OpenSuSE Man Pages
home |
help
- DateTime::Locale::pcm (3)
- Locale data examples for the Nigerian Pidgin (pcm...
- DateTime::Locale::pcm (3pm)
- Locale data examples for the Nigerian Pidgin (p...
- DateTime::Locale::pcm_NG (3)
- Locale data examples for the Nigerian Pidgin N...
- DateTime::Locale::pcm_NG (3pm)
- Locale data examples for the Nigerian Pidgin...
- IPC::Run3 (3)
- run a subprocess with input/ouput redirection
- IPC::Run3 (3pm)
- run a subprocess with input/ouput redirection
- IPC::Run3::ProfArrayBuffer (3)
- Store profile events in RAM in an array
- IPC::Run3::ProfArrayBuffer (3pm)
- Store profile events in RAM in an array
- IPC::Run3::ProfLogReader (3)
- read and process a ProfLogger file
- IPC::Run3::ProfLogReader (3pm)
- read and process a ProfLogger file
- IPC::Run3::ProfLogger (3)
- write profiling data to a log file
- IPC::Run3::ProfLogger (3pm)
- write profiling data to a log file
- IPC::Run3::ProfPP (3)
- Generate reports from IPC::Run3 profiling data
- IPC::Run3::ProfPP (3pm)
- Generate reports from IPC::Run3 profiling data
- IPC::Run3::ProfReporter (3)
- base class for handling profiling data
- IPC::Run3::ProfReporter (3pm)
- base class for handling profiling data
- IPC::System::Simple (3)
- Run commands simply, with detailed diagnostics
- IPC::System::Simple (3pm)
- Run commands simply, with detailed diagnostics
- Mail::IMAPClient (3)
- An IMAP Client API
- Mail::IMAPClient (3pm)
- An IMAP Client API
- Mail::IMAPClient::BodyStructure (3)
- parse fetched results
- Mail::IMAPClient::BodyStructure (3pm)
- parse fetched results
- Mail::IMAPClient::BodyStructure::Parse (3)
- used internally by Mail::IMAPCli...
- Mail::IMAPClient::BodyStructure::Parse (3pm)
- used internally by Mail::IMAPC...
- Mail::IMAPClient::MessageSet (3)
- ranges of message sequence numbers
- Mail::IMAPClient::MessageSet (3pm)
- ranges of message sequence numbers
- Mail::IMAPClient::Thread (3)
- used internally by Mail::IMAPClient->thread
- Mail::IMAPClient::Thread (3pm)
- used internally by Mail::IMAPClient->thread
- Net::IMAP::Simple::PipeSocket (3)
- a little wrapper around IPC-Open3 that fe...
- Net::IMAP::Simple::PipeSocket (3pm)
- a little wrapper around IPC-Open3 that ...
- pcmanfm (1)
- A lightweight Gtk+ based file manager for X Window.
- pcre2unicode (3)
- Perl-compatible regular expressions (revised API)
- pcre2_config (3)
- Perl-compatible regular expressions (revised API)
- Test2::IPC (3)
- Turn on IPC for threading or forking support.
- Test2::IPC (3pm)
- Turn on IPC for threading or forking support.
- Test2::IPC::Driver (3)
- Base class for Test2 IPC drivers.
- Test2::IPC::Driver (3pm)
- Base class for Test2 IPC drivers.
- Test2::IPC::Driver::Files (3)
- Temp dir + Files concurrency model.
- Test2::IPC::Driver::Files (3pm)
- Temp dir + Files concurrency model.
- Test2::Manual::Anatomy::IPC (3)
- Manual for the IPC system.
- Test2::Manual::Anatomy::IPC (3pm)
- Manual for the IPC system.
- __audit_ipc_obj (9)
- record audit data for ipc object
- __audit_ipc_set_perm (9)
- record audit data for new ipc permissions
- __pci_complete_power_transition (9)
- Complete power transition of a PCI device
- __pci_enable_wake (9)
- enable PCI device as wakeup event source
- __pci_hp_register (9)
- register a hotplug_slot with the PCI hotplug subsystem
- __pci_register_driver (9)
- register a new pci driver
- __pci_reset_function (9)
- reset a PCI device function
- __pci_reset_function_locked (9)
- reset a PCI device function while holding t...
- __pmAddIPC (3)
- IPC version infrastructure support
- __pmFdLookupIPC (3)
- IPC version infrastructure support
- __pmLookupIPC (3)
- IPC version infrastructure support
- __pmOverrideLastFd (3)
- IPC version infrastructure support
- __pmPrintIPC (3)
- IPC version infrastructure support
- __pmResetIPC (3)
- IPC version infrastructure support
- Alien::Build::Plugin::PkgConfig::Make... (3)
- Convert .pc files into static
- alsaloop (1)
- command-line PCM loopback
- Apache::RPC::Server (3pm)
- A subclass of RPC::XML::Server tuned for mod_perl
- Apache::RPC::Status (3pm)
- A status monitor similar to Apache::Status for RPC
- ata_pci_remove_one (9)
- PCI layer callback for device removal
- atapi_cmd_type (9)
- Determine ATAPI command type from SCSI opcode
- rpc_soc (3t)
- "library routines for remote procedure calls"
- rpc_clnt_auth (3t)
- library routines for client side remote procedure call...
- bdftopcf (1)
- convert X font from Bitmap Distribution Format to Port...
- bio_add_pc_page (9)
- attempt to add page to bio
- blk_rq_map_kern (9)
- map kernel data to a request, for REQ_TYPE_BLOCK_PC usage
- blk_rq_map_user (9)
- map user data to a request, for REQ_TYPE_BLOCK_PC usage
- blk_rq_map_user_iov (9)
- map user data to a request, for REQ_TYPE_BLOCK_PC u...
- blk_rq_set_block_pc (9)
- initialize a requeest to type BLOCK_PC
- build_ipcc.pl (1)
- Build database for IP::Country::DB_File
- Bundle::PlRPC (3pm)
- A bundle to install PlRPC-Server, Client and prerequis...
- callrpc (3)
- library routines for remote procedure calls
- cert2spc (1)
- Transform multiple X.509 certificates to a Software Pu...
- cifs.upcall (8)
- Userspace upcall helper for Common Internet File Syste...
- rpc_clnt_create (3t)
- "library routines for dealing with creation and manipu...
- clnt_pcreateerror (3)
- library routines for remote procedure calls
- clnt_spcreateerror (3)
- library routines for remote procedure calls
- cpclean (1)
- Remove wrong control points by statistical methods
- CURLINFO_APPCONNECT_TIME (3)
- get the time until the SSL/SSH handshake is co...
- CURLINFO_APPCONNECT_TIME_T (3)
- time until the SSL/SSH handshake completed
- DateTime::Locale::apc_SY (3)
- Locale data examples for the Syria (apc-SY) lo...
- DES_pcbc_encrypt (3osslssl-3)
- DES encryption
- dhcpcd (8)
- an RFC 2131 compliant DHCP client
- drm_dp_dpcd_read (9)
- read a series of bytes from the DPCD
- drm_dp_dpcd_read_link_status (9)
- read DPCD link status (bytes 0x202-0x207)
- drm_dp_dpcd_readb (9)
- read a single byte from the DPCD
- drm_dp_dpcd_write (9)
- write a series of bytes to the DPCD
- drm_dp_dpcd_writeb (9)
- write a single byte to the DPCD
- drm_get_pci_dev (9)
- Register a PCI device with the DRM subsystem
- drm_pci_alloc (9)
- Allocate a PCI consistent memory block, for DMA.
- drm_pci_exit (9)
- Unregister matching PCI devices from the DRM subsystem
- drm_pci_free (9)
- Free a PCI consistent memory block
- drm_pci_init (9)
- Register matching PCI devices with the DRM subsystem
- dumpcap (1)
- Dump network traffic
- dvihp (1)
- convert a TeX DVI file to Hewlett-Packard PCL
- dvilj (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvilj2p (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvilj4 (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvilj4l (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- dvilj6 (1)
- convert a TeX DVI file to PCL, for HP LaserJet printers
- edd_get_pci_dev (9)
- finds pci_dev that matches edev
- endrpcent (3)
- get RPC entry
- getrpcent (3t)
- get RPC entry
- fpclassify (3)
- floating-point classification macros
- fpclassify (3p)
- classify real floating type
- ftok (3p)
- generate an IPC key
- getrpcbyname (3)
- get RPC entry
- getrpcbyname_r (3)
- get RPC entry (reentrant)
- getrpcbynumber (3)
- get RPC entry
- getrpcbynumber_r (3)
- get RPC entry (reentrant)
- getrpcent (3)
- get RPC entry
- getrpcent_r (3)
- get RPC entry (reentrant)
- getrpcport (3)
- get RPC port number
- getrpcport (3t)
- get RPC port number
- glPopClientAttrib (3gl)
- push and pop the client attribute stack
- glutBitmapCharacter (3)
- renders a bitmap character using OpenGL.
- gnutls_pcert_deinit (3)
- API function
- gnutls_pcert_export_openpgp (3)
- API function
- gnutls_pcert_export_x509 (3)
- API function
- gnutls_pcert_import_openpgp (3)
- API function
- gnutls_pcert_import_openpgp_raw (3)
- API function
- gnutls_pcert_import_rawpk (3)
- API function
- gnutls_pcert_import_rawpk_raw (3)
- API function
- gnutls_pcert_import_x509 (3)
- API function
- gnutls_pcert_import_x509_list (3)
- API function
- gnutls_pcert_import_x509_raw (3)
- API function
- gnutls_pcert_list_import_x509_file (3)
- API function
- gnutls_pcert_list_import_x509_raw (3)
- API function
- gpart (8)
- guess PC-type hard disk partitions
- grpck (8)
- verify integrity of group files
- gssd (8)
- RPCSEC_GSS daemon
- hpcdtoppm (1)
- convert a Photo-CD image into a PBM image
- httpcfg (1)
- Mono Certificate Management for HttpListener
- i2o_pci_alloc (9)
- Allocate DMA memory, map IO memory for I2O controller
- i2o_pci_exit (9)
- unregisters I2O PCI driver from PCI subsystem
- i2o_pci_free (9)
- Frees the DMA memory for the I2O controller
- i2o_pci_init (9)
- registers I2O PCI driver in PCI subsystem
- i2o_pci_interrupt (9)
- Interrupt handler for I2O controller
- i2o_pci_irq_disable (9)
- Free interrupt for I2O controller
- i2o_pci_irq_enable (9)
- Allocate interrupt for I2O controller
- i2o_pci_probe (9)
- Probe the PCI device for an I2O controller
- i2o_pci_remove (9)
- Removes a I2O controller from the system
- Image::ExifTool::MPC (3pm)
- Read Musepack audio meta information
- Image::ExifTool::PhotoCD (3pm)
- Read Kodak Photo CD Image Pac (PCD) metadata
- img-pcx (n)
- Img, Paintbrush Format (pcx)
- ipc (2)
- System V IPC system calls
- ipc (5)
- System V interprocess communication mechanisms
- ipc64_perm_to_ipc_perm (9)
- convert new ipc permissions to old
- IPC::Cmd (3)
- finding and running system commands made easy
- IPC::Msg (3)
- SysV Msg IPC object class
- IPC::Open2 (3)
- open a process for both reading and writing using open2()
- IPC::Open3 (3)
- open a process for reading, writing, and error handlin...
- IPC::Semaphore (3)
- SysV Semaphore IPC object class
- IPC::SharedMem (3)
- SysV Shared Memory IPC object class
- IPC::SysV (3)
- System V IPC constants and system calls
- ipc_addid (9)
- add an ipc identifier
- ipc_alloc (9)
- allocate ipc space
- ipc_check_perms (9)
- check security and permissions for an ipc object
- ipc_findkey (9)
- find a key in an ipc identifier set
- ipc_free (9)
- free ipc space
- ipc_get_maxid (9)
- get the last assigned id
- ipc_init (9)
- initialise ipc subsystem
- ipc_init_ids (9)
- initialise ipc identifiers
- ipc_init_proc_interface (9)
- create a proc interface for sysipc types using ...
- ipc_lock (9)
- lock an ipc structure without rwsem held
- ipc_obtain_object (9)
- (unknown subject)
- ipc_obtain_object_check (9)
- (unknown subject)
- ipc_parse_version (9)
- ipc call version
- ipc_rcu_alloc (9)
- allocate ipc and rcu space
- ipc_rmid (9)
- remove an ipc identifier
- ipc_update_perm (9)
- update the permissions of an ipc object
- ipcalc (1)
- Perform simple operations on IP addresses and networks
- ipcctl_pre_down_nolock (9)
- retrieve an ipc and check permissions for some I...
- ipcget (9)
- Common sys_*get code
- ipcget_new (9)
- create a new ipc object
- ipcget_public (9)
- get an ipc object or create a new one
- ipcmk (1)
- make various IPC resources
- ipcperms (9)
- check ipc permissions
- ipcrm (1)
- remove certain IPC resources
- ipcrm (1p)
- remove an XSI message queue, semaphore set, or shared ...
- ipcs (1)
- show information on IPC facilities
- ipcs (1p)
- report XSI interprocess communication facilities status
- ippevepcl (7)
- pcl and postscript print commands for ippeveprinter
- ippeveps (7)
- pcl and postscript print commands for ippeveprinter
- kernel_to_ipc64_perm (9)
- convert kernel ipc permissions to user
- key.dns_resolver (8)
- Upcall for request-key to handle dns_resolver keys
- key_decryptsession (3)
- interfaces to rpc keyserver daemon
- key_encryptsession (3)
- interfaces to rpc keyserver daemon
- key_gendes (3)
- interfaces to rpc keyserver daemon
- key_secretkey_is_set (3)
- interfaces to rpc keyserver daemon
- key_setsecret (3)
- interfaces to rpc keyserver daemon
- kgdb_arch_set_pc (9)
- Generic call back to the program counter
- ldapcompare (1)
- LDAP compare tool
- libwww::lwpcook (3pm)
- The libwww-perl cookbook
- log2pcap (1)
- Extract network traces from Samba log files
- lpc (8)
- line printer control program (deprecated)
- lspci (8)
- list all PCI devices
- lwpcook (3)
- The libwww-perl cookbook
- lwpcook (3pm)
- The libwww-perl cookbook
- make_method (1)
- Turn Perl code into an XML description for RPC::XML::S...
- mempcpy (3)
- copy memory area
- mkzimage_cmdline (8)
- edit the built-in kernel cmdline in a PowerPC CHRP zImage
- mpt_attach (9)
- Install a PCI intelligent MPT adapter.
- mpt_detach (9)
- Remove a PCI intelligent MPT adapter.
- mpt_detect_bound_ports (9)
- Search for matching PCI bus/dev_function
- nfsidmap (8)
- The NFS idmapper upcall program
- oggdec (1)
- simple decoder, Ogg Vorbis file to PCM audio file (Wav...
- Opcode (3)
- Disable named opcodes when compiling perl code
- pbmupc (1)
- create a Universal Product Code PBM image
- PC (3ncurses)
- direct curses interface to the terminfo capability dat...
- pc1toppm (1)
- convert an Atari Degas .pc1 into a PPM image
- pcap (3pcap)
- Packet Capture library
- pcap-config (1)
- write libpcap compiler and linker flags to standard ou...
- pcap-filter (7)
- packet filter syntax
- pcap-linktype (7)
- link-layer header types supported by libpcap
- pcap-savefile (5)
- libpcap savefile format
- pcap-tstamp (7)
- packet time stamps in libpcap
- pcap_activate (3pcap)
- activate a capture handle
- pcap_breakloop (3pcap)
- force a pcap_dispatch() or pcap_loop() call to return
- pcap_can_set_rfmon (3pcap)
- check whether monitor mode can be set for a not-...
- pcap_close (3pcap)
- close a capture device or savefile
- pcap_compile (3pcap)
- compile a filter expression
- pcap_create (3pcap)
- create a live capture handle
- pcap_datalink (3pcap)
- get the link-layer header type
- pcap_datalink_name_to_val (3pcap)
- get the link-layer header type value corr...
- pcap_datalink_val_to_description (3pcap)
- get a name or description for a li...
- pcap_datalink_val_to_description_or_dlt (3pcap)
- get a name or description f...
- pcap_datalink_val_to_name (3pcap)
- get a name or description for a link-laye...
- pcap_dispatch (3pcap)
- process packets from a live capture or savefile
- pcap_dump (3pcap)
- write a packet to a capture file
- pcap_dump_close (3pcap)
- close a savefile being written to
- pcap_dump_file (3pcap)
- get the standard I/O stream for a savefile being wri...
- pcap_dump_flush (3pcap)
- flush to a savefile packets dumped
- pcap_dump_fopen (3pcap)
- open a file to which to write packets
- pcap_dump_ftell (3pcap)
- get the current file offset for a savefile being wr...
- pcap_dump_open (3pcap)
- open a file to which to write packets
- pcap_file (3pcap)
- get the standard I/O stream for a savefile being read
- pcap_fileno (3pcap)
- get the file descriptor for a live capture
- pcap_findalldevs (3pcap)
- get a list of capture devices, and free that list
- pcap_fopen_offline (3pcap)
- open a saved capture file for reading
- pcap_fopen_offline_with_tstamp_precision (3pcap)
- open a saved capture file ...
- pcap_free_datalinks (3pcap)
- get a list of link-layer header types supported...
- pcap_free_tstamp_types (3pcap)
- get a list of time stamp types supported by ...
- pcap_freealldevs (3pcap)
- get a list of capture devices, and free that list
- pcap_freecode (3pcap)
- free a BPF program
- pcap_get_required_select_timeout (3pcap)
- get a timeout to be used when doin...
- pcap_get_selectable_fd (3pcap)
- get a file descriptor on which a select() ca...
- pcap_get_tstamp_precision (3pcap)
- get the time stamp precision returned in ...
- pcap_geterr (3pcap)
- get or print libpcap error message text
- pcap_getnonblock (3pcap)
- set or get the state of non-blocking mode on a cap...
- pcap_init (3pcap)
- initialize the library
- pcap_inject (3pcap)
- transmit a packet
- pcap_is_swapped (3pcap)
- find out whether a savefile has the native byte order
- pcap_lib_version (3pcap)
- get the version information for libpcap
- pcap_list_datalinks (3pcap)
- get a list of link-layer header types supported...
- pcap_list_tstamp_types (3pcap)
- get a list of time stamp types supported by ...
- pcap_lookupdev (3pcap)
- find the default device on which to capture
- pcap_lookupnet (3pcap)
- find the IPv4 network number and netmask for a device
- pcap_loop (3pcap)
- process packets from a live capture or savefile
- pcap_major_version (3pcap)
- get the version number of a savefile
- pcap_minor_version (3pcap)
- get the version number of a savefile
- pcap_next (3pcap)
- read the next packet from a pcap_t
- pcap_next_ex (3pcap)
- read the next packet from a pcap_t
- pcap_offline_filter (3pcap)
- check whether a filter matches a packet
- pcap_open_dead (3pcap)
- open a fake pcap_t for compiling filters or opening ...
- pcap_open_dead_with_tstamp_precision (3pcap)
- open a fake pcap_t for compili...
- pcap_open_live (3pcap)
- open a device for capturing
- pcap_open_offline (3pcap)
- open a saved capture file for reading
- pcap_open_offline_with_tstamp_precision (3pcap)
- open a saved capture file f...
- pcap_perror (3pcap)
- get or print libpcap error message text
- pcap_sendpacket (3pcap)
- transmit a packet
- pcap_set_buffer_size (3pcap)
- set the buffer size for a not-yet-activated ca...
- pcap_set_datalink (3pcap)
- set the link-layer header type to be used by a ca...
- pcap_set_immediate_mode (3pcap)
- set immediate mode for a not-yet-activated ...
- pcap_set_promisc (3pcap)
- set promiscuous mode for a not-yet-activated captu...
- pcap_set_protocol_linux (3pcap)
- set capture protocol for a not-yet-activate...
- pcap_set_rfmon (3pcap)
- set monitor mode for a not-yet-activated capture handle
- pcap_set_snaplen (3pcap)
- set the snapshot length for a not-yet-activated ca...
- pcap_set_timeout (3pcap)
- set the packet buffer timeout for a not-yet-activa...
- pcap_set_tstamp_precision (3pcap)
- set the time stamp precision returned in ...
- pcap_set_tstamp_type (3pcap)
- set the time stamp type to be used by a captur...
- pcap_setdirection (3pcap)
- set the direction for which packets will be captured
- pcap_setfilter (3pcap)
- set the filter
- pcap_setnonblock (3pcap)
- set or get the state of non-blocking mode on a cap...
- pcap_snapshot (3pcap)
- get the snapshot length
- pcap_stats (3pcap)
- get capture statistics
- pcap_statustostr (3pcap)
- convert a PCAP_ERROR_ or PCAP_WARNING_ value to a ...
- pcap_strerror (3pcap)
- convert an errno value to a string
- pcap_tstamp_type_name_to_val (3pcap)
- get the time stamp type value correspo...
- pcap_tstamp_type_val_to_description (3pcap)
- get a name or description for a...
- pcap_tstamp_type_val_to_name (3pcap)
- get a name or description for a time s...
- pcdovtoppm (1)
- create index image for a photo CD
- pcf2vpnc (1)
- converts VPN-config files from pcf to vpnc-format
- pci_add_dynid (9)
- add a new PCI device ID to this driver and re-probe de...
- pci_adjust_legacy_attr (9)
- adjustment of legacy file attributes
- pci_back_from_sleep (9)
- turn PCI device on during system-wide transition in...
- pci_bus_add_device (9)
- start driver for a single device
- pci_bus_add_devices (9)
- start driver for PCI devices
- pci_bus_alloc_resource (9)
- allocate a resource from a parent bus
- pci_bus_find_capability (9)
- query for devices' capabilities
- pci_bus_max_busnr (9)
- returns maximum PCI bus number of given bus' children
- pci_bus_set_ops (9)
- Set raw operations of pci bus
- pci_cfg_access_lock (9)
- Lock PCI config reads/writes
- pci_cfg_access_trylock (9)
- try to lock PCI config reads/writes
- pci_cfg_access_unlock (9)
- Unlock PCI config reads/writes
- pci_check_and_mask_intx (9)
- mask INTx on pending interrupt
- pci_check_and_unmask_intx (9)
- unmask INTx if no interrupt is pending
- pci_choose_state (9)
- Choose the power state of a PCI device
- pci_clear_master (9)
- disables bus-mastering for device dev
- pci_clear_mwi (9)
- disables Memory-Write-Invalidate for device dev
- pci_create_legacy_files (9)
- create legacy I/O port and memory files
- pci_create_resource_files (9)
- create resource files in sysfs for dev
- pci_create_slot (9)
- create or increment refcount for physical PCI slot
- pci_destroy_slot (9)
- decrement refcount for physical PCI slot
- pci_dev_driver (9)
- get the pci_driver of a device
- pci_dev_get (9)
- increments the reference count of the pci device struc...
- pci_dev_present (9)
- Returns 1 if device matching the device list is presen...
- pci_dev_put (9)
- release a use of the pci device structure
- pci_dev_run_wake (9)
- Check if device can generate run-time wake-up events.
- pci_disable_device (9)
- Disable PCI device after use
- pci_disable_rom (9)
- disable ROM decoding for a PCI device
- pci_disable_sriov (9)
- disable the SR-IOV capability
- pci_enable_device (9)
- Initialize device before it's used by a driver.
- pci_enable_device_io (9)
- Initialize a device for use with IO space
- pci_enable_device_mem (9)
- Initialize a device for use with Memory space
- pci_enable_msi_range (9)
- configure device's MSI capability structure
- pci_enable_msix (9)
- configure device's MSI-X capability structure
- pci_enable_msix_range (9)
- configure device's MSI-X capability structure
- pci_enable_rom (9)
- enable ROM decoding for a PCI device
- pci_enable_sriov (9)
- enable the SR-IOV capability
- pci_find_bus (9)
- locate PCI bus from a given domain and bus number
- pci_find_capability (9)
- query for devices' capabilities
- pci_find_ext_capability (9)
- Find an extended capability
- pci_find_ht_capability (9)
- query a device's Hypertransport capabilities
- pci_find_next_bus (9)
- begin or continue searching for a PCI bus
- pci_find_next_ext_capability (9)
- Find an extended capability
- pci_find_next_ht_capability (9)
- query a device's Hypertransport capabilities
- pci_find_parent_resource (9)
- return resource region of parent bus of given ...
- pci_get_class (9)
- begin or continue searching for a PCI device by class
- pci_get_device (9)
- begin or continue searching for a PCI device by vendor...
- pci_get_domain_bus_and_slot (9)
- locate PCI device for a given PCI domain (s...
- pci_get_slot (9)
- locate PCI device for a given PCI slot
- pci_get_subsys (9)
- begin or continue searching for a PCI device by vendor...
- pci_hp_change_slot_info (9)
- changes the slot's information structure in the...
- pci_hp_create_module_link (9)
- create symbolic link to the hotplug driver mo...
- pci_hp_deregister (9)
- deregister a hotplug_slot with the PCI hotplug subsystem
- pci_hp_remove_module_link (9)
- remove symbolic link to the hotplug driver mo...
- pci_intx (9)
- enables/disables PCI INTx for device dev
- pci_intx_mask_supported (9)
- probe for INTx masking support
- pci_iomap (9)
- create a virtual mapping cookie for a PCI BAR
- pci_load_and_free_saved_state (9)
- Reload the save state pointed to by state...
- pci_lost_interrupt (9)
- reports a lost PCI interrupt
- pci_map_rom (9)
- map a PCI ROM to kernel space
- pci_match_id (9)
- See if a pci device matches a given pci_id table
- pci_mmap_legacy_io (9)
- map legacy PCI IO into user memory space
- pci_mmap_legacy_mem (9)
- map legacy PCI memory into user memory space
- pci_mmap_resource (9)
- map a PCI resource into user memory space
- pci_msi_enabled (9)
- is MSI enabled?
- pci_msi_off (9)
- disables any MSI or MSI-X capabilities
- pci_msi_vec_count (9)
- Return the number of MSI vectors a device can send
- pci_msix_vec_count (9)
- return the number of device's MSI-X table entries
- pci_num_vf (9)
- return number of VFs associated with a PF device_relea...
- pci_platform_rom (9)
- provides a pointer to any ROM image provided by the pl...
- pci_pme_active (9)
- enable or disable PCI device's PME# function
- pci_pme_capable (9)
- check the capability of PCI device to generate PME#
- pci_prepare_to_sleep (9)
- prepare PCI device for system-wide transition into...
- pci_probe_reset_bus (9)
- probe whether a PCI bus can be reset
- pci_probe_reset_slot (9)
- probe whether a PCI slot can be reset
- pci_read_legacy_io (9)
- read byte(s) from legacy I/O port space
- pci_read_rom (9)
- read a PCI ROM
- pci_read_vpd (9)
- Read one entry from Vital Product Data
- pci_reenable_device (9)
- Resume abandoned device
- pci_release_region (9)
- Release a PCI bar
- pci_release_regions (9)
- Release reserved PCI I/O and memory resources
- pci_release_selected_regions (9)
- Release selected PCI I/O and memory resources
- pci_remove_resource_files (9)
- cleanup resource files
- pci_remove_sysfs_dev_files (9)
- cleanup PCI specific sysfs files
- pci_request_region (9)
- Reserve PCI I/O and memory resource
- pci_request_region_exclusive (9)
- Reserved PCI I/O and memory resource
- pci_request_regions (9)
- Reserved PCI I/O and memory resources
- pci_request_regions_exclusive (9)
- Reserved PCI I/O and memory resources
- pci_request_selected_regions (9)
- Reserve selected PCI I/O and memory resources
- pci_rescan_bus (9)
- scan a PCI bus for devices.
- pci_reset_bridge_secondary_bus (9)
- Reset the secondary bus on a PCI bridge.
- pci_reset_bus (9)
- reset a PCI bus
- pci_reset_function (9)
- quiesce and reset a PCI device function
- pci_reset_slot (9)
- reset a PCI slot
- pci_restore_state (9)
- Restore the saved state of a PCI device
- pci_save_state (9)
- save the PCI configuration space of a device before su...
- pci_scan_slot (9)
- scan a PCI slot on a bus for devices.
- pci_select_bars (9)
- Make BAR mask from the type of resource
- pci_set_cacheline_size (9)
- ensure the CACHE_LINE_SIZE register is programmed
- pci_set_master (9)
- enables bus-mastering for device dev
- pci_set_mwi (9)
- enables memory-write-invalidate PCI transaction
- pci_set_pcie_reset_state (9)
- set reset state for device dev
- pci_set_power_state (9)
- Set the power state of a PCI device
- pci_sriov_get_totalvfs (9)
- - get total VFs supported on this device
- pci_sriov_set_totalvfs (9)
- - reduce the TotalVFs available
- pci_stop_and_remove_bus_device (9)
- remove a PCI device and any children
- pci_store_saved_state (9)
- Allocate and return an opaque struct containing t...
- pci_try_reset_bus (9)
- Try to reset a PCI bus
- pci_try_reset_function (9)
- quiesce and reset a PCI device function
- pci_try_reset_slot (9)
- Try to reset a PCI slot
- pci_try_set_mwi (9)
- enables memory-write-invalidate PCI transaction
- pci_unmap_rom (9)
- unmap the ROM from kernel space
- pci_unregister_driver (9)
- unregister a pci driver
- pci_vfs_assigned (9)
- returns number of VFs are assigned to a guest
- pci_wait_for_pending_transaction (9)
- waits for pending transaction
- pci_wake_from_d3 (9)
- enable/disable device to wake up from D3_hot or D3_cold
- pci_write_legacy_io (9)
- write byte(s) to legacy I/O port space
- pci_write_rom (9)
- used to enable access to the PCI ROM display
- pci_write_vpd (9)
- Write entry to Vital Product Data
- pciconfig_iobase (2)
- pci device information handling
- pciconfig_read (2)
- pci device information handling
- pciconfig_write (2)
- pci device information handling
- pcie_get_minimum_link (9)
- determine minimum link settings of a PCI device
- pcie_get_mps (9)
- get PCI Express maximum payload size
- pcie_get_readrq (9)
- get PCI Express read request size
- pcie_set_mps (9)
- set PCI Express maximum payload size
- pcie_set_readrq (9)
- set PCI Express maximum memory read request
- pcilib (7)
- a library for accessing PCI devices
- pcim_enable_device (9)
- Managed pci_enable_device
- pcim_pin_device (9)
- Pin managed PCI device
- pcix_get_max_mmrbc (9)
- get PCI-X maximum designed memory read byte count
- pcix_get_mmrbc (9)
- get PCI-X maximum memory read byte count
- pcix_set_mmrbc (9)
- set PCI-X maximum memory read byte count
- pclose (3)
- pipe stream to or from a process
- pclose (3p)
- close a pipe stream to or from a process
- PCPIntro (3)
- introduction to the Performance Co-Pilot (PCP) libraries
- pcre (3)
- Perl-compatible regular expressions (original API)
- pcre-config (1)
- program to return PCRE configuration
- pcre16 (3)
- Perl-compatible regular expressions
- pcre16_assign_jit_stack (3)
- Perl-compatible regular expressions
- pcre16_compile (3)
- Perl-compatible regular expressions
- pcre16_compile2 (3)
- Perl-compatible regular expressions
- pcre16_config (3)
- Perl-compatible regular expressions
- pcre16_copy_named_substring (3)
- Perl-compatible regular expressions
- pcre16_copy_substring (3)
- Perl-compatible regular expressions
- pcre16_dfa_exec (3)
- Perl-compatible regular expressions
- pcre16_exec (3)
- Perl-compatible regular expressions
- pcre16_free_study (3)
- Perl-compatible regular expressions
- pcre16_free_substring (3)
- Perl-compatible regular expressions
- pcre16_free_substring_list (3)
- Perl-compatible regular expressions
- pcre16_fullinfo (3)
- Perl-compatible regular expressions
- pcre16_get_named_substring (3)
- Perl-compatible regular expressions
- pcre16_get_stringnumber (3)
- Perl-compatible regular expressions
- pcre16_get_stringtable_entries (3)
- Perl-compatible regular expressions
- pcre16_get_substring (3)
- Perl-compatible regular expressions
- pcre16_get_substring_list (3)
- Perl-compatible regular expressions
- pcre16_jit_exec (3)
- Perl-compatible regular expressions
- pcre16_jit_stack_alloc (3)
- Perl-compatible regular expressions
- pcre16_jit_stack_free (3)
- Perl-compatible regular expressions
- pcre16_maketables (3)
- Perl-compatible regular expressions
- pcre16_pattern_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre16_refcount (3)
- Perl-compatible regular expressions
- pcre16_study (3)
- Perl-compatible regular expressions
- pcre16_utf16_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre16_version (3)
- Perl-compatible regular expressions
- pcre2 (3)
- Perl-compatible regular expressions (revised API)
- pcre2-config (1)
- program to return PCRE2 configuration
- pcre2_callout_enumerate (3)
- Perl-compatible regular expressions (revised API)
- pcre2_code_copy (3)
- Perl-compatible regular expressions (revised API)
- pcre2_code_copy_with_tables (3)
- Perl-compatible regular expressions (revise...
- pcre2_code_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_compile (3)
- Perl-compatible regular expressions (revised API)
- pcre2_compile_context_copy (3)
- Perl-compatible regular expressions (revised...
- pcre2_compile_context_create (3)
- Perl-compatible regular expressions (revis...
- pcre2_compile_context_free (3)
- Perl-compatible regular expressions (revised...
- pcre2_convert_context_copy (3)
- Perl-compatible regular expressions (revised...
- pcre2_convert_context_create (3)
- Perl-compatible regular expressions (revis...
- pcre2_convert_context_free (3)
- Perl-compatible regular expressions (revised...
- pcre2_converted_pattern_free (3)
- Perl-compatible regular expressions (revis...
- pcre2_dfa_match (3)
- Perl-compatible regular expressions (revised API)
- pcre2_general_context_copy (3)
- Perl-compatible regular expressions (revised...
- pcre2_general_context_create (3)
- Perl-compatible regular expressions (revis...
- pcre2_general_context_free (3)
- Perl-compatible regular expressions (revised...
- pcre2_get_error_message (3)
- Perl-compatible regular expressions (revised API)
- pcre2_get_mark (3)
- Perl-compatible regular expressions (revised API)
- pcre2_get_match_data_size (3)
- Perl-compatible regular expressions (revised ...
- pcre2_get_ovector_count (3)
- Perl-compatible regular expressions (revised API)
- pcre2_get_ovector_pointer (3)
- Perl-compatible regular expressions (revised ...
- pcre2_get_startchar (3)
- Perl-compatible regular expressions (revised API)
- pcre2_jit_compile (3)
- Perl-compatible regular expressions (revised API)
- pcre2_jit_free_unused_memory (3)
- Perl-compatible regular expressions (revis...
- pcre2_jit_match (3)
- Perl-compatible regular expressions (revised API)
- pcre2_jit_stack_assign (3)
- Perl-compatible regular expressions (revised API)
- pcre2_jit_stack_create (3)
- Perl-compatible regular expressions (revised API)
- pcre2_jit_stack_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_maketables (3)
- Perl-compatible regular expressions (revised API)
- pcre2_maketables_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match_context_copy (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match_context_create (3)
- Perl-compatible regular expressions (revised...
- pcre2_match_context_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match_data_create (3)
- Perl-compatible regular expressions (revised API)
- pcre2_match_data_create_from_pattern (3)
- Perl-compatible regular expression...
- pcre2_match_data_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_pattern_convert (3)
- Perl-compatible regular expressions (revised API)
- pcre2_pattern_info (3)
- Perl-compatible regular expressions (revised API)
- pcre2_serialize_decode (3)
- Perl-compatible regular expressions (revised API)
- pcre2_serialize_encode (3)
- Perl-compatible regular expressions (revised API)
- pcre2_serialize_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_serialize_get_number_of_codes (3)
- Perl-compatible regular expressions...
- pcre2_set_bsr (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_callout (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_character_tables (3)
- Perl-compatible regular expressions (revised...
- pcre2_set_compile_extra_options (3)
- Perl-compatible regular expressions (re...
- pcre2_set_compile_recursion_guard (3)
- Perl-compatible regular expressions (...
- pcre2_set_depth_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_glob_escape (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_glob_separator (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_heap_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_match_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_max_pattern_length (3)
- Perl-compatible regular expressions (revis...
- pcre2_set_newline (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_offset_limit (3)
- Perl-compatible regular expressions (revised API)
- pcre2_set_parens_nest_limit (3)
- Perl-compatible regular expressions (revise...
- pcre2_set_recursion_limit (3)
- Perl-compatible regular expressions (revised ...
- pcre2_set_recursion_memory_management (3)
- Perl-compatible regular expressio...
- pcre2_set_substitute_callout (3)
- Perl-compatible regular expressions (revis...
- pcre2_substitute (3)
- Perl-compatible regular expressions (revised API)
- pcre2_substring_copy_byname (3)
- Perl-compatible regular expressions (revise...
- pcre2_substring_copy_bynumber (3)
- Perl-compatible regular expressions (revi...
- pcre2_substring_free (3)
- Perl-compatible regular expressions (revised API)
- pcre2_substring_get_byname (3)
- Perl-compatible regular expressions (revised...
- pcre2_substring_get_bynumber (3)
- Perl-compatible regular expressions (revis...
- pcre2_substring_length_byname (3)
- Perl-compatible regular expressions (revi...
- pcre2_substring_length_bynumber (3)
- Perl-compatible regular expressions (re...
- pcre2_substring_list_free (3)
- Perl-compatible regular expressions (revised ...
- pcre2_substring_list_get (3)
- Perl-compatible regular expressions (revised API)
- pcre2_substring_nametable_scan (3)
- Perl-compatible regular expressions (rev...
- pcre2_substring_number_from_name (3)
- Perl-compatible regular expressions (r...
- pcre2api (3)
- Perl-compatible regular expressions (revised API)
- pcre2build (3)
- Perl-compatible regular expressions (revised API)
- pcre2callout (3)
- Perl-compatible regular expressions (revised API)
- pcre2compat (3)
- Perl-compatible regular expressions (revised API)
- pcre2convert (3)
- Perl-compatible regular expressions (revised API)
- pcre2grep (1)
- a grep with Perl-compatible regular expressions.
- pcre2jit (3)
- Perl-compatible regular expressions (revised API)
- pcre2limits (3)
- Perl-compatible regular expressions (revised API)
- pcre2matching (3)
- Perl-compatible regular expressions (revised API)
- pcre2partial (3)
- Perl-compatible regular expressions
- pcre2pattern (3)
- Perl-compatible regular expressions (revised API)
- pcre2perform (3)
- Perl-compatible regular expressions (revised API)
- pcre2posix (3)
- Perl-compatible regular expressions (revised API)
- pcre2sample (3)
- Perl-compatible regular expressions (revised API)
- pcre2serialize (3)
- Perl-compatible regular expressions (revised API)
- pcre2syntax (3)
- Perl-compatible regular expressions (revised API)
- pcre2test (1)
- a program for testing Perl-compatible regular expressi...
- pcre32 (3)
- Perl-compatible regular expressions
- pcre32_assign_jit_stack (3)
- Perl-compatible regular expressions
- pcre32_compile (3)
- Perl-compatible regular expressions
- pcre32_compile2 (3)
- Perl-compatible regular expressions
- pcre32_config (3)
- Perl-compatible regular expressions
- pcre32_copy_named_substring (3)
- Perl-compatible regular expressions
- pcre32_copy_substring (3)
- Perl-compatible regular expressions
- pcre32_dfa_exec (3)
- Perl-compatible regular expressions
- pcre32_exec (3)
- Perl-compatible regular expressions
- pcre32_free_study (3)
- Perl-compatible regular expressions
- pcre32_free_substring (3)
- Perl-compatible regular expressions
- pcre32_free_substring_list (3)
- Perl-compatible regular expressions
- pcre32_fullinfo (3)
- Perl-compatible regular expressions
- pcre32_get_named_substring (3)
- Perl-compatible regular expressions
- pcre32_get_stringnumber (3)
- Perl-compatible regular expressions
- pcre32_get_stringtable_entries (3)
- Perl-compatible regular expressions
- pcre32_get_substring (3)
- Perl-compatible regular expressions
- pcre32_get_substring_list (3)
- Perl-compatible regular expressions
- pcre32_jit_exec (3)
- Perl-compatible regular expressions
- pcre32_jit_stack_alloc (3)
- Perl-compatible regular expressions
- pcre32_jit_stack_free (3)
- Perl-compatible regular expressions
- pcre32_maketables (3)
- Perl-compatible regular expressions
- pcre32_pattern_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre32_refcount (3)
- Perl-compatible regular expressions
- pcre32_study (3)
- Perl-compatible regular expressions
- pcre32_utf32_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre32_version (3)
- Perl-compatible regular expressions
- pcre_assign_jit_stack (3)
- Perl-compatible regular expressions
- pcre_compile (3)
- Perl-compatible regular expressions
- pcre_compile2 (3)
- Perl-compatible regular expressions
- pcre_config (3)
- Perl-compatible regular expressions
- pcre_copy_named_substring (3)
- Perl-compatible regular expressions
- pcre_copy_substring (3)
- Perl-compatible regular expressions
- pcre_dfa_exec (3)
- Perl-compatible regular expressions
- pcre_exec (3)
- Perl-compatible regular expressions
- pcre_free_study (3)
- Perl-compatible regular expressions
- pcre_free_substring (3)
- Perl-compatible regular expressions
- pcre_free_substring_list (3)
- Perl-compatible regular expressions
- pcre_fullinfo (3)
- Perl-compatible regular expressions
- pcre_get_named_substring (3)
- Perl-compatible regular expressions
- pcre_get_stringnumber (3)
- Perl-compatible regular expressions
- pcre_get_stringtable_entries (3)
- Perl-compatible regular expressions
- pcre_get_substring (3)
- Perl-compatible regular expressions
- pcre_get_substring_list (3)
- Perl-compatible regular expressions
- pcre_jit_exec (3)
- Perl-compatible regular expressions
- pcre_jit_stack_alloc (3)
- Perl-compatible regular expressions
- pcre_jit_stack_free (3)
- Perl-compatible regular expressions
- pcre_maketables (3)
- Perl-compatible regular expressions
- pcre_pattern_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre_refcount (3)
- Perl-compatible regular expressions
- pcre_study (3)
- Perl-compatible regular expressions
- pcre_table (5)
- format of Postfix PCRE tables
- pcre_utf16_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre_utf32_to_host_byte_order (3)
- Perl-compatible regular expressions
- pcre_version (3)
- Perl-compatible regular expressions
- pcreapi (3)
- Perl-compatible regular expressions
- pcrebuild (3)
- Perl-compatible regular expressions
- pcrecallout (3)
- Perl-compatible regular expressions
- pcrecompat (3)
- Perl-compatible regular expressions
- pcrecpp (3)
- Perl-compatible regular expressions.
- pcregrep (1)
- a grep with Perl-compatible regular expressions.
- pcrejit (3)
- Perl-compatible regular expressions
- pcrelimits (3)
- Perl-compatible regular expressions
- pcrematching (3)
- Perl-compatible regular expressions
- pcrepartial (3)
- Perl-compatible regular expressions
- pcrepattern (3)
- Perl-compatible regular expressions
- pcreperform (3)
- Perl-compatible regular expressions
- pcreposix (3)
- Perl-compatible regular expressions.
- pcreprecompile (3)
- Perl-compatible regular expressions
- pcresample (3)
- Perl-compatible regular expressions
- pcrestack (3)
- Perl-compatible regular expressions
- pcresyntax (3)
- Perl-compatible regular expressions
- pcretest (1)
- a program for testing Perl-compatible regular expressi...
- pcreunicode (3)
- Perl-compatible regular expressions
- pcsc-spy (1)
- A PC/SC spy command
- pcscd (8)
- PC/SC Smart Card Daemon
- pcxtoppm (1)
- convert a PCX file into a PPM image
- perlipc (1)
- Perl interprocess communication (signals, fifos, pipes...
- plipconfig (8)
- fine tune PLIP device parameters
- plugctl (1)
- a program to get or set any MPR or PCR register value
- plugreport (1)
- a program to read all MPR/PCR registers from all devic...
- pmDupContext (3)
- duplicate a PMAPI context
- pmlookupipc (3)
- IPC version infrastructure support
- pnmtopclxl (1)
- convert a PNM image to an HP LaserJet PCL XL printer s...
- ppmtolj (1)
- convert a PPM image to an HP LaserJet PCL 5 Color file
- ppmtopcx (1)
- convert a PPM image to a PCX file
- ppmtopjxl (1)
- convert a PPM image to an HP PaintJet XL PCL file
- pptpctrl (8)
- PPTP control connection manager
- rawshark (1)
- Dump and analyze raw pcap data
- reader.conf (5)
- configuration file for pcscd readers' drivers
- registerrpc (3)
- library routines for remote procedure calls
- rpc (3)
- library routines for remote procedure calls
- rpc (3t)
- library routines for remote procedure calls
- rpc (5)
- RPC program number data base
- rpc.dracd (8)
- Dynamic Relay Authorization Control server
- rpc.gssd (8)
- RPCSEC_GSS daemon
- rpc.idmapd (8)
- NFSv4 ID <-> Name Mapper
- rpc.mountd (8)
- NFS mount daemon
- rpc.nfsd (8)
- NFS server process
- rpc.sm-notify (8)
- send reboot notifications to NFS peers
- rpc.statd (8)
- NSM service daemon
- rpc.svcgssd (8)
- server-side rpcsec_gss daemon
- RPC::PlClient (3pm)
- Perl extension for writing PlRPC clients
- RPC::PlServer (3pm)
- Perl extension for writing PlRPC servers
- RPC::XML (3pm)
- A set of classes for core data, message and XML handling
- RPC::XML::Client (3pm)
- An XML-RPC client class
- RPC::XML::Parser (3pm)
- Interface for parsers created by RPC::XML::ParserFac...
- RPC::XML::Parser::XMLLibXML (3pm)
- A container class for XML::LibXML
- RPC::XML::Parser::XMLParser (3pm)
- A container class for XML::Parser
- RPC::XML::ParserFactory (3pm)
- A factory class for RPC::XML::Parser objects
- RPC::XML::Procedure (3pm)
- Object encapsulation of server-side RPC procedures
- RPC::XML::Server (3pm)
- A server base-class for XML-RPC
- rpc_add_pipe_dir_object (9)
- associate a rpc_pipe_dir_object to a directory
- rpc_alloc_iostats (9)
- allocate an rpc_iostats structure
- rpc_bind_new_program (9)
- bind a new RPC program to an existing client
- rpc_clnt_calls (3t)
- library routines for client side calls
- rpc_call_async (9)
- Perform an asynchronous RPC call
- rpc_call_sync (9)
- Perform a synchronous RPC call
- rpc_clone_client (9)
- Clone an RPC client structure
- rpc_clone_client_set_auth (9)
- Clone an RPC client structure and set its auth
- rpc_count_iostats (9)
- tally up per-task stats
- rpc_create (9)
- create an RPC client and transport with one call
- rpc_find_or_alloc_pipe_dir_object (9)
- (unknown subject)
- rpc_force_rebind (9)
- force transport to check that remote port is unchanged
- rpc_free (9)
- free buffer allocated via rpc_malloc
- rpc_free_iostats (9)
- release an rpc_iostats structure
- rpc_get_timeout (9)
- Get timeout for transport in units of HZ
- rpc_init_pipe_dir_head (9)
- initialise a struct rpc_pipe_dir_head
- rpc_init_pipe_dir_object (9)
- initialise a struct rpc_pipe_dir_object
- rpc_localaddr (9)
- discover local endpoint address for an RPC client
- rpc_malloc (9)
- allocate an RPC buffer
- rpc_max_payload (9)
- Get maximum payload size for a transport, in bytes
- rpc_mkpipe_dentry (9)
- make an rpc_pipefs file for kernel<->userspace commun...
- rpc_net_ns (9)
- Get the network namespace for this RPC client
- rpc_peeraddr (9)
- extract remote peer address from clnt's xprt
- rpc_peeraddr2str (9)
- return remote peer address in printable format
- rpc_protocol (9)
- Get transport protocol number for an RPC client
- rpc_queue_upcall (9)
- queue an upcall message to userspace
- rpc_svc_reg (3t)
- library routines for registering servers
- rpc_remove_pipe_dir_object (9)
- remove a rpc_pipe_dir_object from a directory
- rpc_run_task (9)
- Allocate a new RPC task, then run rpc_execute against it
- rpc_secure (3t)
- library routines for secure remote procedure calls
- rpc_svc_calls (3t)
- library routines for RPC servers
- rpc_svc_create (3t)
- library routines for the creation of server handles
- rpc_svc_err (3t)
- library routines for server side remote procedure call...
- rpc_switch_client_transport (9)
- (unknown subject)
- rpc_unlink (9)
- remove a pipe
- rpc_wake_up (9)
- wake up all rpc_tasks
- rpc_wake_up_status (9)
- wake up all rpc_tasks and set their status value.
- rpc_xdr (3t)
- XDR library routines for remote procedure calls
- rpcb_getport_async (9)
- obtain the port for a given RPC service on a given host
- rpcbind (8)
- universal addresses to RPC program number mapper
- rpcclient (1)
- tool for executing client side MS-RPC functions
- rpcdebug (8)
- set and clear NFS and RPC kernel debug flags
- rpcgen (1)
- an RPC protocol compiler
- rpcinfo (8)
- report RPC information
- scsi_bios_ptable (9)
- Read PC partition table out of first sector of device.
- scsi_partsize (9)
- Parse cylinders/heads/sectors from PC partition table
- scsi_report_opcode (9)
- Find out if a given command opcode is supported
- setpci (8)
- configure PCI devices
- setrpcent (3)
- get RPC entry
- sg_opcodes (8)
- report supported SCSI commands or task management func...
- slapcat (8)
- SLAPD database to LDIF utility
- slapo-pcache (5)
- proxy cache overlay to slapd
- snd_ac97_pcm_assign (9)
- assign AC97 slots to given PCM streams
- snd_ac97_pcm_close (9)
- closes the given AC97 pcm
- snd_ac97_pcm_double_rate_rules (9)
- set double rate constraints
- snd_ac97_pcm_open (9)
- opens the given AC97 pcm
- snd_pcm_add_chmap_ctls (9)
- create channel-mapping control elements
- snd_pcm_capture_empty (9)
- check whether the capture buffer is empty
- snd_pcm_capture_ready (9)
- check whether the capture buffer is available
- snd_pcm_format_big_endian (9)
- Check the PCM format is big-endian
- snd_pcm_format_cpu_endian (9)
- Check the PCM format is CPU-endian
- snd_pcm_format_linear (9)
- Check the PCM format is linear
- snd_pcm_format_little_endian (9)
- Check the PCM format is little-endian
- snd_pcm_format_physical_width (9)
- return the physical bit-width of the format
- snd_pcm_format_set_silence (9)
- set the silence data on the buffer
- snd_pcm_format_signed (9)
- Check the PCM format is signed linear
- snd_pcm_format_silence_64 (9)
- return the silent data in 8 bytes array
- snd_pcm_format_size (9)
- return the byte size of samples on the given format
- snd_pcm_format_unsigned (9)
- Check the PCM format is unsigned linear
- snd_pcm_format_width (9)
- return the bit-width of the format
- snd_pcm_hw_constraint_integer (9)
- apply an integer constraint to an interval
- snd_pcm_hw_constraint_list (9)
- apply a list of constraints to a parameter
- snd_pcm_hw_constraint_mask64 (9)
- apply the given bitmap mask constraint
- snd_pcm_hw_constraint_minmax (9)
- apply a min/max range constraint to an int...
- snd_pcm_hw_constraint_msbits (9)
- add a hw constraint msbits rule
- snd_pcm_hw_constraint_pow2 (9)
- add a hw constraint power-of-2 rule
- snd_pcm_hw_constraint_ratdens (9)
- apply ratdens constraint to a parameter
- snd_pcm_hw_constraint_ratnums (9)
- apply ratnums constraint to a parameter
- snd_pcm_hw_constraint_step (9)
- add a hw constraint step rule
- snd_pcm_hw_param_first (9)
- refine config space and return minimum value
- snd_pcm_hw_param_last (9)
- refine config space and return maximum value
- snd_pcm_hw_param_value (9)
- return params field var value
- snd_pcm_hw_rule_add (9)
- add the hw-constraint rule
- snd_pcm_hw_rule_noresample (9)
- add a rule to allow disabling hw resampling
- snd_pcm_lib_alloc_vmalloc_32_buffer (9)
- allocate 32-bit-addressable buffer
- snd_pcm_lib_alloc_vmalloc_buffer (9)
- allocate virtual DMA buffer
- snd_pcm_lib_free_pages (9)
- release the allocated DMA buffer.
- snd_pcm_lib_free_vmalloc_buffer (9)
- free vmalloc buffer
- snd_pcm_lib_get_vmalloc_page (9)
- map vmalloc buffer offset to page struct
- snd_pcm_lib_ioctl (9)
- a generic PCM ioctl callback
- snd_pcm_lib_malloc_pages (9)
- allocate the DMA buffer
- snd_pcm_lib_preallocate_free_for_all (9)
- release all pre-allocated buffers ...
- snd_pcm_lib_preallocate_pages (9)
- pre-allocation for the given DMA type
- snd_pcm_lib_preallocate_pages_for_all (9)
- pre-allocation for continuous mem...
- snd_pcm_limit_hw_rates (9)
- determine rate_min/rate_max fields
- snd_pcm_new (9)
- create a new PCM instance
- snd_pcm_new_internal (9)
- create a new internal PCM instance
- snd_pcm_new_stream (9)
- create a new PCM stream
- snd_pcm_period_elapsed (9)
- update the pcm status for the next period
- snd_pcm_playback_data (9)
- check whether any data exists on the playback buffer
- snd_pcm_playback_empty (9)
- check whether the playback buffer is empty
- snd_pcm_playback_ready (9)
- check whether the playback buffer is available
- snd_pcm_rate_bit_to_rate (9)
- converts SNDRV_PCM_RATE_xxx bit to sample rate
- snd_pcm_rate_mask_intersect (9)
- computes the intersection between two rate ...
- snd_pcm_rate_to_rate_bit (9)
- converts sample rate to SNDRV_PCM_RATE_xxx bit
- snd_pcm_set_ops (9)
- set the PCM operators
- snd_pcm_set_sync (9)
- set the PCM sync id
- snd_pcm_sgbuf_ops_page (9)
- get the page struct at the given offset
- snd_pcm_stop (9)
- try to stop all running streams in the substream group
- snd_pcm_stream_str (9)
- Get a string naming the direction of a stream
- snd_pcm_suspend (9)
- trigger SUSPEND to all linked streams
- snd_pcm_suspend_all (9)
- trigger SUSPEND to all substreams in the given pcm
- snmpcmd (1)
- options and behaviour common to most of the Net-SNMP c...
- snmpconf (1)
- creates and modifies SNMP configuration files
- spctoppm (1)
- convert an Atari compressed Spectrum file to a PPM
- sss_rpcidmapd (5)
- sss plugin configuration directives for rpc.idmapd
- stpcpy (3)
- copy a string returning a pointer to its end
- stpcpy (3p)
- copy a string and return a pointer to the end of the r...
- svc_find_xprt (9)
- find an RPC transport instance
- svcgssd (8)
- server-side rpcsec_gss daemon
- svipc (7)
- System V interprocess communication mechanisms
- swapcontext (3)
- manipulate user context
- sys_ipc.h (0p)
- XSI interprocess communication access structure
- syslinux2ansi (1)
- converts a syslinux-format screen to pc-ansi
- systemd-coredumpctl (1)
- Retrieve coredumps from the journal
- Tcl_GetTopChannel (3)
- manipulate stacked I/O channels
- Tcl_MakeTcpClientChannel (3)
- procedures to open channels using TCP sockets
- Tcl_OpenTcpClient (3)
- procedures to open channels using TCP sockets
- Tcl_RegExpCompile (3)
- Pattern matching with regular expressions
- text2pcap (1)
- Generate a capture file from an ASCII hexdump of packets
- udhcpc (8)
- very small DHCP client
- update-pciids (8)
- download new version of the PCI ID list
- usb_hcd_pci_probe (9)
- initialize PCI-based HCDs
- usb_hcd_pci_remove (9)
- shutdown processing for PCI-based HCDs
- usb_hcd_pci_shutdown (9)
- shutdown host controller
- wcpcpy (3)
- copy a wide-character string, returning a pointer to i...
- wcpcpy (3p)
- copy a wide-character string, returning a pointer to i...
- wmempcpy (3)
- copy memory area
- XcmsLookupColor (3)
- obtain color values
- XCreatePixmapCursor (3)
- create cursors
- XLookupColor (3)
- obtain color values
- XpCancelDoc (3)
- Cancels a print document.
- XpCancelJob (3)
- Cancels a single print job.
- XpCancelPage (3)
- Cancels a print page.
- XpCreateContext (3)
- Creates and initializes a new print context.
- xprt_lookup_rqst (9)
- find an RPC request corresponding to an XID
- XtAppCreateShell (3)
- create top-level widget instance
- xtrapchar (1x)
- XTrap sample clients
- XtVaAppCreateShell (3)
- create top-level widget instance
- ypcat (1)
- print values of all keys in a NIS database
- ypchfn (1)
- change your password in the NIS database
- ypchsh (1)
- change your password in the NIS database
- zipcloak (1)
- encrypt entries in a zipfile
- zshcompctl (1)
- zsh programmable completion
home | help