_transform_checked (3)
- (unknown subject)
- xcb_render_trapezoids_checked (3)
- (unknown subject)
- xcb_render_tri_fan_checked (3)
- (unknown subject)
- xcb_render_tri_strip_checked (3)
- (unknown subject)
- xcb_render_triangles_checked (3)
- (unknown subject)
- xcb_reparent_window_checked (3)
- Reparents a window
- xcb_res_query_client_ids_ids_length (3)
- (unknown subject)
- xcb_res_query_client_ids_unchecked (3)
- (unknown subject)
- xcb_res_query_client_resources_unchecked (3)
- (unknown subject)
- xcb_res_query_clients_clients_length (3)
- (unknown subject)
- xcb_res_query_clients_unchecked (3)
- (unknown subject)
- xcb_res_query_resource_bytes_unchecked (3)
- (unknown subject)
- xcb_res_query_version_unchecked (3)
- (unknown subject)
- xcb_rotate_properties_checked (3)
- (unknown subject)
- xcb_screensaver_query_info_unchecked (3)
- (unknown subject)
- xcb_screensaver_query_version_unchecked (3)
- (unknown subject)
- xcb_screensaver_select_input_checked (3)
- (unknown subject)
- xcb_screensaver_set_attributes_checked (3)
- (unknown subject)
- xcb_screensaver_suspend_checked (3)
- (unknown subject)
- xcb_screensaver_unset_attributes_checked (3)
- (unknown subject)
- xcb_selinux_get_client_context_unchecked (3)
- (unknown subject)
- xcb_selinux_get_device_context_unchecked (3)
- (unknown subject)
- xcb_selinux_get_property_context_unch... (3)
- (unknown subject)
- xcb_selinux_get_window_context_unchecked (3)
- (unknown subject)
- xcb_selinux_list_properties_unchecked (3)
- (unknown subject)
- xcb_selinux_list_selections_unchecked (3)
- (unknown subject)
- xcb_selinux_query_version_unchecked (3)
- (unknown subject)
- xcb_selinux_set_device_context_checked (3)
- (unknown subject)
- xcb_send_event_checked (3)
- send an event
- xcb_set_access_control_checked (3)
- (unknown subject)
- xcb_set_clip_rectangles_checked (3)
- (unknown subject)
- xcb_set_close_down_mode_checked (3)
- (unknown subject)
- xcb_set_dashes (3)
- (unknown subject)
- xcb_set_dashes_checked (3)
- (unknown subject)
- xcb_set_font_path (3)
- (unknown subject)
- xcb_set_font_path_checked (3)
- (unknown subject)
- xcb_set_input_focus_checked (3)
- Sets input focus
- xcb_set_modifier_mapping_unchecked (3)
- (unknown subject)
- xcb_set_pointer_mapping_unchecked (3)
- (unknown subject)
- xcb_set_screen_saver_checked (3)
- (unknown subject)
- xcb_set_selection_owner (3)
- Sets the owner of a selection
- xcb_set_selection_owner_checked (3)
- Sets the owner of a selection
- xcb_shape_combine (3)
- (unknown subject)
- xcb_shape_combine_checked (3)
- (unknown subject)
- xcb_shape_get_rectangles (3)
- (unknown subject)
- xcb_shape_get_rectangles_rectangles (3)
- (unknown subject)
- xcb_shape_get_rectangles_rectangles_i... (3)
- (unknown subject)
- xcb_shape_get_rectangles_rectangles_l... (3)
- (unknown subject)
- xcb_shape_get_rectangles_reply (3)
- (unknown subject)
- xcb_shape_get_rectangles_unchecked (3)
- (unknown subject)
- xcb_shape_input_selected (3)
- (unknown subject)
- xcb_shape_input_selected_reply (3)
- (unknown subject)
- xcb_shape_input_selected_unchecked (3)
- (unknown subject)
- xcb_shape_mask (3)
- (unknown subject)
- xcb_shape_mask_checked (3)
- (unknown subject)
- xcb_shape_notify_event_t (3)
- (unknown subject)
- xcb_shape_offset (3)
- (unknown subject)
- xcb_shape_offset_checked (3)
- (unknown subject)
- xcb_shape_query_extents (3)
- (unknown subject)
- xcb_shape_query_extents_reply (3)
- (unknown subject)
- xcb_shape_query_extents_unchecked (3)
- (unknown subject)
- xcb_shape_query_version (3)
- (unknown subject)
- xcb_shape_query_version_reply (3)
- (unknown subject)
- xcb_shape_query_version_unchecked (3)
- (unknown subject)
- xcb_shape_rectangles (3)
- (unknown subject)
- xcb_shape_rectangles_checked (3)
- (unknown subject)
- xcb_shape_select_input (3)
- (unknown subject)
- xcb_shape_select_input_checked (3)
- (unknown subject)
- xcb_shm_attach (3)
- (unknown subject)
- xcb_shm_attach_checked (3)
- (unknown subject)
- xcb_shm_attach_fd (3)
- (unknown subject)
- xcb_shm_attach_fd_checked (3)
- (unknown subject)
- xcb_shm_completion_event_t (3)
- (unknown subject)
- xcb_shm_create_pixmap (3)
- (unknown subject)
- xcb_shm_create_pixmap_checked (3)
- (unknown subject)
- xcb_shm_create_segment (3)
- (unknown subject)
- xcb_shm_create_segment_reply (3)
- (unknown subject)
- xcb_shm_create_segment_unchecked (3)
- (unknown subject)
- xcb_shm_detach (3)
- (unknown subject)
- xcb_shm_detach_checked (3)
- (unknown subject)
- xcb_shm_get_image (3)
- (unknown subject)
- xcb_shm_get_image_reply (3)
- (unknown subject)
- xcb_shm_get_image_unchecked (3)
- (unknown subject)
- xcb_shm_put_image (3)
- (unknown subject)
- xcb_shm_put_image_checked (3)
- (unknown subject)
- xcb_shm_query_version (3)
- (unknown subject)
- xcb_shm_query_version_reply (3)
- (unknown subject)
- xcb_shm_query_version_unchecked (3)
- (unknown subject)
- xcb_store_colors_checked (3)
- (unknown subject)
- xcb_store_named_color_checked (3)
- (unknown subject)
- xcb_sync_await_checked (3)
- (unknown subject)
- xcb_sync_await_fence_checked (3)
- (unknown subject)
- xcb_sync_change_alarm (3)
- (unknown subject)
- xcb_sync_change_alarm_checked (3)
- (unknown subject)
- xcb_sync_change_counter (3)
- (unknown subject)
- xcb_sync_change_counter_checked (3)
- (unknown subject)
- xcb_sync_create_alarm_checked (3)
- (unknown subject)
- xcb_sync_create_counter_checked (3)
- (unknown subject)
- xcb_sync_create_fence_checked (3)
- (unknown subject)
- xcb_sync_destroy_alarm_checked (3)
- (unknown subject)
- xcb_sync_destroy_counter_checked (3)
- (unknown subject)
- xcb_sync_destroy_fence_checked (3)
- (unknown subject)
- xcb_sync_get_priority_unchecked (3)
- (unknown subject)
- xcb_sync_initialize_unchecked (3)
- (unknown subject)
- xcb_sync_list_system_counters_unchecked (3)
- (unknown subject)
- xcb_sync_query_alarm_unchecked (3)
- (unknown subject)
- xcb_sync_query_counter_unchecked (3)
- (unknown subject)
- xcb_sync_query_fence_unchecked (3)
- (unknown subject)
- xcb_sync_reset_fence_checked (3)
- (unknown subject)
- xcb_sync_set_counter_checked (3)
- (unknown subject)
- xcb_sync_set_priority_checked (3)
- (unknown subject)
- xcb_sync_trigger_fence_checked (3)
- (unknown subject)
- xcb_test_compare_cursor_unchecked (3)
- (unknown subject)
- xcb_test_fake_input_checked (3)
- (unknown subject)
- xcb_test_get_version_unchecked (3)
- (unknown subject)
- xcb_test_grab_control_checked (3)
- (unknown subject)
- xcb_translate_coordinates_unchecked (3)
- (unknown subject)
- xcb_ungrab_button_checked (3)
- (unknown subject)
- xcb_ungrab_key_checked (3)
- release a key combination
- xcb_ungrab_keyboard_checked (3)
- (unknown subject)
- xcb_ungrab_pointer (3)
- release the pointer
- xcb_ungrab_pointer_checked (3)
- release the pointer
- xcb_ungrab_server_checked (3)
- (unknown subject)
- xcb_uninstall_colormap_checked (3)
- (unknown subject)
- xcb_unmap_subwindows_checked (3)
- (unknown subject)
- xcb_unmap_window_checked (3)
- Makes a window invisible
- xcb_warp_pointer_checked (3)
- move mouse pointer
- xcb_x_print_create_context_checked (3)
- (unknown subject)
- xcb_x_print_print_destroy_context_che... (3)
- (unknown subject)
- xcb_x_print_print_end_doc_checked (3)
- (unknown subject)
- xcb_x_print_print_end_job_checked (3)
- (unknown subject)
- xcb_x_print_print_end_page_checked (3)
- (unknown subject)
- xcb_x_print_print_get_attributes_unch... (3)
- (unknown subject)
- xcb_x_print_print_get_context_unchecked (3)
- (unknown subject)
- xcb_x_print_print_input_selected_unch... (3)
- (unknown subject)
- xcb_x_print_print_query_screens_unche... (3)
- (unknown subject)
- xcb_x_print_print_query_version_unche... (3)
- (unknown subject)
- xcb_x_print_print_rehash_printer_list (3)
- (unknown subject)
- xcb_x_print_print_rehash_printer_list... (3)
- (unknown subject)
- xcb_x_print_print_select_input_checked (3)
- (unknown subject)
- xcb_x_print_print_set_attributes_checked (3)
- (unknown subject)
- xcb_x_print_print_set_context_checked (3)
- (unknown subject)
- xcb_x_print_print_start_doc_checked (3)
- (unknown subject)
- xcb_x_print_print_start_job_checked (3)
- (unknown subject)
- xcb_x_print_print_start_page_checked (3)
- (unknown subject)
- xcb_xc_misc_get_version_unchecked (3)
- (unknown subject)
- xcb_xc_misc_get_xid_list_ids_length (3)
- (unknown subject)
- xcb_xc_misc_get_xid_list_unchecked (3)
- (unknown subject)
- xcb_xc_misc_get_xid_range_unchecked (3)
- (unknown subject)
- xcb_xevie_end_unchecked (3)
- (unknown subject)
- xcb_xevie_query_version_unchecked (3)
- (unknown subject)
- xcb_xevie_select_input_unchecked (3)
- (unknown subject)
- xcb_xevie_send_unchecked (3)
- (unknown subject)
- xcb_xevie_start_unchecked (3)
- (unknown subject)
- xcb_xf86dri_auth_connection (3)
- (unknown subject)
- xcb_xf86dri_auth_connection_reply (3)
- (unknown subject)
- xcb_xf86dri_auth_connection_unchecked (3)
- (unknown subject)
- xcb_xf86dri_close_connection_checked (3)
- (unknown subject)
- xcb_xf86dri_create_context_unchecked (3)
- (unknown subject)
- xcb_xf86dri_create_drawable_unchecked (3)
- (unknown subject)
- xcb_xf86dri_destroy_context_checked (3)
- (unknown subject)
- xcb_xf86dri_destroy_drawable_checked (3)
- (unknown subject)
- xcb_xf86dri_get_device_info_unchecked (3)
- (unknown subject)
- xcb_xf86dri_get_drawable_info_unchecked (3)
- (unknown subject)
- xcb_xf86dri_open_connection_unchecked (3)
- (unknown subject)
- xcb_xf86dri_query_version_unchecked (3)
- (unknown subject)
- xcb_xfixes_change_cursor (3)
- (unknown subject)
- xcb_xfixes_change_cursor_by_name (3)
- (unknown subject)
- xcb_xfixes_change_cursor_by_name_checked (3)
- (unknown subject)
- xcb_xfixes_change_cursor_checked (3)
- (unknown subject)
- xcb_xfixes_change_save_set (3)
- (unknown subject)
- xcb_xfixes_change_save_set_checked (3)
- (unknown subject)
- xcb_xfixes_copy_region_checked (3)
- (unknown subject)
- xcb_xfixes_create_pointer_barrier_che... (3)
- (unknown subject)
- xcb_xfixes_create_region_checked (3)
- (unknown subject)
- xcb_xfixes_create_region_from_gc_checked (3)
- (unknown subject)
- xcb_xfixes_delete_pointer_barrier_che... (3)
- (unknown subject)
- xcb_xfixes_destroy_region_checked (3)
- (unknown subject)
- xcb_xfixes_expand_region_checked (3)
- (unknown subject)
- xcb_xfixes_fetch_region (3)
- (unknown subject)
- xcb_xfixes_fetch_region_rectangles (3)
- (unknown subject)
- xcb_xfixes_fetch_region_rectangles_it... (3)
- (unknown subject)
- xcb_xfixes_fetch_region_rectangles_le... (3)
- (unknown subject)
- xcb_xfixes_fetch_region_reply (3)
- (unknown subject)
- xcb_xfixes_fetch_region_unchecked (3)
- (unknown subject)
- xcb_xfixes_get_cursor_image_unchecked (3)
- (unknown subject)
- xcb_xfixes_get_cursor_name_name_length (3)
- (unknown subject)
- xcb_xfixes_get_cursor_name_unchecked (3)
- (unknown subject)
- xcb_xfixes_hide_cursor (3)
- (unknown subject)
- xcb_xfixes_hide_cursor_checked (3)
- (unknown subject)
- xcb_xfixes_intersect_region_checked (3)
- (unknown subject)
- xcb_xfixes_invert_region_checked (3)
- (unknown subject)
- xcb_xfixes_query_version_unchecked (3)
- (unknown subject)
- xcb_xfixes_region_extents_checked (3)
- (unknown subject)
- xcb_xfixes_select_cursor_input_checked (3)
- (unknown subject)
- xcb_xfixes_select_selection_input_che... (3)
- (unknown subject)
- xcb_xfixes_set_cursor_name_checked (3)
- (unknown subject)
- xcb_xfixes_set_gc_clip_region_checked (3)
- (unknown subject)
- xcb_xfixes_set_picture_clip_region_ch... (3)
- (unknown subject)
- xcb_xfixes_set_region_checked (3)
- (unknown subject)
- xcb_xfixes_set_window_shape_region (3)
- (unknown subject)
- xcb_xfixes_set_window_shape_region_ch... (3)
- (unknown subject)
- xcb_xfixes_show_cursor (3)
- (unknown subject)
- xcb_xfixes_show_cursor_checked (3)
- (unknown subject)
- xcb_xfixes_subtract_region_checked (3)
- (unknown subject)
- xcb_xfixes_translate_region_checked (3)
- (unknown subject)
- xcb_xfixes_union_region_checked (3)
- (unknown subject)
- xcb_xinerama_get_screen_count_unchecked (3)
- (unknown subject)
- xcb_xinerama_get_screen_size_unchecked (3)
- (unknown subject)
- xcb_xinerama_get_state_unchecked (3)
- (unknown subject)
- xcb_xinerama_is_active_unchecked (3)
- (unknown subject)
- xcb_xinerama_query_screens_unchecked (3)
- (unknown subject)
- xcb_xinerama_query_version_unchecked (3)
- (unknown subject)
- xcb_xkb_bell_checked (3)
- (unknown subject)
- xcb_xkb_get_compat_map_group_rtrn_length (3)
- (unknown subject)
- xcb_xkb_get_compat_map_si_rtrn_length (3)
- (unknown subject)
- xcb_xkb_get_compat_map_unchecked (3)
- (unknown subject)
- xcb_xkb_get_controls_unchecked (3)
- (unknown subject)
- xcb_xkb_get_device_info_leds_length (3)
- (unknown subject)
- xcb_xkb_get_device_info_name_length (3)
- (unknown subject)
- xcb_xkb_get_device_info_unchecked (3)
- (unknown subject)
- xcb_xkb_get_indicator_map_maps_length (3)
- (unknown subject)
- xcb_xkb_get_indicator_map_unchecked (3)
- (unknown subject)
- xcb_xkb_get_indicator_state_unchecked (3)
- (unknown subject)
- xcb_xkb_get_kbd_by_name_unchecked (3)
- (unknown subject)
- xcb_xkb_get_map_unchecked (3)
- (unknown subject)
- xcb_xkb_get_named_indicator_unchecked (3)
- (unknown subject)
- xcb_xkb_get_names_unchecked (3)
- (unknown subject)
- xcb_xkb_get_state_unchecked (3)
- (unknown subject)
- xcb_xkb_latch_lock_state (3)
- (unknown subject)
- xcb_xkb_latch_lock_state_checked (3)
- (unknown subject)
- xcb_xkb_list_components_keycodes_length (3)
- (unknown subject)
- xcb_xkb_list_components_keymaps_length (3)
- (unknown subject)
- xcb_xkb_list_components_symbols_length (3)
- (unknown subject)
- xcb_xkb_list_components_types_length (3)
- (unknown subject)
- xcb_xkb_list_components_unchecked (3)
- (unknown subject)
- xcb_xkb_per_client_flags_unchecked (3)
- (unknown subject)
- xcb_xkb_select_events_checked (3)
- (unknown subject)
- xcb_xkb_set_compat_map_checked (3)
- (unknown subject)
- xcb_xkb_set_controls_checked (3)
- (unknown subject)
- xcb_xkb_set_debugging_flags_unchecked (3)
- (unknown subject)
- xcb_xkb_set_device_info_checked (3)
- (unknown subject)
- xcb_xkb_set_indicator_map_checked (3)
- (unknown subject)
- xcb_xkb_set_map_checked (3)
- (unknown subject)
- xcb_xkb_set_named_indicator_checked (3)
- (unknown subject)
- xcb_xkb_set_names_checked (3)
- (unknown subject)
- xcb_xkb_use_extension_unchecked (3)
- (unknown subject)
- xcb_xv_get_port_attribute_unchecked (3)
- (unknown subject)
- xcb_xv_get_still_checked (3)
- (unknown subject)
- xcb_xv_get_video_checked (3)
- (unknown subject)
- xcb_xv_grab_port_unchecked (3)
- (unknown subject)
- xcb_xv_list_image_formats_format_length (3)
- (unknown subject)
- xcb_xv_list_image_formats_unchecked (3)
- (unknown subject)
- xcb_xv_put_image_checked (3)
- (unknown subject)
- xcb_xv_put_still_checked (3)
- (unknown subject)
- xcb_xv_put_video_checked (3)
- (unknown subject)
- xcb_xv_query_adaptors_info_length (3)
- (unknown subject)
- xcb_xv_query_adaptors_unchecked (3)
- (unknown subject)
- xcb_xv_query_best_size_unchecked (3)
- (unknown subject)
- xcb_xv_query_encodings_info_length (3)
- (unknown subject)
- xcb_xv_query_encodings_unchecked (3)
- (unknown subject)
- xcb_xv_query_extension_unchecked (3)
- (unknown subject)
- xcb_xv_query_image_attributes_pitches (3)
- (unknown subject)
- xcb_xv_query_image_attributes_pitches... (3)
- (unknown subject)
- xcb_xv_query_image_attributes_pitches... (3)
- (unknown subject)
- xcb_xv_query_image_attributes_unchecked (3)
- (unknown subject)
- xcb_xv_query_port_attributes_unchecked (3)
- (unknown subject)
- xcb_xv_select_port_notify_checked (3)
- (unknown subject)
- xcb_xv_select_video_notify_checked (3)
- (unknown subject)
- xcb_xv_set_port_attribute_checked (3)
- (unknown subject)
- xcb_xv_shm_put_image (3)
- (unknown subject)
- xcb_xv_shm_put_image_checked (3)
- (unknown subject)
- xcb_xv_stop_video_checked (3)
- (unknown subject)
- xcb_xv_ungrab_port_checked (3)
- (unknown subject)
- xcb_xvmc_create_context_priv_data_length (3)
- (unknown subject)
- xcb_xvmc_create_context_unchecked (3)
- (unknown subject)
- xcb_xvmc_create_subpicture_unchecked (3)
- (unknown subject)
- xcb_xvmc_create_surface_priv_data_length (3)
- (unknown subject)
- xcb_xvmc_create_surface_unchecked (3)
- (unknown subject)
- xcb_xvmc_destroy_context_checked (3)
- (unknown subject)
- xcb_xvmc_destroy_subpicture_checked (3)
- (unknown subject)
- xcb_xvmc_destroy_surface_checked (3)
- (unknown subject)
- xcb_xvmc_list_subpicture_types_unchecked (3)
- (unknown subject)
- xcb_xvmc_list_surface_types_unchecked (3)
- (unknown subject)
- xcb_xvmc_query_version_unchecked (3)
- (unknown subject)
- XChangeActivePointerGrab (3)
- grab the pointer
- XChangeDeviceControl (3)
- query and change input device controls
- XChangeDeviceDontPropagateList (3)
- query or change the dont-propagate-list ...
- XChangeDeviceKeyMapping (3)
- query or change device key mappings
- XChangeDeviceProperty (3)
- Get, change or delete a device's property.
- XChangeFeedbackControl (3)
- query and change input device feedbacks
- XChangeGC (3)
- create or free graphics contexts and graphics context ...
- XChangeKeyboardControl (3)
- manipulate keyboard settings and keyboard contro...
- XChangeKeyboardDevice (3)
- change which device is used as the X keyboard
- XChangeKeyboardMapping (3)
- manipulate keyboard encoding and keyboard encodi...
- XChangePointerControl (3)
- control pointer
- XChangePointerDevice (3)
- change which device is the X pointer
- XChangeProperty (3)
- obtain and change window properties
- XChangeSaveSet (3)
- change a client's save set
- XChangeWindowAttributes (3)
- change window attributes
- XChar2b (3)
- load or unload fonts and font metric structures
- XCharStruct (3)
- load or unload fonts and font metric structures
- XCheckIfEvent (3)
- check the event queue with a predicate procedure
- XCheckMaskEvent (3)
- select events by type
- XCheckTypedEvent (3)
- select events by type
- XCheckTypedWindowEvent (3)
- select events by type
- XCheckWindowEvent (3)
- select events by type
- XCirculateSubwindows (3)
- change window stacking order
- XCirculateSubwindowsDown (3)
- change window stacking order
- XCirculateSubwindowsUp (3)
- change window stacking order
- XClassHint (3)
- allocate class hints structure and set or read a windo...
- XCloseIM (3)
- open, close, and obtain input method information
- XCloseOM (3)
- open output methods
- xcmap (1x)
- displays the default colormap on X11 displays
- XcmsCIELabQueryMaxC (3)
- obtain the CIE L*a*b* coordinates
- XcmsCIELabQueryMaxL (3)
- obtain the CIE L*a*b* coordinates
- XcmsCIELabQueryMaxLC (3)
- obtain the CIE L*a*b* coordinates
- XcmsCIELabQueryMinL (3)
- obtain the CIE L*a*b* coordinates
- XcmsCIELuvQueryMaxC (3)
- obtain the CIE L*u*v* coordinates
- XcmsCIELuvQueryMaxL (3)
- obtain the CIE L*u*v* coordinates
- XcmsCIELuvQueryMaxLC (3)
- obtain the CIE L*u*v* coordinates
- XcmsCIELuvQueryMinL (3)
- obtain the CIE L*u*v* coordinates
- xcmsdb (1)
- Device Color Characterization utility for X Color Mana...
- XcmsDefaultCCC (3)
- obtain the default CCC for a screen
- XcmsQueryBlack (3)
- obtain black, blue, green, red, and white CCC color sp...
- XcmsQueryBlue (3)
- obtain black, blue, green, red, and white CCC color sp...
- XcmsQueryGreen (3)
- obtain black, blue, green, red, and white CCC color sp...
- XcmsQueryRed (3)
- obtain black, blue, green, red, and white CCC color sp...
- XcmsQueryWhite (3)
- obtain black, blue, green, red, and white CCC color sp...
- XcmsSetWhiteAdjustProc (3)
- modifying CCC attributes
- XcmsSetWhitePoint (3)
- modifying CCC attributes
- XcmsTekHVC (3)
- Xcms color structure
- XcmsTekHVCQueryMaxC (3)
- obtain the TekHVC coordinates
- XcmsTekHVCQueryMaxV (3)
- obtain the TekHVC coordinates
- XcmsTekHVCQueryMaxVC (3)
- obtain the TekHVC coordinates
- XcmsTekHVCQueryMaxVSamples (3)
- obtain the TekHVC coordinates
- XcmsTekHVCQueryMinV (3)
- obtain the TekHVC coordinates
- XConfigureWindow (3)
- configure windows and window changes structure
- xconsole (1)
- monitor system console messages with X
- XCopyGC (3)
- create or free graphics contexts and graphics context ...
- XCreateGC (3)
- create or free graphics contexts and graphics context ...
- XCreateGlyphCursor (3)
- create cursors
- XCreateIC (3)
- create, destroy, and obtain the input method of an inp...
- XcupGetReservedColormapEntries (3)
- list colormap entries reserved by the sy...
- XcupQueryVersion (3)
- Returns TOG-CUP protocol version supported by the X se...
- XcupStoreColors (3)
- initialize shareable colormap entries at specific loca...
- XcursorSetTheme (3)
- Cursor management library
- XcursorShapeLoadCursor (3)
- Cursor management library
- XcursorShapeLoadCursors (3)
- Cursor management library
- XcursorShapeLoadImage (3)
- Cursor management library
- XcursorShapeLoadImages (3)
- Cursor management library
- xcutsel (1)
- interchange between cut buffer and selection
- XdbeBeginIdiom (3)
- marks the beginning of a DBE idiom sequence.
- XdbeEndIdiom (3)
- marks the end of a DBE idiom sequence.
- XdbeQueryExtension (3)
- returns the version of DBE supported by the server.
- XDeleteDeviceProperty (3)
- Get, change or delete a device's property.
- XDeleteProperty (3)
- obtain and change window properties
- XDestroyIC (3)
- create, destroy, and obtain the input method of an inp...
- XDeviceBell (3)
- ring a bell on a device supported through the input ex...
- XDeviceTimeCoord (3)
- get device motion history
- xdg-desktop-icon (1)
- command line tool for (un)installing icons to the desktop
- xdg-email (1)
- command line tool for sending mail using the user's pr...
- xdg-open (1)
- opens a file or URL in the user's preferred application
- xdg-screensaver (1)
- command line tool for controlling the screensaver
- xdg-settings (1)
- get various settings from the desktop environment
- XDGA (3)
- Client library for the XFree86-DGA extension.
- XDGAChangePixmapMode (3)
- Client library for the XFree86-DGA extension.
- XDGACloseFramebuffer (3)
- Client library for the XFree86-DGA extension.
- XDGACopyArea (3)
- Client library for the XFree86-DGA extension.
- XDGACopyTransparentArea (3)
- Client library for the XFree86-DGA extension.
- XDGACreateColormap (3)
- Client library for the XFree86-DGA extension.
- XDGAFillRectangle (3)
- Client library for the XFree86-DGA extension.
- XDGAGetViewportStatus (3)
- Client library for the XFree86-DGA extension.
- XDGAInstallColormap (3)
- Client library for the XFree86-DGA extension.
- XDGAKeyEventToXKeyEvent (3)
- Client library for the XFree86-DGA extension.
- XDGAOpenFramebuffer (3)
- Client library for the XFree86-DGA extension.
- XDGAQueryExtension (3)
- Client library for the XFree86-DGA extension.
- XDGAQueryModes (3)
- Client library for the XFree86-DGA extension.
- XDGAQueryVersion (3)
- Client library for the XFree86-DGA extension.
- XDGASelectInput (3)
- Client library for the XFree86-DGA extension.
- XDGASetClientVersion (3)
- Client library for the XFree86-DGA extension.
- XDGASetMode (3)
- Client library for the XFree86-DGA extension.
- XDGASetViewport (3)
- Client library for the XFree86-DGA extension.
- XDGASync (3)
- Client library for the XFree86-DGA extension.
- XDisableAccessControl (3)
- control host access and host control structure
- XDisplayMotionBufferSize (3)
- send events and pointer motion history structure
- XDisplayName (3)
- default error handlers
- XDisplayOfIM (3)
- open, close, and obtain input method information
- XDisplayOfOM (3)
- open output methods
- xdm (1)
- X Display Manager with support for XDMCP, host chooser
- Xdmx (1)
- Distributed Multi-head X server
- xdmxconfig (1)
- a graphical configuration tool for Xdmx configuration ...
- xdr_authunix_parms (3)
- library routines for remote procedure calls
- xdr_buf_trim (9)
- lop at most len bytes off the end of buf
- xdr_callhdr (3)
- library routines for remote procedure calls
- xdr_char (3)
- library routines for external data representation
- xdr_encode_opaque (9)
- Encode variable length opaque data
- xdr_encode_opaque_fixed (9)
- Encode fixed length opaque data
- xdr_enter_page (9)
- decode data from the XDR page
- xdr_opaque_auth (3)
- library routines for remote procedure calls
- xdr_set_scratch_buffer (9)
- Attach a scratch buffer for decoding data.
- xdr_short (3)
- library routines for external data representation
- xdr_stream_pos (9)
- Return the current offset from the start of the xdr_st...
- xdr_u_char (3)
- library routines for external data representation
- xdr_u_short (3)
- library routines for external data representation
- XDrawString (3)
- draw text characters
- XDrawString16 (3)
- draw text characters
- xdvi (1)
- DVI Previewer for the X Window System
- XEnableAccessControl (3)
- control host access and host control structure
- Xephyr (1)
- X server outputting to a window on a pre-existing X di...
- XEventsQueued (3)
- handle output buffer or event queue
- XExtentsOfFontSet (3)
- obtain the maximum extents structure for a font set
- xeyes (1)
- a follow the mouse X demo
- XF86DGA (3)
- Client library for the XFree86-DGA extension.
- XF86Misc (3)
- Extension library for the XFree86-Misc X extension.
- XF86MiscGetKbdSettings (3)
- Extension library for the XFree86-Misc X extension.
- XF86MiscGetMouseSettings (3)
- Extension library for the XFree86-Misc X exten...
- XF86MiscGetSaver (3)
- Extension library for the XFree86-Misc X extension.
- XF86MiscQueryExtension (3)
- Extension library for the XFree86-Misc X extension.
- XF86MiscQueryVersion (3)
- Extension library for the XFree86-Misc X extension.
- XF86MiscSetKbdSettings (3)
- Extension library for the XFree86-Misc X extension.
- XF86MiscSetMouseSettings (3)
- Extension library for the XFree86-Misc X exten...
- XF86MiscSetSaver (3)
- Extension library for the XFree86-Misc X extension.
- XF86VidModeDeleteModeLine (3)
- Extension library for the XFree86-VidMode X e...
- XF86VidModeGetAllModeLines (3)
- Extension library for the XFree86-VidMode X ...
- XF86VidModeGetDotClocks (3)
- Extension library for the XFree86-VidMode X ext...
- XF86VidModeGetGamma (3)
- Extension library for the XFree86-VidMode X extension
- XF86VidModeGetGammaRamp (3)
- Extension library for the XFree86-VidMode X ext...
- XF86VidModeGetGammaRampSize (3)
- Extension library for the XFree86-VidMode X...
- XF86VidModeGetModeLine (3)
- Extension library for the XFree86-VidMode X exte...
- XF86VidModeGetMonitor (3)
- Extension library for the XFree86-VidMode X exten...
- XF86VidModeGetPermissions (3)
- Extension library for the XFree86-VidMode X e...
- XF86VidModeGetViewPort (3)
- Extension library for the XFree86-VidMode X exte...
- XF86VidModeLockModeSwitch (3)
- Extension library for the XFree86-VidMode X e...
- XF86VidModeModModeLine (3)
- Extension library for the XFree86-VidMode X exte...
- XF86VidModeQueryExtension (3)
- Extension library for the XFree86-VidMode X e...
- XF86VidModeQueryVersion (3)
- Extension library for the XFree86-VidMode X ext...
- XF86VidModeSetClientVersion (3)
- Extension library for the XFree86-VidMode X...
- XF86VidModeSetGamma (3)
- Extension library for the XFree86-VidMode X extension
- XF86VidModeSetGammaRamp (3)
- Extension library for the XFree86-VidMode X ext...
- XF86VidModeSetViewPort (3)
- Extension library for the XFree86-VidMode X exte...
- XF86VidModeSwitchMode (3)
- Extension library for the XFree86-VidMode X exten...
- XF86VidModeSwitchToMode (3)
- Extension library for the XFree86-VidMode X ext...
- XF86VidModeValidateModeLine (3)
- Extension library for the XFree86-VidMode X...
- XF86VM (3)
- Extension library for the XFree86-VidMode X extension
- xfce4-power-manager (1)
- The Xfce 4 Power manager
- xfce4-power-manager-settings (1)
- Settings dialog for the Xfce 4 Power manager
- xfce4-screenshooter (1)
- application to take screenshots
- xfce4-session (1)
- Starts up the Xfce Desktop Environment
- xfd (1)
- display all the characters in an X font
- xfdesktop (1)
- The Xfce 4 Desktop Environment's desktop manager
- XFetchBuffer (3)
- manipulate cut and paste buffers
- XFetchBytes (3)
- manipulate cut and paste buffers
- XFetchName (3)
- set or read a window's WM_NAME property
- XFilterEvent (3)
- filter X events for an input method
- XFlush (3)
- handle output buffer or event queue
- XFocusChangeEvent (3)
- FocusIn and FocusOut event structure
- Xfontcache (3)
- X-TrueType font cache extension client library
- XForceScreenSaver (3)
- manipulate the screen saver
- XFree86-DGA (3)
- Client library for the XFree86-DGA extension.
- XFreeEventData (3)
- retrieve and free additional event data through cookies.
- XFreeFontPath (3)
- set, get, or free the font search path
- XFreeGC (3)
- create or free graphics contexts and graphics context ...
- xfs (5)
- layout of the XFS filesystem
- xfs_admin (8)
- change parameters of an XFS filesystem
- xfs_check (8)
- check XFS filesystem consistency
- xfs_copy (8)
- copy the contents of an XFS filesystem
- xfs_estimate (8)
- estimate the space that an XFS filesystem will take
- xfs_io (8)
- debug the I/O path of an XFS filesystem
- xfs_logprint (8)
- print the log of an XFS filesystem
- xfs_ncheck (8)
- generate pathnames from i-numbers for XFS
- xgamma (1)
- Alter a monitor's gamma correction through the X server
- xgc (1)
- X graphics demo
- XGContextFromGC (3)
- create or free graphics contexts and graphics context ...
- XGCValues (3)
- create or free graphics contexts and graphics context ...
- XGenericEventCookie (3)
- retrieve and free additional event data through coo...
- XGetClassHint (3)
- allocate class hints structure and set or read a windo...
- XGetDeviceButtonMapping (3)
- query or change device button mappings
- XGetDeviceControl (3)
- query and change input device controls
- XGetDeviceDontPropagateList (3)
- query or change the dont-propagate-list for...
- XGetDeviceKeyMapping (3)
- query or change device key mappings
- XGetDeviceModifierMapping (3)
- query or change device modifier mappings
- XGetDeviceMotionEvents (3)
- get device motion history
- XGetDeviceProperty (3)
- Get, change or delete a device's property.
- XGetErrorDatabaseText (3)
- default error handlers
- XGetErrorText (3)
- default error handlers
- XGetEventData (3)
- retrieve and free additional event data through cookies.
- XGetExtensionVersion (3)
- query the version of the input extension.
- XGetFeedbackControl (3)
- query and change input device feedbacks
- XGetFontPath (3)
- set, get, or free the font search path
- XGetGCValues (3)
- create or free graphics contexts and graphics context ...
- XGetIMValues (3)
- open, close, and obtain input method information
- XGetMotionEvents (3)
- send events and pointer motion history structure
- XGetOMValues (3)
- open output methods
- XGetScreenSaver (3)
- manipulate the screen saver
- XGetSelectedExtensionEvents (3)
- select extension events, get the list of cu...
- XGetTransientForHint (3)
- set or read a window's WM_TRANSIENT_FOR property
- XGetWindowProperty (3)
- obtain and change window properties
- XGetWMClientMachine (3)
- set or read a window's WM_CLIENT_MACHINE property
- XGetWMHints (3)
- allocate window manager hints structure and set or rea...
- XGetWMNormalHints (3)
- allocate size hints structure and set or read a windo...
- XGetWMSizeHints (3)
- allocate size hints structure and set or read a window...
- XGetXCBConnection (3)
- get the XCB connection for an Xlib Display
- XGrabDevice (3)
- grab/release the specified extension device
- XGrabKeyboard (3)
- grab the keyboard
- XGrabPointer (3)
- grab the pointer
- XGrabServer (3)
- grab the server
- XGraphicsExposeEvent (3)
- GraphicsExpose and NoExpose event structures
- xhost (1)
- server access control program for X
- XHostAddress (3)
- control host access and host control structure
- XIChangeHierarchy (3)
- change the device hierarchy.
- XIChangeProperty (3)
- change, retrieve or delete a device's property.
- XIDeleteProperty (3)
- change, retrieve or delete a device's property.
- XIfEvent (3)
- check the event queue with a predicate procedure
- XIGetClientPointer (3)
- set or get the ClientPointer device.
- XIGetFocus (3)
- set or get the device's focus.
- XIGetProperty (3)
- change, retrieve or delete a device's property.
- XIGetSelectedEvents (3)
- select for or get selected XI2 events on the window.
- XIGrabDevice (3)
- grab or ungrab the device.
- XIGrabTouchBegin (3)
- grab/ungrab buttons or keys
- XIMOfIC (3)
- create, destroy, and obtain the input method of an inp...
- xine-config (1)
- script to get information about the installed version ...
- xinetd (8)
- the extended Internet services daemon
- XInitThreads (3)
- multi-threading support
- XInternalConnectionNumbers (3)
- handle Xlib internal connections
- XIntersectRegion (3)
- region arithmetic
- XIQueryVersion (3)
- announce and query the support XI2 version.
- XISelectEvents (3)
- select for or get selected XI2 events on the window.
- XISetClientPointer (3)
- set or get the ClientPointer device.
- XISetFocus (3)
- set or get the device's focus.
- XIUngrabDevice (3)
- grab or ungrab the device.
- XIUngrabTouchBegin (3)
- grab/ungrab buttons or keys
- xjc (1)
- Compiles an XML schema file into fully annotated Java ...
- xjc-java-1.7.0-openjdk (1)
- Java(TM) Architecture for XML Binding
- xjc-java-1.8.0-openjdk (1)
- Compiles an XML schema file into fully annotated...
- XkbActionCtrls (3)
- Returns the ctrls fields of act converted to an unsign...
- XkbAddGeomKey (3)
- Add one key at the end of an existing row of keys
- XkbAddGeomOutline (3)
- Add one outline to an existing shape
- XkbAddGeomShape (3)
- Add a shape to a keyboard geometry
- XkbAddSymInterpret (3)
- Add a symbol interpretation to the list of symbol in...
- XkbAllocControls (3)
- Allocates an XkbControlsRec structure in the XkbDescRec
- XkbAllocGeomDoodads (3)
- Allocate doodads that are global to a keyboard geom...
- XkbAllocGeomSectionDoodads (3)
- Allocate doodads that are specific to a section
- XkbAllocGeomShapes (3)
- Allocate space for an arbitrary number of geometry s...
- XkbAllocIndicatorMaps (3)
- Allocates, directly, the indicators member of the...
- XkbAllocKeyboard (3)
- Creates a keyboard description from scratch
- XkbApplyCompatMapToKey (3)
- Apply the new compatibility mapping to an indivi...
- XkbBellEvent (3)
- Provides a function that initiates a bell event for th...
- XkbChangeControls (3)
- Provides a flexible method for updating the controls ...
- XkbChangeDeviceInfo (3)
- Update the server's description of a device with th...
- XkbChangeEnabledControls (3)
- Manipulates the EnabledControls control
- XkbChangeIndicators (3)
- Changes indicator maps or state without passing the...
- XkbChangeMap (3)
- Update only partial components of a keyboard descripti...
- XkbChangeNames (3)
- _summary-line_
- XkbChangeTypesOfKey (3)
- Change the number of groups and the types bound to ...
- XkbComputeRowBounds (3)
- Update the bounding box of a row
- XkbComputeSectionBounds (3)
- Update the bounding box of a section
- XkbComputeShapeBounds (3)
- Updates the bounding box of a shape
- XkbComputeShapeTop (3)
- Determines the bounding box of the top surface of a ...
- XkbCopyKeyTypes (3)
- Copy more than one XkbKeyTypeRec structure
- XkbDeviceBell (3)
- Rings the bell on an X input extension device or the d...
- XkbFindOverlayForKey (3)
- Find the alternate name by using the primary name ...
- XkbForceDeviceBell (3)
- Rings the bell on any keyboard, overriding user pref...
- XkbFreeClientMap (3)
- Free memory used by the client map member of an XkbDes...
- XkbFreeComponentList (3)
- Free the structure returned by XkbListComponents
- XkbFreeControls (3)
- Frees memory used by the ctrls member of an XkbDescRec...
- XkbFreeGeomShapes (3)
- Free geometry shapes
- XkbFreeIndicatorMaps (3)
- Frees memory used by the indicators member of an X...
- XkbFreeKeyboard (3)
- Destroys either an entire XkbDescRec or just some of i...
- XkbFreeServerMap (3)
- Free memory used by the server member of an XkbDescRec...
- XkbGetAccessXTimeout (3)
- Queries the current AccessXTimeout options for a k...
- XkbGetAutoRepeatRate (3)
- Gets the current attributes of the RepeatKeys cont...
- XkbGetAutoResetControls (3)
- Gets the current values of the auto-reset controls
- XkbGetBounceKeysDelay (3)
- Queries the current BounceKeys delay for a keyboa...
- XkbGetCompatMap (3)
- Fetch any combination of the current compatibility map...
- XkbGetControls (3)
- Finds the current state of Xkb server controls
- XkbGetControlsChanges (3)
- Updates a local copy of a keyboard description wi...
- XkbGetDetectableAutoRepeat (3)
- Determines whether or not the server support...
- XkbGetDeviceButtonActions (3)
- Query the button actions associated with an X...
- XkbGetDeviceInfo (3)
- Determine whether the X server allows Xkb access to pa...
- XkbGetDeviceInfoChanges (3)
- Query the changes that have occurred in the but...
- XkbGetDeviceLedInfo (3)
- Query the indicator names, maps, and state associat...
- XkbGetGeometry (3)
- Loads a keyboard geometry if you already have the keyb...
- XkbGetIndicatorChanges (3)
- Updates a local copy of the keyboard description...
- XkbGetIndicatorMap (3)
- Gets the map for one or more indicators, using a mas...
- XkbGetIndicatorState (3)
- Obtains the current state of the keyboard indicators
- XkbGetKeyActions (3)
- Update the actions (the key_acts array) for a subset o...
- XkbGetKeyBehaviors (3)
- Obtain the behaviors (the behaviors array) for a sub...
- XkbGetKeyExplicitComponents (3)
- Obtain the explicit components (the explici...
- XkbGetKeyModifierMap (3)
- Update the modifier map for one or more of the key...
- XkbGetKeySyms (3)
- Obtain the symbols for a subset of the keys in a keybo...
- XkbGetKeyTypes (3)
- Obtain the list of available key types in the server's...
- XkbGetKeyVirtualModMap (3)
- Obtain the virtual modifier map (the vmodmap arr...
- XkbGetMap (3)
- Allocate an XkbDescRec structure and populate it with ...
- XkbGetNameChanges (3)
- Update the local copy of the keyboard description wit...
- XkbGetNamedGeometry (3)
- Loads a keyboard geometry description from this dat...
- XkbGetNamedIndicator (3)
- Look up the indicator map and other information fo...
- XkbGetNames (3)
- Obtain symbolic names from the server
- XkbGetSlowKeysDelay (3)
- Gets the SlowKeys acceptance delay for a keyboard d...
- XkbGetState (3)
- Obtains the keyboard state
- XkbGetStickyKeysOptions (3)
- Queries the current StickyKeys attributes for a...
- XkbGetUpdatedMap (3)
- Update the client or server map information in an exis...
- XkbGetVirtualMods (3)
- Obtain a subset of the virtual modifier bindings (the...
- XkbGetXlibControls (3)
- Determines the current state of the Library Controls
- XkbInitCanonicalKeyTypes (3)
- Set the definitions of the canonical key types...
- XkbKeyAction (3)
- Returns the key action
- XkbKeyActionEntry (3)
- Returns a pointer to the key action corresponding to ...
- XkbKeyActionsPtr (3)
- Returns a pointer to the two-dimensional array of key ...
- XkbKeycodeToKeysym (3)
- Finds the keysym bound to a particular key at a spec...
- XkbKeyGroupInfo (3)
- Returns the number of groups of symbols bound to the k...
- XkbKeyGroupsWidth (3)
- Computes the maximum width associated with the key co...
- XkbKeyGroupWidth (3)
- Computes the width of the type associated with the gro...
- XkbKeyHasActions (3)
- Determines if the key corresponding to keycode has any...
- XkbKeyNumActions (3)
- Computes the number of actions associated with the key...
- XkbKeyNumGroups (3)
- Returns the number of groups of symbols bound to the k...
- XkbKeyNumSyms (3)
- Returns the total number of keysyms for the key corres...
- XkbKeySymEntry (3)
- Returns the keysym corresponding to shift level shift ...
- XkbKeySymsOffset (3)
- Returns the offset of the two-dimensional array of key...
- XkbKeySymsPtr (3)
- Returns the pointer to the two-dimensional array of ke...
- XkbKeysymToModifiers (3)
- Finds the set of modifiers bound to a particular k...
- XkbKeyType (3)
- Obtain the index of a key type or the pointer to a key...
- XkbKeyTypeIndex (3)
- Obtain the index of a key type or the pointer to a key...
- XkbKeyTypesForCoreSymbols (3)
- Determine the Xkb key types appropriate for t...
- XkbLatchGroup (3)
- Latches the keysym group
- XkbLatchModifiers (3)
- Latches and unlatches any of the eight real keyboard ...
- XkbLibraryVersion (3)
- Determines the compatibility of a library at runtime.
- XkbLockGroup (3)
- Locks the keysym group
- XkbLockModifiers (3)
- Locks and unlocks any of the eight real keyboard modif...
- XkbLookupKeyBinding (3)
- Find the string bound to a key by XRebindKeySym
- XkbLookupKeySym (3)
- Find the symbol associated with a key for a particular...
- XkbModActionVMods (3)
- Returns the vmods1 and vmods2 fields of act converted...
- XkbNoteControlsChanges (3)
- Notes the changes in a changes structure when a ...
- XkbNoteDeviceChanges (3)
- Note device changes reported in an XkbExtensionDev...
- XkbNoteIndicatorChanges (3)
- Notes the changes in a changes structure
- XkbNoteNameChanges (3)
- Note the changed names in a changes structure
- XkbOpenDisplay (3)
- Checks for a compatible version of the Xkb extension i...
- XkbOutOfRangeGroupInfo (3)
- Returns only the out-of-range processing informa...
- XkbOutOfRangeGroupNumber (3)
- Returns the out-of-range group number, represe...
- XkbPtrActionX (3)
- Returns the high_XXX and low_XXX fields of act convert...
- XkbPtrActionY (3)
- Returns the high_YYY and low_YYY fields of act convert...
- XkbQueryExtension (3)
- Determines the compatibility of a library at runtime.
- XkbRefreshKeyboardMapping (3)
- Update the keyboard description that is inter...
- XkbResizeKeyActions (3)
- Change the number of actions bound to a key
- XkbResizeKeySyms (3)
- Change the number of symbols bound to a key
- XkbResizeKeyType (3)
- Change the number of levels in a key type
- XkbSAActionSetCtrls (3)
- Sets the ctrls0 through ctrls3 fields of act from c...
- XkbSAGroup (3)
- Returns the group_XXX field of act converted to a sign...
- XkbSAPtrDfltValue (3)
- Returns the valueXXX field of act converted to a sign...
- XkbSARedirectSetVMods (3)
- Sets the vmods0 and vmods1 of act from v
- XkbSARedirectSetVModsMask (3)
- Sets the vmods_mask0 and vmods_mask1 fields o...
- XkbSARedirectVMods (3)
- Returns the vmods0 and vmods1 fields of act converte...
- XkbSARedirectVModsMask (3)
- Returns the vmods_mask0 and vmods_mask1 fields o...
- XkbSAScreen (3)
- Returns the screenXXX field of act converted to a sign...
- XkbSASetGroup (3)
- Sets the group_XXX field of act from the group index grp
- XkbSASetPtrDfltValue (3)
- Sets the valueXXX field of act from val
- XkbSASetScreen (3)
- Sets the screenXXX field of act from s
- XkbSetAccessXTimeout (3)
- Configures the AccessXTimeout options for a keyboa...
- XkbSetAutoRepeatRate (3)
- Sets the attributes of the RepeatKeys control for ...
- XkbSetAutoResetControls (3)
- Changes the current values of the AutoReset con...
- XkbSetBounceKeysDelay (3)
- Sets the BounceKeys delay for a keyboard device
- XkbSetCompatMap (3)
- Modify the server's compatibility map
- XkbSetControls (3)
- Copies changes to the X server based on a modified ctr...
- XkbSetDebuggingFlags (3)
- Change the values of any of the debug controls
- XkbSetDeviceButtonActions (3)
- Change only the button actions for an input e...
- XkbSetDeviceInfo (3)
- Modify some or all of the characteristics of an X Inpu...
- XkbSetIgnoreLockMods (3)
- Sets the modifiers that, if locked, are not to be ...
- XkbSetIndicatorMap (3)
- Downloads the changes to the server based on modific...
- XkbSetModActionVMods (3)
- Sets the vmods1 and vmods2 fields of act using the...
- XkbSetNames (3)
- Change the symbolic names in the server
- XkbSetPtrActionX (3)
- Sets the high_XXX and low_XXX fields of act from the s...
- XkbSetPtrActionY (3)
- Sets the high_YYY and low_YYY fields of act from the s...
- XkbSetServerInternalMods (3)
- Sets the modifiers that are consumed by the se...
- XkbSetXlibControls (3)
- Changes the state of the Library Controls
- XkbTranslateKeySym (3)
- Find the string and symbol associated with a keysym ...
- XkbUpdateMapFromCore (3)
- Update a local Xkb keyboard map to reflect the map...
- XkbVirtualModsToReal (3)
- Determines the mapping of virtual modifiers to cor...
- xkbwatch (1)
- XKB extension user utility
- xli (1x)
- load images into an X11 window or onto the root window
- XListDepths (3)
- Display macros and functions
- XListFontsWithInfo (3)
- obtain or free font names and information
- XListHosts (3)
- control host access and host control structure
- XListProperties (3)
- obtain and change window properties
- xloadimage (1x)
- load images into an X11 window or onto the root window
- XLocaleOfIM (3)
- open, close, and obtain input method information
- XLocaleOfOM (3)
- open output methods
- XLockDisplay (3)
- multi-threading support
- XLookupKeysym (3)
- handle keyboard input events in Latin-1
- XLookupString (3)
- handle keyboard input events in Latin-1
- XLowerWindow (3)
- change window stacking order
- xlyap (6x)
- display an array of Lyapunov exponents graphically
- xmag (1)
- magnify parts of the screen
- xman (1)
- Manual page display program for the X Window System
- XMatchVisualInfo (3)
- obtain visual information and visual structure
- xmatrix (6x)
- simulates the computer displays from the movie
- XmbLookupString (3)
- obtain composed input from an input method
- XmbResetIC (3)
- reset the state of an input context
- XmbTextEscapement (3)
- obtain the escapement of text
- XmbTextPerCharExtents (3)
- obtain per-character information for a text string
- XmbufChangeBufferAttributes (3)
- X multibuffering functions
- XmbufChangeWindowAttributes (3)
- X multibuffering functions
- xml2-config (1)
- script to get information about the installed version ...
- XML::XPath::Function (3)
- implementations of XPath functions
- xml_merge (1)
- merge back XML files split with C<xml_split>
- xml_spellcheck (1)
- spellcheck XML files
- xml_split (1)
- cut a big XML file into smaller chunks
- xmlgraphics-fop (1)
- Formatter for Printing XSLT Processed XML Files
- xmlgraphics-fop-fontlist (1)
- (unknown subject)
- xmlgraphics-fop-fontmetric (1)
- Reads TTF files and Generates Appropriate Fo...
- xmlto (1)
- apply an XSL stylesheet to an XML document
- xmms2 (1)
- offers a simple command-line interface to the XMMS2 da...
- xmms2-et (1)
- transmits an anonymous informative packet to the XMMS2...
- xmms2-launcher (1)
- XMMS2 daemon launcher
- xmms2-mdns-avahi (1)
- announces XMMS2 via mDNS
- xmms2-ripper (1)
- dumps the audio currently played to stdout
- xmms2d (1)
- XMMS2 daemon which handles the playback of music and s...
- xmore (1)
- plain text display program for the X Window System
- XMoveResizeWindow (3)
- configure windows and window changes structure
- XMoveWindow (3)
- configure windows and window changes structure
- XNoExposeEvent (3)
- GraphicsExpose and NoExpose event structures
- XOffsetRegion (3)
- region arithmetic
- xon (1x)
- start an X program on a remote machine
- XOpenIM (3)
- open, close, and obtain input method information
- XOpenOM (3)
- open output methods
- xpath (1)
- a script to query XPath statements in XML documents.
- XpDestroyContext (3)
- Gets the current print context-id for a display connec...
- XPeekIfEvent (3)
- check the event queue with a predicate procedure
- XpEndDoc (3)
- Indicates the ending of a print document.
- XPending (3)
- handle output buffer or event queue
- XpEndJob (3)
- Indicates the ending of a single print job.
- XpEndPage (3)
- Indicates the end of a print page.
- XpGetAttributes (3)
- Gets an attribute pool from the specified print context.
- XpGetContext (3)
- Gets the current print context-id for a display connec...
- XpGetImageResolution (3)
- Gets the current image resolution for a print cont...
- XpGetLocaleHinter (3)
- Gets a pointer to and description of the current "loc...
- XpGetOneAttribute (3)
- Gets a single print attribute from the specified prin...
- XpGetPageDimensions (3)
- Gets the page dimensions for the current printer se...
- XpGetPdmStartParams (3)
- Builds up parameters in accordance with the PDM Sel...
- XpGetScreenOfContext (3)
- Obtains a pointer to the screen associated with th...
- XpInputSelected (3)
- Queries which X Print events the client has selected t...
- xplsprinters (1x)
- shows a list of Xprint printers and it's attributes
- XpQueryExtension (3)
- Queries an X Server to determine if it supports the X ...
- XpQueryScreens (3)
- Queries an X Server to determine which screens, of all...
- XpQueryVersion (3)
- Queries an X Server to determine if it supports the X ...
- xprehashprinterlist (1x)
- Recomputes the list of available printers.
- Xprint (7)
- The "X print service" - a portable, network-transparen...
- XProcessInternalConnection (3)
- handle Xlib internal connections
- xprt_complete_rqst (9)
- called when reply processing is complete
- xprt_release_rqst_cong (9)
- housekeeping when request is complete
- xprt_release_xprt (9)
- allow other requests to use a transport
- xprt_release_xprt_cong (9)
- allow other requests to use a transport
- xprt_write_space (9)
- wake the task waiting for transport output buffer space
- XpSelectInput (3)
- Specifies which X Print events, from the specified pri...
- XpSetAttributes (3)
- Sets or updates an attribute pool in the specified pri...
- XpSetContext (3)
- Sets or unsets a print context with the specified disp...
- XpSetImageResolution (3)
- Sets the resolution for subsequent PutImage requests
- XpSetLocaleHinter (3)
- Sets a "locale hinter" function and description of it.
- XpStartDoc (3)
- Indicates the beginning of a print document.
- XpStartJob (3)
- Indicates the beginning of a single print job.
- XpStartPage (3)
- Indicates the beginning of a print page.
- XPutBackEvent (3)
- put events back on the queue
- XQueryDeviceState (3)
- query the state of an extension input device.
- XRaiseWindow (3)
- change window stacking order
- xrayswarm (6x)
- swarms with color trails.
- xrdp-chansrv (8)
- xrdp channel server
- xrdp-sesrun (8)
- sesman(8) session launcher
- XRebindKeysym (3)
- handle keyboard input events in Latin-1
- xrefresh (1)
- refresh all or part of an X screen
- XRefreshKeyboardMapping (3)
- handle keyboard input events in Latin-1
- XRegisterIMInstantiateCallback (3)
- open, close, and obtain input method inf...
- XRemoveConnectionWatch (3)
- handle Xlib internal connections
- XRemoveFromSaveSet (3)
- change a client's save set
- XRemoveHost (3)
- control host access and host control structure
- XRemoveHosts (3)
- control host access and host control structure
- XResetScreenSaver (3)
- manipulate the screen saver
- XResizeWindow (3)
- configure windows and window changes structure
- XRestackWindows (3)
- change window stacking order
- XrmGetResource (3)
- retrieve database resources and search lists
- XrmInitialize (3)
- initialize the Resource Manager, Resource Manager stru...
- XrmOptionDescRec (3)
- initialize the Resource Manager, Resource Manager stru...
- XrmOptionKind (3)
- initialize the Resource Manager, Resource Manager stru...
- XrmParseCommand (3)
- initialize the Resource Manager, Resource Manager stru...
- XrmQGetResource (3)
- retrieve database resources and search lists
- XrmQGetSearchList (3)
- retrieve database resources and search lists
- XrmQGetSearchResource (3)
- retrieve database resources and search lists
- XrmValue (3)
- initialize the Resource Manager, Resource Manager stru...
- XRotateWindowProperties (3)
- obtain and change window properties
- xrx (1)
- RX helper program
- xscreensaver-demo (1)
- interactively control the background xscreensaver daemon
- xscreensaver-getimage (1)
- put some randomly-selected image on the root window
- xscreensaver-getimage-file (1)
- put a randomly-selected image on the root wi...
- xscreensaver-getimage-video (1)
- put a video frame on the root window
- xscreensaver-gl-helper (6x)
- figure out which X visual to use for GL programs
- xsd (1)
- Mono's utility for generating schema or class files
- XSelectExtensionEvent (3)
- select extension events, get the list of currentl...
- XSendEvent (3)
- send events and pointer motion history structure
- XSetAccessControl (3)
- control host access and host control structure
- XSetAfterFunction (3)
- enable or disable synchronization
- XSetClassHint (3)
- allocate class hints structure and set or read a windo...
- XSetDashes (3)
- GC convenience routines
- XSetDeviceButtonMapping (3)
- query or change device button mappings
- XSetDeviceMode (3)
- change the mode of a device
- XSetDeviceModifierMapping (3)
- query or change device modifier mappings
- XSetDeviceValuators (3)
- initialize the valuators on an extension input device
- XSetErrorHandler (3)
- default error handlers
- XSetEventQueueOwner (3)
- set event queue owner on a shared Xlib/XCB connection
- XSetFontPath (3)
- set, get, or free the font search path
- XSetGraphicsExposure (3)
- GC convenience routines
- XSetIMValues (3)
- open, close, and obtain input method information
- XSetIOErrorHandler (3)
- default error handlers
- xsetmode (1x)
- set the mode for an X Input device
- XSetOMValues (3)
- open output methods
- xsetpointer (1x)
- set an X Input device as the main pointer
- XSetScreenSaver (3)
- manipulate the screen saver
- XSetTransientForHint (3)
- set or read a window's WM_TRANSIENT_FOR property
- XSetWindowBackground (3)
- change window attributes
- XSetWindowBackgroundPixmap (3)
- change window attributes
- XSetWindowBorder (3)
- change window attributes
- XSetWindowBorderPixmap (3)
- change window attributes
- XSetWindowBorderWidth (3)
- configure windows and window changes structure
- XSetWindowColormap (3)
- change window attributes
- XSetWMClientMachine (3)
- set or read a window's WM_CLIENT_MACHINE property
- XSetWMHints (3)
- allocate window manager hints structure and set or rea...
- XSetWMNormalHints (3)
- allocate size hints structure and set or read a windo...
- XSetWMSizeHints (3)
- allocate size hints structure and set or read a window...
- XShape (3)
- X nonrectangular shape functions
- XShapeCombineMask (3)
- X nonrectangular shape functions
- XShapeCombineRectangles (3)
- X nonrectangular shape functions
- XShapeCombineRegion (3)
- X nonrectangular shape functions
- XShapeCombineShape (3)
- X nonrectangular shape functions
- XShapeGetRectangles (3)
- X nonrectangular shape functions
- XShapeInputSelected (3)
- X nonrectangular shape functions
- XShapeOffsetShape (3)
- X nonrectangular shape functions
- XShapeQueryExtension (3)
- X nonrectangular shape functions
- XShapeQueryExtents (3)
- X nonrectangular shape functions
- XShapeQueryVersion (3)
- X nonrectangular shape functions
- XShapeSelectInput (3)
- X nonrectangular shape functions
- XShm (3)
- X Shared Memory extension functions
- XShmAttach (3)
- X Shared Memory extension functions
- XShmCreateImage (3)
- X Shared Memory extension functions
- XShmCreatePixmap (3)
- X Shared Memory extension functions
- XShmDetach (3)
- X Shared Memory extension functions
- XShmGetEventBase (3)
- X Shared Memory extension functions
- XShmGetImage (3)
- X Shared Memory extension functions
- XShmPixmapFormat (3)
- X Shared Memory extension functions
- XShmPutImage (3)
- X Shared Memory extension functions
- XShmQueryExtension (3)
- X Shared Memory extension functions
- XShmQueryVersion (3)
- X Shared Memory extension functions
- XShrinkRegion (3)
- region arithmetic
- XSizeHints (3)
- allocate size hints structure and set or read a window...
- xspirograph (6x)
- simulates the rotation of a disk inside a circular rim
- XSubtractRegion (3)
- region arithmetic
- XSync (3)
- handle output buffer or event queue
- XSynchronize (3)
- enable or disable synchronization
- XtAddEventHandler (3)
- add and remove event handlers
- XtAddRawEventHandler (3)
- add and remove event handlers
- XtAllocateGC (3)
- obtain a sharable GC with modifiable fields
- XtAppAddActionHook (3)
- register an action hook procedure
- XtAppAddBlockHook (3)
- register a block hook procedure
- XtAppCreateShell (3)
- create top-level widget instance
- XtAppError (3)
- low-level error handlers
- XtAppErrorMsg (3)
- high-level error handlers
- XtAppGetExitFlag (3)
- thread support functions
- XtAppReleaseCacheRefs (3)
- decrement reference counts for resources
- XtAppSetErrorHandler (3)
- low-level error handlers
- XtAppSetErrorMsgHandler (3)
- high-level error handlers
- XtAppSetExitFlag (3)
- thread support functions
- XtAppSetWarningHandler (3)
- low-level error handlers
- XtAppSetWarningMsgHandler (3)
- high-level error handlers
- XtAppWarning (3)
- low-level error handlers
- XtAppWarningMsg (3)
- high-level error handlers
- XtChangeManagedSet (3)
- manage and unmanage children
- XtCheckSubclass (3)
- obtain and verify a widget's class
- XtCreateApplicationShell (3)
- create top-level widget instance
- XtCreatePopupShell (3)
- create a popup shell
- XtDispatchEvent (3)
- query and process events and input
- XtDispatchEventToWidget (3)
- extension event handling
- xtermset (1)
- change settings of an xterm
- XtError (3)
- low-level error handlers
- XtErrorMsg (3)
- high-level error handlers
- XTestCompareCurrentCursorWithWindow (3)
- XTest extension functions
- XTestCompareCursorWithWindow (3)
- XTest extension functions
- XTextWidth (3)
- compute text width
- XTextWidth16 (3)
- compute text width
- XtFindFile (3)
- search for a file using substitutions in the path list
- XtGetDisplays (3)
- retrieve a list of displays associated with an applica...
- XtGetGC (3)
- obtain and destroy a sharable GC
- XtGetKeyboardFocusWidget (3)
- extension event handling
- XtGetSelectionRequest (3)
- retrieve the event that triggered the XtConvertSe...
- XtHasCallbacks (3)
- process callbacks
- XtHooksOfDisplay (3)
- external agent access points
- XTimeCoord (3)
- send events and pointer motion history structure
- XtInsertEventHandler (3)
- add and remove event handlers
- XtInsertEventTypeHandler (3)
- extension event handling
- XtInsertRawEventHandler (3)
- add and remove event handlers
- XtIsApplicationShell (3)
- obtain and verify a widget's class
- XtIsManaged (3)
- manage and unmanage children
- XtIsOverrideShell (3)
- obtain and verify a widget's class
- XtIsSensitive (3)
- set and check a widget's sensitivity state
- XtIsSessionShell (3)
- obtain and verify a widget's class
- XtIsShell (3)
- obtain and verify a widget's class
- XtIsTopLevelShell (3)
- obtain and verify a widget's class
- XtIsTransientShell (3)
- obtain and verify a widget's class
- XtIsVendorShell (3)
- obtain and verify a widget's class
- XtIsWMShell (3)
- obtain and verify a widget's class
- XtManageChild (3)
- manage and unmanage children
- XtManageChildren (3)
- manage and unmanage children
- XtNumber (3)
- determine the byte offset or number of array elements
- XtOffset (3)
- determine the byte offset or number of array elements
- XtOffsetOf (3)
- determine the byte offset or number of array elements
- XtQueryGeometry (3)
- query the preferred geometry of a child widget
- xtrapchar (1x)
- XTrap sample clients
- XtRegisterDrawable (3)
- register a drawable with the Intrinsics event dispat...
- XtRegisterExtensionSelector (3)
- extension event handling
- XtReleaseGC (3)
- obtain and destroy a sharable GC
- XtReleasePropertyAtom (3)
- maintain a cache of property atoms
- XtRemoveActionHook (3)
- register an action hook procedure
- XtRemoveBlockHook (3)
- register a block hook procedure
- XtRemoveEventHandler (3)
- add and remove event handlers
- XtRemoveEventTypeHandler (3)
- extension event handling
- XtRemoveRawEventHandler (3)
- add and remove event handlers
- XtReservePropertyAtom (3)
- maintain a cache of property atoms
- XtResolvePathname (3)
- search for a file using standard substitution
- XtSessionGetToken (3)
- token management for checkpointing
- XtSessionReturnToken (3)
- token management for checkpointing
- XtSetErrorHandler (3)
- low-level error handlers
- XtSetErrorMsgHandler (3)
- high-level error handlers
- XtSetEventDispatcher (3)
- extension event handling
- XtSetKeyboardFocus (3)
- focus events on a child widget
- XtSetLanguageProc (3)
- set the language procedure
- XtSetMappedWhenManaged (3)
- map and unmap widgets
- XtSetSensitive (3)
- set and check a widget's sensitivity state
- XtSetWarningHandler (3)
- low-level error handlers
- XtSetWarningMsgHandler (3)
- high-level error handlers
- XtSetWMColormapWindows (3)
- Set the value of the WM_COLORMAP_WINDOWS property
- XtToolkitThreadInitialize (3)
- initialize the toolkit for multiple threads
- XtUnmanageChild (3)
- manage and unmanage children
- XtUnmanageChildren (3)
- manage and unmanage children
- XtUnregisterDrawable (3)
- register a drawable with the Intrinsics event disp...
- XtVaAppCreateShell (3)
- create top-level widget instance
- XtVaCreatePopupShell (3)
- create a popup shell
- XtWarning (3)
- low-level error handlers
- XtWarningMsg (3)
- high-level error handlers
- XUngrabDevice (3)
- grab/release the specified extension device
- XUngrabKeyboard (3)
- grab the keyboard
- XUngrabPointer (3)
- grab the pointer
- XUngrabServer (3)
- grab the server
- XUnionRectWithRegion (3)
- region arithmetic
- XUnionRegion (3)
- region arithmetic
- XUnlockDisplay (3)
- multi-threading support
- XUnregisterIMInstantiateCallback (3)
- open, close, and obtain input method i...
- Xutf8LookupString (3)
- obtain composed input from an input method
- Xutf8ResetIC (3)
- reset the state of an input context
- Xutf8TextEscapement (3)
- obtain the escapement of text
- Xutf8TextPerCharExtents (3)
- obtain per-character information for a text string
- xv (1x)
- interactive image display for the X Window System
- xvminitoppm (1)
- convert an XV 'thumbnail' picture to PPM
- Xvnc (1)
- the X VNC server
- xvpictoppm (1x)
- converts XV 'thumbnail' files to standard PPM format
- XvPortNotify (3)
- event generated when port attributes change
- XvQueryBestSize (3)
- determine the optimum drawable region size
- XvShmCreateImage (3)
- create an XvImage
- XvShmPutImage (3)
- display an XvImage
- XwcLookupString (3)
- obtain composed input from an input method
- XwcResetIC (3)
- reset the state of an input context
- XwcTextEscapement (3)
- obtain the escapement of text
- XwcTextPerCharExtents (3)
- obtain per-character information for a text string
- XWindowChanges (3)
- configure windows and window changes structure
- XWithdrawWindow (3)
- manipulate top-level windows
- XWMHints (3)
- allocate window manager hints structure and set or rea...
- xxd (1)
- make a hexdump or do the reverse.
- XXorRegion (3)
- region arithmetic
- xzegrep (1)
- search compressed files for a regular expression
- xzfgrep (1)
- search compressed files for a regular expression
- xzgrep (1)
- search compressed files for a regular expression
- y0 (3)
- Bessel functions of the second kind
- y0 (3p)
- Bessel functions of the second kind
- y0f (3)
- Bessel functions of the second kind
- y0l (3)
- Bessel functions of the second kind
- y1 (3)
- Bessel functions of the second kind
- y1f (3)
- Bessel functions of the second kind
- y1l (3)
- Bessel functions of the second kind
- y4munsharp (1)
- Unsharp filter for YUV4MPEG2 streams
- yabasic (1)
- Yet Another Basic
- yacc (1p)
- yet another compiler compiler (DEVELOPMENT)
- yapp (1)
- A perl frontend to the Parse::Yapp module
- yasm (1)
- The Yasm Modular Assembler
- yasm_arch (7)
- Yasm Supported Target Architectures
- ycp (3pm)
- a Perl module for parsing and writing the YaST2 Commun...
- yield (9)
- yield the current processor to other threads.
- yield_to (9)
- yield the current processor to another thread in your ...
- yn (3)
- Bessel functions of the second kind
- ynf (3)
- Bessel functions of the second kind
- ynl (3)
- Bessel functions of the second kind
- ypchfn (1)
- change your password in the NIS database
- ypchsh (1)
- change your password in the NIS database
- ypmatch (1)
- print the values of one or more keys from a NIS map
- yppasswd (1)
- change your password in the NIS database
- ypwhich (1)
- return name of NIS server or map master
- yuvinactive (1)
- Set a part of the video to a defined state
- yuvmedianfilter (1)
- A filter for yuv images produced by the mjpeg tools
- zap_vma_ptes (9)
- remove ptes mapping the vma
- zebra (8)
- a routing manager for use with associated Quagga compo...
- zeitgeist-datahub (1)
- passive loggers for Zeitgeist
- zgrep (1)
- search possibly compressed files for a regular expression
- zip (1)
- package and compress (archive) files
- zip_add (3)
- add file to zip archive or replace file in zip archive
- zip_add_dir (3)
- add directory to zip archive
- zip_close (3)
- close zip archive
- zip_delete (3)
- delete file from zip archive
- zip_dir_add (3)
- add directory to zip archive
- zip_discard (3)
- close zip archive and discard changes
- zip_error_clear (3)
- clear error state for archive or file
- zip_error_get (3)
- get error codes for archive or file
- zip_fclose (3)
- close file in zip archive
- zip_fdopen (3)
- open zip archive using open file descriptor
- zip_file_add (3)
- add file to zip archive or replace file in zip archive
- zip_file_error_clear (3)
- clear error state for archive or file
- zip_file_error_get (3)
- get error codes for archive or file
- zip_file_rename (3)
- rename file in zip archive
- zip_file_replace (3)
- add file to zip archive or replace file in zip archive
- zip_fopen (3)
- open file in zip archive for reading
- zip_fopen_encrypted (3)
- open encrypted file in zip archive for reading
- zip_fopen_index (3)
- open file in zip archive for reading
- zip_fopen_index_encrypted (3)
- open encrypted file in zip archive for reading
- zip_get_archive_comment (3)
- get zip archive comment
- zip_get_archive_flag (3)
- get status flags for zip
- zip_get_num_entries (3)
- get number of files in archive
- zip_get_num_files (3)
- get number of files in archive
- zip_open (3)
- open zip archive
- zip_rename (3)
- rename file in zip archive
- zip_replace (3)
- add file to zip archive or replace file in zip archive
- zip_set_archive_comment (3)
- set zip archive comment
- zip_set_archive_flag (3)
- set zip archive flag
- zip_set_file_compression (3)
- set compression method for file in zip
- zip_unchange (3)
- undo changes to file in zip archive
- zip_unchange_all (3)
- undo all changes in a zip archive
- zip_unchange_archive (3)
- undo global changes to zip archive
- zipdetails (1)
- display the internal structure of zip files
- zipgrep (1)
- search files in a ZIP archive for lines matching a pat...
- zipinfo (1)
- list detailed information about a ZIP archive
- zipnote (1)
- write the comments in zipfile to stdout, edit comments...
- zoo (1)
- manipulate archives of files in compressed form
- zsh (1)
- the Z shell
- zshall (1)
- the Z shell meta-man page
- zshbuiltins (1)
- zsh built-in commands
- zshcalsys (1)
- zsh calendar system
- zshcompctl (1)
- zsh programmable completion
- zshcompsys (1)
- zsh completion system
- zshcompwid (1)
- zsh completion widgets
- zshcontrib (1)
- user contributions to zsh
- zshexpn (1)
- zsh expansion and substitution
- zshmisc (1)
- everything and then some
- zshmodules (1)
- zsh loadable modules
- zshoptions (1)
- zsh options
- zshparam (1)
- zsh parameters
- zshroadmap (1)
- informal introduction to the zsh manual The Zsh Manual...
- zshtcpsys (1)
- zsh tcp system
- zshzftpsys (1)
- zftp function front-end
- zshzle (1)
- zsh command line editor
- zstdgrep (1)
- print lines matching a pattern in zstandard-compressed...
- zypp-CheckAccessDeleted (1)
- List processes which access deleted files
- zypp-refresh (8)
- Autorefresh metadata of all enabled repositories
- BitchX (1)
- The Ultimate IRC Client
- isympy (1)
- interactive shell for SymPy
- nethack4 (6)
- dungeon exploration game
- nethack4-sdl (6)
- dungeon exploration game
- telnet (1)
- user interface to the TELNET protocol with TLS support
- telnet-tls (1)
- user interface to the TELNET protocol with TLS support
- tn5250 (1)
- an implementation of the 5250 telnet protocol
home | help