OpenSuSE Man Pages
home |
help
- BIO_reset (3osslssl-3)
- BIO control operations
- PPIx::Regexp::Structure::BranchReset (3)
- Represent a branch reset group
- PPIx::Regexp::Structure::BranchReset (3pm)
- Represent a branch reset group
- PPIx::Regexp::Token::GroupType::Branc... (3)
- Represent a branch reset speci...
- PPIx::Regexp::Token::GroupType::Branc... (3pm)
- Represent a branch reset spe...
- RESET (7pg161)
- restore the value of a run-time parameter to the defau...
- __pci_reset_function (9)
- reset a PCI device function
- __pci_reset_function_locked (9)
- reset a PCI device function while holding t...
- __pmResetIPC (3)
- IPC version infrastructure support
- __relay_reset (9)
- reset a channel buffer
- ata_bus_probe (9)
- Reset and probe ATA bus
- ata_std_postreset (9)
- standard postreset callback
- ata_std_prereset (9)
- prepare for reset
- ata_wait_after_reset (9)
- wait for link to become ready after reset
- auparse_reset (3)
- reset audit parser instance
- auto_reset (n)
- standard library of Tcl procedures
- avc_reset (3)
- userspace SELinux AVC setup and teardown
- BIO_ctrl_reset_read_request (3osslssl-3)
- BIO pair BIO
- bio_reset (9)
- reinitialize a bio
- blk_set_default_limits (9)
- reset limits to default values
- clearerr (3)
- check and reset stream status
- curl_easy_reset (3)
- reset all options of a libcurl session handle
- drm_mode_config_reset (9)
- call - >reset callbacks
- drm_vma_node_reset (9)
- Initialize or reset node object
- el_reset (3)
- line editor, history and tokenization functions
- el_tok_reset (3)
- line editor, history and tokenization functions
- EVP_CIPHER_CTX_reset (3osslssl-3)
- EVP cipher routines
- EVP_KDF_CTX_reset (3osslssl-3)
- EVP KDF routines
- EVP_MD_CTX_reset (3osslssl-3)
- EVP digest routines
- feof (3)
- check and reset stream status
- ferror (3)
- check and reset stream status
- fileno (3)
- check and reset stream status
- genphy_soft_reset (9)
- software reset the PHY via BMCR_RESET bit
- git-reset (1)
- Reset current HEAD to the specified state
- glClear (3gl)
- clear buffers to preset values
- glResetHistogram (3gl)
- reset histogram table entries to zero
- glResetMinmax (3gl)
- reset minmax table entries to initial values
- gpg-preset-passphrase (1)
- Put a passphrase into gpg-agent's cache
- HMAC_CTX_reset (3osslssl-3)
- HMAC message authentication code
- i2o_iop_reset (9)
- reset an I2O controller
- input_reset_device (9)
- reset/restore the state of input device
- kbdrate (8)
- reset the keyboard repeat rate and delay time
- kfifo_reset (9)
- removes the entire fifo content
- kfifo_reset_out (9)
- skip fifo content
- KickStart (9)
- Perform hard reset of MPT adapter.
- kmsg_dump_rewind (9)
- reset the interator
- list_safe_reset_next (9)
- reset a stale list_for_each_entry_safe loop
- mpt_diag_reset (9)
- Perform hard reset of the adapter.
- mpt_fault_reset_work (9)
- work performed on workq after ioc fault
- mpt_HardResetHandler (9)
- Generic reset handler
- mpt_ioc_reset (9)
- Base cleanup for hard reset
- mpt_reset_deregister (9)
- Deregister protocol-specific IOC reset handler.
- mpt_reset_register (9)
- Register protocol-specific IOC reset handler.
- mpt_Soft_Hard_ResetHandler (9)
- Try less expensive reset
- mpt_SoftResetHandler (9)
- Issues a less expensive reset
- mptscsih_bus_reset (9)
- Perform a SCSI BUS_RESET! new_eh variant
- mptscsih_dev_reset (9)
- Perform a SCSI TARGET_RESET! new_eh variant
- mptscsih_host_reset (9)
- Perform a SCSI host adapter RESET (new_eh variant)
- netdev_reset_queue (9)
- reset the packets and bytes count of a network device
- OSSL_CMP_CTX_reset_geninfo_ITAVs (3osslssl-3)
- functions for managing the CM...
- pci_probe_reset_bus (9)
- probe whether a PCI bus can be reset
- pci_probe_reset_slot (9)
- probe whether a PCI slot can be reset
- pci_reset_bridge_secondary_bus (9)
- Reset the secondary bus on a PCI bridge.
- pci_reset_bus (9)
- reset a PCI bus
- pci_reset_function (9)
- quiesce and reset a PCI device function
- pci_reset_slot (9)
- reset a PCI slot
- pci_set_pcie_reset_state (9)
- set reset state for device dev
- pci_try_reset_bus (9)
- Try to reset a PCI bus
- pci_try_reset_function (9)
- quiesce and reset a PCI device function
- pci_try_reset_slot (9)
- Try to reset a PCI slot
- pg_resetwal (1pg161)
- reset the write-ahead log and other control informatio...
- phy_poll_reset (9)
- Safely wait until a PHY reset has properly completed
- pmdaEventResetArray (3)
- utilities for PMDAs to build packed arrays of event...
- relay_reset (9)
- reset the channel
- reset (1)
- terminal initialization
- reset_prog_mode (3ncurses)
- low-level curses routines
- reset_prog_mode_sp (3ncurses)
- curses screen-pointer extension
- reset_shell_mode (3ncurses)
- low-level curses routines
- reset_shell_mode_sp (3ncurses)
- curses screen-pointer extension
- resetty (3ncurses)
- low-level curses routines
- resetty_sp (3ncurses)
- curses screen-pointer extension
- rewind (3p)
- reset the file position indicator in a stream
- rewinddir (3)
- reset directory stream
- rewinddir (3p)
- reset the position of a directory stream to the beginn...
- sata_link_hardreset (9)
- reset link via SATA phy reset
- sata_std_hardreset (9)
- COMRESET w/o waiting or classification
- scsi_nonblockable_ioctl (9)
- Handle SG_SCSI_RESET
- seccomp_reset (3)
- Initialize the seccomp filter state
- SendIocReset (9)
- Send IOCReset request to MPT adapter.
- setgrent (3p)
- reset the group database to the first entry
- setutxent (3p)
- reset the user accounting database to the first entry
- sg_reset (8)
- sends SCSI device, target, bus or host reset; or check...
- SSL_clear (3osslssl-3)
- reset SSL object to allow another connection
- systemd.preset (5)
- Service enablement presets
- Tcl_LimitTypeReset (3)
- manage and check resource limits on interpreters
- Tcl_ResetResult (3)
- manipulate Tcl result
- Tk_ResetUserInactiveTime (3)
- discover user inactivity time
- usb_ep_clear_halt (9)
- clears endpoint halt, and resets toggle
- usb_lock_device_for_reset (9)
- cautiously acquire the lock for a usb device ...
- usb_queue_reset_device (9)
- Reset a USB device from an atomic context
- usb_reset_configuration (9)
- lightweight device reset
- usb_reset_device (9)
- warn interface drivers and perform a USB port reset
- usb_reset_endpoint (9)
- Reset an endpoint's state.
- uuid_clear (3)
- reset value of UUID variable to the NULL value
- w1_reset_bus (9)
- Issues a reset bus sequence.
- w1_reset_resume_command (9)
- resume instead of another match ROM
- w1_reset_select_slave (9)
- reset and select a slave
- wimax_reset (9)
- Reset a WiMAX device
- xcb_sync_reset_fence (3)
- (unknown subject)
- xcb_sync_reset_fence_checked (3)
- (unknown subject)
- XkbGetAutoResetControls (3)
- Gets the current values of the auto-reset controls
- XkbSetAutoResetControls (3)
- Changes the current values of the AutoReset con...
- XmbResetIC (3)
- reset the state of an input context
- XResetScreenSaver (3)
- manipulate the screen saver
- xtrapreset (1x)
- XTrap sample clients
- Xutf8ResetIC (3)
- reset the state of an input context
- XwcResetIC (3)
- reset the state of an input context
home | help